| // SPDX-License-Identifier: GPL-2.0+ | 
 | // | 
 | // soc-ac97.c  --  ALSA SoC Audio Layer AC97 support | 
 | // | 
 | // Copyright 2005 Wolfson Microelectronics PLC. | 
 | // Copyright 2005 Openedhand Ltd. | 
 | // Copyright (C) 2010 Slimlogic Ltd. | 
 | // Copyright (C) 2010 Texas Instruments Inc. | 
 | // | 
 | // Author: Liam Girdwood <lrg@slimlogic.co.uk> | 
 | //         with code, comments and ideas from :- | 
 | //         Richard Purdie <richard@openedhand.com> | 
 |  | 
 | #include <linux/ctype.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/export.h> | 
 | #include <linux/gpio/consumer.h> | 
 | #include <linux/gpio/driver.h> | 
 | #include <linux/init.h> | 
 | #include <linux/of.h> | 
 | #include <linux/pinctrl/consumer.h> | 
 | #include <linux/slab.h> | 
 | #include <sound/ac97_codec.h> | 
 | #include <sound/soc.h> | 
 |  | 
 | struct snd_ac97_reset_cfg { | 
 | 	struct pinctrl *pctl; | 
 | 	struct pinctrl_state *pstate_reset; | 
 | 	struct pinctrl_state *pstate_warm_reset; | 
 | 	struct pinctrl_state *pstate_run; | 
 | 	struct gpio_desc *reset_gpio; | 
 | 	struct gpio_desc *sdata_gpio; | 
 | 	struct gpio_desc *sync_gpio; | 
 | }; | 
 |  | 
 | static struct snd_ac97_bus soc_ac97_bus = { | 
 | 	.ops = NULL, /* Gets initialized in snd_soc_set_ac97_ops() */ | 
 | }; | 
 |  | 
 | static void soc_ac97_device_release(struct device *dev) | 
 | { | 
 | 	kfree(to_ac97_t(dev)); | 
 | } | 
 |  | 
 | #ifdef CONFIG_GPIOLIB | 
 | struct snd_ac97_gpio_priv { | 
 | 	struct gpio_chip gpio_chip; | 
 | 	unsigned int gpios_set; | 
 | 	struct snd_soc_component *component; | 
 | }; | 
 |  | 
 | static inline struct snd_soc_component *gpio_to_component(struct gpio_chip *chip) | 
 | { | 
 | 	struct snd_ac97_gpio_priv *gpio_priv = gpiochip_get_data(chip); | 
 |  | 
 | 	return gpio_priv->component; | 
 | } | 
 |  | 
 | static int snd_soc_ac97_gpio_request(struct gpio_chip *chip, unsigned int offset) | 
 | { | 
 | 	if (offset >= AC97_NUM_GPIOS) | 
 | 		return -EINVAL; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int snd_soc_ac97_gpio_direction_in(struct gpio_chip *chip, | 
 | 					  unsigned int offset) | 
 | { | 
 | 	struct snd_soc_component *component = gpio_to_component(chip); | 
 |  | 
 | 	dev_dbg(component->dev, "set gpio %d to output\n", offset); | 
 | 	return snd_soc_component_update_bits(component, AC97_GPIO_CFG, | 
 | 				   1 << offset, 1 << offset); | 
 | } | 
 |  | 
 | static int snd_soc_ac97_gpio_get(struct gpio_chip *chip, unsigned int offset) | 
 | { | 
 | 	struct snd_soc_component *component = gpio_to_component(chip); | 
 | 	int ret; | 
 |  | 
 | 	ret = snd_soc_component_read(component, AC97_GPIO_STATUS); | 
 |  | 
 | 	dev_dbg(component->dev, "get gpio %d : %d\n", offset, | 
 | 		ret & (1 << offset)); | 
 |  | 
 | 	return !!(ret & (1 << offset)); | 
 | } | 
 |  | 
 | static int snd_soc_ac97_gpio_set(struct gpio_chip *chip, unsigned int offset, | 
 | 				 int value) | 
 | { | 
 | 	struct snd_ac97_gpio_priv *gpio_priv = gpiochip_get_data(chip); | 
 | 	struct snd_soc_component *component = gpio_to_component(chip); | 
 |  | 
 | 	gpio_priv->gpios_set &= ~(1 << offset); | 
 | 	gpio_priv->gpios_set |= (!!value) << offset; | 
 | 	snd_soc_component_write(component, AC97_GPIO_STATUS, | 
 | 				gpio_priv->gpios_set); | 
 | 	dev_dbg(component->dev, "set gpio %d to %d\n", offset, !!value); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int snd_soc_ac97_gpio_direction_out(struct gpio_chip *chip, | 
 | 				     unsigned offset, int value) | 
 | { | 
 | 	struct snd_soc_component *component = gpio_to_component(chip); | 
 | 	int ret; | 
 |  | 
 | 	dev_dbg(component->dev, "set gpio %d to output\n", offset); | 
 |  | 
 | 	ret = snd_soc_ac97_gpio_set(chip, offset, value); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	return snd_soc_component_update_bits(component, AC97_GPIO_CFG, | 
 | 					     1 << offset, 0); | 
 | } | 
 |  | 
 | static const struct gpio_chip snd_soc_ac97_gpio_chip = { | 
 | 	.label			= "snd_soc_ac97", | 
 | 	.owner			= THIS_MODULE, | 
 | 	.request		= snd_soc_ac97_gpio_request, | 
 | 	.direction_input	= snd_soc_ac97_gpio_direction_in, | 
 | 	.get			= snd_soc_ac97_gpio_get, | 
 | 	.direction_output	= snd_soc_ac97_gpio_direction_out, | 
 | 	.set			= snd_soc_ac97_gpio_set, | 
 | 	.can_sleep		= 1, | 
 | }; | 
 |  | 
 | static int snd_soc_ac97_init_gpio(struct snd_ac97 *ac97, | 
 | 				  struct snd_soc_component *component) | 
 | { | 
 | 	struct snd_ac97_gpio_priv *gpio_priv; | 
 | 	int ret; | 
 |  | 
 | 	gpio_priv = devm_kzalloc(component->dev, sizeof(*gpio_priv), GFP_KERNEL); | 
 | 	if (!gpio_priv) | 
 | 		return -ENOMEM; | 
 | 	ac97->gpio_priv = gpio_priv; | 
 | 	gpio_priv->component = component; | 
 | 	gpio_priv->gpio_chip = snd_soc_ac97_gpio_chip; | 
 | 	gpio_priv->gpio_chip.ngpio = AC97_NUM_GPIOS; | 
 | 	gpio_priv->gpio_chip.parent = component->dev; | 
 | 	gpio_priv->gpio_chip.base = -1; | 
 |  | 
 | 	ret = gpiochip_add_data(&gpio_priv->gpio_chip, gpio_priv); | 
 | 	if (ret != 0) | 
 | 		dev_err(component->dev, "Failed to add GPIOs: %d\n", ret); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static void snd_soc_ac97_free_gpio(struct snd_ac97 *ac97) | 
 | { | 
 | 	gpiochip_remove(&ac97->gpio_priv->gpio_chip); | 
 | } | 
 | #else | 
 | static int snd_soc_ac97_init_gpio(struct snd_ac97 *ac97, | 
 | 				  struct snd_soc_component *component) | 
 | { | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void snd_soc_ac97_free_gpio(struct snd_ac97 *ac97) | 
 | { | 
 | } | 
 | #endif | 
 |  | 
 | /** | 
 |  * snd_soc_alloc_ac97_component() - Allocate new a AC'97 device | 
 |  * @component: The COMPONENT for which to create the AC'97 device | 
 |  * | 
 |  * Allocated a new snd_ac97 device and intializes it, but does not yet register | 
 |  * it. The caller is responsible to either call device_add(&ac97->dev) to | 
 |  * register the device, or to call put_device(&ac97->dev) to free the device. | 
 |  * | 
 |  * Returns: A snd_ac97 device or an ERR_PTR in case of an error. | 
 |  */ | 
 | struct snd_ac97 *snd_soc_alloc_ac97_component(struct snd_soc_component *component) | 
 | { | 
 | 	struct snd_ac97 *ac97; | 
 |  | 
 | 	ac97 = kzalloc(sizeof(struct snd_ac97), GFP_KERNEL); | 
 | 	if (ac97 == NULL) | 
 | 		return ERR_PTR(-ENOMEM); | 
 |  | 
 | 	ac97->bus = &soc_ac97_bus; | 
 | 	ac97->num = 0; | 
 |  | 
 | 	ac97->dev.bus = &ac97_bus_type; | 
 | 	ac97->dev.parent = component->card->dev; | 
 | 	ac97->dev.release = soc_ac97_device_release; | 
 |  | 
 | 	dev_set_name(&ac97->dev, "%d-%d:%s", | 
 | 		     component->card->snd_card->number, 0, | 
 | 		     component->name); | 
 |  | 
 | 	device_initialize(&ac97->dev); | 
 |  | 
 | 	return ac97; | 
 | } | 
 | EXPORT_SYMBOL(snd_soc_alloc_ac97_component); | 
 |  | 
 | /** | 
 |  * snd_soc_new_ac97_component - initailise AC97 device | 
 |  * @component: audio component | 
 |  * @id: The expected device ID | 
 |  * @id_mask: Mask that is applied to the device ID before comparing with @id | 
 |  * | 
 |  * Initialises AC97 component resources for use by ad-hoc devices only. | 
 |  * | 
 |  * If @id is not 0 this function will reset the device, then read the ID from | 
 |  * the device and check if it matches the expected ID. If it doesn't match an | 
 |  * error will be returned and device will not be registered. | 
 |  * | 
 |  * Returns: An ERR_PTR on failure or a valid snd_ac97 struct on success. | 
 |  */ | 
 | struct snd_ac97 *snd_soc_new_ac97_component(struct snd_soc_component *component, | 
 | 	unsigned int id, unsigned int id_mask) | 
 | { | 
 | 	struct snd_ac97 *ac97; | 
 | 	int ret; | 
 |  | 
 | 	ac97 = snd_soc_alloc_ac97_component(component); | 
 | 	if (IS_ERR(ac97)) | 
 | 		return ac97; | 
 |  | 
 | 	if (id) { | 
 | 		ret = snd_ac97_reset(ac97, false, id, id_mask); | 
 | 		if (ret < 0) { | 
 | 			dev_err(component->dev, "Failed to reset AC97 device: %d\n", | 
 | 				ret); | 
 | 			goto err_put_device; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	ret = device_add(&ac97->dev); | 
 | 	if (ret) | 
 | 		goto err_put_device; | 
 |  | 
 | 	ret = snd_soc_ac97_init_gpio(ac97, component); | 
 | 	if (ret) | 
 | 		goto err_put_device; | 
 |  | 
 | 	return ac97; | 
 |  | 
 | err_put_device: | 
 | 	put_device(&ac97->dev); | 
 | 	return ERR_PTR(ret); | 
 | } | 
 | EXPORT_SYMBOL_GPL(snd_soc_new_ac97_component); | 
 |  | 
 | /** | 
 |  * snd_soc_free_ac97_component - free AC97 component device | 
 |  * @ac97: snd_ac97 device to be freed | 
 |  * | 
 |  * Frees AC97 component device resources. | 
 |  */ | 
 | void snd_soc_free_ac97_component(struct snd_ac97 *ac97) | 
 | { | 
 | 	snd_soc_ac97_free_gpio(ac97); | 
 | 	device_del(&ac97->dev); | 
 | 	ac97->bus = NULL; | 
 | 	put_device(&ac97->dev); | 
 | } | 
 | EXPORT_SYMBOL_GPL(snd_soc_free_ac97_component); | 
 |  | 
 | static struct snd_ac97_reset_cfg snd_ac97_rst_cfg; | 
 |  | 
 | static void snd_soc_ac97_warm_reset(struct snd_ac97 *ac97) | 
 | { | 
 | 	struct pinctrl *pctl = snd_ac97_rst_cfg.pctl; | 
 |  | 
 | 	pinctrl_select_state(pctl, snd_ac97_rst_cfg.pstate_warm_reset); | 
 |  | 
 | 	gpiod_direction_output_raw(snd_ac97_rst_cfg.sync_gpio, 1); | 
 |  | 
 | 	udelay(10); | 
 |  | 
 | 	gpiod_direction_output_raw(snd_ac97_rst_cfg.sync_gpio, 0); | 
 |  | 
 | 	pinctrl_select_state(pctl, snd_ac97_rst_cfg.pstate_run); | 
 | 	msleep(2); | 
 | } | 
 |  | 
 | static void snd_soc_ac97_reset(struct snd_ac97 *ac97) | 
 | { | 
 | 	struct pinctrl *pctl = snd_ac97_rst_cfg.pctl; | 
 |  | 
 | 	pinctrl_select_state(pctl, snd_ac97_rst_cfg.pstate_reset); | 
 |  | 
 | 	gpiod_direction_output_raw(snd_ac97_rst_cfg.sync_gpio, 0); | 
 | 	gpiod_direction_output_raw(snd_ac97_rst_cfg.sdata_gpio, 0); | 
 | 	gpiod_direction_output_raw(snd_ac97_rst_cfg.reset_gpio, 0); | 
 |  | 
 | 	udelay(10); | 
 |  | 
 | 	gpiod_direction_output_raw(snd_ac97_rst_cfg.reset_gpio, 1); | 
 |  | 
 | 	pinctrl_select_state(pctl, snd_ac97_rst_cfg.pstate_run); | 
 | 	msleep(2); | 
 | } | 
 |  | 
 | static int snd_soc_ac97_parse_pinctl(struct device *dev, | 
 | 		struct snd_ac97_reset_cfg *cfg) | 
 | { | 
 | 	struct pinctrl *p; | 
 | 	struct pinctrl_state *state; | 
 |  | 
 | 	p = devm_pinctrl_get(dev); | 
 | 	if (IS_ERR(p)) { | 
 | 		dev_err(dev, "Failed to get pinctrl\n"); | 
 | 		return PTR_ERR(p); | 
 | 	} | 
 | 	cfg->pctl = p; | 
 |  | 
 | 	state = pinctrl_lookup_state(p, "ac97-reset"); | 
 | 	if (IS_ERR(state)) { | 
 | 		dev_err(dev, "Can't find pinctrl state ac97-reset\n"); | 
 | 		return PTR_ERR(state); | 
 | 	} | 
 | 	cfg->pstate_reset = state; | 
 |  | 
 | 	state = pinctrl_lookup_state(p, "ac97-warm-reset"); | 
 | 	if (IS_ERR(state)) { | 
 | 		dev_err(dev, "Can't find pinctrl state ac97-warm-reset\n"); | 
 | 		return PTR_ERR(state); | 
 | 	} | 
 | 	cfg->pstate_warm_reset = state; | 
 |  | 
 | 	state = pinctrl_lookup_state(p, "ac97-running"); | 
 | 	if (IS_ERR(state)) { | 
 | 		dev_err(dev, "Can't find pinctrl state ac97-running\n"); | 
 | 		return PTR_ERR(state); | 
 | 	} | 
 | 	cfg->pstate_run = state; | 
 |  | 
 | 	cfg->sync_gpio = devm_gpiod_get_index(dev, "ac97", 0, GPIOD_ASIS); | 
 | 	if (IS_ERR(cfg->sync_gpio)) | 
 | 		return dev_err_probe(dev, PTR_ERR(cfg->sync_gpio), "Can't find ac97-sync gpio\n"); | 
 | 	gpiod_set_consumer_name(cfg->sync_gpio, "AC97 link sync"); | 
 |  | 
 | 	cfg->sdata_gpio = devm_gpiod_get_index(dev, "ac97", 1, GPIOD_ASIS); | 
 | 	if (IS_ERR(cfg->sdata_gpio)) | 
 | 		return dev_err_probe(dev, PTR_ERR(cfg->sdata_gpio), "Can't find ac97-sdata gpio\n"); | 
 | 	gpiod_set_consumer_name(cfg->sdata_gpio, "AC97 link sdata"); | 
 |  | 
 | 	cfg->reset_gpio = devm_gpiod_get_index(dev, "ac97", 2, GPIOD_ASIS); | 
 | 	if (IS_ERR(cfg->reset_gpio)) | 
 | 		return dev_err_probe(dev, PTR_ERR(cfg->reset_gpio), "Can't find ac97-reset gpio\n"); | 
 | 	gpiod_set_consumer_name(cfg->reset_gpio, "AC97 link reset"); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | struct snd_ac97_bus_ops *soc_ac97_ops; | 
 | EXPORT_SYMBOL_GPL(soc_ac97_ops); | 
 |  | 
 | int snd_soc_set_ac97_ops(struct snd_ac97_bus_ops *ops) | 
 | { | 
 | 	if (ops == soc_ac97_ops) | 
 | 		return 0; | 
 |  | 
 | 	if (soc_ac97_ops && ops) | 
 | 		return -EBUSY; | 
 |  | 
 | 	soc_ac97_ops = ops; | 
 | 	soc_ac97_bus.ops = ops; | 
 |  | 
 | 	return 0; | 
 | } | 
 | EXPORT_SYMBOL_GPL(snd_soc_set_ac97_ops); | 
 |  | 
 | /** | 
 |  * snd_soc_set_ac97_ops_of_reset - Set ac97 ops with generic ac97 reset functions | 
 |  * @ops: bus ops | 
 |  * @pdev: platform device | 
 |  * | 
 |  * This function sets the reset and warm_reset properties of ops and parses | 
 |  * the device node of pdev to get pinctrl states and gpio numbers to use. | 
 |  */ | 
 | int snd_soc_set_ac97_ops_of_reset(struct snd_ac97_bus_ops *ops, | 
 | 		struct platform_device *pdev) | 
 | { | 
 | 	struct device *dev = &pdev->dev; | 
 | 	struct snd_ac97_reset_cfg cfg; | 
 | 	int ret; | 
 |  | 
 | 	ret = snd_soc_ac97_parse_pinctl(dev, &cfg); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	ret = snd_soc_set_ac97_ops(ops); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	ops->warm_reset = snd_soc_ac97_warm_reset; | 
 | 	ops->reset = snd_soc_ac97_reset; | 
 |  | 
 | 	snd_ac97_rst_cfg = cfg; | 
 | 	return 0; | 
 | } | 
 | EXPORT_SYMBOL_GPL(snd_soc_set_ac97_ops_of_reset); |