|  | // SPDX-License-Identifier: GPL-2.0 | 
|  | /* | 
|  | * Simple file system for zoned block devices exposing zones as files. | 
|  | * | 
|  | * Copyright (C) 2022 Western Digital Corporation or its affiliates. | 
|  | */ | 
|  | #include <linux/module.h> | 
|  | #include <linux/pagemap.h> | 
|  | #include <linux/iomap.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/blkdev.h> | 
|  | #include <linux/statfs.h> | 
|  | #include <linux/writeback.h> | 
|  | #include <linux/quotaops.h> | 
|  | #include <linux/seq_file.h> | 
|  | #include <linux/parser.h> | 
|  | #include <linux/uio.h> | 
|  | #include <linux/mman.h> | 
|  | #include <linux/sched/mm.h> | 
|  | #include <linux/task_io_accounting_ops.h> | 
|  |  | 
|  | #include "zonefs.h" | 
|  |  | 
|  | #include "trace.h" | 
|  |  | 
|  | static int zonefs_read_iomap_begin(struct inode *inode, loff_t offset, | 
|  | loff_t length, unsigned int flags, | 
|  | struct iomap *iomap, struct iomap *srcmap) | 
|  | { | 
|  | struct zonefs_inode_info *zi = ZONEFS_I(inode); | 
|  | struct zonefs_zone *z = zonefs_inode_zone(inode); | 
|  | struct super_block *sb = inode->i_sb; | 
|  | loff_t isize; | 
|  |  | 
|  | /* | 
|  | * All blocks are always mapped below EOF. If reading past EOF, | 
|  | * act as if there is a hole up to the file maximum size. | 
|  | */ | 
|  | mutex_lock(&zi->i_truncate_mutex); | 
|  | iomap->bdev = inode->i_sb->s_bdev; | 
|  | iomap->offset = ALIGN_DOWN(offset, sb->s_blocksize); | 
|  | isize = i_size_read(inode); | 
|  | if (iomap->offset >= isize) { | 
|  | iomap->type = IOMAP_HOLE; | 
|  | iomap->addr = IOMAP_NULL_ADDR; | 
|  | iomap->length = length; | 
|  | } else { | 
|  | iomap->type = IOMAP_MAPPED; | 
|  | iomap->addr = (z->z_sector << SECTOR_SHIFT) + iomap->offset; | 
|  | iomap->length = isize - iomap->offset; | 
|  | } | 
|  | mutex_unlock(&zi->i_truncate_mutex); | 
|  |  | 
|  | trace_zonefs_iomap_begin(inode, iomap); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct iomap_ops zonefs_read_iomap_ops = { | 
|  | .iomap_begin	= zonefs_read_iomap_begin, | 
|  | }; | 
|  |  | 
|  | static int zonefs_write_iomap_begin(struct inode *inode, loff_t offset, | 
|  | loff_t length, unsigned int flags, | 
|  | struct iomap *iomap, struct iomap *srcmap) | 
|  | { | 
|  | struct zonefs_inode_info *zi = ZONEFS_I(inode); | 
|  | struct zonefs_zone *z = zonefs_inode_zone(inode); | 
|  | struct super_block *sb = inode->i_sb; | 
|  | loff_t isize; | 
|  |  | 
|  | /* All write I/Os should always be within the file maximum size */ | 
|  | if (WARN_ON_ONCE(offset + length > z->z_capacity)) | 
|  | return -EIO; | 
|  |  | 
|  | /* | 
|  | * Sequential zones can only accept direct writes. This is already | 
|  | * checked when writes are issued, so warn if we see a page writeback | 
|  | * operation. | 
|  | */ | 
|  | if (WARN_ON_ONCE(zonefs_zone_is_seq(z) && !(flags & IOMAP_DIRECT))) | 
|  | return -EIO; | 
|  |  | 
|  | /* | 
|  | * For conventional zones, all blocks are always mapped. For sequential | 
|  | * zones, all blocks after always mapped below the inode size (zone | 
|  | * write pointer) and unwriten beyond. | 
|  | */ | 
|  | mutex_lock(&zi->i_truncate_mutex); | 
|  | iomap->bdev = inode->i_sb->s_bdev; | 
|  | iomap->offset = ALIGN_DOWN(offset, sb->s_blocksize); | 
|  | iomap->addr = (z->z_sector << SECTOR_SHIFT) + iomap->offset; | 
|  | isize = i_size_read(inode); | 
|  | if (iomap->offset >= isize) { | 
|  | iomap->type = IOMAP_UNWRITTEN; | 
|  | iomap->length = z->z_capacity - iomap->offset; | 
|  | } else { | 
|  | iomap->type = IOMAP_MAPPED; | 
|  | iomap->length = isize - iomap->offset; | 
|  | } | 
|  | mutex_unlock(&zi->i_truncate_mutex); | 
|  |  | 
|  | trace_zonefs_iomap_begin(inode, iomap); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct iomap_ops zonefs_write_iomap_ops = { | 
|  | .iomap_begin	= zonefs_write_iomap_begin, | 
|  | }; | 
|  |  | 
|  | static int zonefs_read_folio(struct file *unused, struct folio *folio) | 
|  | { | 
|  | return iomap_read_folio(folio, &zonefs_read_iomap_ops); | 
|  | } | 
|  |  | 
|  | static void zonefs_readahead(struct readahead_control *rac) | 
|  | { | 
|  | iomap_readahead(rac, &zonefs_read_iomap_ops); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Map blocks for page writeback. This is used only on conventional zone files, | 
|  | * which implies that the page range can only be within the fixed inode size. | 
|  | */ | 
|  | static ssize_t zonefs_writeback_range(struct iomap_writepage_ctx *wpc, | 
|  | struct folio *folio, u64 offset, unsigned len, u64 end_pos) | 
|  | { | 
|  | struct zonefs_zone *z = zonefs_inode_zone(wpc->inode); | 
|  |  | 
|  | if (WARN_ON_ONCE(zonefs_zone_is_seq(z))) | 
|  | return -EIO; | 
|  | if (WARN_ON_ONCE(offset >= i_size_read(wpc->inode))) | 
|  | return -EIO; | 
|  |  | 
|  | /* If the mapping is already OK, nothing needs to be done */ | 
|  | if (offset < wpc->iomap.offset || | 
|  | offset >= wpc->iomap.offset + wpc->iomap.length) { | 
|  | int error; | 
|  |  | 
|  | error = zonefs_write_iomap_begin(wpc->inode, offset, | 
|  | z->z_capacity - offset, IOMAP_WRITE, | 
|  | &wpc->iomap, NULL); | 
|  | if (error) | 
|  | return error; | 
|  | } | 
|  |  | 
|  | return iomap_add_to_ioend(wpc, folio, offset, end_pos, len); | 
|  | } | 
|  |  | 
|  | static const struct iomap_writeback_ops zonefs_writeback_ops = { | 
|  | .writeback_range	= zonefs_writeback_range, | 
|  | .writeback_submit	= iomap_ioend_writeback_submit, | 
|  | }; | 
|  |  | 
|  | static int zonefs_writepages(struct address_space *mapping, | 
|  | struct writeback_control *wbc) | 
|  | { | 
|  | struct iomap_writepage_ctx wpc = { | 
|  | .inode		= mapping->host, | 
|  | .wbc		= wbc, | 
|  | .ops		= &zonefs_writeback_ops, | 
|  | }; | 
|  |  | 
|  | return iomap_writepages(&wpc); | 
|  | } | 
|  |  | 
|  | static int zonefs_swap_activate(struct swap_info_struct *sis, | 
|  | struct file *swap_file, sector_t *span) | 
|  | { | 
|  | struct inode *inode = file_inode(swap_file); | 
|  |  | 
|  | if (zonefs_inode_is_seq(inode)) { | 
|  | zonefs_err(inode->i_sb, | 
|  | "swap file: not a conventional zone file\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | return iomap_swapfile_activate(sis, swap_file, span, | 
|  | &zonefs_read_iomap_ops); | 
|  | } | 
|  |  | 
|  | const struct address_space_operations zonefs_file_aops = { | 
|  | .read_folio		= zonefs_read_folio, | 
|  | .readahead		= zonefs_readahead, | 
|  | .writepages		= zonefs_writepages, | 
|  | .dirty_folio		= iomap_dirty_folio, | 
|  | .release_folio		= iomap_release_folio, | 
|  | .invalidate_folio	= iomap_invalidate_folio, | 
|  | .migrate_folio		= filemap_migrate_folio, | 
|  | .is_partially_uptodate	= iomap_is_partially_uptodate, | 
|  | .error_remove_folio	= generic_error_remove_folio, | 
|  | .swap_activate		= zonefs_swap_activate, | 
|  | }; | 
|  |  | 
|  | int zonefs_file_truncate(struct inode *inode, loff_t isize) | 
|  | { | 
|  | struct zonefs_inode_info *zi = ZONEFS_I(inode); | 
|  | struct zonefs_zone *z = zonefs_inode_zone(inode); | 
|  | loff_t old_isize; | 
|  | enum req_op op; | 
|  | int ret = 0; | 
|  |  | 
|  | /* | 
|  | * Only sequential zone files can be truncated and truncation is allowed | 
|  | * only down to a 0 size, which is equivalent to a zone reset, and to | 
|  | * the maximum file size, which is equivalent to a zone finish. | 
|  | */ | 
|  | if (!zonefs_zone_is_seq(z)) | 
|  | return -EPERM; | 
|  |  | 
|  | if (!isize) | 
|  | op = REQ_OP_ZONE_RESET; | 
|  | else if (isize == z->z_capacity) | 
|  | op = REQ_OP_ZONE_FINISH; | 
|  | else | 
|  | return -EPERM; | 
|  |  | 
|  | inode_dio_wait(inode); | 
|  |  | 
|  | /* Serialize against page faults */ | 
|  | filemap_invalidate_lock(inode->i_mapping); | 
|  |  | 
|  | /* Serialize against zonefs_iomap_begin() */ | 
|  | mutex_lock(&zi->i_truncate_mutex); | 
|  |  | 
|  | old_isize = i_size_read(inode); | 
|  | if (isize == old_isize) | 
|  | goto unlock; | 
|  |  | 
|  | ret = zonefs_inode_zone_mgmt(inode, op); | 
|  | if (ret) | 
|  | goto unlock; | 
|  |  | 
|  | /* | 
|  | * If the mount option ZONEFS_MNTOPT_EXPLICIT_OPEN is set, | 
|  | * take care of open zones. | 
|  | */ | 
|  | if (z->z_flags & ZONEFS_ZONE_OPEN) { | 
|  | /* | 
|  | * Truncating a zone to EMPTY or FULL is the equivalent of | 
|  | * closing the zone. For a truncation to 0, we need to | 
|  | * re-open the zone to ensure new writes can be processed. | 
|  | * For a truncation to the maximum file size, the zone is | 
|  | * closed and writes cannot be accepted anymore, so clear | 
|  | * the open flag. | 
|  | */ | 
|  | if (!isize) | 
|  | ret = zonefs_inode_zone_mgmt(inode, REQ_OP_ZONE_OPEN); | 
|  | else | 
|  | z->z_flags &= ~ZONEFS_ZONE_OPEN; | 
|  | } | 
|  |  | 
|  | zonefs_update_stats(inode, isize); | 
|  | truncate_setsize(inode, isize); | 
|  | z->z_wpoffset = isize; | 
|  | zonefs_inode_account_active(inode); | 
|  |  | 
|  | unlock: | 
|  | mutex_unlock(&zi->i_truncate_mutex); | 
|  | filemap_invalidate_unlock(inode->i_mapping); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int zonefs_file_fsync(struct file *file, loff_t start, loff_t end, | 
|  | int datasync) | 
|  | { | 
|  | struct inode *inode = file_inode(file); | 
|  | int ret = 0; | 
|  |  | 
|  | if (unlikely(IS_IMMUTABLE(inode))) | 
|  | return -EPERM; | 
|  |  | 
|  | /* | 
|  | * Since only direct writes are allowed in sequential files, page cache | 
|  | * flush is needed only for conventional zone files. | 
|  | */ | 
|  | if (zonefs_inode_is_cnv(inode)) | 
|  | ret = file_write_and_wait_range(file, start, end); | 
|  | if (!ret) | 
|  | ret = blkdev_issue_flush(inode->i_sb->s_bdev); | 
|  |  | 
|  | if (ret) | 
|  | zonefs_io_error(inode, true); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static vm_fault_t zonefs_filemap_page_mkwrite(struct vm_fault *vmf) | 
|  | { | 
|  | struct inode *inode = file_inode(vmf->vma->vm_file); | 
|  | vm_fault_t ret; | 
|  |  | 
|  | if (unlikely(IS_IMMUTABLE(inode))) | 
|  | return VM_FAULT_SIGBUS; | 
|  |  | 
|  | /* | 
|  | * Sanity check: only conventional zone files can have shared | 
|  | * writeable mappings. | 
|  | */ | 
|  | if (zonefs_inode_is_seq(inode)) | 
|  | return VM_FAULT_NOPAGE; | 
|  |  | 
|  | sb_start_pagefault(inode->i_sb); | 
|  | file_update_time(vmf->vma->vm_file); | 
|  |  | 
|  | /* Serialize against truncates */ | 
|  | filemap_invalidate_lock_shared(inode->i_mapping); | 
|  | ret = iomap_page_mkwrite(vmf, &zonefs_write_iomap_ops, NULL); | 
|  | filemap_invalidate_unlock_shared(inode->i_mapping); | 
|  |  | 
|  | sb_end_pagefault(inode->i_sb); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static const struct vm_operations_struct zonefs_file_vm_ops = { | 
|  | .fault		= filemap_fault, | 
|  | .map_pages	= filemap_map_pages, | 
|  | .page_mkwrite	= zonefs_filemap_page_mkwrite, | 
|  | }; | 
|  |  | 
|  | static int zonefs_file_mmap_prepare(struct vm_area_desc *desc) | 
|  | { | 
|  | struct file *file = desc->file; | 
|  |  | 
|  | /* | 
|  | * Conventional zones accept random writes, so their files can support | 
|  | * shared writable mappings. For sequential zone files, only read | 
|  | * mappings are possible since there are no guarantees for write | 
|  | * ordering between msync() and page cache writeback. | 
|  | */ | 
|  | if (zonefs_inode_is_seq(file_inode(file)) && | 
|  | (desc->vm_flags & VM_SHARED) && (desc->vm_flags & VM_MAYWRITE)) | 
|  | return -EINVAL; | 
|  |  | 
|  | file_accessed(file); | 
|  | desc->vm_ops = &zonefs_file_vm_ops; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static loff_t zonefs_file_llseek(struct file *file, loff_t offset, int whence) | 
|  | { | 
|  | loff_t isize = i_size_read(file_inode(file)); | 
|  |  | 
|  | /* | 
|  | * Seeks are limited to below the zone size for conventional zones | 
|  | * and below the zone write pointer for sequential zones. In both | 
|  | * cases, this limit is the inode size. | 
|  | */ | 
|  | return generic_file_llseek_size(file, offset, whence, isize, isize); | 
|  | } | 
|  |  | 
|  | static int zonefs_file_write_dio_end_io(struct kiocb *iocb, ssize_t size, | 
|  | int error, unsigned int flags) | 
|  | { | 
|  | struct inode *inode = file_inode(iocb->ki_filp); | 
|  | struct zonefs_inode_info *zi = ZONEFS_I(inode); | 
|  |  | 
|  | if (error) { | 
|  | /* | 
|  | * For Sync IOs, error recovery is called from | 
|  | * zonefs_file_dio_write(). | 
|  | */ | 
|  | if (!is_sync_kiocb(iocb)) | 
|  | zonefs_io_error(inode, true); | 
|  | return error; | 
|  | } | 
|  |  | 
|  | if (size && zonefs_inode_is_seq(inode)) { | 
|  | /* | 
|  | * Note that we may be seeing completions out of order, | 
|  | * but that is not a problem since a write completed | 
|  | * successfully necessarily means that all preceding writes | 
|  | * were also successful. So we can safely increase the inode | 
|  | * size to the write end location. | 
|  | */ | 
|  | mutex_lock(&zi->i_truncate_mutex); | 
|  | if (i_size_read(inode) < iocb->ki_pos + size) { | 
|  | zonefs_update_stats(inode, iocb->ki_pos + size); | 
|  | zonefs_i_size_write(inode, iocb->ki_pos + size); | 
|  | } | 
|  | mutex_unlock(&zi->i_truncate_mutex); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct iomap_dio_ops zonefs_write_dio_ops = { | 
|  | .end_io		= zonefs_file_write_dio_end_io, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * Do not exceed the LFS limits nor the file zone size. If pos is under the | 
|  | * limit it becomes a short access. If it exceeds the limit, return -EFBIG. | 
|  | */ | 
|  | static loff_t zonefs_write_check_limits(struct file *file, loff_t pos, | 
|  | loff_t count) | 
|  | { | 
|  | struct inode *inode = file_inode(file); | 
|  | struct zonefs_zone *z = zonefs_inode_zone(inode); | 
|  | loff_t limit = rlimit(RLIMIT_FSIZE); | 
|  | loff_t max_size = z->z_capacity; | 
|  |  | 
|  | if (limit != RLIM_INFINITY) { | 
|  | if (pos >= limit) { | 
|  | send_sig(SIGXFSZ, current, 0); | 
|  | return -EFBIG; | 
|  | } | 
|  | count = min(count, limit - pos); | 
|  | } | 
|  |  | 
|  | if (!(file->f_flags & O_LARGEFILE)) | 
|  | max_size = min_t(loff_t, MAX_NON_LFS, max_size); | 
|  |  | 
|  | if (unlikely(pos >= max_size)) | 
|  | return -EFBIG; | 
|  |  | 
|  | return min(count, max_size - pos); | 
|  | } | 
|  |  | 
|  | static ssize_t zonefs_write_checks(struct kiocb *iocb, struct iov_iter *from) | 
|  | { | 
|  | struct file *file = iocb->ki_filp; | 
|  | struct inode *inode = file_inode(file); | 
|  | struct zonefs_inode_info *zi = ZONEFS_I(inode); | 
|  | struct zonefs_zone *z = zonefs_inode_zone(inode); | 
|  | loff_t count; | 
|  |  | 
|  | if (IS_SWAPFILE(inode)) | 
|  | return -ETXTBSY; | 
|  |  | 
|  | if (!iov_iter_count(from)) | 
|  | return 0; | 
|  |  | 
|  | if ((iocb->ki_flags & IOCB_NOWAIT) && !(iocb->ki_flags & IOCB_DIRECT)) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (iocb->ki_flags & IOCB_APPEND) { | 
|  | if (zonefs_zone_is_cnv(z)) | 
|  | return -EINVAL; | 
|  | mutex_lock(&zi->i_truncate_mutex); | 
|  | iocb->ki_pos = z->z_wpoffset; | 
|  | mutex_unlock(&zi->i_truncate_mutex); | 
|  | } | 
|  |  | 
|  | count = zonefs_write_check_limits(file, iocb->ki_pos, | 
|  | iov_iter_count(from)); | 
|  | if (count < 0) | 
|  | return count; | 
|  |  | 
|  | iov_iter_truncate(from, count); | 
|  | return iov_iter_count(from); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Handle direct writes. For sequential zone files, this is the only possible | 
|  | * write path. For these files, check that the user is issuing writes | 
|  | * sequentially from the end of the file. This code assumes that the block layer | 
|  | * delivers write requests to the device in sequential order. This is always the | 
|  | * case if a block IO scheduler implementing the ELEVATOR_F_ZBD_SEQ_WRITE | 
|  | * elevator feature is being used (e.g. mq-deadline). The block layer always | 
|  | * automatically select such an elevator for zoned block devices during the | 
|  | * device initialization. | 
|  | */ | 
|  | static ssize_t zonefs_file_dio_write(struct kiocb *iocb, struct iov_iter *from) | 
|  | { | 
|  | struct inode *inode = file_inode(iocb->ki_filp); | 
|  | struct zonefs_inode_info *zi = ZONEFS_I(inode); | 
|  | struct zonefs_zone *z = zonefs_inode_zone(inode); | 
|  | struct super_block *sb = inode->i_sb; | 
|  | ssize_t ret, count; | 
|  |  | 
|  | /* | 
|  | * For async direct IOs to sequential zone files, refuse IOCB_NOWAIT | 
|  | * as this can cause write reordering (e.g. the first aio gets EAGAIN | 
|  | * on the inode lock but the second goes through but is now unaligned). | 
|  | */ | 
|  | if (zonefs_zone_is_seq(z) && !is_sync_kiocb(iocb) && | 
|  | (iocb->ki_flags & IOCB_NOWAIT)) | 
|  | return -EOPNOTSUPP; | 
|  |  | 
|  | if (iocb->ki_flags & IOCB_NOWAIT) { | 
|  | if (!inode_trylock(inode)) | 
|  | return -EAGAIN; | 
|  | } else { | 
|  | inode_lock(inode); | 
|  | } | 
|  |  | 
|  | count = zonefs_write_checks(iocb, from); | 
|  | if (count <= 0) { | 
|  | ret = count; | 
|  | goto inode_unlock; | 
|  | } | 
|  |  | 
|  | if ((iocb->ki_pos | count) & (sb->s_blocksize - 1)) { | 
|  | ret = -EINVAL; | 
|  | goto inode_unlock; | 
|  | } | 
|  |  | 
|  | /* Enforce sequential writes (append only) in sequential zones */ | 
|  | if (zonefs_zone_is_seq(z)) { | 
|  | mutex_lock(&zi->i_truncate_mutex); | 
|  | if (iocb->ki_pos != z->z_wpoffset) { | 
|  | mutex_unlock(&zi->i_truncate_mutex); | 
|  | ret = -EINVAL; | 
|  | goto inode_unlock; | 
|  | } | 
|  | /* | 
|  | * Advance the zone write pointer offset. This assumes that the | 
|  | * IO will succeed, which is OK to do because we do not allow | 
|  | * partial writes (IOMAP_DIO_PARTIAL is not set) and if the IO | 
|  | * fails, the error path will correct the write pointer offset. | 
|  | */ | 
|  | z->z_wpoffset += count; | 
|  | zonefs_inode_account_active(inode); | 
|  | mutex_unlock(&zi->i_truncate_mutex); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * iomap_dio_rw() may return ENOTBLK if there was an issue with | 
|  | * page invalidation. Overwrite that error code with EBUSY so that | 
|  | * the user can make sense of the error. | 
|  | */ | 
|  | ret = iomap_dio_rw(iocb, from, &zonefs_write_iomap_ops, | 
|  | &zonefs_write_dio_ops, 0, NULL, 0); | 
|  | if (ret == -ENOTBLK) | 
|  | ret = -EBUSY; | 
|  |  | 
|  | /* | 
|  | * For a failed IO or partial completion, trigger error recovery | 
|  | * to update the zone write pointer offset to a correct value. | 
|  | * For asynchronous IOs, zonefs_file_write_dio_end_io() may already | 
|  | * have executed error recovery if the IO already completed when we | 
|  | * reach here. However, we cannot know that and execute error recovery | 
|  | * again (that will not change anything). | 
|  | */ | 
|  | if (zonefs_zone_is_seq(z)) { | 
|  | if (ret > 0 && ret != count) | 
|  | ret = -EIO; | 
|  | if (ret < 0 && ret != -EIOCBQUEUED) | 
|  | zonefs_io_error(inode, true); | 
|  | } | 
|  |  | 
|  | inode_unlock: | 
|  | inode_unlock(inode); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static ssize_t zonefs_file_buffered_write(struct kiocb *iocb, | 
|  | struct iov_iter *from) | 
|  | { | 
|  | struct inode *inode = file_inode(iocb->ki_filp); | 
|  | ssize_t ret; | 
|  |  | 
|  | /* | 
|  | * Direct IO writes are mandatory for sequential zone files so that the | 
|  | * write IO issuing order is preserved. | 
|  | */ | 
|  | if (zonefs_inode_is_seq(inode)) | 
|  | return -EIO; | 
|  |  | 
|  | if (iocb->ki_flags & IOCB_NOWAIT) { | 
|  | if (!inode_trylock(inode)) | 
|  | return -EAGAIN; | 
|  | } else { | 
|  | inode_lock(inode); | 
|  | } | 
|  |  | 
|  | ret = zonefs_write_checks(iocb, from); | 
|  | if (ret <= 0) | 
|  | goto inode_unlock; | 
|  |  | 
|  | ret = iomap_file_buffered_write(iocb, from, &zonefs_write_iomap_ops, | 
|  | NULL, NULL); | 
|  | if (ret == -EIO) | 
|  | zonefs_io_error(inode, true); | 
|  |  | 
|  | inode_unlock: | 
|  | inode_unlock(inode); | 
|  | if (ret > 0) | 
|  | ret = generic_write_sync(iocb, ret); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static ssize_t zonefs_file_write_iter(struct kiocb *iocb, struct iov_iter *from) | 
|  | { | 
|  | struct inode *inode = file_inode(iocb->ki_filp); | 
|  | struct zonefs_zone *z = zonefs_inode_zone(inode); | 
|  |  | 
|  | if (unlikely(IS_IMMUTABLE(inode))) | 
|  | return -EPERM; | 
|  |  | 
|  | if (sb_rdonly(inode->i_sb)) | 
|  | return -EROFS; | 
|  |  | 
|  | /* Write operations beyond the zone capacity are not allowed */ | 
|  | if (iocb->ki_pos >= z->z_capacity) | 
|  | return -EFBIG; | 
|  |  | 
|  | if (iocb->ki_flags & IOCB_DIRECT) { | 
|  | ssize_t ret = zonefs_file_dio_write(iocb, from); | 
|  |  | 
|  | if (ret != -ENOTBLK) | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | return zonefs_file_buffered_write(iocb, from); | 
|  | } | 
|  |  | 
|  | static int zonefs_file_read_dio_end_io(struct kiocb *iocb, ssize_t size, | 
|  | int error, unsigned int flags) | 
|  | { | 
|  | if (error) { | 
|  | zonefs_io_error(file_inode(iocb->ki_filp), false); | 
|  | return error; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct iomap_dio_ops zonefs_read_dio_ops = { | 
|  | .end_io			= zonefs_file_read_dio_end_io, | 
|  | }; | 
|  |  | 
|  | static ssize_t zonefs_file_read_iter(struct kiocb *iocb, struct iov_iter *to) | 
|  | { | 
|  | struct inode *inode = file_inode(iocb->ki_filp); | 
|  | struct zonefs_inode_info *zi = ZONEFS_I(inode); | 
|  | struct zonefs_zone *z = zonefs_inode_zone(inode); | 
|  | struct super_block *sb = inode->i_sb; | 
|  | loff_t isize; | 
|  | ssize_t ret; | 
|  |  | 
|  | /* Offline zones cannot be read */ | 
|  | if (unlikely(IS_IMMUTABLE(inode) && !(inode->i_mode & 0777))) | 
|  | return -EPERM; | 
|  |  | 
|  | if (iocb->ki_pos >= z->z_capacity) | 
|  | return 0; | 
|  |  | 
|  | if (iocb->ki_flags & IOCB_NOWAIT) { | 
|  | if (!inode_trylock_shared(inode)) | 
|  | return -EAGAIN; | 
|  | } else { | 
|  | inode_lock_shared(inode); | 
|  | } | 
|  |  | 
|  | /* Limit read operations to written data */ | 
|  | mutex_lock(&zi->i_truncate_mutex); | 
|  | isize = i_size_read(inode); | 
|  | if (iocb->ki_pos >= isize) { | 
|  | mutex_unlock(&zi->i_truncate_mutex); | 
|  | ret = 0; | 
|  | goto inode_unlock; | 
|  | } | 
|  | iov_iter_truncate(to, isize - iocb->ki_pos); | 
|  | mutex_unlock(&zi->i_truncate_mutex); | 
|  |  | 
|  | if (iocb->ki_flags & IOCB_DIRECT) { | 
|  | size_t count = iov_iter_count(to); | 
|  |  | 
|  | if ((iocb->ki_pos | count) & (sb->s_blocksize - 1)) { | 
|  | ret = -EINVAL; | 
|  | goto inode_unlock; | 
|  | } | 
|  | file_accessed(iocb->ki_filp); | 
|  | ret = iomap_dio_rw(iocb, to, &zonefs_read_iomap_ops, | 
|  | &zonefs_read_dio_ops, 0, NULL, 0); | 
|  | } else { | 
|  | ret = generic_file_read_iter(iocb, to); | 
|  | if (ret == -EIO) | 
|  | zonefs_io_error(inode, false); | 
|  | } | 
|  |  | 
|  | inode_unlock: | 
|  | inode_unlock_shared(inode); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static ssize_t zonefs_file_splice_read(struct file *in, loff_t *ppos, | 
|  | struct pipe_inode_info *pipe, | 
|  | size_t len, unsigned int flags) | 
|  | { | 
|  | struct inode *inode = file_inode(in); | 
|  | struct zonefs_inode_info *zi = ZONEFS_I(inode); | 
|  | struct zonefs_zone *z = zonefs_inode_zone(inode); | 
|  | loff_t isize; | 
|  | ssize_t ret = 0; | 
|  |  | 
|  | /* Offline zones cannot be read */ | 
|  | if (unlikely(IS_IMMUTABLE(inode) && !(inode->i_mode & 0777))) | 
|  | return -EPERM; | 
|  |  | 
|  | if (*ppos >= z->z_capacity) | 
|  | return 0; | 
|  |  | 
|  | inode_lock_shared(inode); | 
|  |  | 
|  | /* Limit read operations to written data */ | 
|  | mutex_lock(&zi->i_truncate_mutex); | 
|  | isize = i_size_read(inode); | 
|  | if (*ppos >= isize) | 
|  | len = 0; | 
|  | else | 
|  | len = min_t(loff_t, len, isize - *ppos); | 
|  | mutex_unlock(&zi->i_truncate_mutex); | 
|  |  | 
|  | if (len > 0) { | 
|  | ret = filemap_splice_read(in, ppos, pipe, len, flags); | 
|  | if (ret == -EIO) | 
|  | zonefs_io_error(inode, false); | 
|  | } | 
|  |  | 
|  | inode_unlock_shared(inode); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Write open accounting is done only for sequential files. | 
|  | */ | 
|  | static inline bool zonefs_seq_file_need_wro(struct inode *inode, | 
|  | struct file *file) | 
|  | { | 
|  | if (zonefs_inode_is_cnv(inode)) | 
|  | return false; | 
|  |  | 
|  | if (!(file->f_mode & FMODE_WRITE)) | 
|  | return false; | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | static int zonefs_seq_file_write_open(struct inode *inode) | 
|  | { | 
|  | struct zonefs_inode_info *zi = ZONEFS_I(inode); | 
|  | struct zonefs_zone *z = zonefs_inode_zone(inode); | 
|  | int ret = 0; | 
|  |  | 
|  | mutex_lock(&zi->i_truncate_mutex); | 
|  |  | 
|  | if (!zi->i_wr_refcnt) { | 
|  | struct zonefs_sb_info *sbi = ZONEFS_SB(inode->i_sb); | 
|  | unsigned int wro = atomic_inc_return(&sbi->s_wro_seq_files); | 
|  |  | 
|  | if (sbi->s_mount_opts & ZONEFS_MNTOPT_EXPLICIT_OPEN) { | 
|  |  | 
|  | if (sbi->s_max_wro_seq_files | 
|  | && wro > sbi->s_max_wro_seq_files) { | 
|  | atomic_dec(&sbi->s_wro_seq_files); | 
|  | ret = -EBUSY; | 
|  | goto unlock; | 
|  | } | 
|  |  | 
|  | if (i_size_read(inode) < z->z_capacity) { | 
|  | ret = zonefs_inode_zone_mgmt(inode, | 
|  | REQ_OP_ZONE_OPEN); | 
|  | if (ret) { | 
|  | atomic_dec(&sbi->s_wro_seq_files); | 
|  | goto unlock; | 
|  | } | 
|  | z->z_flags |= ZONEFS_ZONE_OPEN; | 
|  | zonefs_inode_account_active(inode); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | zi->i_wr_refcnt++; | 
|  |  | 
|  | unlock: | 
|  | mutex_unlock(&zi->i_truncate_mutex); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int zonefs_file_open(struct inode *inode, struct file *file) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | file->f_mode |= FMODE_CAN_ODIRECT; | 
|  | ret = generic_file_open(inode, file); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | if (zonefs_seq_file_need_wro(inode, file)) | 
|  | return zonefs_seq_file_write_open(inode); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void zonefs_seq_file_write_close(struct inode *inode) | 
|  | { | 
|  | struct zonefs_inode_info *zi = ZONEFS_I(inode); | 
|  | struct zonefs_zone *z = zonefs_inode_zone(inode); | 
|  | struct super_block *sb = inode->i_sb; | 
|  | struct zonefs_sb_info *sbi = ZONEFS_SB(sb); | 
|  | int ret = 0; | 
|  |  | 
|  | mutex_lock(&zi->i_truncate_mutex); | 
|  |  | 
|  | zi->i_wr_refcnt--; | 
|  | if (zi->i_wr_refcnt) | 
|  | goto unlock; | 
|  |  | 
|  | /* | 
|  | * The file zone may not be open anymore (e.g. the file was truncated to | 
|  | * its maximum size or it was fully written). For this case, we only | 
|  | * need to decrement the write open count. | 
|  | */ | 
|  | if (z->z_flags & ZONEFS_ZONE_OPEN) { | 
|  | ret = zonefs_inode_zone_mgmt(inode, REQ_OP_ZONE_CLOSE); | 
|  | if (ret) { | 
|  | __zonefs_io_error(inode, false); | 
|  | /* | 
|  | * Leaving zones explicitly open may lead to a state | 
|  | * where most zones cannot be written (zone resources | 
|  | * exhausted). So take preventive action by remounting | 
|  | * read-only. | 
|  | */ | 
|  | if (z->z_flags & ZONEFS_ZONE_OPEN && | 
|  | !(sb->s_flags & SB_RDONLY)) { | 
|  | zonefs_warn(sb, | 
|  | "closing zone at %llu failed %d\n", | 
|  | z->z_sector, ret); | 
|  | zonefs_warn(sb, | 
|  | "remounting filesystem read-only\n"); | 
|  | sb->s_flags |= SB_RDONLY; | 
|  | } | 
|  | goto unlock; | 
|  | } | 
|  |  | 
|  | z->z_flags &= ~ZONEFS_ZONE_OPEN; | 
|  | zonefs_inode_account_active(inode); | 
|  | } | 
|  |  | 
|  | atomic_dec(&sbi->s_wro_seq_files); | 
|  |  | 
|  | unlock: | 
|  | mutex_unlock(&zi->i_truncate_mutex); | 
|  | } | 
|  |  | 
|  | static int zonefs_file_release(struct inode *inode, struct file *file) | 
|  | { | 
|  | /* | 
|  | * If we explicitly open a zone we must close it again as well, but the | 
|  | * zone management operation can fail (either due to an IO error or as | 
|  | * the zone has gone offline or read-only). Make sure we don't fail the | 
|  | * close(2) for user-space. | 
|  | */ | 
|  | if (zonefs_seq_file_need_wro(inode, file)) | 
|  | zonefs_seq_file_write_close(inode); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | const struct file_operations zonefs_file_operations = { | 
|  | .open		= zonefs_file_open, | 
|  | .release	= zonefs_file_release, | 
|  | .fsync		= zonefs_file_fsync, | 
|  | .mmap_prepare	= zonefs_file_mmap_prepare, | 
|  | .llseek		= zonefs_file_llseek, | 
|  | .read_iter	= zonefs_file_read_iter, | 
|  | .write_iter	= zonefs_file_write_iter, | 
|  | .splice_read	= zonefs_file_splice_read, | 
|  | .splice_write	= iter_file_splice_write, | 
|  | .iopoll		= iocb_bio_iopoll, | 
|  | }; |