| // SPDX-License-Identifier: GPL-2.0 | 
 | /* | 
 |  *   Focusrite Scarlett 2 Protocol Driver for ALSA | 
 |  *   (including Scarlett 2nd Gen, 3rd Gen, 4th Gen, Clarett USB, and | 
 |  *   Clarett+ series products) | 
 |  * | 
 |  *   Supported models: | 
 |  *   - 6i6/18i8/18i20 Gen 2 | 
 |  *   - Solo/2i2/4i4/8i6/18i8/18i20 Gen 3 | 
 |  *   - Solo/2i2/4i4 Gen 4 | 
 |  *   - Clarett 2Pre/4Pre/8Pre USB | 
 |  *   - Clarett+ 2Pre/4Pre/8Pre | 
 |  * | 
 |  *   Copyright (c) 2018-2024 by Geoffrey D. Bennett <g at b4.vu> | 
 |  *   Copyright (c) 2020-2021 by Vladimir Sadovnikov <sadko4u@gmail.com> | 
 |  *   Copyright (c) 2022 by Christian Colglazier <christian@cacolglazier.com> | 
 |  * | 
 |  *   Based on the Scarlett (Gen 1) Driver for ALSA: | 
 |  * | 
 |  *   Copyright (c) 2013 by Tobias Hoffmann | 
 |  *   Copyright (c) 2013 by Robin Gareus <robin at gareus.org> | 
 |  *   Copyright (c) 2002 by Takashi Iwai <tiwai at suse.de> | 
 |  *   Copyright (c) 2014 by Chris J Arges <chris.j.arges at canonical.com> | 
 |  * | 
 |  *   Many codes borrowed from audio.c by | 
 |  *     Alan Cox (alan at lxorguk.ukuu.org.uk) | 
 |  *     Thomas Sailer (sailer at ife.ee.ethz.ch) | 
 |  * | 
 |  *   Code cleanup: | 
 |  *   David Henningsson <david.henningsson at canonical.com> | 
 |  */ | 
 |  | 
 | /* The protocol was reverse engineered by looking at the communication | 
 |  * between Focusrite Control 2.3.4 and the Focusrite(R) Scarlett 18i20 | 
 |  * (firmware 1083) using usbmon in July-August 2018. | 
 |  * | 
 |  * Scarlett 18i8 support added in April 2019. | 
 |  * | 
 |  * Scarlett 6i6 support added in June 2019 (thanks to Martin Wittmann | 
 |  * for providing usbmon output and testing). | 
 |  * | 
 |  * Scarlett 4i4/8i6 Gen 3 support added in May 2020 (thanks to Laurent | 
 |  * Debricon for donating a 4i4 and to Fredrik Unger for providing 8i6 | 
 |  * usbmon output and testing). | 
 |  * | 
 |  * Scarlett 18i8/18i20 Gen 3 support added in June 2020 (thanks to | 
 |  * Darren Jaeckel, Alex Sedlack, and Clovis Lunel for providing usbmon | 
 |  * output, protocol traces and testing). | 
 |  * | 
 |  * Support for loading mixer volume and mux configuration from the | 
 |  * interface during driver initialisation added in May 2021 (thanks to | 
 |  * Vladimir Sadovnikov for figuring out how). | 
 |  * | 
 |  * Support for Solo/2i2 Gen 3 added in May 2021 (thanks to Alexander | 
 |  * Vorona for 2i2 protocol traces). | 
 |  * | 
 |  * Support for phantom power, direct monitoring, speaker switching, | 
 |  * and talkback added in May-June 2021. | 
 |  * | 
 |  * Support for Clarett+ 8Pre added in Aug 2022 by Christian | 
 |  * Colglazier. | 
 |  * | 
 |  * Support for Clarett 8Pre USB added in Sep 2023 (thanks to Philippe | 
 |  * Perrot for confirmation). | 
 |  * | 
 |  * Support for Clarett+ 4Pre and 2Pre added in Sep 2023 (thanks to | 
 |  * Gregory Rozzo for donating a 4Pre, and David Sherwood and Patrice | 
 |  * Peterson for usbmon output). | 
 |  * | 
 |  * Support for Clarett 2Pre and 4Pre USB added in Oct 2023. | 
 |  * | 
 |  * Support for firmware updates added in Dec 2023. | 
 |  * | 
 |  * Support for Scarlett Solo/2i2/4i4 Gen 4 added in Dec 2023 (thanks | 
 |  * to many LinuxMusicians people and to Focusrite for hardware | 
 |  * donations). | 
 |  * | 
 |  * This ALSA mixer gives access to (model-dependent): | 
 |  *  - input, output, mixer-matrix muxes | 
 |  *  - mixer-matrix gain stages | 
 |  *  - gain/volume/mute controls | 
 |  *  - level meters | 
 |  *  - line/inst level, pad, and air controls | 
 |  *  - phantom power, direct monitor, speaker switching, and talkback | 
 |  *    controls | 
 |  *  - disable/enable MSD mode | 
 |  *  - disable/enable standalone mode | 
 |  *  - input mute, gain, autogain, safe mode | 
 |  *  - direct monitor mixes | 
 |  *  - compressor and EQ | 
 |  *  - Bluetooth volume | 
 |  * | 
 |  * <ditaa> | 
 |  *    /--------------\    18chn            20chn     /--------------\ | 
 |  *    | Hardware  in +--+------\    /-------------+--+ ALSA PCM out | | 
 |  *    \--------------/  |      |    |             |  \--------------/ | 
 |  *                      |      |    |    /-----\  | | 
 |  *                      |      |    |    |     |  | | 
 |  *                      |      v    v    v     |  | | 
 |  *                      |   +---------------+  |  | | 
 |  *                      |    \ Matrix  Mux /   |  | | 
 |  *                      |     +-----+-----+    |  | | 
 |  *                      |           |          |  | | 
 |  *                      |           |18chn     |  | | 
 |  *                      |           |          |  | | 
 |  *                      |           |     10chn|  | | 
 |  *                      |           v          |  | | 
 |  *                      |     +------------+   |  | | 
 |  *                      |     | Mixer      |   |  | | 
 |  *                      |     |     Matrix |   |  | | 
 |  *                      |     |            |   |  | | 
 |  *                      |     | 18x10 Gain |   |  | | 
 |  *                      |     |   stages   |   |  | | 
 |  *                      |     +-----+------+   |  | | 
 |  *                      |           |          |  | | 
 |  *                      |18chn      |10chn     |  |20chn | 
 |  *                      |           |          |  | | 
 |  *                      |           +----------/  | | 
 |  *                      |           |             | | 
 |  *                      v           v             v | 
 |  *                      =========================== | 
 |  *               +---------------+       +--—------------+ | 
 |  *                \ Output  Mux /         \ Capture Mux / | 
 |  *                 +---+---+---+           +-----+-----+ | 
 |  *                     |   |                     | | 
 |  *                10chn|   |                     |18chn | 
 |  *                     |   |                     | | 
 |  *  /--------------\   |   |                     |   /--------------\ | 
 |  *  | S/PDIF, ADAT |<--/   |10chn                \-->| ALSA PCM in  | | 
 |  *  | Hardware out |       |                         \--------------/ | 
 |  *  \--------------/       | | 
 |  *                         v | 
 |  *                  +-------------+    Software gain per channel. | 
 |  *                  | Master Gain |<-- 18i20 only: Switch per channel | 
 |  *                  +------+------+    to select HW or SW gain control. | 
 |  *                         | | 
 |  *                         |10chn | 
 |  *  /--------------\       | | 
 |  *  | Analogue     |<------/ | 
 |  *  | Hardware out | | 
 |  *  \--------------/ | 
 |  * </ditaa> | 
 |  * | 
 |  * Gen 3/4 devices have a Mass Storage Device (MSD) mode where a small | 
 |  * disk with registration and driver download information is presented | 
 |  * to the host. To access the full functionality of the device without | 
 |  * proprietary software, MSD mode can be disabled by: | 
 |  * - holding down the 48V button for five seconds while powering on | 
 |  *   the device, or | 
 |  * - using this driver and alsamixer to change the "MSD Mode" setting | 
 |  *   to Off and power-cycling the device | 
 |  */ | 
 |  | 
 | #include <linux/slab.h> | 
 | #include <linux/usb.h> | 
 | #include <linux/moduleparam.h> | 
 |  | 
 | #include <sound/control.h> | 
 | #include <sound/tlv.h> | 
 | #include <sound/hwdep.h> | 
 |  | 
 | #include <uapi/sound/scarlett2.h> | 
 |  | 
 | #include "usbaudio.h" | 
 | #include "mixer.h" | 
 | #include "helper.h" | 
 |  | 
 | #include "mixer_scarlett2.h" | 
 | #include "fcp.h" | 
 |  | 
 | /* device_setup value to allow turning MSD mode back on */ | 
 | #define SCARLETT2_MSD_ENABLE 0x02 | 
 |  | 
 | /* device_setup value to disable this mixer driver */ | 
 | #define SCARLETT2_DISABLE 0x04 | 
 |  | 
 | /* device_setup value to use the FCP driver instead */ | 
 | #define SCARLETT2_USE_FCP_DRIVER 0x08 | 
 |  | 
 | /* some gui mixers can't handle negative ctl values */ | 
 | #define SCARLETT2_VOLUME_BIAS 127 | 
 |  | 
 | /* maximum preamp input gain value | 
 |  * (the corresponding value in dB is per-device) | 
 |  */ | 
 | #define SCARLETT2_MAX_GAIN_VALUE 70 | 
 |  | 
 | /* maximum Bluetooth volume value */ | 
 | #define SCARLETT2_MAX_BLUETOOTH_VOLUME 30 | 
 |  | 
 | /* mixer range from -80dB to +12dB in 0.5dB steps */ | 
 | #define SCARLETT2_MIXER_MIN_DB -80 | 
 | #define SCARLETT2_MIXER_BIAS (-SCARLETT2_MIXER_MIN_DB * 2) | 
 | #define SCARLETT2_MIXER_MAX_DB 12 | 
 | #define SCARLETT2_MIXER_MAX_VALUE \ | 
 | 	((SCARLETT2_MIXER_MAX_DB - SCARLETT2_MIXER_MIN_DB) * 2) | 
 | #define SCARLETT2_MIXER_VALUE_COUNT (SCARLETT2_MIXER_MAX_VALUE + 1) | 
 |  | 
 | /* map from (dB + 80) * 2 to mixer value | 
 |  * for dB in 0 .. 184: int(8192 * pow(10, ((dB - 160) / 2 / 20))) | 
 |  */ | 
 | static const u16 scarlett2_mixer_values[SCARLETT2_MIXER_VALUE_COUNT] = { | 
 | 	0, 0, 0, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 2, 2, 2, 2, 2, | 
 | 	2, 2, 3, 3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 6, 6, 6, 7, 7, 8, 8, | 
 | 	9, 9, 10, 10, 11, 12, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, | 
 | 	23, 24, 25, 27, 29, 30, 32, 34, 36, 38, 41, 43, 46, 48, 51, | 
 | 	54, 57, 61, 65, 68, 73, 77, 81, 86, 91, 97, 103, 109, 115, | 
 | 	122, 129, 137, 145, 154, 163, 173, 183, 194, 205, 217, 230, | 
 | 	244, 259, 274, 290, 307, 326, 345, 365, 387, 410, 434, 460, | 
 | 	487, 516, 547, 579, 614, 650, 689, 730, 773, 819, 867, 919, | 
 | 	973, 1031, 1092, 1157, 1225, 1298, 1375, 1456, 1543, 1634, | 
 | 	1731, 1833, 1942, 2057, 2179, 2308, 2445, 2590, 2744, 2906, | 
 | 	3078, 3261, 3454, 3659, 3876, 4105, 4349, 4606, 4879, 5168, | 
 | 	5475, 5799, 6143, 6507, 6892, 7301, 7733, 8192, 8677, 9191, | 
 | 	9736, 10313, 10924, 11571, 12257, 12983, 13752, 14567, 15430, | 
 | 	16345, 17313, 18339, 19426, 20577, 21796, 23088, 24456, 25905, | 
 | 	27440, 29066, 30788, 32612 | 
 | }; | 
 |  | 
 | /* Maximum number of analogue outputs */ | 
 | #define SCARLETT2_ANALOGUE_MAX 10 | 
 |  | 
 | /* Maximum number of various input controls */ | 
 | #define SCARLETT2_LEVEL_SWITCH_MAX 2 | 
 | #define SCARLETT2_PAD_SWITCH_MAX 8 | 
 | #define SCARLETT2_AIR_SWITCH_MAX 8 | 
 | #define SCARLETT2_DSP_SWITCH_MAX 2 | 
 | #define SCARLETT2_INPUT_MUTE_SWITCH_MAX 2 | 
 | #define SCARLETT2_PHANTOM_SWITCH_MAX 2 | 
 | #define SCARLETT2_INPUT_GAIN_MAX 2 | 
 |  | 
 | /* Maximum number of inputs to the mixer */ | 
 | #define SCARLETT2_INPUT_MIX_MAX 25 | 
 |  | 
 | /* Maximum number of outputs from the mixer */ | 
 | #define SCARLETT2_OUTPUT_MIX_MAX 12 | 
 |  | 
 | /* Maximum number of mixer gain controls */ | 
 | #define SCARLETT2_MIX_MAX (SCARLETT2_INPUT_MIX_MAX * SCARLETT2_OUTPUT_MIX_MAX) | 
 |  | 
 | /* Maximum number of direct monitor mixer gain controls | 
 |  * 1 (Solo) or 2 (2i2) direct monitor selections (Mono & Stereo) | 
 |  * 2 Mix outputs (A/Left & B/Right) | 
 |  * 4 Mix inputs | 
 |  */ | 
 | #define SCARLETT2_MONITOR_MIX_MAX (2 * 2 * 4) | 
 |  | 
 | /* Maximum size of the data in the USB mux assignment message: | 
 |  * 20 inputs, 20 outputs, 25 matrix inputs, 12 spare | 
 |  */ | 
 | #define SCARLETT2_MUX_MAX 77 | 
 |  | 
 | /* Maximum number of sources (sum of input port counts) */ | 
 | #define SCARLETT2_MAX_SRCS 52 | 
 |  | 
 | /* Maximum number of meters (sum of output port counts) */ | 
 | #define SCARLETT2_MAX_METERS 65 | 
 |  | 
 | /* Compressor parameter data | 
 |  * | 
 |  * The compressor parameters are 32-bit fixed point values with 24 | 
 |  * bits of fraction. Integer values are sufficient for the parameters | 
 |  * except for ratio which we can set in 0.5:1 steps. | 
 |  */ | 
 | struct compressor_param { | 
 | 	const char          *name; | 
 | 	snd_ctl_elem_type_t  type; | 
 | 	s32                  min; | 
 | 	s32                  max; | 
 | 	int                  scale_bits; | 
 | }; | 
 |  | 
 | /* The available compressor parameters on the Vocaster: | 
 |  * - Enable: Off, On | 
 |  * - Threshold: -40dB to 0dB | 
 |  * - Ratio: 1:1 to 50:1 in 0.5:1 steps | 
 |  * - Knee Width: 0dB to 10dB | 
 |  * - Attack: 30ms to 127ms | 
 |  * - Release: 30ms to 127ms | 
 |  * - Makeup Gain: 0dB to 24dB | 
 |  */ | 
 | static const struct compressor_param compressor_params[] = { | 
 | 	{ "Enable",      SNDRV_CTL_ELEM_TYPE_BOOLEAN,   0,   1,  0 }, | 
 | 	{ "Threshold",   SNDRV_CTL_ELEM_TYPE_INTEGER, -40,   0, 24 }, | 
 | 	{ "Ratio",       SNDRV_CTL_ELEM_TYPE_INTEGER,   2, 100, 23 }, | 
 | 	{ "Knee Width",  SNDRV_CTL_ELEM_TYPE_INTEGER,   0,  10, 24 }, | 
 | 	{ "Attack",      SNDRV_CTL_ELEM_TYPE_INTEGER,  30, 127, 24 }, | 
 | 	{ "Release",     SNDRV_CTL_ELEM_TYPE_INTEGER,  30, 127, 24 }, | 
 | 	{ "Makeup Gain", SNDRV_CTL_ELEM_TYPE_INTEGER,   0,  24, 24 }, | 
 | }; | 
 |  | 
 | #define SCARLETT2_COMPRESSOR_PARAM_COUNT ARRAY_SIZE(compressor_params) | 
 | #define SCARLETT2_COMPRESSOR_CTLS_MAX \ | 
 | 	(SCARLETT2_COMPRESSOR_PARAM_COUNT * SCARLETT2_DSP_SWITCH_MAX) | 
 |  | 
 | /* Maximum number of filter controls */ | 
 | #define SCARLETT2_PRECOMP_FLT_CTLS_MAX (2 * SCARLETT2_DSP_SWITCH_MAX) | 
 | #define SCARLETT2_PEQ_FLT_CTLS_MAX (3 * SCARLETT2_DSP_SWITCH_MAX) | 
 |  | 
 | /* Number of biquad filter coefficients */ | 
 | #define SCARLETT2_BIQUAD_COEFFS 5 | 
 |  | 
 | /* Maximum number of filter coefficient values */ | 
 | #define SCARLETT2_PRECOMP_FLT_VALUES_MAX \ | 
 | 	(SCARLETT2_PRECOMP_FLT_CTLS_MAX * SCARLETT2_BIQUAD_COEFFS) | 
 | #define SCARLETT2_PEQ_FLT_VALUES_MAX \ | 
 | 	(SCARLETT2_PEQ_FLT_CTLS_MAX * SCARLETT2_BIQUAD_COEFFS) | 
 |  | 
 | /* Maximum number of PEQ filter slots */ | 
 | #define SCARLETT2_PEQ_FLT_SLOTS_MAX 4 | 
 |  | 
 | /* Hardware port types: | 
 |  * - None (no input to mux) | 
 |  * - Analogue I/O | 
 |  * - S/PDIF I/O | 
 |  * - ADAT I/O | 
 |  * - Mixer I/O | 
 |  * - PCM I/O | 
 |  */ | 
 | enum { | 
 | 	SCARLETT2_PORT_TYPE_NONE, | 
 | 	SCARLETT2_PORT_TYPE_ANALOGUE, | 
 | 	SCARLETT2_PORT_TYPE_SPDIF, | 
 | 	SCARLETT2_PORT_TYPE_ADAT, | 
 | 	SCARLETT2_PORT_TYPE_MIX, | 
 | 	SCARLETT2_PORT_TYPE_PCM, | 
 | 	SCARLETT2_PORT_TYPE_COUNT | 
 | }; | 
 |  | 
 | /* I/O count of each port type kept in struct scarlett2_ports */ | 
 | enum { | 
 | 	SCARLETT2_PORT_IN, | 
 | 	SCARLETT2_PORT_OUT, | 
 | 	SCARLETT2_PORT_DIRNS | 
 | }; | 
 |  | 
 | /* Dim/Mute buttons on the 18i20 */ | 
 | enum { | 
 | 	SCARLETT2_BUTTON_MUTE, | 
 | 	SCARLETT2_BUTTON_DIM, | 
 | 	SCARLETT2_DIM_MUTE_COUNT | 
 | }; | 
 |  | 
 | /* Autogain target values */ | 
 |  | 
 | #define SCARLETT2_AG_TARGET_MIN (-30) | 
 |  | 
 | enum { | 
 | 	SCARLETT2_AG_HOT_TARGET, | 
 | 	SCARLETT2_AG_MEAN_TARGET, | 
 | 	SCARLETT2_AG_PEAK_TARGET, | 
 | 	SCARLETT2_AG_TARGET_COUNT | 
 | }; | 
 |  | 
 | /* Flash Write State */ | 
 | enum { | 
 | 	SCARLETT2_FLASH_WRITE_STATE_IDLE, | 
 | 	SCARLETT2_FLASH_WRITE_STATE_SELECTED, | 
 | 	SCARLETT2_FLASH_WRITE_STATE_ERASING, | 
 | 	SCARLETT2_FLASH_WRITE_STATE_WRITE | 
 | }; | 
 |  | 
 | static const char *const scarlett2_dim_mute_names[SCARLETT2_DIM_MUTE_COUNT] = { | 
 | 	"Mute Playback Switch", "Dim Playback Switch" | 
 | }; | 
 |  | 
 | /* The autogain_status is set based on the autogain_switch and | 
 |  * raw_autogain_status values. | 
 |  * | 
 |  * If autogain_switch is set, autogain_status is set to 0 (Running). | 
 |  * The other status values are from the raw_autogain_status value + 1. | 
 |  */ | 
 | static const char *const scarlett2_autogain_status_gen4[] = { | 
 | 	"Running", | 
 | 	"Success", | 
 | 	"SuccessDRover", | 
 | 	"WarnMinGainLimit", | 
 | 	"FailDRunder", | 
 | 	"FailMaxGainLimit", | 
 | 	"FailClipped", | 
 | 	"Cancelled", | 
 | 	"Invalid", | 
 | 	NULL | 
 | }; | 
 |  | 
 | static const char *const scarlett2_autogain_status_vocaster[] = { | 
 | 	"Running", | 
 | 	"Success", | 
 | 	"FailPG", | 
 | 	"FailRange", | 
 | 	"WarnMaxCap", | 
 | 	"WarnMinCap", | 
 | 	"Cancelled", | 
 | 	"Invalid", | 
 | 	NULL | 
 | }; | 
 |  | 
 | /* Power Status Values */ | 
 | enum { | 
 | 	SCARLETT2_POWER_STATUS_EXT, | 
 | 	SCARLETT2_POWER_STATUS_BUS, | 
 | 	SCARLETT2_POWER_STATUS_FAIL, | 
 | 	SCARLETT2_POWER_STATUS_COUNT | 
 | }; | 
 |  | 
 | /* Notification callback functions */ | 
 | struct scarlett2_notification { | 
 | 	u32 mask; | 
 | 	void (*func)(struct usb_mixer_interface *mixer); | 
 | }; | 
 |  | 
 | static void scarlett2_notify_ack(struct usb_mixer_interface *mixer); | 
 | static void scarlett2_notify_sync(struct usb_mixer_interface *mixer); | 
 | static void scarlett2_notify_dim_mute(struct usb_mixer_interface *mixer); | 
 | static void scarlett2_notify_monitor(struct usb_mixer_interface *mixer); | 
 | static void scarlett2_notify_volume(struct usb_mixer_interface *mixer); | 
 | static void scarlett2_notify_input_level(struct usb_mixer_interface *mixer); | 
 | static void scarlett2_notify_input_pad(struct usb_mixer_interface *mixer); | 
 | static void scarlett2_notify_input_air(struct usb_mixer_interface *mixer); | 
 | static void scarlett2_notify_input_dsp(struct usb_mixer_interface *mixer); | 
 | static void scarlett2_notify_input_mute(struct usb_mixer_interface *mixer); | 
 | static void scarlett2_notify_input_phantom(struct usb_mixer_interface *mixer); | 
 | static void scarlett2_notify_input_other(struct usb_mixer_interface *mixer); | 
 | static void scarlett2_notify_input_select(struct usb_mixer_interface *mixer); | 
 | static void scarlett2_notify_input_gain(struct usb_mixer_interface *mixer); | 
 | static void scarlett2_notify_autogain(struct usb_mixer_interface *mixer); | 
 | static void scarlett2_notify_input_safe(struct usb_mixer_interface *mixer); | 
 | static void scarlett2_notify_monitor_other(struct usb_mixer_interface *mixer); | 
 | static void scarlett2_notify_direct_monitor(struct usb_mixer_interface *mixer); | 
 | static void scarlett2_notify_power_status(struct usb_mixer_interface *mixer); | 
 | static void scarlett2_notify_pcm_input_switch( | 
 | 					struct usb_mixer_interface *mixer); | 
 | static void scarlett2_notify_bluetooth(struct usb_mixer_interface *mixer); | 
 |  | 
 | /* Arrays of notification callback functions */ | 
 |  | 
 | static const struct scarlett2_notification scarlett2_notifications[] = { | 
 | 	{ 0x00000001, scarlett2_notify_ack }, | 
 | 	{ 0x00000008, scarlett2_notify_sync }, | 
 | 	{ 0x00200000, scarlett2_notify_dim_mute }, | 
 | 	{ 0x00400000, scarlett2_notify_monitor }, | 
 | 	{ 0x00800000, scarlett2_notify_input_other }, | 
 | 	{ 0x01000000, scarlett2_notify_monitor_other }, | 
 | 	{ 0, NULL } | 
 | }; | 
 |  | 
 | static const struct scarlett2_notification scarlett3a_notifications[] = { | 
 | 	{ 0x00000001, scarlett2_notify_ack }, | 
 | 	{ 0x00800000, scarlett2_notify_input_other }, | 
 | 	{ 0x01000000, scarlett2_notify_direct_monitor }, | 
 | 	{ 0, NULL } | 
 | }; | 
 |  | 
 | static const struct scarlett2_notification vocaster_notifications[] = { | 
 | 	{ 0x00000001, scarlett2_notify_ack }, | 
 | 	{ 0x00000008, scarlett2_notify_sync }, | 
 | 	{ 0x00200000, scarlett2_notify_input_mute }, | 
 | 	{ 0x00400000, scarlett2_notify_autogain }, | 
 | 	{ 0x04000000, scarlett2_notify_input_dsp }, | 
 | 	{ 0x08000000, scarlett2_notify_input_gain }, | 
 | 	{ 0x10000000, scarlett2_notify_input_phantom }, | 
 | 	{ 0x20000000, scarlett2_notify_bluetooth }, | 
 | 	{ 0, NULL } | 
 | }; | 
 |  | 
 | static const struct scarlett2_notification scarlett4_solo_notifications[] = { | 
 | 	{ 0x00000001, scarlett2_notify_ack }, | 
 | 	{ 0x00000008, scarlett2_notify_sync }, | 
 | 	{ 0x00400000, scarlett2_notify_input_air }, | 
 | 	{ 0x00800000, scarlett2_notify_direct_monitor }, | 
 | 	{ 0x01000000, scarlett2_notify_input_level }, | 
 | 	{ 0x02000000, scarlett2_notify_input_phantom }, | 
 | 	{ 0x04000000, scarlett2_notify_pcm_input_switch }, | 
 | 	{ 0, NULL } | 
 | }; | 
 |  | 
 | static const struct scarlett2_notification scarlett4_2i2_notifications[] = { | 
 | 	{ 0x00000001, scarlett2_notify_ack }, | 
 | 	{ 0x00000008, scarlett2_notify_sync }, | 
 | 	{ 0x00200000, scarlett2_notify_input_safe }, | 
 | 	{ 0x00400000, scarlett2_notify_autogain }, | 
 | 	{ 0x00800000, scarlett2_notify_input_air }, | 
 | 	{ 0x01000000, scarlett2_notify_direct_monitor }, | 
 | 	{ 0x02000000, scarlett2_notify_input_select }, | 
 | 	{ 0x04000000, scarlett2_notify_input_level }, | 
 | 	{ 0x08000000, scarlett2_notify_input_phantom }, | 
 | 	{ 0x10000000, NULL }, /* power status, ignored */ | 
 | 	{ 0x40000000, scarlett2_notify_input_gain }, | 
 | 	{ 0x80000000, NULL }, /* power status, ignored */ | 
 | 	{ 0, NULL } | 
 | }; | 
 |  | 
 | static const struct scarlett2_notification scarlett4_4i4_notifications[] = { | 
 | 	{ 0x00000001, scarlett2_notify_ack }, | 
 | 	{ 0x00000008, scarlett2_notify_sync }, | 
 | 	{ 0x00200000, scarlett2_notify_input_safe }, | 
 | 	{ 0x00400000, scarlett2_notify_autogain }, | 
 | 	{ 0x00800000, scarlett2_notify_input_air }, | 
 | 	{ 0x01000000, scarlett2_notify_input_select }, | 
 | 	{ 0x02000000, scarlett2_notify_input_level }, | 
 | 	{ 0x04000000, scarlett2_notify_input_phantom }, | 
 | 	{ 0x08000000, scarlett2_notify_power_status }, /* power external */ | 
 | 	{ 0x20000000, scarlett2_notify_input_gain }, | 
 | 	{ 0x40000000, scarlett2_notify_power_status }, /* power status */ | 
 | 	{ 0x80000000, scarlett2_notify_volume }, | 
 | 	{ 0, NULL } | 
 | }; | 
 |  | 
 | /* Configuration parameters that can be read and written */ | 
 | enum { | 
 | 	SCARLETT2_CONFIG_DIM_MUTE, | 
 | 	SCARLETT2_CONFIG_LINE_OUT_VOLUME, | 
 | 	SCARLETT2_CONFIG_MUTE_SWITCH, | 
 | 	SCARLETT2_CONFIG_SW_HW_SWITCH, | 
 | 	SCARLETT2_CONFIG_MASTER_VOLUME, | 
 | 	SCARLETT2_CONFIG_HEADPHONE_VOLUME, | 
 | 	SCARLETT2_CONFIG_LEVEL_SWITCH, | 
 | 	SCARLETT2_CONFIG_PAD_SWITCH, | 
 | 	SCARLETT2_CONFIG_MSD_SWITCH, | 
 | 	SCARLETT2_CONFIG_AIR_SWITCH, | 
 | 	SCARLETT2_CONFIG_DSP_SWITCH, | 
 | 	SCARLETT2_CONFIG_COMPRESSOR_PARAMS, | 
 | 	SCARLETT2_CONFIG_PRECOMP_FLT_SWITCH, | 
 | 	SCARLETT2_CONFIG_PRECOMP_FLT_PARAMS, | 
 | 	SCARLETT2_CONFIG_PEQ_FLT_SWITCH, | 
 | 	SCARLETT2_CONFIG_PEQ_FLT_PARAMS, | 
 | 	SCARLETT2_CONFIG_INPUT_MUTE_SWITCH, | 
 | 	SCARLETT2_CONFIG_STANDALONE_SWITCH, | 
 | 	SCARLETT2_CONFIG_PHANTOM_SWITCH, | 
 | 	SCARLETT2_CONFIG_PHANTOM_PERSISTENCE, | 
 | 	SCARLETT2_CONFIG_DIRECT_MONITOR, | 
 | 	SCARLETT2_CONFIG_MONITOR_OTHER_SWITCH, | 
 | 	SCARLETT2_CONFIG_MONITOR_OTHER_ENABLE, | 
 | 	SCARLETT2_CONFIG_TALKBACK_MAP, | 
 | 	SCARLETT2_CONFIG_AUTOGAIN_SWITCH, | 
 | 	SCARLETT2_CONFIG_AUTOGAIN_STATUS, | 
 | 	SCARLETT2_CONFIG_AG_HOT_TARGET, | 
 | 	SCARLETT2_CONFIG_AG_MEAN_TARGET, | 
 | 	SCARLETT2_CONFIG_AG_PEAK_TARGET, | 
 | 	SCARLETT2_CONFIG_INPUT_GAIN, | 
 | 	SCARLETT2_CONFIG_SAFE_SWITCH, | 
 | 	SCARLETT2_CONFIG_INPUT_SELECT_SWITCH, | 
 | 	SCARLETT2_CONFIG_INPUT_LINK_SWITCH, | 
 | 	SCARLETT2_CONFIG_POWER_EXT, | 
 | 	SCARLETT2_CONFIG_POWER_LOW, | 
 | 	SCARLETT2_CONFIG_PCM_INPUT_SWITCH, | 
 | 	SCARLETT2_CONFIG_DIRECT_MONITOR_GAIN, | 
 | 	SCARLETT2_CONFIG_BLUETOOTH_VOLUME, | 
 | 	SCARLETT2_CONFIG_SPDIF_MODE, | 
 | 	SCARLETT2_CONFIG_COUNT | 
 | }; | 
 |  | 
 | /* Autogain target configuration parameters and names */ | 
 |  | 
 | static const int scarlett2_ag_target_configs[] = { | 
 | 	[SCARLETT2_AG_HOT_TARGET]  = SCARLETT2_CONFIG_AG_HOT_TARGET, | 
 | 	[SCARLETT2_AG_MEAN_TARGET] = SCARLETT2_CONFIG_AG_MEAN_TARGET, | 
 | 	[SCARLETT2_AG_PEAK_TARGET] = SCARLETT2_CONFIG_AG_PEAK_TARGET | 
 | }; | 
 |  | 
 | static const char *const scarlett2_ag_target_names[] = { | 
 | 	"Hot", "Mean", "Peak" | 
 | }; | 
 |  | 
 | /* Location, size, and activation command number for the configuration | 
 |  * parameters. Size is in bits and may be 1, 8, 16, or 32. | 
 |  * | 
 |  * Vocaster and 4th Gen devices have a parameter buffer to set certain | 
 |  * configuration parameters. When pbuf is set, rather than writing to | 
 |  * the given offset, the channel and value are written to the | 
 |  * parameter buffer and the activate command is sent to the device. | 
 |  * | 
 |  * Some Gen 4 configuration parameters are written with 0x02 for a | 
 |  * desired value of 0x01, and 0x03 for 0x00. These are indicated with | 
 |  * mute set to 1. 0x02 and 0x03 are temporary values while the device | 
 |  * makes the change and the channel and/or corresponding DSP channel | 
 |  * output is muted. | 
 |  */ | 
 | struct scarlett2_config { | 
 | 	u16 offset; | 
 | 	u8 size; | 
 | 	u8 activate; | 
 | 	u8 pbuf; | 
 | 	u8 mute; | 
 | }; | 
 |  | 
 | struct scarlett2_config_set { | 
 | 	const struct scarlett2_notification *notifications; | 
 | 	u16 param_buf_addr; | 
 | 	const unsigned int *input_gain_tlv; | 
 | 	const char *const *autogain_status_texts; | 
 | 	const struct scarlett2_config items[SCARLETT2_CONFIG_COUNT]; | 
 | }; | 
 |  | 
 | /* Input gain TLV dB ranges */ | 
 |  | 
 | static const DECLARE_TLV_DB_MINMAX( | 
 | 	db_scale_vocaster_gain, 0, 70 * 100 | 
 | ); | 
 |  | 
 | static const DECLARE_TLV_DB_MINMAX( | 
 | 	db_scale_gen4_gain, 0, 69 * 100 | 
 | ); | 
 |  | 
 | /* Gen 2 devices without SW/HW volume switch: 6i6, 18i8 */ | 
 |  | 
 | static const struct scarlett2_config_set scarlett2_config_set_gen2a = { | 
 | 	.notifications = scarlett2_notifications, | 
 | 	.items = { | 
 | 		[SCARLETT2_CONFIG_LINE_OUT_VOLUME] = { | 
 | 			.offset = 0x34, .size = 16, .activate = 1 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_MUTE_SWITCH] = { | 
 | 			.offset = 0x5c, .size = 8, .activate = 1 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_LEVEL_SWITCH] = { | 
 | 			.offset = 0x7c, .size = 8, .activate = 7 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_PAD_SWITCH] = { | 
 | 			.offset = 0x84, .size = 8, .activate = 8 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_STANDALONE_SWITCH] = { | 
 | 			.offset = 0x8d, .size = 8, .activate = 6 }, | 
 | 	} | 
 | }; | 
 |  | 
 | /* Gen 2 devices with SW/HW volume switch: 18i20 */ | 
 |  | 
 | static const struct scarlett2_config_set scarlett2_config_set_gen2b = { | 
 | 	.notifications = scarlett2_notifications, | 
 | 	.items = { | 
 | 		[SCARLETT2_CONFIG_DIM_MUTE] = { | 
 | 			.offset = 0x31, .size = 8, .activate = 2 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_LINE_OUT_VOLUME] = { | 
 | 			.offset = 0x34, .size = 16, .activate = 1 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_MUTE_SWITCH] = { | 
 | 			.offset = 0x5c, .size = 8, .activate = 1 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_SW_HW_SWITCH] = { | 
 | 			.offset = 0x66, .size = 8, .activate = 3 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_MASTER_VOLUME] = { | 
 | 			.offset = 0x76, .size = 16 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_LEVEL_SWITCH] = { | 
 | 			.offset = 0x7c, .size = 8, .activate = 7 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_PAD_SWITCH] = { | 
 | 			.offset = 0x84, .size = 8, .activate = 8 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_STANDALONE_SWITCH] = { | 
 | 			.offset = 0x8d, .size = 8, .activate = 6 }, | 
 | 	} | 
 | }; | 
 |  | 
 | /* Gen 3 devices without a mixer (Solo and 2i2) */ | 
 | static const struct scarlett2_config_set scarlett2_config_set_gen3a = { | 
 | 	.notifications = scarlett3a_notifications, | 
 | 	.items = { | 
 | 		[SCARLETT2_CONFIG_MSD_SWITCH] = { | 
 | 			.offset = 0x04, .size = 8, .activate = 6 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_PHANTOM_PERSISTENCE] = { | 
 | 			.offset = 0x05, .size = 8, .activate = 6 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_PHANTOM_SWITCH] = { | 
 | 			.offset = 0x06, .size = 8, .activate = 3 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_DIRECT_MONITOR] = { | 
 | 			.offset = 0x07, .size = 8, .activate = 4 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_LEVEL_SWITCH] = { | 
 | 			.offset = 0x08, .size = 1, .activate = 7 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_AIR_SWITCH] = { | 
 | 			.offset = 0x09, .size = 1, .activate = 8 }, | 
 | 	} | 
 | }; | 
 |  | 
 | /* Gen 3 devices without SW/HW volume switch: 4i4, 8i6 */ | 
 | static const struct scarlett2_config_set scarlett2_config_set_gen3b = { | 
 | 	.notifications = scarlett2_notifications, | 
 | 	.items = { | 
 | 		[SCARLETT2_CONFIG_LINE_OUT_VOLUME] = { | 
 | 			.offset = 0x34, .size = 16, .activate = 1 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_MUTE_SWITCH] = { | 
 | 			.offset = 0x5c, .size = 8, .activate = 1 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_LEVEL_SWITCH] = { | 
 | 			.offset = 0x7c, .size = 8, .activate = 7 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_PAD_SWITCH] = { | 
 | 			.offset = 0x84, .size = 8, .activate = 8 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_AIR_SWITCH] = { | 
 | 			.offset = 0x8c, .size = 8, .activate = 8 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_STANDALONE_SWITCH] = { | 
 | 			.offset = 0x95, .size = 8, .activate = 6 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_PHANTOM_SWITCH] = { | 
 | 			.offset = 0x9c, .size = 1, .activate = 8 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_MSD_SWITCH] = { | 
 | 			.offset = 0x9d, .size = 8, .activate = 6 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_PHANTOM_PERSISTENCE] = { | 
 | 			.offset = 0x9e, .size = 8, .activate = 6 }, | 
 | 	} | 
 | }; | 
 |  | 
 | /* Gen 3 devices with SW/HW volume switch: 18i8, 18i20 */ | 
 | static const struct scarlett2_config_set scarlett2_config_set_gen3c = { | 
 | 	.notifications = scarlett2_notifications, | 
 | 	.items = { | 
 | 		[SCARLETT2_CONFIG_DIM_MUTE] = { | 
 | 			.offset = 0x31, .size = 8, .activate = 2 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_LINE_OUT_VOLUME] = { | 
 | 			.offset = 0x34, .size = 16, .activate = 1 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_MUTE_SWITCH] = { | 
 | 			.offset = 0x5c, .size = 8, .activate = 1 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_SW_HW_SWITCH] = { | 
 | 			.offset = 0x66, .size = 8, .activate = 3 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_MASTER_VOLUME] = { | 
 | 			.offset = 0x76, .size = 16 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_LEVEL_SWITCH] = { | 
 | 			.offset = 0x7c, .size = 8, .activate = 7 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_PAD_SWITCH] = { | 
 | 			.offset = 0x84, .size = 8, .activate = 8 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_AIR_SWITCH] = { | 
 | 			.offset = 0x8c, .size = 8, .activate = 8 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_STANDALONE_SWITCH] = { | 
 | 			.offset = 0x95, .size = 8, .activate = 6 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_PHANTOM_SWITCH] = { | 
 | 			.offset = 0x9c, .size = 1, .activate = 8 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_MSD_SWITCH] = { | 
 | 			.offset = 0x9d, .size = 8, .activate = 6 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_PHANTOM_PERSISTENCE] = { | 
 | 			.offset = 0x9e, .size = 8, .activate = 6 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_MONITOR_OTHER_SWITCH] = { | 
 | 			.offset = 0x9f, .size = 1, .activate = 10 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_MONITOR_OTHER_ENABLE] = { | 
 | 			.offset = 0xa0, .size = 1, .activate = 10 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_TALKBACK_MAP] = { | 
 | 			.offset = 0xb0, .size = 16, .activate = 10 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_SPDIF_MODE] = { | 
 | 			.offset = 0x94, .size = 8, .activate = 6 }, | 
 | 	} | 
 | }; | 
 |  | 
 | /* Vocaster */ | 
 | static const struct scarlett2_config_set scarlett2_config_set_vocaster = { | 
 | 	.notifications = vocaster_notifications, | 
 | 	.param_buf_addr = 0x1bc, | 
 | 	.input_gain_tlv = db_scale_vocaster_gain, | 
 | 	.autogain_status_texts = scarlett2_autogain_status_vocaster, | 
 | 	.items = { | 
 | 		[SCARLETT2_CONFIG_MSD_SWITCH] = { | 
 | 			.offset = 0x9d, .size = 8, .activate = 6 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_AUTOGAIN_SWITCH] = { | 
 | 			.offset = 0x1c0, .size = 8, .activate = 19, .pbuf = 1 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_AUTOGAIN_STATUS] = { | 
 | 			.offset = 0x1c2, .size = 8, }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_AG_HOT_TARGET] = { | 
 | 			.offset = 0xc1, .size = 8, .activate = 29, .pbuf = 1 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_INPUT_GAIN] = { | 
 | 			.offset = 0x9f, .size = 8, .activate = 21, .pbuf = 1 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_PHANTOM_SWITCH] = { | 
 | 			.offset = 0x9c, .size = 1, .activate = 20, .pbuf = 1 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_DSP_SWITCH] = { | 
 | 			.offset = 0x1c4, .size = 8, .activate = 22, .pbuf = 1 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_COMPRESSOR_PARAMS] = { | 
 | 			.offset = 0x1c8, .size = 32, .activate = 23 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_PRECOMP_FLT_SWITCH] = { | 
 | 			.offset = 0x7c, .size = 32, .activate = 27 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_PRECOMP_FLT_PARAMS] = { | 
 | 			.offset = 0x200, .size = 32, .activate = 27 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_PEQ_FLT_SWITCH] = { | 
 | 			.offset = 0x84, .size = 32, .activate = 27 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_PEQ_FLT_PARAMS] = { | 
 | 			.offset = 0x250, .size = 32, .activate = 27 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_INPUT_MUTE_SWITCH] = { | 
 | 			.offset = 0x1be, .size = 8, .activate = 17, .pbuf = 1 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_BLUETOOTH_VOLUME] = { | 
 | 			.offset = 0xbf, .size = 8, .activate = 28 }, | 
 | 	} | 
 | }; | 
 |  | 
 | /* Solo Gen 4 */ | 
 | static const struct scarlett2_config_set scarlett2_config_set_gen4_solo = { | 
 | 	.notifications = scarlett4_solo_notifications, | 
 | 	.param_buf_addr = 0xd8, | 
 | 	.items = { | 
 | 		[SCARLETT2_CONFIG_MSD_SWITCH] = { | 
 | 			.offset = 0x47, .size = 8, .activate = 4 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_DIRECT_MONITOR] = { | 
 | 			.offset = 0x108, .size = 8, .activate = 12, .pbuf = 1 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_PHANTOM_SWITCH] = { | 
 | 			.offset = 0x46, .size = 8, .activate = 9, .pbuf = 1, | 
 | 			.mute = 1 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_LEVEL_SWITCH] = { | 
 | 			.offset = 0x3d, .size = 8, .activate = 10, .pbuf = 1, | 
 | 			.mute = 1 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_AIR_SWITCH] = { | 
 | 			.offset = 0x3e, .size = 8, .activate = 11, .pbuf = 1 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_PCM_INPUT_SWITCH] = { | 
 | 			.offset = 0x206, .size = 8, .activate = 25, .pbuf = 1 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_DIRECT_MONITOR_GAIN] = { | 
 | 			.offset = 0x232, .size = 16, .activate = 26 } | 
 | 	} | 
 | }; | 
 |  | 
 | /* 2i2 Gen 4 */ | 
 | static const struct scarlett2_config_set scarlett2_config_set_gen4_2i2 = { | 
 | 	.notifications = scarlett4_2i2_notifications, | 
 | 	.param_buf_addr = 0xfc, | 
 | 	.input_gain_tlv = db_scale_gen4_gain, | 
 | 	.autogain_status_texts = scarlett2_autogain_status_gen4, | 
 | 	.items = { | 
 | 		[SCARLETT2_CONFIG_MSD_SWITCH] = { | 
 | 			.offset = 0x49, .size = 8, .activate = 4 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_DIRECT_MONITOR] = { | 
 | 			.offset = 0x14a, .size = 8, .activate = 16, .pbuf = 1 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_AUTOGAIN_SWITCH] = { | 
 | 			.offset = 0x135, .size = 8, .activate = 10, .pbuf = 1 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_AUTOGAIN_STATUS] = { | 
 | 			.offset = 0x137, .size = 8 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_AG_MEAN_TARGET] = { | 
 | 			.offset = 0x131, .size = 8, .activate = 29, .pbuf = 1 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_AG_PEAK_TARGET] = { | 
 | 			.offset = 0x132, .size = 8, .activate = 30, .pbuf = 1 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_PHANTOM_SWITCH] = { | 
 | 			.offset = 0x48, .size = 8, .activate = 11, .pbuf = 1, | 
 | 			.mute = 1 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_INPUT_GAIN] = { | 
 | 			.offset = 0x4b, .size = 8, .activate = 12, .pbuf = 1 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_LEVEL_SWITCH] = { | 
 | 			.offset = 0x3c, .size = 8, .activate = 13, .pbuf = 1, | 
 | 			.mute = 1 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_SAFE_SWITCH] = { | 
 | 			.offset = 0x147, .size = 8, .activate = 14, .pbuf = 1 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_AIR_SWITCH] = { | 
 | 			.offset = 0x3e, .size = 8, .activate = 15, .pbuf = 1 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_INPUT_SELECT_SWITCH] = { | 
 | 			.offset = 0x14b, .size = 8, .activate = 17, .pbuf = 1 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_INPUT_LINK_SWITCH] = { | 
 | 			.offset = 0x14e, .size = 8, .activate = 18, .pbuf = 1 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_DIRECT_MONITOR_GAIN] = { | 
 | 			.offset = 0x2a0, .size = 16, .activate = 36 } | 
 | 	} | 
 | }; | 
 |  | 
 | /* 4i4 Gen 4 */ | 
 | static const struct scarlett2_config_set scarlett2_config_set_gen4_4i4 = { | 
 | 	.notifications = scarlett4_4i4_notifications, | 
 | 	.param_buf_addr = 0x130, | 
 | 	.input_gain_tlv = db_scale_gen4_gain, | 
 | 	.autogain_status_texts = scarlett2_autogain_status_gen4, | 
 | 	.items = { | 
 | 		[SCARLETT2_CONFIG_MSD_SWITCH] = { | 
 | 			.offset = 0x5c, .size = 8, .activate = 4 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_AUTOGAIN_SWITCH] = { | 
 | 			.offset = 0x13e, .size = 8, .activate = 10, .pbuf = 1 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_AUTOGAIN_STATUS] = { | 
 | 			.offset = 0x140, .size = 8 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_AG_MEAN_TARGET] = { | 
 | 			.offset = 0x13a, .size = 8, .activate = 23, .pbuf = 1 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_AG_PEAK_TARGET] = { | 
 | 			.offset = 0x13b, .size = 8, .activate = 24, .pbuf = 1 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_PHANTOM_SWITCH] = { | 
 | 			.offset = 0x5a, .size = 8, .activate = 11, .pbuf = 1, | 
 | 			.mute = 1 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_INPUT_GAIN] = { | 
 | 			.offset = 0x5e, .size = 8, .activate = 12, .pbuf = 1 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_LEVEL_SWITCH] = { | 
 | 			.offset = 0x4e, .size = 8, .activate = 13, .pbuf = 1, | 
 | 			.mute = 1 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_SAFE_SWITCH] = { | 
 | 			.offset = 0x150, .size = 8, .activate = 14, .pbuf = 1 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_AIR_SWITCH] = { | 
 | 			.offset = 0x50, .size = 8, .activate = 15, .pbuf = 1 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_INPUT_SELECT_SWITCH] = { | 
 | 			.offset = 0x153, .size = 8, .activate = 16, .pbuf = 1 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_INPUT_LINK_SWITCH] = { | 
 | 			.offset = 0x156, .size = 8, .activate = 17, .pbuf = 1 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_MASTER_VOLUME] = { | 
 | 			.offset = 0x32, .size = 16 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_HEADPHONE_VOLUME] = { | 
 | 			.offset = 0x3a, .size = 16 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_POWER_EXT] = { | 
 | 			.offset = 0x168, .size = 8 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_POWER_LOW] = { | 
 | 			.offset = 0x16d, .size = 8 } | 
 | 	} | 
 | }; | 
 |  | 
 | /* Clarett USB and Clarett+ devices: 2Pre, 4Pre, 8Pre */ | 
 | static const struct scarlett2_config_set scarlett2_config_set_clarett = { | 
 | 	.notifications = scarlett2_notifications, | 
 | 	.items = { | 
 | 		[SCARLETT2_CONFIG_DIM_MUTE] = { | 
 | 			.offset = 0x31, .size = 8, .activate = 2 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_LINE_OUT_VOLUME] = { | 
 | 			.offset = 0x34, .size = 16, .activate = 1 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_MUTE_SWITCH] = { | 
 | 			.offset = 0x5c, .size = 8, .activate = 1 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_SW_HW_SWITCH] = { | 
 | 			.offset = 0x66, .size = 8, .activate = 3 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_MASTER_VOLUME] = { | 
 | 			.offset = 0x76, .size = 16 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_LEVEL_SWITCH] = { | 
 | 			.offset = 0x7c, .size = 8, .activate = 7 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_AIR_SWITCH] = { | 
 | 			.offset = 0x95, .size = 8, .activate = 8 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_STANDALONE_SWITCH] = { | 
 | 			.offset = 0x8d, .size = 8, .activate = 6 }, | 
 |  | 
 | 		[SCARLETT2_CONFIG_SPDIF_MODE] = { | 
 | 			.offset = 0x9e, .size = 8, .activate = 4 }, | 
 | 	} | 
 | }; | 
 |  | 
 | /* Description of each hardware port type: | 
 |  * - id: hardware ID of this port type | 
 |  * - src_descr: printf format string for mux input selections | 
 |  * - src_num_offset: added to channel number for the fprintf | 
 |  * - dst_descr: printf format string for mixer controls | 
 |  */ | 
 | struct scarlett2_port { | 
 | 	u16 id; | 
 | 	const char * const src_descr; | 
 | 	int src_num_offset; | 
 | 	const char * const dst_descr; | 
 | 	const char * const dsp_src_descr; | 
 | 	const char * const dsp_dst_descr; | 
 | }; | 
 |  | 
 | static const struct scarlett2_port scarlett2_ports[SCARLETT2_PORT_TYPE_COUNT] = { | 
 | 	[SCARLETT2_PORT_TYPE_NONE] = { | 
 | 		.id = 0x000, | 
 | 		.src_descr = "Off" | 
 | 	}, | 
 | 	[SCARLETT2_PORT_TYPE_ANALOGUE] = { | 
 | 		.id = 0x080, | 
 | 		.src_descr = "Analogue %d", | 
 | 		.src_num_offset = 1, | 
 | 		.dst_descr = "Analogue Output %02d Playback" | 
 | 	}, | 
 | 	[SCARLETT2_PORT_TYPE_SPDIF] = { | 
 | 		.id = 0x180, | 
 | 		.src_descr = "S/PDIF %d", | 
 | 		.src_num_offset = 1, | 
 | 		.dst_descr = "S/PDIF Output %d Playback" | 
 | 	}, | 
 | 	[SCARLETT2_PORT_TYPE_ADAT] = { | 
 | 		.id = 0x200, | 
 | 		.src_descr = "ADAT %d", | 
 | 		.src_num_offset = 1, | 
 | 		.dst_descr = "ADAT Output %d Playback" | 
 | 	}, | 
 | 	[SCARLETT2_PORT_TYPE_MIX] = { | 
 | 		.id = 0x300, | 
 | 		.src_descr = "Mix %c", | 
 | 		.src_num_offset = 'A', | 
 | 		.dst_descr = "Mixer Input %02d Capture", | 
 | 		.dsp_src_descr = "DSP %d", | 
 | 		.dsp_dst_descr = "DSP Input %d Capture" | 
 | 	}, | 
 | 	[SCARLETT2_PORT_TYPE_PCM] = { | 
 | 		.id = 0x600, | 
 | 		.src_descr = "PCM %d", | 
 | 		.src_num_offset = 1, | 
 | 		.dst_descr = "PCM %02d Capture" | 
 | 	}, | 
 | }; | 
 |  | 
 | /* Number of mux tables: one for each band of sample rates | 
 |  * (44.1/48kHz, 88.2/96kHz, and 176.4/176kHz) | 
 |  */ | 
 | #define SCARLETT2_MUX_TABLES 3 | 
 |  | 
 | /* Maximum number of entries in a mux table */ | 
 | #define SCARLETT2_MAX_MUX_ENTRIES 10 | 
 |  | 
 | /* One entry within mux_assignment defines the port type and range of | 
 |  * ports to add to the set_mux message. The end of the list is marked | 
 |  * with count == 0. | 
 |  */ | 
 | struct scarlett2_mux_entry { | 
 | 	u8 port_type; | 
 | 	u8 start; | 
 | 	u8 count; | 
 | }; | 
 |  | 
 | /* Maximum number of entries in a mux table */ | 
 | #define SCARLETT2_MAX_METER_ENTRIES 9 | 
 |  | 
 | /* One entry within meter_assignment defines the range of mux outputs | 
 |  * that consecutive meter entries are mapped to. The end of the list | 
 |  * is marked with count == 0. | 
 |  */ | 
 | struct scarlett2_meter_entry { | 
 | 	u8 start; | 
 | 	u8 count; | 
 | }; | 
 |  | 
 | struct scarlett2_device_info { | 
 | 	/* which set of configuration parameters the device uses */ | 
 | 	const struct scarlett2_config_set *config_set; | 
 |  | 
 | 	/* minimum firmware version required */ | 
 | 	u16 min_firmware_version; | 
 |  | 
 | 	/* has a downloadable device map */ | 
 | 	u8 has_devmap; | 
 |  | 
 | 	/* support for main/alt speaker switching */ | 
 | 	u8 has_speaker_switching; | 
 |  | 
 | 	/* support for talkback microphone */ | 
 | 	u8 has_talkback; | 
 |  | 
 | 	/* the number of analogue inputs with a software switchable | 
 | 	 * level control that can be set to line or instrument | 
 | 	 */ | 
 | 	u8 level_input_count; | 
 |  | 
 | 	/* the first input with a level control (0-based) */ | 
 | 	u8 level_input_first; | 
 |  | 
 | 	/* the number of analogue inputs with a software switchable | 
 | 	 * 10dB pad control | 
 | 	 */ | 
 | 	u8 pad_input_count; | 
 |  | 
 | 	/* the number of analogue inputs with a software switchable | 
 | 	 * "air" control | 
 | 	 */ | 
 | 	u8 air_input_count; | 
 |  | 
 | 	/* the first input with an air control (0-based) */ | 
 | 	u8 air_input_first; | 
 |  | 
 | 	/* number of additional air options | 
 | 	 * 0 for air presence only (Gen 3) | 
 | 	 * 1 for air presence+drive (Gen 4) | 
 | 	 */ | 
 | 	u8 air_option; | 
 |  | 
 | 	/* the number of analogue inputs with DSP control */ | 
 | 	u8 dsp_input_count; | 
 |  | 
 | 	/* number of pre-compressor filters */ | 
 | 	u8 precomp_flt_count; | 
 |  | 
 | 	/* number of parametric EQ filters */ | 
 | 	u8 peq_flt_count; | 
 |  | 
 | 	/* number of PEQ filters plus unused slots */ | 
 | 	u8 peq_flt_total_count; | 
 |  | 
 | 	/* the number of analogue inputs with a software switchable | 
 | 	 * mute control | 
 | 	 */ | 
 | 	u8 mute_input_count; | 
 |  | 
 | 	/* the number of phantom (48V) software switchable controls */ | 
 | 	u8 phantom_count; | 
 |  | 
 | 	/* the first input with phantom power control (0-based) */ | 
 | 	u8 phantom_first; | 
 |  | 
 | 	/* the number of inputs each phantom switch controls */ | 
 | 	u8 inputs_per_phantom; | 
 |  | 
 | 	/* the number of inputs with software-controllable gain */ | 
 | 	u8 gain_input_count; | 
 |  | 
 | 	/* the number of inputs with safe mode */ | 
 | 	u8 safe_input_count; | 
 |  | 
 | 	/* the number of direct monitor options | 
 | 	 * (0 = none, 1 = mono only, 2 = mono/stereo) | 
 | 	 */ | 
 | 	u8 direct_monitor; | 
 |  | 
 | 	/* the number of DSP channels */ | 
 | 	u8 dsp_count; | 
 |  | 
 | 	/* has a Bluetooth module with volume control */ | 
 | 	u8 has_bluetooth; | 
 |  | 
 | 	/* S/PDIF Source/Digital I/O mode control */ | 
 | 	const char * const spdif_mode_control_name; | 
 | 	const u8 *spdif_mode_values; | 
 | 	const char * const *spdif_mode_texts; | 
 |  | 
 | 	/* remap analogue outputs; 18i8 Gen 3 has "line 3/4" connected | 
 | 	 * internally to the analogue 7/8 outputs | 
 | 	 */ | 
 | 	u8 line_out_remap_enable; | 
 | 	u8 line_out_remap[SCARLETT2_ANALOGUE_MAX]; | 
 | 	u8 line_out_unmap[SCARLETT2_ANALOGUE_MAX]; | 
 |  | 
 | 	/* additional description for the line out volume controls */ | 
 | 	const char * const line_out_descrs[SCARLETT2_ANALOGUE_MAX]; | 
 |  | 
 | 	/* number of sources/destinations of each port type */ | 
 | 	const int port_count[SCARLETT2_PORT_TYPE_COUNT][SCARLETT2_PORT_DIRNS]; | 
 |  | 
 | 	/* layout/order of the entries in the set_mux message */ | 
 | 	struct scarlett2_mux_entry mux_assignment[SCARLETT2_MUX_TABLES] | 
 | 						 [SCARLETT2_MAX_MUX_ENTRIES]; | 
 |  | 
 | 	/* map from meter level order returned by | 
 | 	 * SCARLETT2_USB_GET_METER to index into mux[] entries (same | 
 | 	 * as the order returned by scarlett2_meter_ctl_get()) | 
 | 	 */ | 
 | 	struct scarlett2_meter_entry meter_map[SCARLETT2_MAX_METER_ENTRIES]; | 
 | }; | 
 |  | 
 | struct scarlett2_data { | 
 | 	struct usb_mixer_interface *mixer; | 
 | 	struct mutex usb_mutex; /* prevent sending concurrent USB requests */ | 
 | 	struct completion cmd_done; | 
 | 	struct mutex data_mutex; /* lock access to this data */ | 
 | 	u8 running; | 
 | 	u8 hwdep_in_use; | 
 | 	u8 selected_flash_segment_id; | 
 | 	u8 flash_write_state; | 
 | 	struct delayed_work work; | 
 | 	const struct scarlett2_device_info *info; | 
 | 	const struct scarlett2_config_set *config_set; | 
 | 	const char *series_name; | 
 | 	__u8 bInterfaceNumber; | 
 | 	__u8 bEndpointAddress; | 
 | 	__u16 wMaxPacketSize; | 
 | 	__u8 bInterval; | 
 | 	u8 num_mux_srcs; | 
 | 	u8 num_mux_dsts; | 
 | 	u8 num_mix_in; | 
 | 	u8 num_mix_out; | 
 | 	u8 num_line_out; | 
 | 	u8 num_monitor_mix_ctls; | 
 | 	u8 num_autogain_status_texts; | 
 | 	u32 firmware_version; | 
 | 	u8 flash_segment_nums[SCARLETT2_SEGMENT_ID_COUNT]; | 
 | 	u8 flash_segment_blocks[SCARLETT2_SEGMENT_ID_COUNT]; | 
 | 	u16 scarlett2_seq; | 
 | 	u8 sync_updated; | 
 | 	u8 vol_updated; | 
 | 	u8 dim_mute_updated; | 
 | 	u8 input_level_updated; | 
 | 	u8 input_pad_updated; | 
 | 	u8 input_air_updated; | 
 | 	u8 input_dsp_updated; | 
 | 	u8 input_mute_updated; | 
 | 	u8 input_phantom_updated; | 
 | 	u8 input_select_updated; | 
 | 	u8 input_gain_updated; | 
 | 	u8 autogain_updated; | 
 | 	u8 input_safe_updated; | 
 | 	u8 pcm_input_switch_updated; | 
 | 	u8 monitor_other_updated; | 
 | 	u8 direct_monitor_updated; | 
 | 	u8 mux_updated; | 
 | 	u8 mix_updated; | 
 | 	u8 speaker_switching_switched; | 
 | 	u8 power_status_updated; | 
 | 	u8 bluetooth_updated; | 
 | 	u8 sync; | 
 | 	u8 master_vol; | 
 | 	u8 headphone_vol; | 
 | 	u8 vol[SCARLETT2_ANALOGUE_MAX]; | 
 | 	u8 vol_sw_hw_switch[SCARLETT2_ANALOGUE_MAX]; | 
 | 	u8 mute_switch[SCARLETT2_ANALOGUE_MAX]; | 
 | 	u8 level_switch[SCARLETT2_LEVEL_SWITCH_MAX]; | 
 | 	u8 pad_switch[SCARLETT2_PAD_SWITCH_MAX]; | 
 | 	u8 dim_mute[SCARLETT2_DIM_MUTE_COUNT]; | 
 | 	u8 air_switch[SCARLETT2_AIR_SWITCH_MAX]; | 
 | 	u8 dsp_switch[SCARLETT2_DSP_SWITCH_MAX]; | 
 | 	s32 compressor_values[SCARLETT2_COMPRESSOR_CTLS_MAX]; | 
 | 	s32 precomp_flt_values[SCARLETT2_PRECOMP_FLT_VALUES_MAX]; | 
 | 	s32 peq_flt_values[SCARLETT2_PEQ_FLT_VALUES_MAX]; | 
 | 	u8 precomp_flt_switch[SCARLETT2_DSP_SWITCH_MAX]; | 
 | 	u8 peq_flt_switch[SCARLETT2_DSP_SWITCH_MAX]; | 
 | 	u8 input_mute_switch[SCARLETT2_INPUT_MUTE_SWITCH_MAX]; | 
 | 	u8 phantom_switch[SCARLETT2_PHANTOM_SWITCH_MAX]; | 
 | 	u8 phantom_persistence; | 
 | 	u8 input_select_switch; | 
 | 	u8 input_link_switch[SCARLETT2_INPUT_GAIN_MAX]; | 
 | 	u8 gain[SCARLETT2_INPUT_GAIN_MAX]; | 
 | 	u8 autogain_switch[SCARLETT2_INPUT_GAIN_MAX]; | 
 | 	u8 autogain_status[SCARLETT2_INPUT_GAIN_MAX]; | 
 | 	s8 ag_targets[SCARLETT2_AG_TARGET_COUNT]; | 
 | 	u8 safe_switch[SCARLETT2_INPUT_GAIN_MAX]; | 
 | 	u8 pcm_input_switch; | 
 | 	u8 direct_monitor_switch; | 
 | 	u8 speaker_switching_switch; | 
 | 	u8 talkback_switch; | 
 | 	u8 talkback_map[SCARLETT2_OUTPUT_MIX_MAX]; | 
 | 	u8 msd_switch; | 
 | 	u8 standalone_switch; | 
 | 	u8 power_status; | 
 | 	u8 bluetooth_volume; | 
 | 	u8 spdif_mode; | 
 | 	u8 meter_level_map[SCARLETT2_MAX_METERS]; | 
 | 	struct snd_kcontrol *sync_ctl; | 
 | 	struct snd_kcontrol *master_vol_ctl; | 
 | 	struct snd_kcontrol *headphone_vol_ctl; | 
 | 	struct snd_kcontrol *vol_ctls[SCARLETT2_ANALOGUE_MAX]; | 
 | 	struct snd_kcontrol *sw_hw_ctls[SCARLETT2_ANALOGUE_MAX]; | 
 | 	struct snd_kcontrol *mute_ctls[SCARLETT2_ANALOGUE_MAX]; | 
 | 	struct snd_kcontrol *dim_mute_ctls[SCARLETT2_DIM_MUTE_COUNT]; | 
 | 	struct snd_kcontrol *level_ctls[SCARLETT2_LEVEL_SWITCH_MAX]; | 
 | 	struct snd_kcontrol *pad_ctls[SCARLETT2_PAD_SWITCH_MAX]; | 
 | 	struct snd_kcontrol *air_ctls[SCARLETT2_AIR_SWITCH_MAX]; | 
 | 	struct snd_kcontrol *dsp_ctls[SCARLETT2_DSP_SWITCH_MAX]; | 
 | 	struct snd_kcontrol *input_mute_ctls[SCARLETT2_INPUT_MUTE_SWITCH_MAX]; | 
 | 	struct snd_kcontrol *phantom_ctls[SCARLETT2_PHANTOM_SWITCH_MAX]; | 
 | 	struct snd_kcontrol *input_select_ctl; | 
 | 	struct snd_kcontrol *input_link_ctls[SCARLETT2_INPUT_GAIN_MAX]; | 
 | 	struct snd_kcontrol *input_gain_ctls[SCARLETT2_INPUT_GAIN_MAX]; | 
 | 	struct snd_kcontrol *autogain_ctls[SCARLETT2_INPUT_GAIN_MAX]; | 
 | 	struct snd_kcontrol *autogain_status_ctls[SCARLETT2_INPUT_GAIN_MAX]; | 
 | 	struct snd_kcontrol *ag_target_ctls[SCARLETT2_AG_TARGET_COUNT]; | 
 | 	struct snd_kcontrol *safe_ctls[SCARLETT2_INPUT_GAIN_MAX]; | 
 | 	struct snd_kcontrol *pcm_input_switch_ctl; | 
 | 	struct snd_kcontrol *mux_ctls[SCARLETT2_MUX_MAX]; | 
 | 	struct snd_kcontrol *mix_ctls[SCARLETT2_MIX_MAX]; | 
 | 	struct snd_kcontrol *compressor_ctls[SCARLETT2_COMPRESSOR_CTLS_MAX]; | 
 | 	struct snd_kcontrol *precomp_flt_ctls[SCARLETT2_PRECOMP_FLT_CTLS_MAX]; | 
 | 	struct snd_kcontrol *peq_flt_ctls[SCARLETT2_PEQ_FLT_CTLS_MAX]; | 
 | 	struct snd_kcontrol *precomp_flt_switch_ctls[SCARLETT2_DSP_SWITCH_MAX]; | 
 | 	struct snd_kcontrol *peq_flt_switch_ctls[SCARLETT2_DSP_SWITCH_MAX]; | 
 | 	struct snd_kcontrol *direct_monitor_ctl; | 
 | 	struct snd_kcontrol *speaker_switching_ctl; | 
 | 	struct snd_kcontrol *talkback_ctl; | 
 | 	struct snd_kcontrol *power_status_ctl; | 
 | 	struct snd_kcontrol *bluetooth_volume_ctl; | 
 | 	u8 mux[SCARLETT2_MUX_MAX]; | 
 | 	u8 mix[SCARLETT2_MIX_MAX]; | 
 | 	u8 monitor_mix[SCARLETT2_MONITOR_MIX_MAX]; | 
 | }; | 
 |  | 
 | /*** Model-specific data ***/ | 
 |  | 
 | static const struct scarlett2_device_info s6i6_gen2_info = { | 
 | 	.config_set = &scarlett2_config_set_gen2a, | 
 | 	.level_input_count = 2, | 
 | 	.pad_input_count = 2, | 
 |  | 
 | 	.line_out_descrs = { | 
 | 		"Headphones 1 L", | 
 | 		"Headphones 1 R", | 
 | 		"Headphones 2 L", | 
 | 		"Headphones 2 R", | 
 | 	}, | 
 |  | 
 | 	.port_count = { | 
 | 		[SCARLETT2_PORT_TYPE_NONE]     = {  1,  0 }, | 
 | 		[SCARLETT2_PORT_TYPE_ANALOGUE] = {  4,  4 }, | 
 | 		[SCARLETT2_PORT_TYPE_SPDIF]    = {  2,  2 }, | 
 | 		[SCARLETT2_PORT_TYPE_MIX]      = { 10, 18 }, | 
 | 		[SCARLETT2_PORT_TYPE_PCM]      = {  6,  6 }, | 
 | 	}, | 
 |  | 
 | 	.mux_assignment = { { | 
 | 		{ SCARLETT2_PORT_TYPE_PCM,      0,  6 }, | 
 | 		{ SCARLETT2_PORT_TYPE_ANALOGUE, 0,  4 }, | 
 | 		{ SCARLETT2_PORT_TYPE_SPDIF,    0,  2 }, | 
 | 		{ SCARLETT2_PORT_TYPE_MIX,      0, 18 }, | 
 | 		{ SCARLETT2_PORT_TYPE_NONE,     0,  8 }, | 
 | 		{ 0,                            0,  0 }, | 
 | 	}, { | 
 | 		{ SCARLETT2_PORT_TYPE_PCM,      0,  6 }, | 
 | 		{ SCARLETT2_PORT_TYPE_ANALOGUE, 0,  4 }, | 
 | 		{ SCARLETT2_PORT_TYPE_SPDIF,    0,  2 }, | 
 | 		{ SCARLETT2_PORT_TYPE_MIX,      0, 18 }, | 
 | 		{ SCARLETT2_PORT_TYPE_NONE,     0,  8 }, | 
 | 		{ 0,                            0,  0 }, | 
 | 	}, { | 
 | 		{ SCARLETT2_PORT_TYPE_PCM,      0,  6 }, | 
 | 		{ SCARLETT2_PORT_TYPE_ANALOGUE, 0,  4 }, | 
 | 		{ SCARLETT2_PORT_TYPE_SPDIF,    0,  2 }, | 
 | 		{ SCARLETT2_PORT_TYPE_MIX,      0, 18 }, | 
 | 		{ SCARLETT2_PORT_TYPE_NONE,     0,  8 }, | 
 | 		{ 0,                            0,  0 }, | 
 | 	} }, | 
 |  | 
 | 	.meter_map = { | 
 | 		{ 24,  6 }, | 
 | 		{  0, 24 }, | 
 | 		{  0,  0 }, | 
 | 	} | 
 | }; | 
 |  | 
 | static const struct scarlett2_device_info s18i8_gen2_info = { | 
 | 	.config_set = &scarlett2_config_set_gen2a, | 
 | 	.level_input_count = 2, | 
 | 	.pad_input_count = 4, | 
 |  | 
 | 	.line_out_descrs = { | 
 | 		"Monitor L", | 
 | 		"Monitor R", | 
 | 		"Headphones 1 L", | 
 | 		"Headphones 1 R", | 
 | 		"Headphones 2 L", | 
 | 		"Headphones 2 R", | 
 | 	}, | 
 |  | 
 | 	.port_count = { | 
 | 		[SCARLETT2_PORT_TYPE_NONE]     = {  1,  0 }, | 
 | 		[SCARLETT2_PORT_TYPE_ANALOGUE] = {  8,  6 }, | 
 | 		[SCARLETT2_PORT_TYPE_SPDIF]    = {  2,  2 }, | 
 | 		[SCARLETT2_PORT_TYPE_ADAT]     = {  8,  0 }, | 
 | 		[SCARLETT2_PORT_TYPE_MIX]      = { 10, 18 }, | 
 | 		[SCARLETT2_PORT_TYPE_PCM]      = {  8, 18 }, | 
 | 	}, | 
 |  | 
 | 	.mux_assignment = { { | 
 | 		{ SCARLETT2_PORT_TYPE_PCM,      0, 18 }, | 
 | 		{ SCARLETT2_PORT_TYPE_ANALOGUE, 0,  6 }, | 
 | 		{ SCARLETT2_PORT_TYPE_SPDIF,    0,  2 }, | 
 | 		{ SCARLETT2_PORT_TYPE_MIX,      0, 18 }, | 
 | 		{ SCARLETT2_PORT_TYPE_NONE,     0,  8 }, | 
 | 		{ 0,                            0,  0 }, | 
 | 	}, { | 
 | 		{ SCARLETT2_PORT_TYPE_PCM,      0, 14 }, | 
 | 		{ SCARLETT2_PORT_TYPE_ANALOGUE, 0,  6 }, | 
 | 		{ SCARLETT2_PORT_TYPE_SPDIF,    0,  2 }, | 
 | 		{ SCARLETT2_PORT_TYPE_MIX,      0, 18 }, | 
 | 		{ SCARLETT2_PORT_TYPE_NONE,     0,  8 }, | 
 | 		{ 0,                            0,  0 }, | 
 | 	}, { | 
 | 		{ SCARLETT2_PORT_TYPE_PCM,      0, 10 }, | 
 | 		{ SCARLETT2_PORT_TYPE_ANALOGUE, 0,  6 }, | 
 | 		{ SCARLETT2_PORT_TYPE_SPDIF,    0,  2 }, | 
 | 		{ SCARLETT2_PORT_TYPE_MIX,      0, 18 }, | 
 | 		{ SCARLETT2_PORT_TYPE_NONE,     0,  4 }, | 
 | 		{ 0,                            0,  0 }, | 
 | 	} }, | 
 |  | 
 | 	.meter_map = { | 
 | 		{ 26, 18 }, | 
 | 		{  0, 26 }, | 
 | 		{  0,  0 }, | 
 | 	} | 
 | }; | 
 |  | 
 | static const struct scarlett2_device_info s18i20_gen2_info = { | 
 | 	.config_set = &scarlett2_config_set_gen2b, | 
 |  | 
 | 	.line_out_descrs = { | 
 | 		"Monitor L", | 
 | 		"Monitor R", | 
 | 		NULL, | 
 | 		NULL, | 
 | 		NULL, | 
 | 		NULL, | 
 | 		"Headphones 1 L", | 
 | 		"Headphones 1 R", | 
 | 		"Headphones 2 L", | 
 | 		"Headphones 2 R", | 
 | 	}, | 
 |  | 
 | 	.port_count = { | 
 | 		[SCARLETT2_PORT_TYPE_NONE]     = {  1,  0 }, | 
 | 		[SCARLETT2_PORT_TYPE_ANALOGUE] = {  8, 10 }, | 
 | 		[SCARLETT2_PORT_TYPE_SPDIF]    = {  2,  2 }, | 
 | 		[SCARLETT2_PORT_TYPE_ADAT]     = {  8,  8 }, | 
 | 		[SCARLETT2_PORT_TYPE_MIX]      = { 10, 18 }, | 
 | 		[SCARLETT2_PORT_TYPE_PCM]      = { 20, 18 }, | 
 | 	}, | 
 |  | 
 | 	.mux_assignment = { { | 
 | 		{ SCARLETT2_PORT_TYPE_PCM,      0, 18 }, | 
 | 		{ SCARLETT2_PORT_TYPE_ANALOGUE, 0, 10 }, | 
 | 		{ SCARLETT2_PORT_TYPE_SPDIF,    0,  2 }, | 
 | 		{ SCARLETT2_PORT_TYPE_ADAT,     0,  8 }, | 
 | 		{ SCARLETT2_PORT_TYPE_MIX,      0, 18 }, | 
 | 		{ SCARLETT2_PORT_TYPE_NONE,     0,  8 }, | 
 | 		{ 0,                            0,  0 }, | 
 | 	}, { | 
 | 		{ SCARLETT2_PORT_TYPE_PCM,      0, 14 }, | 
 | 		{ SCARLETT2_PORT_TYPE_ANALOGUE, 0, 10 }, | 
 | 		{ SCARLETT2_PORT_TYPE_SPDIF,    0,  2 }, | 
 | 		{ SCARLETT2_PORT_TYPE_ADAT,     0,  4 }, | 
 | 		{ SCARLETT2_PORT_TYPE_MIX,      0, 18 }, | 
 | 		{ SCARLETT2_PORT_TYPE_NONE,     0,  8 }, | 
 | 		{ 0,                            0,  0 }, | 
 | 	}, { | 
 | 		{ SCARLETT2_PORT_TYPE_PCM,      0, 10 }, | 
 | 		{ SCARLETT2_PORT_TYPE_ANALOGUE, 0, 10 }, | 
 | 		{ SCARLETT2_PORT_TYPE_SPDIF,    0,  2 }, | 
 | 		{ SCARLETT2_PORT_TYPE_MIX,      0, 18 }, | 
 | 		{ SCARLETT2_PORT_TYPE_NONE,     0,  6 }, | 
 | 		{ 0,                            0,  0 }, | 
 | 	} }, | 
 |  | 
 | 	.meter_map = { | 
 | 		{ 38, 18 }, | 
 | 		{  0, 38 }, | 
 | 		{  0,  0 }, | 
 | 	} | 
 | }; | 
 |  | 
 | static const struct scarlett2_device_info solo_gen3_info = { | 
 | 	.config_set = &scarlett2_config_set_gen3a, | 
 | 	.level_input_count = 1, | 
 | 	.level_input_first = 1, | 
 | 	.air_input_count = 1, | 
 | 	.phantom_count = 1, | 
 | 	.inputs_per_phantom = 1, | 
 | 	.direct_monitor = 1, | 
 | }; | 
 |  | 
 | static const struct scarlett2_device_info s2i2_gen3_info = { | 
 | 	.config_set = &scarlett2_config_set_gen3a, | 
 | 	.level_input_count = 2, | 
 | 	.air_input_count = 2, | 
 | 	.phantom_count = 1, | 
 | 	.inputs_per_phantom = 2, | 
 | 	.direct_monitor = 2, | 
 | }; | 
 |  | 
 | static const struct scarlett2_device_info s4i4_gen3_info = { | 
 | 	.config_set = &scarlett2_config_set_gen3b, | 
 | 	.level_input_count = 2, | 
 | 	.pad_input_count = 2, | 
 | 	.air_input_count = 2, | 
 | 	.phantom_count = 1, | 
 | 	.inputs_per_phantom = 2, | 
 |  | 
 | 	.line_out_descrs = { | 
 | 		"Monitor L", | 
 | 		"Monitor R", | 
 | 		"Headphones L", | 
 | 		"Headphones R", | 
 | 	}, | 
 |  | 
 | 	.port_count = { | 
 | 		[SCARLETT2_PORT_TYPE_NONE]     = { 1, 0 }, | 
 | 		[SCARLETT2_PORT_TYPE_ANALOGUE] = { 4, 4 }, | 
 | 		[SCARLETT2_PORT_TYPE_MIX]      = { 6, 8 }, | 
 | 		[SCARLETT2_PORT_TYPE_PCM]      = { 4, 6 }, | 
 | 	}, | 
 |  | 
 | 	.mux_assignment = { { | 
 | 		{ SCARLETT2_PORT_TYPE_PCM,      0,  6 }, | 
 | 		{ SCARLETT2_PORT_TYPE_ANALOGUE, 0,  4 }, | 
 | 		{ SCARLETT2_PORT_TYPE_MIX,      0,  8 }, | 
 | 		{ SCARLETT2_PORT_TYPE_NONE,     0, 16 }, | 
 | 		{ 0,                            0,  0 }, | 
 | 	}, { | 
 | 		{ SCARLETT2_PORT_TYPE_PCM,      0,  6 }, | 
 | 		{ SCARLETT2_PORT_TYPE_ANALOGUE, 0,  4 }, | 
 | 		{ SCARLETT2_PORT_TYPE_MIX,      0,  8 }, | 
 | 		{ SCARLETT2_PORT_TYPE_NONE,     0, 16 }, | 
 | 		{ 0,                            0,  0 }, | 
 | 	}, { | 
 | 		{ SCARLETT2_PORT_TYPE_PCM,      0,  6 }, | 
 | 		{ SCARLETT2_PORT_TYPE_ANALOGUE, 0,  4 }, | 
 | 		{ SCARLETT2_PORT_TYPE_MIX,      0,  8 }, | 
 | 		{ SCARLETT2_PORT_TYPE_NONE,     0, 16 }, | 
 | 		{ 0,                            0,  0 }, | 
 | 	} }, | 
 |  | 
 | 	.meter_map = { | 
 | 		{ 12,  6 }, | 
 | 		{  0, 12 }, | 
 | 		{  0,  0 }, | 
 | 	} | 
 | }; | 
 |  | 
 | static const struct scarlett2_device_info s8i6_gen3_info = { | 
 | 	.config_set = &scarlett2_config_set_gen3b, | 
 | 	.level_input_count = 2, | 
 | 	.pad_input_count = 2, | 
 | 	.air_input_count = 2, | 
 | 	.phantom_count = 1, | 
 | 	.inputs_per_phantom = 2, | 
 |  | 
 | 	.line_out_descrs = { | 
 | 		"Headphones 1 L", | 
 | 		"Headphones 1 R", | 
 | 		"Headphones 2 L", | 
 | 		"Headphones 2 R", | 
 | 	}, | 
 |  | 
 | 	.port_count = { | 
 | 		[SCARLETT2_PORT_TYPE_NONE]     = { 1,  0 }, | 
 | 		[SCARLETT2_PORT_TYPE_ANALOGUE] = { 6,  4 }, | 
 | 		[SCARLETT2_PORT_TYPE_SPDIF]    = { 2,  2 }, | 
 | 		[SCARLETT2_PORT_TYPE_MIX]      = { 8,  8 }, | 
 | 		[SCARLETT2_PORT_TYPE_PCM]      = { 6, 10 }, | 
 | 	}, | 
 |  | 
 | 	.mux_assignment = { { | 
 | 		{ SCARLETT2_PORT_TYPE_PCM,      0,  8 }, | 
 | 		{ SCARLETT2_PORT_TYPE_ANALOGUE, 0,  4 }, | 
 | 		{ SCARLETT2_PORT_TYPE_SPDIF,    0,  2 }, | 
 | 		{ SCARLETT2_PORT_TYPE_PCM,      8,  2 }, | 
 | 		{ SCARLETT2_PORT_TYPE_MIX,      0,  8 }, | 
 | 		{ SCARLETT2_PORT_TYPE_NONE,     0, 18 }, | 
 | 		{ 0,                            0,  0 }, | 
 | 	}, { | 
 | 		{ SCARLETT2_PORT_TYPE_PCM,      0,  8 }, | 
 | 		{ SCARLETT2_PORT_TYPE_ANALOGUE, 0,  4 }, | 
 | 		{ SCARLETT2_PORT_TYPE_SPDIF,    0,  2 }, | 
 | 		{ SCARLETT2_PORT_TYPE_PCM,      8,  2 }, | 
 | 		{ SCARLETT2_PORT_TYPE_MIX,      0,  8 }, | 
 | 		{ SCARLETT2_PORT_TYPE_NONE,     0, 18 }, | 
 | 		{ 0,                            0,  0 }, | 
 | 	}, { | 
 | 		{ SCARLETT2_PORT_TYPE_PCM,      0,  8 }, | 
 | 		{ SCARLETT2_PORT_TYPE_ANALOGUE, 0,  4 }, | 
 | 		{ SCARLETT2_PORT_TYPE_SPDIF,    0,  2 }, | 
 | 		{ SCARLETT2_PORT_TYPE_PCM,      8,  2 }, | 
 | 		{ SCARLETT2_PORT_TYPE_MIX,      0,  8 }, | 
 | 		{ SCARLETT2_PORT_TYPE_NONE,     0, 18 }, | 
 | 		{ 0,                            0,  0 }, | 
 | 	} }, | 
 |  | 
 | 	.meter_map = { | 
 | 		{ 14, 8 }, | 
 | 		{  0, 6 }, | 
 | 		{ 22, 2 }, | 
 | 		{  6, 8 }, | 
 | 		{  0, 0 }, | 
 | 	} | 
 | }; | 
 |  | 
 | static const u8 scarlett2_spdif_s18i8_gen3_values[] = { 0, 2, 0xff }; | 
 |  | 
 | static const char * const scarlett2_spdif_s18i8_gen3_texts[] = { | 
 | 	"RCA", | 
 | 	"Optical", | 
 | 	NULL | 
 | }; | 
 |  | 
 | static const struct scarlett2_device_info s18i8_gen3_info = { | 
 | 	.config_set = &scarlett2_config_set_gen3c, | 
 | 	.has_speaker_switching = 1, | 
 | 	.level_input_count = 2, | 
 | 	.pad_input_count = 4, | 
 | 	.air_input_count = 4, | 
 | 	.phantom_count = 2, | 
 | 	.inputs_per_phantom = 2, | 
 |  | 
 | 	.spdif_mode_control_name = "S/PDIF Mode Capture Enum", | 
 | 	.spdif_mode_values = scarlett2_spdif_s18i8_gen3_values, | 
 | 	.spdif_mode_texts = scarlett2_spdif_s18i8_gen3_texts, | 
 |  | 
 | 	.line_out_remap_enable = 1, | 
 | 	.line_out_remap = { 0, 1, 6, 7, 2, 3, 4, 5 }, | 
 | 	.line_out_unmap = { 0, 1, 4, 5, 6, 7, 2, 3 }, | 
 |  | 
 | 	.line_out_descrs = { | 
 | 		"Monitor L", | 
 | 		"Monitor R", | 
 | 		"Alt Monitor L", | 
 | 		"Alt Monitor R", | 
 | 		"Headphones 1 L", | 
 | 		"Headphones 1 R", | 
 | 		"Headphones 2 L", | 
 | 		"Headphones 2 R", | 
 | 	}, | 
 |  | 
 | 	.port_count = { | 
 | 		[SCARLETT2_PORT_TYPE_NONE]     = {  1,  0 }, | 
 | 		[SCARLETT2_PORT_TYPE_ANALOGUE] = {  8,  8 }, | 
 | 		[SCARLETT2_PORT_TYPE_SPDIF]    = {  2,  2 }, | 
 | 		[SCARLETT2_PORT_TYPE_ADAT]     = {  8,  0 }, | 
 | 		[SCARLETT2_PORT_TYPE_MIX]      = { 10, 20 }, | 
 | 		[SCARLETT2_PORT_TYPE_PCM]      = {  8, 20 }, | 
 | 	}, | 
 |  | 
 | 	.mux_assignment = { { | 
 | 		{ SCARLETT2_PORT_TYPE_PCM,       0, 10 }, | 
 | 		{ SCARLETT2_PORT_TYPE_PCM,      12,  8 }, | 
 | 		{ SCARLETT2_PORT_TYPE_ANALOGUE,  0,  2 }, | 
 | 		{ SCARLETT2_PORT_TYPE_ANALOGUE,  6,  2 }, | 
 | 		{ SCARLETT2_PORT_TYPE_ANALOGUE,  2,  4 }, | 
 | 		{ SCARLETT2_PORT_TYPE_SPDIF,     0,  2 }, | 
 | 		{ SCARLETT2_PORT_TYPE_PCM,      10,  2 }, | 
 | 		{ SCARLETT2_PORT_TYPE_MIX,       0, 20 }, | 
 | 		{ SCARLETT2_PORT_TYPE_NONE,      0, 10 }, | 
 | 		{ 0,                             0,  0 }, | 
 | 	}, { | 
 | 		{ SCARLETT2_PORT_TYPE_PCM,       0, 10 }, | 
 | 		{ SCARLETT2_PORT_TYPE_PCM,      12,  4 }, | 
 | 		{ SCARLETT2_PORT_TYPE_ANALOGUE,  0,  2 }, | 
 | 		{ SCARLETT2_PORT_TYPE_ANALOGUE,  6,  2 }, | 
 | 		{ SCARLETT2_PORT_TYPE_ANALOGUE,  2,  4 }, | 
 | 		{ SCARLETT2_PORT_TYPE_SPDIF,     0,  2 }, | 
 | 		{ SCARLETT2_PORT_TYPE_PCM,      10,  2 }, | 
 | 		{ SCARLETT2_PORT_TYPE_MIX,       0, 20 }, | 
 | 		{ SCARLETT2_PORT_TYPE_NONE,      0, 10 }, | 
 | 		{ 0,                             0,  0 }, | 
 | 	}, { | 
 | 		{ SCARLETT2_PORT_TYPE_PCM,       0, 10 }, | 
 | 		{ SCARLETT2_PORT_TYPE_ANALOGUE,  0,  2 }, | 
 | 		{ SCARLETT2_PORT_TYPE_ANALOGUE,  6,  2 }, | 
 | 		{ SCARLETT2_PORT_TYPE_ANALOGUE,  2,  4 }, | 
 | 		{ SCARLETT2_PORT_TYPE_SPDIF,     0,  2 }, | 
 | 		{ SCARLETT2_PORT_TYPE_MIX,       0, 20 }, | 
 | 		{ SCARLETT2_PORT_TYPE_NONE,      0, 10 }, | 
 | 		{ 0,                             0,  0 }, | 
 | 	} }, | 
 |  | 
 | 	.meter_map = { | 
 | 		{ 30, 10 }, | 
 | 		{ 42,  8 }, | 
 | 		{  0,  2 }, | 
 | 		{  6,  2 }, | 
 | 		{  2,  4 }, | 
 | 		{  8,  2 }, | 
 | 		{ 40,  2 }, | 
 | 		{ 10, 20 }, | 
 | 		{  0,  0 } | 
 | 	} | 
 | }; | 
 |  | 
 | static const u8 scarlett2_spdif_s18i20_gen3_values[] = { 0, 6, 1, 0xff }; | 
 |  | 
 | static const char * const scarlett2_spdif_s18i20_gen3_texts[] = { | 
 | 	"S/PDIF RCA", | 
 | 	"S/PDIF Optical", | 
 | 	"Dual ADAT", | 
 | 	NULL | 
 | }; | 
 |  | 
 | static const struct scarlett2_device_info s18i20_gen3_info = { | 
 | 	.config_set = &scarlett2_config_set_gen3c, | 
 | 	.has_speaker_switching = 1, | 
 | 	.has_talkback = 1, | 
 | 	.level_input_count = 2, | 
 | 	.pad_input_count = 8, | 
 | 	.air_input_count = 8, | 
 | 	.phantom_count = 2, | 
 | 	.inputs_per_phantom = 4, | 
 |  | 
 | 	.spdif_mode_control_name = "Digital I/O Mode Capture Enum", | 
 | 	.spdif_mode_values = scarlett2_spdif_s18i20_gen3_values, | 
 | 	.spdif_mode_texts = scarlett2_spdif_s18i20_gen3_texts, | 
 |  | 
 | 	.line_out_descrs = { | 
 | 		"Monitor 1 L", | 
 | 		"Monitor 1 R", | 
 | 		"Monitor 2 L", | 
 | 		"Monitor 2 R", | 
 | 		NULL, | 
 | 		NULL, | 
 | 		"Headphones 1 L", | 
 | 		"Headphones 1 R", | 
 | 		"Headphones 2 L", | 
 | 		"Headphones 2 R", | 
 | 	}, | 
 |  | 
 | 	.port_count = { | 
 | 		[SCARLETT2_PORT_TYPE_NONE]     = {  1,  0 }, | 
 | 		[SCARLETT2_PORT_TYPE_ANALOGUE] = {  9, 10 }, | 
 | 		[SCARLETT2_PORT_TYPE_SPDIF]    = {  2,  2 }, | 
 | 		[SCARLETT2_PORT_TYPE_ADAT]     = {  8,  8 }, | 
 | 		[SCARLETT2_PORT_TYPE_MIX]      = { 12, 25 }, | 
 | 		[SCARLETT2_PORT_TYPE_PCM]      = { 20, 20 }, | 
 | 	}, | 
 |  | 
 | 	.mux_assignment = { { | 
 | 		{ SCARLETT2_PORT_TYPE_PCM,       0,  8 }, | 
 | 		{ SCARLETT2_PORT_TYPE_PCM,      10, 10 }, | 
 | 		{ SCARLETT2_PORT_TYPE_ANALOGUE,  0, 10 }, | 
 | 		{ SCARLETT2_PORT_TYPE_SPDIF,     0,  2 }, | 
 | 		{ SCARLETT2_PORT_TYPE_ADAT,      0,  8 }, | 
 | 		{ SCARLETT2_PORT_TYPE_PCM,       8,  2 }, | 
 | 		{ SCARLETT2_PORT_TYPE_MIX,       0, 25 }, | 
 | 		{ SCARLETT2_PORT_TYPE_NONE,      0, 12 }, | 
 | 		{ 0,                             0,  0 }, | 
 | 	}, { | 
 | 		{ SCARLETT2_PORT_TYPE_PCM,       0,  8 }, | 
 | 		{ SCARLETT2_PORT_TYPE_PCM,      10,  8 }, | 
 | 		{ SCARLETT2_PORT_TYPE_ANALOGUE,  0, 10 }, | 
 | 		{ SCARLETT2_PORT_TYPE_SPDIF,     0,  2 }, | 
 | 		{ SCARLETT2_PORT_TYPE_ADAT,      0,  8 }, | 
 | 		{ SCARLETT2_PORT_TYPE_PCM,       8,  2 }, | 
 | 		{ SCARLETT2_PORT_TYPE_MIX,       0, 25 }, | 
 | 		{ SCARLETT2_PORT_TYPE_NONE,      0, 10 }, | 
 | 		{ 0,                             0,  0 }, | 
 | 	}, { | 
 | 		{ SCARLETT2_PORT_TYPE_PCM,       0, 10 }, | 
 | 		{ SCARLETT2_PORT_TYPE_ANALOGUE,  0, 10 }, | 
 | 		{ SCARLETT2_PORT_TYPE_SPDIF,     0,  2 }, | 
 | 		{ SCARLETT2_PORT_TYPE_NONE,      0, 24 }, | 
 | 		{ 0,                             0,  0 }, | 
 | 	} }, | 
 |  | 
 | 	.meter_map = { | 
 | 		{ 45,  8 }, | 
 | 		{ 55, 10 }, | 
 | 		{  0, 20 }, | 
 | 		{ 53,  2 }, | 
 | 		{ 20, 25 }, | 
 | 		{  0,  0 }, | 
 | 	} | 
 | }; | 
 |  | 
 | static const struct scarlett2_device_info vocaster_one_info = { | 
 | 	.config_set = &scarlett2_config_set_vocaster, | 
 | 	.min_firmware_version = 1769, | 
 | 	.has_devmap = 1, | 
 |  | 
 | 	.phantom_count = 1, | 
 | 	.inputs_per_phantom = 1, | 
 | 	.dsp_count = 1, | 
 | 	.dsp_input_count = 1, | 
 | 	.precomp_flt_count = 2, | 
 | 	.peq_flt_count = 3, | 
 | 	.peq_flt_total_count = 4, | 
 | 	.mute_input_count = 1, | 
 | 	.gain_input_count = 1, | 
 |  | 
 | 	.port_count = { | 
 | 		[SCARLETT2_PORT_TYPE_NONE]     = { 1,  0 }, | 
 | 		[SCARLETT2_PORT_TYPE_ANALOGUE] = { 2,  4 }, | 
 | 		[SCARLETT2_PORT_TYPE_MIX]      = { 9,  9 }, | 
 | 		[SCARLETT2_PORT_TYPE_PCM]      = { 4, 10 }, | 
 | 	}, | 
 |  | 
 | 	.mux_assignment = { { | 
 | 		{ SCARLETT2_PORT_TYPE_MIX,      8, 1 }, | 
 | 		{ SCARLETT2_PORT_TYPE_PCM,      5, 5 }, | 
 | 		{ SCARLETT2_PORT_TYPE_MIX,      6, 2 }, | 
 | 		{ SCARLETT2_PORT_TYPE_PCM,      0, 5 }, | 
 | 		{ SCARLETT2_PORT_TYPE_MIX,      0, 6 }, | 
 | 		{ SCARLETT2_PORT_TYPE_ANALOGUE, 0, 4 }, | 
 | 		{ 0, 0, 0 }, | 
 | 	} }, | 
 |  | 
 | 	.meter_map = { | 
 | 		{ 12, 1 }, | 
 | 		{ 18, 5 }, | 
 | 		{ 10, 2 }, | 
 | 		{ 13, 5 }, | 
 | 		{  4, 6 }, | 
 | 		{  0, 4 }, | 
 | 		{  0, 0 } | 
 | 	} | 
 | }; | 
 |  | 
 | static const struct scarlett2_device_info vocaster_two_info = { | 
 | 	.config_set = &scarlett2_config_set_vocaster, | 
 | 	.min_firmware_version = 1769, | 
 | 	.has_devmap = 1, | 
 |  | 
 | 	.phantom_count = 2, | 
 | 	.inputs_per_phantom = 1, | 
 | 	.dsp_count = 2, | 
 | 	.dsp_input_count = 2, | 
 | 	.precomp_flt_count = 2, | 
 | 	.peq_flt_count = 3, | 
 | 	.peq_flt_total_count = 4, | 
 | 	.mute_input_count = 2, | 
 | 	.gain_input_count = 2, | 
 | 	.has_bluetooth = 1, | 
 |  | 
 | 	.port_count = { | 
 | 		[SCARLETT2_PORT_TYPE_NONE]     = {  1,  0 }, | 
 | 		[SCARLETT2_PORT_TYPE_ANALOGUE] = {  6,  6 }, | 
 | 		[SCARLETT2_PORT_TYPE_MIX]      = { 12, 14 }, | 
 | 		[SCARLETT2_PORT_TYPE_PCM]      = {  4, 14 }, | 
 | 	}, | 
 |  | 
 | 	.mux_assignment = { { | 
 | 		{ SCARLETT2_PORT_TYPE_MIX,      12,  2 }, | 
 | 		{ SCARLETT2_PORT_TYPE_PCM,       6,  8 }, | 
 | 		{ SCARLETT2_PORT_TYPE_MIX,      10,  2 }, | 
 | 		{ SCARLETT2_PORT_TYPE_PCM,       0,  6 }, | 
 | 		{ SCARLETT2_PORT_TYPE_MIX,       0, 10 }, | 
 | 		{ SCARLETT2_PORT_TYPE_ANALOGUE,  0,  6 }, | 
 | 		{ 0, 0, 0 }, | 
 | 	} }, | 
 |  | 
 | 	.meter_map = { | 
 | 		{ 18,  2 }, | 
 | 		{ 26,  8 }, | 
 | 		{ 16,  2 }, | 
 | 		{ 20,  6 }, | 
 | 		{  6, 10 }, | 
 | 		{  0,  6 }, | 
 | 		{  0,  0 } | 
 | 	} | 
 | }; | 
 |  | 
 | static const struct scarlett2_device_info solo_gen4_info = { | 
 | 	.config_set = &scarlett2_config_set_gen4_solo, | 
 | 	.min_firmware_version = 2115, | 
 | 	.has_devmap = 1, | 
 |  | 
 | 	.level_input_count = 1, | 
 | 	.air_input_count = 1, | 
 | 	.air_input_first = 1, | 
 | 	.air_option = 1, | 
 | 	.phantom_count = 1, | 
 | 	.phantom_first = 1, | 
 | 	.inputs_per_phantom = 1, | 
 | 	.direct_monitor = 1, | 
 | 	.dsp_count = 2, | 
 |  | 
 | 	.port_count = { | 
 | 		[SCARLETT2_PORT_TYPE_NONE]     = { 1,  0 }, | 
 | 		[SCARLETT2_PORT_TYPE_ANALOGUE] = { 2,  2 }, | 
 | 		[SCARLETT2_PORT_TYPE_MIX]      = { 8,  6 }, | 
 | 		[SCARLETT2_PORT_TYPE_PCM]      = { 2,  4 }, | 
 | 	}, | 
 |  | 
 | 	.mux_assignment = { { | 
 | 		{ SCARLETT2_PORT_TYPE_MIX,       4,  2 }, | 
 | 		{ SCARLETT2_PORT_TYPE_MIX,       2,  2 }, | 
 | 		{ SCARLETT2_PORT_TYPE_PCM,       0,  4 }, | 
 | 		{ SCARLETT2_PORT_TYPE_MIX,       0,  2 }, | 
 | 		{ SCARLETT2_PORT_TYPE_ANALOGUE,  0,  2 }, | 
 | 		{ 0,                             0,  0 }, | 
 | 	}, { | 
 | 		{ SCARLETT2_PORT_TYPE_MIX,       4,  2 }, | 
 | 		{ SCARLETT2_PORT_TYPE_MIX,       2,  2 }, | 
 | 		{ SCARLETT2_PORT_TYPE_PCM,       0,  4 }, | 
 | 		{ SCARLETT2_PORT_TYPE_MIX,       0,  2 }, | 
 | 		{ SCARLETT2_PORT_TYPE_ANALOGUE,  0,  2 }, | 
 | 		{ 0,                             0,  0 }, | 
 | 	}, { | 
 | 		{ SCARLETT2_PORT_TYPE_MIX,       4,  2 }, | 
 | 		{ SCARLETT2_PORT_TYPE_MIX,       2,  2 }, | 
 | 		{ SCARLETT2_PORT_TYPE_PCM,       0,  4 }, | 
 | 		{ SCARLETT2_PORT_TYPE_MIX,       0,  2 }, | 
 | 		{ SCARLETT2_PORT_TYPE_ANALOGUE,  0,  2 }, | 
 | 		{ 0,                             0,  0 }, | 
 | 	} }, | 
 |  | 
 | 	.meter_map = { | 
 | 		{  6,  2 }, | 
 | 		{  4,  2 }, | 
 | 		{  8,  4 }, | 
 | 		{  2,  2 }, | 
 | 		{  0,  2 }, | 
 | 		{  0,  0 } | 
 | 	} | 
 | }; | 
 |  | 
 | static const struct scarlett2_device_info s2i2_gen4_info = { | 
 | 	.config_set = &scarlett2_config_set_gen4_2i2, | 
 | 	.min_firmware_version = 2115, | 
 | 	.has_devmap = 1, | 
 |  | 
 | 	.level_input_count = 2, | 
 | 	.air_input_count = 2, | 
 | 	.air_option = 1, | 
 | 	.phantom_count = 1, | 
 | 	.inputs_per_phantom = 2, | 
 | 	.gain_input_count = 2, | 
 | 	.safe_input_count = 2, | 
 | 	.direct_monitor = 2, | 
 | 	.dsp_count = 2, | 
 |  | 
 | 	.port_count = { | 
 | 		[SCARLETT2_PORT_TYPE_NONE]     = { 1,  0 }, | 
 | 		[SCARLETT2_PORT_TYPE_ANALOGUE] = { 2,  2 }, | 
 | 		[SCARLETT2_PORT_TYPE_MIX]      = { 6,  6 }, | 
 | 		[SCARLETT2_PORT_TYPE_PCM]      = { 2,  4 }, | 
 | 	}, | 
 |  | 
 | 	.mux_assignment = { { | 
 | 		{ SCARLETT2_PORT_TYPE_MIX,       4,  2 }, | 
 | 		{ SCARLETT2_PORT_TYPE_MIX,       2,  2 }, | 
 | 		{ SCARLETT2_PORT_TYPE_PCM,       0,  4 }, | 
 | 		{ SCARLETT2_PORT_TYPE_MIX,       0,  2 }, | 
 | 		{ SCARLETT2_PORT_TYPE_ANALOGUE,  0,  2 }, | 
 | 		{ 0,                             0,  0 }, | 
 | 	}, { | 
 | 		{ SCARLETT2_PORT_TYPE_MIX,       4,  2 }, | 
 | 		{ SCARLETT2_PORT_TYPE_MIX,       2,  2 }, | 
 | 		{ SCARLETT2_PORT_TYPE_PCM,       0,  4 }, | 
 | 		{ SCARLETT2_PORT_TYPE_MIX,       0,  2 }, | 
 | 		{ SCARLETT2_PORT_TYPE_ANALOGUE,  0,  2 }, | 
 | 		{ 0,                             0,  0 }, | 
 | 	}, { | 
 | 		{ SCARLETT2_PORT_TYPE_MIX,       4,  2 }, | 
 | 		{ SCARLETT2_PORT_TYPE_MIX,       2,  2 }, | 
 | 		{ SCARLETT2_PORT_TYPE_PCM,       0,  4 }, | 
 | 		{ SCARLETT2_PORT_TYPE_MIX,       0,  2 }, | 
 | 		{ SCARLETT2_PORT_TYPE_ANALOGUE,  0,  2 }, | 
 | 		{ 0,                             0,  0 }, | 
 | 	} }, | 
 |  | 
 | 	.meter_map = { | 
 | 		{  6,  2 }, | 
 | 		{  4,  2 }, | 
 | 		{  8,  4 }, | 
 | 		{  2,  2 }, | 
 | 		{  0,  2 }, | 
 | 		{  0,  0 } | 
 | 	} | 
 | }; | 
 |  | 
 | static const struct scarlett2_device_info s4i4_gen4_info = { | 
 | 	.config_set = &scarlett2_config_set_gen4_4i4, | 
 | 	.min_firmware_version = 2089, | 
 | 	.has_devmap = 1, | 
 |  | 
 | 	.level_input_count = 2, | 
 | 	.air_input_count = 2, | 
 | 	.air_option = 1, | 
 | 	.phantom_count = 2, | 
 | 	.inputs_per_phantom = 1, | 
 | 	.gain_input_count = 2, | 
 | 	.safe_input_count = 2, | 
 | 	.dsp_count = 2, | 
 |  | 
 | 	.port_count = { | 
 | 		[SCARLETT2_PORT_TYPE_NONE]     = { 1,  0 }, | 
 | 		[SCARLETT2_PORT_TYPE_ANALOGUE] = { 4,  6 }, | 
 | 		[SCARLETT2_PORT_TYPE_MIX]      = { 8, 12 }, | 
 | 		[SCARLETT2_PORT_TYPE_PCM]      = { 6,  6 }, | 
 | 	}, | 
 |  | 
 | 	.mux_assignment = { { | 
 | 		{ SCARLETT2_PORT_TYPE_MIX,      10,  2 }, | 
 | 		{ SCARLETT2_PORT_TYPE_PCM,       0,  6 }, | 
 | 		{ SCARLETT2_PORT_TYPE_MIX,       0, 10 }, | 
 | 		{ SCARLETT2_PORT_TYPE_ANALOGUE,  0,  6 }, | 
 | 		{ 0,                             0,  0 }, | 
 | 	}, { | 
 | 		{ SCARLETT2_PORT_TYPE_MIX,      10,  2 }, | 
 | 		{ SCARLETT2_PORT_TYPE_PCM,       0,  6 }, | 
 | 		{ SCARLETT2_PORT_TYPE_MIX,       0, 10 }, | 
 | 		{ SCARLETT2_PORT_TYPE_ANALOGUE,  0,  6 }, | 
 | 		{ 0,                             0,  0 }, | 
 | 	}, { | 
 | 		{ SCARLETT2_PORT_TYPE_MIX,      10,  2 }, | 
 | 		{ SCARLETT2_PORT_TYPE_PCM,       0,  6 }, | 
 | 		{ SCARLETT2_PORT_TYPE_MIX,       0, 10 }, | 
 | 		{ SCARLETT2_PORT_TYPE_ANALOGUE,  0,  6 }, | 
 | 		{ 0,                             0,  0 }, | 
 | 	} }, | 
 |  | 
 | 	.meter_map = { | 
 | 		{ 16,  8 }, | 
 | 		{  6, 10 }, | 
 | 		{  0,  6 }, | 
 | 		{  0,  0 } | 
 | 	} | 
 | }; | 
 |  | 
 | static const struct scarlett2_device_info clarett_2pre_info = { | 
 | 	.config_set = &scarlett2_config_set_clarett, | 
 | 	.level_input_count = 2, | 
 | 	.air_input_count = 2, | 
 |  | 
 | 	.line_out_descrs = { | 
 | 		"Monitor L", | 
 | 		"Monitor R", | 
 | 		"Headphones L", | 
 | 		"Headphones R", | 
 | 	}, | 
 |  | 
 | 	.port_count = { | 
 | 		[SCARLETT2_PORT_TYPE_NONE]     = {  1,  0 }, | 
 | 		[SCARLETT2_PORT_TYPE_ANALOGUE] = {  2,  4 }, | 
 | 		[SCARLETT2_PORT_TYPE_SPDIF]    = {  2,  0 }, | 
 | 		[SCARLETT2_PORT_TYPE_ADAT]     = {  8,  0 }, | 
 | 		[SCARLETT2_PORT_TYPE_MIX]      = { 10, 18 }, | 
 | 		[SCARLETT2_PORT_TYPE_PCM]      = {  4, 12 }, | 
 | 	}, | 
 |  | 
 | 	.mux_assignment = { { | 
 | 		{ SCARLETT2_PORT_TYPE_PCM,      0, 12 }, | 
 | 		{ SCARLETT2_PORT_TYPE_ANALOGUE, 0,  4 }, | 
 | 		{ SCARLETT2_PORT_TYPE_MIX,      0, 18 }, | 
 | 		{ SCARLETT2_PORT_TYPE_NONE,     0,  8 }, | 
 | 		{ 0,                            0,  0 }, | 
 | 	}, { | 
 | 		{ SCARLETT2_PORT_TYPE_PCM,      0,  8 }, | 
 | 		{ SCARLETT2_PORT_TYPE_ANALOGUE, 0,  4 }, | 
 | 		{ SCARLETT2_PORT_TYPE_MIX,      0, 18 }, | 
 | 		{ SCARLETT2_PORT_TYPE_NONE,     0,  8 }, | 
 | 		{ 0,                            0,  0 }, | 
 | 	}, { | 
 | 		{ SCARLETT2_PORT_TYPE_PCM,      0,  2 }, | 
 | 		{ SCARLETT2_PORT_TYPE_ANALOGUE, 0,  4 }, | 
 | 		{ SCARLETT2_PORT_TYPE_NONE,     0, 26 }, | 
 | 		{ 0,                            0,  0 }, | 
 | 	} }, | 
 |  | 
 | 	.meter_map = { | 
 | 		{ 22, 12 }, | 
 | 		{  0, 22 }, | 
 | 		{  0,  0 } | 
 | 	} | 
 | }; | 
 |  | 
 | static const u8 scarlett2_spdif_clarett_values[] = { 0, 1, 2, 0xff }; | 
 |  | 
 | static const char * const scarlett2_spdif_clarett_texts[] = { | 
 | 	"None", | 
 | 	"Optical", | 
 | 	"RCA", | 
 | 	NULL | 
 | }; | 
 |  | 
 | static const struct scarlett2_device_info clarett_4pre_info = { | 
 | 	.config_set = &scarlett2_config_set_clarett, | 
 | 	.level_input_count = 2, | 
 | 	.air_input_count = 4, | 
 |  | 
 | 	.spdif_mode_control_name = "S/PDIF Source Capture Enum", | 
 | 	.spdif_mode_values = scarlett2_spdif_clarett_values, | 
 | 	.spdif_mode_texts = scarlett2_spdif_clarett_texts, | 
 |  | 
 | 	.line_out_descrs = { | 
 | 		"Monitor L", | 
 | 		"Monitor R", | 
 | 		"Headphones 1 L", | 
 | 		"Headphones 1 R", | 
 | 		"Headphones 2 L", | 
 | 		"Headphones 2 R", | 
 | 	}, | 
 |  | 
 | 	.port_count = { | 
 | 		[SCARLETT2_PORT_TYPE_NONE]     = {  1,  0 }, | 
 | 		[SCARLETT2_PORT_TYPE_ANALOGUE] = {  8,  6 }, | 
 | 		[SCARLETT2_PORT_TYPE_SPDIF]    = {  2,  2 }, | 
 | 		[SCARLETT2_PORT_TYPE_ADAT]     = {  8,  0 }, | 
 | 		[SCARLETT2_PORT_TYPE_MIX]      = { 10, 18 }, | 
 | 		[SCARLETT2_PORT_TYPE_PCM]      = {  8, 18 }, | 
 | 	}, | 
 |  | 
 | 	.mux_assignment = { { | 
 | 		{ SCARLETT2_PORT_TYPE_PCM,      0, 18 }, | 
 | 		{ SCARLETT2_PORT_TYPE_ANALOGUE, 0,  6 }, | 
 | 		{ SCARLETT2_PORT_TYPE_SPDIF,    0,  2 }, | 
 | 		{ SCARLETT2_PORT_TYPE_MIX,      0, 18 }, | 
 | 		{ SCARLETT2_PORT_TYPE_NONE,     0,  8 }, | 
 | 		{ 0,                            0,  0 }, | 
 | 	}, { | 
 | 		{ SCARLETT2_PORT_TYPE_PCM,      0, 14 }, | 
 | 		{ SCARLETT2_PORT_TYPE_ANALOGUE, 0,  6 }, | 
 | 		{ SCARLETT2_PORT_TYPE_SPDIF,    0,  2 }, | 
 | 		{ SCARLETT2_PORT_TYPE_MIX,      0, 18 }, | 
 | 		{ SCARLETT2_PORT_TYPE_NONE,     0,  8 }, | 
 | 		{ 0,                            0,  0 }, | 
 | 	}, { | 
 | 		{ SCARLETT2_PORT_TYPE_PCM,      0, 12 }, | 
 | 		{ SCARLETT2_PORT_TYPE_ANALOGUE, 0,  6 }, | 
 | 		{ SCARLETT2_PORT_TYPE_SPDIF,    0,  2 }, | 
 | 		{ SCARLETT2_PORT_TYPE_NONE,     0, 24 }, | 
 | 		{ 0,                            0,  0 }, | 
 | 	} }, | 
 |  | 
 | 	.meter_map = { | 
 | 		{ 26, 18 }, | 
 | 		{  0, 26 }, | 
 | 		{  0,  0 } | 
 | 	} | 
 | }; | 
 |  | 
 | static const struct scarlett2_device_info clarett_8pre_info = { | 
 | 	.config_set = &scarlett2_config_set_clarett, | 
 | 	.level_input_count = 2, | 
 | 	.air_input_count = 8, | 
 |  | 
 | 	.spdif_mode_control_name = "S/PDIF Source Capture Enum", | 
 | 	.spdif_mode_values = scarlett2_spdif_clarett_values, | 
 | 	.spdif_mode_texts = scarlett2_spdif_clarett_texts, | 
 |  | 
 | 	.line_out_descrs = { | 
 | 		"Monitor L", | 
 | 		"Monitor R", | 
 | 		NULL, | 
 | 		NULL, | 
 | 		NULL, | 
 | 		NULL, | 
 | 		"Headphones 1 L", | 
 | 		"Headphones 1 R", | 
 | 		"Headphones 2 L", | 
 | 		"Headphones 2 R", | 
 | 	}, | 
 |  | 
 | 	.port_count = { | 
 | 		[SCARLETT2_PORT_TYPE_NONE]     = {  1,  0 }, | 
 | 		[SCARLETT2_PORT_TYPE_ANALOGUE] = {  8, 10 }, | 
 | 		[SCARLETT2_PORT_TYPE_SPDIF]    = {  2,  2 }, | 
 | 		[SCARLETT2_PORT_TYPE_ADAT]     = {  8,  8 }, | 
 | 		[SCARLETT2_PORT_TYPE_MIX]      = { 10, 18 }, | 
 | 		[SCARLETT2_PORT_TYPE_PCM]      = { 20, 18 }, | 
 | 	}, | 
 |  | 
 | 	.mux_assignment = { { | 
 | 		{ SCARLETT2_PORT_TYPE_PCM,      0, 18 }, | 
 | 		{ SCARLETT2_PORT_TYPE_ANALOGUE, 0, 10 }, | 
 | 		{ SCARLETT2_PORT_TYPE_SPDIF,    0,  2 }, | 
 | 		{ SCARLETT2_PORT_TYPE_ADAT,     0,  8 }, | 
 | 		{ SCARLETT2_PORT_TYPE_MIX,      0, 18 }, | 
 | 		{ SCARLETT2_PORT_TYPE_NONE,     0,  8 }, | 
 | 		{ 0,                            0,  0 }, | 
 | 	}, { | 
 | 		{ SCARLETT2_PORT_TYPE_PCM,      0, 14 }, | 
 | 		{ SCARLETT2_PORT_TYPE_ANALOGUE, 0, 10 }, | 
 | 		{ SCARLETT2_PORT_TYPE_SPDIF,    0,  2 }, | 
 | 		{ SCARLETT2_PORT_TYPE_ADAT,     0,  4 }, | 
 | 		{ SCARLETT2_PORT_TYPE_MIX,      0, 18 }, | 
 | 		{ SCARLETT2_PORT_TYPE_NONE,     0,  8 }, | 
 | 		{ 0,                            0,  0 }, | 
 | 	}, { | 
 | 		{ SCARLETT2_PORT_TYPE_PCM,      0, 12 }, | 
 | 		{ SCARLETT2_PORT_TYPE_ANALOGUE, 0, 10 }, | 
 | 		{ SCARLETT2_PORT_TYPE_SPDIF,    0,  2 }, | 
 | 		{ SCARLETT2_PORT_TYPE_NONE,     0, 22 }, | 
 | 		{ 0,                            0,  0 }, | 
 | 	} }, | 
 |  | 
 | 	.meter_map = { | 
 | 		{ 38, 18 }, | 
 | 		{  0, 38 }, | 
 | 		{  0,  0 } | 
 | 	} | 
 | }; | 
 |  | 
 | struct scarlett2_device_entry { | 
 | 	const u32 usb_id; /* USB device identifier */ | 
 | 	const struct scarlett2_device_info *info; | 
 | 	const char *series_name; | 
 | }; | 
 |  | 
 | static const struct scarlett2_device_entry scarlett2_devices[] = { | 
 | 	/* Supported Gen 2 devices */ | 
 | 	{ USB_ID(0x1235, 0x8203), &s6i6_gen2_info, "Scarlett Gen 2" }, | 
 | 	{ USB_ID(0x1235, 0x8204), &s18i8_gen2_info, "Scarlett Gen 2" }, | 
 | 	{ USB_ID(0x1235, 0x8201), &s18i20_gen2_info, "Scarlett Gen 2" }, | 
 |  | 
 | 	/* Supported Gen 3 devices */ | 
 | 	{ USB_ID(0x1235, 0x8211), &solo_gen3_info, "Scarlett Gen 3" }, | 
 | 	{ USB_ID(0x1235, 0x8210), &s2i2_gen3_info, "Scarlett Gen 3" }, | 
 | 	{ USB_ID(0x1235, 0x8212), &s4i4_gen3_info, "Scarlett Gen 3" }, | 
 | 	{ USB_ID(0x1235, 0x8213), &s8i6_gen3_info, "Scarlett Gen 3" }, | 
 | 	{ USB_ID(0x1235, 0x8214), &s18i8_gen3_info, "Scarlett Gen 3" }, | 
 | 	{ USB_ID(0x1235, 0x8215), &s18i20_gen3_info, "Scarlett Gen 3" }, | 
 |  | 
 | 	/* Supported Vocaster devices */ | 
 | 	{ USB_ID(0x1235, 0x8216), &vocaster_one_info, "Vocaster" }, | 
 | 	{ USB_ID(0x1235, 0x8217), &vocaster_two_info, "Vocaster" }, | 
 |  | 
 | 	/* Supported Gen 4 devices */ | 
 | 	{ USB_ID(0x1235, 0x8218), &solo_gen4_info, "Scarlett Gen 4" }, | 
 | 	{ USB_ID(0x1235, 0x8219), &s2i2_gen4_info, "Scarlett Gen 4" }, | 
 | 	{ USB_ID(0x1235, 0x821a), &s4i4_gen4_info, "Scarlett Gen 4" }, | 
 |  | 
 | 	/* Supported Clarett USB/Clarett+ devices */ | 
 | 	{ USB_ID(0x1235, 0x8206), &clarett_2pre_info, "Clarett USB" }, | 
 | 	{ USB_ID(0x1235, 0x8207), &clarett_4pre_info, "Clarett USB" }, | 
 | 	{ USB_ID(0x1235, 0x8208), &clarett_8pre_info, "Clarett USB" }, | 
 | 	{ USB_ID(0x1235, 0x820a), &clarett_2pre_info, "Clarett+" }, | 
 | 	{ USB_ID(0x1235, 0x820b), &clarett_4pre_info, "Clarett+" }, | 
 | 	{ USB_ID(0x1235, 0x820c), &clarett_8pre_info, "Clarett+" }, | 
 |  | 
 | 	/* End of list */ | 
 | 	{ 0, NULL }, | 
 | }; | 
 |  | 
 | /* get the starting port index number for a given port type/direction */ | 
 | static int scarlett2_get_port_start_num( | 
 | 	const int port_count[][SCARLETT2_PORT_DIRNS], | 
 | 	int direction, int port_type) | 
 | { | 
 | 	int i, num = 0; | 
 |  | 
 | 	for (i = 0; i < port_type; i++) | 
 | 		num += port_count[i][direction]; | 
 |  | 
 | 	return num; | 
 | } | 
 |  | 
 | /*** USB Interactions ***/ | 
 |  | 
 | /* Commands for sending/receiving requests/responses */ | 
 | #define SCARLETT2_USB_CMD_INIT 0 | 
 | #define SCARLETT2_USB_CMD_REQ  2 | 
 | #define SCARLETT2_USB_CMD_RESP 3 | 
 |  | 
 | #define SCARLETT2_USB_INIT_1        0x00000000 | 
 | #define SCARLETT2_USB_INIT_2        0x00000002 | 
 | #define SCARLETT2_USB_REBOOT        0x00000003 | 
 | #define SCARLETT2_USB_GET_METER     0x00001001 | 
 | #define SCARLETT2_USB_GET_MIX       0x00002001 | 
 | #define SCARLETT2_USB_SET_MIX       0x00002002 | 
 | #define SCARLETT2_USB_GET_MUX       0x00003001 | 
 | #define SCARLETT2_USB_SET_MUX       0x00003002 | 
 | #define SCARLETT2_USB_INFO_FLASH    0x00004000 | 
 | #define SCARLETT2_USB_INFO_SEGMENT  0x00004001 | 
 | #define SCARLETT2_USB_ERASE_SEGMENT 0x00004002 | 
 | #define SCARLETT2_USB_GET_ERASE     0x00004003 | 
 | #define SCARLETT2_USB_WRITE_SEGMENT 0x00004004 | 
 | #define SCARLETT2_USB_READ_SEGMENT  0x00004005 | 
 | #define SCARLETT2_USB_GET_SYNC      0x00006004 | 
 | #define SCARLETT2_USB_GET_DATA      0x00800000 | 
 | #define SCARLETT2_USB_SET_DATA      0x00800001 | 
 | #define SCARLETT2_USB_DATA_CMD      0x00800002 | 
 | #define SCARLETT2_USB_INFO_DEVMAP   0x0080000c | 
 | #define SCARLETT2_USB_GET_DEVMAP    0x0080000d | 
 |  | 
 | #define SCARLETT2_USB_CONFIG_SAVE 6 | 
 |  | 
 | #define SCARLETT2_USB_METER_LEVELS_GET_MAGIC 1 | 
 |  | 
 | #define SCARLETT2_FLASH_BLOCK_SIZE 4096 | 
 | #define SCARLETT2_FLASH_RW_MAX 1024 | 
 | #define SCARLETT2_SEGMENT_NUM_MIN 1 | 
 | #define SCARLETT2_SEGMENT_NUM_MAX 4 | 
 |  | 
 | #define SCARLETT2_SEGMENT_SETTINGS_NAME "App_Settings" | 
 | #define SCARLETT2_SEGMENT_FIRMWARE_NAME "App_Upgrade" | 
 |  | 
 | /* Gen 4 device firmware provides access to a base64-encoded | 
 |  * zlib-compressed JSON description of the device's capabilities and | 
 |  * configuration. This device map is made available in | 
 |  * /proc/asound/cardX/device-map.json.zz.b64 | 
 |  */ | 
 | #define SCARLETT2_DEVMAP_BLOCK_SIZE 1024 | 
 | #define SCARLETT2_DEVMAP_FILENAME "device-map.json.zz.b64" | 
 |  | 
 | /* proprietary request/response format */ | 
 | struct scarlett2_usb_packet { | 
 | 	__le32 cmd; | 
 | 	__le16 size; | 
 | 	__le16 seq; | 
 | 	__le32 error; | 
 | 	__le32 pad; | 
 | 	u8 data[]; | 
 | }; | 
 |  | 
 | static void scarlett2_fill_request_header(struct scarlett2_data *private, | 
 | 					  struct scarlett2_usb_packet *req, | 
 | 					  u32 cmd, u16 req_size) | 
 | { | 
 | 	/* sequence must go up by 1 for each request */ | 
 | 	u16 seq = private->scarlett2_seq++; | 
 |  | 
 | 	req->cmd = cpu_to_le32(cmd); | 
 | 	req->size = cpu_to_le16(req_size); | 
 | 	req->seq = cpu_to_le16(seq); | 
 | 	req->error = 0; | 
 | 	req->pad = 0; | 
 | } | 
 |  | 
 | static int scarlett2_usb_tx(struct usb_device *dev, int interface, | 
 | 			    void *buf, u16 size) | 
 | { | 
 | 	return snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), | 
 | 			SCARLETT2_USB_CMD_REQ, | 
 | 			USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_OUT, | 
 | 			0, interface, buf, size); | 
 | } | 
 |  | 
 | static int scarlett2_usb_rx(struct usb_device *dev, int interface, | 
 | 			    u32 usb_req, void *buf, u16 size) | 
 | { | 
 | 	return snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), | 
 | 			usb_req, | 
 | 			USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN, | 
 | 			0, interface, buf, size); | 
 | } | 
 |  | 
 | /* Send a proprietary format request to the Scarlett interface */ | 
 | static int scarlett2_usb( | 
 | 	struct usb_mixer_interface *mixer, u32 cmd, | 
 | 	void *req_data, u16 req_size, void *resp_data, u16 resp_size) | 
 | { | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	struct usb_device *dev = mixer->chip->dev; | 
 | 	struct scarlett2_usb_packet *req, *resp = NULL; | 
 | 	size_t req_buf_size = struct_size(req, data, req_size); | 
 | 	size_t resp_buf_size = struct_size(resp, data, resp_size); | 
 | 	int retries = 0; | 
 | 	const int max_retries = 5; | 
 | 	int err; | 
 |  | 
 | 	req = kmalloc(req_buf_size, GFP_KERNEL); | 
 | 	if (!req) { | 
 | 		err = -ENOMEM; | 
 | 		goto error; | 
 | 	} | 
 |  | 
 | 	resp = kmalloc(resp_buf_size, GFP_KERNEL); | 
 | 	if (!resp) { | 
 | 		err = -ENOMEM; | 
 | 		goto error; | 
 | 	} | 
 |  | 
 | 	mutex_lock(&private->usb_mutex); | 
 |  | 
 | 	/* build request message and send it */ | 
 |  | 
 | 	scarlett2_fill_request_header(private, req, cmd, req_size); | 
 |  | 
 | 	if (req_size) | 
 | 		memcpy(req->data, req_data, req_size); | 
 |  | 
 | retry: | 
 | 	err = scarlett2_usb_tx(dev, private->bInterfaceNumber, | 
 | 			       req, req_buf_size); | 
 |  | 
 | 	if (err != req_buf_size) { | 
 | 		if (err == -EPROTO && ++retries <= max_retries) { | 
 | 			msleep(5 * (1 << (retries - 1))); | 
 | 			goto retry; | 
 | 		} | 
 | 		usb_audio_err( | 
 | 			mixer->chip, | 
 | 			"%s USB request result cmd %x was %d\n", | 
 | 			private->series_name, cmd, err); | 
 | 		err = -EINVAL; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	if (!wait_for_completion_timeout(&private->cmd_done, | 
 | 					 msecs_to_jiffies(1000))) { | 
 | 		usb_audio_err( | 
 | 			mixer->chip, | 
 | 			"%s USB request timed out, cmd %x\n", | 
 | 			private->series_name, cmd); | 
 |  | 
 | 		err = -ETIMEDOUT; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	/* send a second message to get the response */ | 
 |  | 
 | 	err = scarlett2_usb_rx(dev, private->bInterfaceNumber, | 
 | 			       SCARLETT2_USB_CMD_RESP, | 
 | 			       resp, resp_buf_size); | 
 |  | 
 | 	/* validate the response */ | 
 |  | 
 | 	if (err != resp_buf_size) { | 
 |  | 
 | 		/* ESHUTDOWN and EPROTO are valid responses to a | 
 | 		 * reboot request | 
 | 		 */ | 
 | 		if (cmd == SCARLETT2_USB_REBOOT && | 
 | 		    (err == -ESHUTDOWN || err == -EPROTO)) { | 
 | 			err = 0; | 
 | 			goto unlock; | 
 | 		} | 
 |  | 
 | 		usb_audio_err( | 
 | 			mixer->chip, | 
 | 			"%s USB response result cmd %x was %d expected %zu\n", | 
 | 			private->series_name, cmd, err, resp_buf_size); | 
 | 		err = -EINVAL; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	/* cmd/seq/size should match except when initialising | 
 | 	 * seq sent = 1, response = 0 | 
 | 	 */ | 
 | 	if (resp->cmd != req->cmd || | 
 | 	    (resp->seq != req->seq && | 
 | 		(le16_to_cpu(req->seq) != 1 || resp->seq != 0)) || | 
 | 	    resp_size != le16_to_cpu(resp->size) || | 
 | 	    resp->error || | 
 | 	    resp->pad) { | 
 | 		usb_audio_err( | 
 | 			mixer->chip, | 
 | 			"%s USB invalid response; " | 
 | 			   "cmd tx/rx %d/%d seq %d/%d size %d/%d " | 
 | 			   "error %d pad %d\n", | 
 | 			private->series_name, | 
 | 			le32_to_cpu(req->cmd), le32_to_cpu(resp->cmd), | 
 | 			le16_to_cpu(req->seq), le16_to_cpu(resp->seq), | 
 | 			resp_size, le16_to_cpu(resp->size), | 
 | 			le32_to_cpu(resp->error), | 
 | 			le32_to_cpu(resp->pad)); | 
 | 		err = -EINVAL; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	if (resp_data && resp_size > 0) | 
 | 		memcpy(resp_data, resp->data, resp_size); | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&private->usb_mutex); | 
 | error: | 
 | 	kfree(req); | 
 | 	kfree(resp); | 
 | 	return err; | 
 | } | 
 |  | 
 | /* Send a USB message to get data; result placed in *buf */ | 
 | static int scarlett2_usb_get( | 
 | 	struct usb_mixer_interface *mixer, | 
 | 	int offset, void *buf, int size) | 
 | { | 
 | 	struct { | 
 | 		__le32 offset; | 
 | 		__le32 size; | 
 | 	} __packed req; | 
 |  | 
 | 	req.offset = cpu_to_le32(offset); | 
 | 	req.size = cpu_to_le32(size); | 
 | 	return scarlett2_usb(mixer, SCARLETT2_USB_GET_DATA, | 
 | 			     &req, sizeof(req), buf, size); | 
 | } | 
 |  | 
 | /* Return true if the given configuration item is present in the | 
 |  * configuration set used by this device. | 
 |  */ | 
 | static int scarlett2_has_config_item( | 
 | 	struct scarlett2_data *private, int config_item_num) | 
 | { | 
 | 	return !!private->config_set->items[config_item_num].offset; | 
 | } | 
 |  | 
 | /* Send a USB message to get configuration parameters; result placed in *buf */ | 
 | static int scarlett2_usb_get_config( | 
 | 	struct usb_mixer_interface *mixer, | 
 | 	int config_item_num, int count, void *buf) | 
 | { | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	const struct scarlett2_config *config_item = | 
 | 		&private->config_set->items[config_item_num]; | 
 | 	int size, err, i; | 
 | 	u8 *buf_8; | 
 | 	u8 value; | 
 |  | 
 | 	/* Check that the configuration item is present in the | 
 | 	 * configuration set used by this device | 
 | 	 */ | 
 | 	if (!config_item->offset) | 
 | 		return -EFAULT; | 
 |  | 
 | 	/* Writes to the parameter buffer are always 1 byte */ | 
 | 	size = config_item->size ? config_item->size : 8; | 
 |  | 
 | 	/* For byte-sized parameters, retrieve directly into buf */ | 
 | 	if (size >= 8) { | 
 | 		size = size / 8 * count; | 
 | 		err = scarlett2_usb_get(mixer, config_item->offset, buf, size); | 
 | 		if (err < 0) | 
 | 			return err; | 
 | 		if (size == 2) { | 
 | 			u16 *buf_16 = buf; | 
 |  | 
 | 			for (i = 0; i < count; i++, buf_16++) | 
 | 				*buf_16 = le16_to_cpu(*(__le16 *)buf_16); | 
 | 		} else if (size == 4) { | 
 | 			u32 *buf_32 = buf; | 
 |  | 
 | 			for (i = 0; i < count; i++, buf_32++) | 
 | 				*buf_32 = le32_to_cpu(*(__le32 *)buf_32); | 
 | 		} | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	/* For bit-sized parameters, retrieve into value */ | 
 | 	err = scarlett2_usb_get(mixer, config_item->offset, &value, 1); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	/* then unpack from value into buf[] */ | 
 | 	buf_8 = buf; | 
 | 	for (i = 0; i < 8 && i < count; i++, value >>= 1) | 
 | 		*buf_8++ = value & 1; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* Send a SCARLETT2_USB_SET_DATA command. | 
 |  * offset: location in the device's data space | 
 |  * size: size in bytes of the value (1, 2, 4) | 
 |  */ | 
 | static int scarlett2_usb_set_data( | 
 | 	struct usb_mixer_interface *mixer, | 
 | 	int offset, int size, int value) | 
 | { | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	struct { | 
 | 		__le32 offset; | 
 | 		__le32 size; | 
 | 		__le32 value; | 
 | 	} __packed req; | 
 |  | 
 | 	req.offset = cpu_to_le32(offset); | 
 | 	req.size = cpu_to_le32(size); | 
 | 	req.value = cpu_to_le32(value); | 
 | 	return scarlett2_usb(private->mixer, SCARLETT2_USB_SET_DATA, | 
 | 			     &req, sizeof(u32) * 2 + size, NULL, 0); | 
 | } | 
 |  | 
 | /* Send a SCARLETT2_USB_SET_DATA command with multiple values. | 
 |  * offset: location in the device's data space | 
 |  * size: size in bytes of each value (1, 2, 4) | 
 |  * count: number of values | 
 |  */ | 
 | static int scarlett2_usb_set_data_buf( | 
 | 	struct usb_mixer_interface *mixer, | 
 | 	int offset, int size, int count, void *buf) | 
 | { | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	int bytes = size * count; | 
 | 	struct { | 
 | 		__le32 offset; | 
 | 		__le32 size; | 
 | 		u8 data[]; | 
 | 	} __packed *req; | 
 | 	int err; | 
 | 	int buf_size = struct_size(req, data, bytes); | 
 |  | 
 | 	req = kmalloc(buf_size, GFP_KERNEL); | 
 | 	if (!req) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	req->offset = cpu_to_le32(offset); | 
 | 	req->size = cpu_to_le32(bytes); | 
 | 	if (size == 1) { | 
 | 		memcpy(req->data, buf, count); | 
 | 	} else if (size == 2) { | 
 | 		u16 *buf_16 = buf; | 
 | 		int i; | 
 |  | 
 | 		for (i = 0; i < count; i++) | 
 | 			((__le16 *)req->data)[i] = cpu_to_le16(buf_16[i]); | 
 | 	} else { | 
 | 		u32 *buf_32 = buf; | 
 | 		int i; | 
 |  | 
 | 		for (i = 0; i < count; i++) | 
 | 			((__le32 *)req->data)[i] = cpu_to_le32(buf_32[i]); | 
 | 	} | 
 |  | 
 | 	err = scarlett2_usb(private->mixer, SCARLETT2_USB_SET_DATA, | 
 | 			    req, buf_size, NULL, 0); | 
 |  | 
 | 	kfree(req); | 
 | 	return err; | 
 | } | 
 |  | 
 | /* Send a SCARLETT2_USB_DATA_CMD command. | 
 |  * Configuration changes require activation with this after they have | 
 |  * been uploaded by a previous SCARLETT2_USB_SET_DATA. | 
 |  * The value for activate needed is determined by the configuration | 
 |  * item. | 
 |  */ | 
 | static int scarlett2_usb_activate_config( | 
 | 	struct usb_mixer_interface *mixer, int activate) | 
 | { | 
 | 	__le32 req; | 
 |  | 
 | 	req = cpu_to_le32(activate); | 
 | 	return scarlett2_usb(mixer, SCARLETT2_USB_DATA_CMD, | 
 | 			     &req, sizeof(req), NULL, 0); | 
 | } | 
 |  | 
 | /* Send USB messages to set a SCARLETT2_CONFIG_* parameter */ | 
 | static int scarlett2_usb_set_config( | 
 | 	struct usb_mixer_interface *mixer, | 
 | 	int config_item_num, int index, int value) | 
 | { | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	const struct scarlett2_config_set *config_set = private->config_set; | 
 | 	const struct scarlett2_config *config_item = | 
 | 		&config_set->items[config_item_num]; | 
 | 	int offset, size; | 
 | 	int err; | 
 |  | 
 | 	/* Check that the configuration item is present in the | 
 | 	 * configuration set used by this device | 
 | 	 */ | 
 | 	if (!config_item->offset) | 
 | 		return -EFAULT; | 
 |  | 
 | 	/* Write via the parameter buffer? */ | 
 | 	if (config_item->pbuf) { | 
 | 		if (!config_set->param_buf_addr) | 
 | 			return -EFAULT; | 
 |  | 
 | 		/* Place index in param_buf_addr + 1 */ | 
 | 		err = scarlett2_usb_set_data( | 
 | 			mixer, config_set->param_buf_addr + 1, 1, index); | 
 | 		if (err < 0) | 
 | 			return err; | 
 |  | 
 | 		/* Place value in param_buf_addr */ | 
 | 		err = scarlett2_usb_set_data( | 
 | 			mixer, config_set->param_buf_addr, 1, value); | 
 | 		if (err < 0) | 
 | 			return err; | 
 |  | 
 | 		/* Activate the write through the parameter buffer */ | 
 | 		return scarlett2_usb_activate_config( | 
 | 			mixer, config_item->activate); | 
 | 	} | 
 |  | 
 | 	/* Direct writes (not via the parameter buffer) need NVRAM | 
 | 	 * save and support bit-modification | 
 | 	 */ | 
 |  | 
 | 	/* Cancel any pending NVRAM save */ | 
 | 	cancel_delayed_work_sync(&private->work); | 
 |  | 
 | 	/* Convert config_item->size in bits to size in bytes and | 
 | 	 * calculate offset | 
 | 	 */ | 
 | 	if (config_item->size >= 8) { | 
 | 		size = config_item->size / 8; | 
 | 		offset = config_item->offset + index * size; | 
 |  | 
 | 	/* If updating a bit, retrieve the old value, set/clear the | 
 | 	 * bit as needed, and update value | 
 | 	 */ | 
 | 	} else { | 
 | 		u8 tmp; | 
 |  | 
 | 		size = 1; | 
 | 		offset = config_item->offset; | 
 |  | 
 | 		err = scarlett2_usb_get(mixer, offset, &tmp, 1); | 
 | 		if (err < 0) | 
 | 			return err; | 
 |  | 
 | 		if (value) | 
 | 			tmp |= (1 << index); | 
 | 		else | 
 | 			tmp &= ~(1 << index); | 
 |  | 
 | 		value = tmp; | 
 | 	} | 
 |  | 
 | 	/* Write the new value */ | 
 | 	err = scarlett2_usb_set_data(mixer, offset, size, value); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	/* Activate the change */ | 
 | 	err = scarlett2_usb_activate_config(mixer, config_item->activate); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	/* Interfaces with parameter buffer writes don't need a | 
 | 	 * separate save step | 
 | 	 */ | 
 | 	if (config_set->param_buf_addr) | 
 | 		return 0; | 
 |  | 
 | 	/* Schedule the change to be written to NVRAM */ | 
 | 	if (config_item->activate != SCARLETT2_USB_CONFIG_SAVE) | 
 | 		schedule_delayed_work(&private->work, msecs_to_jiffies(2000)); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* Send USB messages to set a SCARLETT2_CONFIG_* parameter with | 
 |  * multiple values | 
 |  */ | 
 | static int scarlett2_usb_set_config_buf( | 
 | 	struct usb_mixer_interface *mixer, | 
 | 	int config_item_num, int index, int count, void *buf) | 
 | { | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	const struct scarlett2_config_set *config_set = private->config_set; | 
 | 	const struct scarlett2_config *config_item = | 
 | 		&config_set->items[config_item_num]; | 
 | 	int offset, size; | 
 | 	int err; | 
 |  | 
 | 	/* Check that the configuration item is present in the | 
 | 	 * configuration set used by this device | 
 | 	 */ | 
 | 	if (!config_item->offset) | 
 | 		return -EFAULT; | 
 |  | 
 | 	/* Convert config_item->size in bits to size in bytes and | 
 | 	 * calculate offset | 
 | 	 */ | 
 | 	if (config_item->size >= 8) { | 
 | 		size = config_item->size / 8; | 
 | 		offset = config_item->offset + index * size; | 
 |  | 
 | 	/* Bit updates not supported */ | 
 | 	} else { | 
 | 		return -EFAULT; | 
 | 	} | 
 |  | 
 | 	/* Write the new values */ | 
 | 	err = scarlett2_usb_set_data_buf(mixer, offset, size, count, buf); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	/* Activate the change */ | 
 | 	return scarlett2_usb_activate_config(mixer, config_item->activate); | 
 | } | 
 |  | 
 | /* Send SCARLETT2_USB_DATA_CMD SCARLETT2_USB_CONFIG_SAVE */ | 
 | static void scarlett2_config_save(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	int err; | 
 |  | 
 | 	err = scarlett2_usb_activate_config(mixer, SCARLETT2_USB_CONFIG_SAVE); | 
 | 	if (err < 0) | 
 | 		usb_audio_err(mixer->chip, "config save failed: %d\n", err); | 
 | } | 
 |  | 
 | /* Delayed work to save config */ | 
 | static void scarlett2_config_save_work(struct work_struct *work) | 
 | { | 
 | 	struct scarlett2_data *private = | 
 | 		container_of(work, struct scarlett2_data, work.work); | 
 |  | 
 | 	scarlett2_config_save(private->mixer); | 
 | } | 
 |  | 
 | /* Send a USB message to get sync status; result placed in *sync */ | 
 | static int scarlett2_usb_get_sync_status( | 
 | 	struct usb_mixer_interface *mixer, | 
 | 	u8 *sync) | 
 | { | 
 | 	__le32 data; | 
 | 	int err; | 
 |  | 
 | 	err = scarlett2_usb(mixer, SCARLETT2_USB_GET_SYNC, | 
 | 			    NULL, 0, &data, sizeof(data)); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	*sync = !!data; | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* Return true if the device has a mixer that we can control */ | 
 | static int scarlett2_has_mixer(struct scarlett2_data *private) | 
 | { | 
 | 	return !!private->info->mux_assignment[0][0].count; | 
 | } | 
 |  | 
 | /* Map from mixer value to (db + 80) * 2 | 
 |  * (reverse of scarlett2_mixer_values[]) | 
 |  */ | 
 | static int scarlett2_mixer_value_to_db(int value) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < SCARLETT2_MIXER_VALUE_COUNT; i++) | 
 | 		if (scarlett2_mixer_values[i] >= value) | 
 | 			return i; | 
 | 	return SCARLETT2_MIXER_MAX_VALUE; | 
 | } | 
 |  | 
 | /* Send a USB message to get the volumes for all inputs of one mix | 
 |  * and put the values into private->mix[] | 
 |  */ | 
 | static int scarlett2_usb_get_mix(struct usb_mixer_interface *mixer, | 
 | 				 int mix_num) | 
 | { | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 |  | 
 | 	int num_mixer_in = private->num_mix_in; | 
 | 	int err, i, j; | 
 |  | 
 | 	struct { | 
 | 		__le16 mix_num; | 
 | 		__le16 count; | 
 | 	} __packed req; | 
 |  | 
 | 	__le16 data[SCARLETT2_INPUT_MIX_MAX]; | 
 |  | 
 | 	req.mix_num = cpu_to_le16(mix_num); | 
 | 	req.count = cpu_to_le16(num_mixer_in); | 
 |  | 
 | 	err = scarlett2_usb(mixer, SCARLETT2_USB_GET_MIX, | 
 | 			    &req, sizeof(req), | 
 | 			    data, num_mixer_in * sizeof(u16)); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	for (i = 0, j = mix_num * num_mixer_in; i < num_mixer_in; i++, j++) | 
 | 		private->mix[j] = scarlett2_mixer_value_to_db( | 
 | 			le16_to_cpu(data[i])); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* Send a USB message to set the volumes for all inputs of one mix | 
 |  * (values obtained from private->mix[]) | 
 |  */ | 
 | static int scarlett2_usb_set_mix(struct usb_mixer_interface *mixer, | 
 | 				 int mix_num) | 
 | { | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 |  | 
 | 	struct { | 
 | 		__le16 mix_num; | 
 | 		__le16 data[SCARLETT2_INPUT_MIX_MAX]; | 
 | 	} __packed req; | 
 |  | 
 | 	int i, j; | 
 | 	int num_mixer_in = private->num_mix_in; | 
 |  | 
 | 	req.mix_num = cpu_to_le16(mix_num); | 
 |  | 
 | 	for (i = 0, j = mix_num * num_mixer_in; i < num_mixer_in; i++, j++) | 
 | 		req.data[i] = cpu_to_le16( | 
 | 			scarlett2_mixer_values[private->mix[j]] | 
 | 		); | 
 |  | 
 | 	return scarlett2_usb(mixer, SCARLETT2_USB_SET_MIX, | 
 | 			     &req, (num_mixer_in + 1) * sizeof(u16), | 
 | 			     NULL, 0); | 
 | } | 
 |  | 
 | /* Convert a port number index (per info->port_count) to a hardware ID */ | 
 | static u32 scarlett2_mux_src_num_to_id( | 
 | 	const int port_count[][SCARLETT2_PORT_DIRNS], int num) | 
 | { | 
 | 	int port_type; | 
 |  | 
 | 	for (port_type = 0; | 
 | 	     port_type < SCARLETT2_PORT_TYPE_COUNT; | 
 | 	     port_type++) { | 
 | 		if (num < port_count[port_type][SCARLETT2_PORT_IN]) | 
 | 			return scarlett2_ports[port_type].id | num; | 
 | 		num -= port_count[port_type][SCARLETT2_PORT_IN]; | 
 | 	} | 
 |  | 
 | 	/* Oops */ | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* Convert a hardware ID to a port number index */ | 
 | static u32 scarlett2_mux_id_to_num( | 
 | 	const int port_count[][SCARLETT2_PORT_DIRNS], int direction, u32 id) | 
 | { | 
 | 	int port_type; | 
 | 	int port_num = 0; | 
 |  | 
 | 	for (port_type = 0; | 
 | 	     port_type < SCARLETT2_PORT_TYPE_COUNT; | 
 | 	     port_type++) { | 
 | 		int base = scarlett2_ports[port_type].id; | 
 | 		int count = port_count[port_type][direction]; | 
 |  | 
 | 		if (id >= base && id < base + count) | 
 | 			return port_num + id - base; | 
 | 		port_num += count; | 
 | 	} | 
 |  | 
 | 	/* Oops */ | 
 | 	return -1; | 
 | } | 
 |  | 
 | /* Convert one mux entry from the interface and load into private->mux[] */ | 
 | static void scarlett2_usb_populate_mux(struct scarlett2_data *private, | 
 | 				       u32 mux_entry) | 
 | { | 
 | 	const struct scarlett2_device_info *info = private->info; | 
 | 	const int (*port_count)[SCARLETT2_PORT_DIRNS] = info->port_count; | 
 |  | 
 | 	int dst_idx, src_idx; | 
 |  | 
 | 	dst_idx = scarlett2_mux_id_to_num(port_count, SCARLETT2_PORT_OUT, | 
 | 					  mux_entry & 0xFFF); | 
 | 	if (dst_idx < 0) | 
 | 		return; | 
 |  | 
 | 	if (dst_idx >= private->num_mux_dsts) { | 
 | 		usb_audio_err(private->mixer->chip, | 
 | 			"BUG: scarlett2_mux_id_to_num(%06x, OUT): %d >= %d", | 
 | 			mux_entry, dst_idx, private->num_mux_dsts); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	src_idx = scarlett2_mux_id_to_num(port_count, SCARLETT2_PORT_IN, | 
 | 					  mux_entry >> 12); | 
 | 	if (src_idx < 0) | 
 | 		return; | 
 |  | 
 | 	if (src_idx >= private->num_mux_srcs) { | 
 | 		usb_audio_err(private->mixer->chip, | 
 | 			"BUG: scarlett2_mux_id_to_num(%06x, IN): %d >= %d", | 
 | 			mux_entry, src_idx, private->num_mux_srcs); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	private->mux[dst_idx] = src_idx; | 
 | } | 
 |  | 
 | /* Update the meter level map | 
 |  * | 
 |  * The meter level data from the interface (SCARLETT2_USB_GET_METER | 
 |  * request) is returned in mux_assignment order, but to avoid exposing | 
 |  * that to userspace, scarlett2_meter_ctl_get() rearranges the data | 
 |  * into scarlett2_ports order using the meter_level_map[] array which | 
 |  * is set up by this function. | 
 |  * | 
 |  * In addition, the meter level data values returned from the | 
 |  * interface are invalid for destinations where: | 
 |  * | 
 |  * - the source is "Off"; therefore we set those values to zero (map | 
 |  *   value of 255) | 
 |  * | 
 |  * - the source is assigned to a previous (with respect to the | 
 |  *   mux_assignment order) destination; therefore we set those values | 
 |  *   to the value previously reported for that source | 
 |  */ | 
 | static void scarlett2_update_meter_level_map(struct scarlett2_data *private) | 
 | { | 
 | 	const struct scarlett2_device_info *info = private->info; | 
 | 	const struct scarlett2_meter_entry *entry; | 
 |  | 
 | 	/* sources already assigned to a destination | 
 | 	 * value is 255 for None, otherwise the value of i | 
 | 	 * (index into array returned by | 
 | 	 * scarlett2_usb_get_meter_levels()) | 
 | 	 */ | 
 | 	u8 seen_src[SCARLETT2_MAX_SRCS] = { 1 }; | 
 | 	u8 seen_src_value[SCARLETT2_MAX_SRCS] = { 255 }; | 
 |  | 
 | 	/* index in meter_map[] order */ | 
 | 	int i = 0; | 
 |  | 
 | 	/* go through the meter_map[] entries */ | 
 | 	for (entry = info->meter_map; | 
 | 	     entry->count; | 
 | 	     entry++) { | 
 |  | 
 | 		/* fill in each meter_level_map[] entry */ | 
 | 		int j, mux_idx; | 
 |  | 
 | 		for (j = 0, mux_idx = entry->start; | 
 | 		     j < entry->count; | 
 | 		     i++, j++, mux_idx++) { | 
 |  | 
 | 			/* convert mux_idx using line_out_unmap[] */ | 
 | 			int map_mux_idx = ( | 
 | 			    info->line_out_remap_enable && | 
 | 			    mux_idx < private->num_line_out | 
 | 			) ? info->line_out_unmap[mux_idx] | 
 | 			  : mux_idx; | 
 |  | 
 | 			/* check which source is connected, and if | 
 | 			 * that source is already connected elsewhere, | 
 | 			 * use that existing connection's destination | 
 | 			 * for this meter entry instead | 
 | 			 */ | 
 | 			int mux_src = private->mux[mux_idx]; | 
 |  | 
 | 			if (!seen_src[mux_src]) { | 
 | 				seen_src[mux_src] = 1; | 
 | 				seen_src_value[mux_src] = i; | 
 | 			} | 
 | 			private->meter_level_map[map_mux_idx] = | 
 | 				seen_src_value[mux_src]; | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 | /* Send USB message to get mux inputs and then populate private->mux[] */ | 
 | static int scarlett2_usb_get_mux(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	int count = private->num_mux_dsts; | 
 | 	int err, i; | 
 |  | 
 | 	struct { | 
 | 		__le16 num; | 
 | 		__le16 count; | 
 | 	} __packed req; | 
 |  | 
 | 	__le32 data[SCARLETT2_MUX_MAX]; | 
 |  | 
 | 	private->mux_updated = 0; | 
 |  | 
 | 	req.num = 0; | 
 | 	req.count = cpu_to_le16(count); | 
 |  | 
 | 	err = scarlett2_usb(mixer, SCARLETT2_USB_GET_MUX, | 
 | 			    &req, sizeof(req), | 
 | 			    data, count * sizeof(u32)); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	for (i = 0; i < count; i++) | 
 | 		scarlett2_usb_populate_mux(private, le32_to_cpu(data[i])); | 
 |  | 
 | 	scarlett2_update_meter_level_map(private); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* Send USB messages to set mux inputs */ | 
 | static int scarlett2_usb_set_mux(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	const struct scarlett2_device_info *info = private->info; | 
 | 	const int (*port_count)[SCARLETT2_PORT_DIRNS] = info->port_count; | 
 | 	int table; | 
 |  | 
 | 	struct { | 
 | 		__le16 pad; | 
 | 		__le16 num; | 
 | 		__le32 data[SCARLETT2_MUX_MAX]; | 
 | 	} __packed req; | 
 |  | 
 | 	req.pad = 0; | 
 |  | 
 | 	/* set mux settings for each rate */ | 
 | 	for (table = 0; table < SCARLETT2_MUX_TABLES; table++) { | 
 | 		const struct scarlett2_mux_entry *entry; | 
 |  | 
 | 		/* i counts over the output array */ | 
 | 		int i = 0, err; | 
 |  | 
 | 		req.num = cpu_to_le16(table); | 
 |  | 
 | 		/* loop through each entry */ | 
 | 		for (entry = info->mux_assignment[table]; | 
 | 		     entry->count; | 
 | 		     entry++) { | 
 | 			int j; | 
 | 			int port_type = entry->port_type; | 
 | 			int port_idx = entry->start; | 
 | 			int mux_idx = scarlett2_get_port_start_num(port_count, | 
 | 				SCARLETT2_PORT_OUT, port_type) + port_idx; | 
 | 			int dst_id = scarlett2_ports[port_type].id + port_idx; | 
 |  | 
 | 			/* Empty slots */ | 
 | 			if (!dst_id) { | 
 | 				for (j = 0; j < entry->count; j++) | 
 | 					req.data[i++] = 0; | 
 | 				continue; | 
 | 			} | 
 |  | 
 | 			/* Non-empty mux slots use the lower 12 bits | 
 | 			 * for the destination and next 12 bits for | 
 | 			 * the source | 
 | 			 */ | 
 | 			for (j = 0; j < entry->count; j++) { | 
 | 				int src_id = scarlett2_mux_src_num_to_id( | 
 | 					port_count, private->mux[mux_idx++]); | 
 | 				req.data[i++] = cpu_to_le32(dst_id | | 
 | 							    src_id << 12); | 
 | 				dst_id++; | 
 | 			} | 
 | 		} | 
 |  | 
 | 		err = scarlett2_usb(mixer, SCARLETT2_USB_SET_MUX, | 
 | 				    &req, (i + 1) * sizeof(u32), | 
 | 				    NULL, 0); | 
 | 		if (err < 0) | 
 | 			return err; | 
 | 	} | 
 |  | 
 | 	scarlett2_update_meter_level_map(private); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* Send USB message to get meter levels */ | 
 | static int scarlett2_usb_get_meter_levels(struct usb_mixer_interface *mixer, | 
 | 					  u16 num_meters, u16 *levels) | 
 | { | 
 | 	struct { | 
 | 		__le16 pad; | 
 | 		__le16 num_meters; | 
 | 		__le32 magic; | 
 | 	} __packed req; | 
 | 	__le32 resp[SCARLETT2_MAX_METERS]; | 
 | 	int i, err; | 
 |  | 
 | 	req.pad = 0; | 
 | 	req.num_meters = cpu_to_le16(num_meters); | 
 | 	req.magic = cpu_to_le32(SCARLETT2_USB_METER_LEVELS_GET_MAGIC); | 
 | 	err = scarlett2_usb(mixer, SCARLETT2_USB_GET_METER, | 
 | 			    &req, sizeof(req), resp, num_meters * sizeof(u32)); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	/* copy, convert to u16 */ | 
 | 	for (i = 0; i < num_meters; i++) | 
 | 		levels[i] = le32_to_cpu(resp[i]); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* For config items with mute=1, xor bits 0 & 1 together to get the | 
 |  * current/next state. This won't have any effect on values which are | 
 |  * only ever 0/1. | 
 |  */ | 
 | static uint8_t scarlett2_decode_muteable(uint8_t v) | 
 | { | 
 | 	return (v ^ (v >> 1)) & 1; | 
 | } | 
 |  | 
 | /*** Control Functions ***/ | 
 |  | 
 | /* helper function to create a new control */ | 
 | static int scarlett2_add_new_ctl(struct usb_mixer_interface *mixer, | 
 | 				 const struct snd_kcontrol_new *ncontrol, | 
 | 				 int index, int channels, const char *name, | 
 | 				 struct snd_kcontrol **kctl_return) | 
 | { | 
 | 	struct snd_kcontrol *kctl; | 
 | 	struct usb_mixer_elem_info *elem; | 
 | 	int err; | 
 |  | 
 | 	elem = kzalloc(sizeof(*elem), GFP_KERNEL); | 
 | 	if (!elem) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	/* We set USB_MIXER_BESPOKEN type, so that the core USB mixer code | 
 | 	 * ignores them for resume and other operations. | 
 | 	 * Also, the head.id field is set to 0, as we don't use this field. | 
 | 	 */ | 
 | 	elem->head.mixer = mixer; | 
 | 	elem->control = index; | 
 | 	elem->head.id = 0; | 
 | 	elem->channels = channels; | 
 | 	elem->val_type = USB_MIXER_BESPOKEN; | 
 |  | 
 | 	kctl = snd_ctl_new1(ncontrol, elem); | 
 | 	if (!kctl) { | 
 | 		kfree(elem); | 
 | 		return -ENOMEM; | 
 | 	} | 
 | 	kctl->private_free = snd_usb_mixer_elem_free; | 
 |  | 
 | 	strscpy(kctl->id.name, name, sizeof(kctl->id.name)); | 
 |  | 
 | 	err = snd_usb_mixer_add_control(&elem->head, kctl); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	if (kctl_return) | 
 | 		*kctl_return = kctl; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /*** Firmware Version Control ***/ | 
 |  | 
 | static int scarlett2_firmware_version_ctl_get( | 
 | 	struct snd_kcontrol *kctl, | 
 | 	struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct scarlett2_data *private = elem->head.mixer->private_data; | 
 |  | 
 | 	ucontrol->value.integer.value[0] = private->firmware_version; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int scarlett2_firmware_version_ctl_info( | 
 | 	struct snd_kcontrol *kctl, | 
 | 	struct snd_ctl_elem_info *uinfo) | 
 | { | 
 | 	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; | 
 | 	uinfo->count = 1; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct snd_kcontrol_new scarlett2_firmware_version_ctl = { | 
 | 	.iface = SNDRV_CTL_ELEM_IFACE_CARD, | 
 | 	.access = SNDRV_CTL_ELEM_ACCESS_READ, | 
 | 	.name = "", | 
 | 	.info = scarlett2_firmware_version_ctl_info, | 
 | 	.get  = scarlett2_firmware_version_ctl_get | 
 | }; | 
 |  | 
 | static int scarlett2_add_firmware_version_ctl( | 
 | 	struct usb_mixer_interface *mixer) | 
 | { | 
 | 	return scarlett2_add_new_ctl(mixer, &scarlett2_firmware_version_ctl, | 
 | 				     0, 0, "Firmware Version", NULL); | 
 | } | 
 |  | 
 | /*** Minimum Firmware Version Control ***/ | 
 |  | 
 | static int scarlett2_min_firmware_version_ctl_get( | 
 | 	struct snd_kcontrol *kctl, | 
 | 	struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct scarlett2_data *private = elem->head.mixer->private_data; | 
 |  | 
 | 	ucontrol->value.integer.value[0] = private->info->min_firmware_version; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int scarlett2_min_firmware_version_ctl_info( | 
 | 	struct snd_kcontrol *kctl, | 
 | 	struct snd_ctl_elem_info *uinfo) | 
 | { | 
 | 	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; | 
 | 	uinfo->count = 1; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct snd_kcontrol_new scarlett2_min_firmware_version_ctl = { | 
 | 	.iface = SNDRV_CTL_ELEM_IFACE_CARD, | 
 | 	.access = SNDRV_CTL_ELEM_ACCESS_READ, | 
 | 	.name = "", | 
 | 	.info = scarlett2_min_firmware_version_ctl_info, | 
 | 	.get  = scarlett2_min_firmware_version_ctl_get | 
 | }; | 
 |  | 
 | static int scarlett2_add_min_firmware_version_ctl( | 
 | 	struct usb_mixer_interface *mixer) | 
 | { | 
 | 	return scarlett2_add_new_ctl(mixer, &scarlett2_min_firmware_version_ctl, | 
 | 				     0, 0, "Minimum Firmware Version", NULL); | 
 | } | 
 |  | 
 | /*** Sync Control ***/ | 
 |  | 
 | /* Update sync control after receiving notification that the status | 
 |  * has changed | 
 |  */ | 
 | static int scarlett2_update_sync(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 |  | 
 | 	private->sync_updated = 0; | 
 | 	return scarlett2_usb_get_sync_status(mixer, &private->sync); | 
 | } | 
 |  | 
 | static int scarlett2_sync_ctl_info(struct snd_kcontrol *kctl, | 
 | 				   struct snd_ctl_elem_info *uinfo) | 
 | { | 
 | 	static const char *texts[2] = { | 
 | 		"Unlocked", "Locked" | 
 | 	}; | 
 | 	return snd_ctl_enum_info(uinfo, 1, 2, texts); | 
 | } | 
 |  | 
 | static int scarlett2_sync_ctl_get(struct snd_kcontrol *kctl, | 
 | 				  struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct usb_mixer_interface *mixer = elem->head.mixer; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	int err = 0; | 
 |  | 
 | 	mutex_lock(&private->data_mutex); | 
 |  | 
 | 	if (private->hwdep_in_use) { | 
 | 		err = -EBUSY; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	if (private->sync_updated) { | 
 | 		err = scarlett2_update_sync(mixer); | 
 | 		if (err < 0) | 
 | 			goto unlock; | 
 | 	} | 
 | 	ucontrol->value.enumerated.item[0] = private->sync; | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&private->data_mutex); | 
 | 	return err; | 
 | } | 
 |  | 
 | static const struct snd_kcontrol_new scarlett2_sync_ctl = { | 
 | 	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, | 
 | 	.access = SNDRV_CTL_ELEM_ACCESS_READ, | 
 | 	.name = "", | 
 | 	.info = scarlett2_sync_ctl_info, | 
 | 	.get  = scarlett2_sync_ctl_get | 
 | }; | 
 |  | 
 | static int scarlett2_add_sync_ctl(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 |  | 
 | 	/* devices without a mixer also don't support reporting sync status */ | 
 | 	if (!scarlett2_has_mixer(private)) | 
 | 		return 0; | 
 |  | 
 | 	return scarlett2_add_new_ctl(mixer, &scarlett2_sync_ctl, | 
 | 				     0, 1, "Sync Status", &private->sync_ctl); | 
 | } | 
 |  | 
 | /*** Autogain Switch and Status Controls ***/ | 
 |  | 
 | /* Forward declarations as phantom power and autogain can disable each other */ | 
 | static int scarlett2_check_input_phantom_updated(struct usb_mixer_interface *); | 
 | static int scarlett2_phantom_is_switching(struct scarlett2_data *, int); | 
 |  | 
 | /* Set the access mode of a control to read-only (val = 0) or | 
 |  * read-write (val = 1). | 
 |  */ | 
 | static void scarlett2_set_ctl_access(struct snd_kcontrol *kctl, int val) | 
 | { | 
 | 	if (val) | 
 | 		kctl->vd[0].access |= SNDRV_CTL_ELEM_ACCESS_WRITE; | 
 | 	else | 
 | 		kctl->vd[0].access &= ~SNDRV_CTL_ELEM_ACCESS_WRITE; | 
 | } | 
 |  | 
 | /* Check if autogain is running on any input */ | 
 | static int scarlett2_autogain_is_running(struct scarlett2_data *private) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	/* autogain_status[] is 0 if autogain is running */ | 
 | 	for (i = 0; i < private->info->gain_input_count; i++) | 
 | 		if (!private->autogain_status[i]) | 
 | 			return 1; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int scarlett2_update_autogain(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	const struct scarlett2_device_info *info = private->info; | 
 | 	int err, i; | 
 | 	u8 raw_autogain_status[SCARLETT2_INPUT_GAIN_MAX]; | 
 | 	s8 ag_target_values[SCARLETT2_AG_TARGET_COUNT]; | 
 |  | 
 | 	private->autogain_updated = 0; | 
 |  | 
 | 	if (!info->gain_input_count) | 
 | 		return 0; | 
 |  | 
 | 	err = scarlett2_usb_get_config( | 
 | 		mixer, SCARLETT2_CONFIG_AUTOGAIN_SWITCH, | 
 | 		info->gain_input_count, private->autogain_switch); | 
 | 	if (err < 0) | 
 | 		return err; | 
 | 	err = scarlett2_usb_get_config( | 
 | 		mixer, SCARLETT2_CONFIG_AUTOGAIN_STATUS, | 
 | 		info->gain_input_count, raw_autogain_status); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	/* Translate autogain_switch and raw_autogain_status into | 
 | 	 * autogain_status. | 
 | 	 * | 
 | 	 * When autogain_switch[] is set, the status is the first | 
 | 	 * element in scarlett2_autogain_status_texts[] (Running). The | 
 | 	 * subsequent elements correspond to the status value from the | 
 | 	 * device (raw_autogain_status[]) + 1. The last element is | 
 | 	 * "Invalid", in case the device reports a status outside the | 
 | 	 * range of scarlett2_autogain_status_texts[]. | 
 | 	 */ | 
 | 	for (i = 0; i < info->gain_input_count; i++) | 
 | 		if (private->autogain_switch[i]) | 
 | 			private->autogain_status[i] = 0; | 
 | 		else if (raw_autogain_status[i] < | 
 | 				private->num_autogain_status_texts - 1) | 
 | 			private->autogain_status[i] = | 
 | 				raw_autogain_status[i] + 1; | 
 | 		else | 
 | 			private->autogain_status[i] = | 
 | 				private->num_autogain_status_texts - 1; | 
 |  | 
 |  | 
 | 	for (i = 0; i < SCARLETT2_AG_TARGET_COUNT; i++) | 
 | 		if (scarlett2_has_config_item(private, | 
 | 					      scarlett2_ag_target_configs[i])) { | 
 | 			err = scarlett2_usb_get_config( | 
 | 				mixer, scarlett2_ag_target_configs[i], | 
 | 				1, &ag_target_values[i]); | 
 | 			if (err < 0) | 
 | 				return err; | 
 | 		} | 
 |  | 
 | 	/* convert from negative dBFS as used by the device */ | 
 | 	for (i = 0; i < SCARLETT2_AG_TARGET_COUNT; i++) | 
 | 		private->ag_targets[i] = -ag_target_values[i]; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* Update access mode for controls affected by autogain */ | 
 | static void scarlett2_autogain_update_access(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	const struct scarlett2_device_info *info = private->info; | 
 | 	int val = !scarlett2_autogain_is_running(private); | 
 | 	int i; | 
 |  | 
 | 	if (scarlett2_has_config_item(private, | 
 | 				      SCARLETT2_CONFIG_INPUT_SELECT_SWITCH)) | 
 | 		scarlett2_set_ctl_access(private->input_select_ctl, val); | 
 | 	if (scarlett2_has_config_item(private, | 
 | 				      SCARLETT2_CONFIG_INPUT_LINK_SWITCH)) | 
 | 		for (i = 0; i < info->gain_input_count; i++) | 
 | 			scarlett2_set_ctl_access(private->input_link_ctls[i], | 
 | 						 val); | 
 | 	for (i = 0; i < info->gain_input_count; i++) | 
 | 		scarlett2_set_ctl_access(private->input_gain_ctls[i], val); | 
 | 	for (i = 0; i < info->safe_input_count; i++) | 
 | 		scarlett2_set_ctl_access(private->safe_ctls[i], val); | 
 | 	for (i = 0; i < info->level_input_count; i++) | 
 | 		scarlett2_set_ctl_access(private->level_ctls[i], val); | 
 | 	for (i = 0; i < info->air_input_count; i++) | 
 | 		scarlett2_set_ctl_access(private->air_ctls[i], val); | 
 | 	for (i = 0; i < info->mute_input_count; i++) | 
 | 		scarlett2_set_ctl_access(private->input_mute_ctls[i], val); | 
 | 	for (i = 0; i < info->phantom_count; i++) | 
 | 		scarlett2_set_ctl_access(private->phantom_ctls[i], val); | 
 | 	for (i = 0; i < info->dsp_input_count; i++) | 
 | 		scarlett2_set_ctl_access(private->dsp_ctls[i], val); | 
 |  | 
 | 	for (i = 0; i < SCARLETT2_AG_TARGET_COUNT; i++) | 
 | 		if (scarlett2_has_config_item(private, | 
 | 					      scarlett2_ag_target_configs[i])) | 
 | 			scarlett2_set_ctl_access( | 
 | 				private->ag_target_ctls[i], val); | 
 | } | 
 |  | 
 | /* Notify of access mode change for all controls read-only while | 
 |  * autogain runs. | 
 |  */ | 
 | static void scarlett2_autogain_notify_access(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct snd_card *card = mixer->chip->card; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	const struct scarlett2_device_info *info = private->info; | 
 | 	int i; | 
 |  | 
 | 	if (scarlett2_has_config_item(private, | 
 | 				      SCARLETT2_CONFIG_INPUT_SELECT_SWITCH)) | 
 | 		snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_INFO, | 
 | 			       &private->input_select_ctl->id); | 
 | 	if (scarlett2_has_config_item(private, | 
 | 				      SCARLETT2_CONFIG_INPUT_LINK_SWITCH)) | 
 | 		for (i = 0; i < info->gain_input_count; i++) | 
 | 			snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_INFO, | 
 | 				       &private->input_link_ctls[i]->id); | 
 | 	for (i = 0; i < info->gain_input_count; i++) | 
 | 		snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_INFO, | 
 | 			       &private->input_gain_ctls[i]->id); | 
 | 	for (i = 0; i < info->safe_input_count; i++) | 
 | 		snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_INFO, | 
 | 			       &private->safe_ctls[i]->id); | 
 | 	for (i = 0; i < info->level_input_count; i++) | 
 | 		snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_INFO, | 
 | 			       &private->level_ctls[i]->id); | 
 | 	for (i = 0; i < info->air_input_count; i++) | 
 | 		snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_INFO, | 
 | 			       &private->air_ctls[i]->id); | 
 | 	for (i = 0; i < info->dsp_input_count; i++) | 
 | 		snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_INFO, | 
 | 			       &private->dsp_ctls[i]->id); | 
 | 	for (i = 0; i < info->mute_input_count; i++) | 
 | 		snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_INFO, | 
 | 			       &private->input_mute_ctls[i]->id); | 
 | 	for (i = 0; i < info->phantom_count; i++) | 
 | 		snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_INFO, | 
 | 			       &private->phantom_ctls[i]->id); | 
 |  | 
 | 	for (i = 0; i < SCARLETT2_AG_TARGET_COUNT; i++) | 
 | 		if (scarlett2_has_config_item(private, | 
 | 					      scarlett2_ag_target_configs[i])) | 
 | 			snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_INFO, | 
 | 				       &private->ag_target_ctls[i]->id); | 
 | } | 
 |  | 
 | /* Call scarlett2_update_autogain() and | 
 |  * scarlett2_autogain_update_access() if autogain_updated is set. | 
 |  */ | 
 | static int scarlett2_check_autogain_updated( | 
 | 	struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	int err; | 
 |  | 
 | 	if (!private->autogain_updated) | 
 | 		return 0; | 
 |  | 
 | 	err = scarlett2_update_autogain(mixer); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	scarlett2_autogain_update_access(mixer); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* If autogain_updated is set when a *_ctl_put() function for a | 
 |  * control that is meant to be read-only while autogain is running, | 
 |  * update the autogain status and access mode of affected controls. | 
 |  * Return -EPERM if autogain is running. | 
 |  */ | 
 | static int scarlett2_check_put_during_autogain( | 
 | 	struct usb_mixer_interface *mixer) | 
 | { | 
 | 	int err = scarlett2_check_autogain_updated(mixer); | 
 |  | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	if (scarlett2_autogain_is_running(mixer->private_data)) | 
 | 		return -EPERM; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int scarlett2_autogain_switch_ctl_info( | 
 | 	struct snd_kcontrol *kctl, struct snd_ctl_elem_info *uinfo) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct usb_mixer_interface *mixer = elem->head.mixer; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	int err; | 
 |  | 
 | 	mutex_lock(&private->data_mutex); | 
 |  | 
 | 	err = scarlett2_check_input_phantom_updated(mixer); | 
 | 	if (err < 0) | 
 | 		goto unlock; | 
 |  | 
 | 	err = snd_ctl_boolean_mono_info(kctl, uinfo); | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&private->data_mutex); | 
 | 	return err; | 
 | } | 
 |  | 
 | static int scarlett2_autogain_switch_ctl_get( | 
 | 	struct snd_kcontrol *kctl, struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct usb_mixer_interface *mixer = elem->head.mixer; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	int err; | 
 |  | 
 | 	mutex_lock(&private->data_mutex); | 
 |  | 
 | 	if (private->hwdep_in_use) { | 
 | 		err = -EBUSY; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	err = scarlett2_check_autogain_updated(mixer); | 
 | 	if (err < 0) | 
 | 		goto unlock; | 
 |  | 
 | 	ucontrol->value.enumerated.item[0] = | 
 | 		private->autogain_switch[elem->control]; | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&private->data_mutex); | 
 | 	return err; | 
 | } | 
 |  | 
 | static int scarlett2_autogain_status_ctl_get( | 
 | 	struct snd_kcontrol *kctl, struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct usb_mixer_interface *mixer = elem->head.mixer; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	int err; | 
 |  | 
 | 	mutex_lock(&private->data_mutex); | 
 |  | 
 | 	if (private->hwdep_in_use) { | 
 | 		err = -EBUSY; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	err = scarlett2_check_autogain_updated(mixer); | 
 | 	if (err < 0) | 
 | 		goto unlock; | 
 |  | 
 | 	ucontrol->value.enumerated.item[0] = | 
 | 		private->autogain_status[elem->control]; | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&private->data_mutex); | 
 | 	return err; | 
 | } | 
 |  | 
 | static int scarlett2_autogain_switch_ctl_put( | 
 | 	struct snd_kcontrol *kctl, struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct usb_mixer_interface *mixer = elem->head.mixer; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 |  | 
 | 	int index = elem->control; | 
 | 	int oval, val, err; | 
 |  | 
 | 	mutex_lock(&private->data_mutex); | 
 |  | 
 | 	if (private->hwdep_in_use) { | 
 | 		err = -EBUSY; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	err = scarlett2_check_input_phantom_updated(mixer); | 
 | 	if (err < 0) | 
 | 		goto unlock; | 
 |  | 
 | 	if (scarlett2_phantom_is_switching(private, index)) { | 
 | 		err = -EPERM; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	oval = private->autogain_switch[index]; | 
 | 	val = !!ucontrol->value.integer.value[0]; | 
 |  | 
 | 	if (oval == val) | 
 | 		goto unlock; | 
 |  | 
 | 	private->autogain_switch[index] = val; | 
 |  | 
 | 	/* Send switch change to the device */ | 
 | 	err = scarlett2_usb_set_config( | 
 | 		mixer, SCARLETT2_CONFIG_AUTOGAIN_SWITCH, index, val); | 
 | 	if (err == 0) | 
 | 		err = 1; | 
 |  | 
 | 	scarlett2_autogain_update_access(mixer); | 
 | 	scarlett2_autogain_notify_access(mixer); | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&private->data_mutex); | 
 | 	return err; | 
 | } | 
 |  | 
 | static int scarlett2_autogain_status_ctl_info( | 
 | 	struct snd_kcontrol *kctl, struct snd_ctl_elem_info *uinfo) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct scarlett2_data *private = elem->head.mixer->private_data; | 
 |  | 
 | 	return snd_ctl_enum_info( | 
 | 		uinfo, 1, | 
 | 		private->num_autogain_status_texts, | 
 | 		private->config_set->autogain_status_texts); | 
 | } | 
 |  | 
 | static const struct snd_kcontrol_new scarlett2_autogain_switch_ctl = { | 
 | 	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, | 
 | 	.name = "", | 
 | 	.info = scarlett2_autogain_switch_ctl_info, | 
 | 	.get  = scarlett2_autogain_switch_ctl_get, | 
 | 	.put  = scarlett2_autogain_switch_ctl_put | 
 | }; | 
 |  | 
 | static const struct snd_kcontrol_new scarlett2_autogain_status_ctl = { | 
 | 	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, | 
 | 	.access = SNDRV_CTL_ELEM_ACCESS_READ, | 
 | 	.name = "", | 
 | 	.info = scarlett2_autogain_status_ctl_info, | 
 | 	.get  = scarlett2_autogain_status_ctl_get, | 
 | }; | 
 |  | 
 | /*** Autogain Target Controls ***/ | 
 |  | 
 | static int scarlett2_ag_target_ctl_info( | 
 | 	struct snd_kcontrol *kctl, struct snd_ctl_elem_info *uinfo) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct usb_mixer_interface *mixer = elem->head.mixer; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	int err; | 
 |  | 
 | 	mutex_lock(&private->data_mutex); | 
 |  | 
 | 	if (private->hwdep_in_use) { | 
 | 		err = -EBUSY; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	err = scarlett2_check_autogain_updated(mixer); | 
 | 	if (err < 0) | 
 | 		goto unlock; | 
 |  | 
 | 	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; | 
 | 	uinfo->count = 1; | 
 | 	uinfo->value.integer.min = SCARLETT2_AG_TARGET_MIN; | 
 | 	uinfo->value.integer.max = 0; | 
 | 	uinfo->value.integer.step = 1; | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&private->data_mutex); | 
 | 	return err; | 
 | } | 
 |  | 
 | static int scarlett2_ag_target_ctl_get( | 
 | 	struct snd_kcontrol *kctl, struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct usb_mixer_interface *mixer = elem->head.mixer; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	int err = 0; | 
 |  | 
 | 	mutex_lock(&private->data_mutex); | 
 |  | 
 | 	if (private->hwdep_in_use) { | 
 | 		err = -EBUSY; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	if (private->autogain_updated) { | 
 | 		err = scarlett2_update_autogain(mixer); | 
 | 		if (err < 0) | 
 | 			goto unlock; | 
 | 	} | 
 |  | 
 | 	ucontrol->value.integer.value[0] = private->ag_targets[elem->control]; | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&private->data_mutex); | 
 | 	return err; | 
 | } | 
 |  | 
 | static int scarlett2_ag_target_ctl_put( | 
 | 	struct snd_kcontrol *kctl, struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct usb_mixer_interface *mixer = elem->head.mixer; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 |  | 
 | 	int index = elem->control; | 
 | 	int oval, val, err; | 
 |  | 
 | 	mutex_lock(&private->data_mutex); | 
 |  | 
 | 	if (private->hwdep_in_use) { | 
 | 		err = -EBUSY; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	err = scarlett2_check_put_during_autogain(mixer); | 
 | 	if (err < 0) | 
 | 		goto unlock; | 
 |  | 
 | 	oval = private->ag_targets[index]; | 
 | 	val = clamp(ucontrol->value.integer.value[0], | 
 | 		    (long)SCARLETT2_AG_TARGET_MIN, 0L); | 
 |  | 
 | 	if (oval == val) | 
 | 		goto unlock; | 
 |  | 
 | 	private->ag_targets[index] = val; | 
 |  | 
 | 	/* Send new value to the device */ | 
 | 	err = scarlett2_usb_set_config( | 
 | 		mixer, scarlett2_ag_target_configs[index], 1, -val); | 
 | 	if (err == 0) | 
 | 		err = 1; | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&private->data_mutex); | 
 | 	return err; | 
 | } | 
 |  | 
 | static const DECLARE_TLV_DB_MINMAX( | 
 | 	db_scale_ag_target, SCARLETT2_AG_TARGET_MIN * 100, 0 | 
 | ); | 
 |  | 
 | static const struct snd_kcontrol_new scarlett2_ag_target_ctl = { | 
 | 	.iface = SNDRV_CTL_ELEM_IFACE_CARD, | 
 | 	.access = SNDRV_CTL_ELEM_ACCESS_READWRITE | | 
 | 		  SNDRV_CTL_ELEM_ACCESS_TLV_READ, | 
 | 	.name = "", | 
 | 	.info = scarlett2_ag_target_ctl_info, | 
 | 	.get  = scarlett2_ag_target_ctl_get, | 
 | 	.put  = scarlett2_ag_target_ctl_put, | 
 | 	.tlv = { .p = db_scale_ag_target } | 
 | }; | 
 |  | 
 | /*** Input Select Control ***/ | 
 |  | 
 | static int scarlett2_update_input_select(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	const struct scarlett2_device_info *info = private->info; | 
 | 	int link_count = info->gain_input_count; | 
 | 	int err; | 
 |  | 
 | 	private->input_select_updated = 0; | 
 |  | 
 | 	if (!scarlett2_has_config_item(private, | 
 | 				       SCARLETT2_CONFIG_INPUT_SELECT_SWITCH) || | 
 | 	    !link_count) | 
 | 		return 0; | 
 |  | 
 | 	err = scarlett2_usb_get_config( | 
 | 		mixer, SCARLETT2_CONFIG_INPUT_SELECT_SWITCH, | 
 | 		1, &private->input_select_switch); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	err = scarlett2_usb_get_config( | 
 | 		mixer, SCARLETT2_CONFIG_INPUT_LINK_SWITCH, | 
 | 		link_count, private->input_link_switch); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int scarlett2_input_select_ctl_get( | 
 | 	struct snd_kcontrol *kctl, struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct usb_mixer_interface *mixer = elem->head.mixer; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	int err = 0; | 
 |  | 
 | 	mutex_lock(&private->data_mutex); | 
 |  | 
 | 	if (private->hwdep_in_use) { | 
 | 		err = -EBUSY; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	if (private->input_select_updated) { | 
 | 		err = scarlett2_update_input_select(mixer); | 
 | 		if (err < 0) | 
 | 			goto unlock; | 
 | 	} | 
 | 	ucontrol->value.enumerated.item[0] = private->input_select_switch; | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&private->data_mutex); | 
 | 	return err; | 
 | } | 
 |  | 
 | static int scarlett2_input_select_ctl_put( | 
 | 	struct snd_kcontrol *kctl, struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct usb_mixer_interface *mixer = elem->head.mixer; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	const struct scarlett2_device_info *info = private->info; | 
 |  | 
 | 	int oval, val, err; | 
 |  | 
 | 	mutex_lock(&private->data_mutex); | 
 |  | 
 | 	if (private->hwdep_in_use) { | 
 | 		err = -EBUSY; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	err = scarlett2_check_put_during_autogain(mixer); | 
 | 	if (err < 0) | 
 | 		goto unlock; | 
 |  | 
 | 	oval = private->input_select_switch; | 
 | 	val = ucontrol->value.integer.value[0]; | 
 |  | 
 | 	if (val < 0) | 
 | 		val = 0; | 
 | 	else if (val >= info->gain_input_count) | 
 | 		val = info->gain_input_count - 1; | 
 |  | 
 | 	if (oval == val) | 
 | 		goto unlock; | 
 |  | 
 | 	private->input_select_switch = val; | 
 |  | 
 | 	/* Send new value to the device */ | 
 | 	err = scarlett2_usb_set_config( | 
 | 		mixer, SCARLETT2_CONFIG_INPUT_SELECT_SWITCH, | 
 | 		0, val); | 
 | 	if (err == 0) | 
 | 		err = 1; | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&private->data_mutex); | 
 | 	return err; | 
 | } | 
 |  | 
 | static int scarlett2_input_select_ctl_info( | 
 | 	struct snd_kcontrol *kctl, struct snd_ctl_elem_info *uinfo) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct usb_mixer_interface *mixer = elem->head.mixer; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 |  | 
 | 	int inputs = private->info->gain_input_count; | 
 | 	int i, err; | 
 | 	char **values = kcalloc(inputs, sizeof(char *), GFP_KERNEL); | 
 |  | 
 | 	if (!values) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	mutex_lock(&private->data_mutex); | 
 |  | 
 | 	if (private->hwdep_in_use) { | 
 | 		err = -EBUSY; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	err = scarlett2_check_autogain_updated(mixer); | 
 | 	if (err < 0) | 
 | 		goto unlock; | 
 |  | 
 | 	/* Loop through each input */ | 
 | 	for (i = 0; i < inputs; i++) { | 
 | 		values[i] = kasprintf(GFP_KERNEL, "Input %d", i + 1); | 
 | 		if (!values[i]) { | 
 | 			err = -ENOMEM; | 
 | 			goto unlock; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	err = snd_ctl_enum_info(uinfo, 1, i, | 
 | 				(const char * const *)values); | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&private->data_mutex); | 
 |  | 
 | 	for (i = 0; i < inputs; i++) | 
 | 		kfree(values[i]); | 
 | 	kfree(values); | 
 |  | 
 | 	return err; | 
 | } | 
 |  | 
 | static const struct snd_kcontrol_new scarlett2_input_select_ctl = { | 
 | 	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, | 
 | 	.name = "", | 
 | 	.info = scarlett2_input_select_ctl_info, | 
 | 	.get  = scarlett2_input_select_ctl_get, | 
 | 	.put  = scarlett2_input_select_ctl_put, | 
 | }; | 
 |  | 
 | /*** Input Link Switch Controls ***/ | 
 |  | 
 | /* snd_ctl_boolean_mono_info() with autogain-updated check | 
 |  * (for controls that are read-only while autogain is running) | 
 |  */ | 
 | static int scarlett2_autogain_disables_ctl_info(struct snd_kcontrol *kctl, | 
 | 						struct snd_ctl_elem_info *uinfo) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct usb_mixer_interface *mixer = elem->head.mixer; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	int err; | 
 |  | 
 | 	mutex_lock(&private->data_mutex); | 
 |  | 
 | 	if (private->hwdep_in_use) { | 
 | 		err = -EBUSY; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	err = scarlett2_check_autogain_updated(mixer); | 
 | 	if (err < 0) | 
 | 		goto unlock; | 
 |  | 
 | 	err = snd_ctl_boolean_mono_info(kctl, uinfo); | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&private->data_mutex); | 
 | 	return err; | 
 | } | 
 |  | 
 | static int scarlett2_input_link_ctl_get( | 
 | 	struct snd_kcontrol *kctl, struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct usb_mixer_interface *mixer = elem->head.mixer; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	int err = 0; | 
 |  | 
 | 	mutex_lock(&private->data_mutex); | 
 |  | 
 | 	if (private->hwdep_in_use) { | 
 | 		err = -EBUSY; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	if (private->input_select_updated) { | 
 | 		err = scarlett2_update_input_select(mixer); | 
 | 		if (err < 0) | 
 | 			goto unlock; | 
 | 	} | 
 | 	ucontrol->value.enumerated.item[0] = | 
 | 		private->input_link_switch[elem->control]; | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&private->data_mutex); | 
 | 	return err; | 
 | } | 
 |  | 
 | static int scarlett2_input_link_ctl_put( | 
 | 	struct snd_kcontrol *kctl, struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct usb_mixer_interface *mixer = elem->head.mixer; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 |  | 
 | 	int index = elem->control; | 
 | 	int oval, val, err; | 
 |  | 
 | 	mutex_lock(&private->data_mutex); | 
 |  | 
 | 	if (private->hwdep_in_use) { | 
 | 		err = -EBUSY; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	err = scarlett2_check_put_during_autogain(mixer); | 
 | 	if (err < 0) | 
 | 		goto unlock; | 
 |  | 
 | 	oval = private->input_link_switch[index]; | 
 | 	val = !!ucontrol->value.integer.value[0]; | 
 |  | 
 | 	if (oval == val) | 
 | 		goto unlock; | 
 |  | 
 | 	private->input_link_switch[index] = val; | 
 |  | 
 | 	err = scarlett2_usb_set_config( | 
 | 		mixer, SCARLETT2_CONFIG_INPUT_LINK_SWITCH, index, val); | 
 | 	if (err == 0) | 
 | 		err = 1; | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&private->data_mutex); | 
 | 	return err; | 
 | } | 
 |  | 
 | static const struct snd_kcontrol_new scarlett2_input_link_ctl = { | 
 | 	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, | 
 | 	.name = "", | 
 | 	.info = scarlett2_autogain_disables_ctl_info, | 
 | 	.get  = scarlett2_input_link_ctl_get, | 
 | 	.put  = scarlett2_input_link_ctl_put | 
 | }; | 
 |  | 
 | /*** Input Gain Controls ***/ | 
 |  | 
 | static int scarlett2_update_input_gain(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	const struct scarlett2_device_info *info = private->info; | 
 |  | 
 | 	private->input_gain_updated = 0; | 
 |  | 
 | 	if (!info->gain_input_count) | 
 | 		return 0; | 
 |  | 
 | 	return scarlett2_usb_get_config( | 
 | 		mixer, SCARLETT2_CONFIG_INPUT_GAIN, | 
 | 		info->gain_input_count, private->gain); | 
 | } | 
 |  | 
 | static int scarlett2_input_gain_ctl_info(struct snd_kcontrol *kctl, | 
 | 					 struct snd_ctl_elem_info *uinfo) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct usb_mixer_interface *mixer = elem->head.mixer; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	int err; | 
 |  | 
 | 	mutex_lock(&private->data_mutex); | 
 |  | 
 | 	if (private->hwdep_in_use) { | 
 | 		err = -EBUSY; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	err = scarlett2_check_autogain_updated(mixer); | 
 | 	if (err < 0) | 
 | 		goto unlock; | 
 |  | 
 | 	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; | 
 | 	uinfo->count = elem->channels; | 
 | 	uinfo->value.integer.min = 0; | 
 | 	uinfo->value.integer.max = SCARLETT2_MAX_GAIN_VALUE; | 
 | 	uinfo->value.integer.step = 1; | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&private->data_mutex); | 
 | 	return err; | 
 | } | 
 |  | 
 | static int scarlett2_input_gain_ctl_get(struct snd_kcontrol *kctl, | 
 | 					struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct usb_mixer_interface *mixer = elem->head.mixer; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	int err = 0; | 
 |  | 
 | 	mutex_lock(&private->data_mutex); | 
 |  | 
 | 	if (private->hwdep_in_use) { | 
 | 		err = -EBUSY; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	if (private->input_gain_updated) { | 
 | 		err = scarlett2_update_input_gain(mixer); | 
 | 		if (err < 0) | 
 | 			goto unlock; | 
 | 	} | 
 | 	ucontrol->value.integer.value[0] = | 
 | 		private->gain[elem->control]; | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&private->data_mutex); | 
 | 	return err; | 
 | } | 
 |  | 
 | static int scarlett2_input_gain_ctl_put(struct snd_kcontrol *kctl, | 
 | 					struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct usb_mixer_interface *mixer = elem->head.mixer; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 |  | 
 | 	int index = elem->control; | 
 | 	int oval, val, err; | 
 |  | 
 | 	mutex_lock(&private->data_mutex); | 
 |  | 
 | 	if (private->hwdep_in_use) { | 
 | 		err = -EBUSY; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	err = scarlett2_check_put_during_autogain(mixer); | 
 | 	if (err < 0) | 
 | 		goto unlock; | 
 |  | 
 | 	oval = private->gain[index]; | 
 | 	val = ucontrol->value.integer.value[0]; | 
 |  | 
 | 	if (oval == val) | 
 | 		goto unlock; | 
 |  | 
 | 	private->gain[index] = val; | 
 |  | 
 | 	/* Send gain change to the device */ | 
 | 	err = scarlett2_usb_set_config(mixer, SCARLETT2_CONFIG_INPUT_GAIN, | 
 | 				       index, val); | 
 | 	if (err == 0) | 
 | 		err = 1; | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&private->data_mutex); | 
 | 	return err; | 
 | } | 
 |  | 
 | static const struct snd_kcontrol_new scarlett2_input_gain_ctl = { | 
 | 	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, | 
 | 	.access = SNDRV_CTL_ELEM_ACCESS_READWRITE | | 
 | 		  SNDRV_CTL_ELEM_ACCESS_TLV_READ, | 
 | 	.name = "", | 
 | 	.info = scarlett2_input_gain_ctl_info, | 
 | 	.get  = scarlett2_input_gain_ctl_get, | 
 | 	.put  = scarlett2_input_gain_ctl_put, | 
 | 	.private_value = 0, /* max value */ | 
 | }; | 
 |  | 
 | /*** Safe Controls ***/ | 
 |  | 
 | static int scarlett2_update_input_safe(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	const struct scarlett2_device_info *info = private->info; | 
 |  | 
 | 	private->input_safe_updated = 0; | 
 |  | 
 | 	if (!info->safe_input_count) | 
 | 		return 0; | 
 |  | 
 | 	return scarlett2_usb_get_config( | 
 | 		mixer, SCARLETT2_CONFIG_SAFE_SWITCH, | 
 | 		info->safe_input_count, private->safe_switch); | 
 | } | 
 |  | 
 | static int scarlett2_safe_ctl_get(struct snd_kcontrol *kctl, | 
 | 				  struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct usb_mixer_interface *mixer = elem->head.mixer; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	int err = 0; | 
 |  | 
 | 	mutex_lock(&private->data_mutex); | 
 |  | 
 | 	if (private->hwdep_in_use) { | 
 | 		err = -EBUSY; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	if (private->input_safe_updated) { | 
 | 		err = scarlett2_update_input_safe(mixer); | 
 | 		if (err < 0) | 
 | 			goto unlock; | 
 | 	} | 
 | 	ucontrol->value.integer.value[0] = | 
 | 		private->safe_switch[elem->control]; | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&private->data_mutex); | 
 | 	return err; | 
 | } | 
 |  | 
 | static int scarlett2_safe_ctl_put(struct snd_kcontrol *kctl, | 
 | 				  struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct usb_mixer_interface *mixer = elem->head.mixer; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 |  | 
 | 	int index = elem->control; | 
 | 	int oval, val, err; | 
 |  | 
 | 	mutex_lock(&private->data_mutex); | 
 |  | 
 | 	if (private->hwdep_in_use) { | 
 | 		err = -EBUSY; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	err = scarlett2_check_put_during_autogain(mixer); | 
 | 	if (err < 0) | 
 | 		goto unlock; | 
 |  | 
 | 	oval = private->safe_switch[index]; | 
 | 	val = !!ucontrol->value.integer.value[0]; | 
 |  | 
 | 	if (oval == val) | 
 | 		goto unlock; | 
 |  | 
 | 	private->safe_switch[index] = val; | 
 |  | 
 | 	/* Send switch change to the device */ | 
 | 	err = scarlett2_usb_set_config(mixer, SCARLETT2_CONFIG_SAFE_SWITCH, | 
 | 				       index, val); | 
 | 	if (err == 0) | 
 | 		err = 1; | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&private->data_mutex); | 
 | 	return err; | 
 | } | 
 |  | 
 | static const struct snd_kcontrol_new scarlett2_safe_ctl = { | 
 | 	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, | 
 | 	.name = "", | 
 | 	.info = scarlett2_autogain_disables_ctl_info, | 
 | 	.get  = scarlett2_safe_ctl_get, | 
 | 	.put  = scarlett2_safe_ctl_put, | 
 | }; | 
 |  | 
 | /*** PCM Input Control ***/ | 
 |  | 
 | static int scarlett2_update_pcm_input_switch(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	int err; | 
 |  | 
 | 	private->pcm_input_switch_updated = 0; | 
 |  | 
 | 	err = scarlett2_usb_get_config( | 
 | 		mixer, SCARLETT2_CONFIG_PCM_INPUT_SWITCH, | 
 | 		1, &private->pcm_input_switch); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int scarlett2_pcm_input_switch_ctl_get( | 
 | 	struct snd_kcontrol *kctl, struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct usb_mixer_interface *mixer = elem->head.mixer; | 
 | 	struct scarlett2_data *private = elem->head.mixer->private_data; | 
 | 	int err = 0; | 
 |  | 
 | 	mutex_lock(&private->data_mutex); | 
 |  | 
 | 	if (private->pcm_input_switch_updated) { | 
 | 		err = scarlett2_update_pcm_input_switch(mixer); | 
 | 		if (err < 0) | 
 | 			goto unlock; | 
 | 	} | 
 | 	ucontrol->value.enumerated.item[0] = private->pcm_input_switch; | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&private->data_mutex); | 
 | 	return err; | 
 | } | 
 |  | 
 | static int scarlett2_pcm_input_switch_ctl_put( | 
 | 	struct snd_kcontrol *kctl, struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct usb_mixer_interface *mixer = elem->head.mixer; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 |  | 
 | 	int oval, val, err = 0; | 
 |  | 
 | 	mutex_lock(&private->data_mutex); | 
 |  | 
 | 	if (private->hwdep_in_use) { | 
 | 		err = -EBUSY; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	oval = private->pcm_input_switch; | 
 | 	val = !!ucontrol->value.integer.value[0]; | 
 |  | 
 | 	if (oval == val) | 
 | 		goto unlock; | 
 |  | 
 | 	private->pcm_input_switch = val; | 
 |  | 
 | 	/* Send switch change to the device */ | 
 | 	err = scarlett2_usb_set_config( | 
 | 		mixer, SCARLETT2_CONFIG_PCM_INPUT_SWITCH, | 
 | 		0, val); | 
 | 	if (err == 0) | 
 | 		err = 1; | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&private->data_mutex); | 
 | 	return err; | 
 | } | 
 |  | 
 | static int scarlett2_pcm_input_switch_ctl_info( | 
 | 	struct snd_kcontrol *kctl, struct snd_ctl_elem_info *uinfo) | 
 | { | 
 | 	static const char *const values[2] = { | 
 | 		"Direct", "Mixer" | 
 | 	}; | 
 |  | 
 | 	return snd_ctl_enum_info( | 
 | 		uinfo, 1, 2, values); | 
 | } | 
 |  | 
 | static const struct snd_kcontrol_new scarlett2_pcm_input_switch_ctl = { | 
 | 	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, | 
 | 	.name = "", | 
 | 	.info = scarlett2_pcm_input_switch_ctl_info, | 
 | 	.get  = scarlett2_pcm_input_switch_ctl_get, | 
 | 	.put  = scarlett2_pcm_input_switch_ctl_put | 
 | }; | 
 |  | 
 | /*** Analogue Line Out Volume Controls ***/ | 
 |  | 
 | /* Update hardware volume controls after receiving notification that | 
 |  * they have changed | 
 |  */ | 
 | static int scarlett2_update_volumes(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	s16 vol; | 
 | 	int err, i; | 
 |  | 
 | 	private->vol_updated = 0; | 
 |  | 
 | 	if (scarlett2_has_config_item(private, | 
 | 				      SCARLETT2_CONFIG_MASTER_VOLUME)) { | 
 | 		err = scarlett2_usb_get_config( | 
 | 			mixer, SCARLETT2_CONFIG_MASTER_VOLUME, | 
 | 			1, &vol); | 
 | 		if (err < 0) | 
 | 			return err; | 
 |  | 
 | 		private->master_vol = clamp(vol + SCARLETT2_VOLUME_BIAS, | 
 | 					    0, SCARLETT2_VOLUME_BIAS); | 
 |  | 
 | 		if (scarlett2_has_config_item(private, | 
 | 					      SCARLETT2_CONFIG_SW_HW_SWITCH)) | 
 | 			for (i = 0; i < private->num_line_out; i++) | 
 | 				if (private->vol_sw_hw_switch[i]) | 
 | 					private->vol[i] = private->master_vol; | 
 | 	} | 
 |  | 
 | 	if (scarlett2_has_config_item(private, | 
 | 				      SCARLETT2_CONFIG_HEADPHONE_VOLUME)) { | 
 | 		err = scarlett2_usb_get_config( | 
 | 			mixer, SCARLETT2_CONFIG_HEADPHONE_VOLUME, | 
 | 			1, &vol); | 
 | 		if (err < 0) | 
 | 			return err; | 
 |  | 
 | 		private->headphone_vol = clamp(vol + SCARLETT2_VOLUME_BIAS, | 
 | 					       0, SCARLETT2_VOLUME_BIAS); | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int scarlett2_volume_ctl_info(struct snd_kcontrol *kctl, | 
 | 				     struct snd_ctl_elem_info *uinfo) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 |  | 
 | 	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; | 
 | 	uinfo->count = elem->channels; | 
 | 	uinfo->value.integer.min = 0; | 
 | 	uinfo->value.integer.max = SCARLETT2_VOLUME_BIAS; | 
 | 	uinfo->value.integer.step = 1; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int scarlett2_master_volume_ctl_get(struct snd_kcontrol *kctl, | 
 | 					   struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct usb_mixer_interface *mixer = elem->head.mixer; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	int err = 0; | 
 |  | 
 | 	mutex_lock(&private->data_mutex); | 
 |  | 
 | 	if (private->hwdep_in_use) { | 
 | 		err = -EBUSY; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	if (private->vol_updated) { | 
 | 		err = scarlett2_update_volumes(mixer); | 
 | 		if (err < 0) | 
 | 			goto unlock; | 
 | 	} | 
 | 	ucontrol->value.integer.value[0] = private->master_vol; | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&private->data_mutex); | 
 | 	return err; | 
 | } | 
 |  | 
 | static int scarlett2_headphone_volume_ctl_get( | 
 | 	struct snd_kcontrol *kctl, | 
 | 	struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct usb_mixer_interface *mixer = elem->head.mixer; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	int err = 0; | 
 |  | 
 | 	mutex_lock(&private->data_mutex); | 
 |  | 
 | 	if (private->hwdep_in_use) { | 
 | 		err = -EBUSY; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	if (private->vol_updated) { | 
 | 		err = scarlett2_update_volumes(mixer); | 
 | 		if (err < 0) | 
 | 			goto unlock; | 
 | 	} | 
 | 	ucontrol->value.integer.value[0] = private->headphone_vol; | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&private->data_mutex); | 
 | 	return err; | 
 | } | 
 |  | 
 | static int line_out_remap(struct scarlett2_data *private, int index) | 
 | { | 
 | 	const struct scarlett2_device_info *info = private->info; | 
 |  | 
 | 	if (!info->line_out_remap_enable) | 
 | 		return index; | 
 |  | 
 | 	if (index >= private->num_line_out) | 
 | 		return index; | 
 |  | 
 | 	return info->line_out_remap[index]; | 
 | } | 
 |  | 
 | static int scarlett2_volume_ctl_get(struct snd_kcontrol *kctl, | 
 | 				    struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct usb_mixer_interface *mixer = elem->head.mixer; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	int index = line_out_remap(private, elem->control); | 
 | 	int err = 0; | 
 |  | 
 | 	mutex_lock(&private->data_mutex); | 
 |  | 
 | 	if (private->hwdep_in_use) { | 
 | 		err = -EBUSY; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	if (private->vol_updated) { | 
 | 		err = scarlett2_update_volumes(mixer); | 
 | 		if (err < 0) | 
 | 			goto unlock; | 
 | 	} | 
 | 	ucontrol->value.integer.value[0] = private->vol[index]; | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&private->data_mutex); | 
 | 	return err; | 
 | } | 
 |  | 
 | static int scarlett2_volume_ctl_put(struct snd_kcontrol *kctl, | 
 | 				    struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct usb_mixer_interface *mixer = elem->head.mixer; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	int index = line_out_remap(private, elem->control); | 
 | 	int oval, val, err = 0; | 
 |  | 
 | 	mutex_lock(&private->data_mutex); | 
 |  | 
 | 	if (private->hwdep_in_use) { | 
 | 		err = -EBUSY; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	oval = private->vol[index]; | 
 | 	val = ucontrol->value.integer.value[0]; | 
 |  | 
 | 	if (oval == val) | 
 | 		goto unlock; | 
 |  | 
 | 	private->vol[index] = val; | 
 | 	err = scarlett2_usb_set_config(mixer, SCARLETT2_CONFIG_LINE_OUT_VOLUME, | 
 | 				       index, val - SCARLETT2_VOLUME_BIAS); | 
 | 	if (err == 0) | 
 | 		err = 1; | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&private->data_mutex); | 
 | 	return err; | 
 | } | 
 |  | 
 | static const DECLARE_TLV_DB_MINMAX( | 
 | 	db_scale_scarlett2_volume, -SCARLETT2_VOLUME_BIAS * 100, 0 | 
 | ); | 
 |  | 
 | static const struct snd_kcontrol_new scarlett2_master_volume_ctl = { | 
 | 	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, | 
 | 	.access = SNDRV_CTL_ELEM_ACCESS_READ | | 
 | 		  SNDRV_CTL_ELEM_ACCESS_TLV_READ, | 
 | 	.name = "", | 
 | 	.info = scarlett2_volume_ctl_info, | 
 | 	.get  = scarlett2_master_volume_ctl_get, | 
 | 	.private_value = 0, /* max value */ | 
 | 	.tlv = { .p = db_scale_scarlett2_volume } | 
 | }; | 
 |  | 
 | static const struct snd_kcontrol_new scarlett2_headphone_volume_ctl = { | 
 | 	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, | 
 | 	.access = SNDRV_CTL_ELEM_ACCESS_READ | | 
 | 		  SNDRV_CTL_ELEM_ACCESS_TLV_READ, | 
 | 	.name = "", | 
 | 	.info = scarlett2_volume_ctl_info, | 
 | 	.get  = scarlett2_headphone_volume_ctl_get, | 
 | 	.private_value = 0, /* max value */ | 
 | 	.tlv = { .p = db_scale_scarlett2_volume } | 
 | }; | 
 |  | 
 | static const struct snd_kcontrol_new scarlett2_line_out_volume_ctl = { | 
 | 	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, | 
 | 	.access = SNDRV_CTL_ELEM_ACCESS_READWRITE | | 
 | 		  SNDRV_CTL_ELEM_ACCESS_TLV_READ, | 
 | 	.name = "", | 
 | 	.info = scarlett2_volume_ctl_info, | 
 | 	.get  = scarlett2_volume_ctl_get, | 
 | 	.put  = scarlett2_volume_ctl_put, | 
 | 	.private_value = 0, /* max value */ | 
 | 	.tlv = { .p = db_scale_scarlett2_volume } | 
 | }; | 
 |  | 
 | /*** Mute Switch Controls ***/ | 
 |  | 
 | static int scarlett2_update_dim_mute(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	int err, i; | 
 | 	u8 mute; | 
 |  | 
 | 	private->dim_mute_updated = 0; | 
 |  | 
 | 	if (!scarlett2_has_config_item(private, SCARLETT2_CONFIG_SW_HW_SWITCH)) | 
 | 		return 0; | 
 |  | 
 | 	err = scarlett2_usb_get_config( | 
 | 		mixer, SCARLETT2_CONFIG_DIM_MUTE, | 
 | 		SCARLETT2_DIM_MUTE_COUNT, private->dim_mute); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	for (i = 0; i < SCARLETT2_DIM_MUTE_COUNT; i++) | 
 | 		private->dim_mute[i] = !!private->dim_mute[i]; | 
 |  | 
 | 	mute = private->dim_mute[SCARLETT2_BUTTON_MUTE]; | 
 |  | 
 | 	for (i = 0; i < private->num_line_out; i++) | 
 | 		if (private->vol_sw_hw_switch[i]) | 
 | 			private->mute_switch[i] = mute; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int scarlett2_mute_ctl_get(struct snd_kcontrol *kctl, | 
 | 					struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct usb_mixer_interface *mixer = elem->head.mixer; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	int index = line_out_remap(private, elem->control); | 
 | 	int err = 0; | 
 |  | 
 | 	mutex_lock(&private->data_mutex); | 
 |  | 
 | 	if (private->hwdep_in_use) { | 
 | 		err = -EBUSY; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	if (private->dim_mute_updated) { | 
 | 		err = scarlett2_update_dim_mute(mixer); | 
 | 		if (err < 0) | 
 | 			goto unlock; | 
 | 	} | 
 | 	ucontrol->value.integer.value[0] = private->mute_switch[index]; | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&private->data_mutex); | 
 | 	return err; | 
 | } | 
 |  | 
 | static int scarlett2_mute_ctl_put(struct snd_kcontrol *kctl, | 
 | 					struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct usb_mixer_interface *mixer = elem->head.mixer; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	int index = line_out_remap(private, elem->control); | 
 | 	int oval, val, err = 0; | 
 |  | 
 | 	mutex_lock(&private->data_mutex); | 
 |  | 
 | 	if (private->hwdep_in_use) { | 
 | 		err = -EBUSY; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	oval = private->mute_switch[index]; | 
 | 	val = !!ucontrol->value.integer.value[0]; | 
 |  | 
 | 	if (oval == val) | 
 | 		goto unlock; | 
 |  | 
 | 	private->mute_switch[index] = val; | 
 |  | 
 | 	/* Send mute change to the device */ | 
 | 	err = scarlett2_usb_set_config(mixer, SCARLETT2_CONFIG_MUTE_SWITCH, | 
 | 				       index, val); | 
 | 	if (err == 0) | 
 | 		err = 1; | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&private->data_mutex); | 
 | 	return err; | 
 | } | 
 |  | 
 | static const struct snd_kcontrol_new scarlett2_mute_ctl = { | 
 | 	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, | 
 | 	.name = "", | 
 | 	.info = snd_ctl_boolean_mono_info, | 
 | 	.get  = scarlett2_mute_ctl_get, | 
 | 	.put  = scarlett2_mute_ctl_put, | 
 | }; | 
 |  | 
 | /*** HW/SW Volume Switch Controls ***/ | 
 |  | 
 | static void scarlett2_sw_hw_ctl_ro(struct scarlett2_data *private, int index) | 
 | { | 
 | 	private->sw_hw_ctls[index]->vd[0].access &= | 
 | 		~SNDRV_CTL_ELEM_ACCESS_WRITE; | 
 | } | 
 |  | 
 | static void scarlett2_sw_hw_ctl_rw(struct scarlett2_data *private, int index) | 
 | { | 
 | 	private->sw_hw_ctls[index]->vd[0].access |= | 
 | 		SNDRV_CTL_ELEM_ACCESS_WRITE; | 
 | } | 
 |  | 
 | static int scarlett2_sw_hw_enum_ctl_info(struct snd_kcontrol *kctl, | 
 | 					 struct snd_ctl_elem_info *uinfo) | 
 | { | 
 | 	static const char *const values[2] = { | 
 | 		"SW", "HW" | 
 | 	}; | 
 |  | 
 | 	return snd_ctl_enum_info(uinfo, 1, 2, values); | 
 | } | 
 |  | 
 | static int scarlett2_sw_hw_enum_ctl_get(struct snd_kcontrol *kctl, | 
 | 					struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct scarlett2_data *private = elem->head.mixer->private_data; | 
 | 	int index = line_out_remap(private, elem->control); | 
 |  | 
 | 	ucontrol->value.enumerated.item[0] = private->vol_sw_hw_switch[index]; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void scarlett2_vol_ctl_set_writable(struct usb_mixer_interface *mixer, | 
 | 					   int index, int value) | 
 | { | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	struct snd_card *card = mixer->chip->card; | 
 |  | 
 | 	/* Set/Clear write bits */ | 
 | 	if (value) { | 
 | 		private->vol_ctls[index]->vd[0].access |= | 
 | 			SNDRV_CTL_ELEM_ACCESS_WRITE; | 
 | 		private->mute_ctls[index]->vd[0].access |= | 
 | 			SNDRV_CTL_ELEM_ACCESS_WRITE; | 
 | 	} else { | 
 | 		private->vol_ctls[index]->vd[0].access &= | 
 | 			~SNDRV_CTL_ELEM_ACCESS_WRITE; | 
 | 		private->mute_ctls[index]->vd[0].access &= | 
 | 			~SNDRV_CTL_ELEM_ACCESS_WRITE; | 
 | 	} | 
 |  | 
 | 	/* Notify of write bit and possible value change */ | 
 | 	snd_ctl_notify(card, | 
 | 		       SNDRV_CTL_EVENT_MASK_VALUE | SNDRV_CTL_EVENT_MASK_INFO, | 
 | 		       &private->vol_ctls[index]->id); | 
 | 	snd_ctl_notify(card, | 
 | 		       SNDRV_CTL_EVENT_MASK_VALUE | SNDRV_CTL_EVENT_MASK_INFO, | 
 | 		       &private->mute_ctls[index]->id); | 
 | } | 
 |  | 
 | static int scarlett2_sw_hw_change(struct usb_mixer_interface *mixer, | 
 | 				  int ctl_index, int val) | 
 | { | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	int index = line_out_remap(private, ctl_index); | 
 | 	int err; | 
 |  | 
 | 	private->vol_sw_hw_switch[index] = val; | 
 |  | 
 | 	/* Change access mode to RO (hardware controlled volume) | 
 | 	 * or RW (software controlled volume) | 
 | 	 */ | 
 | 	scarlett2_vol_ctl_set_writable(mixer, ctl_index, !val); | 
 |  | 
 | 	/* Reset volume/mute to master volume/mute */ | 
 | 	private->vol[index] = private->master_vol; | 
 | 	private->mute_switch[index] = private->dim_mute[SCARLETT2_BUTTON_MUTE]; | 
 |  | 
 | 	/* Set SW volume to current HW volume */ | 
 | 	err = scarlett2_usb_set_config( | 
 | 		mixer, SCARLETT2_CONFIG_LINE_OUT_VOLUME, | 
 | 		index, private->master_vol - SCARLETT2_VOLUME_BIAS); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	/* Set SW mute to current HW mute */ | 
 | 	err = scarlett2_usb_set_config( | 
 | 		mixer, SCARLETT2_CONFIG_MUTE_SWITCH, | 
 | 		index, private->dim_mute[SCARLETT2_BUTTON_MUTE]); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	/* Send SW/HW switch change to the device */ | 
 | 	return scarlett2_usb_set_config(mixer, SCARLETT2_CONFIG_SW_HW_SWITCH, | 
 | 					index, val); | 
 | } | 
 |  | 
 | static int scarlett2_sw_hw_enum_ctl_put(struct snd_kcontrol *kctl, | 
 | 					struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct usb_mixer_interface *mixer = elem->head.mixer; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	int ctl_index = elem->control; | 
 | 	int index = line_out_remap(private, ctl_index); | 
 | 	int oval, val, err = 0; | 
 |  | 
 | 	mutex_lock(&private->data_mutex); | 
 |  | 
 | 	if (private->hwdep_in_use) { | 
 | 		err = -EBUSY; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	oval = private->vol_sw_hw_switch[index]; | 
 | 	val = !!ucontrol->value.enumerated.item[0]; | 
 |  | 
 | 	if (oval == val) | 
 | 		goto unlock; | 
 |  | 
 | 	err = scarlett2_sw_hw_change(mixer, ctl_index, val); | 
 | 	if (err == 0) | 
 | 		err = 1; | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&private->data_mutex); | 
 | 	return err; | 
 | } | 
 |  | 
 | static const struct snd_kcontrol_new scarlett2_sw_hw_enum_ctl = { | 
 | 	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, | 
 | 	.name = "", | 
 | 	.info = scarlett2_sw_hw_enum_ctl_info, | 
 | 	.get  = scarlett2_sw_hw_enum_ctl_get, | 
 | 	.put  = scarlett2_sw_hw_enum_ctl_put, | 
 | }; | 
 |  | 
 | /*** Line Level/Instrument Level Switch Controls ***/ | 
 |  | 
 | static int scarlett2_update_input_level(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	const struct scarlett2_device_info *info = private->info; | 
 |  | 
 | 	private->input_level_updated = 0; | 
 |  | 
 | 	if (!info->level_input_count) | 
 | 		return 0; | 
 |  | 
 | 	return scarlett2_usb_get_config( | 
 | 		mixer, SCARLETT2_CONFIG_LEVEL_SWITCH, | 
 | 		info->level_input_count + info->level_input_first, | 
 | 		private->level_switch); | 
 | } | 
 |  | 
 | static int scarlett2_level_enum_ctl_info(struct snd_kcontrol *kctl, | 
 | 					 struct snd_ctl_elem_info *uinfo) | 
 | { | 
 | 	static const char *const values[2] = { | 
 | 		"Line", "Inst" | 
 | 	}; | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct usb_mixer_interface *mixer = elem->head.mixer; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	int err; | 
 |  | 
 | 	mutex_lock(&private->data_mutex); | 
 |  | 
 | 	if (private->hwdep_in_use) { | 
 | 		err = -EBUSY; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	err = scarlett2_check_autogain_updated(mixer); | 
 | 	if (err < 0) | 
 | 		goto unlock; | 
 |  | 
 | 	err = snd_ctl_enum_info(uinfo, 1, 2, values); | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&private->data_mutex); | 
 | 	return err; | 
 | } | 
 |  | 
 | static int scarlett2_level_enum_ctl_get(struct snd_kcontrol *kctl, | 
 | 					struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct usb_mixer_interface *mixer = elem->head.mixer; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	const struct scarlett2_device_info *info = private->info; | 
 |  | 
 | 	int index = elem->control + info->level_input_first; | 
 | 	int err = 0; | 
 |  | 
 | 	mutex_lock(&private->data_mutex); | 
 |  | 
 | 	if (private->hwdep_in_use) { | 
 | 		err = -EBUSY; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	if (private->input_level_updated) { | 
 | 		err = scarlett2_update_input_level(mixer); | 
 | 		if (err < 0) | 
 | 			goto unlock; | 
 | 	} | 
 | 	ucontrol->value.enumerated.item[0] = scarlett2_decode_muteable( | 
 | 		private->level_switch[index]); | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&private->data_mutex); | 
 | 	return err; | 
 | } | 
 |  | 
 | static int scarlett2_level_enum_ctl_put(struct snd_kcontrol *kctl, | 
 | 					struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct usb_mixer_interface *mixer = elem->head.mixer; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	const struct scarlett2_device_info *info = private->info; | 
 |  | 
 | 	int index = elem->control + info->level_input_first; | 
 | 	int oval, val, err; | 
 |  | 
 | 	mutex_lock(&private->data_mutex); | 
 |  | 
 | 	if (private->hwdep_in_use) { | 
 | 		err = -EBUSY; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	err = scarlett2_check_put_during_autogain(mixer); | 
 | 	if (err < 0) | 
 | 		goto unlock; | 
 |  | 
 | 	oval = private->level_switch[index]; | 
 | 	val = !!ucontrol->value.enumerated.item[0]; | 
 |  | 
 | 	if (oval == val) | 
 | 		goto unlock; | 
 |  | 
 | 	private->level_switch[index] = val; | 
 |  | 
 | 	/* To set the Gen 4 muteable controls, bit 1 gets set instead */ | 
 | 	if (private->config_set->items[SCARLETT2_CONFIG_LEVEL_SWITCH].mute) | 
 | 		val = (!val) | 0x02; | 
 |  | 
 | 	/* Send switch change to the device */ | 
 | 	err = scarlett2_usb_set_config(mixer, SCARLETT2_CONFIG_LEVEL_SWITCH, | 
 | 				       index, val); | 
 | 	if (err == 0) | 
 | 		err = 1; | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&private->data_mutex); | 
 | 	return err; | 
 | } | 
 |  | 
 | static const struct snd_kcontrol_new scarlett2_level_enum_ctl = { | 
 | 	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, | 
 | 	.name = "", | 
 | 	.info = scarlett2_level_enum_ctl_info, | 
 | 	.get  = scarlett2_level_enum_ctl_get, | 
 | 	.put  = scarlett2_level_enum_ctl_put, | 
 | }; | 
 |  | 
 | /*** Pad Switch Controls ***/ | 
 |  | 
 | static int scarlett2_update_input_pad(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	const struct scarlett2_device_info *info = private->info; | 
 |  | 
 | 	private->input_pad_updated = 0; | 
 |  | 
 | 	if (!info->pad_input_count) | 
 | 		return 0; | 
 |  | 
 | 	return scarlett2_usb_get_config( | 
 | 		mixer, SCARLETT2_CONFIG_PAD_SWITCH, | 
 | 		info->pad_input_count, private->pad_switch); | 
 | } | 
 |  | 
 | static int scarlett2_pad_ctl_get(struct snd_kcontrol *kctl, | 
 | 				 struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct usb_mixer_interface *mixer = elem->head.mixer; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	int err = 0; | 
 |  | 
 | 	mutex_lock(&private->data_mutex); | 
 |  | 
 | 	if (private->hwdep_in_use) { | 
 | 		err = -EBUSY; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	if (private->input_pad_updated) { | 
 | 		err = scarlett2_update_input_pad(mixer); | 
 | 		if (err < 0) | 
 | 			goto unlock; | 
 | 	} | 
 | 	ucontrol->value.integer.value[0] = | 
 | 		private->pad_switch[elem->control]; | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&private->data_mutex); | 
 | 	return err; | 
 | } | 
 |  | 
 | static int scarlett2_pad_ctl_put(struct snd_kcontrol *kctl, | 
 | 				 struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct usb_mixer_interface *mixer = elem->head.mixer; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 |  | 
 | 	int index = elem->control; | 
 | 	int oval, val, err = 0; | 
 |  | 
 | 	mutex_lock(&private->data_mutex); | 
 |  | 
 | 	if (private->hwdep_in_use) { | 
 | 		err = -EBUSY; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	oval = private->pad_switch[index]; | 
 | 	val = !!ucontrol->value.integer.value[0]; | 
 |  | 
 | 	if (oval == val) | 
 | 		goto unlock; | 
 |  | 
 | 	private->pad_switch[index] = val; | 
 |  | 
 | 	/* Send switch change to the device */ | 
 | 	err = scarlett2_usb_set_config(mixer, SCARLETT2_CONFIG_PAD_SWITCH, | 
 | 				       index, val); | 
 | 	if (err == 0) | 
 | 		err = 1; | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&private->data_mutex); | 
 | 	return err; | 
 | } | 
 |  | 
 | static const struct snd_kcontrol_new scarlett2_pad_ctl = { | 
 | 	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, | 
 | 	.name = "", | 
 | 	.info = snd_ctl_boolean_mono_info, | 
 | 	.get  = scarlett2_pad_ctl_get, | 
 | 	.put  = scarlett2_pad_ctl_put, | 
 | }; | 
 |  | 
 | /*** Air Switch Controls ***/ | 
 |  | 
 | static int scarlett2_update_input_air(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	const struct scarlett2_device_info *info = private->info; | 
 |  | 
 | 	private->input_air_updated = 0; | 
 |  | 
 | 	if (!info->air_input_count) | 
 | 		return 0; | 
 |  | 
 | 	return scarlett2_usb_get_config( | 
 | 		mixer, SCARLETT2_CONFIG_AIR_SWITCH, | 
 | 		info->air_input_count, private->air_switch); | 
 | } | 
 |  | 
 | static int scarlett2_air_ctl_get(struct snd_kcontrol *kctl, | 
 | 				 struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct usb_mixer_interface *mixer = elem->head.mixer; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	int err = 0; | 
 |  | 
 | 	mutex_lock(&private->data_mutex); | 
 |  | 
 | 	if (private->hwdep_in_use) { | 
 | 		err = -EBUSY; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	if (private->input_air_updated) { | 
 | 		err = scarlett2_update_input_air(mixer); | 
 | 		if (err < 0) | 
 | 			goto unlock; | 
 | 	} | 
 | 	ucontrol->value.integer.value[0] = private->air_switch[elem->control]; | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&private->data_mutex); | 
 | 	return err; | 
 | } | 
 |  | 
 | static int scarlett2_air_ctl_put(struct snd_kcontrol *kctl, | 
 | 				 struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct usb_mixer_interface *mixer = elem->head.mixer; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 |  | 
 | 	int index = elem->control; | 
 | 	int oval, val, err; | 
 |  | 
 | 	mutex_lock(&private->data_mutex); | 
 |  | 
 | 	if (private->hwdep_in_use) { | 
 | 		err = -EBUSY; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	err = scarlett2_check_put_during_autogain(mixer); | 
 | 	if (err < 0) | 
 | 		goto unlock; | 
 |  | 
 | 	oval = private->air_switch[index]; | 
 | 	val = ucontrol->value.integer.value[0]; | 
 |  | 
 | 	if (oval == val) | 
 | 		goto unlock; | 
 |  | 
 | 	private->air_switch[index] = val; | 
 |  | 
 | 	/* Send switch change to the device */ | 
 | 	err = scarlett2_usb_set_config(mixer, SCARLETT2_CONFIG_AIR_SWITCH, | 
 | 				       index, val); | 
 | 	if (err == 0) | 
 | 		err = 1; | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&private->data_mutex); | 
 | 	return err; | 
 | } | 
 |  | 
 | static int scarlett2_air_with_drive_ctl_info( | 
 | 	struct snd_kcontrol *kctl, struct snd_ctl_elem_info *uinfo) | 
 | { | 
 | 	static const char *const values[3] = { | 
 | 		"Off", "Presence", "Presence + Drive" | 
 | 	}; | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct usb_mixer_interface *mixer = elem->head.mixer; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	int err; | 
 |  | 
 | 	mutex_lock(&private->data_mutex); | 
 |  | 
 | 	if (private->hwdep_in_use) { | 
 | 		err = -EBUSY; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	err = scarlett2_check_autogain_updated(mixer); | 
 | 	if (err < 0) | 
 | 		goto unlock; | 
 |  | 
 | 	err = snd_ctl_enum_info(uinfo, 1, 3, values); | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&private->data_mutex); | 
 | 	return err; | 
 | } | 
 |  | 
 | static const struct snd_kcontrol_new scarlett2_air_ctl[2] = { | 
 | 	{ | 
 | 		.iface = SNDRV_CTL_ELEM_IFACE_MIXER, | 
 | 		.name = "", | 
 | 		.info = snd_ctl_boolean_mono_info, | 
 | 		.get  = scarlett2_air_ctl_get, | 
 | 		.put  = scarlett2_air_ctl_put, | 
 | 	}, | 
 | 	{ | 
 | 		.iface = SNDRV_CTL_ELEM_IFACE_MIXER, | 
 | 		.name = "", | 
 | 		.info = scarlett2_air_with_drive_ctl_info, | 
 | 		.get  = scarlett2_air_ctl_get, | 
 | 		.put  = scarlett2_air_ctl_put, | 
 | 	} | 
 | }; | 
 |  | 
 | /*** DSP Switch Control ***/ | 
 |  | 
 | static int scarlett2_update_input_dsp(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	const struct scarlett2_device_info *info = private->info; | 
 |  | 
 | 	private->input_dsp_updated = 0; | 
 |  | 
 | 	if (!info->dsp_input_count) | 
 | 		return 0; | 
 |  | 
 | 	return scarlett2_usb_get_config( | 
 | 		mixer, SCARLETT2_CONFIG_DSP_SWITCH, | 
 | 		info->dsp_input_count, private->dsp_switch); | 
 | } | 
 |  | 
 | static int scarlett2_dsp_ctl_get(struct snd_kcontrol *kctl, | 
 | 				 struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct usb_mixer_interface *mixer = elem->head.mixer; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	int err = 0; | 
 |  | 
 | 	mutex_lock(&private->data_mutex); | 
 |  | 
 | 	if (private->hwdep_in_use) { | 
 | 		err = -EBUSY; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	if (private->input_dsp_updated) { | 
 | 		err = scarlett2_update_input_dsp(mixer); | 
 | 		if (err < 0) | 
 | 			goto unlock; | 
 | 	} | 
 | 	ucontrol->value.integer.value[0] = private->dsp_switch[elem->control]; | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&private->data_mutex); | 
 | 	return err; | 
 | } | 
 |  | 
 | static int scarlett2_dsp_ctl_put(struct snd_kcontrol *kctl, | 
 | 				 struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct usb_mixer_interface *mixer = elem->head.mixer; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 |  | 
 | 	int index = elem->control; | 
 | 	int oval, val, err; | 
 |  | 
 | 	mutex_lock(&private->data_mutex); | 
 |  | 
 | 	if (private->hwdep_in_use) { | 
 | 		err = -EBUSY; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	err = scarlett2_check_put_during_autogain(mixer); | 
 | 	if (err < 0) | 
 | 		goto unlock; | 
 |  | 
 | 	oval = private->dsp_switch[index]; | 
 | 	val = ucontrol->value.integer.value[0]; | 
 |  | 
 | 	if (oval == val) | 
 | 		goto unlock; | 
 |  | 
 | 	private->dsp_switch[index] = val; | 
 |  | 
 | 	/* Send switch change to the device */ | 
 | 	err = scarlett2_usb_set_config(mixer, SCARLETT2_CONFIG_DSP_SWITCH, | 
 | 				       index, val); | 
 | 	if (err == 0) | 
 | 		err = 1; | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&private->data_mutex); | 
 | 	return err; | 
 | } | 
 |  | 
 | static const struct snd_kcontrol_new scarlett2_dsp_ctl = { | 
 | 	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, | 
 | 	.name = "", | 
 | 	.info = scarlett2_autogain_disables_ctl_info, | 
 | 	.get  = scarlett2_dsp_ctl_get, | 
 | 	.put  = scarlett2_dsp_ctl_put, | 
 | }; | 
 |  | 
 | /*** DSP Compressor Parameter Controls ***/ | 
 |  | 
 | static int scarlett2_update_compressor_values(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	const struct scarlett2_device_info *info = private->info; | 
 | 	int err, i, j; | 
 |  | 
 | 	if (!info->dsp_input_count) | 
 | 		return 0; | 
 |  | 
 | 	err = scarlett2_usb_get_config( | 
 | 		mixer, SCARLETT2_CONFIG_COMPRESSOR_PARAMS, | 
 | 		SCARLETT2_COMPRESSOR_PARAM_COUNT * info->dsp_input_count, | 
 | 		private->compressor_values); | 
 |  | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	for (i = 0; i < SCARLETT2_COMPRESSOR_PARAM_COUNT; i++) { | 
 | 		const struct compressor_param *param = &compressor_params[i]; | 
 |  | 
 | 		for (j = 0; j < info->dsp_input_count; j++) { | 
 | 			int idx = i + j * SCARLETT2_COMPRESSOR_PARAM_COUNT; | 
 | 			int val = private->compressor_values[idx]; | 
 |  | 
 | 			val >>= param->scale_bits; | 
 | 			val = clamp(val, param->min, param->max); | 
 | 			private->compressor_values[idx] = val; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int scarlett2_compressor_ctl_get( | 
 | 	struct snd_kcontrol *kctl, struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct scarlett2_data *private = elem->head.mixer->private_data; | 
 |  | 
 | 	ucontrol->value.integer.value[0] = | 
 | 		private->compressor_values[elem->control]; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int scarlett2_compressor_ctl_put( | 
 | 	struct snd_kcontrol *kctl, struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct usb_mixer_interface *mixer = elem->head.mixer; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 |  | 
 | 	int index = elem->control; | 
 | 	int channel = index / SCARLETT2_COMPRESSOR_PARAM_COUNT; | 
 | 	int param_index = index % SCARLETT2_COMPRESSOR_PARAM_COUNT; | 
 | 	const struct compressor_param *param = &compressor_params[param_index]; | 
 |  | 
 | 	int oval, val, err; | 
 | 	s32 scaled_val; | 
 |  | 
 | 	mutex_lock(&private->data_mutex); | 
 |  | 
 | 	if (private->hwdep_in_use) { | 
 | 		err = -EBUSY; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	err = scarlett2_check_put_during_autogain(mixer); | 
 | 	if (err < 0) | 
 | 		goto unlock; | 
 |  | 
 | 	oval = private->compressor_values[index]; | 
 | 	val = ucontrol->value.integer.value[0]; | 
 | 	if (oval == val) | 
 | 		goto unlock; | 
 |  | 
 | 	private->compressor_values[index] = val; | 
 |  | 
 | 	scaled_val = val << param->scale_bits; | 
 |  | 
 | 	/* Send change to the device */ | 
 |  | 
 | 	/* The channel needs to be put in the parameter buffer index | 
 | 	 * field (param_buf_addr + 1); the value field isn't used in | 
 | 	 * this case. | 
 | 	 */ | 
 | 	err = scarlett2_usb_set_data( | 
 | 		mixer, private->config_set->param_buf_addr + 1, 1, channel); | 
 | 	if (err < 0) | 
 | 		goto unlock; | 
 |  | 
 | 	err = scarlett2_usb_set_config( | 
 | 		mixer, SCARLETT2_CONFIG_COMPRESSOR_PARAMS, index, scaled_val); | 
 | 	if (err < 0) | 
 | 		goto unlock; | 
 |  | 
 | 	if (err == 0) | 
 | 		err = 1; | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&private->data_mutex); | 
 | 	return err; | 
 | } | 
 |  | 
 | static int scarlett2_compressor_ctl_info( | 
 | 	struct snd_kcontrol *kctl, struct snd_ctl_elem_info *uinfo) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	int control = elem->control % SCARLETT2_COMPRESSOR_PARAM_COUNT; | 
 |  | 
 | 	uinfo->type = compressor_params[control].type; | 
 | 	uinfo->count = 1; | 
 | 	uinfo->value.integer.min = compressor_params[control].min; | 
 | 	uinfo->value.integer.max = compressor_params[control].max; | 
 | 	uinfo->value.integer.step = 1; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct snd_kcontrol_new scarlett2_compressor_ctl = { | 
 | 	.iface = SNDRV_CTL_ELEM_IFACE_CARD, | 
 | 	.name = "", | 
 | 	.info = scarlett2_compressor_ctl_info, | 
 | 	.get  = scarlett2_compressor_ctl_get, | 
 | 	.put  = scarlett2_compressor_ctl_put, | 
 | }; | 
 |  | 
 | /*** DSP Pre-Compressor and PEQ Filter Controls ***/ | 
 |  | 
 | static int scarlett2_precomp_flt_switch_ctl_get( | 
 | 	struct snd_kcontrol *kctl, struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct scarlett2_data *private = elem->head.mixer->private_data; | 
 |  | 
 | 	ucontrol->value.integer.value[0] = private->precomp_flt_switch[elem->control]; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int scarlett2_peq_flt_switch_ctl_get( | 
 | 	struct snd_kcontrol *kctl, struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct scarlett2_data *private = elem->head.mixer->private_data; | 
 |  | 
 | 	ucontrol->value.integer.value[0] = | 
 | 		private->peq_flt_switch[elem->control]; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int scarlett2_precomp_flt_switch_ctl_put( | 
 | 	struct snd_kcontrol *kctl, struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct usb_mixer_interface *mixer = elem->head.mixer; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	int oval, val, err = 0; | 
 |  | 
 | 	mutex_lock(&private->data_mutex); | 
 |  | 
 | 	if (private->hwdep_in_use) { | 
 | 		err = -EBUSY; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	oval = private->precomp_flt_switch[elem->control]; | 
 | 	val = ucontrol->value.integer.value[0]; | 
 |  | 
 | 	if (oval == val) | 
 | 		goto unlock; | 
 |  | 
 | 	private->precomp_flt_switch[elem->control] = val; | 
 |  | 
 | 	/* Send change to the device */ | 
 | 	err = scarlett2_usb_set_config( | 
 | 		mixer, SCARLETT2_CONFIG_PRECOMP_FLT_SWITCH, | 
 | 		elem->control, val); | 
 | 	if (err == 0) | 
 | 		err = 1; | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&private->data_mutex); | 
 | 	return err; | 
 | } | 
 |  | 
 | static int scarlett2_peq_flt_switch_ctl_put( | 
 | 	struct snd_kcontrol *kctl, struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct usb_mixer_interface *mixer = elem->head.mixer; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	int oval, val, err = 0; | 
 |  | 
 | 	mutex_lock(&private->data_mutex); | 
 |  | 
 | 	if (private->hwdep_in_use) { | 
 | 		err = -EBUSY; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	oval = private->peq_flt_switch[elem->control]; | 
 | 	val = ucontrol->value.integer.value[0]; | 
 |  | 
 | 	if (oval == val) | 
 | 		goto unlock; | 
 |  | 
 | 	private->peq_flt_switch[elem->control] = val; | 
 |  | 
 | 	/* Send change to the device */ | 
 | 	err = scarlett2_usb_set_config( | 
 | 		mixer, SCARLETT2_CONFIG_PEQ_FLT_SWITCH, | 
 | 		elem->control, val); | 
 | 	if (err == 0) | 
 | 		err = 1; | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&private->data_mutex); | 
 | 	return err; | 
 | } | 
 |  | 
 | static const struct snd_kcontrol_new scarlett2_precomp_flt_switch_ctl = { | 
 | 	.iface = SNDRV_CTL_ELEM_IFACE_CARD, | 
 | 	.name = "", | 
 | 	.info = snd_ctl_boolean_mono_info, | 
 | 	.get  = scarlett2_precomp_flt_switch_ctl_get, | 
 | 	.put  = scarlett2_precomp_flt_switch_ctl_put, | 
 | }; | 
 |  | 
 | static const struct snd_kcontrol_new scarlett2_peq_flt_switch_ctl = { | 
 | 	.iface = SNDRV_CTL_ELEM_IFACE_CARD, | 
 | 	.name = "", | 
 | 	.info = snd_ctl_boolean_mono_info, | 
 | 	.get  = scarlett2_peq_flt_switch_ctl_get, | 
 | 	.put  = scarlett2_peq_flt_switch_ctl_put, | 
 | }; | 
 |  | 
 | static int scarlett2_update_filter_values(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	const struct scarlett2_device_info *info = private->info; | 
 | 	int err, i, j, k, src_idx, dst_idx; | 
 | 	s32 peq_flt_values[SCARLETT2_DSP_SWITCH_MAX * | 
 | 			   SCARLETT2_PEQ_FLT_SLOTS_MAX * | 
 | 			   SCARLETT2_BIQUAD_COEFFS]; | 
 |  | 
 | 	if (!info->dsp_input_count) | 
 | 		return 0; | 
 |  | 
 | 	/* Get filter switch values */ | 
 | 	err = scarlett2_usb_get_config( | 
 | 		mixer, SCARLETT2_CONFIG_PRECOMP_FLT_SWITCH, | 
 | 		info->dsp_input_count, private->precomp_flt_switch); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	err = scarlett2_usb_get_config( | 
 | 		mixer, SCARLETT2_CONFIG_PEQ_FLT_SWITCH, | 
 | 		info->dsp_input_count * info->peq_flt_count, | 
 | 		private->peq_flt_switch); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	/* Get pre-compressor filter values directly */ | 
 | 	err = scarlett2_usb_get_config( | 
 | 		mixer, SCARLETT2_CONFIG_PRECOMP_FLT_PARAMS, | 
 | 		info->dsp_input_count * | 
 | 			info->precomp_flt_count * | 
 | 			SCARLETT2_BIQUAD_COEFFS, | 
 | 		private->precomp_flt_values); | 
 |  | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	/* PEQ filter values need to be copied via buffer because of | 
 | 	 * padding after peq_flt_count up to peq_flt_total_count | 
 | 	 */ | 
 | 	err = scarlett2_usb_get_config( | 
 | 		mixer, SCARLETT2_CONFIG_PEQ_FLT_PARAMS, | 
 | 		info->dsp_input_count * | 
 | 			info->peq_flt_total_count * | 
 | 			SCARLETT2_BIQUAD_COEFFS, | 
 | 		peq_flt_values); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	for (i = 0, dst_idx = 0; i < info->dsp_input_count; i++) { | 
 | 		src_idx = i * | 
 | 			  info->peq_flt_total_count * | 
 | 			  SCARLETT2_BIQUAD_COEFFS; | 
 | 		for (j = 0; j < info->peq_flt_count; j++) | 
 | 			for (k = 0; | 
 | 			     k < SCARLETT2_BIQUAD_COEFFS; | 
 | 			     k++, src_idx++, dst_idx++) | 
 | 				private->peq_flt_values[dst_idx] = | 
 | 					peq_flt_values[src_idx]; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int scarlett2_precomp_flt_ctl_get( | 
 | 	struct snd_kcontrol *kctl, struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct scarlett2_data *private = elem->head.mixer->private_data; | 
 | 	int i, idx; | 
 |  | 
 | 	for (i = 0, idx = elem->control * SCARLETT2_BIQUAD_COEFFS; | 
 | 	     i < SCARLETT2_BIQUAD_COEFFS; | 
 | 	     i++, idx++) | 
 | 		ucontrol->value.integer.value[i] = | 
 | 			private->precomp_flt_values[idx]; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int scarlett2_peq_flt_ctl_get( | 
 | 	struct snd_kcontrol *kctl, struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct scarlett2_data *private = elem->head.mixer->private_data; | 
 | 	int i, idx; | 
 |  | 
 | 	for (i = 0, idx = elem->control * SCARLETT2_BIQUAD_COEFFS; | 
 | 	     i < SCARLETT2_BIQUAD_COEFFS; | 
 | 	     i++, idx++) | 
 | 		ucontrol->value.integer.value[i] = | 
 | 			private->peq_flt_values[idx]; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int scarlett2_precomp_flt_ctl_put( | 
 | 	struct snd_kcontrol *kctl, struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct usb_mixer_interface *mixer = elem->head.mixer; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 |  | 
 | 	int index = elem->control * SCARLETT2_BIQUAD_COEFFS; | 
 | 	int i, oval, val, err; | 
 |  | 
 | 	mutex_lock(&private->data_mutex); | 
 |  | 
 | 	if (private->hwdep_in_use) { | 
 | 		err = -EBUSY; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	err = scarlett2_check_put_during_autogain(mixer); | 
 | 	if (err < 0) | 
 | 		goto unlock; | 
 |  | 
 | 	/* Check if any of the values have changed; if not, return */ | 
 | 	for (i = 0; i < SCARLETT2_BIQUAD_COEFFS; i++) { | 
 | 		oval = private->precomp_flt_values[index + i]; | 
 | 		val = ucontrol->value.integer.value[i]; | 
 | 		if (oval != val) | 
 | 			break; | 
 | 	} | 
 |  | 
 | 	if (i == SCARLETT2_BIQUAD_COEFFS) | 
 | 		goto unlock; | 
 |  | 
 | 	/* Update the values */ | 
 | 	for (i = 0; i < SCARLETT2_BIQUAD_COEFFS; i++) | 
 | 		private->precomp_flt_values[index + i] = | 
 | 			ucontrol->value.integer.value[i]; | 
 |  | 
 | 	/* Send change to the device */ | 
 | 	err = scarlett2_usb_set_data( | 
 | 		mixer, private->config_set->param_buf_addr, 1, index); | 
 | 	if (err < 0) | 
 | 		goto unlock; | 
 |  | 
 | 	err = scarlett2_usb_set_config_buf( | 
 | 		mixer, SCARLETT2_CONFIG_PRECOMP_FLT_PARAMS, | 
 | 		index, SCARLETT2_BIQUAD_COEFFS, | 
 | 		&private->precomp_flt_values[index]); | 
 |  | 
 | 	if (err == 0) | 
 | 		err = 1; | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&private->data_mutex); | 
 | 	return err; | 
 | } | 
 |  | 
 | static int scarlett2_peq_flt_ctl_put( | 
 | 	struct snd_kcontrol *kctl, struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct usb_mixer_interface *mixer = elem->head.mixer; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	const struct scarlett2_device_info *info = private->info; | 
 |  | 
 | 	int src_index = elem->control * SCARLETT2_BIQUAD_COEFFS; | 
 | 	int dst_index = ( | 
 | 		elem->control / | 
 | 		info->peq_flt_count * | 
 | 		info->peq_flt_total_count + | 
 | 		elem->control % info->peq_flt_count | 
 | 	) * SCARLETT2_BIQUAD_COEFFS; | 
 | 	int i, oval, val, err; | 
 |  | 
 | 	mutex_lock(&private->data_mutex); | 
 |  | 
 | 	if (private->hwdep_in_use) { | 
 | 		err = -EBUSY; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	err = scarlett2_check_put_during_autogain(mixer); | 
 | 	if (err < 0) | 
 | 		goto unlock; | 
 |  | 
 | 	/* Check if any of the values have changed; if not, return */ | 
 | 	for (i = 0; i < SCARLETT2_BIQUAD_COEFFS; i++) { | 
 | 		oval = private->peq_flt_values[src_index + i]; | 
 | 		val = ucontrol->value.integer.value[i]; | 
 | 		if (oval != val) | 
 | 			break; | 
 | 	} | 
 |  | 
 | 	if (i == SCARLETT2_BIQUAD_COEFFS) | 
 | 		goto unlock; | 
 |  | 
 | 	/* Update the values */ | 
 | 	for (i = 0; i < SCARLETT2_BIQUAD_COEFFS; i++) | 
 | 		private->peq_flt_values[src_index + i] = | 
 | 			ucontrol->value.integer.value[i]; | 
 |  | 
 | 	/* Send change to the device */ | 
 | 	err = scarlett2_usb_set_data( | 
 | 		mixer, private->config_set->param_buf_addr, 1, dst_index); | 
 | 	if (err < 0) | 
 | 		goto unlock; | 
 |  | 
 | 	err = scarlett2_usb_set_config_buf( | 
 | 		mixer, SCARLETT2_CONFIG_PEQ_FLT_PARAMS, | 
 | 		dst_index, SCARLETT2_BIQUAD_COEFFS, | 
 | 		&private->peq_flt_values[src_index]); | 
 |  | 
 | 	if (err == 0) | 
 | 		err = 1; | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&private->data_mutex); | 
 | 	return err; | 
 | } | 
 |  | 
 | static int scarlett2_flt_ctl_info( | 
 | 	struct snd_kcontrol *kctl, struct snd_ctl_elem_info *uinfo) | 
 | { | 
 | 	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; | 
 | 	uinfo->count = SCARLETT2_BIQUAD_COEFFS; | 
 | 	uinfo->value.integer.min = INT_MIN; | 
 | 	uinfo->value.integer.max = INT_MAX; | 
 | 	uinfo->value.integer.step = 1; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct snd_kcontrol_new scarlett2_precomp_flt_ctl = { | 
 | 	.iface = SNDRV_CTL_ELEM_IFACE_CARD, | 
 | 	.name = "", | 
 | 	.info = scarlett2_flt_ctl_info, | 
 | 	.get  = scarlett2_precomp_flt_ctl_get, | 
 | 	.put  = scarlett2_precomp_flt_ctl_put, | 
 | }; | 
 |  | 
 | static const struct snd_kcontrol_new scarlett2_peq_flt_ctl = { | 
 | 	.iface = SNDRV_CTL_ELEM_IFACE_CARD, | 
 | 	.name = "", | 
 | 	.info = scarlett2_flt_ctl_info, | 
 | 	.get  = scarlett2_peq_flt_ctl_get, | 
 | 	.put  = scarlett2_peq_flt_ctl_put, | 
 | }; | 
 |  | 
 | /*** Input Mute Switch Controls ***/ | 
 |  | 
 | static int scarlett2_update_input_mute(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	const struct scarlett2_device_info *info = private->info; | 
 |  | 
 | 	private->input_mute_updated = 0; | 
 |  | 
 | 	if (!info->mute_input_count) | 
 | 		return 0; | 
 |  | 
 | 	return scarlett2_usb_get_config( | 
 | 		mixer, SCARLETT2_CONFIG_INPUT_MUTE_SWITCH, | 
 | 		info->mute_input_count, private->input_mute_switch); | 
 | } | 
 |  | 
 | static int scarlett2_input_mute_ctl_get(struct snd_kcontrol *kctl, | 
 | 					struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct usb_mixer_interface *mixer = elem->head.mixer; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	int err = 0; | 
 |  | 
 | 	mutex_lock(&private->data_mutex); | 
 |  | 
 | 	if (private->hwdep_in_use) { | 
 | 		err = -EBUSY; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	if (private->input_mute_updated) { | 
 | 		err = scarlett2_update_input_mute(mixer); | 
 | 		if (err < 0) | 
 | 			goto unlock; | 
 | 	} | 
 | 	ucontrol->value.integer.value[0] = | 
 | 		private->input_mute_switch[elem->control]; | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&private->data_mutex); | 
 | 	return err; | 
 | } | 
 |  | 
 | static int scarlett2_input_mute_ctl_put(struct snd_kcontrol *kctl, | 
 | 					struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct usb_mixer_interface *mixer = elem->head.mixer; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 |  | 
 | 	int index = elem->control; | 
 | 	int oval, val, err; | 
 |  | 
 | 	mutex_lock(&private->data_mutex); | 
 |  | 
 | 	if (private->hwdep_in_use) { | 
 | 		err = -EBUSY; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	err = scarlett2_check_put_during_autogain(mixer); | 
 | 	if (err < 0) | 
 | 		goto unlock; | 
 |  | 
 | 	oval = private->input_mute_switch[index]; | 
 | 	val = ucontrol->value.integer.value[0]; | 
 |  | 
 | 	if (oval == val) | 
 | 		goto unlock; | 
 |  | 
 | 	private->input_mute_switch[index] = val; | 
 |  | 
 | 	/* Send switch change to the device */ | 
 | 	err = scarlett2_usb_set_config( | 
 | 		mixer, SCARLETT2_CONFIG_INPUT_MUTE_SWITCH, | 
 | 			index, val); | 
 | 	if (err == 0) | 
 | 		err = 1; | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&private->data_mutex); | 
 | 	return err; | 
 | } | 
 |  | 
 | static const struct snd_kcontrol_new scarlett2_input_mute_ctl = { | 
 | 	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, | 
 | 	.name = "", | 
 | 	.info = scarlett2_autogain_disables_ctl_info, | 
 | 	.get  = scarlett2_input_mute_ctl_get, | 
 | 	.put  = scarlett2_input_mute_ctl_put, | 
 | }; | 
 |  | 
 | /*** Phantom Switch Controls ***/ | 
 |  | 
 | static int scarlett2_update_input_phantom(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	const struct scarlett2_device_info *info = private->info; | 
 | 	int err; | 
 |  | 
 | 	private->input_phantom_updated = 0; | 
 |  | 
 | 	if (!info->phantom_count) | 
 | 		return 0; | 
 |  | 
 | 	err = scarlett2_usb_get_config( | 
 | 		mixer, SCARLETT2_CONFIG_PHANTOM_SWITCH, | 
 | 		info->phantom_count, private->phantom_switch); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	if (scarlett2_has_config_item(private, | 
 | 				      SCARLETT2_CONFIG_PHANTOM_PERSISTENCE)) { | 
 | 		err = scarlett2_usb_get_config( | 
 | 			mixer, SCARLETT2_CONFIG_PHANTOM_PERSISTENCE, | 
 | 			1, &private->phantom_persistence); | 
 | 		if (err < 0) | 
 | 			return err; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* Check if phantom power on the given input is currently changing state */ | 
 | static int scarlett2_phantom_is_switching( | 
 | 	struct scarlett2_data *private, int line_num) | 
 | { | 
 | 	const struct scarlett2_device_info *info = private->info; | 
 | 	int index = line_num / info->inputs_per_phantom; | 
 |  | 
 | 	return !!(private->phantom_switch[index] & 0x02); | 
 | } | 
 |  | 
 | /* Update autogain controls' access mode when phantom power changes state */ | 
 | static void scarlett2_phantom_update_access(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	const struct scarlett2_device_info *info = private->info; | 
 | 	int i; | 
 |  | 
 | 	/* Disable autogain controls if phantom power is changing state */ | 
 | 	for (i = 0; i < info->gain_input_count; i++) { | 
 | 		int val = !scarlett2_phantom_is_switching(private, i); | 
 |  | 
 | 		scarlett2_set_ctl_access(private->autogain_ctls[i], val); | 
 | 	} | 
 | } | 
 |  | 
 | /* Notify of access mode change for autogain which can't be enabled | 
 |  * while phantom power is changing. | 
 |  */ | 
 | static void scarlett2_phantom_notify_access(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct snd_card *card = mixer->chip->card; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	const struct scarlett2_device_info *info = private->info; | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < info->gain_input_count; i++) | 
 | 		snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_INFO, | 
 | 			       &private->autogain_ctls[i]->id); | 
 | } | 
 |  | 
 | /* Call scarlett2_update_input_phantom() and | 
 |  * scarlett2_phantom_update_access() if input_phantom_updated is set. | 
 |  */ | 
 | static int scarlett2_check_input_phantom_updated( | 
 | 	struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	int err; | 
 |  | 
 | 	if (!private->input_phantom_updated) | 
 | 		return 0; | 
 |  | 
 | 	err = scarlett2_update_input_phantom(mixer); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	scarlett2_phantom_update_access(mixer); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int scarlett2_phantom_ctl_get(struct snd_kcontrol *kctl, | 
 | 				     struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct usb_mixer_interface *mixer = elem->head.mixer; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	int err; | 
 |  | 
 | 	mutex_lock(&private->data_mutex); | 
 |  | 
 | 	if (private->hwdep_in_use) { | 
 | 		err = -EBUSY; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	err = scarlett2_check_input_phantom_updated(mixer); | 
 | 	if (err < 0) | 
 | 		goto unlock; | 
 |  | 
 | 	ucontrol->value.integer.value[0] = scarlett2_decode_muteable( | 
 | 		private->phantom_switch[elem->control]); | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&private->data_mutex); | 
 | 	return err; | 
 | } | 
 |  | 
 | static int scarlett2_phantom_ctl_put(struct snd_kcontrol *kctl, | 
 | 				     struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct usb_mixer_interface *mixer = elem->head.mixer; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	const struct scarlett2_device_info *info = private->info; | 
 |  | 
 | 	int index = elem->control; | 
 | 	int oval, val, err; | 
 |  | 
 | 	mutex_lock(&private->data_mutex); | 
 |  | 
 | 	if (private->hwdep_in_use) { | 
 | 		err = -EBUSY; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	err = scarlett2_check_put_during_autogain(mixer); | 
 | 	if (err < 0) | 
 | 		goto unlock; | 
 |  | 
 | 	oval = private->phantom_switch[index]; | 
 | 	val = !!ucontrol->value.integer.value[0]; | 
 |  | 
 | 	if (oval == val) | 
 | 		goto unlock; | 
 |  | 
 | 	private->phantom_switch[index] = val; | 
 |  | 
 | 	/* To set the Gen 4 muteable controls, bit 1 gets set */ | 
 | 	if (private->config_set->items[SCARLETT2_CONFIG_PHANTOM_SWITCH].mute) | 
 | 		val = (!val) | 0x02; | 
 |  | 
 | 	/* Send switch change to the device */ | 
 | 	err = scarlett2_usb_set_config(mixer, SCARLETT2_CONFIG_PHANTOM_SWITCH, | 
 | 				       index + info->phantom_first, val); | 
 | 	if (err == 0) | 
 | 		err = 1; | 
 |  | 
 | 	scarlett2_phantom_update_access(mixer); | 
 | 	scarlett2_phantom_notify_access(mixer); | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&private->data_mutex); | 
 | 	return err; | 
 | } | 
 |  | 
 | static const struct snd_kcontrol_new scarlett2_phantom_ctl = { | 
 | 	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, | 
 | 	.name = "", | 
 | 	.info = scarlett2_autogain_disables_ctl_info, | 
 | 	.get  = scarlett2_phantom_ctl_get, | 
 | 	.put  = scarlett2_phantom_ctl_put, | 
 | }; | 
 |  | 
 | /*** Phantom Persistence Control ***/ | 
 |  | 
 | static int scarlett2_phantom_persistence_ctl_get( | 
 | 	struct snd_kcontrol *kctl, struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct scarlett2_data *private = elem->head.mixer->private_data; | 
 |  | 
 | 	ucontrol->value.integer.value[0] = private->phantom_persistence; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int scarlett2_phantom_persistence_ctl_put( | 
 | 	struct snd_kcontrol *kctl, struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct usb_mixer_interface *mixer = elem->head.mixer; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 |  | 
 | 	int index = elem->control; | 
 | 	int oval, val, err = 0; | 
 |  | 
 | 	mutex_lock(&private->data_mutex); | 
 |  | 
 | 	if (private->hwdep_in_use) { | 
 | 		err = -EBUSY; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	oval = private->phantom_persistence; | 
 | 	val = !!ucontrol->value.integer.value[0]; | 
 |  | 
 | 	if (oval == val) | 
 | 		goto unlock; | 
 |  | 
 | 	private->phantom_persistence = val; | 
 |  | 
 | 	/* Send switch change to the device */ | 
 | 	err = scarlett2_usb_set_config( | 
 | 		mixer, SCARLETT2_CONFIG_PHANTOM_PERSISTENCE, index, val); | 
 | 	if (err == 0) | 
 | 		err = 1; | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&private->data_mutex); | 
 | 	return err; | 
 | } | 
 |  | 
 | static const struct snd_kcontrol_new scarlett2_phantom_persistence_ctl = { | 
 | 	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, | 
 | 	.name = "", | 
 | 	.info = snd_ctl_boolean_mono_info, | 
 | 	.get  = scarlett2_phantom_persistence_ctl_get, | 
 | 	.put  = scarlett2_phantom_persistence_ctl_put, | 
 | }; | 
 |  | 
 | /*** Speaker Switching Control ***/ | 
 |  | 
 | static int scarlett2_update_monitor_other(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	const struct scarlett2_device_info *info = private->info; | 
 | 	int err; | 
 |  | 
 | 	/* monitor_other_enable[0] enables speaker switching | 
 | 	 * monitor_other_enable[1] enables talkback | 
 | 	 */ | 
 | 	u8 monitor_other_enable[2]; | 
 |  | 
 | 	/* monitor_other_switch[0] activates the alternate speakers | 
 | 	 * monitor_other_switch[1] activates talkback | 
 | 	 */ | 
 | 	u8 monitor_other_switch[2]; | 
 |  | 
 | 	private->monitor_other_updated = 0; | 
 |  | 
 | 	/* if it doesn't do speaker switching then it also doesn't do | 
 | 	 * talkback | 
 | 	 */ | 
 | 	if (!info->has_speaker_switching) | 
 | 		return 0; | 
 |  | 
 | 	err = scarlett2_usb_get_config( | 
 | 		mixer, SCARLETT2_CONFIG_MONITOR_OTHER_ENABLE, | 
 | 		2, monitor_other_enable); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	err = scarlett2_usb_get_config( | 
 | 		mixer, SCARLETT2_CONFIG_MONITOR_OTHER_SWITCH, | 
 | 		2, monitor_other_switch); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	if (!monitor_other_enable[0]) | 
 | 		private->speaker_switching_switch = 0; | 
 | 	else | 
 | 		private->speaker_switching_switch = monitor_other_switch[0] + 1; | 
 |  | 
 | 	if (info->has_talkback) { | 
 | 		u16 bitmap; | 
 | 		int i; | 
 |  | 
 | 		if (!monitor_other_enable[1]) | 
 | 			private->talkback_switch = 0; | 
 | 		else | 
 | 			private->talkback_switch = monitor_other_switch[1] + 1; | 
 |  | 
 | 		err = scarlett2_usb_get_config(mixer, | 
 | 					       SCARLETT2_CONFIG_TALKBACK_MAP, | 
 | 					       1, &bitmap); | 
 | 		if (err < 0) | 
 | 			return err; | 
 | 		for (i = 0; i < private->num_mix_out; i++, bitmap >>= 1) | 
 | 			private->talkback_map[i] = bitmap & 1; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int scarlett2_speaker_switch_enum_ctl_info( | 
 | 	struct snd_kcontrol *kctl, struct snd_ctl_elem_info *uinfo) | 
 | { | 
 | 	static const char *const values[3] = { | 
 | 		"Off", "Main", "Alt" | 
 | 	}; | 
 |  | 
 | 	return snd_ctl_enum_info(uinfo, 1, 3, values); | 
 | } | 
 |  | 
 | static int scarlett2_speaker_switch_enum_ctl_get( | 
 | 	struct snd_kcontrol *kctl, struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct usb_mixer_interface *mixer = elem->head.mixer; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	int err = 0; | 
 |  | 
 | 	mutex_lock(&private->data_mutex); | 
 |  | 
 | 	if (private->hwdep_in_use) { | 
 | 		err = -EBUSY; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	if (private->monitor_other_updated) { | 
 | 		err = scarlett2_update_monitor_other(mixer); | 
 | 		if (err < 0) | 
 | 			goto unlock; | 
 | 	} | 
 | 	ucontrol->value.enumerated.item[0] = private->speaker_switching_switch; | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&private->data_mutex); | 
 | 	return err; | 
 | } | 
 |  | 
 | /* when speaker switching gets enabled, switch the main/alt speakers | 
 |  * to HW volume and disable those controls | 
 |  */ | 
 | static int scarlett2_speaker_switch_enable(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct snd_card *card = mixer->chip->card; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	int i, err; | 
 |  | 
 | 	for (i = 0; i < 4; i++) { | 
 | 		int index = line_out_remap(private, i); | 
 |  | 
 | 		/* switch the main/alt speakers to HW volume */ | 
 | 		if (!private->vol_sw_hw_switch[index]) { | 
 | 			err = scarlett2_sw_hw_change(private->mixer, i, 1); | 
 | 			if (err < 0) | 
 | 				return err; | 
 | 		} | 
 |  | 
 | 		/* disable the line out SW/HW switch */ | 
 | 		scarlett2_sw_hw_ctl_ro(private, i); | 
 | 		snd_ctl_notify(card, | 
 | 			       SNDRV_CTL_EVENT_MASK_VALUE | | 
 | 				 SNDRV_CTL_EVENT_MASK_INFO, | 
 | 			       &private->sw_hw_ctls[i]->id); | 
 | 	} | 
 |  | 
 | 	/* when the next monitor-other notify comes in, update the mux | 
 | 	 * configuration | 
 | 	 */ | 
 | 	private->speaker_switching_switched = 1; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* when speaker switching gets disabled, reenable the hw/sw controls | 
 |  * and invalidate the routing | 
 |  */ | 
 | static void scarlett2_speaker_switch_disable(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct snd_card *card = mixer->chip->card; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	int i; | 
 |  | 
 | 	/* enable the line out SW/HW switch */ | 
 | 	for (i = 0; i < 4; i++) { | 
 | 		scarlett2_sw_hw_ctl_rw(private, i); | 
 | 		snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_INFO, | 
 | 			       &private->sw_hw_ctls[i]->id); | 
 | 	} | 
 |  | 
 | 	/* when the next monitor-other notify comes in, update the mux | 
 | 	 * configuration | 
 | 	 */ | 
 | 	private->speaker_switching_switched = 1; | 
 | } | 
 |  | 
 | static int scarlett2_speaker_switch_enum_ctl_put( | 
 | 	struct snd_kcontrol *kctl, struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct usb_mixer_interface *mixer = elem->head.mixer; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 |  | 
 | 	int oval, val, err = 0; | 
 |  | 
 | 	mutex_lock(&private->data_mutex); | 
 |  | 
 | 	if (private->hwdep_in_use) { | 
 | 		err = -EBUSY; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	oval = private->speaker_switching_switch; | 
 | 	val = min(ucontrol->value.enumerated.item[0], 2U); | 
 |  | 
 | 	if (oval == val) | 
 | 		goto unlock; | 
 |  | 
 | 	private->speaker_switching_switch = val; | 
 |  | 
 | 	/* enable/disable speaker switching */ | 
 | 	err = scarlett2_usb_set_config( | 
 | 		mixer, SCARLETT2_CONFIG_MONITOR_OTHER_ENABLE, | 
 | 		0, !!val); | 
 | 	if (err < 0) | 
 | 		goto unlock; | 
 |  | 
 | 	/* if speaker switching is enabled, select main or alt */ | 
 | 	err = scarlett2_usb_set_config( | 
 | 		mixer, SCARLETT2_CONFIG_MONITOR_OTHER_SWITCH, | 
 | 		0, val == 2); | 
 | 	if (err < 0) | 
 | 		goto unlock; | 
 |  | 
 | 	/* update controls if speaker switching gets enabled or disabled */ | 
 | 	if (!oval && val) | 
 | 		err = scarlett2_speaker_switch_enable(mixer); | 
 | 	else if (oval && !val) | 
 | 		scarlett2_speaker_switch_disable(mixer); | 
 |  | 
 | 	if (err == 0) | 
 | 		err = 1; | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&private->data_mutex); | 
 | 	return err; | 
 | } | 
 |  | 
 | static const struct snd_kcontrol_new scarlett2_speaker_switch_enum_ctl = { | 
 | 	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, | 
 | 	.name = "", | 
 | 	.info = scarlett2_speaker_switch_enum_ctl_info, | 
 | 	.get  = scarlett2_speaker_switch_enum_ctl_get, | 
 | 	.put  = scarlett2_speaker_switch_enum_ctl_put, | 
 | }; | 
 |  | 
 | static int scarlett2_add_speaker_switch_ctl(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	const struct scarlett2_device_info *info = private->info; | 
 |  | 
 | 	if (!info->has_speaker_switching) | 
 | 		return 0; | 
 |  | 
 | 	return scarlett2_add_new_ctl( | 
 | 		mixer, &scarlett2_speaker_switch_enum_ctl, | 
 | 		0, 1, "Speaker Switching Playback Enum", | 
 | 		&private->speaker_switching_ctl); | 
 | } | 
 |  | 
 | /*** Talkback and Talkback Map Controls ***/ | 
 |  | 
 | static int scarlett2_talkback_enum_ctl_info( | 
 | 	struct snd_kcontrol *kctl, struct snd_ctl_elem_info *uinfo) | 
 | { | 
 | 	static const char *const values[3] = { | 
 | 		"Disabled", "Off", "On" | 
 | 	}; | 
 |  | 
 | 	return snd_ctl_enum_info(uinfo, 1, 3, values); | 
 | } | 
 |  | 
 | static int scarlett2_talkback_enum_ctl_get( | 
 | 	struct snd_kcontrol *kctl, struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct usb_mixer_interface *mixer = elem->head.mixer; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	int err = 0; | 
 |  | 
 | 	mutex_lock(&private->data_mutex); | 
 |  | 
 | 	if (private->hwdep_in_use) { | 
 | 		err = -EBUSY; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	if (private->monitor_other_updated) { | 
 | 		err = scarlett2_update_monitor_other(mixer); | 
 | 		if (err < 0) | 
 | 			goto unlock; | 
 | 	} | 
 | 	ucontrol->value.enumerated.item[0] = private->talkback_switch; | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&private->data_mutex); | 
 | 	return err; | 
 | } | 
 |  | 
 | static int scarlett2_talkback_enum_ctl_put( | 
 | 	struct snd_kcontrol *kctl, struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct usb_mixer_interface *mixer = elem->head.mixer; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 |  | 
 | 	int oval, val, err = 0; | 
 |  | 
 | 	mutex_lock(&private->data_mutex); | 
 |  | 
 | 	if (private->hwdep_in_use) { | 
 | 		err = -EBUSY; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	oval = private->talkback_switch; | 
 | 	val = min(ucontrol->value.enumerated.item[0], 2U); | 
 |  | 
 | 	if (oval == val) | 
 | 		goto unlock; | 
 |  | 
 | 	private->talkback_switch = val; | 
 |  | 
 | 	/* enable/disable talkback */ | 
 | 	err = scarlett2_usb_set_config( | 
 | 		mixer, SCARLETT2_CONFIG_MONITOR_OTHER_ENABLE, | 
 | 		1, !!val); | 
 | 	if (err < 0) | 
 | 		goto unlock; | 
 |  | 
 | 	/* if talkback is enabled, select main or alt */ | 
 | 	err = scarlett2_usb_set_config( | 
 | 		mixer, SCARLETT2_CONFIG_MONITOR_OTHER_SWITCH, | 
 | 		1, val == 2); | 
 | 	if (err == 0) | 
 | 		err = 1; | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&private->data_mutex); | 
 | 	return err; | 
 | } | 
 |  | 
 | static const struct snd_kcontrol_new scarlett2_talkback_enum_ctl = { | 
 | 	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, | 
 | 	.name = "", | 
 | 	.info = scarlett2_talkback_enum_ctl_info, | 
 | 	.get  = scarlett2_talkback_enum_ctl_get, | 
 | 	.put  = scarlett2_talkback_enum_ctl_put, | 
 | }; | 
 |  | 
 | static int scarlett2_talkback_map_ctl_get( | 
 | 	struct snd_kcontrol *kctl, struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct usb_mixer_interface *mixer = elem->head.mixer; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	int index = elem->control; | 
 |  | 
 | 	ucontrol->value.integer.value[0] = private->talkback_map[index]; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int scarlett2_talkback_map_ctl_put( | 
 | 	struct snd_kcontrol *kctl, struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct usb_mixer_interface *mixer = elem->head.mixer; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	int index = elem->control; | 
 | 	int oval, val, err = 0, i; | 
 | 	u16 bitmap = 0; | 
 |  | 
 | 	mutex_lock(&private->data_mutex); | 
 |  | 
 | 	if (private->hwdep_in_use) { | 
 | 		err = -EBUSY; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	oval = private->talkback_map[index]; | 
 | 	val = !!ucontrol->value.integer.value[0]; | 
 |  | 
 | 	if (oval == val) | 
 | 		goto unlock; | 
 |  | 
 | 	private->talkback_map[index] = val; | 
 |  | 
 | 	for (i = 0; i < private->num_mix_out; i++) | 
 | 		bitmap |= private->talkback_map[i] << i; | 
 |  | 
 | 	/* Send updated bitmap to the device */ | 
 | 	err = scarlett2_usb_set_config(mixer, SCARLETT2_CONFIG_TALKBACK_MAP, | 
 | 				       0, bitmap); | 
 | 	if (err == 0) | 
 | 		err = 1; | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&private->data_mutex); | 
 | 	return err; | 
 | } | 
 |  | 
 | static const struct snd_kcontrol_new scarlett2_talkback_map_ctl = { | 
 | 	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, | 
 | 	.name = "", | 
 | 	.info = snd_ctl_boolean_mono_info, | 
 | 	.get  = scarlett2_talkback_map_ctl_get, | 
 | 	.put  = scarlett2_talkback_map_ctl_put, | 
 | }; | 
 |  | 
 | static int scarlett2_add_talkback_ctls(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	const struct scarlett2_device_info *info = private->info; | 
 | 	int err, i; | 
 | 	char s[SNDRV_CTL_ELEM_ID_NAME_MAXLEN]; | 
 |  | 
 | 	if (!info->has_talkback) | 
 | 		return 0; | 
 |  | 
 | 	err = scarlett2_add_new_ctl( | 
 | 		mixer, &scarlett2_talkback_enum_ctl, | 
 | 		0, 1, "Talkback Playback Enum", | 
 | 		&private->talkback_ctl); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	for (i = 0; i < private->num_mix_out; i++) { | 
 | 		snprintf(s, sizeof(s), | 
 | 			 "Talkback Mix %c Playback Switch", i + 'A'); | 
 | 		err = scarlett2_add_new_ctl(mixer, &scarlett2_talkback_map_ctl, | 
 | 					    i, 1, s, NULL); | 
 | 		if (err < 0) | 
 | 			return err; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /*** Dim/Mute Controls ***/ | 
 |  | 
 | static int scarlett2_dim_mute_ctl_get(struct snd_kcontrol *kctl, | 
 | 				      struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct usb_mixer_interface *mixer = elem->head.mixer; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	int err = 0; | 
 |  | 
 | 	mutex_lock(&private->data_mutex); | 
 |  | 
 | 	if (private->hwdep_in_use) { | 
 | 		err = -EBUSY; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	if (private->dim_mute_updated) { | 
 | 		err = scarlett2_update_dim_mute(mixer); | 
 | 		if (err < 0) | 
 | 			goto unlock; | 
 | 	} | 
 | 	ucontrol->value.integer.value[0] = private->dim_mute[elem->control]; | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&private->data_mutex); | 
 | 	return err; | 
 | } | 
 |  | 
 | static int scarlett2_dim_mute_ctl_put(struct snd_kcontrol *kctl, | 
 | 				      struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct usb_mixer_interface *mixer = elem->head.mixer; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	int index = elem->control; | 
 | 	int oval, val, err = 0, i; | 
 |  | 
 | 	mutex_lock(&private->data_mutex); | 
 |  | 
 | 	if (private->hwdep_in_use) { | 
 | 		err = -EBUSY; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	oval = private->dim_mute[index]; | 
 | 	val = !!ucontrol->value.integer.value[0]; | 
 |  | 
 | 	if (oval == val) | 
 | 		goto unlock; | 
 |  | 
 | 	private->dim_mute[index] = val; | 
 |  | 
 | 	/* Send switch change to the device */ | 
 | 	err = scarlett2_usb_set_config(mixer, SCARLETT2_CONFIG_DIM_MUTE, | 
 | 				       index, val); | 
 | 	if (err == 0) | 
 | 		err = 1; | 
 |  | 
 | 	if (index == SCARLETT2_BUTTON_MUTE) | 
 | 		for (i = 0; i < private->num_line_out; i++) { | 
 | 			int line_index = line_out_remap(private, i); | 
 |  | 
 | 			if (private->vol_sw_hw_switch[line_index]) { | 
 | 				private->mute_switch[line_index] = val; | 
 | 				snd_ctl_notify(mixer->chip->card, | 
 | 					       SNDRV_CTL_EVENT_MASK_VALUE, | 
 | 					       &private->mute_ctls[i]->id); | 
 | 			} | 
 | 		} | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&private->data_mutex); | 
 | 	return err; | 
 | } | 
 |  | 
 | static const struct snd_kcontrol_new scarlett2_dim_mute_ctl = { | 
 | 	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, | 
 | 	.name = "", | 
 | 	.info = snd_ctl_boolean_mono_info, | 
 | 	.get  = scarlett2_dim_mute_ctl_get, | 
 | 	.put  = scarlett2_dim_mute_ctl_put | 
 | }; | 
 |  | 
 | /*** Create the analogue output controls ***/ | 
 |  | 
 | static int scarlett2_add_line_out_ctls(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	const struct scarlett2_device_info *info = private->info; | 
 | 	int err, i; | 
 | 	char s[SNDRV_CTL_ELEM_ID_NAME_MAXLEN]; | 
 |  | 
 | 	/* Add R/O HW volume control */ | 
 | 	if (scarlett2_has_config_item(private, | 
 | 				      SCARLETT2_CONFIG_MASTER_VOLUME)) { | 
 | 		snprintf(s, sizeof(s), "Master HW Playback Volume"); | 
 | 		err = scarlett2_add_new_ctl(mixer, | 
 | 					    &scarlett2_master_volume_ctl, | 
 | 					    0, 1, s, &private->master_vol_ctl); | 
 | 		if (err < 0) | 
 | 			return err; | 
 | 	} | 
 |  | 
 | 	/* Add R/O headphone volume control */ | 
 | 	if (scarlett2_has_config_item(private, | 
 | 				      SCARLETT2_CONFIG_HEADPHONE_VOLUME)) { | 
 | 		snprintf(s, sizeof(s), "Headphone Playback Volume"); | 
 | 		err = scarlett2_add_new_ctl(mixer, | 
 | 					    &scarlett2_headphone_volume_ctl, | 
 | 					    0, 1, s, | 
 | 					    &private->headphone_vol_ctl); | 
 | 		if (err < 0) | 
 | 			return err; | 
 | 	} | 
 |  | 
 | 	/* Remaining controls are only applicable if the device | 
 | 	 * has per-channel line-out volume controls. | 
 | 	 */ | 
 | 	if (!scarlett2_has_config_item(private, | 
 | 				       SCARLETT2_CONFIG_LINE_OUT_VOLUME)) | 
 | 		return 0; | 
 |  | 
 | 	/* Add volume controls */ | 
 | 	for (i = 0; i < private->num_line_out; i++) { | 
 | 		int index = line_out_remap(private, i); | 
 |  | 
 | 		/* Fader */ | 
 | 		if (info->line_out_descrs[i]) | 
 | 			snprintf(s, sizeof(s), | 
 | 				 "Line %02d (%s) Playback Volume", | 
 | 				 i + 1, info->line_out_descrs[i]); | 
 | 		else | 
 | 			snprintf(s, sizeof(s), | 
 | 				 "Line %02d Playback Volume", | 
 | 				 i + 1); | 
 | 		err = scarlett2_add_new_ctl(mixer, | 
 | 					    &scarlett2_line_out_volume_ctl, | 
 | 					    i, 1, s, &private->vol_ctls[i]); | 
 | 		if (err < 0) | 
 | 			return err; | 
 |  | 
 | 		/* Mute Switch */ | 
 | 		snprintf(s, sizeof(s), | 
 | 			 "Line %02d Mute Playback Switch", | 
 | 			 i + 1); | 
 | 		err = scarlett2_add_new_ctl(mixer, | 
 | 					    &scarlett2_mute_ctl, | 
 | 					    i, 1, s, | 
 | 					    &private->mute_ctls[i]); | 
 | 		if (err < 0) | 
 | 			return err; | 
 |  | 
 | 		/* SW/HW Switch */ | 
 | 		if (scarlett2_has_config_item(private, | 
 | 					      SCARLETT2_CONFIG_SW_HW_SWITCH)) { | 
 |  | 
 | 			/* Make the fader and mute controls read-only if the | 
 | 			 * SW/HW switch is set to HW | 
 | 			 */ | 
 | 			if (private->vol_sw_hw_switch[index]) | 
 | 				scarlett2_vol_ctl_set_writable(mixer, i, 0); | 
 |  | 
 | 			scnprintf(s, sizeof(s), | 
 | 				  "Line Out %02d Volume Control Playback Enum", | 
 | 				  i + 1); | 
 | 			err = scarlett2_add_new_ctl(mixer, | 
 | 						    &scarlett2_sw_hw_enum_ctl, | 
 | 						    i, 1, s, | 
 | 						    &private->sw_hw_ctls[i]); | 
 | 			if (err < 0) | 
 | 				return err; | 
 |  | 
 | 			/* Make the switch read-only if the line is | 
 | 			 * involved in speaker switching | 
 | 			 */ | 
 | 			if (private->speaker_switching_switch && i < 4) | 
 | 				scarlett2_sw_hw_ctl_ro(private, i); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* Add dim/mute controls */ | 
 | 	if (scarlett2_has_config_item(private, SCARLETT2_CONFIG_DIM_MUTE)) | 
 | 		for (i = 0; i < SCARLETT2_DIM_MUTE_COUNT; i++) { | 
 | 			err = scarlett2_add_new_ctl( | 
 | 				mixer, &scarlett2_dim_mute_ctl, | 
 | 				i, 1, scarlett2_dim_mute_names[i], | 
 | 				&private->dim_mute_ctls[i]); | 
 | 			if (err < 0) | 
 | 				return err; | 
 | 		} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /*** Create the analogue input controls ***/ | 
 |  | 
 | static int scarlett2_add_dsp_ctls(struct usb_mixer_interface *mixer, int i) | 
 | { | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	const struct scarlett2_device_info *info = private->info; | 
 | 	int j, err; | 
 | 	char s[SNDRV_CTL_ELEM_ID_NAME_MAXLEN]; | 
 | 	const char *compr_fmt = "Line In %d Compressor %s"; | 
 | 	const char *flt_switch_fmt = "Line In %d %s Filter Enable"; | 
 | 	const char *flt_fmt = "Line In %d %s Coefficients %d"; | 
 |  | 
 | 	/* Add compressor controls */ | 
 | 	for (j = 0; j < SCARLETT2_COMPRESSOR_PARAM_COUNT; j++) { | 
 | 		const struct compressor_param *param = &compressor_params[j]; | 
 | 		int idx = i * SCARLETT2_COMPRESSOR_PARAM_COUNT + j; | 
 |  | 
 | 		scnprintf(s, sizeof(s), compr_fmt, i + 1, param->name); | 
 | 		err = scarlett2_add_new_ctl( | 
 | 			mixer, &scarlett2_compressor_ctl, | 
 | 			i * SCARLETT2_COMPRESSOR_PARAM_COUNT + j, | 
 | 			1, s, &private->compressor_ctls[idx]); | 
 | 		if (err < 0) | 
 | 			return err; | 
 | 	} | 
 |  | 
 | 	/* Add filter enable controls */ | 
 | 	scnprintf(s, sizeof(s), flt_switch_fmt, i + 1, "Pre-Comp"); | 
 | 	err = scarlett2_add_new_ctl( | 
 | 		mixer, &scarlett2_precomp_flt_switch_ctl, | 
 | 		i, 1, s, &private->precomp_flt_switch_ctls[i]); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	scnprintf(s, sizeof(s), flt_switch_fmt, i + 1, "PEQ"); | 
 | 	err = scarlett2_add_new_ctl( | 
 | 		mixer, &scarlett2_peq_flt_switch_ctl, | 
 | 		i, 1, s, &private->peq_flt_switch_ctls[i]); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	/* Add filter coefficient controls */ | 
 | 	for (j = 0; j < info->precomp_flt_count; j++) { | 
 | 		scnprintf(s, sizeof(s), flt_fmt, i + 1, "Pre-Comp", j + 1); | 
 | 		err = scarlett2_add_new_ctl( | 
 | 			mixer, &scarlett2_precomp_flt_ctl, | 
 | 			i * info->precomp_flt_count + j, | 
 | 			1, s, &private->precomp_flt_switch_ctls[j]); | 
 | 		if (err < 0) | 
 | 			return err; | 
 | 	} | 
 |  | 
 | 	for (j = 0; j < info->peq_flt_count; j++) { | 
 | 		scnprintf(s, sizeof(s), flt_fmt, i + 1, "PEQ", j + 1); | 
 | 		err = scarlett2_add_new_ctl( | 
 | 			mixer, &scarlett2_peq_flt_ctl, | 
 | 			i * info->peq_flt_count + j, | 
 | 			1, s, &private->peq_flt_switch_ctls[j]); | 
 | 		if (err < 0) | 
 | 			return err; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int scarlett2_add_line_in_ctls(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	const struct scarlett2_device_info *info = private->info; | 
 | 	int err, i; | 
 | 	char s[SNDRV_CTL_ELEM_ID_NAME_MAXLEN]; | 
 | 	const char *fmt = "Line In %d %s Capture %s"; | 
 | 	const char *fmt2 = "Line In %d-%d %s Capture %s"; | 
 |  | 
 | 	/* Add input level (line/inst) controls */ | 
 | 	for (i = 0; i < info->level_input_count; i++) { | 
 | 		scnprintf(s, sizeof(s), fmt, i + 1 + info->level_input_first, | 
 | 			  "Level", "Enum"); | 
 | 		err = scarlett2_add_new_ctl(mixer, &scarlett2_level_enum_ctl, | 
 | 					    i, 1, s, &private->level_ctls[i]); | 
 | 		if (err < 0) | 
 | 			return err; | 
 | 	} | 
 |  | 
 | 	/* Add input pad controls */ | 
 | 	for (i = 0; i < info->pad_input_count; i++) { | 
 | 		scnprintf(s, sizeof(s), fmt, i + 1, "Pad", "Switch"); | 
 | 		err = scarlett2_add_new_ctl(mixer, &scarlett2_pad_ctl, | 
 | 					    i, 1, s, &private->pad_ctls[i]); | 
 | 		if (err < 0) | 
 | 			return err; | 
 | 	} | 
 |  | 
 | 	/* Add input air controls */ | 
 | 	for (i = 0; i < info->air_input_count; i++) { | 
 | 		scnprintf(s, sizeof(s), fmt, i + 1 + info->air_input_first, | 
 | 			  "Air", info->air_option ? "Enum" : "Switch"); | 
 | 		err = scarlett2_add_new_ctl( | 
 | 			mixer, &scarlett2_air_ctl[info->air_option], | 
 | 			i, 1, s, &private->air_ctls[i]); | 
 | 		if (err < 0) | 
 | 			return err; | 
 | 	} | 
 |  | 
 | 	/* Add input DSP controls */ | 
 | 	for (i = 0; i < info->dsp_input_count; i++) { | 
 | 		scnprintf(s, sizeof(s), fmt, i + 1, "DSP", "Switch"); | 
 | 		err = scarlett2_add_new_ctl(mixer, &scarlett2_dsp_ctl, | 
 | 					    i, 1, s, &private->dsp_ctls[i]); | 
 | 		if (err < 0) | 
 | 			return err; | 
 |  | 
 | 		err = scarlett2_add_dsp_ctls(mixer, i); | 
 | 		if (err < 0) | 
 | 			return err; | 
 | 	} | 
 |  | 
 | 	/* Add input mute controls */ | 
 | 	for (i = 0; i < info->mute_input_count; i++) { | 
 | 		scnprintf(s, sizeof(s), fmt, i + 1, "Mute", "Switch"); | 
 | 		err = scarlett2_add_new_ctl( | 
 | 			mixer, &scarlett2_input_mute_ctl, | 
 | 			i, 1, s, &private->input_mute_ctls[i]); | 
 | 		if (err < 0) | 
 | 			return err; | 
 | 	} | 
 |  | 
 | 	/* Add input phantom controls */ | 
 | 	if (info->inputs_per_phantom == 1) { | 
 | 		for (i = 0; i < info->phantom_count; i++) { | 
 | 			scnprintf(s, sizeof(s), fmt, | 
 | 				  i + 1 + info->phantom_first, | 
 | 				  "Phantom Power", "Switch"); | 
 | 			err = scarlett2_add_new_ctl( | 
 | 				mixer, &scarlett2_phantom_ctl, | 
 | 				i, 1, s, &private->phantom_ctls[i]); | 
 | 			if (err < 0) | 
 | 				return err; | 
 | 		} | 
 | 	} else if (info->inputs_per_phantom > 1) { | 
 | 		for (i = 0; i < info->phantom_count; i++) { | 
 | 			int from = i * info->inputs_per_phantom + 1; | 
 | 			int to = (i + 1) * info->inputs_per_phantom; | 
 |  | 
 | 			scnprintf(s, sizeof(s), fmt2, from, to, | 
 | 				  "Phantom Power", "Switch"); | 
 | 			err = scarlett2_add_new_ctl( | 
 | 				mixer, &scarlett2_phantom_ctl, | 
 | 				i, 1, s, &private->phantom_ctls[i]); | 
 | 			if (err < 0) | 
 | 				return err; | 
 | 		} | 
 | 	} | 
 | 	if (info->phantom_count && | 
 | 	    scarlett2_has_config_item(private, | 
 | 				      SCARLETT2_CONFIG_PHANTOM_PERSISTENCE)) { | 
 | 		err = scarlett2_add_new_ctl( | 
 | 			mixer, &scarlett2_phantom_persistence_ctl, 0, 1, | 
 | 			"Phantom Power Persistence Capture Switch", NULL); | 
 | 		if (err < 0) | 
 | 			return err; | 
 | 	} | 
 |  | 
 | 	/* Add input select/link controls */ | 
 | 	if (scarlett2_has_config_item(private, | 
 | 				      SCARLETT2_CONFIG_INPUT_SELECT_SWITCH)) { | 
 | 		err = scarlett2_add_new_ctl( | 
 | 			mixer, &scarlett2_input_select_ctl, 0, 1, | 
 | 			"Input Select Capture Enum", | 
 | 			&private->input_select_ctl); | 
 | 		if (err < 0) | 
 | 			return err; | 
 | 	} | 
 |  | 
 | 	if (scarlett2_has_config_item(private, | 
 | 				      SCARLETT2_CONFIG_INPUT_LINK_SWITCH)) { | 
 | 		for (i = 0; i < info->gain_input_count; i++) { | 
 | 			scnprintf(s, sizeof(s), | 
 | 				  "Line In %d Link Capture Switch", i + 1); | 
 | 			err = scarlett2_add_new_ctl( | 
 | 				mixer, &scarlett2_input_link_ctl, | 
 | 				i, 1, s, &private->input_link_ctls[i]); | 
 | 			if (err < 0) | 
 | 				return err; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* Add software-controllable input gain controls */ | 
 | 	for (i = 0; i < info->gain_input_count; i++) { | 
 | 		scnprintf(s, sizeof(s), fmt, i + 1, | 
 | 			  "Gain", "Volume"); | 
 | 		err = scarlett2_add_new_ctl( | 
 | 			mixer, &scarlett2_input_gain_ctl, | 
 | 			i, 1, s, &private->input_gain_ctls[i]); | 
 | 		if (err < 0) | 
 | 			return err; | 
 | 		private->input_gain_ctls[i]->tlv.p = | 
 | 			private->config_set->input_gain_tlv; | 
 |  | 
 | 		scnprintf(s, sizeof(s), fmt, i + 1, | 
 | 			  "Autogain", "Switch"); | 
 | 		err = scarlett2_add_new_ctl( | 
 | 			mixer, &scarlett2_autogain_switch_ctl, | 
 | 			i, 1, s, &private->autogain_ctls[i]); | 
 | 		if (err < 0) | 
 | 			return err; | 
 |  | 
 | 		scnprintf(s, sizeof(s), fmt, i + 1, | 
 | 			  "Autogain Status", "Enum"); | 
 | 		err = scarlett2_add_new_ctl( | 
 | 			mixer, &scarlett2_autogain_status_ctl, | 
 | 			i, 1, s, &private->autogain_status_ctls[i]); | 
 | 	} | 
 |  | 
 | 	/* Add autogain target controls */ | 
 | 	for (i = 0; i < SCARLETT2_AG_TARGET_COUNT; i++) | 
 | 		if (scarlett2_has_config_item(private, | 
 | 					      scarlett2_ag_target_configs[i])) { | 
 |  | 
 | 			scnprintf(s, sizeof(s), "Autogain %s Target", | 
 | 				  scarlett2_ag_target_names[i]); | 
 | 			err = scarlett2_add_new_ctl( | 
 | 				mixer, &scarlett2_ag_target_ctl, | 
 | 				i, 1, s, &private->ag_target_ctls[i]); | 
 | 			if (err < 0) | 
 | 				return err; | 
 | 		} | 
 |  | 
 | 	/* Add safe-mode input switch controls */ | 
 | 	for (i = 0; i < info->safe_input_count; i++) { | 
 | 		scnprintf(s, sizeof(s), fmt, i + 1, | 
 | 			  "Safe", "Switch"); | 
 | 		err = scarlett2_add_new_ctl( | 
 | 			mixer, &scarlett2_safe_ctl, | 
 | 			i, 1, s, &private->safe_ctls[i]); | 
 | 		if (err < 0) | 
 | 			return err; | 
 | 	} | 
 |  | 
 | 	/* Add PCM Input Switch control */ | 
 | 	if (scarlett2_has_config_item(private, | 
 | 				      SCARLETT2_CONFIG_PCM_INPUT_SWITCH)) { | 
 | 		err = scarlett2_add_new_ctl( | 
 | 			mixer, &scarlett2_pcm_input_switch_ctl, 0, 1, | 
 | 			"PCM Input Capture Switch", | 
 | 			&private->pcm_input_switch_ctl); | 
 | 		if (err < 0) | 
 | 			return err; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /*** Mixer Volume Controls ***/ | 
 |  | 
 | static int scarlett2_update_mix(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	int i, err; | 
 |  | 
 | 	private->mix_updated = 0; | 
 |  | 
 | 	for (i = 0; i < private->num_mix_out; i++) { | 
 | 		err = scarlett2_usb_get_mix(mixer, i); | 
 | 		if (err < 0) | 
 | 			return err; | 
 | 	} | 
 |  | 
 | 	return 1; | 
 | } | 
 |  | 
 | static int scarlett2_mixer_ctl_info(struct snd_kcontrol *kctl, | 
 | 				    struct snd_ctl_elem_info *uinfo) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 |  | 
 | 	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; | 
 | 	uinfo->count = elem->channels; | 
 | 	uinfo->value.integer.min = 0; | 
 | 	uinfo->value.integer.max = SCARLETT2_MIXER_MAX_VALUE; | 
 | 	uinfo->value.integer.step = 1; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int scarlett2_mixer_ctl_get(struct snd_kcontrol *kctl, | 
 | 				   struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct usb_mixer_interface *mixer = elem->head.mixer; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	int err = 0; | 
 |  | 
 | 	mutex_lock(&private->data_mutex); | 
 |  | 
 | 	if (private->hwdep_in_use) { | 
 | 		err = -EBUSY; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	if (private->mix_updated) { | 
 | 		err = scarlett2_update_mix(mixer); | 
 | 		if (err < 0) | 
 | 			goto unlock; | 
 | 	} | 
 | 	ucontrol->value.integer.value[0] = private->mix[elem->control]; | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&private->data_mutex); | 
 | 	return err; | 
 | } | 
 |  | 
 | static int scarlett2_mixer_ctl_put(struct snd_kcontrol *kctl, | 
 | 				   struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct usb_mixer_interface *mixer = elem->head.mixer; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	int oval, val, mix_num, err = 0; | 
 | 	int index = elem->control; | 
 |  | 
 | 	mutex_lock(&private->data_mutex); | 
 |  | 
 | 	if (private->hwdep_in_use) { | 
 | 		err = -EBUSY; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	oval = private->mix[index]; | 
 | 	val = clamp(ucontrol->value.integer.value[0], | 
 | 		    0L, (long)SCARLETT2_MIXER_MAX_VALUE); | 
 | 	mix_num = index / private->num_mix_in; | 
 |  | 
 | 	if (oval == val) | 
 | 		goto unlock; | 
 |  | 
 | 	private->mix[index] = val; | 
 | 	err = scarlett2_usb_set_mix(mixer, mix_num); | 
 | 	if (err == 0) | 
 | 		err = 1; | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&private->data_mutex); | 
 | 	return err; | 
 | } | 
 |  | 
 | static const DECLARE_TLV_DB_MINMAX( | 
 | 	db_scale_scarlett2_mixer, | 
 | 	SCARLETT2_MIXER_MIN_DB * 100, | 
 | 	SCARLETT2_MIXER_MAX_DB * 100 | 
 | ); | 
 |  | 
 | static const struct snd_kcontrol_new scarlett2_mixer_ctl = { | 
 | 	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, | 
 | 	.access = SNDRV_CTL_ELEM_ACCESS_READWRITE | | 
 | 		  SNDRV_CTL_ELEM_ACCESS_TLV_READ, | 
 | 	.name = "", | 
 | 	.info = scarlett2_mixer_ctl_info, | 
 | 	.get  = scarlett2_mixer_ctl_get, | 
 | 	.put  = scarlett2_mixer_ctl_put, | 
 | 	.private_value = SCARLETT2_MIXER_MAX_DB, /* max value */ | 
 | 	.tlv = { .p = db_scale_scarlett2_mixer } | 
 | }; | 
 |  | 
 | static int scarlett2_add_mixer_ctls(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	int err, i, j; | 
 | 	int index; | 
 | 	char s[SNDRV_CTL_ELEM_ID_NAME_MAXLEN]; | 
 |  | 
 | 	for (i = 0, index = 0; i < private->num_mix_out; i++) | 
 | 		for (j = 0; j < private->num_mix_in; j++, index++) { | 
 | 			snprintf(s, sizeof(s), | 
 | 				 "Mix %c Input %02d Playback Volume", | 
 | 				 'A' + i, j + 1); | 
 | 			err = scarlett2_add_new_ctl(mixer, &scarlett2_mixer_ctl, | 
 | 						    index, 1, s, | 
 | 						    &private->mix_ctls[index]); | 
 | 			if (err < 0) | 
 | 				return err; | 
 | 		} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /*** Direct Monitor Control ***/ | 
 |  | 
 | static int scarlett2_update_direct_monitor(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 |  | 
 | 	private->direct_monitor_updated = 0; | 
 |  | 
 | 	if (!private->info->direct_monitor) | 
 | 		return 0; | 
 |  | 
 | 	return scarlett2_usb_get_config( | 
 | 		mixer, SCARLETT2_CONFIG_DIRECT_MONITOR, | 
 | 		1, &private->direct_monitor_switch); | 
 | } | 
 |  | 
 | static int scarlett2_update_monitor_mix(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	int err, i; | 
 | 	u16 mix_values[SCARLETT2_MONITOR_MIX_MAX]; | 
 |  | 
 | 	if (!private->num_monitor_mix_ctls) | 
 | 		return 0; | 
 |  | 
 | 	err = scarlett2_usb_get_config( | 
 | 		mixer, SCARLETT2_CONFIG_DIRECT_MONITOR_GAIN, | 
 | 		private->num_monitor_mix_ctls, mix_values); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	for (i = 0; i < private->num_monitor_mix_ctls; i++) | 
 | 		private->monitor_mix[i] = scarlett2_mixer_value_to_db( | 
 | 			mix_values[i]); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int scarlett2_direct_monitor_ctl_get( | 
 | 	struct snd_kcontrol *kctl, struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct usb_mixer_interface *mixer = elem->head.mixer; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	int err = 0; | 
 |  | 
 | 	mutex_lock(&private->data_mutex); | 
 |  | 
 | 	if (private->hwdep_in_use) { | 
 | 		err = -EBUSY; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	if (private->direct_monitor_updated) { | 
 | 		err = scarlett2_update_direct_monitor(mixer); | 
 | 		if (err < 0) | 
 | 			goto unlock; | 
 | 	} | 
 | 	ucontrol->value.enumerated.item[0] = private->direct_monitor_switch; | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&private->data_mutex); | 
 | 	return err; | 
 | } | 
 |  | 
 | static int scarlett2_direct_monitor_ctl_put( | 
 | 	struct snd_kcontrol *kctl, struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct usb_mixer_interface *mixer = elem->head.mixer; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 |  | 
 | 	int index = elem->control; | 
 | 	int oval, val, err = 0; | 
 |  | 
 | 	mutex_lock(&private->data_mutex); | 
 |  | 
 | 	if (private->hwdep_in_use) { | 
 | 		err = -EBUSY; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	oval = private->direct_monitor_switch; | 
 | 	val = min(ucontrol->value.enumerated.item[0], 2U); | 
 |  | 
 | 	if (oval == val) | 
 | 		goto unlock; | 
 |  | 
 | 	private->direct_monitor_switch = val; | 
 |  | 
 | 	/* Send switch change to the device */ | 
 | 	err = scarlett2_usb_set_config( | 
 | 		mixer, SCARLETT2_CONFIG_DIRECT_MONITOR, index, val); | 
 | 	if (err == 0) | 
 | 		err = 1; | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&private->data_mutex); | 
 | 	return err; | 
 | } | 
 |  | 
 | static int scarlett2_direct_monitor_stereo_enum_ctl_info( | 
 | 	struct snd_kcontrol *kctl, struct snd_ctl_elem_info *uinfo) | 
 | { | 
 | 	static const char *const values[3] = { | 
 | 		"Off", "Mono", "Stereo" | 
 | 	}; | 
 |  | 
 | 	return snd_ctl_enum_info(uinfo, 1, 3, values); | 
 | } | 
 |  | 
 | /* Direct Monitor for Solo is mono-only and only needs a boolean control | 
 |  * Direct Monitor for 2i2 is selectable between Off/Mono/Stereo | 
 |  */ | 
 | static const struct snd_kcontrol_new scarlett2_direct_monitor_ctl[2] = { | 
 | 	{ | 
 | 		.iface = SNDRV_CTL_ELEM_IFACE_MIXER, | 
 | 		.name = "", | 
 | 		.info = snd_ctl_boolean_mono_info, | 
 | 		.get  = scarlett2_direct_monitor_ctl_get, | 
 | 		.put  = scarlett2_direct_monitor_ctl_put, | 
 | 	}, | 
 | 	{ | 
 | 		.iface = SNDRV_CTL_ELEM_IFACE_MIXER, | 
 | 		.name = "", | 
 | 		.info = scarlett2_direct_monitor_stereo_enum_ctl_info, | 
 | 		.get  = scarlett2_direct_monitor_ctl_get, | 
 | 		.put  = scarlett2_direct_monitor_ctl_put, | 
 | 	} | 
 | }; | 
 |  | 
 | static int scarlett2_monitor_mix_ctl_get(struct snd_kcontrol *kctl, | 
 | 					 struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct scarlett2_data *private = elem->head.mixer->private_data; | 
 |  | 
 | 	ucontrol->value.integer.value[0] = private->monitor_mix[elem->control]; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int scarlett2_monitor_mix_ctl_put(struct snd_kcontrol *kctl, | 
 | 					 struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct usb_mixer_interface *mixer = elem->head.mixer; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	int oval, val, err = 0; | 
 | 	int index = elem->control; | 
 |  | 
 | 	mutex_lock(&private->data_mutex); | 
 |  | 
 | 	if (private->hwdep_in_use) { | 
 | 		err = -EBUSY; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	oval = private->monitor_mix[index]; | 
 | 	val = clamp(ucontrol->value.integer.value[0], | 
 | 		    0L, (long)SCARLETT2_MIXER_MAX_VALUE); | 
 |  | 
 | 	if (oval == val) | 
 | 		goto unlock; | 
 |  | 
 | 	private->monitor_mix[index] = val; | 
 | 	err = scarlett2_usb_set_config( | 
 | 		mixer, SCARLETT2_CONFIG_DIRECT_MONITOR_GAIN, | 
 | 		index, scarlett2_mixer_values[val]); | 
 | 	if (err == 0) | 
 | 		err = 1; | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&private->data_mutex); | 
 | 	return err; | 
 | } | 
 |  | 
 | static const struct snd_kcontrol_new scarlett2_monitor_mix_ctl = { | 
 | 	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, | 
 | 	.access = SNDRV_CTL_ELEM_ACCESS_READWRITE | | 
 | 		  SNDRV_CTL_ELEM_ACCESS_TLV_READ, | 
 | 	.name = "", | 
 | 	.info = scarlett2_mixer_ctl_info, | 
 | 	.get  = scarlett2_monitor_mix_ctl_get, | 
 | 	.put  = scarlett2_monitor_mix_ctl_put, | 
 | 	.private_value = SCARLETT2_MIXER_MAX_DB, /* max value */ | 
 | 	.tlv = { .p = db_scale_scarlett2_mixer } | 
 | }; | 
 |  | 
 | static int scarlett2_add_direct_monitor_ctls(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	const struct scarlett2_device_info *info = private->info; | 
 | 	const char *s; | 
 | 	int err, i, j, k, index; | 
 |  | 
 | 	if (!info->direct_monitor) | 
 | 		return 0; | 
 |  | 
 | 	s = info->direct_monitor == 1 | 
 | 	      ? "Direct Monitor Playback Switch" | 
 | 	      : "Direct Monitor Playback Enum"; | 
 |  | 
 | 	err = scarlett2_add_new_ctl( | 
 | 		mixer, &scarlett2_direct_monitor_ctl[info->direct_monitor - 1], | 
 | 		0, 1, s, &private->direct_monitor_ctl); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	if (!private->num_monitor_mix_ctls) | 
 | 		return 0; | 
 |  | 
 | 	/* 1 or 2 direct monitor selections (Mono & Stereo) */ | 
 | 	for (i = 0, index = 0; i < info->direct_monitor; i++) { | 
 | 		const char * const format = | 
 | 			"Monitor %sMix %c Input %02d Playback Volume"; | 
 | 		const char *mix_type; | 
 |  | 
 | 		if (info->direct_monitor == 1) | 
 | 			mix_type = ""; | 
 | 		else if (i == 0) | 
 | 			mix_type = "1 "; | 
 | 		else | 
 | 			mix_type = "2 "; | 
 |  | 
 | 		/* 2 Mix outputs, A/Left & B/Right */ | 
 | 		for (j = 0; j < 2; j++) | 
 |  | 
 | 			/* Mix inputs */ | 
 | 			for (k = 0; k < private->num_mix_in; k++, index++) { | 
 | 				char name[SNDRV_CTL_ELEM_ID_NAME_MAXLEN]; | 
 |  | 
 | 				scnprintf(name, sizeof(name), format, | 
 | 					  mix_type, 'A' + j, k + 1); | 
 |  | 
 | 				err = scarlett2_add_new_ctl( | 
 | 					mixer, &scarlett2_monitor_mix_ctl, | 
 | 					index, 1, name, NULL); | 
 | 				if (err < 0) | 
 | 					return err; | 
 | 			} | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /*** Mux Source Selection Controls ***/ | 
 |  | 
 | static int scarlett2_mux_src_enum_ctl_info(struct snd_kcontrol *kctl, | 
 | 					   struct snd_ctl_elem_info *uinfo) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct scarlett2_data *private = elem->head.mixer->private_data; | 
 | 	const struct scarlett2_device_info *info = private->info; | 
 | 	const int (*port_count)[SCARLETT2_PORT_DIRNS] = info->port_count; | 
 | 	unsigned int item = uinfo->value.enumerated.item; | 
 | 	int items = private->num_mux_srcs; | 
 | 	int port_type; | 
 |  | 
 | 	uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; | 
 | 	uinfo->count = elem->channels; | 
 | 	uinfo->value.enumerated.items = items; | 
 |  | 
 | 	if (item >= items) | 
 | 		item = uinfo->value.enumerated.item = items - 1; | 
 |  | 
 | 	for (port_type = 0; | 
 | 	     port_type < SCARLETT2_PORT_TYPE_COUNT; | 
 | 	     port_type++) { | 
 | 		if (item < port_count[port_type][SCARLETT2_PORT_IN]) { | 
 | 			const struct scarlett2_port *port = | 
 | 				&scarlett2_ports[port_type]; | 
 |  | 
 | 			if (port_type == SCARLETT2_PORT_TYPE_MIX && | 
 | 			    item >= private->num_mix_out) | 
 | 				scnprintf(uinfo->value.enumerated.name, | 
 | 					  sizeof(uinfo->value.enumerated.name), | 
 | 					  port->dsp_src_descr, | 
 | 					  item - private->num_mix_out + 1); | 
 | 			else | 
 | 				scnprintf(uinfo->value.enumerated.name, | 
 | 					  sizeof(uinfo->value.enumerated.name), | 
 | 					  port->src_descr, | 
 | 					  item + port->src_num_offset); | 
 |  | 
 | 			return 0; | 
 | 		} | 
 | 		item -= port_count[port_type][SCARLETT2_PORT_IN]; | 
 | 	} | 
 |  | 
 | 	return -EINVAL; | 
 | } | 
 |  | 
 | static int scarlett2_mux_src_enum_ctl_get(struct snd_kcontrol *kctl, | 
 | 					  struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct usb_mixer_interface *mixer = elem->head.mixer; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	int index = line_out_remap(private, elem->control); | 
 | 	int err = 0; | 
 |  | 
 | 	mutex_lock(&private->data_mutex); | 
 |  | 
 | 	if (private->hwdep_in_use) { | 
 | 		err = -EBUSY; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	if (private->mux_updated) { | 
 | 		err = scarlett2_usb_get_mux(mixer); | 
 | 		if (err < 0) | 
 | 			goto unlock; | 
 | 	} | 
 | 	ucontrol->value.enumerated.item[0] = private->mux[index]; | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&private->data_mutex); | 
 | 	return err; | 
 | } | 
 |  | 
 | static int scarlett2_mux_src_enum_ctl_put(struct snd_kcontrol *kctl, | 
 | 					  struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct usb_mixer_interface *mixer = elem->head.mixer; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	int index = line_out_remap(private, elem->control); | 
 | 	int oval, val, err = 0; | 
 |  | 
 | 	mutex_lock(&private->data_mutex); | 
 |  | 
 | 	if (private->hwdep_in_use) { | 
 | 		err = -EBUSY; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	oval = private->mux[index]; | 
 | 	val = min(ucontrol->value.enumerated.item[0], | 
 | 		  private->num_mux_srcs - 1U); | 
 |  | 
 | 	if (oval == val) | 
 | 		goto unlock; | 
 |  | 
 | 	private->mux[index] = val; | 
 | 	err = scarlett2_usb_set_mux(mixer); | 
 | 	if (err == 0) | 
 | 		err = 1; | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&private->data_mutex); | 
 | 	return err; | 
 | } | 
 |  | 
 | static const struct snd_kcontrol_new scarlett2_mux_src_enum_ctl = { | 
 | 	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, | 
 | 	.name = "", | 
 | 	.info = scarlett2_mux_src_enum_ctl_info, | 
 | 	.get  = scarlett2_mux_src_enum_ctl_get, | 
 | 	.put  = scarlett2_mux_src_enum_ctl_put, | 
 | }; | 
 |  | 
 | static int scarlett2_add_mux_enums(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	const struct scarlett2_device_info *info = private->info; | 
 | 	const int (*port_count)[SCARLETT2_PORT_DIRNS] = info->port_count; | 
 | 	int port_type, channel, i; | 
 |  | 
 | 	for (i = 0, port_type = 0; | 
 | 	     port_type < SCARLETT2_PORT_TYPE_COUNT; | 
 | 	     port_type++) { | 
 | 		for (channel = 0; | 
 | 		     channel < port_count[port_type][SCARLETT2_PORT_OUT]; | 
 | 		     channel++, i++) { | 
 | 			int err; | 
 | 			char s[SNDRV_CTL_ELEM_ID_NAME_MAXLEN]; | 
 | 			int channel_num = channel + 1; | 
 | 			const struct scarlett2_port *port = | 
 | 				&scarlett2_ports[port_type]; | 
 | 			const char *descr = port->dst_descr; | 
 |  | 
 | 			if (port_type == SCARLETT2_PORT_TYPE_MIX && | 
 | 			    channel >= private->num_mix_in) { | 
 | 				channel_num -= private->num_mix_in; | 
 | 				descr = port->dsp_dst_descr; | 
 | 			} | 
 |  | 
 | 			snprintf(s, sizeof(s) - 5, descr, channel_num); | 
 | 			strcat(s, " Enum"); | 
 |  | 
 | 			err = scarlett2_add_new_ctl(mixer, | 
 | 						    &scarlett2_mux_src_enum_ctl, | 
 | 						    i, 1, s, | 
 | 						    &private->mux_ctls[i]); | 
 | 			if (err < 0) | 
 | 				return err; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /*** Meter Controls ***/ | 
 |  | 
 | static int scarlett2_meter_ctl_info(struct snd_kcontrol *kctl, | 
 | 				    struct snd_ctl_elem_info *uinfo) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 |  | 
 | 	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; | 
 | 	uinfo->count = elem->channels; | 
 | 	uinfo->value.integer.min = 0; | 
 | 	uinfo->value.integer.max = 4095; | 
 | 	uinfo->value.integer.step = 1; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int scarlett2_meter_ctl_get(struct snd_kcontrol *kctl, | 
 | 				   struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct usb_mixer_interface *mixer = elem->head.mixer; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	u8 *meter_level_map = private->meter_level_map; | 
 | 	u16 meter_levels[SCARLETT2_MAX_METERS]; | 
 | 	int i, err; | 
 |  | 
 | 	mutex_lock(&private->data_mutex); | 
 |  | 
 | 	if (private->hwdep_in_use) { | 
 | 		err = -EBUSY; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	err = scarlett2_usb_get_meter_levels(mixer, elem->channels, | 
 | 					     meter_levels); | 
 | 	if (err < 0) | 
 | 		goto unlock; | 
 |  | 
 | 	/* copy & translate from meter_levels[] using meter_level_map[] */ | 
 | 	for (i = 0; i < elem->channels; i++) { | 
 | 		int idx = meter_level_map[i]; | 
 | 		int value; | 
 |  | 
 | 		if (idx == 255) | 
 | 			value = 0; | 
 | 		else | 
 | 			value = meter_levels[idx]; | 
 |  | 
 | 		ucontrol->value.integer.value[i] = value; | 
 | 	} | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&private->data_mutex); | 
 |  | 
 | 	return err; | 
 | } | 
 |  | 
 | static const struct snd_kcontrol_new scarlett2_meter_ctl = { | 
 | 	.iface = SNDRV_CTL_ELEM_IFACE_PCM, | 
 | 	.access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE, | 
 | 	.name = "", | 
 | 	.info = scarlett2_meter_ctl_info, | 
 | 	.get  = scarlett2_meter_ctl_get | 
 | }; | 
 |  | 
 | static int scarlett2_add_meter_ctl(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 |  | 
 | 	/* devices without a mixer also don't support reporting levels */ | 
 | 	if (!scarlett2_has_mixer(private)) | 
 | 		return 0; | 
 |  | 
 | 	return scarlett2_add_new_ctl(mixer, &scarlett2_meter_ctl, | 
 | 				     0, private->num_mux_dsts, | 
 | 				     "Level Meter", NULL); | 
 | } | 
 |  | 
 | /*** MSD Controls ***/ | 
 |  | 
 | static int scarlett2_msd_ctl_get(struct snd_kcontrol *kctl, | 
 | 				 struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct scarlett2_data *private = elem->head.mixer->private_data; | 
 |  | 
 | 	ucontrol->value.integer.value[0] = private->msd_switch; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int scarlett2_msd_ctl_put(struct snd_kcontrol *kctl, | 
 | 				 struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct usb_mixer_interface *mixer = elem->head.mixer; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 |  | 
 | 	int oval, val, err = 0; | 
 |  | 
 | 	mutex_lock(&private->data_mutex); | 
 |  | 
 | 	if (private->hwdep_in_use) { | 
 | 		err = -EBUSY; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	oval = private->msd_switch; | 
 | 	val = !!ucontrol->value.integer.value[0]; | 
 |  | 
 | 	if (oval == val) | 
 | 		goto unlock; | 
 |  | 
 | 	private->msd_switch = val; | 
 |  | 
 | 	/* Send switch change to the device */ | 
 | 	err = scarlett2_usb_set_config(mixer, SCARLETT2_CONFIG_MSD_SWITCH, | 
 | 				       0, val); | 
 | 	if (err == 0) | 
 | 		err = 1; | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&private->data_mutex); | 
 | 	return err; | 
 | } | 
 |  | 
 | static const struct snd_kcontrol_new scarlett2_msd_ctl = { | 
 | 	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, | 
 | 	.name = "", | 
 | 	.info = snd_ctl_boolean_mono_info, | 
 | 	.get  = scarlett2_msd_ctl_get, | 
 | 	.put  = scarlett2_msd_ctl_put, | 
 | }; | 
 |  | 
 | static int scarlett2_add_msd_ctl(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 |  | 
 | 	if (!scarlett2_has_config_item(private, SCARLETT2_CONFIG_MSD_SWITCH)) | 
 | 		return 0; | 
 |  | 
 | 	/* If MSD mode is off, hide the switch by default */ | 
 | 	if (!private->msd_switch && !(mixer->chip->setup & SCARLETT2_MSD_ENABLE)) | 
 | 		return 0; | 
 |  | 
 | 	/* Add MSD control */ | 
 | 	return scarlett2_add_new_ctl(mixer, &scarlett2_msd_ctl, | 
 | 				     0, 1, "MSD Mode Switch", NULL); | 
 | } | 
 |  | 
 | /*** Standalone Control ***/ | 
 |  | 
 | static int scarlett2_standalone_ctl_get(struct snd_kcontrol *kctl, | 
 | 					struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct scarlett2_data *private = elem->head.mixer->private_data; | 
 |  | 
 | 	ucontrol->value.integer.value[0] = private->standalone_switch; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int scarlett2_standalone_ctl_put(struct snd_kcontrol *kctl, | 
 | 					struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct usb_mixer_interface *mixer = elem->head.mixer; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 |  | 
 | 	int oval, val, err = 0; | 
 |  | 
 | 	mutex_lock(&private->data_mutex); | 
 |  | 
 | 	if (private->hwdep_in_use) { | 
 | 		err = -EBUSY; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	oval = private->standalone_switch; | 
 | 	val = !!ucontrol->value.integer.value[0]; | 
 |  | 
 | 	if (oval == val) | 
 | 		goto unlock; | 
 |  | 
 | 	private->standalone_switch = val; | 
 |  | 
 | 	/* Send switch change to the device */ | 
 | 	err = scarlett2_usb_set_config(mixer, | 
 | 				       SCARLETT2_CONFIG_STANDALONE_SWITCH, | 
 | 				       0, val); | 
 | 	if (err == 0) | 
 | 		err = 1; | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&private->data_mutex); | 
 | 	return err; | 
 | } | 
 |  | 
 | static const struct snd_kcontrol_new scarlett2_standalone_ctl = { | 
 | 	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, | 
 | 	.name = "", | 
 | 	.info = snd_ctl_boolean_mono_info, | 
 | 	.get  = scarlett2_standalone_ctl_get, | 
 | 	.put  = scarlett2_standalone_ctl_put, | 
 | }; | 
 |  | 
 | static int scarlett2_add_standalone_ctl(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 |  | 
 | 	if (!scarlett2_has_config_item(private, | 
 | 				       SCARLETT2_CONFIG_STANDALONE_SWITCH)) | 
 | 		return 0; | 
 |  | 
 | 	/* Add standalone control */ | 
 | 	return scarlett2_add_new_ctl(mixer, &scarlett2_standalone_ctl, | 
 | 				     0, 1, "Standalone Switch", NULL); | 
 | } | 
 |  | 
 | /*** Power Status ***/ | 
 |  | 
 | static int scarlett2_update_power_status(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	int err; | 
 | 	u8 power_ext, power_low; | 
 |  | 
 | 	private->power_status_updated = 0; | 
 |  | 
 | 	err = scarlett2_usb_get_config(mixer, SCARLETT2_CONFIG_POWER_EXT, | 
 | 				       1, &power_ext); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	err = scarlett2_usb_get_config(mixer, SCARLETT2_CONFIG_POWER_LOW, | 
 | 				       1, &power_low); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	if (power_low) | 
 | 		private->power_status = SCARLETT2_POWER_STATUS_FAIL; | 
 | 	else if (power_ext) | 
 | 		private->power_status = SCARLETT2_POWER_STATUS_EXT; | 
 | 	else | 
 | 		private->power_status = SCARLETT2_POWER_STATUS_BUS; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int scarlett2_power_status_ctl_get(struct snd_kcontrol *kctl, | 
 | 					  struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct usb_mixer_interface *mixer = elem->head.mixer; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	int err = 0; | 
 |  | 
 | 	mutex_lock(&private->data_mutex); | 
 |  | 
 | 	if (private->power_status_updated) { | 
 | 		err = scarlett2_update_power_status(mixer); | 
 | 		if (err < 0) | 
 | 			goto unlock; | 
 | 	} | 
 | 	ucontrol->value.integer.value[0] = private->power_status; | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&private->data_mutex); | 
 | 	return err; | 
 | } | 
 |  | 
 | static int scarlett2_power_status_ctl_info( | 
 | 	struct snd_kcontrol *kctl, struct snd_ctl_elem_info *uinfo) | 
 | { | 
 | 	static const char *const values[3] = { | 
 | 		"External", "Bus", "Fail" | 
 | 	}; | 
 |  | 
 | 	return snd_ctl_enum_info(uinfo, 1, 3, values); | 
 | } | 
 |  | 
 | static const struct snd_kcontrol_new scarlett2_power_status_ctl = { | 
 | 	.iface = SNDRV_CTL_ELEM_IFACE_CARD, | 
 | 	.access = SNDRV_CTL_ELEM_ACCESS_READ, | 
 | 	.name = "", | 
 | 	.info = scarlett2_power_status_ctl_info, | 
 | 	.get  = scarlett2_power_status_ctl_get, | 
 | }; | 
 |  | 
 | static int scarlett2_add_power_status_ctl(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 |  | 
 | 	if (!scarlett2_has_config_item(private, | 
 | 				       SCARLETT2_CONFIG_POWER_EXT)) | 
 | 		return 0; | 
 |  | 
 | 	/* Add power status control */ | 
 | 	return scarlett2_add_new_ctl(mixer, &scarlett2_power_status_ctl, | 
 | 				     0, 1, "Power Status Card Enum", | 
 | 				     &private->power_status_ctl); | 
 | } | 
 |  | 
 | /*** Bluetooth Volume ***/ | 
 |  | 
 | static int scarlett2_update_bluetooth_volume(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	int err; | 
 |  | 
 | 	private->bluetooth_updated = 0; | 
 |  | 
 | 	if (!private->info->has_bluetooth) | 
 | 		return 0; | 
 |  | 
 | 	err = scarlett2_usb_get_config(mixer, | 
 | 				       SCARLETT2_CONFIG_BLUETOOTH_VOLUME, | 
 | 				       1, &private->bluetooth_volume); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int scarlett2_bluetooth_volume_ctl_get(struct snd_kcontrol *kctl, | 
 | 					     struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct usb_mixer_interface *mixer = elem->head.mixer; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	int err = 0; | 
 |  | 
 | 	mutex_lock(&private->data_mutex); | 
 |  | 
 | 	if (private->hwdep_in_use) { | 
 | 		err = -EBUSY; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	if (private->bluetooth_updated) { | 
 | 		err = scarlett2_update_bluetooth_volume(mixer); | 
 | 		if (err < 0) | 
 | 			goto unlock; | 
 | 	} | 
 | 	ucontrol->value.integer.value[0] = private->bluetooth_volume; | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&private->data_mutex); | 
 | 	return err; | 
 | } | 
 |  | 
 | static int scarlett2_bluetooth_volume_ctl_put(struct snd_kcontrol *kctl, | 
 | 					     struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct usb_mixer_interface *mixer = elem->head.mixer; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	int oval, val, err = 0; | 
 |  | 
 | 	mutex_lock(&private->data_mutex); | 
 |  | 
 | 	if (private->hwdep_in_use) { | 
 | 		err = -EBUSY; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	oval = private->bluetooth_volume; | 
 | 	val = clamp(ucontrol->value.integer.value[0], | 
 | 		    0L, (long)SCARLETT2_MAX_BLUETOOTH_VOLUME); | 
 |  | 
 | 	if (oval == val) | 
 | 		goto unlock; | 
 |  | 
 | 	private->bluetooth_volume = val; | 
 | 	err = scarlett2_usb_set_config(mixer, | 
 | 				       SCARLETT2_CONFIG_BLUETOOTH_VOLUME, | 
 | 				       0, val); | 
 | 	if (err == 0) | 
 | 		err = 1; | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&private->data_mutex); | 
 | 	return err; | 
 | } | 
 |  | 
 | static int scarlett2_bluetooth_volume_ctl_info( | 
 | 	struct snd_kcontrol *kctl, struct snd_ctl_elem_info *uinfo) | 
 | { | 
 | 	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; | 
 | 	uinfo->count = 1; | 
 | 	uinfo->value.integer.min = 0; | 
 | 	uinfo->value.integer.max = SCARLETT2_MAX_BLUETOOTH_VOLUME; | 
 | 	uinfo->value.integer.step = 1; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct snd_kcontrol_new scarlett2_bluetooth_volume_ctl = { | 
 | 	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, | 
 | 	.name = "", | 
 | 	.info = scarlett2_bluetooth_volume_ctl_info, | 
 | 	.get  = scarlett2_bluetooth_volume_ctl_get, | 
 | 	.put  = scarlett2_bluetooth_volume_ctl_put, | 
 | }; | 
 |  | 
 | static int scarlett2_add_bluetooth_volume_ctl( | 
 | 	struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 |  | 
 | 	if (!private->info->has_bluetooth) | 
 | 		return 0; | 
 |  | 
 | 	/* Add Bluetooth volume control */ | 
 | 	return scarlett2_add_new_ctl(mixer, &scarlett2_bluetooth_volume_ctl, | 
 | 				     0, 1, "Bluetooth Capture Volume", | 
 | 				     &private->bluetooth_volume_ctl); | 
 | } | 
 |  | 
 | /*** S/PDIF Mode Controls ***/ | 
 |  | 
 | static int scarlett2_update_spdif_mode(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	int err, i; | 
 | 	u8 mode; | 
 | 	const u8 *mode_values = private->info->spdif_mode_values; | 
 |  | 
 | 	if (!private->info->spdif_mode_control_name) | 
 | 		return 0; | 
 |  | 
 | 	err = scarlett2_usb_get_config(mixer, SCARLETT2_CONFIG_SPDIF_MODE, | 
 | 				       1, &mode); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	private->spdif_mode = 0; | 
 |  | 
 | 	for (i = 0; *mode_values != 0xff; i++, mode_values++) | 
 | 		if (*mode_values == mode) { | 
 | 			private->spdif_mode = i; | 
 | 			break; | 
 | 		} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int scarlett2_spdif_mode_ctl_info(struct snd_kcontrol *kctl, | 
 | 					   struct snd_ctl_elem_info *uinfo) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct scarlett2_data *private = elem->head.mixer->private_data; | 
 | 	const char * const *mode_texts = private->info->spdif_mode_texts; | 
 | 	int count = 0; | 
 |  | 
 | 	while (*mode_texts++) | 
 | 		count++; | 
 |  | 
 | 	return snd_ctl_enum_info(uinfo, 1, count, | 
 | 				 private->info->spdif_mode_texts); | 
 | } | 
 |  | 
 | static int scarlett2_spdif_mode_ctl_get(struct snd_kcontrol *kctl, | 
 | 					  struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct scarlett2_data *private = elem->head.mixer->private_data; | 
 |  | 
 | 	ucontrol->value.enumerated.item[0] = private->spdif_mode; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int scarlett2_spdif_mode_ctl_put(struct snd_kcontrol *kctl, | 
 | 					  struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct usb_mixer_elem_info *elem = kctl->private_data; | 
 | 	struct usb_mixer_interface *mixer = elem->head.mixer; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	int oval, val, err = 0; | 
 | 	int i; | 
 |  | 
 | 	mutex_lock(&private->data_mutex); | 
 |  | 
 | 	oval = private->spdif_mode; | 
 | 	val = ucontrol->value.enumerated.item[0]; | 
 |  | 
 | 	if (val < 0) { | 
 | 		err = -EINVAL; | 
 | 		goto unlock; | 
 | 	} | 
 |  | 
 | 	for (i = 0; i <= val; i++) | 
 | 		if (private->info->spdif_mode_values[i] == 0xff) { | 
 | 			err = -EINVAL; | 
 | 			goto unlock; | 
 | 		} | 
 |  | 
 | 	if (oval == val) | 
 | 		goto unlock; | 
 |  | 
 | 	private->spdif_mode = val; | 
 |  | 
 | 	err = scarlett2_usb_set_config( | 
 | 		mixer, SCARLETT2_CONFIG_SPDIF_MODE, 0, | 
 | 		private->info->spdif_mode_values[val]); | 
 | 	if (!err) | 
 | 		err = 1; | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&private->data_mutex); | 
 | 	return err; | 
 | } | 
 |  | 
 | static const struct snd_kcontrol_new scarlett2_spdif_mode_ctl = { | 
 | 	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, | 
 | 	.name = "", | 
 | 	.info = scarlett2_spdif_mode_ctl_info, | 
 | 	.get  = scarlett2_spdif_mode_ctl_get, | 
 | 	.put  = scarlett2_spdif_mode_ctl_put, | 
 | }; | 
 |  | 
 | static int scarlett2_add_spdif_mode_ctl(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 |  | 
 | 	if (!private->info->spdif_mode_control_name) | 
 | 		return 0; | 
 |  | 
 | 	return scarlett2_add_new_ctl(mixer, &scarlett2_spdif_mode_ctl, | 
 | 				     0, 1, | 
 | 				     private->info->spdif_mode_control_name, | 
 | 				     NULL); | 
 | } | 
 |  | 
 | /*** Notification Handlers ***/ | 
 |  | 
 | /* Notify on sync change */ | 
 | static void scarlett2_notify_sync(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 |  | 
 | 	private->sync_updated = 1; | 
 |  | 
 | 	snd_ctl_notify(mixer->chip->card, SNDRV_CTL_EVENT_MASK_VALUE, | 
 | 		       &private->sync_ctl->id); | 
 | } | 
 |  | 
 | /* Notify on monitor change (Gen 2/3) */ | 
 | static void scarlett2_notify_monitor(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct snd_card *card = mixer->chip->card; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	int i; | 
 |  | 
 | 	if (!scarlett2_has_config_item(private, SCARLETT2_CONFIG_SW_HW_SWITCH)) | 
 | 		return; | 
 |  | 
 | 	private->vol_updated = 1; | 
 |  | 
 | 	snd_ctl_notify(mixer->chip->card, SNDRV_CTL_EVENT_MASK_VALUE, | 
 | 		       &private->master_vol_ctl->id); | 
 |  | 
 | 	for (i = 0; i < private->num_line_out; i++) | 
 | 		if (private->vol_sw_hw_switch[line_out_remap(private, i)]) | 
 | 			snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_VALUE, | 
 | 				       &private->vol_ctls[i]->id); | 
 | } | 
 |  | 
 | /* Notify on volume change (Gen 4) */ | 
 | static void scarlett2_notify_volume(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 |  | 
 | 	private->vol_updated = 1; | 
 |  | 
 | 	snd_ctl_notify(mixer->chip->card, SNDRV_CTL_EVENT_MASK_VALUE, | 
 | 		       &private->master_vol_ctl->id); | 
 | 	snd_ctl_notify(mixer->chip->card, SNDRV_CTL_EVENT_MASK_VALUE, | 
 | 		       &private->headphone_vol_ctl->id); | 
 | } | 
 |  | 
 | /* Notify on dim/mute change */ | 
 | static void scarlett2_notify_dim_mute(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct snd_card *card = mixer->chip->card; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	int i; | 
 |  | 
 | 	if (!scarlett2_has_config_item(private, SCARLETT2_CONFIG_SW_HW_SWITCH)) | 
 | 		return; | 
 |  | 
 | 	private->dim_mute_updated = 1; | 
 |  | 
 | 	for (i = 0; i < SCARLETT2_DIM_MUTE_COUNT; i++) | 
 | 		snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_VALUE, | 
 | 			       &private->dim_mute_ctls[i]->id); | 
 |  | 
 | 	for (i = 0; i < private->num_line_out; i++) | 
 | 		if (private->vol_sw_hw_switch[line_out_remap(private, i)]) | 
 | 			snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_VALUE, | 
 | 				       &private->mute_ctls[i]->id); | 
 | } | 
 |  | 
 | /* Notify on input level switch change */ | 
 | static void scarlett2_notify_input_level(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct snd_card *card = mixer->chip->card; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	const struct scarlett2_device_info *info = private->info; | 
 | 	int i; | 
 |  | 
 | 	private->input_level_updated = 1; | 
 |  | 
 | 	for (i = 0; i < info->level_input_count; i++) | 
 | 		snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_VALUE, | 
 | 			       &private->level_ctls[i]->id); | 
 | } | 
 |  | 
 | /* Notify on input pad switch change */ | 
 | static void scarlett2_notify_input_pad(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct snd_card *card = mixer->chip->card; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	const struct scarlett2_device_info *info = private->info; | 
 | 	int i; | 
 |  | 
 | 	private->input_pad_updated = 1; | 
 |  | 
 | 	for (i = 0; i < info->pad_input_count; i++) | 
 | 		snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_VALUE, | 
 | 			       &private->pad_ctls[i]->id); | 
 | } | 
 |  | 
 | /* Notify on input air switch change */ | 
 | static void scarlett2_notify_input_air(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct snd_card *card = mixer->chip->card; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	const struct scarlett2_device_info *info = private->info; | 
 | 	int i; | 
 |  | 
 | 	private->input_air_updated = 1; | 
 |  | 
 | 	for (i = 0; i < info->air_input_count; i++) | 
 | 		snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_VALUE, | 
 | 			       &private->air_ctls[i]->id); | 
 | } | 
 |  | 
 | /* Notify on input DSP switch change */ | 
 | static void scarlett2_notify_input_dsp(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct snd_card *card = mixer->chip->card; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	const struct scarlett2_device_info *info = private->info; | 
 | 	int i; | 
 |  | 
 | 	private->input_dsp_updated = 1; | 
 |  | 
 | 	for (i = 0; i < info->dsp_input_count; i++) | 
 | 		snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_VALUE, | 
 | 			       &private->dsp_ctls[i]->id); | 
 | } | 
 |  | 
 | /* Notify on input mute switch change */ | 
 | static void scarlett2_notify_input_mute(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct snd_card *card = mixer->chip->card; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	const struct scarlett2_device_info *info = private->info; | 
 | 	int i; | 
 |  | 
 | 	private->input_mute_updated = 1; | 
 |  | 
 | 	for (i = 0; i < info->mute_input_count; i++) | 
 | 		snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_VALUE, | 
 | 			       &private->input_mute_ctls[i]->id); | 
 | } | 
 |  | 
 | /* Notify on input phantom switch change */ | 
 | static void scarlett2_notify_input_phantom(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct snd_card *card = mixer->chip->card; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	const struct scarlett2_device_info *info = private->info; | 
 | 	int i; | 
 |  | 
 | 	private->input_phantom_updated = 1; | 
 |  | 
 | 	for (i = 0; i < info->phantom_count; i++) | 
 | 		snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_VALUE, | 
 | 			       &private->phantom_ctls[i]->id); | 
 |  | 
 | 	scarlett2_phantom_notify_access(mixer); | 
 | } | 
 |  | 
 | /* Notify on "input other" change (level/pad/air/phantom) */ | 
 | static void scarlett2_notify_input_other(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	scarlett2_notify_input_level(mixer); | 
 | 	scarlett2_notify_input_pad(mixer); | 
 | 	scarlett2_notify_input_air(mixer); | 
 | 	scarlett2_notify_input_phantom(mixer); | 
 | } | 
 |  | 
 | /* Notify on input select change */ | 
 | static void scarlett2_notify_input_select(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct snd_card *card = mixer->chip->card; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	const struct scarlett2_device_info *info = private->info; | 
 | 	int i; | 
 |  | 
 | 	if (!scarlett2_has_config_item(private, | 
 | 				       SCARLETT2_CONFIG_INPUT_SELECT_SWITCH)) | 
 | 		return; | 
 |  | 
 | 	private->input_select_updated = 1; | 
 |  | 
 | 	snd_ctl_notify(card, | 
 | 		       SNDRV_CTL_EVENT_MASK_VALUE | SNDRV_CTL_EVENT_MASK_INFO, | 
 | 		       &private->input_select_ctl->id); | 
 |  | 
 | 	for (i = 0; i < info->gain_input_count; i++) | 
 | 		snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_VALUE, | 
 | 			       &private->input_link_ctls[i]->id); | 
 | } | 
 |  | 
 | /* Notify on input gain change */ | 
 | static void scarlett2_notify_input_gain(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct snd_card *card = mixer->chip->card; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	const struct scarlett2_device_info *info = private->info; | 
 | 	int i; | 
 |  | 
 | 	if (!info->gain_input_count) | 
 | 		return; | 
 |  | 
 | 	private->input_gain_updated = 1; | 
 |  | 
 | 	for (i = 0; i < info->gain_input_count; i++) | 
 | 		snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_VALUE, | 
 | 			       &private->input_gain_ctls[i]->id); | 
 | } | 
 |  | 
 | /* Notify on autogain change */ | 
 | static void scarlett2_notify_autogain(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct snd_card *card = mixer->chip->card; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	const struct scarlett2_device_info *info = private->info; | 
 | 	int i; | 
 |  | 
 | 	if (!info->gain_input_count) | 
 | 		return; | 
 |  | 
 | 	private->autogain_updated = 1; | 
 |  | 
 | 	for (i = 0; i < info->gain_input_count; i++) { | 
 | 		snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_VALUE, | 
 | 			       &private->autogain_ctls[i]->id); | 
 | 		snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_VALUE, | 
 | 			       &private->autogain_status_ctls[i]->id); | 
 | 	} | 
 |  | 
 | 	for (i = 0; i < SCARLETT2_AG_TARGET_COUNT; i++) | 
 | 		if (scarlett2_has_config_item(private, | 
 | 					      scarlett2_ag_target_configs[i])) | 
 | 			snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_INFO, | 
 | 				       &private->ag_target_ctls[i]->id); | 
 |  | 
 | 	scarlett2_autogain_notify_access(mixer); | 
 | } | 
 |  | 
 | /* Notify on input safe switch change */ | 
 | static void scarlett2_notify_input_safe(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct snd_card *card = mixer->chip->card; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	const struct scarlett2_device_info *info = private->info; | 
 | 	int i; | 
 |  | 
 | 	if (!info->safe_input_count) | 
 | 		return; | 
 |  | 
 | 	private->input_safe_updated = 1; | 
 |  | 
 | 	for (i = 0; i < info->safe_input_count; i++) | 
 | 		snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_VALUE, | 
 | 			       &private->safe_ctls[i]->id); | 
 | } | 
 |  | 
 | /* Notify on "monitor other" change (speaker switching, talkback) */ | 
 | static void scarlett2_notify_monitor_other(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct snd_card *card = mixer->chip->card; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	const struct scarlett2_device_info *info = private->info; | 
 |  | 
 | 	private->monitor_other_updated = 1; | 
 |  | 
 | 	if (info->has_speaker_switching) | 
 | 		snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_VALUE, | 
 | 			       &private->speaker_switching_ctl->id); | 
 |  | 
 | 	if (info->has_talkback) | 
 | 		snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_VALUE, | 
 | 			       &private->talkback_ctl->id); | 
 |  | 
 | 	/* if speaker switching was recently enabled or disabled, | 
 | 	 * invalidate the dim/mute and mux enum controls | 
 | 	 */ | 
 | 	if (private->speaker_switching_switched) { | 
 | 		int i; | 
 |  | 
 | 		scarlett2_notify_dim_mute(mixer); | 
 |  | 
 | 		private->speaker_switching_switched = 0; | 
 | 		private->mux_updated = 1; | 
 |  | 
 | 		for (i = 0; i < private->num_mux_dsts; i++) | 
 | 			snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_VALUE, | 
 | 				       &private->mux_ctls[i]->id); | 
 | 	} | 
 | } | 
 |  | 
 | /* Notify on direct monitor switch change */ | 
 | static void scarlett2_notify_direct_monitor(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct snd_card *card = mixer->chip->card; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	int count = private->num_mix_in * private->num_mix_out; | 
 | 	int i; | 
 |  | 
 | 	private->direct_monitor_updated = 1; | 
 |  | 
 | 	snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_VALUE, | 
 | 		       &private->direct_monitor_ctl->id); | 
 |  | 
 | 	if (!scarlett2_has_mixer(private)) | 
 | 		return; | 
 |  | 
 | 	private->mix_updated = 1; | 
 |  | 
 | 	/* Notify of change to the mix controls */ | 
 | 	for (i = 0; i < count; i++) | 
 | 		snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_VALUE, | 
 | 			       &private->mix_ctls[i]->id); | 
 | } | 
 |  | 
 | /* Notify on power change */ | 
 | static void scarlett2_notify_power_status(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct snd_card *card = mixer->chip->card; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 |  | 
 | 	private->power_status_updated = 1; | 
 |  | 
 | 	snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_VALUE, | 
 | 		       &private->power_status_ctl->id); | 
 | } | 
 |  | 
 | /* Notify on mux change */ | 
 | static void scarlett2_notify_mux(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct snd_card *card = mixer->chip->card; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	int i; | 
 |  | 
 | 	private->mux_updated = 1; | 
 |  | 
 | 	for (i = 0; i < private->num_mux_dsts; i++) | 
 | 		snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_VALUE, | 
 | 			       &private->mux_ctls[i]->id); | 
 | } | 
 |  | 
 | /* Notify on PCM input switch change */ | 
 | static void scarlett2_notify_pcm_input_switch(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct snd_card *card = mixer->chip->card; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 |  | 
 | 	private->pcm_input_switch_updated = 1; | 
 |  | 
 | 	snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_VALUE, | 
 | 		       &private->pcm_input_switch_ctl->id); | 
 |  | 
 | 	scarlett2_notify_mux(mixer); | 
 | } | 
 |  | 
 | /* Notify on Bluetooth change */ | 
 | static void scarlett2_notify_bluetooth(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct snd_card *card = mixer->chip->card; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 |  | 
 | 	if (!private->info->has_bluetooth) | 
 | 		return; | 
 |  | 
 | 	private->bluetooth_updated = 1; | 
 |  | 
 | 	snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_VALUE, | 
 | 		       &private->bluetooth_volume_ctl->id); | 
 | } | 
 |  | 
 | /* Handle acknowledgement that a command was received; let | 
 |  * scarlett2_usb() know that it can proceed | 
 |  */ | 
 | static void scarlett2_notify_ack(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 |  | 
 | 	/* if running == 0, ignore ACKs */ | 
 | 	if (private->running) | 
 | 		complete(&private->cmd_done); | 
 | } | 
 |  | 
 | /* Interrupt callback */ | 
 | static void scarlett2_notify(struct urb *urb) | 
 | { | 
 | 	struct usb_mixer_interface *mixer = urb->context; | 
 | 	int len = urb->actual_length; | 
 | 	int ustatus = urb->status; | 
 | 	u32 data; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	const struct scarlett2_notification *notifications = | 
 | 		private->config_set->notifications; | 
 |  | 
 | 	if (ustatus != 0 || len != 8) | 
 | 		goto requeue; | 
 |  | 
 | 	data = le32_to_cpu(*(__le32 *)urb->transfer_buffer); | 
 |  | 
 | 	/* Ignore notifications except ACK during initialisation. | 
 | 	 * ACK is 0x00000001 on every device. | 
 | 	 */ | 
 | 	if (private->running < 2) | 
 | 		data &= 1; | 
 |  | 
 | 	while (data && notifications->mask) { | 
 | 		if (data & notifications->mask) { | 
 | 			data &= ~notifications->mask; | 
 | 			if (notifications->func) | 
 | 				notifications->func(mixer); | 
 | 		} | 
 | 		notifications++; | 
 | 	} | 
 |  | 
 | 	if (data) | 
 | 		usb_audio_warn(mixer->chip, | 
 | 			       "%s: Unhandled notification: 0x%08x\n", | 
 | 			       __func__, data); | 
 |  | 
 | requeue: | 
 | 	if (ustatus != -ENOENT && | 
 | 	    ustatus != -ECONNRESET && | 
 | 	    ustatus != -ESHUTDOWN) { | 
 | 		urb->dev = mixer->chip->dev; | 
 | 		usb_submit_urb(urb, GFP_ATOMIC); | 
 | 	} else { | 
 | 		complete(&private->cmd_done); | 
 | 	} | 
 | } | 
 |  | 
 | /*** Cleanup/Suspend Callbacks ***/ | 
 |  | 
 | static void scarlett2_private_free(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 |  | 
 | 	cancel_delayed_work_sync(&private->work); | 
 | 	kfree(private); | 
 | 	mixer->private_data = NULL; | 
 | } | 
 |  | 
 | static void scarlett2_private_suspend(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 |  | 
 | 	if (cancel_delayed_work_sync(&private->work)) | 
 | 		scarlett2_config_save(private->mixer); | 
 | } | 
 |  | 
 | /*** Initialisation ***/ | 
 |  | 
 | static void scarlett2_count_io(struct scarlett2_data *private) | 
 | { | 
 | 	const struct scarlett2_device_info *info = private->info; | 
 | 	const struct scarlett2_config_set *config_set = info->config_set; | 
 | 	const int (*port_count)[SCARLETT2_PORT_DIRNS] = info->port_count; | 
 | 	int port_type, srcs = 0, dsts = 0, i; | 
 |  | 
 | 	/* Count the number of mux sources and destinations */ | 
 | 	for (port_type = 0; | 
 | 	     port_type < SCARLETT2_PORT_TYPE_COUNT; | 
 | 	     port_type++) { | 
 | 		srcs += port_count[port_type][SCARLETT2_PORT_IN]; | 
 | 		dsts += port_count[port_type][SCARLETT2_PORT_OUT]; | 
 | 	} | 
 |  | 
 | 	private->num_mux_srcs = srcs; | 
 | 	private->num_mux_dsts = dsts; | 
 |  | 
 | 	/* Mixer inputs are mux outputs and vice versa. | 
 | 	 * Scarlett Gen 4 DSP I/O uses SCARLETT2_PORT_TYPE_MIX but | 
 | 	 * doesn't have mixer controls. | 
 | 	 */ | 
 | 	private->num_mix_in = | 
 | 		port_count[SCARLETT2_PORT_TYPE_MIX][SCARLETT2_PORT_OUT] - | 
 | 			info->dsp_count; | 
 |  | 
 | 	private->num_mix_out = | 
 | 		port_count[SCARLETT2_PORT_TYPE_MIX][SCARLETT2_PORT_IN] - | 
 | 			info->dsp_count; | 
 |  | 
 | 	/* Number of analogue line outputs */ | 
 | 	private->num_line_out = | 
 | 		port_count[SCARLETT2_PORT_TYPE_ANALOGUE][SCARLETT2_PORT_OUT]; | 
 |  | 
 | 	/* Number of monitor mix controls */ | 
 | 	private->num_monitor_mix_ctls = | 
 | 		info->direct_monitor * 2 * private->num_mix_in; | 
 |  | 
 | 	/* Number of autogain status texts */ | 
 | 	if (config_set->autogain_status_texts) { | 
 | 		const char * const *texts = config_set->autogain_status_texts; | 
 |  | 
 | 		for (i = 0; texts[i]; i++) | 
 | 			; | 
 | 		private->num_autogain_status_texts = i; | 
 | 	} | 
 | } | 
 |  | 
 | /* Look through the interface descriptors for the Focusrite Control | 
 |  * interface (bInterfaceClass = 255 Vendor Specific Class) and set | 
 |  * bInterfaceNumber, bEndpointAddress, wMaxPacketSize, and bInterval | 
 |  * in private | 
 |  */ | 
 | static int scarlett2_find_fc_interface(struct usb_device *dev, | 
 | 				       struct scarlett2_data *private) | 
 | { | 
 | 	struct usb_host_config *config = dev->actconfig; | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < config->desc.bNumInterfaces; i++) { | 
 | 		struct usb_interface *intf = config->interface[i]; | 
 | 		struct usb_interface_descriptor *desc = | 
 | 			&intf->altsetting[0].desc; | 
 | 		struct usb_endpoint_descriptor *epd; | 
 |  | 
 | 		if (desc->bInterfaceClass != 255) | 
 | 			continue; | 
 |  | 
 | 		epd = get_endpoint(intf->altsetting, 0); | 
 | 		private->bInterfaceNumber = desc->bInterfaceNumber; | 
 | 		private->bEndpointAddress = usb_endpoint_num(epd); | 
 | 		private->wMaxPacketSize = le16_to_cpu(epd->wMaxPacketSize); | 
 | 		private->bInterval = epd->bInterval; | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	return -EINVAL; | 
 | } | 
 |  | 
 | /* Initialise private data */ | 
 | static int scarlett2_init_private(struct usb_mixer_interface *mixer, | 
 | 				  const struct scarlett2_device_entry *entry) | 
 | { | 
 | 	struct scarlett2_data *private = | 
 | 		kzalloc(sizeof(struct scarlett2_data), GFP_KERNEL); | 
 |  | 
 | 	if (!private) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	mutex_init(&private->usb_mutex); | 
 | 	mutex_init(&private->data_mutex); | 
 | 	INIT_DELAYED_WORK(&private->work, scarlett2_config_save_work); | 
 |  | 
 | 	mixer->private_data = private; | 
 | 	mixer->private_free = scarlett2_private_free; | 
 | 	mixer->private_suspend = scarlett2_private_suspend; | 
 |  | 
 | 	private->info = entry->info; | 
 | 	private->config_set = entry->info->config_set; | 
 | 	private->series_name = entry->series_name; | 
 | 	scarlett2_count_io(private); | 
 | 	private->scarlett2_seq = 0; | 
 | 	private->mixer = mixer; | 
 |  | 
 | 	return scarlett2_find_fc_interface(mixer->chip->dev, private); | 
 | } | 
 |  | 
 | /* Submit a URB to receive notifications from the device */ | 
 | static int scarlett2_init_notify(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct usb_device *dev = mixer->chip->dev; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	unsigned int pipe = usb_rcvintpipe(dev, private->bEndpointAddress); | 
 | 	void *transfer_buffer; | 
 |  | 
 | 	if (mixer->urb) { | 
 | 		usb_audio_err(mixer->chip, | 
 | 			      "%s: mixer urb already in use!\n", __func__); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	if (usb_pipe_type_check(dev, pipe)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	mixer->urb = usb_alloc_urb(0, GFP_KERNEL); | 
 | 	if (!mixer->urb) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	transfer_buffer = kmalloc(private->wMaxPacketSize, GFP_KERNEL); | 
 | 	if (!transfer_buffer) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	usb_fill_int_urb(mixer->urb, dev, pipe, | 
 | 			 transfer_buffer, private->wMaxPacketSize, | 
 | 			 scarlett2_notify, mixer, private->bInterval); | 
 |  | 
 | 	init_completion(&private->cmd_done); | 
 |  | 
 | 	return usb_submit_urb(mixer->urb, GFP_KERNEL); | 
 | } | 
 |  | 
 | /* Cargo cult proprietary initialisation sequence */ | 
 | static int scarlett2_usb_init(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct usb_device *dev = mixer->chip->dev; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	u8 step0_buf[24]; | 
 | 	u8 step2_buf[84]; | 
 | 	int err; | 
 |  | 
 | 	if (usb_pipe_type_check(dev, usb_sndctrlpipe(dev, 0))) | 
 | 		return -EINVAL; | 
 |  | 
 | 	/* step 0 */ | 
 | 	err = scarlett2_usb_rx(dev, private->bInterfaceNumber, | 
 | 			       SCARLETT2_USB_CMD_INIT, | 
 | 			       step0_buf, sizeof(step0_buf)); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	/* Set up the interrupt polling for notifications. | 
 | 	 * When running is: | 
 | 	 * 0: all notifications are ignored | 
 | 	 * 1: only ACKs are handled | 
 | 	 * 2: all notifications are handled | 
 | 	 */ | 
 | 	err = scarlett2_init_notify(mixer); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	/* sleep for a moment in case of an outstanding ACK */ | 
 | 	msleep(20); | 
 |  | 
 | 	/* start handling ACKs, but no other notifications until the | 
 | 	 * ALSA controls have been created | 
 | 	 */ | 
 | 	private->running = 1; | 
 |  | 
 | 	/* step 1 */ | 
 | 	private->scarlett2_seq = 1; | 
 | 	err = scarlett2_usb(mixer, SCARLETT2_USB_INIT_1, NULL, 0, NULL, 0); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	/* step 2 */ | 
 | 	private->scarlett2_seq = 1; | 
 | 	err = scarlett2_usb(mixer, SCARLETT2_USB_INIT_2, | 
 | 			    NULL, 0, | 
 | 			    step2_buf, sizeof(step2_buf)); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	/* extract 4-byte firmware version from step2_buf[8] */ | 
 | 	private->firmware_version = le32_to_cpu(*(__le32 *)(step2_buf + 8)); | 
 | 	usb_audio_info(mixer->chip, | 
 | 		       "Firmware version %d\n", | 
 | 		       private->firmware_version); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* Get the flash segment numbers for the App_Settings and App_Upgrade | 
 |  * segments and put them in the private data | 
 |  */ | 
 | static int scarlett2_get_flash_segment_nums(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	int err, count, i; | 
 |  | 
 | 	struct { | 
 | 		__le32 size; | 
 | 		__le32 count; | 
 | 		u8 unknown[8]; | 
 | 	} __packed flash_info; | 
 |  | 
 | 	struct { | 
 | 		__le32 size; | 
 | 		__le32 flags; | 
 | 		char name[16]; | 
 | 	} __packed segment_info; | 
 |  | 
 | 	err = scarlett2_usb(mixer, SCARLETT2_USB_INFO_FLASH, | 
 | 			    NULL, 0, | 
 | 			    &flash_info, sizeof(flash_info)); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	count = le32_to_cpu(flash_info.count); | 
 |  | 
 | 	/* sanity check count */ | 
 | 	if (count < SCARLETT2_SEGMENT_NUM_MIN || | 
 | 	    count > SCARLETT2_SEGMENT_NUM_MAX + 1) { | 
 | 		usb_audio_err(mixer->chip, | 
 | 			      "invalid flash segment count: %d\n", count); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	for (i = 0; i < count; i++) { | 
 | 		__le32 segment_num_req = cpu_to_le32(i); | 
 | 		int flash_segment_id; | 
 |  | 
 | 		err = scarlett2_usb(mixer, SCARLETT2_USB_INFO_SEGMENT, | 
 | 				    &segment_num_req, sizeof(segment_num_req), | 
 | 				    &segment_info, sizeof(segment_info)); | 
 | 		if (err < 0) { | 
 | 			usb_audio_err(mixer->chip, | 
 | 				"failed to get flash segment info %d: %d\n", | 
 | 				i, err); | 
 | 			return err; | 
 | 		} | 
 |  | 
 | 		if (!strncmp(segment_info.name, | 
 | 			     SCARLETT2_SEGMENT_SETTINGS_NAME, 16)) | 
 | 			flash_segment_id = SCARLETT2_SEGMENT_ID_SETTINGS; | 
 | 		else if (!strncmp(segment_info.name, | 
 | 				  SCARLETT2_SEGMENT_FIRMWARE_NAME, 16)) | 
 | 			flash_segment_id = SCARLETT2_SEGMENT_ID_FIRMWARE; | 
 | 		else | 
 | 			continue; | 
 |  | 
 | 		private->flash_segment_nums[flash_segment_id] = i; | 
 | 		private->flash_segment_blocks[flash_segment_id] = | 
 | 			le32_to_cpu(segment_info.size) / | 
 | 				SCARLETT2_FLASH_BLOCK_SIZE; | 
 | 	} | 
 |  | 
 | 	/* segment 0 is App_Gold and we never want to touch that, so | 
 | 	 * use 0 as the "not-found" value | 
 | 	 */ | 
 | 	if (!private->flash_segment_nums[SCARLETT2_SEGMENT_ID_SETTINGS]) { | 
 | 		usb_audio_err(mixer->chip, | 
 | 			      "failed to find flash segment %s\n", | 
 | 			      SCARLETT2_SEGMENT_SETTINGS_NAME); | 
 | 		return -EINVAL; | 
 | 	} | 
 | 	if (!private->flash_segment_nums[SCARLETT2_SEGMENT_ID_FIRMWARE]) { | 
 | 		usb_audio_err(mixer->chip, | 
 | 			      "failed to find flash segment %s\n", | 
 | 			      SCARLETT2_SEGMENT_FIRMWARE_NAME); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* Read configuration from the interface on start */ | 
 | static int scarlett2_read_configs(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	const struct scarlett2_device_info *info = private->info; | 
 | 	int err, i; | 
 |  | 
 | 	if (scarlett2_has_config_item(private, SCARLETT2_CONFIG_MSD_SWITCH)) { | 
 | 		err = scarlett2_usb_get_config( | 
 | 			mixer, SCARLETT2_CONFIG_MSD_SWITCH, | 
 | 			1, &private->msd_switch); | 
 | 		if (err < 0) | 
 | 			return err; | 
 | 	} | 
 |  | 
 | 	if (private->firmware_version < info->min_firmware_version) { | 
 | 		usb_audio_err(mixer->chip, | 
 | 			      "Focusrite %s firmware version %d is too old; " | 
 | 			      "need %d", | 
 | 			      private->series_name, | 
 | 			      private->firmware_version, | 
 | 			      info->min_firmware_version); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	/* no other controls are created if MSD mode is on */ | 
 | 	if (private->msd_switch) | 
 | 		return 0; | 
 |  | 
 | 	err = scarlett2_update_input_level(mixer); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	err = scarlett2_update_input_pad(mixer); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	err = scarlett2_update_input_air(mixer); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	err = scarlett2_update_input_dsp(mixer); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	err = scarlett2_update_compressor_values(mixer); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	err = scarlett2_update_filter_values(mixer); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	err = scarlett2_update_input_mute(mixer); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	err = scarlett2_update_input_phantom(mixer); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	err = scarlett2_update_direct_monitor(mixer); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	/* the rest of the configuration is for devices with a mixer */ | 
 | 	if (!scarlett2_has_mixer(private)) | 
 | 		return 0; | 
 |  | 
 | 	err = scarlett2_update_monitor_mix(mixer); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	err = scarlett2_update_monitor_other(mixer); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	if (scarlett2_has_config_item(private, | 
 | 				      SCARLETT2_CONFIG_STANDALONE_SWITCH)) { | 
 | 		err = scarlett2_usb_get_config( | 
 | 			mixer, SCARLETT2_CONFIG_STANDALONE_SWITCH, | 
 | 			1, &private->standalone_switch); | 
 | 		if (err < 0) | 
 | 			return err; | 
 | 	} | 
 |  | 
 | 	if (scarlett2_has_config_item(private, | 
 | 				      SCARLETT2_CONFIG_POWER_EXT)) { | 
 | 		err = scarlett2_update_power_status(mixer); | 
 | 		if (err < 0) | 
 | 			return err; | 
 | 	} | 
 |  | 
 | 	err = scarlett2_update_sync(mixer); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	if (scarlett2_has_config_item(private, | 
 | 				      SCARLETT2_CONFIG_LINE_OUT_VOLUME)) { | 
 | 		s16 sw_vol[SCARLETT2_ANALOGUE_MAX]; | 
 |  | 
 | 		/* read SW line out volume */ | 
 | 		err = scarlett2_usb_get_config( | 
 | 			mixer, SCARLETT2_CONFIG_LINE_OUT_VOLUME, | 
 | 			private->num_line_out, &sw_vol); | 
 | 		if (err < 0) | 
 | 			return err; | 
 |  | 
 | 		for (i = 0; i < private->num_line_out; i++) | 
 | 			private->vol[i] = clamp( | 
 | 				sw_vol[i] + SCARLETT2_VOLUME_BIAS, | 
 | 				0, SCARLETT2_VOLUME_BIAS); | 
 |  | 
 | 		/* read SW mute */ | 
 | 		err = scarlett2_usb_get_config( | 
 | 			mixer, SCARLETT2_CONFIG_MUTE_SWITCH, | 
 | 			private->num_line_out, &private->mute_switch); | 
 | 		if (err < 0) | 
 | 			return err; | 
 |  | 
 | 		for (i = 0; i < private->num_line_out; i++) | 
 | 			private->mute_switch[i] = | 
 | 				!!private->mute_switch[i]; | 
 |  | 
 | 		/* read SW/HW switches */ | 
 | 		if (scarlett2_has_config_item(private, | 
 | 					      SCARLETT2_CONFIG_SW_HW_SWITCH)) { | 
 | 			err = scarlett2_usb_get_config( | 
 | 				mixer, SCARLETT2_CONFIG_SW_HW_SWITCH, | 
 | 				private->num_line_out, | 
 | 				&private->vol_sw_hw_switch); | 
 | 			if (err < 0) | 
 | 				return err; | 
 |  | 
 | 			for (i = 0; i < private->num_line_out; i++) | 
 | 				private->vol_sw_hw_switch[i] = | 
 | 					!!private->vol_sw_hw_switch[i]; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	err = scarlett2_update_volumes(mixer); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	err = scarlett2_update_dim_mute(mixer); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	err = scarlett2_update_input_select(mixer); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	err = scarlett2_update_input_gain(mixer); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	err = scarlett2_update_autogain(mixer); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	err = scarlett2_update_input_safe(mixer); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	if (scarlett2_has_config_item(private, | 
 | 				      SCARLETT2_CONFIG_PCM_INPUT_SWITCH)) { | 
 | 		err = scarlett2_update_pcm_input_switch(mixer); | 
 | 		if (err < 0) | 
 | 			return err; | 
 | 	} | 
 |  | 
 | 	err = scarlett2_update_bluetooth_volume(mixer); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	err = scarlett2_update_spdif_mode(mixer); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	err = scarlett2_update_mix(mixer); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	return scarlett2_usb_get_mux(mixer); | 
 | } | 
 |  | 
 | static const struct scarlett2_device_entry *get_scarlett2_device_entry( | 
 | 	struct usb_mixer_interface *mixer) | 
 | { | 
 | 	const struct scarlett2_device_entry *entry = scarlett2_devices; | 
 |  | 
 | 	/* Find entry in scarlett2_devices */ | 
 | 	while (entry->usb_id && entry->usb_id != mixer->chip->usb_id) | 
 | 		entry++; | 
 | 	if (!entry->usb_id) | 
 | 		return NULL; | 
 |  | 
 | 	return entry; | 
 | } | 
 |  | 
 | static int snd_scarlett2_controls_create( | 
 | 	struct usb_mixer_interface *mixer, | 
 | 	const struct scarlett2_device_entry *entry) | 
 | { | 
 | 	struct scarlett2_data *private; | 
 | 	int err; | 
 |  | 
 | 	/* Initialise private data */ | 
 | 	err = scarlett2_init_private(mixer, entry); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	private = mixer->private_data; | 
 |  | 
 | 	/* Send proprietary USB initialisation sequence */ | 
 | 	err = scarlett2_usb_init(mixer); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	/* Get the upgrade & settings flash segment numbers */ | 
 | 	err = scarlett2_get_flash_segment_nums(mixer); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	/* Add firmware version control */ | 
 | 	err = scarlett2_add_firmware_version_ctl(mixer); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	/* Add minimum firmware version control */ | 
 | 	err = scarlett2_add_min_firmware_version_ctl(mixer); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	/* Read volume levels and controls from the interface */ | 
 | 	err = scarlett2_read_configs(mixer); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	/* Create the MSD control */ | 
 | 	err = scarlett2_add_msd_ctl(mixer); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	/* If MSD mode is enabled, or if the firmware version is too | 
 | 	 * old, don't create any other controls | 
 | 	 */ | 
 | 	if (private->msd_switch || | 
 | 	    private->firmware_version < private->info->min_firmware_version) | 
 | 		return 0; | 
 |  | 
 | 	/* Create the analogue output controls */ | 
 | 	err = scarlett2_add_line_out_ctls(mixer); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	/* Create the analogue input controls */ | 
 | 	err = scarlett2_add_line_in_ctls(mixer); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	/* Create the input, output, and mixer mux input selections */ | 
 | 	err = scarlett2_add_mux_enums(mixer); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	/* Create the matrix mixer controls */ | 
 | 	err = scarlett2_add_mixer_ctls(mixer); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	/* Create the level meter controls */ | 
 | 	err = scarlett2_add_meter_ctl(mixer); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	/* Create the sync control */ | 
 | 	err = scarlett2_add_sync_ctl(mixer); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	/* Create the direct monitor control(s) */ | 
 | 	err = scarlett2_add_direct_monitor_ctls(mixer); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	/* Create the speaker switching control */ | 
 | 	err = scarlett2_add_speaker_switch_ctl(mixer); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	/* Create the talkback controls */ | 
 | 	err = scarlett2_add_talkback_ctls(mixer); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	/* Create the standalone control */ | 
 | 	err = scarlett2_add_standalone_ctl(mixer); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	/* Create the power status control */ | 
 | 	err = scarlett2_add_power_status_ctl(mixer); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	/* Create the Bluetooth volume control */ | 
 | 	err = scarlett2_add_bluetooth_volume_ctl(mixer); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	/* Create the S/PDIF mode control */ | 
 | 	err = scarlett2_add_spdif_mode_ctl(mixer); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	/* Set the access mode of controls disabled during | 
 | 	 * autogain/phantom power switching. | 
 | 	 */ | 
 | 	if (private->info->gain_input_count) { | 
 | 		scarlett2_autogain_update_access(mixer); | 
 | 		scarlett2_phantom_update_access(mixer); | 
 | 	} | 
 |  | 
 | 	/* Start handling all notifications */ | 
 | 	private->running = 2; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /*** hwdep interface ***/ | 
 |  | 
 | /* Set private->hwdep_in_use; prevents access to the ALSA controls | 
 |  * while doing a config erase/firmware upgrade. | 
 |  */ | 
 | static void scarlett2_lock(struct scarlett2_data *private) | 
 | { | 
 | 	mutex_lock(&private->data_mutex); | 
 | 	private->hwdep_in_use = 1; | 
 | 	mutex_unlock(&private->data_mutex); | 
 | } | 
 |  | 
 | /* Call SCARLETT2_USB_GET_ERASE to get the erase progress */ | 
 | static int scarlett2_get_erase_progress(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	int segment_id, segment_num, err; | 
 | 	u8 erase_resp; | 
 |  | 
 | 	struct { | 
 | 		__le32 segment_num; | 
 | 		__le32 pad; | 
 | 	} __packed erase_req; | 
 |  | 
 | 	segment_id = private->selected_flash_segment_id; | 
 | 	segment_num = private->flash_segment_nums[segment_id]; | 
 |  | 
 | 	if (segment_num < SCARLETT2_SEGMENT_NUM_MIN || | 
 | 	    segment_num > SCARLETT2_SEGMENT_NUM_MAX) | 
 | 		return -EFAULT; | 
 |  | 
 | 	/* Send the erase progress request */ | 
 | 	erase_req.segment_num = cpu_to_le32(segment_num); | 
 | 	erase_req.pad = 0; | 
 |  | 
 | 	err = scarlett2_usb(mixer, SCARLETT2_USB_GET_ERASE, | 
 | 			    &erase_req, sizeof(erase_req), | 
 | 			    &erase_resp, sizeof(erase_resp)); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	return erase_resp; | 
 | } | 
 |  | 
 | /* Repeatedly call scarlett2_get_erase_progress() until it returns | 
 |  * 0xff (erase complete) or we've waited 10 seconds (it usually takes | 
 |  * <3 seconds). | 
 |  */ | 
 | static int scarlett2_wait_for_erase(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	int i, err; | 
 |  | 
 | 	for (i = 0; i < 100; i++) { | 
 | 		err = scarlett2_get_erase_progress(mixer); | 
 | 		if (err < 0) | 
 | 			return err; | 
 |  | 
 | 		if (err == 0xff) | 
 | 			return 0; | 
 |  | 
 | 		msleep(100); | 
 | 	} | 
 |  | 
 | 	return -ETIMEDOUT; | 
 | } | 
 |  | 
 | /* Reboot the device; wait for the erase to complete if one is in | 
 |  * progress. | 
 |  */ | 
 | static int scarlett2_reboot(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 |  | 
 | 	if (private->flash_write_state == | 
 | 	      SCARLETT2_FLASH_WRITE_STATE_ERASING) { | 
 | 		int err = scarlett2_wait_for_erase(mixer); | 
 |  | 
 | 		if (err < 0) | 
 | 			return err; | 
 | 	} | 
 |  | 
 | 	return scarlett2_usb(mixer, SCARLETT2_USB_REBOOT, NULL, 0, NULL, 0); | 
 | } | 
 |  | 
 | /* Select a flash segment for reading/erasing/writing */ | 
 | static int scarlett2_ioctl_select_flash_segment( | 
 | 	struct usb_mixer_interface *mixer, | 
 | 	unsigned long arg) | 
 | { | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	int segment_id, segment_num; | 
 |  | 
 | 	if (get_user(segment_id, (int __user *)arg)) | 
 | 		return -EFAULT; | 
 |  | 
 | 	/* Check the segment ID and segment number */ | 
 | 	if (segment_id < 0 || segment_id >= SCARLETT2_SEGMENT_ID_COUNT) | 
 | 		return -EINVAL; | 
 |  | 
 | 	segment_num = private->flash_segment_nums[segment_id]; | 
 | 	if (segment_num < SCARLETT2_SEGMENT_NUM_MIN || | 
 | 	    segment_num > SCARLETT2_SEGMENT_NUM_MAX) { | 
 | 		usb_audio_err(mixer->chip, | 
 | 			      "%s: invalid segment number %d\n", | 
 | 			      __func__, segment_id); | 
 | 		return -EFAULT; | 
 | 	} | 
 |  | 
 | 	/* If erasing, wait for it to complete */ | 
 | 	if (private->flash_write_state == SCARLETT2_FLASH_WRITE_STATE_ERASING) { | 
 | 		int err = scarlett2_wait_for_erase(mixer); | 
 |  | 
 | 		if (err < 0) | 
 | 			return err; | 
 | 	} | 
 |  | 
 | 	/* Save the selected segment ID and set the state to SELECTED */ | 
 | 	private->selected_flash_segment_id = segment_id; | 
 | 	private->flash_write_state = SCARLETT2_FLASH_WRITE_STATE_SELECTED; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* Erase the previously-selected flash segment */ | 
 | static int scarlett2_ioctl_erase_flash_segment( | 
 | 	struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	int segment_id, segment_num, err; | 
 |  | 
 | 	struct { | 
 | 		__le32 segment_num; | 
 | 		__le32 pad; | 
 | 	} __packed erase_req; | 
 |  | 
 | 	if (private->flash_write_state != SCARLETT2_FLASH_WRITE_STATE_SELECTED) | 
 | 		return -EINVAL; | 
 |  | 
 | 	segment_id = private->selected_flash_segment_id; | 
 | 	segment_num = private->flash_segment_nums[segment_id]; | 
 |  | 
 | 	if (segment_num < SCARLETT2_SEGMENT_NUM_MIN || | 
 | 	    segment_num > SCARLETT2_SEGMENT_NUM_MAX) | 
 | 		return -EFAULT; | 
 |  | 
 | 	/* Prevent access to ALSA controls that access the device from | 
 | 	 * here on | 
 | 	 */ | 
 | 	scarlett2_lock(private); | 
 |  | 
 | 	/* Send the erase request */ | 
 | 	erase_req.segment_num = cpu_to_le32(segment_num); | 
 | 	erase_req.pad = 0; | 
 |  | 
 | 	err = scarlett2_usb(mixer, SCARLETT2_USB_ERASE_SEGMENT, | 
 | 			    &erase_req, sizeof(erase_req), | 
 | 			    NULL, 0); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	/* On success, change the state from SELECTED to ERASING */ | 
 | 	private->flash_write_state = SCARLETT2_FLASH_WRITE_STATE_ERASING; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* Get the erase progress from the device */ | 
 | static int scarlett2_ioctl_get_erase_progress( | 
 | 	struct usb_mixer_interface *mixer, | 
 | 	unsigned long arg) | 
 | { | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	struct scarlett2_flash_segment_erase_progress progress; | 
 | 	int segment_id, segment_num, err; | 
 | 	u8 erase_resp; | 
 |  | 
 | 	struct { | 
 | 		__le32 segment_num; | 
 | 		__le32 pad; | 
 | 	} __packed erase_req; | 
 |  | 
 | 	/* Check that we're erasing */ | 
 | 	if (private->flash_write_state != SCARLETT2_FLASH_WRITE_STATE_ERASING) | 
 | 		return -EINVAL; | 
 |  | 
 | 	segment_id = private->selected_flash_segment_id; | 
 | 	segment_num = private->flash_segment_nums[segment_id]; | 
 |  | 
 | 	if (segment_num < SCARLETT2_SEGMENT_NUM_MIN || | 
 | 	    segment_num > SCARLETT2_SEGMENT_NUM_MAX) | 
 | 		return -EFAULT; | 
 |  | 
 | 	/* Send the erase progress request */ | 
 | 	erase_req.segment_num = cpu_to_le32(segment_num); | 
 | 	erase_req.pad = 0; | 
 |  | 
 | 	err = scarlett2_usb(mixer, SCARLETT2_USB_GET_ERASE, | 
 | 			    &erase_req, sizeof(erase_req), | 
 | 			    &erase_resp, sizeof(erase_resp)); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	progress.progress = erase_resp; | 
 | 	progress.num_blocks = private->flash_segment_blocks[segment_id]; | 
 |  | 
 | 	if (copy_to_user((void __user *)arg, &progress, sizeof(progress))) | 
 | 		return -EFAULT; | 
 |  | 
 | 	/* If the erase is complete, change the state from ERASING to | 
 | 	 * WRITE. | 
 | 	 */ | 
 | 	if (progress.progress == 0xff) | 
 | 		private->flash_write_state = SCARLETT2_FLASH_WRITE_STATE_WRITE; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int scarlett2_hwdep_open(struct snd_hwdep *hw, struct file *file) | 
 | { | 
 | 	struct usb_mixer_interface *mixer = hw->private_data; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 |  | 
 | 	/* If erasing, wait for it to complete */ | 
 | 	if (private->flash_write_state == | 
 | 	      SCARLETT2_FLASH_WRITE_STATE_ERASING) { | 
 | 		int err = scarlett2_wait_for_erase(mixer); | 
 |  | 
 | 		if (err < 0) | 
 | 			return err; | 
 | 	} | 
 |  | 
 | 	/* Set the state to IDLE */ | 
 | 	private->flash_write_state = SCARLETT2_FLASH_WRITE_STATE_IDLE; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int scarlett2_hwdep_ioctl(struct snd_hwdep *hw, struct file *file, | 
 | 				 unsigned int cmd, unsigned long arg) | 
 | { | 
 | 	struct usb_mixer_interface *mixer = hw->private_data; | 
 |  | 
 | 	switch (cmd) { | 
 |  | 
 | 	case SCARLETT2_IOCTL_PVERSION: | 
 | 		return put_user(SCARLETT2_HWDEP_VERSION, | 
 | 				(int __user *)arg) ? -EFAULT : 0; | 
 |  | 
 | 	case SCARLETT2_IOCTL_REBOOT: | 
 | 		return scarlett2_reboot(mixer); | 
 |  | 
 | 	case SCARLETT2_IOCTL_SELECT_FLASH_SEGMENT: | 
 | 		return scarlett2_ioctl_select_flash_segment(mixer, arg); | 
 |  | 
 | 	case SCARLETT2_IOCTL_ERASE_FLASH_SEGMENT: | 
 | 		return scarlett2_ioctl_erase_flash_segment(mixer); | 
 |  | 
 | 	case SCARLETT2_IOCTL_GET_ERASE_PROGRESS: | 
 | 		return scarlett2_ioctl_get_erase_progress(mixer, arg); | 
 |  | 
 | 	default: | 
 | 		return -ENOIOCTLCMD; | 
 | 	} | 
 | } | 
 |  | 
 | static long scarlett2_hwdep_read(struct snd_hwdep *hw, | 
 | 				 char __user *buf, | 
 | 				 long count, loff_t *offset) | 
 | { | 
 | 	struct usb_mixer_interface *mixer = hw->private_data; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	int segment_id, segment_num, err; | 
 | 	int flash_size; | 
 |  | 
 | 	/* SCARLETT2_USB_READ_SEGMENT request data */ | 
 | 	struct { | 
 | 		__le32 segment_num; | 
 | 		__le32 offset; | 
 | 		__le32 len; | 
 | 	} __packed req; | 
 |  | 
 | 	u8 *resp; | 
 |  | 
 | 	/* Flash segment must first be selected */ | 
 | 	if (private->flash_write_state != SCARLETT2_FLASH_WRITE_STATE_SELECTED) | 
 | 		return -EINVAL; | 
 |  | 
 | 	/* Get the selected flash segment number */ | 
 | 	segment_id = private->selected_flash_segment_id; | 
 | 	if (segment_id < 0 || segment_id >= SCARLETT2_SEGMENT_ID_COUNT) | 
 | 		return -EINVAL; | 
 |  | 
 | 	segment_num = private->flash_segment_nums[segment_id]; | 
 | 	if (segment_num < 0 || | 
 | 	    segment_num > SCARLETT2_SEGMENT_NUM_MAX) | 
 | 		return -EFAULT; | 
 |  | 
 | 	/* Validate the offset and count */ | 
 | 	if (count < 0 || *offset < 0) | 
 | 		return -EINVAL; | 
 |  | 
 | 	/* Reached EOF? */ | 
 | 	flash_size = private->flash_segment_blocks[segment_id] * | 
 | 		     SCARLETT2_FLASH_BLOCK_SIZE; | 
 | 	if (!count || *offset >= flash_size) | 
 | 		return 0; | 
 |  | 
 | 	/* Limit the numbers of bytes read to SCARLETT2_FLASH_RW_MAX */ | 
 | 	if (count > SCARLETT2_FLASH_RW_MAX) | 
 | 		count = SCARLETT2_FLASH_RW_MAX; | 
 |  | 
 | 	/* Limit read to EOF */ | 
 | 	if (*offset + count >= flash_size) | 
 | 		count = flash_size - *offset; | 
 |  | 
 | 	/* Create and send the request */ | 
 | 	req.segment_num = cpu_to_le32(segment_num); | 
 | 	req.offset = cpu_to_le32(*offset); | 
 | 	req.len = cpu_to_le32(count); | 
 |  | 
 | 	resp = kzalloc(count, GFP_KERNEL); | 
 | 	if (!resp) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	err = scarlett2_usb(mixer, SCARLETT2_USB_READ_SEGMENT, | 
 | 			    &req, sizeof(req), resp, count); | 
 | 	if (err < 0) | 
 | 		goto error; | 
 |  | 
 | 	/* Copy the response to userspace */ | 
 | 	if (copy_to_user(buf, resp, count)) { | 
 | 		err = -EFAULT; | 
 | 		goto error; | 
 | 	} | 
 |  | 
 | 	*offset += count; | 
 | 	err = count; | 
 |  | 
 | error: | 
 | 	kfree(resp); | 
 | 	return err; | 
 | } | 
 |  | 
 | static long scarlett2_hwdep_write(struct snd_hwdep *hw, | 
 | 				  const char __user *buf, | 
 | 				  long count, loff_t *offset) | 
 | { | 
 | 	struct usb_mixer_interface *mixer = hw->private_data; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	int segment_id, segment_num, err, len; | 
 | 	int flash_size; | 
 |  | 
 | 	/* SCARLETT2_USB_WRITE_SEGMENT request data */ | 
 | 	struct { | 
 | 		__le32 segment_num; | 
 | 		__le32 offset; | 
 | 		__le32 pad; | 
 | 		u8 data[]; | 
 | 	} __packed *req; | 
 |  | 
 | 	/* Calculate the maximum permitted in data[] */ | 
 | 	const size_t max_data_size = SCARLETT2_FLASH_RW_MAX - | 
 | 				     offsetof(typeof(*req), data); | 
 |  | 
 | 	/* If erasing, wait for it to complete */ | 
 | 	if (private->flash_write_state == | 
 | 	      SCARLETT2_FLASH_WRITE_STATE_ERASING) { | 
 | 		err = scarlett2_wait_for_erase(mixer); | 
 | 		if (err < 0) | 
 | 			return err; | 
 | 		private->flash_write_state = SCARLETT2_FLASH_WRITE_STATE_WRITE; | 
 |  | 
 | 	/* Check that an erase has been done & completed */ | 
 | 	} else if (private->flash_write_state != | 
 | 		     SCARLETT2_FLASH_WRITE_STATE_WRITE) { | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	/* Check that we're writing to the upgrade firmware */ | 
 | 	segment_id = private->selected_flash_segment_id; | 
 | 	if (segment_id != SCARLETT2_SEGMENT_ID_FIRMWARE) | 
 | 		return -EINVAL; | 
 |  | 
 | 	segment_num = private->flash_segment_nums[segment_id]; | 
 | 	if (segment_num < SCARLETT2_SEGMENT_NUM_MIN || | 
 | 	    segment_num > SCARLETT2_SEGMENT_NUM_MAX) | 
 | 		return -EFAULT; | 
 |  | 
 | 	/* Validate the offset and count */ | 
 | 	flash_size = private->flash_segment_blocks[segment_id] * | 
 | 		     SCARLETT2_FLASH_BLOCK_SIZE; | 
 |  | 
 | 	if (count < 0 || *offset < 0 || *offset + count >= flash_size) | 
 | 		return -ENOSPC; | 
 |  | 
 | 	if (!count) | 
 | 		return 0; | 
 |  | 
 | 	/* Limit the *req size to SCARLETT2_FLASH_RW_MAX */ | 
 | 	if (count > max_data_size) | 
 | 		count = max_data_size; | 
 |  | 
 | 	/* Create and send the request */ | 
 | 	len = struct_size(req, data, count); | 
 | 	req = kzalloc(len, GFP_KERNEL); | 
 | 	if (!req) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	req->segment_num = cpu_to_le32(segment_num); | 
 | 	req->offset = cpu_to_le32(*offset); | 
 | 	req->pad = 0; | 
 |  | 
 | 	if (copy_from_user(req->data, buf, count)) { | 
 | 		err = -EFAULT; | 
 | 		goto error; | 
 | 	} | 
 |  | 
 | 	err = scarlett2_usb(mixer, SCARLETT2_USB_WRITE_SEGMENT, | 
 | 			    req, len, NULL, 0); | 
 | 	if (err < 0) | 
 | 		goto error; | 
 |  | 
 | 	*offset += count; | 
 | 	err = count; | 
 |  | 
 | error: | 
 | 	kfree(req); | 
 | 	return err; | 
 | } | 
 |  | 
 | static int scarlett2_hwdep_release(struct snd_hwdep *hw, struct file *file) | 
 | { | 
 | 	struct usb_mixer_interface *mixer = hw->private_data; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 |  | 
 | 	/* Return from the SELECTED or WRITE state to IDLE. | 
 | 	 * The ERASING state is left as-is, and checked on next open. | 
 | 	 */ | 
 | 	if (private && | 
 | 	    private->hwdep_in_use && | 
 | 	    private->flash_write_state != SCARLETT2_FLASH_WRITE_STATE_ERASING) | 
 | 		private->flash_write_state = SCARLETT2_FLASH_WRITE_STATE_IDLE; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int scarlett2_hwdep_init(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct snd_hwdep *hw; | 
 | 	int err; | 
 |  | 
 | 	err = snd_hwdep_new(mixer->chip->card, "Focusrite Control", 0, &hw); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	hw->private_data = mixer; | 
 | 	hw->exclusive = 1; | 
 | 	hw->ops.open = scarlett2_hwdep_open; | 
 | 	hw->ops.ioctl = scarlett2_hwdep_ioctl; | 
 | 	hw->ops.read = scarlett2_hwdep_read; | 
 | 	hw->ops.write = scarlett2_hwdep_write; | 
 | 	hw->ops.release = scarlett2_hwdep_release; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /*** device-map file ***/ | 
 |  | 
 | static ssize_t scarlett2_devmap_read( | 
 | 	struct snd_info_entry *entry, | 
 | 	void                  *file_private_data, | 
 | 	struct file           *file, | 
 | 	char __user           *buf, | 
 | 	size_t                 count, | 
 | 	loff_t                 pos) | 
 | { | 
 | 	struct usb_mixer_interface *mixer = entry->private_data; | 
 | 	u8           *resp_buf; | 
 | 	const size_t  block_size = SCARLETT2_DEVMAP_BLOCK_SIZE; | 
 | 	size_t        copied = 0; | 
 |  | 
 | 	if (pos >= entry->size) | 
 | 		return 0; | 
 |  | 
 | 	if (pos + count > entry->size) | 
 | 		count = entry->size - pos; | 
 |  | 
 | 	resp_buf = kmalloc(block_size, GFP_KERNEL); | 
 | 	if (!resp_buf) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	while (count > 0) { | 
 | 		/* SCARLETT2_USB_GET_DEVMAP reads only on block boundaries, | 
 | 		 * so we need to read a whole block and copy the requested | 
 | 		 * chunk to userspace. | 
 | 		 */ | 
 |  | 
 | 		__le32 req; | 
 | 		int    err; | 
 |  | 
 | 		/* offset within the block that we're reading */ | 
 | 		size_t offset = pos % block_size; | 
 |  | 
 | 		/* read_size is block_size except for the last block */ | 
 | 		size_t block_start = pos - offset; | 
 | 		size_t read_size = min_t(size_t, | 
 | 					 block_size, | 
 | 					 entry->size - block_start); | 
 |  | 
 | 		/* size of the chunk to copy to userspace */ | 
 | 		size_t copy_size = min_t(size_t, count, read_size - offset); | 
 |  | 
 | 		/* request the block */ | 
 | 		req = cpu_to_le32(pos / block_size); | 
 | 		err = scarlett2_usb(mixer, SCARLETT2_USB_GET_DEVMAP, | 
 | 				    &req, sizeof(req), resp_buf, read_size); | 
 | 		if (err < 0) { | 
 | 			kfree(resp_buf); | 
 | 			return copied ? copied : err; | 
 | 		} | 
 |  | 
 | 		if (copy_to_user(buf, resp_buf + offset, copy_size)) { | 
 | 			kfree(resp_buf); | 
 | 			return -EFAULT; | 
 | 		} | 
 |  | 
 | 		buf += copy_size; | 
 | 		pos += copy_size; | 
 | 		copied += copy_size; | 
 | 		count -= copy_size; | 
 | 	} | 
 |  | 
 | 	kfree(resp_buf); | 
 | 	return copied; | 
 | } | 
 |  | 
 | static const struct snd_info_entry_ops scarlett2_devmap_ops = { | 
 | 	.read = scarlett2_devmap_read, | 
 | }; | 
 |  | 
 | static int scarlett2_devmap_init(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct snd_card *card = mixer->chip->card; | 
 | 	struct scarlett2_data *private = mixer->private_data; | 
 | 	const struct scarlett2_device_info *info = private->info; | 
 | 	__le16 config_len_buf[2]; | 
 | 	int config_len; | 
 | 	struct snd_info_entry *entry; | 
 | 	int err; | 
 |  | 
 | 	/* If the device doesn't support the DEVMAP commands, don't | 
 | 	 * create the /proc/asound/cardX/scarlett.json.zlib entry | 
 | 	 */ | 
 | 	if (!info->has_devmap) | 
 | 		return 0; | 
 |  | 
 | 	err = scarlett2_usb(mixer, SCARLETT2_USB_INFO_DEVMAP, | 
 | 			    NULL, 0, &config_len_buf, sizeof(config_len_buf)); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	config_len = le16_to_cpu(config_len_buf[1]); | 
 |  | 
 | 	err = snd_card_proc_new(card, SCARLETT2_DEVMAP_FILENAME, &entry); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	entry->content = SNDRV_INFO_CONTENT_DATA; | 
 | 	entry->private_data = mixer; | 
 | 	entry->c.ops = &scarlett2_devmap_ops; | 
 | 	entry->size = config_len; | 
 | 	entry->mode = S_IFREG | 0444; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | int snd_scarlett2_init(struct usb_mixer_interface *mixer) | 
 | { | 
 | 	struct snd_usb_audio *chip = mixer->chip; | 
 | 	const struct scarlett2_device_entry *entry; | 
 | 	int err; | 
 |  | 
 | 	/* only use UAC_VERSION_2 */ | 
 | 	if (!mixer->protocol) | 
 | 		return 0; | 
 |  | 
 | 	/* check if the user wants to use the FCP driver instead */ | 
 | 	if (chip->setup & SCARLETT2_USE_FCP_DRIVER) | 
 | 		return snd_fcp_init(mixer); | 
 |  | 
 | 	/* find entry in scarlett2_devices */ | 
 | 	entry = get_scarlett2_device_entry(mixer); | 
 | 	if (!entry) { | 
 | 		usb_audio_err(mixer->chip, | 
 | 			      "%s: missing device entry for %04x:%04x\n", | 
 | 			      __func__, | 
 | 			      USB_ID_VENDOR(chip->usb_id), | 
 | 			      USB_ID_PRODUCT(chip->usb_id)); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	if (chip->setup & SCARLETT2_DISABLE) { | 
 | 		usb_audio_info(chip, | 
 | 			"Focusrite %s Mixer Driver disabled " | 
 | 			"by modprobe options (snd_usb_audio " | 
 | 			"vid=0x%04x pid=0x%04x device_setup=%d)\n", | 
 | 			entry->series_name, | 
 | 			USB_ID_VENDOR(chip->usb_id), | 
 | 			USB_ID_PRODUCT(chip->usb_id), | 
 | 			SCARLETT2_DISABLE); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	usb_audio_info(chip, | 
 | 		"Focusrite %s Mixer Driver enabled (pid=0x%04x); " | 
 | 		"report any issues to " | 
 | 		"https://github.com/geoffreybennett/scarlett-gen2/issues", | 
 | 		entry->series_name, | 
 | 		USB_ID_PRODUCT(chip->usb_id)); | 
 |  | 
 | 	err = snd_scarlett2_controls_create(mixer, entry); | 
 | 	if (err < 0) { | 
 | 		usb_audio_err(mixer->chip, | 
 | 			      "Error initialising %s Mixer Driver: %d", | 
 | 			      entry->series_name, | 
 | 			      err); | 
 | 		return err; | 
 | 	} | 
 |  | 
 | 	err = scarlett2_hwdep_init(mixer); | 
 | 	if (err < 0) { | 
 | 		usb_audio_err(mixer->chip, | 
 | 			      "Error creating %s hwdep device: %d", | 
 | 			      entry->series_name, | 
 | 			      err); | 
 | 		return err; | 
 | 	} | 
 |  | 
 | 	err = scarlett2_devmap_init(mixer); | 
 | 	if (err < 0) | 
 | 		usb_audio_err(mixer->chip, | 
 | 			      "Error creating %s devmap entry: %d", | 
 | 			      entry->series_name, | 
 | 			      err); | 
 |  | 
 | 	return err; | 
 | } |