|  | // SPDX-License-Identifier: GPL-2.0-or-later | 
|  | /* | 
|  | * f71805f.c - driver for the Fintek F71805F/FG and F71872F/FG Super-I/O | 
|  | *             chips integrated hardware monitoring features | 
|  | * Copyright (C) 2005-2006  Jean Delvare <jdelvare@suse.de> | 
|  | * | 
|  | * The F71805F/FG is a LPC Super-I/O chip made by Fintek. It integrates | 
|  | * complete hardware monitoring features: voltage, fan and temperature | 
|  | * sensors, and manual and automatic fan speed control. | 
|  | * | 
|  | * The F71872F/FG is almost the same, with two more voltages monitored, | 
|  | * and 6 VID inputs. | 
|  | * | 
|  | * The F71806F/FG is essentially the same as the F71872F/FG. It even has | 
|  | * the same chip ID, so the driver can't differentiate between. | 
|  | */ | 
|  |  | 
|  | #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/jiffies.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/hwmon.h> | 
|  | #include <linux/hwmon-sysfs.h> | 
|  | #include <linux/err.h> | 
|  | #include <linux/mutex.h> | 
|  | #include <linux/sysfs.h> | 
|  | #include <linux/ioport.h> | 
|  | #include <linux/acpi.h> | 
|  | #include <linux/io.h> | 
|  |  | 
|  | static unsigned short force_id; | 
|  | module_param(force_id, ushort, 0); | 
|  | MODULE_PARM_DESC(force_id, "Override the detected device ID"); | 
|  |  | 
|  | static struct platform_device *pdev; | 
|  |  | 
|  | #define DRVNAME "f71805f" | 
|  | enum kinds { f71805f, f71872f }; | 
|  |  | 
|  | /* | 
|  | * Super-I/O constants and functions | 
|  | */ | 
|  |  | 
|  | #define F71805F_LD_HWM		0x04 | 
|  |  | 
|  | #define SIO_REG_LDSEL		0x07	/* Logical device select */ | 
|  | #define SIO_REG_DEVID		0x20	/* Device ID (2 bytes) */ | 
|  | #define SIO_REG_DEVREV		0x22	/* Device revision */ | 
|  | #define SIO_REG_MANID		0x23	/* Fintek ID (2 bytes) */ | 
|  | #define SIO_REG_FNSEL1		0x29	/* Multi Function Select 1 (F71872F) */ | 
|  | #define SIO_REG_ENABLE		0x30	/* Logical device enable */ | 
|  | #define SIO_REG_ADDR		0x60	/* Logical device address (2 bytes) */ | 
|  |  | 
|  | #define SIO_FINTEK_ID		0x1934 | 
|  | #define SIO_F71805F_ID		0x0406 | 
|  | #define SIO_F71872F_ID		0x0341 | 
|  |  | 
|  | static inline int | 
|  | superio_inb(int base, int reg) | 
|  | { | 
|  | outb(reg, base); | 
|  | return inb(base + 1); | 
|  | } | 
|  |  | 
|  | static int | 
|  | superio_inw(int base, int reg) | 
|  | { | 
|  | int val; | 
|  | outb(reg++, base); | 
|  | val = inb(base + 1) << 8; | 
|  | outb(reg, base); | 
|  | val |= inb(base + 1); | 
|  | return val; | 
|  | } | 
|  |  | 
|  | static inline void | 
|  | superio_select(int base, int ld) | 
|  | { | 
|  | outb(SIO_REG_LDSEL, base); | 
|  | outb(ld, base + 1); | 
|  | } | 
|  |  | 
|  | static inline int | 
|  | superio_enter(int base) | 
|  | { | 
|  | if (!request_muxed_region(base, 2, DRVNAME)) | 
|  | return -EBUSY; | 
|  |  | 
|  | outb(0x87, base); | 
|  | outb(0x87, base); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static inline void | 
|  | superio_exit(int base) | 
|  | { | 
|  | outb(0xaa, base); | 
|  | release_region(base, 2); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * ISA constants | 
|  | */ | 
|  |  | 
|  | #define REGION_LENGTH		8 | 
|  | #define ADDR_REG_OFFSET		5 | 
|  | #define DATA_REG_OFFSET		6 | 
|  |  | 
|  | /* | 
|  | * Registers | 
|  | */ | 
|  |  | 
|  | /* in nr from 0 to 10 (8-bit values) */ | 
|  | #define F71805F_REG_IN(nr)		(0x10 + (nr)) | 
|  | #define F71805F_REG_IN_HIGH(nr)		((nr) < 10 ? 0x40 + 2 * (nr) : 0x2E) | 
|  | #define F71805F_REG_IN_LOW(nr)		((nr) < 10 ? 0x41 + 2 * (nr) : 0x2F) | 
|  | /* fan nr from 0 to 2 (12-bit values, two registers) */ | 
|  | #define F71805F_REG_FAN(nr)		(0x20 + 2 * (nr)) | 
|  | #define F71805F_REG_FAN_LOW(nr)		(0x28 + 2 * (nr)) | 
|  | #define F71805F_REG_FAN_TARGET(nr)	(0x69 + 16 * (nr)) | 
|  | #define F71805F_REG_FAN_CTRL(nr)	(0x60 + 16 * (nr)) | 
|  | #define F71805F_REG_PWM_FREQ(nr)	(0x63 + 16 * (nr)) | 
|  | #define F71805F_REG_PWM_DUTY(nr)	(0x6B + 16 * (nr)) | 
|  | /* temp nr from 0 to 2 (8-bit values) */ | 
|  | #define F71805F_REG_TEMP(nr)		(0x1B + (nr)) | 
|  | #define F71805F_REG_TEMP_HIGH(nr)	(0x54 + 2 * (nr)) | 
|  | #define F71805F_REG_TEMP_HYST(nr)	(0x55 + 2 * (nr)) | 
|  | #define F71805F_REG_TEMP_MODE		0x01 | 
|  | /* pwm/fan pwmnr from 0 to 2, auto point apnr from 0 to 2 */ | 
|  | /* map Fintek numbers to our numbers as follows: 9->0, 5->1, 1->2 */ | 
|  | #define F71805F_REG_PWM_AUTO_POINT_TEMP(pwmnr, apnr) \ | 
|  | (0xA0 + 0x10 * (pwmnr) + (2 - (apnr))) | 
|  | #define F71805F_REG_PWM_AUTO_POINT_FAN(pwmnr, apnr) \ | 
|  | (0xA4 + 0x10 * (pwmnr) + \ | 
|  | 2 * (2 - (apnr))) | 
|  |  | 
|  | #define F71805F_REG_START		0x00 | 
|  | /* status nr from 0 to 2 */ | 
|  | #define F71805F_REG_STATUS(nr)		(0x36 + (nr)) | 
|  |  | 
|  | /* individual register bits */ | 
|  | #define FAN_CTRL_DC_MODE		0x10 | 
|  | #define FAN_CTRL_LATCH_FULL		0x08 | 
|  | #define FAN_CTRL_MODE_MASK		0x03 | 
|  | #define FAN_CTRL_MODE_SPEED		0x00 | 
|  | #define FAN_CTRL_MODE_TEMPERATURE	0x01 | 
|  | #define FAN_CTRL_MODE_MANUAL		0x02 | 
|  |  | 
|  | /* | 
|  | * Data structures and manipulation thereof | 
|  | */ | 
|  |  | 
|  | struct f71805f_auto_point { | 
|  | u8 temp[3]; | 
|  | u16 fan[3]; | 
|  | }; | 
|  |  | 
|  | struct f71805f_data { | 
|  | unsigned short addr; | 
|  | const char *name; | 
|  | struct device *hwmon_dev; | 
|  |  | 
|  | struct mutex update_lock; | 
|  | bool valid;		/* true if following fields are valid */ | 
|  | unsigned long last_updated;	/* In jiffies */ | 
|  | unsigned long last_limits;	/* In jiffies */ | 
|  |  | 
|  | /* Register values */ | 
|  | u8 in[11]; | 
|  | u8 in_high[11]; | 
|  | u8 in_low[11]; | 
|  | u16 has_in; | 
|  | u16 fan[3]; | 
|  | u16 fan_low[3]; | 
|  | u16 fan_target[3]; | 
|  | u8 fan_ctrl[3]; | 
|  | u8 pwm[3]; | 
|  | u8 pwm_freq[3]; | 
|  | u8 temp[3]; | 
|  | u8 temp_high[3]; | 
|  | u8 temp_hyst[3]; | 
|  | u8 temp_mode; | 
|  | unsigned long alarms; | 
|  | struct f71805f_auto_point auto_points[3]; | 
|  | }; | 
|  |  | 
|  | struct f71805f_sio_data { | 
|  | enum kinds kind; | 
|  | u8 fnsel1; | 
|  | }; | 
|  |  | 
|  | static inline long in_from_reg(u8 reg) | 
|  | { | 
|  | return reg * 8; | 
|  | } | 
|  |  | 
|  | /* The 2 least significant bits are not used */ | 
|  | static inline u8 in_to_reg(long val) | 
|  | { | 
|  | if (val <= 0) | 
|  | return 0; | 
|  | if (val >= 2016) | 
|  | return 0xfc; | 
|  | return ((val + 16) / 32) << 2; | 
|  | } | 
|  |  | 
|  | /* in0 is downscaled by a factor 2 internally */ | 
|  | static inline long in0_from_reg(u8 reg) | 
|  | { | 
|  | return reg * 16; | 
|  | } | 
|  |  | 
|  | static inline u8 in0_to_reg(long val) | 
|  | { | 
|  | if (val <= 0) | 
|  | return 0; | 
|  | if (val >= 4032) | 
|  | return 0xfc; | 
|  | return ((val + 32) / 64) << 2; | 
|  | } | 
|  |  | 
|  | /* The 4 most significant bits are not used */ | 
|  | static inline long fan_from_reg(u16 reg) | 
|  | { | 
|  | reg &= 0xfff; | 
|  | if (!reg || reg == 0xfff) | 
|  | return 0; | 
|  | return 1500000 / reg; | 
|  | } | 
|  |  | 
|  | static inline u16 fan_to_reg(long rpm) | 
|  | { | 
|  | /* | 
|  | * If the low limit is set below what the chip can measure, | 
|  | * store the largest possible 12-bit value in the registers, | 
|  | * so that no alarm will ever trigger. | 
|  | */ | 
|  | if (rpm < 367) | 
|  | return 0xfff; | 
|  | return 1500000 / rpm; | 
|  | } | 
|  |  | 
|  | static inline unsigned long pwm_freq_from_reg(u8 reg) | 
|  | { | 
|  | unsigned long clock = (reg & 0x80) ? 48000000UL : 1000000UL; | 
|  |  | 
|  | reg &= 0x7f; | 
|  | if (reg == 0) | 
|  | reg++; | 
|  | return clock / (reg << 8); | 
|  | } | 
|  |  | 
|  | static inline u8 pwm_freq_to_reg(unsigned long val) | 
|  | { | 
|  | if (val >= 187500)	/* The highest we can do */ | 
|  | return 0x80; | 
|  | if (val >= 1475)	/* Use 48 MHz clock */ | 
|  | return 0x80 | (48000000UL / (val << 8)); | 
|  | if (val < 31)		/* The lowest we can do */ | 
|  | return 0x7f; | 
|  | else			/* Use 1 MHz clock */ | 
|  | return 1000000UL / (val << 8); | 
|  | } | 
|  |  | 
|  | static inline int pwm_mode_from_reg(u8 reg) | 
|  | { | 
|  | return !(reg & FAN_CTRL_DC_MODE); | 
|  | } | 
|  |  | 
|  | static inline long temp_from_reg(u8 reg) | 
|  | { | 
|  | return reg * 1000; | 
|  | } | 
|  |  | 
|  | static inline u8 temp_to_reg(long val) | 
|  | { | 
|  | if (val <= 0) | 
|  | return 0; | 
|  | if (val >= 1000 * 0xff) | 
|  | return 0xff; | 
|  | return (val + 500) / 1000; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Device I/O access | 
|  | */ | 
|  |  | 
|  | /* Must be called with data->update_lock held, except during initialization */ | 
|  | static u8 f71805f_read8(struct f71805f_data *data, u8 reg) | 
|  | { | 
|  | outb(reg, data->addr + ADDR_REG_OFFSET); | 
|  | return inb(data->addr + DATA_REG_OFFSET); | 
|  | } | 
|  |  | 
|  | /* Must be called with data->update_lock held, except during initialization */ | 
|  | static void f71805f_write8(struct f71805f_data *data, u8 reg, u8 val) | 
|  | { | 
|  | outb(reg, data->addr + ADDR_REG_OFFSET); | 
|  | outb(val, data->addr + DATA_REG_OFFSET); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * It is important to read the MSB first, because doing so latches the | 
|  | * value of the LSB, so we are sure both bytes belong to the same value. | 
|  | * Must be called with data->update_lock held, except during initialization | 
|  | */ | 
|  | static u16 f71805f_read16(struct f71805f_data *data, u8 reg) | 
|  | { | 
|  | u16 val; | 
|  |  | 
|  | outb(reg, data->addr + ADDR_REG_OFFSET); | 
|  | val = inb(data->addr + DATA_REG_OFFSET) << 8; | 
|  | outb(++reg, data->addr + ADDR_REG_OFFSET); | 
|  | val |= inb(data->addr + DATA_REG_OFFSET); | 
|  |  | 
|  | return val; | 
|  | } | 
|  |  | 
|  | /* Must be called with data->update_lock held, except during initialization */ | 
|  | static void f71805f_write16(struct f71805f_data *data, u8 reg, u16 val) | 
|  | { | 
|  | outb(reg, data->addr + ADDR_REG_OFFSET); | 
|  | outb(val >> 8, data->addr + DATA_REG_OFFSET); | 
|  | outb(++reg, data->addr + ADDR_REG_OFFSET); | 
|  | outb(val & 0xff, data->addr + DATA_REG_OFFSET); | 
|  | } | 
|  |  | 
|  | static struct f71805f_data *f71805f_update_device(struct device *dev) | 
|  | { | 
|  | struct f71805f_data *data = dev_get_drvdata(dev); | 
|  | int nr, apnr; | 
|  |  | 
|  | mutex_lock(&data->update_lock); | 
|  |  | 
|  | /* Limit registers cache is refreshed after 60 seconds */ | 
|  | if (time_after(jiffies, data->last_updated + 60 * HZ) | 
|  | || !data->valid) { | 
|  | for (nr = 0; nr < 11; nr++) { | 
|  | if (!(data->has_in & (1 << nr))) | 
|  | continue; | 
|  | data->in_high[nr] = f71805f_read8(data, | 
|  | F71805F_REG_IN_HIGH(nr)); | 
|  | data->in_low[nr] = f71805f_read8(data, | 
|  | F71805F_REG_IN_LOW(nr)); | 
|  | } | 
|  | for (nr = 0; nr < 3; nr++) { | 
|  | data->fan_low[nr] = f71805f_read16(data, | 
|  | F71805F_REG_FAN_LOW(nr)); | 
|  | data->fan_target[nr] = f71805f_read16(data, | 
|  | F71805F_REG_FAN_TARGET(nr)); | 
|  | data->pwm_freq[nr] = f71805f_read8(data, | 
|  | F71805F_REG_PWM_FREQ(nr)); | 
|  | } | 
|  | for (nr = 0; nr < 3; nr++) { | 
|  | data->temp_high[nr] = f71805f_read8(data, | 
|  | F71805F_REG_TEMP_HIGH(nr)); | 
|  | data->temp_hyst[nr] = f71805f_read8(data, | 
|  | F71805F_REG_TEMP_HYST(nr)); | 
|  | } | 
|  | data->temp_mode = f71805f_read8(data, F71805F_REG_TEMP_MODE); | 
|  | for (nr = 0; nr < 3; nr++) { | 
|  | for (apnr = 0; apnr < 3; apnr++) { | 
|  | data->auto_points[nr].temp[apnr] = | 
|  | f71805f_read8(data, | 
|  | F71805F_REG_PWM_AUTO_POINT_TEMP(nr, | 
|  | apnr)); | 
|  | data->auto_points[nr].fan[apnr] = | 
|  | f71805f_read16(data, | 
|  | F71805F_REG_PWM_AUTO_POINT_FAN(nr, | 
|  | apnr)); | 
|  | } | 
|  | } | 
|  |  | 
|  | data->last_limits = jiffies; | 
|  | } | 
|  |  | 
|  | /* Measurement registers cache is refreshed after 1 second */ | 
|  | if (time_after(jiffies, data->last_updated + HZ) | 
|  | || !data->valid) { | 
|  | for (nr = 0; nr < 11; nr++) { | 
|  | if (!(data->has_in & (1 << nr))) | 
|  | continue; | 
|  | data->in[nr] = f71805f_read8(data, | 
|  | F71805F_REG_IN(nr)); | 
|  | } | 
|  | for (nr = 0; nr < 3; nr++) { | 
|  | data->fan[nr] = f71805f_read16(data, | 
|  | F71805F_REG_FAN(nr)); | 
|  | data->fan_ctrl[nr] = f71805f_read8(data, | 
|  | F71805F_REG_FAN_CTRL(nr)); | 
|  | data->pwm[nr] = f71805f_read8(data, | 
|  | F71805F_REG_PWM_DUTY(nr)); | 
|  | } | 
|  | for (nr = 0; nr < 3; nr++) { | 
|  | data->temp[nr] = f71805f_read8(data, | 
|  | F71805F_REG_TEMP(nr)); | 
|  | } | 
|  | data->alarms = f71805f_read8(data, F71805F_REG_STATUS(0)) | 
|  | + (f71805f_read8(data, F71805F_REG_STATUS(1)) << 8) | 
|  | + (f71805f_read8(data, F71805F_REG_STATUS(2)) << 16); | 
|  |  | 
|  | data->last_updated = jiffies; | 
|  | data->valid = true; | 
|  | } | 
|  |  | 
|  | mutex_unlock(&data->update_lock); | 
|  |  | 
|  | return data; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Sysfs interface | 
|  | */ | 
|  |  | 
|  | static ssize_t show_in0(struct device *dev, struct device_attribute *devattr, | 
|  | char *buf) | 
|  | { | 
|  | struct f71805f_data *data = f71805f_update_device(dev); | 
|  | struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); | 
|  | int nr = attr->index; | 
|  |  | 
|  | return sprintf(buf, "%ld\n", in0_from_reg(data->in[nr])); | 
|  | } | 
|  |  | 
|  | static ssize_t show_in0_max(struct device *dev, struct device_attribute | 
|  | *devattr, char *buf) | 
|  | { | 
|  | struct f71805f_data *data = f71805f_update_device(dev); | 
|  | struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); | 
|  | int nr = attr->index; | 
|  |  | 
|  | return sprintf(buf, "%ld\n", in0_from_reg(data->in_high[nr])); | 
|  | } | 
|  |  | 
|  | static ssize_t show_in0_min(struct device *dev, struct device_attribute | 
|  | *devattr, char *buf) | 
|  | { | 
|  | struct f71805f_data *data = f71805f_update_device(dev); | 
|  | struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); | 
|  | int nr = attr->index; | 
|  |  | 
|  | return sprintf(buf, "%ld\n", in0_from_reg(data->in_low[nr])); | 
|  | } | 
|  |  | 
|  | static ssize_t set_in0_max(struct device *dev, struct device_attribute | 
|  | *devattr, const char *buf, size_t count) | 
|  | { | 
|  | struct f71805f_data *data = dev_get_drvdata(dev); | 
|  | struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); | 
|  | int nr = attr->index; | 
|  | long val; | 
|  | int err; | 
|  |  | 
|  | err = kstrtol(buf, 10, &val); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | mutex_lock(&data->update_lock); | 
|  | data->in_high[nr] = in0_to_reg(val); | 
|  | f71805f_write8(data, F71805F_REG_IN_HIGH(nr), data->in_high[nr]); | 
|  | mutex_unlock(&data->update_lock); | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static ssize_t set_in0_min(struct device *dev, struct device_attribute | 
|  | *devattr, const char *buf, size_t count) | 
|  | { | 
|  | struct f71805f_data *data = dev_get_drvdata(dev); | 
|  | struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); | 
|  | int nr = attr->index; | 
|  | long val; | 
|  | int err; | 
|  |  | 
|  | err = kstrtol(buf, 10, &val); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | mutex_lock(&data->update_lock); | 
|  | data->in_low[nr] = in0_to_reg(val); | 
|  | f71805f_write8(data, F71805F_REG_IN_LOW(nr), data->in_low[nr]); | 
|  | mutex_unlock(&data->update_lock); | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static ssize_t show_in(struct device *dev, struct device_attribute *devattr, | 
|  | char *buf) | 
|  | { | 
|  | struct f71805f_data *data = f71805f_update_device(dev); | 
|  | struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); | 
|  | int nr = attr->index; | 
|  |  | 
|  | return sprintf(buf, "%ld\n", in_from_reg(data->in[nr])); | 
|  | } | 
|  |  | 
|  | static ssize_t show_in_max(struct device *dev, struct device_attribute | 
|  | *devattr, char *buf) | 
|  | { | 
|  | struct f71805f_data *data = f71805f_update_device(dev); | 
|  | struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); | 
|  | int nr = attr->index; | 
|  |  | 
|  | return sprintf(buf, "%ld\n", in_from_reg(data->in_high[nr])); | 
|  | } | 
|  |  | 
|  | static ssize_t show_in_min(struct device *dev, struct device_attribute | 
|  | *devattr, char *buf) | 
|  | { | 
|  | struct f71805f_data *data = f71805f_update_device(dev); | 
|  | struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); | 
|  | int nr = attr->index; | 
|  |  | 
|  | return sprintf(buf, "%ld\n", in_from_reg(data->in_low[nr])); | 
|  | } | 
|  |  | 
|  | static ssize_t set_in_max(struct device *dev, struct device_attribute | 
|  | *devattr, const char *buf, size_t count) | 
|  | { | 
|  | struct f71805f_data *data = dev_get_drvdata(dev); | 
|  | struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); | 
|  | int nr = attr->index; | 
|  | long val; | 
|  | int err; | 
|  |  | 
|  | err = kstrtol(buf, 10, &val); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | mutex_lock(&data->update_lock); | 
|  | data->in_high[nr] = in_to_reg(val); | 
|  | f71805f_write8(data, F71805F_REG_IN_HIGH(nr), data->in_high[nr]); | 
|  | mutex_unlock(&data->update_lock); | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static ssize_t set_in_min(struct device *dev, struct device_attribute | 
|  | *devattr, const char *buf, size_t count) | 
|  | { | 
|  | struct f71805f_data *data = dev_get_drvdata(dev); | 
|  | struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); | 
|  | int nr = attr->index; | 
|  | long val; | 
|  | int err; | 
|  |  | 
|  | err = kstrtol(buf, 10, &val); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | mutex_lock(&data->update_lock); | 
|  | data->in_low[nr] = in_to_reg(val); | 
|  | f71805f_write8(data, F71805F_REG_IN_LOW(nr), data->in_low[nr]); | 
|  | mutex_unlock(&data->update_lock); | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static ssize_t show_fan(struct device *dev, struct device_attribute *devattr, | 
|  | char *buf) | 
|  | { | 
|  | struct f71805f_data *data = f71805f_update_device(dev); | 
|  | struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); | 
|  | int nr = attr->index; | 
|  |  | 
|  | return sprintf(buf, "%ld\n", fan_from_reg(data->fan[nr])); | 
|  | } | 
|  |  | 
|  | static ssize_t show_fan_min(struct device *dev, struct device_attribute | 
|  | *devattr, char *buf) | 
|  | { | 
|  | struct f71805f_data *data = f71805f_update_device(dev); | 
|  | struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); | 
|  | int nr = attr->index; | 
|  |  | 
|  | return sprintf(buf, "%ld\n", fan_from_reg(data->fan_low[nr])); | 
|  | } | 
|  |  | 
|  | static ssize_t show_fan_target(struct device *dev, struct device_attribute | 
|  | *devattr, char *buf) | 
|  | { | 
|  | struct f71805f_data *data = f71805f_update_device(dev); | 
|  | struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); | 
|  | int nr = attr->index; | 
|  |  | 
|  | return sprintf(buf, "%ld\n", fan_from_reg(data->fan_target[nr])); | 
|  | } | 
|  |  | 
|  | static ssize_t set_fan_min(struct device *dev, struct device_attribute | 
|  | *devattr, const char *buf, size_t count) | 
|  | { | 
|  | struct f71805f_data *data = dev_get_drvdata(dev); | 
|  | struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); | 
|  | int nr = attr->index; | 
|  | long val; | 
|  | int err; | 
|  |  | 
|  | err = kstrtol(buf, 10, &val); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | mutex_lock(&data->update_lock); | 
|  | data->fan_low[nr] = fan_to_reg(val); | 
|  | f71805f_write16(data, F71805F_REG_FAN_LOW(nr), data->fan_low[nr]); | 
|  | mutex_unlock(&data->update_lock); | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static ssize_t set_fan_target(struct device *dev, struct device_attribute | 
|  | *devattr, const char *buf, size_t count) | 
|  | { | 
|  | struct f71805f_data *data = dev_get_drvdata(dev); | 
|  | struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); | 
|  | int nr = attr->index; | 
|  | long val; | 
|  | int err; | 
|  |  | 
|  | err = kstrtol(buf, 10, &val); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | mutex_lock(&data->update_lock); | 
|  | data->fan_target[nr] = fan_to_reg(val); | 
|  | f71805f_write16(data, F71805F_REG_FAN_TARGET(nr), | 
|  | data->fan_target[nr]); | 
|  | mutex_unlock(&data->update_lock); | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static ssize_t show_pwm(struct device *dev, struct device_attribute *devattr, | 
|  | char *buf) | 
|  | { | 
|  | struct f71805f_data *data = f71805f_update_device(dev); | 
|  | struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); | 
|  | int nr = attr->index; | 
|  |  | 
|  | return sprintf(buf, "%d\n", (int)data->pwm[nr]); | 
|  | } | 
|  |  | 
|  | static ssize_t show_pwm_enable(struct device *dev, struct device_attribute | 
|  | *devattr, char *buf) | 
|  | { | 
|  | struct f71805f_data *data = f71805f_update_device(dev); | 
|  | struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); | 
|  | int nr = attr->index; | 
|  | int mode; | 
|  |  | 
|  | switch (data->fan_ctrl[nr] & FAN_CTRL_MODE_MASK) { | 
|  | case FAN_CTRL_MODE_SPEED: | 
|  | mode = 3; | 
|  | break; | 
|  | case FAN_CTRL_MODE_TEMPERATURE: | 
|  | mode = 2; | 
|  | break; | 
|  | default: /* MANUAL */ | 
|  | mode = 1; | 
|  | } | 
|  |  | 
|  | return sprintf(buf, "%d\n", mode); | 
|  | } | 
|  |  | 
|  | static ssize_t show_pwm_freq(struct device *dev, struct device_attribute | 
|  | *devattr, char *buf) | 
|  | { | 
|  | struct f71805f_data *data = f71805f_update_device(dev); | 
|  | struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); | 
|  | int nr = attr->index; | 
|  |  | 
|  | return sprintf(buf, "%lu\n", pwm_freq_from_reg(data->pwm_freq[nr])); | 
|  | } | 
|  |  | 
|  | static ssize_t show_pwm_mode(struct device *dev, struct device_attribute | 
|  | *devattr, char *buf) | 
|  | { | 
|  | struct f71805f_data *data = f71805f_update_device(dev); | 
|  | struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); | 
|  | int nr = attr->index; | 
|  |  | 
|  | return sprintf(buf, "%d\n", pwm_mode_from_reg(data->fan_ctrl[nr])); | 
|  | } | 
|  |  | 
|  | static ssize_t set_pwm(struct device *dev, struct device_attribute *devattr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | struct f71805f_data *data = dev_get_drvdata(dev); | 
|  | struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); | 
|  | int nr = attr->index; | 
|  | unsigned long val; | 
|  | int err; | 
|  |  | 
|  | err = kstrtoul(buf, 10, &val); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | if (val > 255) | 
|  | return -EINVAL; | 
|  |  | 
|  | mutex_lock(&data->update_lock); | 
|  | data->pwm[nr] = val; | 
|  | f71805f_write8(data, F71805F_REG_PWM_DUTY(nr), data->pwm[nr]); | 
|  | mutex_unlock(&data->update_lock); | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static struct attribute *f71805f_attr_pwm[]; | 
|  |  | 
|  | static ssize_t set_pwm_enable(struct device *dev, struct device_attribute | 
|  | *devattr, const char *buf, size_t count) | 
|  | { | 
|  | struct f71805f_data *data = dev_get_drvdata(dev); | 
|  | struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); | 
|  | int nr = attr->index; | 
|  | u8 reg; | 
|  | unsigned long val; | 
|  | int err; | 
|  |  | 
|  | err = kstrtoul(buf, 10, &val); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | if (val < 1 || val > 3) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (val > 1) { /* Automatic mode, user can't set PWM value */ | 
|  | if (sysfs_chmod_file(&dev->kobj, f71805f_attr_pwm[nr], | 
|  | S_IRUGO)) | 
|  | dev_dbg(dev, "chmod -w pwm%d failed\n", nr + 1); | 
|  | } | 
|  |  | 
|  | mutex_lock(&data->update_lock); | 
|  | reg = f71805f_read8(data, F71805F_REG_FAN_CTRL(nr)) | 
|  | & ~FAN_CTRL_MODE_MASK; | 
|  | switch (val) { | 
|  | case 1: | 
|  | reg |= FAN_CTRL_MODE_MANUAL; | 
|  | break; | 
|  | case 2: | 
|  | reg |= FAN_CTRL_MODE_TEMPERATURE; | 
|  | break; | 
|  | case 3: | 
|  | reg |= FAN_CTRL_MODE_SPEED; | 
|  | break; | 
|  | } | 
|  | data->fan_ctrl[nr] = reg; | 
|  | f71805f_write8(data, F71805F_REG_FAN_CTRL(nr), reg); | 
|  | mutex_unlock(&data->update_lock); | 
|  |  | 
|  | if (val == 1) { /* Manual mode, user can set PWM value */ | 
|  | if (sysfs_chmod_file(&dev->kobj, f71805f_attr_pwm[nr], | 
|  | S_IRUGO | S_IWUSR)) | 
|  | dev_dbg(dev, "chmod +w pwm%d failed\n", nr + 1); | 
|  | } | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static ssize_t set_pwm_freq(struct device *dev, struct device_attribute | 
|  | *devattr, const char *buf, size_t count) | 
|  | { | 
|  | struct f71805f_data *data = dev_get_drvdata(dev); | 
|  | struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); | 
|  | int nr = attr->index; | 
|  | unsigned long val; | 
|  | int err; | 
|  |  | 
|  | err = kstrtoul(buf, 10, &val); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | mutex_lock(&data->update_lock); | 
|  | data->pwm_freq[nr] = pwm_freq_to_reg(val); | 
|  | f71805f_write8(data, F71805F_REG_PWM_FREQ(nr), data->pwm_freq[nr]); | 
|  | mutex_unlock(&data->update_lock); | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static ssize_t show_pwm_auto_point_temp(struct device *dev, | 
|  | struct device_attribute *devattr, | 
|  | char *buf) | 
|  | { | 
|  | struct f71805f_data *data = dev_get_drvdata(dev); | 
|  | struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); | 
|  | int pwmnr = attr->nr; | 
|  | int apnr = attr->index; | 
|  |  | 
|  | return sprintf(buf, "%ld\n", | 
|  | temp_from_reg(data->auto_points[pwmnr].temp[apnr])); | 
|  | } | 
|  |  | 
|  | static ssize_t set_pwm_auto_point_temp(struct device *dev, | 
|  | struct device_attribute *devattr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | struct f71805f_data *data = dev_get_drvdata(dev); | 
|  | struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); | 
|  | int pwmnr = attr->nr; | 
|  | int apnr = attr->index; | 
|  | unsigned long val; | 
|  | int err; | 
|  |  | 
|  | err = kstrtoul(buf, 10, &val); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | mutex_lock(&data->update_lock); | 
|  | data->auto_points[pwmnr].temp[apnr] = temp_to_reg(val); | 
|  | f71805f_write8(data, F71805F_REG_PWM_AUTO_POINT_TEMP(pwmnr, apnr), | 
|  | data->auto_points[pwmnr].temp[apnr]); | 
|  | mutex_unlock(&data->update_lock); | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static ssize_t show_pwm_auto_point_fan(struct device *dev, | 
|  | struct device_attribute *devattr, | 
|  | char *buf) | 
|  | { | 
|  | struct f71805f_data *data = dev_get_drvdata(dev); | 
|  | struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); | 
|  | int pwmnr = attr->nr; | 
|  | int apnr = attr->index; | 
|  |  | 
|  | return sprintf(buf, "%ld\n", | 
|  | fan_from_reg(data->auto_points[pwmnr].fan[apnr])); | 
|  | } | 
|  |  | 
|  | static ssize_t set_pwm_auto_point_fan(struct device *dev, | 
|  | struct device_attribute *devattr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | struct f71805f_data *data = dev_get_drvdata(dev); | 
|  | struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); | 
|  | int pwmnr = attr->nr; | 
|  | int apnr = attr->index; | 
|  | unsigned long val; | 
|  | int err; | 
|  |  | 
|  | err = kstrtoul(buf, 10, &val); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | mutex_lock(&data->update_lock); | 
|  | data->auto_points[pwmnr].fan[apnr] = fan_to_reg(val); | 
|  | f71805f_write16(data, F71805F_REG_PWM_AUTO_POINT_FAN(pwmnr, apnr), | 
|  | data->auto_points[pwmnr].fan[apnr]); | 
|  | mutex_unlock(&data->update_lock); | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static ssize_t show_temp(struct device *dev, struct device_attribute *devattr, | 
|  | char *buf) | 
|  | { | 
|  | struct f71805f_data *data = f71805f_update_device(dev); | 
|  | struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); | 
|  | int nr = attr->index; | 
|  |  | 
|  | return sprintf(buf, "%ld\n", temp_from_reg(data->temp[nr])); | 
|  | } | 
|  |  | 
|  | static ssize_t show_temp_max(struct device *dev, struct device_attribute | 
|  | *devattr, char *buf) | 
|  | { | 
|  | struct f71805f_data *data = f71805f_update_device(dev); | 
|  | struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); | 
|  | int nr = attr->index; | 
|  |  | 
|  | return sprintf(buf, "%ld\n", temp_from_reg(data->temp_high[nr])); | 
|  | } | 
|  |  | 
|  | static ssize_t show_temp_hyst(struct device *dev, struct device_attribute | 
|  | *devattr, char *buf) | 
|  | { | 
|  | struct f71805f_data *data = f71805f_update_device(dev); | 
|  | struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); | 
|  | int nr = attr->index; | 
|  |  | 
|  | return sprintf(buf, "%ld\n", temp_from_reg(data->temp_hyst[nr])); | 
|  | } | 
|  |  | 
|  | static ssize_t show_temp_type(struct device *dev, struct device_attribute | 
|  | *devattr, char *buf) | 
|  | { | 
|  | struct f71805f_data *data = f71805f_update_device(dev); | 
|  | struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); | 
|  | int nr = attr->index; | 
|  |  | 
|  | /* 3 is diode, 4 is thermistor */ | 
|  | return sprintf(buf, "%u\n", (data->temp_mode & (1 << nr)) ? 3 : 4); | 
|  | } | 
|  |  | 
|  | static ssize_t set_temp_max(struct device *dev, struct device_attribute | 
|  | *devattr, const char *buf, size_t count) | 
|  | { | 
|  | struct f71805f_data *data = dev_get_drvdata(dev); | 
|  | struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); | 
|  | int nr = attr->index; | 
|  | long val; | 
|  | int err; | 
|  |  | 
|  | err = kstrtol(buf, 10, &val); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | mutex_lock(&data->update_lock); | 
|  | data->temp_high[nr] = temp_to_reg(val); | 
|  | f71805f_write8(data, F71805F_REG_TEMP_HIGH(nr), data->temp_high[nr]); | 
|  | mutex_unlock(&data->update_lock); | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static ssize_t set_temp_hyst(struct device *dev, struct device_attribute | 
|  | *devattr, const char *buf, size_t count) | 
|  | { | 
|  | struct f71805f_data *data = dev_get_drvdata(dev); | 
|  | struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); | 
|  | int nr = attr->index; | 
|  | long val; | 
|  | int err; | 
|  |  | 
|  | err = kstrtol(buf, 10, &val); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | mutex_lock(&data->update_lock); | 
|  | data->temp_hyst[nr] = temp_to_reg(val); | 
|  | f71805f_write8(data, F71805F_REG_TEMP_HYST(nr), data->temp_hyst[nr]); | 
|  | mutex_unlock(&data->update_lock); | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static ssize_t alarms_in_show(struct device *dev, struct device_attribute | 
|  | *devattr, char *buf) | 
|  | { | 
|  | struct f71805f_data *data = f71805f_update_device(dev); | 
|  |  | 
|  | return sprintf(buf, "%lu\n", data->alarms & 0x7ff); | 
|  | } | 
|  |  | 
|  | static ssize_t alarms_fan_show(struct device *dev, struct device_attribute | 
|  | *devattr, char *buf) | 
|  | { | 
|  | struct f71805f_data *data = f71805f_update_device(dev); | 
|  |  | 
|  | return sprintf(buf, "%lu\n", (data->alarms >> 16) & 0x07); | 
|  | } | 
|  |  | 
|  | static ssize_t alarms_temp_show(struct device *dev, struct device_attribute | 
|  | *devattr, char *buf) | 
|  | { | 
|  | struct f71805f_data *data = f71805f_update_device(dev); | 
|  |  | 
|  | return sprintf(buf, "%lu\n", (data->alarms >> 11) & 0x07); | 
|  | } | 
|  |  | 
|  | static ssize_t show_alarm(struct device *dev, struct device_attribute | 
|  | *devattr, char *buf) | 
|  | { | 
|  | struct f71805f_data *data = f71805f_update_device(dev); | 
|  | struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); | 
|  | int bitnr = attr->index; | 
|  |  | 
|  | return sprintf(buf, "%lu\n", (data->alarms >> bitnr) & 1); | 
|  | } | 
|  |  | 
|  | static ssize_t name_show(struct device *dev, struct device_attribute | 
|  | *devattr, char *buf) | 
|  | { | 
|  | struct f71805f_data *data = dev_get_drvdata(dev); | 
|  |  | 
|  | return sprintf(buf, "%s\n", data->name); | 
|  | } | 
|  |  | 
|  | static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, show_in0, NULL, 0); | 
|  | static SENSOR_DEVICE_ATTR(in0_max, S_IRUGO | S_IWUSR, | 
|  | show_in0_max, set_in0_max, 0); | 
|  | static SENSOR_DEVICE_ATTR(in0_min, S_IRUGO | S_IWUSR, | 
|  | show_in0_min, set_in0_min, 0); | 
|  | static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, show_in, NULL, 1); | 
|  | static SENSOR_DEVICE_ATTR(in1_max, S_IRUGO | S_IWUSR, | 
|  | show_in_max, set_in_max, 1); | 
|  | static SENSOR_DEVICE_ATTR(in1_min, S_IRUGO | S_IWUSR, | 
|  | show_in_min, set_in_min, 1); | 
|  | static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, show_in, NULL, 2); | 
|  | static SENSOR_DEVICE_ATTR(in2_max, S_IRUGO | S_IWUSR, | 
|  | show_in_max, set_in_max, 2); | 
|  | static SENSOR_DEVICE_ATTR(in2_min, S_IRUGO | S_IWUSR, | 
|  | show_in_min, set_in_min, 2); | 
|  | static SENSOR_DEVICE_ATTR(in3_input, S_IRUGO, show_in, NULL, 3); | 
|  | static SENSOR_DEVICE_ATTR(in3_max, S_IRUGO | S_IWUSR, | 
|  | show_in_max, set_in_max, 3); | 
|  | static SENSOR_DEVICE_ATTR(in3_min, S_IRUGO | S_IWUSR, | 
|  | show_in_min, set_in_min, 3); | 
|  | static SENSOR_DEVICE_ATTR(in4_input, S_IRUGO, show_in, NULL, 4); | 
|  | static SENSOR_DEVICE_ATTR(in4_max, S_IRUGO | S_IWUSR, | 
|  | show_in_max, set_in_max, 4); | 
|  | static SENSOR_DEVICE_ATTR(in4_min, S_IRUGO | S_IWUSR, | 
|  | show_in_min, set_in_min, 4); | 
|  | static SENSOR_DEVICE_ATTR(in5_input, S_IRUGO, show_in, NULL, 5); | 
|  | static SENSOR_DEVICE_ATTR(in5_max, S_IRUGO | S_IWUSR, | 
|  | show_in_max, set_in_max, 5); | 
|  | static SENSOR_DEVICE_ATTR(in5_min, S_IRUGO | S_IWUSR, | 
|  | show_in_min, set_in_min, 5); | 
|  | static SENSOR_DEVICE_ATTR(in6_input, S_IRUGO, show_in, NULL, 6); | 
|  | static SENSOR_DEVICE_ATTR(in6_max, S_IRUGO | S_IWUSR, | 
|  | show_in_max, set_in_max, 6); | 
|  | static SENSOR_DEVICE_ATTR(in6_min, S_IRUGO | S_IWUSR, | 
|  | show_in_min, set_in_min, 6); | 
|  | static SENSOR_DEVICE_ATTR(in7_input, S_IRUGO, show_in, NULL, 7); | 
|  | static SENSOR_DEVICE_ATTR(in7_max, S_IRUGO | S_IWUSR, | 
|  | show_in_max, set_in_max, 7); | 
|  | static SENSOR_DEVICE_ATTR(in7_min, S_IRUGO | S_IWUSR, | 
|  | show_in_min, set_in_min, 7); | 
|  | static SENSOR_DEVICE_ATTR(in8_input, S_IRUGO, show_in, NULL, 8); | 
|  | static SENSOR_DEVICE_ATTR(in8_max, S_IRUGO | S_IWUSR, | 
|  | show_in_max, set_in_max, 8); | 
|  | static SENSOR_DEVICE_ATTR(in8_min, S_IRUGO | S_IWUSR, | 
|  | show_in_min, set_in_min, 8); | 
|  | static SENSOR_DEVICE_ATTR(in9_input, S_IRUGO, show_in0, NULL, 9); | 
|  | static SENSOR_DEVICE_ATTR(in9_max, S_IRUGO | S_IWUSR, | 
|  | show_in0_max, set_in0_max, 9); | 
|  | static SENSOR_DEVICE_ATTR(in9_min, S_IRUGO | S_IWUSR, | 
|  | show_in0_min, set_in0_min, 9); | 
|  | static SENSOR_DEVICE_ATTR(in10_input, S_IRUGO, show_in0, NULL, 10); | 
|  | static SENSOR_DEVICE_ATTR(in10_max, S_IRUGO | S_IWUSR, | 
|  | show_in0_max, set_in0_max, 10); | 
|  | static SENSOR_DEVICE_ATTR(in10_min, S_IRUGO | S_IWUSR, | 
|  | show_in0_min, set_in0_min, 10); | 
|  |  | 
|  | static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0); | 
|  | static SENSOR_DEVICE_ATTR(fan1_min, S_IRUGO | S_IWUSR, | 
|  | show_fan_min, set_fan_min, 0); | 
|  | static SENSOR_DEVICE_ATTR(fan1_target, S_IRUGO | S_IWUSR, | 
|  | show_fan_target, set_fan_target, 0); | 
|  | static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1); | 
|  | static SENSOR_DEVICE_ATTR(fan2_min, S_IRUGO | S_IWUSR, | 
|  | show_fan_min, set_fan_min, 1); | 
|  | static SENSOR_DEVICE_ATTR(fan2_target, S_IRUGO | S_IWUSR, | 
|  | show_fan_target, set_fan_target, 1); | 
|  | static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 2); | 
|  | static SENSOR_DEVICE_ATTR(fan3_min, S_IRUGO | S_IWUSR, | 
|  | show_fan_min, set_fan_min, 2); | 
|  | static SENSOR_DEVICE_ATTR(fan3_target, S_IRUGO | S_IWUSR, | 
|  | show_fan_target, set_fan_target, 2); | 
|  |  | 
|  | static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0); | 
|  | static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO | S_IWUSR, | 
|  | show_temp_max, set_temp_max, 0); | 
|  | static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IRUGO | S_IWUSR, | 
|  | show_temp_hyst, set_temp_hyst, 0); | 
|  | static SENSOR_DEVICE_ATTR(temp1_type, S_IRUGO, show_temp_type, NULL, 0); | 
|  | static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1); | 
|  | static SENSOR_DEVICE_ATTR(temp2_max, S_IRUGO | S_IWUSR, | 
|  | show_temp_max, set_temp_max, 1); | 
|  | static SENSOR_DEVICE_ATTR(temp2_max_hyst, S_IRUGO | S_IWUSR, | 
|  | show_temp_hyst, set_temp_hyst, 1); | 
|  | static SENSOR_DEVICE_ATTR(temp2_type, S_IRUGO, show_temp_type, NULL, 1); | 
|  | static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 2); | 
|  | static SENSOR_DEVICE_ATTR(temp3_max, S_IRUGO | S_IWUSR, | 
|  | show_temp_max, set_temp_max, 2); | 
|  | static SENSOR_DEVICE_ATTR(temp3_max_hyst, S_IRUGO | S_IWUSR, | 
|  | show_temp_hyst, set_temp_hyst, 2); | 
|  | static SENSOR_DEVICE_ATTR(temp3_type, S_IRUGO, show_temp_type, NULL, 2); | 
|  |  | 
|  | /* | 
|  | * pwm (value) files are created read-only, write permission is | 
|  | * then added or removed dynamically as needed | 
|  | */ | 
|  | static SENSOR_DEVICE_ATTR(pwm1, S_IRUGO, show_pwm, set_pwm, 0); | 
|  | static SENSOR_DEVICE_ATTR(pwm1_enable, S_IRUGO | S_IWUSR, | 
|  | show_pwm_enable, set_pwm_enable, 0); | 
|  | static SENSOR_DEVICE_ATTR(pwm1_freq, S_IRUGO | S_IWUSR, | 
|  | show_pwm_freq, set_pwm_freq, 0); | 
|  | static SENSOR_DEVICE_ATTR(pwm1_mode, S_IRUGO, show_pwm_mode, NULL, 0); | 
|  | static SENSOR_DEVICE_ATTR(pwm2, S_IRUGO, show_pwm, set_pwm, 1); | 
|  | static SENSOR_DEVICE_ATTR(pwm2_enable, S_IRUGO | S_IWUSR, | 
|  | show_pwm_enable, set_pwm_enable, 1); | 
|  | static SENSOR_DEVICE_ATTR(pwm2_freq, S_IRUGO | S_IWUSR, | 
|  | show_pwm_freq, set_pwm_freq, 1); | 
|  | static SENSOR_DEVICE_ATTR(pwm2_mode, S_IRUGO, show_pwm_mode, NULL, 1); | 
|  | static SENSOR_DEVICE_ATTR(pwm3, S_IRUGO, show_pwm, set_pwm, 2); | 
|  | static SENSOR_DEVICE_ATTR(pwm3_enable, S_IRUGO | S_IWUSR, | 
|  | show_pwm_enable, set_pwm_enable, 2); | 
|  | static SENSOR_DEVICE_ATTR(pwm3_freq, S_IRUGO | S_IWUSR, | 
|  | show_pwm_freq, set_pwm_freq, 2); | 
|  | static SENSOR_DEVICE_ATTR(pwm3_mode, S_IRUGO, show_pwm_mode, NULL, 2); | 
|  |  | 
|  | static SENSOR_DEVICE_ATTR_2(pwm1_auto_point1_temp, S_IRUGO | S_IWUSR, | 
|  | show_pwm_auto_point_temp, set_pwm_auto_point_temp, | 
|  | 0, 0); | 
|  | static SENSOR_DEVICE_ATTR_2(pwm1_auto_point1_fan, S_IRUGO | S_IWUSR, | 
|  | show_pwm_auto_point_fan, set_pwm_auto_point_fan, | 
|  | 0, 0); | 
|  | static SENSOR_DEVICE_ATTR_2(pwm1_auto_point2_temp, S_IRUGO | S_IWUSR, | 
|  | show_pwm_auto_point_temp, set_pwm_auto_point_temp, | 
|  | 0, 1); | 
|  | static SENSOR_DEVICE_ATTR_2(pwm1_auto_point2_fan, S_IRUGO | S_IWUSR, | 
|  | show_pwm_auto_point_fan, set_pwm_auto_point_fan, | 
|  | 0, 1); | 
|  | static SENSOR_DEVICE_ATTR_2(pwm1_auto_point3_temp, S_IRUGO | S_IWUSR, | 
|  | show_pwm_auto_point_temp, set_pwm_auto_point_temp, | 
|  | 0, 2); | 
|  | static SENSOR_DEVICE_ATTR_2(pwm1_auto_point3_fan, S_IRUGO | S_IWUSR, | 
|  | show_pwm_auto_point_fan, set_pwm_auto_point_fan, | 
|  | 0, 2); | 
|  |  | 
|  | static SENSOR_DEVICE_ATTR_2(pwm2_auto_point1_temp, S_IRUGO | S_IWUSR, | 
|  | show_pwm_auto_point_temp, set_pwm_auto_point_temp, | 
|  | 1, 0); | 
|  | static SENSOR_DEVICE_ATTR_2(pwm2_auto_point1_fan, S_IRUGO | S_IWUSR, | 
|  | show_pwm_auto_point_fan, set_pwm_auto_point_fan, | 
|  | 1, 0); | 
|  | static SENSOR_DEVICE_ATTR_2(pwm2_auto_point2_temp, S_IRUGO | S_IWUSR, | 
|  | show_pwm_auto_point_temp, set_pwm_auto_point_temp, | 
|  | 1, 1); | 
|  | static SENSOR_DEVICE_ATTR_2(pwm2_auto_point2_fan, S_IRUGO | S_IWUSR, | 
|  | show_pwm_auto_point_fan, set_pwm_auto_point_fan, | 
|  | 1, 1); | 
|  | static SENSOR_DEVICE_ATTR_2(pwm2_auto_point3_temp, S_IRUGO | S_IWUSR, | 
|  | show_pwm_auto_point_temp, set_pwm_auto_point_temp, | 
|  | 1, 2); | 
|  | static SENSOR_DEVICE_ATTR_2(pwm2_auto_point3_fan, S_IRUGO | S_IWUSR, | 
|  | show_pwm_auto_point_fan, set_pwm_auto_point_fan, | 
|  | 1, 2); | 
|  |  | 
|  | static SENSOR_DEVICE_ATTR_2(pwm3_auto_point1_temp, S_IRUGO | S_IWUSR, | 
|  | show_pwm_auto_point_temp, set_pwm_auto_point_temp, | 
|  | 2, 0); | 
|  | static SENSOR_DEVICE_ATTR_2(pwm3_auto_point1_fan, S_IRUGO | S_IWUSR, | 
|  | show_pwm_auto_point_fan, set_pwm_auto_point_fan, | 
|  | 2, 0); | 
|  | static SENSOR_DEVICE_ATTR_2(pwm3_auto_point2_temp, S_IRUGO | S_IWUSR, | 
|  | show_pwm_auto_point_temp, set_pwm_auto_point_temp, | 
|  | 2, 1); | 
|  | static SENSOR_DEVICE_ATTR_2(pwm3_auto_point2_fan, S_IRUGO | S_IWUSR, | 
|  | show_pwm_auto_point_fan, set_pwm_auto_point_fan, | 
|  | 2, 1); | 
|  | static SENSOR_DEVICE_ATTR_2(pwm3_auto_point3_temp, S_IRUGO | S_IWUSR, | 
|  | show_pwm_auto_point_temp, set_pwm_auto_point_temp, | 
|  | 2, 2); | 
|  | static SENSOR_DEVICE_ATTR_2(pwm3_auto_point3_fan, S_IRUGO | S_IWUSR, | 
|  | show_pwm_auto_point_fan, set_pwm_auto_point_fan, | 
|  | 2, 2); | 
|  |  | 
|  | static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0); | 
|  | static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1); | 
|  | static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 2); | 
|  | static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 3); | 
|  | static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 4); | 
|  | static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, 5); | 
|  | static SENSOR_DEVICE_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL, 6); | 
|  | static SENSOR_DEVICE_ATTR(in7_alarm, S_IRUGO, show_alarm, NULL, 7); | 
|  | static SENSOR_DEVICE_ATTR(in8_alarm, S_IRUGO, show_alarm, NULL, 8); | 
|  | static SENSOR_DEVICE_ATTR(in9_alarm, S_IRUGO, show_alarm, NULL, 9); | 
|  | static SENSOR_DEVICE_ATTR(in10_alarm, S_IRUGO, show_alarm, NULL, 10); | 
|  | static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 11); | 
|  | static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 12); | 
|  | static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 13); | 
|  | static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 16); | 
|  | static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 17); | 
|  | static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL, 18); | 
|  | static DEVICE_ATTR_RO(alarms_in); | 
|  | static DEVICE_ATTR_RO(alarms_fan); | 
|  | static DEVICE_ATTR_RO(alarms_temp); | 
|  |  | 
|  | static DEVICE_ATTR_RO(name); | 
|  |  | 
|  | static struct attribute *f71805f_attributes[] = { | 
|  | &sensor_dev_attr_in0_input.dev_attr.attr, | 
|  | &sensor_dev_attr_in0_max.dev_attr.attr, | 
|  | &sensor_dev_attr_in0_min.dev_attr.attr, | 
|  | &sensor_dev_attr_in1_input.dev_attr.attr, | 
|  | &sensor_dev_attr_in1_max.dev_attr.attr, | 
|  | &sensor_dev_attr_in1_min.dev_attr.attr, | 
|  | &sensor_dev_attr_in2_input.dev_attr.attr, | 
|  | &sensor_dev_attr_in2_max.dev_attr.attr, | 
|  | &sensor_dev_attr_in2_min.dev_attr.attr, | 
|  | &sensor_dev_attr_in3_input.dev_attr.attr, | 
|  | &sensor_dev_attr_in3_max.dev_attr.attr, | 
|  | &sensor_dev_attr_in3_min.dev_attr.attr, | 
|  | &sensor_dev_attr_in5_input.dev_attr.attr, | 
|  | &sensor_dev_attr_in5_max.dev_attr.attr, | 
|  | &sensor_dev_attr_in5_min.dev_attr.attr, | 
|  | &sensor_dev_attr_in6_input.dev_attr.attr, | 
|  | &sensor_dev_attr_in6_max.dev_attr.attr, | 
|  | &sensor_dev_attr_in6_min.dev_attr.attr, | 
|  | &sensor_dev_attr_in7_input.dev_attr.attr, | 
|  | &sensor_dev_attr_in7_max.dev_attr.attr, | 
|  | &sensor_dev_attr_in7_min.dev_attr.attr, | 
|  |  | 
|  | &sensor_dev_attr_fan1_input.dev_attr.attr, | 
|  | &sensor_dev_attr_fan1_min.dev_attr.attr, | 
|  | &sensor_dev_attr_fan1_alarm.dev_attr.attr, | 
|  | &sensor_dev_attr_fan1_target.dev_attr.attr, | 
|  | &sensor_dev_attr_fan2_input.dev_attr.attr, | 
|  | &sensor_dev_attr_fan2_min.dev_attr.attr, | 
|  | &sensor_dev_attr_fan2_alarm.dev_attr.attr, | 
|  | &sensor_dev_attr_fan2_target.dev_attr.attr, | 
|  | &sensor_dev_attr_fan3_input.dev_attr.attr, | 
|  | &sensor_dev_attr_fan3_min.dev_attr.attr, | 
|  | &sensor_dev_attr_fan3_alarm.dev_attr.attr, | 
|  | &sensor_dev_attr_fan3_target.dev_attr.attr, | 
|  |  | 
|  | &sensor_dev_attr_pwm1.dev_attr.attr, | 
|  | &sensor_dev_attr_pwm1_enable.dev_attr.attr, | 
|  | &sensor_dev_attr_pwm1_mode.dev_attr.attr, | 
|  | &sensor_dev_attr_pwm2.dev_attr.attr, | 
|  | &sensor_dev_attr_pwm2_enable.dev_attr.attr, | 
|  | &sensor_dev_attr_pwm2_mode.dev_attr.attr, | 
|  | &sensor_dev_attr_pwm3.dev_attr.attr, | 
|  | &sensor_dev_attr_pwm3_enable.dev_attr.attr, | 
|  | &sensor_dev_attr_pwm3_mode.dev_attr.attr, | 
|  |  | 
|  | &sensor_dev_attr_temp1_input.dev_attr.attr, | 
|  | &sensor_dev_attr_temp1_max.dev_attr.attr, | 
|  | &sensor_dev_attr_temp1_max_hyst.dev_attr.attr, | 
|  | &sensor_dev_attr_temp1_type.dev_attr.attr, | 
|  | &sensor_dev_attr_temp2_input.dev_attr.attr, | 
|  | &sensor_dev_attr_temp2_max.dev_attr.attr, | 
|  | &sensor_dev_attr_temp2_max_hyst.dev_attr.attr, | 
|  | &sensor_dev_attr_temp2_type.dev_attr.attr, | 
|  | &sensor_dev_attr_temp3_input.dev_attr.attr, | 
|  | &sensor_dev_attr_temp3_max.dev_attr.attr, | 
|  | &sensor_dev_attr_temp3_max_hyst.dev_attr.attr, | 
|  | &sensor_dev_attr_temp3_type.dev_attr.attr, | 
|  |  | 
|  | &sensor_dev_attr_pwm1_auto_point1_temp.dev_attr.attr, | 
|  | &sensor_dev_attr_pwm1_auto_point1_fan.dev_attr.attr, | 
|  | &sensor_dev_attr_pwm1_auto_point2_temp.dev_attr.attr, | 
|  | &sensor_dev_attr_pwm1_auto_point2_fan.dev_attr.attr, | 
|  | &sensor_dev_attr_pwm1_auto_point3_temp.dev_attr.attr, | 
|  | &sensor_dev_attr_pwm1_auto_point3_fan.dev_attr.attr, | 
|  | &sensor_dev_attr_pwm2_auto_point1_temp.dev_attr.attr, | 
|  | &sensor_dev_attr_pwm2_auto_point1_fan.dev_attr.attr, | 
|  | &sensor_dev_attr_pwm2_auto_point2_temp.dev_attr.attr, | 
|  | &sensor_dev_attr_pwm2_auto_point2_fan.dev_attr.attr, | 
|  | &sensor_dev_attr_pwm2_auto_point3_temp.dev_attr.attr, | 
|  | &sensor_dev_attr_pwm2_auto_point3_fan.dev_attr.attr, | 
|  | &sensor_dev_attr_pwm3_auto_point1_temp.dev_attr.attr, | 
|  | &sensor_dev_attr_pwm3_auto_point1_fan.dev_attr.attr, | 
|  | &sensor_dev_attr_pwm3_auto_point2_temp.dev_attr.attr, | 
|  | &sensor_dev_attr_pwm3_auto_point2_fan.dev_attr.attr, | 
|  | &sensor_dev_attr_pwm3_auto_point3_temp.dev_attr.attr, | 
|  | &sensor_dev_attr_pwm3_auto_point3_fan.dev_attr.attr, | 
|  |  | 
|  | &sensor_dev_attr_in0_alarm.dev_attr.attr, | 
|  | &sensor_dev_attr_in1_alarm.dev_attr.attr, | 
|  | &sensor_dev_attr_in2_alarm.dev_attr.attr, | 
|  | &sensor_dev_attr_in3_alarm.dev_attr.attr, | 
|  | &sensor_dev_attr_in5_alarm.dev_attr.attr, | 
|  | &sensor_dev_attr_in6_alarm.dev_attr.attr, | 
|  | &sensor_dev_attr_in7_alarm.dev_attr.attr, | 
|  | &dev_attr_alarms_in.attr, | 
|  | &sensor_dev_attr_temp1_alarm.dev_attr.attr, | 
|  | &sensor_dev_attr_temp2_alarm.dev_attr.attr, | 
|  | &sensor_dev_attr_temp3_alarm.dev_attr.attr, | 
|  | &dev_attr_alarms_temp.attr, | 
|  | &dev_attr_alarms_fan.attr, | 
|  |  | 
|  | &dev_attr_name.attr, | 
|  | NULL | 
|  | }; | 
|  |  | 
|  | static const struct attribute_group f71805f_group = { | 
|  | .attrs = f71805f_attributes, | 
|  | }; | 
|  |  | 
|  | static struct attribute *f71805f_attributes_optin[4][5] = { | 
|  | { | 
|  | &sensor_dev_attr_in4_input.dev_attr.attr, | 
|  | &sensor_dev_attr_in4_max.dev_attr.attr, | 
|  | &sensor_dev_attr_in4_min.dev_attr.attr, | 
|  | &sensor_dev_attr_in4_alarm.dev_attr.attr, | 
|  | NULL | 
|  | }, { | 
|  | &sensor_dev_attr_in8_input.dev_attr.attr, | 
|  | &sensor_dev_attr_in8_max.dev_attr.attr, | 
|  | &sensor_dev_attr_in8_min.dev_attr.attr, | 
|  | &sensor_dev_attr_in8_alarm.dev_attr.attr, | 
|  | NULL | 
|  | }, { | 
|  | &sensor_dev_attr_in9_input.dev_attr.attr, | 
|  | &sensor_dev_attr_in9_max.dev_attr.attr, | 
|  | &sensor_dev_attr_in9_min.dev_attr.attr, | 
|  | &sensor_dev_attr_in9_alarm.dev_attr.attr, | 
|  | NULL | 
|  | }, { | 
|  | &sensor_dev_attr_in10_input.dev_attr.attr, | 
|  | &sensor_dev_attr_in10_max.dev_attr.attr, | 
|  | &sensor_dev_attr_in10_min.dev_attr.attr, | 
|  | &sensor_dev_attr_in10_alarm.dev_attr.attr, | 
|  | NULL | 
|  | } | 
|  | }; | 
|  |  | 
|  | static const struct attribute_group f71805f_group_optin[4] = { | 
|  | { .attrs = f71805f_attributes_optin[0] }, | 
|  | { .attrs = f71805f_attributes_optin[1] }, | 
|  | { .attrs = f71805f_attributes_optin[2] }, | 
|  | { .attrs = f71805f_attributes_optin[3] }, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * We don't include pwm_freq files in the arrays above, because they must be | 
|  | * created conditionally (only if pwm_mode is 1 == PWM) | 
|  | */ | 
|  | static struct attribute *f71805f_attributes_pwm_freq[] = { | 
|  | &sensor_dev_attr_pwm1_freq.dev_attr.attr, | 
|  | &sensor_dev_attr_pwm2_freq.dev_attr.attr, | 
|  | &sensor_dev_attr_pwm3_freq.dev_attr.attr, | 
|  | NULL | 
|  | }; | 
|  |  | 
|  | static const struct attribute_group f71805f_group_pwm_freq = { | 
|  | .attrs = f71805f_attributes_pwm_freq, | 
|  | }; | 
|  |  | 
|  | /* We also need an indexed access to pwmN files to toggle writability */ | 
|  | static struct attribute *f71805f_attr_pwm[] = { | 
|  | &sensor_dev_attr_pwm1.dev_attr.attr, | 
|  | &sensor_dev_attr_pwm2.dev_attr.attr, | 
|  | &sensor_dev_attr_pwm3.dev_attr.attr, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * Device registration and initialization | 
|  | */ | 
|  |  | 
|  | static void f71805f_init_device(struct f71805f_data *data) | 
|  | { | 
|  | u8 reg; | 
|  | int i; | 
|  |  | 
|  | reg = f71805f_read8(data, F71805F_REG_START); | 
|  | if ((reg & 0x41) != 0x01) { | 
|  | pr_debug("Starting monitoring operations\n"); | 
|  | f71805f_write8(data, F71805F_REG_START, (reg | 0x01) & ~0x40); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Fan monitoring can be disabled. If it is, we won't be polling | 
|  | * the register values, and won't create the related sysfs files. | 
|  | */ | 
|  | for (i = 0; i < 3; i++) { | 
|  | data->fan_ctrl[i] = f71805f_read8(data, | 
|  | F71805F_REG_FAN_CTRL(i)); | 
|  | /* | 
|  | * Clear latch full bit, else "speed mode" fan speed control | 
|  | * doesn't work | 
|  | */ | 
|  | if (data->fan_ctrl[i] & FAN_CTRL_LATCH_FULL) { | 
|  | data->fan_ctrl[i] &= ~FAN_CTRL_LATCH_FULL; | 
|  | f71805f_write8(data, F71805F_REG_FAN_CTRL(i), | 
|  | data->fan_ctrl[i]); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static int f71805f_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct f71805f_sio_data *sio_data = dev_get_platdata(&pdev->dev); | 
|  | struct f71805f_data *data; | 
|  | struct resource *res; | 
|  | int i, err; | 
|  |  | 
|  | static const char * const names[] = { | 
|  | "f71805f", | 
|  | "f71872f", | 
|  | }; | 
|  |  | 
|  | data = devm_kzalloc(&pdev->dev, sizeof(struct f71805f_data), | 
|  | GFP_KERNEL); | 
|  | if (!data) | 
|  | return -ENOMEM; | 
|  |  | 
|  | res = platform_get_resource(pdev, IORESOURCE_IO, 0); | 
|  | if (!devm_request_region(&pdev->dev, res->start + ADDR_REG_OFFSET, 2, | 
|  | DRVNAME)) { | 
|  | dev_err(&pdev->dev, "Failed to request region 0x%lx-0x%lx\n", | 
|  | (unsigned long)(res->start + ADDR_REG_OFFSET), | 
|  | (unsigned long)(res->start + ADDR_REG_OFFSET + 1)); | 
|  | return -EBUSY; | 
|  | } | 
|  | data->addr = res->start; | 
|  | data->name = names[sio_data->kind]; | 
|  | mutex_init(&data->update_lock); | 
|  |  | 
|  | platform_set_drvdata(pdev, data); | 
|  |  | 
|  | /* Some voltage inputs depend on chip model and configuration */ | 
|  | switch (sio_data->kind) { | 
|  | case f71805f: | 
|  | data->has_in = 0x1ff; | 
|  | break; | 
|  | case f71872f: | 
|  | data->has_in = 0x6ef; | 
|  | if (sio_data->fnsel1 & 0x01) | 
|  | data->has_in |= (1 << 4); /* in4 */ | 
|  | if (sio_data->fnsel1 & 0x02) | 
|  | data->has_in |= (1 << 8); /* in8 */ | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* Initialize the F71805F chip */ | 
|  | f71805f_init_device(data); | 
|  |  | 
|  | /* Register sysfs interface files */ | 
|  | err = sysfs_create_group(&pdev->dev.kobj, &f71805f_group); | 
|  | if (err) | 
|  | return err; | 
|  | if (data->has_in & (1 << 4)) { /* in4 */ | 
|  | err = sysfs_create_group(&pdev->dev.kobj, | 
|  | &f71805f_group_optin[0]); | 
|  | if (err) | 
|  | goto exit_remove_files; | 
|  | } | 
|  | if (data->has_in & (1 << 8)) { /* in8 */ | 
|  | err = sysfs_create_group(&pdev->dev.kobj, | 
|  | &f71805f_group_optin[1]); | 
|  | if (err) | 
|  | goto exit_remove_files; | 
|  | } | 
|  | if (data->has_in & (1 << 9)) { /* in9 (F71872F/FG only) */ | 
|  | err = sysfs_create_group(&pdev->dev.kobj, | 
|  | &f71805f_group_optin[2]); | 
|  | if (err) | 
|  | goto exit_remove_files; | 
|  | } | 
|  | if (data->has_in & (1 << 10)) { /* in9 (F71872F/FG only) */ | 
|  | err = sysfs_create_group(&pdev->dev.kobj, | 
|  | &f71805f_group_optin[3]); | 
|  | if (err) | 
|  | goto exit_remove_files; | 
|  | } | 
|  | for (i = 0; i < 3; i++) { | 
|  | /* If control mode is PWM, create pwm_freq file */ | 
|  | if (!(data->fan_ctrl[i] & FAN_CTRL_DC_MODE)) { | 
|  | err = sysfs_create_file(&pdev->dev.kobj, | 
|  | f71805f_attributes_pwm_freq[i]); | 
|  | if (err) | 
|  | goto exit_remove_files; | 
|  | } | 
|  | /* If PWM is in manual mode, add write permission */ | 
|  | if (data->fan_ctrl[i] & FAN_CTRL_MODE_MANUAL) { | 
|  | err = sysfs_chmod_file(&pdev->dev.kobj, | 
|  | f71805f_attr_pwm[i], | 
|  | S_IRUGO | S_IWUSR); | 
|  | if (err) { | 
|  | dev_err(&pdev->dev, "chmod +w pwm%d failed\n", | 
|  | i + 1); | 
|  | goto exit_remove_files; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | data->hwmon_dev = hwmon_device_register(&pdev->dev); | 
|  | if (IS_ERR(data->hwmon_dev)) { | 
|  | err = PTR_ERR(data->hwmon_dev); | 
|  | dev_err(&pdev->dev, "Class registration failed (%d)\n", err); | 
|  | goto exit_remove_files; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | exit_remove_files: | 
|  | sysfs_remove_group(&pdev->dev.kobj, &f71805f_group); | 
|  | for (i = 0; i < 4; i++) | 
|  | sysfs_remove_group(&pdev->dev.kobj, &f71805f_group_optin[i]); | 
|  | sysfs_remove_group(&pdev->dev.kobj, &f71805f_group_pwm_freq); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static void f71805f_remove(struct platform_device *pdev) | 
|  | { | 
|  | struct f71805f_data *data = platform_get_drvdata(pdev); | 
|  | int i; | 
|  |  | 
|  | hwmon_device_unregister(data->hwmon_dev); | 
|  | sysfs_remove_group(&pdev->dev.kobj, &f71805f_group); | 
|  | for (i = 0; i < 4; i++) | 
|  | sysfs_remove_group(&pdev->dev.kobj, &f71805f_group_optin[i]); | 
|  | sysfs_remove_group(&pdev->dev.kobj, &f71805f_group_pwm_freq); | 
|  | } | 
|  |  | 
|  | static struct platform_driver f71805f_driver = { | 
|  | .driver = { | 
|  | .name	= DRVNAME, | 
|  | }, | 
|  | .probe		= f71805f_probe, | 
|  | .remove		= f71805f_remove, | 
|  | }; | 
|  |  | 
|  | static int __init f71805f_device_add(unsigned short address, | 
|  | const struct f71805f_sio_data *sio_data) | 
|  | { | 
|  | struct resource res = { | 
|  | .start	= address, | 
|  | .end	= address + REGION_LENGTH - 1, | 
|  | .flags	= IORESOURCE_IO, | 
|  | }; | 
|  | int err; | 
|  |  | 
|  | pdev = platform_device_alloc(DRVNAME, address); | 
|  | if (!pdev) { | 
|  | err = -ENOMEM; | 
|  | pr_err("Device allocation failed\n"); | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | res.name = pdev->name; | 
|  | err = acpi_check_resource_conflict(&res); | 
|  | if (err) | 
|  | goto exit_device_put; | 
|  |  | 
|  | err = platform_device_add_resources(pdev, &res, 1); | 
|  | if (err) { | 
|  | pr_err("Device resource addition failed (%d)\n", err); | 
|  | goto exit_device_put; | 
|  | } | 
|  |  | 
|  | err = platform_device_add_data(pdev, sio_data, | 
|  | sizeof(struct f71805f_sio_data)); | 
|  | if (err) { | 
|  | pr_err("Platform data allocation failed\n"); | 
|  | goto exit_device_put; | 
|  | } | 
|  |  | 
|  | err = platform_device_add(pdev); | 
|  | if (err) { | 
|  | pr_err("Device addition failed (%d)\n", err); | 
|  | goto exit_device_put; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | exit_device_put: | 
|  | platform_device_put(pdev); | 
|  | exit: | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int __init f71805f_find(int sioaddr, unsigned short *address, | 
|  | struct f71805f_sio_data *sio_data) | 
|  | { | 
|  | int err; | 
|  | u16 devid; | 
|  |  | 
|  | static const char * const names[] = { | 
|  | "F71805F/FG", | 
|  | "F71872F/FG or F71806F/FG", | 
|  | }; | 
|  |  | 
|  | err = superio_enter(sioaddr); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | err = -ENODEV; | 
|  | devid = superio_inw(sioaddr, SIO_REG_MANID); | 
|  | if (devid != SIO_FINTEK_ID) | 
|  | goto exit; | 
|  |  | 
|  | devid = force_id ? force_id : superio_inw(sioaddr, SIO_REG_DEVID); | 
|  | switch (devid) { | 
|  | case SIO_F71805F_ID: | 
|  | sio_data->kind = f71805f; | 
|  | break; | 
|  | case SIO_F71872F_ID: | 
|  | sio_data->kind = f71872f; | 
|  | sio_data->fnsel1 = superio_inb(sioaddr, SIO_REG_FNSEL1); | 
|  | break; | 
|  | default: | 
|  | pr_info("Unsupported Fintek device, skipping\n"); | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | superio_select(sioaddr, F71805F_LD_HWM); | 
|  | if (!(superio_inb(sioaddr, SIO_REG_ENABLE) & 0x01)) { | 
|  | pr_warn("Device not activated, skipping\n"); | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | *address = superio_inw(sioaddr, SIO_REG_ADDR); | 
|  | if (*address == 0) { | 
|  | pr_warn("Base address not set, skipping\n"); | 
|  | goto exit; | 
|  | } | 
|  | *address &= ~(REGION_LENGTH - 1);	/* Ignore 3 LSB */ | 
|  |  | 
|  | err = 0; | 
|  | pr_info("Found %s chip at %#x, revision %u\n", | 
|  | names[sio_data->kind], *address, | 
|  | superio_inb(sioaddr, SIO_REG_DEVREV)); | 
|  |  | 
|  | exit: | 
|  | superio_exit(sioaddr); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int __init f71805f_init(void) | 
|  | { | 
|  | int err; | 
|  | unsigned short address; | 
|  | struct f71805f_sio_data sio_data; | 
|  |  | 
|  | if (f71805f_find(0x2e, &address, &sio_data) | 
|  | && f71805f_find(0x4e, &address, &sio_data)) | 
|  | return -ENODEV; | 
|  |  | 
|  | err = platform_driver_register(&f71805f_driver); | 
|  | if (err) | 
|  | goto exit; | 
|  |  | 
|  | /* Sets global pdev as a side effect */ | 
|  | err = f71805f_device_add(address, &sio_data); | 
|  | if (err) | 
|  | goto exit_driver; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | exit_driver: | 
|  | platform_driver_unregister(&f71805f_driver); | 
|  | exit: | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static void __exit f71805f_exit(void) | 
|  | { | 
|  | platform_device_unregister(pdev); | 
|  | platform_driver_unregister(&f71805f_driver); | 
|  | } | 
|  |  | 
|  | MODULE_AUTHOR("Jean Delvare <jdelvare@suse.de>"); | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_DESCRIPTION("F71805F/F71872F hardware monitoring driver"); | 
|  |  | 
|  | module_init(f71805f_init); | 
|  | module_exit(f71805f_exit); |