|  | // SPDX-License-Identifier: GPL-2.0+ | 
|  | /* Copyright (C) 2009 - 2019 Broadcom */ | 
|  |  | 
|  | #include <linux/bitfield.h> | 
|  | #include <linux/bitops.h> | 
|  | #include <linux/clk.h> | 
|  | #include <linux/compiler.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/io.h> | 
|  | #include <linux/iopoll.h> | 
|  | #include <linux/ioport.h> | 
|  | #include <linux/irqchip/chained_irq.h> | 
|  | #include <linux/irqchip/irq-msi-lib.h> | 
|  | #include <linux/irqdomain.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/list.h> | 
|  | #include <linux/log2.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/msi.h> | 
|  | #include <linux/of_address.h> | 
|  | #include <linux/of_irq.h> | 
|  | #include <linux/of_pci.h> | 
|  | #include <linux/of_platform.h> | 
|  | #include <linux/pci.h> | 
|  | #include <linux/pci-ecam.h> | 
|  | #include <linux/printk.h> | 
|  | #include <linux/regulator/consumer.h> | 
|  | #include <linux/reset.h> | 
|  | #include <linux/sizes.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/string.h> | 
|  | #include <linux/types.h> | 
|  |  | 
|  | #include "../pci.h" | 
|  |  | 
|  | /* BRCM_PCIE_CAP_REGS - Offset for the mandatory capability config regs */ | 
|  | #define BRCM_PCIE_CAP_REGS				0x00ac | 
|  |  | 
|  | /* Broadcom STB PCIe Register Offsets */ | 
|  | #define PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1				0x0188 | 
|  | #define  PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1_ENDIAN_MODE_BAR2_MASK	0xc | 
|  | #define  PCIE_RC_CFG_VENDOR_SPECIFIC_REG1_LITTLE_ENDIAN			0x0 | 
|  |  | 
|  | #define PCIE_RC_CFG_PRIV1_ID_VAL3			0x043c | 
|  | #define  PCIE_RC_CFG_PRIV1_ID_VAL3_CLASS_CODE_MASK	0xffffff | 
|  |  | 
|  | #define PCIE_RC_CFG_PRIV1_LINK_CAPABILITY			0x04dc | 
|  | #define  PCIE_RC_CFG_PRIV1_LINK_CAPABILITY_MAX_LINK_WIDTH_MASK	0x1f0 | 
|  | #define  PCIE_RC_CFG_PRIV1_LINK_CAPABILITY_ASPM_SUPPORT_MASK	0xc00 | 
|  |  | 
|  | #define PCIE_RC_CFG_PRIV1_ROOT_CAP			0x4f8 | 
|  | #define  PCIE_RC_CFG_PRIV1_ROOT_CAP_L1SS_MODE_MASK	0xf8 | 
|  |  | 
|  | #define PCIE_RC_DL_MDIO_ADDR				0x1100 | 
|  | #define PCIE_RC_DL_MDIO_WR_DATA				0x1104 | 
|  | #define PCIE_RC_DL_MDIO_RD_DATA				0x1108 | 
|  |  | 
|  | #define PCIE_RC_PL_REG_PHY_CTL_1			0x1804 | 
|  | #define  PCIE_RC_PL_REG_PHY_CTL_1_REG_P2_POWERDOWN_ENA_NOSYNC_MASK	0x8 | 
|  |  | 
|  | #define PCIE_RC_PL_PHY_CTL_15				0x184c | 
|  | #define  PCIE_RC_PL_PHY_CTL_15_DIS_PLL_PD_MASK		0x400000 | 
|  | #define  PCIE_RC_PL_PHY_CTL_15_PM_CLK_PERIOD_MASK	0xff | 
|  |  | 
|  | #define PCIE_MISC_MISC_CTRL				0x4008 | 
|  | #define  PCIE_MISC_MISC_CTRL_PCIE_RCB_64B_MODE_MASK	0x80 | 
|  | #define  PCIE_MISC_MISC_CTRL_PCIE_RCB_MPS_MODE_MASK	0x400 | 
|  | #define  PCIE_MISC_MISC_CTRL_SCB_ACCESS_EN_MASK		0x1000 | 
|  | #define  PCIE_MISC_MISC_CTRL_CFG_READ_UR_MODE_MASK	0x2000 | 
|  | #define  PCIE_MISC_MISC_CTRL_MAX_BURST_SIZE_MASK	0x300000 | 
|  |  | 
|  | #define  PCIE_MISC_MISC_CTRL_SCB0_SIZE_MASK		0xf8000000 | 
|  | #define  PCIE_MISC_MISC_CTRL_SCB1_SIZE_MASK		0x07c00000 | 
|  | #define  PCIE_MISC_MISC_CTRL_SCB2_SIZE_MASK		0x0000001f | 
|  | #define  SCB_SIZE_MASK(x) PCIE_MISC_MISC_CTRL_SCB ## x ## _SIZE_MASK | 
|  |  | 
|  | #define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LO		0x400c | 
|  | #define PCIE_MEM_WIN0_LO(win)	\ | 
|  | PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LO + ((win) * 8) | 
|  |  | 
|  | #define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_HI		0x4010 | 
|  | #define PCIE_MEM_WIN0_HI(win)	\ | 
|  | PCIE_MISC_CPU_2_PCIE_MEM_WIN0_HI + ((win) * 8) | 
|  |  | 
|  | /* | 
|  | * NOTE: You may see the term "BAR" in a number of register names used by | 
|  | *   this driver.  The term is an artifact of when the HW core was an | 
|  | *   endpoint device (EP).  Now it is a root complex (RC) and anywhere a | 
|  | *   register has the term "BAR" it is related to an inbound window. | 
|  | */ | 
|  |  | 
|  | #define PCIE_BRCM_MAX_INBOUND_WINS			16 | 
|  | #define PCIE_MISC_RC_BAR1_CONFIG_LO			0x402c | 
|  | #define  PCIE_MISC_RC_BAR1_CONFIG_LO_SIZE_MASK		0x1f | 
|  |  | 
|  | #define PCIE_MISC_RC_BAR4_CONFIG_LO			0x40d4 | 
|  |  | 
|  |  | 
|  | #define PCIE_MISC_MSI_BAR_CONFIG_LO			0x4044 | 
|  | #define PCIE_MISC_MSI_BAR_CONFIG_HI			0x4048 | 
|  |  | 
|  | #define PCIE_MISC_MSI_DATA_CONFIG			0x404c | 
|  | #define  PCIE_MISC_MSI_DATA_CONFIG_VAL_32		0xffe06540 | 
|  | #define  PCIE_MISC_MSI_DATA_CONFIG_VAL_8		0xfff86540 | 
|  |  | 
|  | #define PCIE_MISC_PCIE_CTRL				0x4064 | 
|  | #define  PCIE_MISC_PCIE_CTRL_PCIE_L23_REQUEST_MASK	0x1 | 
|  | #define PCIE_MISC_PCIE_CTRL_PCIE_PERSTB_MASK		0x4 | 
|  |  | 
|  | #define PCIE_MISC_PCIE_STATUS				0x4068 | 
|  | #define  PCIE_MISC_PCIE_STATUS_PCIE_PORT_MASK		0x80 | 
|  | #define  PCIE_MISC_PCIE_STATUS_PCIE_DL_ACTIVE_MASK	0x20 | 
|  | #define  PCIE_MISC_PCIE_STATUS_PCIE_PHYLINKUP_MASK	0x10 | 
|  | #define  PCIE_MISC_PCIE_STATUS_PCIE_LINK_IN_L23_MASK	0x40 | 
|  |  | 
|  | #define PCIE_MISC_REVISION				0x406c | 
|  | #define  BRCM_PCIE_HW_REV_33				0x0303 | 
|  | #define  BRCM_PCIE_HW_REV_3_20				0x0320 | 
|  |  | 
|  | #define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT		0x4070 | 
|  | #define  PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_LIMIT_MASK	0xfff00000 | 
|  | #define  PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_BASE_MASK	0xfff0 | 
|  | #define PCIE_MEM_WIN0_BASE_LIMIT(win)	\ | 
|  | PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT + ((win) * 4) | 
|  |  | 
|  | #define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_HI			0x4080 | 
|  | #define  PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_HI_BASE_MASK	0xff | 
|  | #define PCIE_MEM_WIN0_BASE_HI(win)	\ | 
|  | PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_HI + ((win) * 8) | 
|  |  | 
|  | #define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI			0x4084 | 
|  | #define  PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI_LIMIT_MASK	0xff | 
|  | #define PCIE_MEM_WIN0_LIMIT_HI(win)	\ | 
|  | PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI + ((win) * 8) | 
|  |  | 
|  | #define  PCIE_MISC_HARD_PCIE_HARD_DEBUG_CLKREQ_DEBUG_ENABLE_MASK	0x2 | 
|  | #define  PCIE_MISC_HARD_PCIE_HARD_DEBUG_L1SS_ENABLE_MASK		0x200000 | 
|  | #define  PCIE_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK		0x08000000 | 
|  | #define  PCIE_BMIPS_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK		0x00800000 | 
|  | #define  PCIE_CLKREQ_MASK \ | 
|  | (PCIE_MISC_HARD_PCIE_HARD_DEBUG_CLKREQ_DEBUG_ENABLE_MASK | \ | 
|  | PCIE_MISC_HARD_PCIE_HARD_DEBUG_L1SS_ENABLE_MASK) | 
|  |  | 
|  | #define PCIE_MISC_UBUS_BAR1_CONFIG_REMAP			0x40ac | 
|  | #define  PCIE_MISC_UBUS_BAR1_CONFIG_REMAP_ACCESS_EN_MASK	BIT(0) | 
|  | #define PCIE_MISC_UBUS_BAR4_CONFIG_REMAP			0x410c | 
|  |  | 
|  | #define PCIE_MSI_INTR2_BASE		0x4500 | 
|  |  | 
|  | /* Offsets from INTR2_CPU and MSI_INTR2 BASE offsets */ | 
|  | #define  MSI_INT_STATUS			0x0 | 
|  | #define  MSI_INT_CLR			0x8 | 
|  | #define  MSI_INT_MASK_SET		0x10 | 
|  | #define  MSI_INT_MASK_CLR		0x14 | 
|  |  | 
|  | #define  PCIE_RGR1_SW_INIT_1_PERST_MASK			0x1 | 
|  | #define  PCIE_RGR1_SW_INIT_1_PERST_SHIFT		0x0 | 
|  |  | 
|  | #define RGR1_SW_INIT_1_INIT_GENERIC_MASK		0x2 | 
|  | #define RGR1_SW_INIT_1_INIT_GENERIC_SHIFT		0x1 | 
|  | #define RGR1_SW_INIT_1_INIT_7278_MASK			0x1 | 
|  | #define RGR1_SW_INIT_1_INIT_7278_SHIFT			0x0 | 
|  |  | 
|  | /* PCIe parameters */ | 
|  | #define BRCM_NUM_PCIE_OUT_WINS		0x4 | 
|  | #define BRCM_INT_PCI_MSI_NR		32 | 
|  | #define BRCM_INT_PCI_MSI_LEGACY_NR	8 | 
|  | #define BRCM_INT_PCI_MSI_SHIFT		0 | 
|  | #define BRCM_INT_PCI_MSI_MASK		GENMASK(BRCM_INT_PCI_MSI_NR - 1, 0) | 
|  | #define BRCM_INT_PCI_MSI_LEGACY_MASK	GENMASK(31, \ | 
|  | 32 - BRCM_INT_PCI_MSI_LEGACY_NR) | 
|  |  | 
|  | /* MSI target addresses */ | 
|  | #define BRCM_MSI_TARGET_ADDR_LT_4GB	0x0fffffffcULL | 
|  | #define BRCM_MSI_TARGET_ADDR_GT_4GB	0xffffffffcULL | 
|  |  | 
|  | /* MDIO registers */ | 
|  | #define MDIO_PORT0			0x0 | 
|  | #define MDIO_DATA_MASK			0x7fffffff | 
|  | #define MDIO_PORT_MASK			0xf0000 | 
|  | #define MDIO_PORT_EXT_MASK		0x200000 | 
|  | #define MDIO_REGAD_MASK			0xffff | 
|  | #define MDIO_CMD_MASK			0x00100000 | 
|  | #define MDIO_CMD_READ			0x1 | 
|  | #define MDIO_CMD_WRITE			0x0 | 
|  | #define MDIO_DATA_DONE_MASK		0x80000000 | 
|  | #define MDIO_RD_DONE(x)			(((x) & MDIO_DATA_DONE_MASK) ? 1 : 0) | 
|  | #define MDIO_WT_DONE(x)			(((x) & MDIO_DATA_DONE_MASK) ? 0 : 1) | 
|  | #define SSC_REGS_ADDR			0x1100 | 
|  | #define SET_ADDR_OFFSET			0x1f | 
|  | #define SSC_CNTL_OFFSET			0x2 | 
|  | #define SSC_CNTL_OVRD_EN_MASK		0x8000 | 
|  | #define SSC_CNTL_OVRD_VAL_MASK		0x4000 | 
|  | #define SSC_STATUS_OFFSET		0x1 | 
|  | #define SSC_STATUS_SSC_MASK		0x400 | 
|  | #define SSC_STATUS_PLL_LOCK_MASK	0x800 | 
|  | #define PCIE_BRCM_MAX_MEMC		3 | 
|  |  | 
|  | #define IDX_ADDR(pcie)			((pcie)->cfg->offsets[EXT_CFG_INDEX]) | 
|  | #define DATA_ADDR(pcie)			((pcie)->cfg->offsets[EXT_CFG_DATA]) | 
|  | #define PCIE_RGR1_SW_INIT_1(pcie)	((pcie)->cfg->offsets[RGR1_SW_INIT_1]) | 
|  | #define HARD_DEBUG(pcie)		((pcie)->cfg->offsets[PCIE_HARD_DEBUG]) | 
|  | #define INTR2_CPU_BASE(pcie)		((pcie)->cfg->offsets[PCIE_INTR2_CPU_BASE]) | 
|  |  | 
|  | /* Rescal registers */ | 
|  | #define PCIE_DVT_PMU_PCIE_PHY_CTRL				0xc700 | 
|  | #define  PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_NFLDS			0x3 | 
|  | #define  PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_DIG_RESET_MASK		0x4 | 
|  | #define  PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_DIG_RESET_SHIFT	0x2 | 
|  | #define  PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_RESET_MASK		0x2 | 
|  | #define  PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_RESET_SHIFT		0x1 | 
|  | #define  PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_PWRDN_MASK		0x1 | 
|  | #define  PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_PWRDN_SHIFT		0x0 | 
|  |  | 
|  | /* Forward declarations */ | 
|  | struct brcm_pcie; | 
|  |  | 
|  | enum { | 
|  | RGR1_SW_INIT_1, | 
|  | EXT_CFG_INDEX, | 
|  | EXT_CFG_DATA, | 
|  | PCIE_HARD_DEBUG, | 
|  | PCIE_INTR2_CPU_BASE, | 
|  | }; | 
|  |  | 
|  | enum pcie_soc_base { | 
|  | GENERIC, | 
|  | BCM2711, | 
|  | BCM4908, | 
|  | BCM7278, | 
|  | BCM7425, | 
|  | BCM7435, | 
|  | BCM7712, | 
|  | }; | 
|  |  | 
|  | struct inbound_win { | 
|  | u64 size; | 
|  | u64 pci_offset; | 
|  | u64 cpu_addr; | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * The RESCAL block is tied to PCIe controller #1, regardless of the number of | 
|  | * controllers, and turning off PCIe controller #1 prevents access to the RESCAL | 
|  | * register blocks, therefore no other controller can access this register | 
|  | * space, and depending upon the bus fabric we may get a timeout (UBUS/GISB), | 
|  | * or a hang (AXI). | 
|  | */ | 
|  | #define CFG_QUIRK_AVOID_BRIDGE_SHUTDOWN		BIT(0) | 
|  |  | 
|  | struct pcie_cfg_data { | 
|  | const int *offsets; | 
|  | const enum pcie_soc_base soc_base; | 
|  | const bool has_phy; | 
|  | const u32 quirks; | 
|  | u8 num_inbound_wins; | 
|  | int (*perst_set)(struct brcm_pcie *pcie, u32 val); | 
|  | int (*bridge_sw_init_set)(struct brcm_pcie *pcie, u32 val); | 
|  | int (*post_setup)(struct brcm_pcie *pcie); | 
|  | }; | 
|  |  | 
|  | struct subdev_regulators { | 
|  | unsigned int num_supplies; | 
|  | struct regulator_bulk_data supplies[]; | 
|  | }; | 
|  |  | 
|  | struct brcm_msi { | 
|  | struct device		*dev; | 
|  | void __iomem		*base; | 
|  | struct device_node	*np; | 
|  | struct irq_domain	*inner_domain; | 
|  | struct mutex		lock; /* guards the alloc/free operations */ | 
|  | u64			target_addr; | 
|  | int			irq; | 
|  | DECLARE_BITMAP(used, BRCM_INT_PCI_MSI_NR); | 
|  | bool			legacy; | 
|  | /* Some chips have MSIs in bits [31..24] of a shared register. */ | 
|  | int			legacy_shift; | 
|  | int			nr; /* No. of MSI available, depends on chip */ | 
|  | /* This is the base pointer for interrupt status/set/clr regs */ | 
|  | void __iomem		*intr_base; | 
|  | }; | 
|  |  | 
|  | /* Internal PCIe Host Controller Information.*/ | 
|  | struct brcm_pcie { | 
|  | struct device		*dev; | 
|  | void __iomem		*base; | 
|  | struct clk		*clk; | 
|  | struct device_node	*np; | 
|  | bool			ssc; | 
|  | int			gen; | 
|  | u64			msi_target_addr; | 
|  | struct brcm_msi		*msi; | 
|  | struct reset_control	*rescal; | 
|  | struct reset_control	*perst_reset; | 
|  | struct reset_control	*bridge_reset; | 
|  | struct reset_control	*swinit_reset; | 
|  | int			num_memc; | 
|  | u64			memc_size[PCIE_BRCM_MAX_MEMC]; | 
|  | u32			hw_rev; | 
|  | struct subdev_regulators *sr; | 
|  | bool			ep_wakeup_capable; | 
|  | const struct pcie_cfg_data	*cfg; | 
|  | }; | 
|  |  | 
|  | static inline bool is_bmips(const struct brcm_pcie *pcie) | 
|  | { | 
|  | return pcie->cfg->soc_base == BCM7435 || pcie->cfg->soc_base == BCM7425; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This is to convert the size of the inbound "BAR" region to the | 
|  | * non-linear values of PCIE_X_MISC_RC_BAR[123]_CONFIG_LO.SIZE | 
|  | */ | 
|  | static int brcm_pcie_encode_ibar_size(u64 size) | 
|  | { | 
|  | int log2_in = ilog2(size); | 
|  |  | 
|  | if (log2_in >= 12 && log2_in <= 15) | 
|  | /* Covers 4KB to 32KB (inclusive) */ | 
|  | return (log2_in - 12) + 0x1c; | 
|  | else if (log2_in >= 16 && log2_in <= 36) | 
|  | /* Covers 64KB to 64GB, (inclusive) */ | 
|  | return log2_in - 15; | 
|  | /* Something is awry so disable */ | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static u32 brcm_pcie_mdio_form_pkt(int port, int regad, int cmd) | 
|  | { | 
|  | u32 pkt = 0; | 
|  |  | 
|  | pkt |= FIELD_PREP(MDIO_PORT_EXT_MASK, port >> 4); | 
|  | pkt |= FIELD_PREP(MDIO_PORT_MASK, port); | 
|  | pkt |= FIELD_PREP(MDIO_REGAD_MASK, regad); | 
|  | pkt |= FIELD_PREP(MDIO_CMD_MASK, cmd); | 
|  |  | 
|  | return pkt; | 
|  | } | 
|  |  | 
|  | /* negative return value indicates error */ | 
|  | static int brcm_pcie_mdio_read(void __iomem *base, u8 port, u8 regad, u32 *val) | 
|  | { | 
|  | u32 data; | 
|  | int err; | 
|  |  | 
|  | writel(brcm_pcie_mdio_form_pkt(port, regad, MDIO_CMD_READ), | 
|  | base + PCIE_RC_DL_MDIO_ADDR); | 
|  | readl(base + PCIE_RC_DL_MDIO_ADDR); | 
|  | err = readl_poll_timeout_atomic(base + PCIE_RC_DL_MDIO_RD_DATA, data, | 
|  | MDIO_RD_DONE(data), 10, 100); | 
|  | *val = FIELD_GET(MDIO_DATA_MASK, data); | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | /* negative return value indicates error */ | 
|  | static int brcm_pcie_mdio_write(void __iomem *base, u8 port, | 
|  | u8 regad, u16 wrdata) | 
|  | { | 
|  | u32 data; | 
|  | int err; | 
|  |  | 
|  | writel(brcm_pcie_mdio_form_pkt(port, regad, MDIO_CMD_WRITE), | 
|  | base + PCIE_RC_DL_MDIO_ADDR); | 
|  | readl(base + PCIE_RC_DL_MDIO_ADDR); | 
|  | writel(MDIO_DATA_DONE_MASK | wrdata, base + PCIE_RC_DL_MDIO_WR_DATA); | 
|  |  | 
|  | err = readl_poll_timeout_atomic(base + PCIE_RC_DL_MDIO_WR_DATA, data, | 
|  | MDIO_WT_DONE(data), 10, 100); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Configures device for Spread Spectrum Clocking (SSC) mode; a negative | 
|  | * return value indicates error. | 
|  | */ | 
|  | static int brcm_pcie_set_ssc(struct brcm_pcie *pcie) | 
|  | { | 
|  | int pll, ssc; | 
|  | int ret; | 
|  | u32 tmp; | 
|  |  | 
|  | ret = brcm_pcie_mdio_write(pcie->base, MDIO_PORT0, SET_ADDR_OFFSET, | 
|  | SSC_REGS_ADDR); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | ret = brcm_pcie_mdio_read(pcie->base, MDIO_PORT0, | 
|  | SSC_CNTL_OFFSET, &tmp); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | u32p_replace_bits(&tmp, 1, SSC_CNTL_OVRD_EN_MASK); | 
|  | u32p_replace_bits(&tmp, 1, SSC_CNTL_OVRD_VAL_MASK); | 
|  | ret = brcm_pcie_mdio_write(pcie->base, MDIO_PORT0, | 
|  | SSC_CNTL_OFFSET, tmp); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | usleep_range(1000, 2000); | 
|  | ret = brcm_pcie_mdio_read(pcie->base, MDIO_PORT0, | 
|  | SSC_STATUS_OFFSET, &tmp); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | ssc = FIELD_GET(SSC_STATUS_SSC_MASK, tmp); | 
|  | pll = FIELD_GET(SSC_STATUS_PLL_LOCK_MASK, tmp); | 
|  |  | 
|  | return ssc && pll ? 0 : -EIO; | 
|  | } | 
|  |  | 
|  | /* Limits operation to a specific generation (1, 2, or 3) */ | 
|  | static void brcm_pcie_set_gen(struct brcm_pcie *pcie, int gen) | 
|  | { | 
|  | u16 lnkctl2 = readw(pcie->base + BRCM_PCIE_CAP_REGS + PCI_EXP_LNKCTL2); | 
|  | u32 lnkcap = readl(pcie->base + PCIE_RC_CFG_PRIV1_LINK_CAPABILITY); | 
|  |  | 
|  | u32p_replace_bits(&lnkcap, gen, PCI_EXP_LNKCAP_SLS); | 
|  | writel(lnkcap, pcie->base + PCIE_RC_CFG_PRIV1_LINK_CAPABILITY); | 
|  |  | 
|  | u16p_replace_bits(&lnkctl2, gen, PCI_EXP_LNKCTL2_TLS); | 
|  | writew(lnkctl2, pcie->base + BRCM_PCIE_CAP_REGS + PCI_EXP_LNKCTL2); | 
|  | } | 
|  |  | 
|  | static void brcm_pcie_set_outbound_win(struct brcm_pcie *pcie, | 
|  | u8 win, u64 cpu_addr, | 
|  | u64 pcie_addr, u64 size) | 
|  | { | 
|  | u32 cpu_addr_mb_high, limit_addr_mb_high; | 
|  | phys_addr_t cpu_addr_mb, limit_addr_mb; | 
|  | int high_addr_shift; | 
|  | u32 tmp; | 
|  |  | 
|  | /* Set the base of the pcie_addr window */ | 
|  | writel(lower_32_bits(pcie_addr), pcie->base + PCIE_MEM_WIN0_LO(win)); | 
|  | writel(upper_32_bits(pcie_addr), pcie->base + PCIE_MEM_WIN0_HI(win)); | 
|  |  | 
|  | /* Write the addr base & limit lower bits (in MBs) */ | 
|  | cpu_addr_mb = cpu_addr / SZ_1M; | 
|  | limit_addr_mb = (cpu_addr + size - 1) / SZ_1M; | 
|  |  | 
|  | tmp = readl(pcie->base + PCIE_MEM_WIN0_BASE_LIMIT(win)); | 
|  | u32p_replace_bits(&tmp, cpu_addr_mb, | 
|  | PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_BASE_MASK); | 
|  | u32p_replace_bits(&tmp, limit_addr_mb, | 
|  | PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_LIMIT_MASK); | 
|  | writel(tmp, pcie->base + PCIE_MEM_WIN0_BASE_LIMIT(win)); | 
|  |  | 
|  | if (is_bmips(pcie)) | 
|  | return; | 
|  |  | 
|  | /* Write the cpu & limit addr upper bits */ | 
|  | high_addr_shift = | 
|  | HWEIGHT32(PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_BASE_MASK); | 
|  |  | 
|  | cpu_addr_mb_high = cpu_addr_mb >> high_addr_shift; | 
|  | tmp = readl(pcie->base + PCIE_MEM_WIN0_BASE_HI(win)); | 
|  | u32p_replace_bits(&tmp, cpu_addr_mb_high, | 
|  | PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_HI_BASE_MASK); | 
|  | writel(tmp, pcie->base + PCIE_MEM_WIN0_BASE_HI(win)); | 
|  |  | 
|  | limit_addr_mb_high = limit_addr_mb >> high_addr_shift; | 
|  | tmp = readl(pcie->base + PCIE_MEM_WIN0_LIMIT_HI(win)); | 
|  | u32p_replace_bits(&tmp, limit_addr_mb_high, | 
|  | PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI_LIMIT_MASK); | 
|  | writel(tmp, pcie->base + PCIE_MEM_WIN0_LIMIT_HI(win)); | 
|  | } | 
|  |  | 
|  | #define BRCM_MSI_FLAGS_REQUIRED (MSI_FLAG_USE_DEF_DOM_OPS	| \ | 
|  | MSI_FLAG_USE_DEF_CHIP_OPS	| \ | 
|  | MSI_FLAG_NO_AFFINITY) | 
|  |  | 
|  | #define BRCM_MSI_FLAGS_SUPPORTED (MSI_GENERIC_FLAGS_MASK	| \ | 
|  | MSI_FLAG_MULTI_PCI_MSI) | 
|  |  | 
|  | static const struct msi_parent_ops brcm_msi_parent_ops = { | 
|  | .required_flags		= BRCM_MSI_FLAGS_REQUIRED, | 
|  | .supported_flags	= BRCM_MSI_FLAGS_SUPPORTED, | 
|  | .bus_select_token	= DOMAIN_BUS_PCI_MSI, | 
|  | .chip_flags		= MSI_CHIP_FLAG_SET_ACK, | 
|  | .prefix			= "BRCM-", | 
|  | .init_dev_msi_info	= msi_lib_init_dev_msi_info, | 
|  | }; | 
|  |  | 
|  | static void brcm_pcie_msi_isr(struct irq_desc *desc) | 
|  | { | 
|  | struct irq_chip *chip = irq_desc_get_chip(desc); | 
|  | unsigned long status; | 
|  | struct brcm_msi *msi; | 
|  | struct device *dev; | 
|  | u32 bit; | 
|  |  | 
|  | chained_irq_enter(chip, desc); | 
|  | msi = irq_desc_get_handler_data(desc); | 
|  | dev = msi->dev; | 
|  |  | 
|  | status = readl(msi->intr_base + MSI_INT_STATUS); | 
|  | status >>= msi->legacy_shift; | 
|  |  | 
|  | for_each_set_bit(bit, &status, msi->nr) { | 
|  | int ret; | 
|  | ret = generic_handle_domain_irq(msi->inner_domain, bit); | 
|  | if (ret) | 
|  | dev_dbg(dev, "unexpected MSI\n"); | 
|  | } | 
|  |  | 
|  | chained_irq_exit(chip, desc); | 
|  | } | 
|  |  | 
|  | static void brcm_msi_compose_msi_msg(struct irq_data *data, struct msi_msg *msg) | 
|  | { | 
|  | struct brcm_msi *msi = irq_data_get_irq_chip_data(data); | 
|  |  | 
|  | msg->address_lo = lower_32_bits(msi->target_addr); | 
|  | msg->address_hi = upper_32_bits(msi->target_addr); | 
|  | msg->data = (0xffff & PCIE_MISC_MSI_DATA_CONFIG_VAL_32) | data->hwirq; | 
|  | } | 
|  |  | 
|  | static void brcm_msi_ack_irq(struct irq_data *data) | 
|  | { | 
|  | struct brcm_msi *msi = irq_data_get_irq_chip_data(data); | 
|  | const int shift_amt = data->hwirq + msi->legacy_shift; | 
|  |  | 
|  | writel(1 << shift_amt, msi->intr_base + MSI_INT_CLR); | 
|  | } | 
|  |  | 
|  |  | 
|  | static struct irq_chip brcm_msi_bottom_irq_chip = { | 
|  | .name			= "BRCM STB MSI", | 
|  | .irq_compose_msi_msg	= brcm_msi_compose_msi_msg, | 
|  | .irq_ack                = brcm_msi_ack_irq, | 
|  | }; | 
|  |  | 
|  | static int brcm_msi_alloc(struct brcm_msi *msi, unsigned int nr_irqs) | 
|  | { | 
|  | int hwirq; | 
|  |  | 
|  | mutex_lock(&msi->lock); | 
|  | hwirq = bitmap_find_free_region(msi->used, msi->nr, | 
|  | order_base_2(nr_irqs)); | 
|  | mutex_unlock(&msi->lock); | 
|  |  | 
|  | return hwirq; | 
|  | } | 
|  |  | 
|  | static void brcm_msi_free(struct brcm_msi *msi, unsigned long hwirq, | 
|  | unsigned int nr_irqs) | 
|  | { | 
|  | mutex_lock(&msi->lock); | 
|  | bitmap_release_region(msi->used, hwirq, order_base_2(nr_irqs)); | 
|  | mutex_unlock(&msi->lock); | 
|  | } | 
|  |  | 
|  | static int brcm_irq_domain_alloc(struct irq_domain *domain, unsigned int virq, | 
|  | unsigned int nr_irqs, void *args) | 
|  | { | 
|  | struct brcm_msi *msi = domain->host_data; | 
|  | int hwirq, i; | 
|  |  | 
|  | hwirq = brcm_msi_alloc(msi, nr_irqs); | 
|  |  | 
|  | if (hwirq < 0) | 
|  | return hwirq; | 
|  |  | 
|  | for (i = 0; i < nr_irqs; i++) | 
|  | irq_domain_set_info(domain, virq + i, (irq_hw_number_t)hwirq + i, | 
|  | &brcm_msi_bottom_irq_chip, domain->host_data, | 
|  | handle_edge_irq, NULL, NULL); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void brcm_irq_domain_free(struct irq_domain *domain, | 
|  | unsigned int virq, unsigned int nr_irqs) | 
|  | { | 
|  | struct irq_data *d = irq_domain_get_irq_data(domain, virq); | 
|  | struct brcm_msi *msi = irq_data_get_irq_chip_data(d); | 
|  |  | 
|  | brcm_msi_free(msi, d->hwirq, nr_irqs); | 
|  | } | 
|  |  | 
|  | static const struct irq_domain_ops msi_domain_ops = { | 
|  | .alloc	= brcm_irq_domain_alloc, | 
|  | .free	= brcm_irq_domain_free, | 
|  | }; | 
|  |  | 
|  | static int brcm_allocate_domains(struct brcm_msi *msi) | 
|  | { | 
|  | struct device *dev = msi->dev; | 
|  |  | 
|  | struct irq_domain_info info = { | 
|  | .fwnode		= of_fwnode_handle(msi->np), | 
|  | .ops		= &msi_domain_ops, | 
|  | .host_data	= msi, | 
|  | .size		= msi->nr, | 
|  | }; | 
|  |  | 
|  | msi->inner_domain = msi_create_parent_irq_domain(&info, &brcm_msi_parent_ops); | 
|  | if (!msi->inner_domain) { | 
|  | dev_err(dev, "failed to create MSI domain\n"); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void brcm_free_domains(struct brcm_msi *msi) | 
|  | { | 
|  | irq_domain_remove(msi->inner_domain); | 
|  | } | 
|  |  | 
|  | static void brcm_msi_remove(struct brcm_pcie *pcie) | 
|  | { | 
|  | struct brcm_msi *msi = pcie->msi; | 
|  |  | 
|  | if (!msi) | 
|  | return; | 
|  | irq_set_chained_handler_and_data(msi->irq, NULL, NULL); | 
|  | brcm_free_domains(msi); | 
|  | } | 
|  |  | 
|  | static void brcm_msi_set_regs(struct brcm_msi *msi) | 
|  | { | 
|  | u32 val = msi->legacy ? BRCM_INT_PCI_MSI_LEGACY_MASK : | 
|  | BRCM_INT_PCI_MSI_MASK; | 
|  |  | 
|  | writel(val, msi->intr_base + MSI_INT_MASK_CLR); | 
|  | writel(val, msi->intr_base + MSI_INT_CLR); | 
|  |  | 
|  | /* | 
|  | * The 0 bit of PCIE_MISC_MSI_BAR_CONFIG_LO is repurposed to MSI | 
|  | * enable, which we set to 1. | 
|  | */ | 
|  | writel(lower_32_bits(msi->target_addr) | 0x1, | 
|  | msi->base + PCIE_MISC_MSI_BAR_CONFIG_LO); | 
|  | writel(upper_32_bits(msi->target_addr), | 
|  | msi->base + PCIE_MISC_MSI_BAR_CONFIG_HI); | 
|  |  | 
|  | val = msi->legacy ? PCIE_MISC_MSI_DATA_CONFIG_VAL_8 : PCIE_MISC_MSI_DATA_CONFIG_VAL_32; | 
|  | writel(val, msi->base + PCIE_MISC_MSI_DATA_CONFIG); | 
|  | } | 
|  |  | 
|  | static int brcm_pcie_enable_msi(struct brcm_pcie *pcie) | 
|  | { | 
|  | struct brcm_msi *msi; | 
|  | int irq, ret; | 
|  | struct device *dev = pcie->dev; | 
|  |  | 
|  | irq = irq_of_parse_and_map(dev->of_node, 1); | 
|  | if (irq <= 0) { | 
|  | dev_err(dev, "cannot map MSI interrupt\n"); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | msi = devm_kzalloc(dev, sizeof(struct brcm_msi), GFP_KERNEL); | 
|  | if (!msi) | 
|  | return -ENOMEM; | 
|  |  | 
|  | mutex_init(&msi->lock); | 
|  | msi->dev = dev; | 
|  | msi->base = pcie->base; | 
|  | msi->np = pcie->np; | 
|  | msi->target_addr = pcie->msi_target_addr; | 
|  | msi->irq = irq; | 
|  | msi->legacy = pcie->hw_rev < BRCM_PCIE_HW_REV_33; | 
|  |  | 
|  | /* | 
|  | * Sanity check to make sure that the 'used' bitmap in struct brcm_msi | 
|  | * is large enough. | 
|  | */ | 
|  | BUILD_BUG_ON(BRCM_INT_PCI_MSI_LEGACY_NR > BRCM_INT_PCI_MSI_NR); | 
|  |  | 
|  | if (msi->legacy) { | 
|  | msi->intr_base = msi->base + INTR2_CPU_BASE(pcie); | 
|  | msi->nr = BRCM_INT_PCI_MSI_LEGACY_NR; | 
|  | msi->legacy_shift = 24; | 
|  | } else { | 
|  | msi->intr_base = msi->base + PCIE_MSI_INTR2_BASE; | 
|  | msi->nr = BRCM_INT_PCI_MSI_NR; | 
|  | msi->legacy_shift = 0; | 
|  | } | 
|  |  | 
|  | ret = brcm_allocate_domains(msi); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | irq_set_chained_handler_and_data(msi->irq, brcm_pcie_msi_isr, msi); | 
|  |  | 
|  | brcm_msi_set_regs(msi); | 
|  | pcie->msi = msi; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* The controller is capable of serving in both RC and EP roles */ | 
|  | static bool brcm_pcie_rc_mode(struct brcm_pcie *pcie) | 
|  | { | 
|  | void __iomem *base = pcie->base; | 
|  | u32 val = readl(base + PCIE_MISC_PCIE_STATUS); | 
|  |  | 
|  | return !!FIELD_GET(PCIE_MISC_PCIE_STATUS_PCIE_PORT_MASK, val); | 
|  | } | 
|  |  | 
|  | static bool brcm_pcie_link_up(struct brcm_pcie *pcie) | 
|  | { | 
|  | u32 val = readl(pcie->base + PCIE_MISC_PCIE_STATUS); | 
|  | u32 dla = FIELD_GET(PCIE_MISC_PCIE_STATUS_PCIE_DL_ACTIVE_MASK, val); | 
|  | u32 plu = FIELD_GET(PCIE_MISC_PCIE_STATUS_PCIE_PHYLINKUP_MASK, val); | 
|  |  | 
|  | return dla && plu; | 
|  | } | 
|  |  | 
|  | static void __iomem *brcm_pcie_map_bus(struct pci_bus *bus, | 
|  | unsigned int devfn, int where) | 
|  | { | 
|  | struct brcm_pcie *pcie = bus->sysdata; | 
|  | void __iomem *base = pcie->base; | 
|  | int idx; | 
|  |  | 
|  | /* Accesses to the RC go right to the RC registers if !devfn */ | 
|  | if (pci_is_root_bus(bus)) | 
|  | return devfn ? NULL : base + PCIE_ECAM_REG(where); | 
|  |  | 
|  | /* An access to our HW w/o link-up will cause a CPU Abort */ | 
|  | if (!brcm_pcie_link_up(pcie)) | 
|  | return NULL; | 
|  |  | 
|  | /* For devices, write to the config space index register */ | 
|  | idx = PCIE_ECAM_OFFSET(bus->number, devfn, 0); | 
|  | writel(idx, base + IDX_ADDR(pcie)); | 
|  | return base + DATA_ADDR(pcie) + PCIE_ECAM_REG(where); | 
|  | } | 
|  |  | 
|  | static void __iomem *brcm7425_pcie_map_bus(struct pci_bus *bus, | 
|  | unsigned int devfn, int where) | 
|  | { | 
|  | struct brcm_pcie *pcie = bus->sysdata; | 
|  | void __iomem *base = pcie->base; | 
|  | int idx; | 
|  |  | 
|  | /* Accesses to the RC go right to the RC registers if !devfn */ | 
|  | if (pci_is_root_bus(bus)) | 
|  | return devfn ? NULL : base + PCIE_ECAM_REG(where); | 
|  |  | 
|  | /* An access to our HW w/o link-up will cause a CPU Abort */ | 
|  | if (!brcm_pcie_link_up(pcie)) | 
|  | return NULL; | 
|  |  | 
|  | /* For devices, write to the config space index register */ | 
|  | idx = PCIE_ECAM_OFFSET(bus->number, devfn, where); | 
|  | writel(idx, base + IDX_ADDR(pcie)); | 
|  | return base + DATA_ADDR(pcie); | 
|  | } | 
|  |  | 
|  | static int brcm_pcie_bridge_sw_init_set_generic(struct brcm_pcie *pcie, u32 val) | 
|  | { | 
|  | u32 tmp, mask = RGR1_SW_INIT_1_INIT_GENERIC_MASK; | 
|  | u32 shift = RGR1_SW_INIT_1_INIT_GENERIC_SHIFT; | 
|  | int ret = 0; | 
|  |  | 
|  | if (pcie->bridge_reset) { | 
|  | if (val) | 
|  | ret = reset_control_assert(pcie->bridge_reset); | 
|  | else | 
|  | ret = reset_control_deassert(pcie->bridge_reset); | 
|  |  | 
|  | if (ret) | 
|  | dev_err(pcie->dev, "failed to %s 'bridge' reset, err=%d\n", | 
|  | val ? "assert" : "deassert", ret); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | tmp = readl(pcie->base + PCIE_RGR1_SW_INIT_1(pcie)); | 
|  | tmp = (tmp & ~mask) | ((val << shift) & mask); | 
|  | writel(tmp, pcie->base + PCIE_RGR1_SW_INIT_1(pcie)); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int brcm_pcie_bridge_sw_init_set_7278(struct brcm_pcie *pcie, u32 val) | 
|  | { | 
|  | u32 tmp, mask =  RGR1_SW_INIT_1_INIT_7278_MASK; | 
|  | u32 shift = RGR1_SW_INIT_1_INIT_7278_SHIFT; | 
|  |  | 
|  | tmp = readl(pcie->base + PCIE_RGR1_SW_INIT_1(pcie)); | 
|  | tmp = (tmp & ~mask) | ((val << shift) & mask); | 
|  | writel(tmp, pcie->base + PCIE_RGR1_SW_INIT_1(pcie)); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int brcm_pcie_perst_set_4908(struct brcm_pcie *pcie, u32 val) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | if (WARN_ONCE(!pcie->perst_reset, "missing PERST# reset controller\n")) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (val) | 
|  | ret = reset_control_assert(pcie->perst_reset); | 
|  | else | 
|  | ret = reset_control_deassert(pcie->perst_reset); | 
|  |  | 
|  | if (ret) | 
|  | dev_err(pcie->dev, "failed to %s 'perst' reset, err=%d\n", | 
|  | val ? "assert" : "deassert", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int brcm_pcie_perst_set_7278(struct brcm_pcie *pcie, u32 val) | 
|  | { | 
|  | u32 tmp; | 
|  |  | 
|  | /* Perst bit has moved and assert value is 0 */ | 
|  | tmp = readl(pcie->base + PCIE_MISC_PCIE_CTRL); | 
|  | u32p_replace_bits(&tmp, !val, PCIE_MISC_PCIE_CTRL_PCIE_PERSTB_MASK); | 
|  | writel(tmp, pcie->base +  PCIE_MISC_PCIE_CTRL); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int brcm_pcie_perst_set_generic(struct brcm_pcie *pcie, u32 val) | 
|  | { | 
|  | u32 tmp; | 
|  |  | 
|  | tmp = readl(pcie->base + PCIE_RGR1_SW_INIT_1(pcie)); | 
|  | u32p_replace_bits(&tmp, val, PCIE_RGR1_SW_INIT_1_PERST_MASK); | 
|  | writel(tmp, pcie->base + PCIE_RGR1_SW_INIT_1(pcie)); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int brcm_pcie_post_setup_bcm2712(struct brcm_pcie *pcie) | 
|  | { | 
|  | static const u16 data[] = { 0x50b9, 0xbda1, 0x0094, 0x97b4, 0x5030, | 
|  | 0x5030, 0x0007 }; | 
|  | static const u8 regs[] = { 0x16, 0x17, 0x18, 0x19, 0x1b, 0x1c, 0x1e }; | 
|  | int ret, i; | 
|  | u32 tmp; | 
|  |  | 
|  | /* Allow a 54MHz (xosc) refclk source */ | 
|  | ret = brcm_pcie_mdio_write(pcie->base, MDIO_PORT0, SET_ADDR_OFFSET, 0x1600); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(regs); i++) { | 
|  | ret = brcm_pcie_mdio_write(pcie->base, MDIO_PORT0, regs[i], data[i]); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | usleep_range(100, 200); | 
|  |  | 
|  | /* | 
|  | * Set L1SS sub-state timers to avoid lengthy state transitions, | 
|  | * PM clock period is 18.52ns (1/54MHz, round down). | 
|  | */ | 
|  | tmp = readl(pcie->base + PCIE_RC_PL_PHY_CTL_15); | 
|  | tmp &= ~PCIE_RC_PL_PHY_CTL_15_PM_CLK_PERIOD_MASK; | 
|  | tmp |= 0x12; | 
|  | writel(tmp, pcie->base + PCIE_RC_PL_PHY_CTL_15); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void add_inbound_win(struct inbound_win *b, u8 *count, u64 size, | 
|  | u64 cpu_addr, u64 pci_offset) | 
|  | { | 
|  | b->size = size; | 
|  | b->cpu_addr = cpu_addr; | 
|  | b->pci_offset = pci_offset; | 
|  | (*count)++; | 
|  | } | 
|  |  | 
|  | static int brcm_pcie_get_inbound_wins(struct brcm_pcie *pcie, | 
|  | struct inbound_win inbound_wins[]) | 
|  | { | 
|  | struct pci_host_bridge *bridge = pci_host_bridge_from_priv(pcie); | 
|  | u64 pci_offset, cpu_addr, size = 0, tot_size = 0; | 
|  | struct resource_entry *entry; | 
|  | struct device *dev = pcie->dev; | 
|  | u64 lowest_pcie_addr = ~(u64)0; | 
|  | int ret, i = 0; | 
|  | u8 n = 0; | 
|  |  | 
|  | /* | 
|  | * The HW registers (and PCIe) use order-1 numbering for BARs.  As such, | 
|  | * we have inbound_wins[0] unused and BAR1 starts at inbound_wins[1]. | 
|  | */ | 
|  | struct inbound_win *b_begin = &inbound_wins[1]; | 
|  | struct inbound_win *b = b_begin; | 
|  |  | 
|  | /* | 
|  | * STB chips beside 7712 disable the first inbound window default. | 
|  | * Rather being mapped to system memory it is mapped to the | 
|  | * internal registers of the SoC.  This feature is deprecated, has | 
|  | * security considerations, and is not implemented in our modern | 
|  | * SoCs. | 
|  | */ | 
|  | if (pcie->cfg->soc_base != BCM7712) | 
|  | add_inbound_win(b++, &n, 0, 0, 0); | 
|  |  | 
|  | resource_list_for_each_entry(entry, &bridge->dma_ranges) { | 
|  | u64 pcie_start = entry->res->start - entry->offset; | 
|  | u64 cpu_start = entry->res->start; | 
|  |  | 
|  | size = resource_size(entry->res); | 
|  | tot_size += size; | 
|  | if (pcie_start < lowest_pcie_addr) | 
|  | lowest_pcie_addr = pcie_start; | 
|  | /* | 
|  | * 7712 and newer chips may have many BARs, with each | 
|  | * offering a non-overlapping viewport to system memory. | 
|  | * That being said, each BARs size must still be a power of | 
|  | * two. | 
|  | */ | 
|  | if (pcie->cfg->soc_base == BCM7712) | 
|  | add_inbound_win(b++, &n, size, cpu_start, pcie_start); | 
|  |  | 
|  | if (n > pcie->cfg->num_inbound_wins) | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (lowest_pcie_addr == ~(u64)0) { | 
|  | dev_err(dev, "DT node has no dma-ranges\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * 7712 and newer chips do not have an internal memory mapping system | 
|  | * that enables multiple memory controllers.  As such, it can return | 
|  | * now w/o doing special configuration. | 
|  | */ | 
|  | if (pcie->cfg->soc_base == BCM7712) | 
|  | return n; | 
|  |  | 
|  | ret = of_property_read_variable_u64_array(pcie->np, "brcm,scb-sizes", pcie->memc_size, 1, | 
|  | PCIE_BRCM_MAX_MEMC); | 
|  | if (ret <= 0) { | 
|  | /* Make an educated guess */ | 
|  | pcie->num_memc = 1; | 
|  | pcie->memc_size[0] = 1ULL << fls64(tot_size - 1); | 
|  | } else { | 
|  | pcie->num_memc = ret; | 
|  | } | 
|  |  | 
|  | /* Each memc is viewed through a "port" that is a power of 2 */ | 
|  | for (i = 0, size = 0; i < pcie->num_memc; i++) | 
|  | size += pcie->memc_size[i]; | 
|  |  | 
|  | /* Our HW mandates that the window size must be a power of 2 */ | 
|  | size = 1ULL << fls64(size - 1); | 
|  |  | 
|  | /* | 
|  | * For STB chips, the BAR2 cpu_addr is hardwired to the start | 
|  | * of system memory, so we set it to 0. | 
|  | */ | 
|  | cpu_addr = 0; | 
|  | pci_offset = lowest_pcie_addr; | 
|  |  | 
|  | /* | 
|  | * We validate the inbound memory view even though we should trust | 
|  | * whatever the device-tree provides. This is because of an HW issue on | 
|  | * early Raspberry Pi 4's revisions (bcm2711). It turns out its | 
|  | * firmware has to dynamically edit dma-ranges due to a bug on the | 
|  | * PCIe controller integration, which prohibits any access above the | 
|  | * lower 3GB of memory. Given this, we decided to keep the dma-ranges | 
|  | * in check, avoiding hard to debug device-tree related issues in the | 
|  | * future: | 
|  | * | 
|  | * The PCIe host controller by design must set the inbound viewport to | 
|  | * be a contiguous arrangement of all of the system's memory.  In | 
|  | * addition, its size must be a power of two.  To further complicate | 
|  | * matters, the viewport must start on a pcie-address that is aligned | 
|  | * on a multiple of its size.  If a portion of the viewport does not | 
|  | * represent system memory -- e.g. 3GB of memory requires a 4GB | 
|  | * viewport -- we can map the outbound memory in or after 3GB and even | 
|  | * though the viewport will overlap the outbound memory the controller | 
|  | * will know to send outbound memory downstream and everything else | 
|  | * upstream. | 
|  | * | 
|  | * For example: | 
|  | * | 
|  | * - The best-case scenario, memory up to 3GB, is to place the inbound | 
|  | *   region in the first 4GB of pcie-space, as some legacy devices can | 
|  | *   only address 32bits. We would also like to put the MSI under 4GB | 
|  | *   as well, since some devices require a 32bit MSI target address. | 
|  | * | 
|  | * - If the system memory is 4GB or larger we cannot start the inbound | 
|  | *   region at location 0 (since we have to allow some space for | 
|  | *   outbound memory @ 3GB). So instead it will  start at the 1x | 
|  | *   multiple of its size | 
|  | */ | 
|  | if (!size || (pci_offset & (size - 1)) || | 
|  | (pci_offset < SZ_4G && pci_offset > SZ_2G)) { | 
|  | dev_err(dev, "Invalid inbound_win2_offset/size: size 0x%llx, off 0x%llx\n", | 
|  | size, pci_offset); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* Enable inbound window 2, the main inbound window for STB chips */ | 
|  | add_inbound_win(b++, &n, size, cpu_addr, pci_offset); | 
|  |  | 
|  | /* | 
|  | * Disable inbound window 3.  On some chips presents the same | 
|  | * window as #2 but the data appears in a settable endianness. | 
|  | */ | 
|  | add_inbound_win(b++, &n, 0, 0, 0); | 
|  |  | 
|  | return n; | 
|  | } | 
|  |  | 
|  | static u32 brcm_bar_reg_offset(int bar) | 
|  | { | 
|  | if (bar <= 3) | 
|  | return PCIE_MISC_RC_BAR1_CONFIG_LO + 8 * (bar - 1); | 
|  | else | 
|  | return PCIE_MISC_RC_BAR4_CONFIG_LO + 8 * (bar - 4); | 
|  | } | 
|  |  | 
|  | static u32 brcm_ubus_reg_offset(int bar) | 
|  | { | 
|  | if (bar <= 3) | 
|  | return PCIE_MISC_UBUS_BAR1_CONFIG_REMAP + 8 * (bar - 1); | 
|  | else | 
|  | return PCIE_MISC_UBUS_BAR4_CONFIG_REMAP + 8 * (bar - 4); | 
|  | } | 
|  |  | 
|  | static void set_inbound_win_registers(struct brcm_pcie *pcie, | 
|  | const struct inbound_win *inbound_wins, | 
|  | u8 num_inbound_wins) | 
|  | { | 
|  | void __iomem *base = pcie->base; | 
|  | int i; | 
|  |  | 
|  | for (i = 1; i <= num_inbound_wins; i++) { | 
|  | u64 pci_offset = inbound_wins[i].pci_offset; | 
|  | u64 cpu_addr = inbound_wins[i].cpu_addr; | 
|  | u64 size = inbound_wins[i].size; | 
|  | u32 reg_offset = brcm_bar_reg_offset(i); | 
|  | u32 tmp = lower_32_bits(pci_offset); | 
|  |  | 
|  | u32p_replace_bits(&tmp, brcm_pcie_encode_ibar_size(size), | 
|  | PCIE_MISC_RC_BAR1_CONFIG_LO_SIZE_MASK); | 
|  |  | 
|  | /* Write low */ | 
|  | writel_relaxed(tmp, base + reg_offset); | 
|  | /* Write high */ | 
|  | writel_relaxed(upper_32_bits(pci_offset), base + reg_offset + 4); | 
|  |  | 
|  | /* | 
|  | * Most STB chips: | 
|  | *     Do nothing. | 
|  | * 7712: | 
|  | *     All of their BARs need to be set. | 
|  | */ | 
|  | if (pcie->cfg->soc_base == BCM7712) { | 
|  | /* BUS remap register settings */ | 
|  | reg_offset = brcm_ubus_reg_offset(i); | 
|  | tmp = lower_32_bits(cpu_addr) & ~0xfff; | 
|  | tmp |= PCIE_MISC_UBUS_BAR1_CONFIG_REMAP_ACCESS_EN_MASK; | 
|  | writel_relaxed(tmp, base + reg_offset); | 
|  | tmp = upper_32_bits(cpu_addr); | 
|  | writel_relaxed(tmp, base + reg_offset + 4); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static int brcm_pcie_setup(struct brcm_pcie *pcie) | 
|  | { | 
|  | struct inbound_win inbound_wins[PCIE_BRCM_MAX_INBOUND_WINS]; | 
|  | void __iomem *base = pcie->base; | 
|  | struct pci_host_bridge *bridge; | 
|  | struct resource_entry *entry; | 
|  | u32 tmp, burst, aspm_support, num_lanes, num_lanes_cap; | 
|  | u8 num_out_wins = 0; | 
|  | int num_inbound_wins = 0; | 
|  | int memc, ret; | 
|  |  | 
|  | /* Reset the bridge */ | 
|  | ret = pcie->cfg->bridge_sw_init_set(pcie, 1); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | /* Ensure that PERST# is asserted; some bootloaders may deassert it. */ | 
|  | if (pcie->cfg->soc_base == BCM2711) { | 
|  | ret = pcie->cfg->perst_set(pcie, 1); | 
|  | if (ret) { | 
|  | pcie->cfg->bridge_sw_init_set(pcie, 0); | 
|  | return ret; | 
|  | } | 
|  | } | 
|  |  | 
|  | usleep_range(100, 200); | 
|  |  | 
|  | /* Take the bridge out of reset */ | 
|  | ret = pcie->cfg->bridge_sw_init_set(pcie, 0); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | tmp = readl(base + HARD_DEBUG(pcie)); | 
|  | if (is_bmips(pcie)) | 
|  | tmp &= ~PCIE_BMIPS_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK; | 
|  | else | 
|  | tmp &= ~PCIE_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK; | 
|  | writel(tmp, base + HARD_DEBUG(pcie)); | 
|  | /* Wait for SerDes to be stable */ | 
|  | usleep_range(100, 200); | 
|  |  | 
|  | /* | 
|  | * SCB_MAX_BURST_SIZE is a two bit field.  For GENERIC chips it | 
|  | * is encoded as 0=128, 1=256, 2=512, 3=Rsvd, for BCM7278 it | 
|  | * is encoded as 0=Rsvd, 1=128, 2=256, 3=512. | 
|  | */ | 
|  | if (is_bmips(pcie)) | 
|  | burst = 0x1; /* 256 bytes */ | 
|  | else if (pcie->cfg->soc_base == BCM2711) | 
|  | burst = 0x0; /* 128 bytes */ | 
|  | else if (pcie->cfg->soc_base == BCM7278) | 
|  | burst = 0x3; /* 512 bytes */ | 
|  | else | 
|  | burst = 0x2; /* 512 bytes */ | 
|  |  | 
|  | /* | 
|  | * Set SCB_MAX_BURST_SIZE, CFG_READ_UR_MODE, SCB_ACCESS_EN, | 
|  | * RCB_MPS_MODE, RCB_64B_MODE | 
|  | */ | 
|  | tmp = readl(base + PCIE_MISC_MISC_CTRL); | 
|  | u32p_replace_bits(&tmp, 1, PCIE_MISC_MISC_CTRL_SCB_ACCESS_EN_MASK); | 
|  | u32p_replace_bits(&tmp, 1, PCIE_MISC_MISC_CTRL_CFG_READ_UR_MODE_MASK); | 
|  | u32p_replace_bits(&tmp, burst, PCIE_MISC_MISC_CTRL_MAX_BURST_SIZE_MASK); | 
|  | u32p_replace_bits(&tmp, 1, PCIE_MISC_MISC_CTRL_PCIE_RCB_MPS_MODE_MASK); | 
|  | u32p_replace_bits(&tmp, 1, PCIE_MISC_MISC_CTRL_PCIE_RCB_64B_MODE_MASK); | 
|  | writel(tmp, base + PCIE_MISC_MISC_CTRL); | 
|  |  | 
|  | num_inbound_wins = brcm_pcie_get_inbound_wins(pcie, inbound_wins); | 
|  | if (num_inbound_wins < 0) | 
|  | return num_inbound_wins; | 
|  |  | 
|  | set_inbound_win_registers(pcie, inbound_wins, num_inbound_wins); | 
|  |  | 
|  | if (!brcm_pcie_rc_mode(pcie)) { | 
|  | dev_err(pcie->dev, "PCIe RC controller misconfigured as Endpoint\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | tmp = readl(base + PCIE_MISC_MISC_CTRL); | 
|  | for (memc = 0; memc < pcie->num_memc; memc++) { | 
|  | u32 scb_size_val = ilog2(pcie->memc_size[memc]) - 15; | 
|  |  | 
|  | if (memc == 0) | 
|  | u32p_replace_bits(&tmp, scb_size_val, SCB_SIZE_MASK(0)); | 
|  | else if (memc == 1) | 
|  | u32p_replace_bits(&tmp, scb_size_val, SCB_SIZE_MASK(1)); | 
|  | else if (memc == 2) | 
|  | u32p_replace_bits(&tmp, scb_size_val, SCB_SIZE_MASK(2)); | 
|  | } | 
|  | writel(tmp, base + PCIE_MISC_MISC_CTRL); | 
|  |  | 
|  | /* | 
|  | * We ideally want the MSI target address to be located in the 32bit | 
|  | * addressable memory area. Some devices might depend on it. This is | 
|  | * possible either when the inbound window is located above the lower | 
|  | * 4GB or when the inbound area is smaller than 4GB (taking into | 
|  | * account the rounding-up we're forced to perform). | 
|  | */ | 
|  | if (inbound_wins[2].pci_offset >= SZ_4G || | 
|  | (inbound_wins[2].size + inbound_wins[2].pci_offset) < SZ_4G) | 
|  | pcie->msi_target_addr = BRCM_MSI_TARGET_ADDR_LT_4GB; | 
|  | else | 
|  | pcie->msi_target_addr = BRCM_MSI_TARGET_ADDR_GT_4GB; | 
|  |  | 
|  |  | 
|  | /* Don't advertise L0s capability if 'aspm-no-l0s' */ | 
|  | aspm_support = PCIE_LINK_STATE_L1; | 
|  | if (!of_property_read_bool(pcie->np, "aspm-no-l0s")) | 
|  | aspm_support |= PCIE_LINK_STATE_L0S; | 
|  | tmp = readl(base + PCIE_RC_CFG_PRIV1_LINK_CAPABILITY); | 
|  | u32p_replace_bits(&tmp, aspm_support, | 
|  | PCIE_RC_CFG_PRIV1_LINK_CAPABILITY_ASPM_SUPPORT_MASK); | 
|  | writel(tmp, base + PCIE_RC_CFG_PRIV1_LINK_CAPABILITY); | 
|  |  | 
|  | /* 'tmp' still holds the contents of PRIV1_LINK_CAPABILITY */ | 
|  | num_lanes_cap = u32_get_bits(tmp, PCIE_RC_CFG_PRIV1_LINK_CAPABILITY_MAX_LINK_WIDTH_MASK); | 
|  | num_lanes = 0; | 
|  |  | 
|  | /* | 
|  | * Use hardware negotiated Max Link Width value by default.  If the | 
|  | * "num-lanes" DT property is present, assume that the chip's default | 
|  | * link width capability information is incorrect/undesired and use the | 
|  | * specified value instead. | 
|  | */ | 
|  | if (!of_property_read_u32(pcie->np, "num-lanes", &num_lanes) && | 
|  | num_lanes && num_lanes <= 4 && num_lanes_cap != num_lanes) { | 
|  | u32p_replace_bits(&tmp, num_lanes, | 
|  | PCIE_RC_CFG_PRIV1_LINK_CAPABILITY_MAX_LINK_WIDTH_MASK); | 
|  | writel(tmp, base + PCIE_RC_CFG_PRIV1_LINK_CAPABILITY); | 
|  | tmp = readl(base + PCIE_RC_PL_REG_PHY_CTL_1); | 
|  | u32p_replace_bits(&tmp, 1, | 
|  | PCIE_RC_PL_REG_PHY_CTL_1_REG_P2_POWERDOWN_ENA_NOSYNC_MASK); | 
|  | writel(tmp, base + PCIE_RC_PL_REG_PHY_CTL_1); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * For config space accesses on the RC, show the right class for | 
|  | * a PCIe-PCIe bridge (the default setting is to be EP mode). | 
|  | */ | 
|  | tmp = readl(base + PCIE_RC_CFG_PRIV1_ID_VAL3); | 
|  | u32p_replace_bits(&tmp, 0x060400, | 
|  | PCIE_RC_CFG_PRIV1_ID_VAL3_CLASS_CODE_MASK); | 
|  | writel(tmp, base + PCIE_RC_CFG_PRIV1_ID_VAL3); | 
|  |  | 
|  | bridge = pci_host_bridge_from_priv(pcie); | 
|  | resource_list_for_each_entry(entry, &bridge->windows) { | 
|  | struct resource *res = entry->res; | 
|  |  | 
|  | if (resource_type(res) != IORESOURCE_MEM) | 
|  | continue; | 
|  |  | 
|  | if (num_out_wins >= BRCM_NUM_PCIE_OUT_WINS) { | 
|  | dev_err(pcie->dev, "too many outbound wins\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (is_bmips(pcie)) { | 
|  | u64 start = res->start; | 
|  | unsigned int j, nwins = resource_size(res) / SZ_128M; | 
|  |  | 
|  | /* bmips PCIe outbound windows have a 128MB max size */ | 
|  | if (nwins > BRCM_NUM_PCIE_OUT_WINS) | 
|  | nwins = BRCM_NUM_PCIE_OUT_WINS; | 
|  | for (j = 0; j < nwins; j++, start += SZ_128M) | 
|  | brcm_pcie_set_outbound_win(pcie, j, start, | 
|  | start - entry->offset, | 
|  | SZ_128M); | 
|  | break; | 
|  | } | 
|  | brcm_pcie_set_outbound_win(pcie, num_out_wins, res->start, | 
|  | res->start - entry->offset, | 
|  | resource_size(res)); | 
|  | num_out_wins++; | 
|  | } | 
|  |  | 
|  | /* PCIe->SCB endian mode for inbound window */ | 
|  | tmp = readl(base + PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1); | 
|  | u32p_replace_bits(&tmp, PCIE_RC_CFG_VENDOR_SPECIFIC_REG1_LITTLE_ENDIAN, | 
|  | PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1_ENDIAN_MODE_BAR2_MASK); | 
|  | writel(tmp, base + PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1); | 
|  |  | 
|  | if (pcie->cfg->post_setup) { | 
|  | ret = pcie->cfg->post_setup(pcie); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This extends the timeout period for an access to an internal bus.  This | 
|  | * access timeout may occur during L1SS sleep periods, even without the | 
|  | * presence of a PCIe access. | 
|  | */ | 
|  | static void brcm_extend_rbus_timeout(struct brcm_pcie *pcie) | 
|  | { | 
|  | /* TIMEOUT register is two registers before RGR1_SW_INIT_1 */ | 
|  | const unsigned int REG_OFFSET = PCIE_RGR1_SW_INIT_1(pcie) - 8; | 
|  | u32 timeout_us = 4000000; /* 4 seconds, our setting for L1SS */ | 
|  |  | 
|  | /* 7712 does not have this (RGR1) timer */ | 
|  | if (pcie->cfg->soc_base == BCM7712) | 
|  | return; | 
|  |  | 
|  | /* Each unit in timeout register is 1/216,000,000 seconds */ | 
|  | writel(216 * timeout_us, pcie->base + REG_OFFSET); | 
|  | } | 
|  |  | 
|  | static void brcm_config_clkreq(struct brcm_pcie *pcie) | 
|  | { | 
|  | static const char err_msg[] = "invalid 'brcm,clkreq-mode' DT string\n"; | 
|  | const char *mode = "default"; | 
|  | u32 clkreq_cntl; | 
|  | int ret, tmp; | 
|  |  | 
|  | ret = of_property_read_string(pcie->np, "brcm,clkreq-mode", &mode); | 
|  | if (ret && ret != -EINVAL) { | 
|  | dev_err(pcie->dev, err_msg); | 
|  | mode = "safe"; | 
|  | } | 
|  |  | 
|  | /* Start out assuming safe mode (both mode bits cleared) */ | 
|  | clkreq_cntl = readl(pcie->base + HARD_DEBUG(pcie)); | 
|  | clkreq_cntl &= ~PCIE_CLKREQ_MASK; | 
|  |  | 
|  | if (strcmp(mode, "no-l1ss") == 0) { | 
|  | /* | 
|  | * "no-l1ss" -- Provides Clock Power Management, L0s, and | 
|  | * L1, but cannot provide L1 substate (L1SS) power | 
|  | * savings. If the downstream device connected to the RC is | 
|  | * L1SS capable AND the OS enables L1SS, all PCIe traffic | 
|  | * may abruptly halt, potentially hanging the system. | 
|  | */ | 
|  | clkreq_cntl |= PCIE_MISC_HARD_PCIE_HARD_DEBUG_CLKREQ_DEBUG_ENABLE_MASK; | 
|  | /* | 
|  | * We want to un-advertise L1 substates because if the OS | 
|  | * tries to configure the controller into using L1 substate | 
|  | * power savings it may fail or hang when the RC HW is in | 
|  | * "no-l1ss" mode. | 
|  | */ | 
|  | tmp = readl(pcie->base + PCIE_RC_CFG_PRIV1_ROOT_CAP); | 
|  | u32p_replace_bits(&tmp, 2, PCIE_RC_CFG_PRIV1_ROOT_CAP_L1SS_MODE_MASK); | 
|  | writel(tmp, pcie->base + PCIE_RC_CFG_PRIV1_ROOT_CAP); | 
|  |  | 
|  | } else if (strcmp(mode, "default") == 0) { | 
|  | /* | 
|  | * "default" -- Provides L0s, L1, and L1SS, but not | 
|  | * compliant to provide Clock Power Management; | 
|  | * specifically, may not be able to meet the Tclron max | 
|  | * timing of 400ns as specified in "Dynamic Clock Control", | 
|  | * section 3.2.5.2.2 of the PCIe spec.  This situation is | 
|  | * atypical and should happen only with older devices. | 
|  | */ | 
|  | clkreq_cntl |= PCIE_MISC_HARD_PCIE_HARD_DEBUG_L1SS_ENABLE_MASK; | 
|  | brcm_extend_rbus_timeout(pcie); | 
|  |  | 
|  | } else { | 
|  | /* | 
|  | * "safe" -- No power savings; refclk is driven by RC | 
|  | * unconditionally. | 
|  | */ | 
|  | if (strcmp(mode, "safe") != 0) | 
|  | dev_err(pcie->dev, err_msg); | 
|  | mode = "safe"; | 
|  | } | 
|  | writel(clkreq_cntl, pcie->base + HARD_DEBUG(pcie)); | 
|  |  | 
|  | dev_info(pcie->dev, "clkreq-mode set to %s\n", mode); | 
|  | } | 
|  |  | 
|  | static int brcm_pcie_start_link(struct brcm_pcie *pcie) | 
|  | { | 
|  | struct device *dev = pcie->dev; | 
|  | void __iomem *base = pcie->base; | 
|  | u16 nlw, cls, lnksta; | 
|  | bool ssc_good = false; | 
|  | int ret, i; | 
|  |  | 
|  | /* Limit the generation if specified */ | 
|  | if (pcie->gen) | 
|  | brcm_pcie_set_gen(pcie, pcie->gen); | 
|  |  | 
|  | /* Unassert the fundamental reset */ | 
|  | ret = pcie->cfg->perst_set(pcie, 0); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | msleep(PCIE_RESET_CONFIG_WAIT_MS); | 
|  |  | 
|  | /* | 
|  | * Give the RC/EP even more time to wake up, before trying to | 
|  | * configure RC.  Intermittently check status for link-up, up to a | 
|  | * total of 100ms. | 
|  | */ | 
|  | for (i = 0; i < 100 && !brcm_pcie_link_up(pcie); i += 5) | 
|  | msleep(5); | 
|  |  | 
|  | if (!brcm_pcie_link_up(pcie)) { | 
|  | dev_err(dev, "link down\n"); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | brcm_config_clkreq(pcie); | 
|  |  | 
|  | if (pcie->ssc) { | 
|  | ret = brcm_pcie_set_ssc(pcie); | 
|  | if (ret == 0) | 
|  | ssc_good = true; | 
|  | else | 
|  | dev_err(dev, "failed attempt to enter ssc mode\n"); | 
|  | } | 
|  |  | 
|  | lnksta = readw(base + BRCM_PCIE_CAP_REGS + PCI_EXP_LNKSTA); | 
|  | cls = FIELD_GET(PCI_EXP_LNKSTA_CLS, lnksta); | 
|  | nlw = FIELD_GET(PCI_EXP_LNKSTA_NLW, lnksta); | 
|  | dev_info(dev, "link up, %s x%u %s\n", | 
|  | pci_speed_string(pcie_link_speed[cls]), nlw, | 
|  | ssc_good ? "(SSC)" : "(!SSC)"); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const char * const supplies[] = { | 
|  | "vpcie3v3", | 
|  | "vpcie3v3aux", | 
|  | "vpcie12v", | 
|  | }; | 
|  |  | 
|  | static void *alloc_subdev_regulators(struct device *dev) | 
|  | { | 
|  | const size_t size = sizeof(struct subdev_regulators) + | 
|  | sizeof(struct regulator_bulk_data) * ARRAY_SIZE(supplies); | 
|  | struct subdev_regulators *sr; | 
|  | int i; | 
|  |  | 
|  | sr = devm_kzalloc(dev, size, GFP_KERNEL); | 
|  | if (sr) { | 
|  | sr->num_supplies = ARRAY_SIZE(supplies); | 
|  | for (i = 0; i < ARRAY_SIZE(supplies); i++) | 
|  | sr->supplies[i].supply = supplies[i]; | 
|  | } | 
|  |  | 
|  | return sr; | 
|  | } | 
|  |  | 
|  | static int brcm_pcie_add_bus(struct pci_bus *bus) | 
|  | { | 
|  | struct brcm_pcie *pcie = bus->sysdata; | 
|  | struct device *dev = &bus->dev; | 
|  | struct subdev_regulators *sr; | 
|  | int ret; | 
|  |  | 
|  | if (!bus->parent || !pci_is_root_bus(bus->parent)) | 
|  | return 0; | 
|  |  | 
|  | if (dev->of_node) { | 
|  | sr = alloc_subdev_regulators(dev); | 
|  | if (!sr) { | 
|  | dev_info(dev, "Can't allocate regulators for downstream device\n"); | 
|  | goto no_regulators; | 
|  | } | 
|  |  | 
|  | pcie->sr = sr; | 
|  |  | 
|  | ret = regulator_bulk_get(dev, sr->num_supplies, sr->supplies); | 
|  | if (ret) { | 
|  | dev_info(dev, "Did not get regulators, err=%d\n", ret); | 
|  | pcie->sr = NULL; | 
|  | goto no_regulators; | 
|  | } | 
|  |  | 
|  | ret = regulator_bulk_enable(sr->num_supplies, sr->supplies); | 
|  | if (ret) { | 
|  | dev_err(dev, "Can't enable regulators for downstream device\n"); | 
|  | regulator_bulk_free(sr->num_supplies, sr->supplies); | 
|  | pcie->sr = NULL; | 
|  | } | 
|  | } | 
|  |  | 
|  | no_regulators: | 
|  | brcm_pcie_start_link(pcie); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void brcm_pcie_remove_bus(struct pci_bus *bus) | 
|  | { | 
|  | struct brcm_pcie *pcie = bus->sysdata; | 
|  | struct subdev_regulators *sr = pcie->sr; | 
|  | struct device *dev = &bus->dev; | 
|  |  | 
|  | if (!sr || !bus->parent || !pci_is_root_bus(bus->parent)) | 
|  | return; | 
|  |  | 
|  | if (regulator_bulk_disable(sr->num_supplies, sr->supplies)) | 
|  | dev_err(dev, "Failed to disable regulators for downstream device\n"); | 
|  | regulator_bulk_free(sr->num_supplies, sr->supplies); | 
|  | pcie->sr = NULL; | 
|  | } | 
|  |  | 
|  | /* L23 is a low-power PCIe link state */ | 
|  | static void brcm_pcie_enter_l23(struct brcm_pcie *pcie) | 
|  | { | 
|  | void __iomem *base = pcie->base; | 
|  | int l23, i; | 
|  | u32 tmp; | 
|  |  | 
|  | /* Assert request for L23 */ | 
|  | tmp = readl(base + PCIE_MISC_PCIE_CTRL); | 
|  | u32p_replace_bits(&tmp, 1, PCIE_MISC_PCIE_CTRL_PCIE_L23_REQUEST_MASK); | 
|  | writel(tmp, base + PCIE_MISC_PCIE_CTRL); | 
|  |  | 
|  | /* Wait up to 36 msec for L23 */ | 
|  | tmp = readl(base + PCIE_MISC_PCIE_STATUS); | 
|  | l23 = FIELD_GET(PCIE_MISC_PCIE_STATUS_PCIE_LINK_IN_L23_MASK, tmp); | 
|  | for (i = 0; i < 15 && !l23; i++) { | 
|  | usleep_range(2000, 2400); | 
|  | tmp = readl(base + PCIE_MISC_PCIE_STATUS); | 
|  | l23 = FIELD_GET(PCIE_MISC_PCIE_STATUS_PCIE_LINK_IN_L23_MASK, | 
|  | tmp); | 
|  | } | 
|  |  | 
|  | if (!l23) | 
|  | dev_err(pcie->dev, "failed to enter low-power link state\n"); | 
|  | } | 
|  |  | 
|  | static int brcm_phy_cntl(struct brcm_pcie *pcie, const int start) | 
|  | { | 
|  | static const u32 shifts[PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_NFLDS] = { | 
|  | PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_PWRDN_SHIFT, | 
|  | PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_RESET_SHIFT, | 
|  | PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_DIG_RESET_SHIFT,}; | 
|  | static const u32 masks[PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_NFLDS] = { | 
|  | PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_PWRDN_MASK, | 
|  | PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_RESET_MASK, | 
|  | PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_DIG_RESET_MASK,}; | 
|  | const int beg = start ? 0 : PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_NFLDS - 1; | 
|  | const int end = start ? PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_NFLDS : -1; | 
|  | u32 tmp, combined_mask = 0; | 
|  | u32 val; | 
|  | void __iomem *base = pcie->base; | 
|  | int i, ret; | 
|  |  | 
|  | for (i = beg; i != end; start ? i++ : i--) { | 
|  | val = start ? BIT_MASK(shifts[i]) : 0; | 
|  | tmp = readl(base + PCIE_DVT_PMU_PCIE_PHY_CTRL); | 
|  | tmp = (tmp & ~masks[i]) | (val & masks[i]); | 
|  | writel(tmp, base + PCIE_DVT_PMU_PCIE_PHY_CTRL); | 
|  | usleep_range(50, 200); | 
|  | combined_mask |= masks[i]; | 
|  | } | 
|  |  | 
|  | tmp = readl(base + PCIE_DVT_PMU_PCIE_PHY_CTRL); | 
|  | val = start ? combined_mask : 0; | 
|  |  | 
|  | ret = (tmp & combined_mask) == val ? 0 : -EIO; | 
|  | if (ret) | 
|  | dev_err(pcie->dev, "failed to %s phy\n", (start ? "start" : "stop")); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static inline int brcm_phy_start(struct brcm_pcie *pcie) | 
|  | { | 
|  | return pcie->cfg->has_phy ? brcm_phy_cntl(pcie, 1) : 0; | 
|  | } | 
|  |  | 
|  | static inline int brcm_phy_stop(struct brcm_pcie *pcie) | 
|  | { | 
|  | return pcie->cfg->has_phy ? brcm_phy_cntl(pcie, 0) : 0; | 
|  | } | 
|  |  | 
|  | static int brcm_pcie_turn_off(struct brcm_pcie *pcie) | 
|  | { | 
|  | void __iomem *base = pcie->base; | 
|  | int tmp, ret; | 
|  |  | 
|  | if (brcm_pcie_link_up(pcie)) | 
|  | brcm_pcie_enter_l23(pcie); | 
|  | /* Assert fundamental reset */ | 
|  | ret = pcie->cfg->perst_set(pcie, 1); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | /* Deassert request for L23 in case it was asserted */ | 
|  | tmp = readl(base + PCIE_MISC_PCIE_CTRL); | 
|  | u32p_replace_bits(&tmp, 0, PCIE_MISC_PCIE_CTRL_PCIE_L23_REQUEST_MASK); | 
|  | writel(tmp, base + PCIE_MISC_PCIE_CTRL); | 
|  |  | 
|  | /* Turn off SerDes */ | 
|  | tmp = readl(base + HARD_DEBUG(pcie)); | 
|  | u32p_replace_bits(&tmp, 1, PCIE_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK); | 
|  | writel(tmp, base + HARD_DEBUG(pcie)); | 
|  |  | 
|  | if (!(pcie->cfg->quirks & CFG_QUIRK_AVOID_BRIDGE_SHUTDOWN)) | 
|  | /* Shutdown PCIe bridge */ | 
|  | ret = pcie->cfg->bridge_sw_init_set(pcie, 1); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int pci_dev_may_wakeup(struct pci_dev *dev, void *data) | 
|  | { | 
|  | bool *ret = data; | 
|  |  | 
|  | if (device_may_wakeup(&dev->dev)) { | 
|  | *ret = true; | 
|  | dev_info(&dev->dev, "Possible wake-up device; regulators will not be disabled\n"); | 
|  | } | 
|  | return (int) *ret; | 
|  | } | 
|  |  | 
|  | static int brcm_pcie_suspend_noirq(struct device *dev) | 
|  | { | 
|  | struct brcm_pcie *pcie = dev_get_drvdata(dev); | 
|  | struct pci_host_bridge *bridge = pci_host_bridge_from_priv(pcie); | 
|  | int ret, rret; | 
|  |  | 
|  | ret = brcm_pcie_turn_off(pcie); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | /* | 
|  | * If brcm_phy_stop() returns an error, just dev_err(). If we | 
|  | * return the error it will cause the suspend to fail and this is a | 
|  | * forgivable offense that will probably be erased on resume. | 
|  | */ | 
|  | if (brcm_phy_stop(pcie)) | 
|  | dev_err(dev, "Could not stop phy for suspend\n"); | 
|  |  | 
|  | ret = reset_control_rearm(pcie->rescal); | 
|  | if (ret) { | 
|  | dev_err(dev, "Could not rearm rescal reset\n"); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | if (pcie->sr) { | 
|  | /* | 
|  | * Now turn off the regulators, but if at least one | 
|  | * downstream device is enabled as a wake-up source, do not | 
|  | * turn off regulators. | 
|  | */ | 
|  | pcie->ep_wakeup_capable = false; | 
|  | pci_walk_bus(bridge->bus, pci_dev_may_wakeup, | 
|  | &pcie->ep_wakeup_capable); | 
|  | if (!pcie->ep_wakeup_capable) { | 
|  | ret = regulator_bulk_disable(pcie->sr->num_supplies, | 
|  | pcie->sr->supplies); | 
|  | if (ret) { | 
|  | dev_err(dev, "Could not turn off regulators\n"); | 
|  | rret = reset_control_reset(pcie->rescal); | 
|  | if (rret) | 
|  | dev_err(dev, "failed to reset 'rascal' controller ret=%d\n", | 
|  | rret); | 
|  | return ret; | 
|  | } | 
|  | } | 
|  | } | 
|  | clk_disable_unprepare(pcie->clk); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int brcm_pcie_resume_noirq(struct device *dev) | 
|  | { | 
|  | struct brcm_pcie *pcie = dev_get_drvdata(dev); | 
|  | void __iomem *base; | 
|  | u32 tmp; | 
|  | int ret, rret; | 
|  |  | 
|  | base = pcie->base; | 
|  | ret = clk_prepare_enable(pcie->clk); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | ret = reset_control_reset(pcie->rescal); | 
|  | if (ret) | 
|  | goto err_disable_clk; | 
|  |  | 
|  | ret = brcm_phy_start(pcie); | 
|  | if (ret) | 
|  | goto err_reset; | 
|  |  | 
|  | /* Take bridge out of reset so we can access the SERDES reg */ | 
|  | pcie->cfg->bridge_sw_init_set(pcie, 0); | 
|  |  | 
|  | /* SERDES_IDDQ = 0 */ | 
|  | tmp = readl(base + HARD_DEBUG(pcie)); | 
|  | u32p_replace_bits(&tmp, 0, PCIE_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK); | 
|  | writel(tmp, base + HARD_DEBUG(pcie)); | 
|  |  | 
|  | /* wait for serdes to be stable */ | 
|  | udelay(100); | 
|  |  | 
|  | ret = brcm_pcie_setup(pcie); | 
|  | if (ret) | 
|  | goto err_reset; | 
|  |  | 
|  | if (pcie->sr) { | 
|  | if (pcie->ep_wakeup_capable) { | 
|  | /* | 
|  | * We are resuming from a suspend.  In the suspend we | 
|  | * did not disable the power supplies, so there is | 
|  | * no need to enable them (and falsely increase their | 
|  | * usage count). | 
|  | */ | 
|  | pcie->ep_wakeup_capable = false; | 
|  | } else { | 
|  | ret = regulator_bulk_enable(pcie->sr->num_supplies, | 
|  | pcie->sr->supplies); | 
|  | if (ret) { | 
|  | dev_err(dev, "Could not turn on regulators\n"); | 
|  | goto err_reset; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | ret = brcm_pcie_start_link(pcie); | 
|  | if (ret) | 
|  | goto err_regulator; | 
|  |  | 
|  | if (pcie->msi) | 
|  | brcm_msi_set_regs(pcie->msi); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_regulator: | 
|  | if (pcie->sr) | 
|  | regulator_bulk_disable(pcie->sr->num_supplies, pcie->sr->supplies); | 
|  | err_reset: | 
|  | rret = reset_control_rearm(pcie->rescal); | 
|  | if (rret) | 
|  | dev_err(pcie->dev, "failed to rearm 'rescal' reset, err=%d\n", rret); | 
|  | err_disable_clk: | 
|  | clk_disable_unprepare(pcie->clk); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void __brcm_pcie_remove(struct brcm_pcie *pcie) | 
|  | { | 
|  | brcm_msi_remove(pcie); | 
|  | brcm_pcie_turn_off(pcie); | 
|  | if (brcm_phy_stop(pcie)) | 
|  | dev_err(pcie->dev, "Could not stop phy\n"); | 
|  | if (reset_control_rearm(pcie->rescal)) | 
|  | dev_err(pcie->dev, "Could not rearm rescal reset\n"); | 
|  | clk_disable_unprepare(pcie->clk); | 
|  | } | 
|  |  | 
|  | static void brcm_pcie_remove(struct platform_device *pdev) | 
|  | { | 
|  | struct brcm_pcie *pcie = platform_get_drvdata(pdev); | 
|  | struct pci_host_bridge *bridge = pci_host_bridge_from_priv(pcie); | 
|  |  | 
|  | pci_stop_root_bus(bridge->bus); | 
|  | pci_remove_root_bus(bridge->bus); | 
|  | __brcm_pcie_remove(pcie); | 
|  | } | 
|  |  | 
|  | static const int pcie_offsets[] = { | 
|  | [RGR1_SW_INIT_1]	= 0x9210, | 
|  | [EXT_CFG_INDEX]		= 0x9000, | 
|  | [EXT_CFG_DATA]		= 0x8000, | 
|  | [PCIE_HARD_DEBUG]	= 0x4204, | 
|  | [PCIE_INTR2_CPU_BASE]	= 0x4300, | 
|  | }; | 
|  |  | 
|  | static const int pcie_offsets_bcm7278[] = { | 
|  | [RGR1_SW_INIT_1]	= 0xc010, | 
|  | [EXT_CFG_INDEX]		= 0x9000, | 
|  | [EXT_CFG_DATA]		= 0x8000, | 
|  | [PCIE_HARD_DEBUG]	= 0x4204, | 
|  | [PCIE_INTR2_CPU_BASE]	= 0x4300, | 
|  | }; | 
|  |  | 
|  | static const int pcie_offsets_bcm7425[] = { | 
|  | [RGR1_SW_INIT_1]	= 0x8010, | 
|  | [EXT_CFG_INDEX]		= 0x8300, | 
|  | [EXT_CFG_DATA]		= 0x8304, | 
|  | [PCIE_HARD_DEBUG]	= 0x4204, | 
|  | [PCIE_INTR2_CPU_BASE]	= 0x4300, | 
|  | }; | 
|  |  | 
|  | static const int pcie_offsets_bcm7712[] = { | 
|  | [RGR1_SW_INIT_1]	= 0x9210, | 
|  | [EXT_CFG_INDEX]		= 0x9000, | 
|  | [EXT_CFG_DATA]		= 0x8000, | 
|  | [PCIE_HARD_DEBUG]	= 0x4304, | 
|  | [PCIE_INTR2_CPU_BASE]	= 0x4400, | 
|  | }; | 
|  |  | 
|  | static const struct pcie_cfg_data generic_cfg = { | 
|  | .offsets	= pcie_offsets, | 
|  | .soc_base	= GENERIC, | 
|  | .perst_set	= brcm_pcie_perst_set_generic, | 
|  | .bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_generic, | 
|  | .num_inbound_wins = 3, | 
|  | }; | 
|  |  | 
|  | static const struct pcie_cfg_data bcm2711_cfg = { | 
|  | .offsets	= pcie_offsets, | 
|  | .soc_base	= BCM2711, | 
|  | .perst_set	= brcm_pcie_perst_set_generic, | 
|  | .bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_generic, | 
|  | .num_inbound_wins = 3, | 
|  | }; | 
|  |  | 
|  | static const struct pcie_cfg_data bcm2712_cfg = { | 
|  | .offsets	= pcie_offsets_bcm7712, | 
|  | .soc_base	= BCM7712, | 
|  | .perst_set	= brcm_pcie_perst_set_7278, | 
|  | .bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_generic, | 
|  | .post_setup	= brcm_pcie_post_setup_bcm2712, | 
|  | .quirks		= CFG_QUIRK_AVOID_BRIDGE_SHUTDOWN, | 
|  | .num_inbound_wins = 10, | 
|  | }; | 
|  |  | 
|  | static const struct pcie_cfg_data bcm4908_cfg = { | 
|  | .offsets	= pcie_offsets, | 
|  | .soc_base	= BCM4908, | 
|  | .perst_set	= brcm_pcie_perst_set_4908, | 
|  | .bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_generic, | 
|  | .num_inbound_wins = 3, | 
|  | }; | 
|  |  | 
|  | static const struct pcie_cfg_data bcm7278_cfg = { | 
|  | .offsets	= pcie_offsets_bcm7278, | 
|  | .soc_base	= BCM7278, | 
|  | .perst_set	= brcm_pcie_perst_set_7278, | 
|  | .bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_7278, | 
|  | .num_inbound_wins = 3, | 
|  | }; | 
|  |  | 
|  | static const struct pcie_cfg_data bcm7425_cfg = { | 
|  | .offsets	= pcie_offsets_bcm7425, | 
|  | .soc_base	= BCM7425, | 
|  | .perst_set	= brcm_pcie_perst_set_generic, | 
|  | .bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_generic, | 
|  | .num_inbound_wins = 3, | 
|  | }; | 
|  |  | 
|  | static const struct pcie_cfg_data bcm7435_cfg = { | 
|  | .offsets	= pcie_offsets, | 
|  | .soc_base	= BCM7435, | 
|  | .perst_set	= brcm_pcie_perst_set_generic, | 
|  | .bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_generic, | 
|  | .num_inbound_wins = 3, | 
|  | }; | 
|  |  | 
|  | static const struct pcie_cfg_data bcm7216_cfg = { | 
|  | .offsets	= pcie_offsets_bcm7278, | 
|  | .soc_base	= BCM7278, | 
|  | .perst_set	= brcm_pcie_perst_set_7278, | 
|  | .bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_7278, | 
|  | .has_phy	= true, | 
|  | .num_inbound_wins = 3, | 
|  | }; | 
|  |  | 
|  | static const struct pcie_cfg_data bcm7712_cfg = { | 
|  | .offsets	= pcie_offsets_bcm7712, | 
|  | .perst_set	= brcm_pcie_perst_set_7278, | 
|  | .bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_generic, | 
|  | .soc_base	= BCM7712, | 
|  | .num_inbound_wins = 10, | 
|  | }; | 
|  |  | 
|  | static const struct of_device_id brcm_pcie_match[] = { | 
|  | { .compatible = "brcm,bcm2711-pcie", .data = &bcm2711_cfg }, | 
|  | { .compatible = "brcm,bcm2712-pcie", .data = &bcm2712_cfg }, | 
|  | { .compatible = "brcm,bcm4908-pcie", .data = &bcm4908_cfg }, | 
|  | { .compatible = "brcm,bcm7211-pcie", .data = &generic_cfg }, | 
|  | { .compatible = "brcm,bcm7216-pcie", .data = &bcm7216_cfg }, | 
|  | { .compatible = "brcm,bcm7278-pcie", .data = &bcm7278_cfg }, | 
|  | { .compatible = "brcm,bcm7425-pcie", .data = &bcm7425_cfg }, | 
|  | { .compatible = "brcm,bcm7435-pcie", .data = &bcm7435_cfg }, | 
|  | { .compatible = "brcm,bcm7445-pcie", .data = &generic_cfg }, | 
|  | { .compatible = "brcm,bcm7712-pcie", .data = &bcm7712_cfg }, | 
|  | {}, | 
|  | }; | 
|  |  | 
|  | static struct pci_ops brcm_pcie_ops = { | 
|  | .map_bus = brcm_pcie_map_bus, | 
|  | .read = pci_generic_config_read, | 
|  | .write = pci_generic_config_write, | 
|  | .add_bus = brcm_pcie_add_bus, | 
|  | .remove_bus = brcm_pcie_remove_bus, | 
|  | }; | 
|  |  | 
|  | static struct pci_ops brcm7425_pcie_ops = { | 
|  | .map_bus = brcm7425_pcie_map_bus, | 
|  | .read = pci_generic_config_read32, | 
|  | .write = pci_generic_config_write32, | 
|  | .add_bus = brcm_pcie_add_bus, | 
|  | .remove_bus = brcm_pcie_remove_bus, | 
|  | }; | 
|  |  | 
|  | static int brcm_pcie_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct device_node *np = pdev->dev.of_node; | 
|  | struct pci_host_bridge *bridge; | 
|  | const struct pcie_cfg_data *data; | 
|  | struct brcm_pcie *pcie; | 
|  | int ret; | 
|  |  | 
|  | bridge = devm_pci_alloc_host_bridge(&pdev->dev, sizeof(*pcie)); | 
|  | if (!bridge) | 
|  | return -ENOMEM; | 
|  |  | 
|  | data = of_device_get_match_data(&pdev->dev); | 
|  | if (!data) { | 
|  | pr_err("failed to look up compatible string\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | pcie = pci_host_bridge_priv(bridge); | 
|  | pcie->dev = &pdev->dev; | 
|  | pcie->np = np; | 
|  | pcie->cfg = data; | 
|  |  | 
|  | pcie->base = devm_platform_ioremap_resource(pdev, 0); | 
|  | if (IS_ERR(pcie->base)) | 
|  | return PTR_ERR(pcie->base); | 
|  |  | 
|  | pcie->clk = devm_clk_get_optional(&pdev->dev, "sw_pcie"); | 
|  | if (IS_ERR(pcie->clk)) | 
|  | return PTR_ERR(pcie->clk); | 
|  |  | 
|  | ret = of_pci_get_max_link_speed(np); | 
|  | pcie->gen = (ret < 0) ? 0 : ret; | 
|  |  | 
|  | pcie->ssc = of_property_read_bool(np, "brcm,enable-ssc"); | 
|  |  | 
|  | pcie->rescal = devm_reset_control_get_optional_shared(&pdev->dev, "rescal"); | 
|  | if (IS_ERR(pcie->rescal)) | 
|  | return PTR_ERR(pcie->rescal); | 
|  |  | 
|  | pcie->perst_reset = devm_reset_control_get_optional_exclusive(&pdev->dev, "perst"); | 
|  | if (IS_ERR(pcie->perst_reset)) | 
|  | return PTR_ERR(pcie->perst_reset); | 
|  |  | 
|  | pcie->bridge_reset = devm_reset_control_get_optional_exclusive(&pdev->dev, "bridge"); | 
|  | if (IS_ERR(pcie->bridge_reset)) | 
|  | return PTR_ERR(pcie->bridge_reset); | 
|  |  | 
|  | pcie->swinit_reset = devm_reset_control_get_optional_exclusive(&pdev->dev, "swinit"); | 
|  | if (IS_ERR(pcie->swinit_reset)) | 
|  | return PTR_ERR(pcie->swinit_reset); | 
|  |  | 
|  | ret = clk_prepare_enable(pcie->clk); | 
|  | if (ret) | 
|  | return dev_err_probe(&pdev->dev, ret, "could not enable clock\n"); | 
|  |  | 
|  | pcie->cfg->bridge_sw_init_set(pcie, 0); | 
|  |  | 
|  | if (pcie->swinit_reset) { | 
|  | ret = reset_control_assert(pcie->swinit_reset); | 
|  | if (ret) { | 
|  | clk_disable_unprepare(pcie->clk); | 
|  | return dev_err_probe(&pdev->dev, ret, | 
|  | "could not assert reset 'swinit'\n"); | 
|  | } | 
|  |  | 
|  | /* HW team recommends 1us for proper sync and propagation of reset */ | 
|  | udelay(1); | 
|  |  | 
|  | ret = reset_control_deassert(pcie->swinit_reset); | 
|  | if (ret) { | 
|  | clk_disable_unprepare(pcie->clk); | 
|  | return dev_err_probe(&pdev->dev, ret, | 
|  | "could not de-assert reset 'swinit'\n"); | 
|  | } | 
|  | } | 
|  |  | 
|  | ret = reset_control_reset(pcie->rescal); | 
|  | if (ret) { | 
|  | clk_disable_unprepare(pcie->clk); | 
|  | return dev_err_probe(&pdev->dev, ret, "failed to deassert 'rescal'\n"); | 
|  | } | 
|  |  | 
|  | ret = brcm_phy_start(pcie); | 
|  | if (ret) { | 
|  | reset_control_rearm(pcie->rescal); | 
|  | clk_disable_unprepare(pcie->clk); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | ret = brcm_pcie_setup(pcie); | 
|  | if (ret) | 
|  | goto fail; | 
|  |  | 
|  | pcie->hw_rev = readl(pcie->base + PCIE_MISC_REVISION); | 
|  | if (pcie->cfg->soc_base == BCM4908 && | 
|  | pcie->hw_rev >= BRCM_PCIE_HW_REV_3_20) { | 
|  | dev_err(pcie->dev, "hardware revision with unsupported PERST# setup\n"); | 
|  | ret = -ENODEV; | 
|  | goto fail; | 
|  | } | 
|  |  | 
|  | if (pci_msi_enabled()) { | 
|  | struct device_node *msi_np = of_parse_phandle(pcie->np, "msi-parent", 0); | 
|  |  | 
|  | if (msi_np == pcie->np) | 
|  | ret = brcm_pcie_enable_msi(pcie); | 
|  |  | 
|  | of_node_put(msi_np); | 
|  |  | 
|  | if (ret) { | 
|  | dev_err(pcie->dev, "probe of internal MSI failed"); | 
|  | goto fail; | 
|  | } | 
|  | } | 
|  |  | 
|  | bridge->ops = pcie->cfg->soc_base == BCM7425 ? | 
|  | &brcm7425_pcie_ops : &brcm_pcie_ops; | 
|  | bridge->sysdata = pcie; | 
|  |  | 
|  | platform_set_drvdata(pdev, pcie); | 
|  |  | 
|  | ret = pci_host_probe(bridge); | 
|  | if (!ret && !brcm_pcie_link_up(pcie)) | 
|  | ret = -ENODEV; | 
|  |  | 
|  | if (ret) { | 
|  | brcm_pcie_remove(pdev); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | fail: | 
|  | __brcm_pcie_remove(pcie); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | MODULE_DEVICE_TABLE(of, brcm_pcie_match); | 
|  |  | 
|  | static const struct dev_pm_ops brcm_pcie_pm_ops = { | 
|  | .suspend_noirq = brcm_pcie_suspend_noirq, | 
|  | .resume_noirq = brcm_pcie_resume_noirq, | 
|  | }; | 
|  |  | 
|  | static struct platform_driver brcm_pcie_driver = { | 
|  | .probe = brcm_pcie_probe, | 
|  | .remove = brcm_pcie_remove, | 
|  | .driver = { | 
|  | .name = "brcm-pcie", | 
|  | .of_match_table = brcm_pcie_match, | 
|  | .pm = &brcm_pcie_pm_ops, | 
|  | }, | 
|  | }; | 
|  | module_platform_driver(brcm_pcie_driver); | 
|  |  | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_DESCRIPTION("Broadcom STB PCIe RC driver"); | 
|  | MODULE_AUTHOR("Broadcom"); | 
|  | MODULE_SOFTDEP("pre: irq_bcm2712_mip"); |