|  | // SPDX-License-Identifier: GPL-2.0-or-later | 
|  | /* | 
|  | * Driver for the OV5645 camera sensor. | 
|  | * | 
|  | * Copyright (c) 2011-2015, The Linux Foundation. All rights reserved. | 
|  | * Copyright (C) 2015 By Tech Design S.L. All Rights Reserved. | 
|  | * Copyright (C) 2012-2013 Freescale Semiconductor, Inc. All Rights Reserved. | 
|  | * | 
|  | * Based on: | 
|  | * - the OV5645 driver from QC msm-3.10 kernel on codeaurora.org: | 
|  | *   https://us.codeaurora.org/cgit/quic/la/kernel/msm-3.10/tree/drivers/ | 
|  | *       media/platform/msm/camera_v2/sensor/ov5645.c?h=LA.BR.1.2.4_rb1.41 | 
|  | * - the OV5640 driver posted on linux-media: | 
|  | *   https://www.mail-archive.com/linux-media%40vger.kernel.org/msg92671.html | 
|  | */ | 
|  |  | 
|  | #include <linux/bitops.h> | 
|  | #include <linux/clk.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/device.h> | 
|  | #include <linux/gpio/consumer.h> | 
|  | #include <linux/i2c.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/of.h> | 
|  | #include <linux/of_graph.h> | 
|  | #include <linux/pm_runtime.h> | 
|  | #include <linux/regulator/consumer.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/types.h> | 
|  | #include <media/v4l2-ctrls.h> | 
|  | #include <media/v4l2-fwnode.h> | 
|  | #include <media/v4l2-subdev.h> | 
|  |  | 
|  | #define OV5645_SYSTEM_CTRL0		0x3008 | 
|  | #define		OV5645_SYSTEM_CTRL0_START	0x02 | 
|  | #define		OV5645_SYSTEM_CTRL0_STOP	0x42 | 
|  | #define OV5645_CHIP_ID_HIGH		0x300a | 
|  | #define		OV5645_CHIP_ID_HIGH_BYTE	0x56 | 
|  | #define OV5645_CHIP_ID_LOW		0x300b | 
|  | #define		OV5645_CHIP_ID_LOW_BYTE		0x45 | 
|  | #define OV5645_IO_MIPI_CTRL00		0x300e | 
|  | #define OV5645_PAD_OUTPUT00		0x3019 | 
|  | #define OV5645_AWB_MANUAL_CONTROL	0x3406 | 
|  | #define		OV5645_AWB_MANUAL_ENABLE	BIT(0) | 
|  | #define OV5645_AEC_PK_MANUAL		0x3503 | 
|  | #define		OV5645_AEC_MANUAL_ENABLE	BIT(0) | 
|  | #define		OV5645_AGC_MANUAL_ENABLE	BIT(1) | 
|  | #define OV5645_TIMING_TC_REG20		0x3820 | 
|  | #define		OV5645_SENSOR_VFLIP		BIT(1) | 
|  | #define		OV5645_ISP_VFLIP		BIT(2) | 
|  | #define OV5645_TIMING_TC_REG21		0x3821 | 
|  | #define		OV5645_SENSOR_MIRROR		BIT(1) | 
|  | #define OV5645_MIPI_CTRL00		0x4800 | 
|  | #define OV5645_PRE_ISP_TEST_SETTING_1	0x503d | 
|  | #define		OV5645_TEST_PATTERN_MASK	0x3 | 
|  | #define		OV5645_SET_TEST_PATTERN(x)	((x) & OV5645_TEST_PATTERN_MASK) | 
|  | #define		OV5645_TEST_PATTERN_ENABLE	BIT(7) | 
|  | #define OV5645_SDE_SAT_U		0x5583 | 
|  | #define OV5645_SDE_SAT_V		0x5584 | 
|  |  | 
|  | /* regulator supplies */ | 
|  | static const char * const ov5645_supply_name[] = { | 
|  | "vdddo", /* Digital I/O (1.8V) supply */ | 
|  | "vdda",  /* Analog (2.8V) supply */ | 
|  | "vddd",  /* Digital Core (1.5V) supply */ | 
|  | }; | 
|  |  | 
|  | #define OV5645_NUM_SUPPLIES ARRAY_SIZE(ov5645_supply_name) | 
|  |  | 
|  | struct reg_value { | 
|  | u16 reg; | 
|  | u8 val; | 
|  | }; | 
|  |  | 
|  | struct ov5645_mode_info { | 
|  | u32 width; | 
|  | u32 height; | 
|  | const struct reg_value *data; | 
|  | u32 data_size; | 
|  | u32 pixel_clock; | 
|  | u32 link_freq; | 
|  | }; | 
|  |  | 
|  | struct ov5645 { | 
|  | struct i2c_client *i2c_client; | 
|  | struct device *dev; | 
|  | struct v4l2_subdev sd; | 
|  | struct media_pad pad; | 
|  | struct v4l2_fwnode_endpoint ep; | 
|  | struct v4l2_rect crop; | 
|  | struct clk *xclk; | 
|  |  | 
|  | struct regulator_bulk_data supplies[OV5645_NUM_SUPPLIES]; | 
|  |  | 
|  | const struct ov5645_mode_info *current_mode; | 
|  |  | 
|  | struct v4l2_ctrl_handler ctrls; | 
|  | struct v4l2_ctrl *pixel_clock; | 
|  | struct v4l2_ctrl *link_freq; | 
|  |  | 
|  | /* Cached register values */ | 
|  | u8 aec_pk_manual; | 
|  | u8 timing_tc_reg20; | 
|  | u8 timing_tc_reg21; | 
|  |  | 
|  | struct gpio_desc *enable_gpio; | 
|  | struct gpio_desc *rst_gpio; | 
|  | }; | 
|  |  | 
|  | static inline struct ov5645 *to_ov5645(struct v4l2_subdev *sd) | 
|  | { | 
|  | return container_of(sd, struct ov5645, sd); | 
|  | } | 
|  |  | 
|  | static const struct reg_value ov5645_global_init_setting[] = { | 
|  | { 0x3103, 0x11 }, | 
|  | { 0x3008, 0x42 }, | 
|  | { 0x3103, 0x03 }, | 
|  | { 0x3503, 0x07 }, | 
|  | { 0x3002, 0x1c }, | 
|  | { 0x3006, 0xc3 }, | 
|  | { 0x3017, 0x00 }, | 
|  | { 0x3018, 0x00 }, | 
|  | { 0x302e, 0x0b }, | 
|  | { 0x3037, 0x13 }, | 
|  | { 0x3108, 0x01 }, | 
|  | { 0x3611, 0x06 }, | 
|  | { 0x3500, 0x00 }, | 
|  | { 0x3501, 0x01 }, | 
|  | { 0x3502, 0x00 }, | 
|  | { 0x350a, 0x00 }, | 
|  | { 0x350b, 0x3f }, | 
|  | { 0x3620, 0x33 }, | 
|  | { 0x3621, 0xe0 }, | 
|  | { 0x3622, 0x01 }, | 
|  | { 0x3630, 0x2e }, | 
|  | { 0x3631, 0x00 }, | 
|  | { 0x3632, 0x32 }, | 
|  | { 0x3633, 0x52 }, | 
|  | { 0x3634, 0x70 }, | 
|  | { 0x3635, 0x13 }, | 
|  | { 0x3636, 0x03 }, | 
|  | { 0x3703, 0x5a }, | 
|  | { 0x3704, 0xa0 }, | 
|  | { 0x3705, 0x1a }, | 
|  | { 0x3709, 0x12 }, | 
|  | { 0x370b, 0x61 }, | 
|  | { 0x370f, 0x10 }, | 
|  | { 0x3715, 0x78 }, | 
|  | { 0x3717, 0x01 }, | 
|  | { 0x371b, 0x20 }, | 
|  | { 0x3731, 0x12 }, | 
|  | { 0x3901, 0x0a }, | 
|  | { 0x3905, 0x02 }, | 
|  | { 0x3906, 0x10 }, | 
|  | { 0x3719, 0x86 }, | 
|  | { 0x3810, 0x00 }, | 
|  | { 0x3811, 0x10 }, | 
|  | { 0x3812, 0x00 }, | 
|  | { 0x3821, 0x01 }, | 
|  | { 0x3824, 0x01 }, | 
|  | { 0x3826, 0x03 }, | 
|  | { 0x3828, 0x08 }, | 
|  | { 0x3a19, 0xf8 }, | 
|  | { 0x3c01, 0x34 }, | 
|  | { 0x3c04, 0x28 }, | 
|  | { 0x3c05, 0x98 }, | 
|  | { 0x3c07, 0x07 }, | 
|  | { 0x3c09, 0xc2 }, | 
|  | { 0x3c0a, 0x9c }, | 
|  | { 0x3c0b, 0x40 }, | 
|  | { 0x3c01, 0x34 }, | 
|  | { 0x4001, 0x02 }, | 
|  | { 0x4514, 0x00 }, | 
|  | { 0x4520, 0xb0 }, | 
|  | { 0x460b, 0x37 }, | 
|  | { 0x460c, 0x20 }, | 
|  | { 0x4818, 0x01 }, | 
|  | { 0x481d, 0xf0 }, | 
|  | { 0x481f, 0x50 }, | 
|  | { 0x4823, 0x70 }, | 
|  | { 0x4831, 0x14 }, | 
|  | { 0x5000, 0xa7 }, | 
|  | { 0x5001, 0x83 }, | 
|  | { 0x501d, 0x00 }, | 
|  | { 0x501f, 0x00 }, | 
|  | { 0x503d, 0x00 }, | 
|  | { 0x505c, 0x30 }, | 
|  | { 0x5181, 0x59 }, | 
|  | { 0x5183, 0x00 }, | 
|  | { 0x5191, 0xf0 }, | 
|  | { 0x5192, 0x03 }, | 
|  | { 0x5684, 0x10 }, | 
|  | { 0x5685, 0xa0 }, | 
|  | { 0x5686, 0x0c }, | 
|  | { 0x5687, 0x78 }, | 
|  | { 0x5a00, 0x08 }, | 
|  | { 0x5a21, 0x00 }, | 
|  | { 0x5a24, 0x00 }, | 
|  | { 0x3008, 0x02 }, | 
|  | { 0x3503, 0x00 }, | 
|  | { 0x5180, 0xff }, | 
|  | { 0x5181, 0xf2 }, | 
|  | { 0x5182, 0x00 }, | 
|  | { 0x5183, 0x14 }, | 
|  | { 0x5184, 0x25 }, | 
|  | { 0x5185, 0x24 }, | 
|  | { 0x5186, 0x09 }, | 
|  | { 0x5187, 0x09 }, | 
|  | { 0x5188, 0x0a }, | 
|  | { 0x5189, 0x75 }, | 
|  | { 0x518a, 0x52 }, | 
|  | { 0x518b, 0xea }, | 
|  | { 0x518c, 0xa8 }, | 
|  | { 0x518d, 0x42 }, | 
|  | { 0x518e, 0x38 }, | 
|  | { 0x518f, 0x56 }, | 
|  | { 0x5190, 0x42 }, | 
|  | { 0x5191, 0xf8 }, | 
|  | { 0x5192, 0x04 }, | 
|  | { 0x5193, 0x70 }, | 
|  | { 0x5194, 0xf0 }, | 
|  | { 0x5195, 0xf0 }, | 
|  | { 0x5196, 0x03 }, | 
|  | { 0x5197, 0x01 }, | 
|  | { 0x5198, 0x04 }, | 
|  | { 0x5199, 0x12 }, | 
|  | { 0x519a, 0x04 }, | 
|  | { 0x519b, 0x00 }, | 
|  | { 0x519c, 0x06 }, | 
|  | { 0x519d, 0x82 }, | 
|  | { 0x519e, 0x38 }, | 
|  | { 0x5381, 0x1e }, | 
|  | { 0x5382, 0x5b }, | 
|  | { 0x5383, 0x08 }, | 
|  | { 0x5384, 0x0a }, | 
|  | { 0x5385, 0x7e }, | 
|  | { 0x5386, 0x88 }, | 
|  | { 0x5387, 0x7c }, | 
|  | { 0x5388, 0x6c }, | 
|  | { 0x5389, 0x10 }, | 
|  | { 0x538a, 0x01 }, | 
|  | { 0x538b, 0x98 }, | 
|  | { 0x5300, 0x08 }, | 
|  | { 0x5301, 0x30 }, | 
|  | { 0x5302, 0x10 }, | 
|  | { 0x5303, 0x00 }, | 
|  | { 0x5304, 0x08 }, | 
|  | { 0x5305, 0x30 }, | 
|  | { 0x5306, 0x08 }, | 
|  | { 0x5307, 0x16 }, | 
|  | { 0x5309, 0x08 }, | 
|  | { 0x530a, 0x30 }, | 
|  | { 0x530b, 0x04 }, | 
|  | { 0x530c, 0x06 }, | 
|  | { 0x5480, 0x01 }, | 
|  | { 0x5481, 0x08 }, | 
|  | { 0x5482, 0x14 }, | 
|  | { 0x5483, 0x28 }, | 
|  | { 0x5484, 0x51 }, | 
|  | { 0x5485, 0x65 }, | 
|  | { 0x5486, 0x71 }, | 
|  | { 0x5487, 0x7d }, | 
|  | { 0x5488, 0x87 }, | 
|  | { 0x5489, 0x91 }, | 
|  | { 0x548a, 0x9a }, | 
|  | { 0x548b, 0xaa }, | 
|  | { 0x548c, 0xb8 }, | 
|  | { 0x548d, 0xcd }, | 
|  | { 0x548e, 0xdd }, | 
|  | { 0x548f, 0xea }, | 
|  | { 0x5490, 0x1d }, | 
|  | { 0x5580, 0x02 }, | 
|  | { 0x5583, 0x40 }, | 
|  | { 0x5584, 0x10 }, | 
|  | { 0x5589, 0x10 }, | 
|  | { 0x558a, 0x00 }, | 
|  | { 0x558b, 0xf8 }, | 
|  | { 0x5800, 0x3f }, | 
|  | { 0x5801, 0x16 }, | 
|  | { 0x5802, 0x0e }, | 
|  | { 0x5803, 0x0d }, | 
|  | { 0x5804, 0x17 }, | 
|  | { 0x5805, 0x3f }, | 
|  | { 0x5806, 0x0b }, | 
|  | { 0x5807, 0x06 }, | 
|  | { 0x5808, 0x04 }, | 
|  | { 0x5809, 0x04 }, | 
|  | { 0x580a, 0x06 }, | 
|  | { 0x580b, 0x0b }, | 
|  | { 0x580c, 0x09 }, | 
|  | { 0x580d, 0x03 }, | 
|  | { 0x580e, 0x00 }, | 
|  | { 0x580f, 0x00 }, | 
|  | { 0x5810, 0x03 }, | 
|  | { 0x5811, 0x08 }, | 
|  | { 0x5812, 0x0a }, | 
|  | { 0x5813, 0x03 }, | 
|  | { 0x5814, 0x00 }, | 
|  | { 0x5815, 0x00 }, | 
|  | { 0x5816, 0x04 }, | 
|  | { 0x5817, 0x09 }, | 
|  | { 0x5818, 0x0f }, | 
|  | { 0x5819, 0x08 }, | 
|  | { 0x581a, 0x06 }, | 
|  | { 0x581b, 0x06 }, | 
|  | { 0x581c, 0x08 }, | 
|  | { 0x581d, 0x0c }, | 
|  | { 0x581e, 0x3f }, | 
|  | { 0x581f, 0x1e }, | 
|  | { 0x5820, 0x12 }, | 
|  | { 0x5821, 0x13 }, | 
|  | { 0x5822, 0x21 }, | 
|  | { 0x5823, 0x3f }, | 
|  | { 0x5824, 0x68 }, | 
|  | { 0x5825, 0x28 }, | 
|  | { 0x5826, 0x2c }, | 
|  | { 0x5827, 0x28 }, | 
|  | { 0x5828, 0x08 }, | 
|  | { 0x5829, 0x48 }, | 
|  | { 0x582a, 0x64 }, | 
|  | { 0x582b, 0x62 }, | 
|  | { 0x582c, 0x64 }, | 
|  | { 0x582d, 0x28 }, | 
|  | { 0x582e, 0x46 }, | 
|  | { 0x582f, 0x62 }, | 
|  | { 0x5830, 0x60 }, | 
|  | { 0x5831, 0x62 }, | 
|  | { 0x5832, 0x26 }, | 
|  | { 0x5833, 0x48 }, | 
|  | { 0x5834, 0x66 }, | 
|  | { 0x5835, 0x44 }, | 
|  | { 0x5836, 0x64 }, | 
|  | { 0x5837, 0x28 }, | 
|  | { 0x5838, 0x66 }, | 
|  | { 0x5839, 0x48 }, | 
|  | { 0x583a, 0x2c }, | 
|  | { 0x583b, 0x28 }, | 
|  | { 0x583c, 0x26 }, | 
|  | { 0x583d, 0xae }, | 
|  | { 0x5025, 0x00 }, | 
|  | { 0x3a0f, 0x30 }, | 
|  | { 0x3a10, 0x28 }, | 
|  | { 0x3a1b, 0x30 }, | 
|  | { 0x3a1e, 0x26 }, | 
|  | { 0x3a11, 0x60 }, | 
|  | { 0x3a1f, 0x14 }, | 
|  | { 0x0601, 0x02 }, | 
|  | { 0x3008, 0x42 }, | 
|  | { 0x3008, 0x02 }, | 
|  | { OV5645_IO_MIPI_CTRL00, 0x40 }, | 
|  | { OV5645_MIPI_CTRL00, 0x24 }, | 
|  | { OV5645_PAD_OUTPUT00, 0x70 } | 
|  | }; | 
|  |  | 
|  | static const struct reg_value ov5645_setting_sxga[] = { | 
|  | { 0x3612, 0xa9 }, | 
|  | { 0x3614, 0x50 }, | 
|  | { 0x3618, 0x00 }, | 
|  | { 0x3034, 0x18 }, | 
|  | { 0x3035, 0x21 }, | 
|  | { 0x3036, 0x70 }, | 
|  | { 0x3600, 0x09 }, | 
|  | { 0x3601, 0x43 }, | 
|  | { 0x3708, 0x66 }, | 
|  | { 0x370c, 0xc3 }, | 
|  | { 0x3800, 0x00 }, | 
|  | { 0x3801, 0x00 }, | 
|  | { 0x3802, 0x00 }, | 
|  | { 0x3803, 0x06 }, | 
|  | { 0x3804, 0x0a }, | 
|  | { 0x3805, 0x3f }, | 
|  | { 0x3806, 0x07 }, | 
|  | { 0x3807, 0x9d }, | 
|  | { 0x3808, 0x05 }, | 
|  | { 0x3809, 0x00 }, | 
|  | { 0x380a, 0x03 }, | 
|  | { 0x380b, 0xc0 }, | 
|  | { 0x380c, 0x07 }, | 
|  | { 0x380d, 0x68 }, | 
|  | { 0x380e, 0x03 }, | 
|  | { 0x380f, 0xd8 }, | 
|  | { 0x3813, 0x06 }, | 
|  | { 0x3814, 0x31 }, | 
|  | { 0x3815, 0x31 }, | 
|  | { 0x3820, 0x47 }, | 
|  | { 0x3a02, 0x03 }, | 
|  | { 0x3a03, 0xd8 }, | 
|  | { 0x3a08, 0x01 }, | 
|  | { 0x3a09, 0xf8 }, | 
|  | { 0x3a0a, 0x01 }, | 
|  | { 0x3a0b, 0xa4 }, | 
|  | { 0x3a0e, 0x02 }, | 
|  | { 0x3a0d, 0x02 }, | 
|  | { 0x3a14, 0x03 }, | 
|  | { 0x3a15, 0xd8 }, | 
|  | { 0x3a18, 0x00 }, | 
|  | { 0x4004, 0x02 }, | 
|  | { 0x4005, 0x18 }, | 
|  | { 0x4300, 0x32 }, | 
|  | { 0x4202, 0x00 } | 
|  | }; | 
|  |  | 
|  | static const struct reg_value ov5645_setting_1080p[] = { | 
|  | { 0x3612, 0xab }, | 
|  | { 0x3614, 0x50 }, | 
|  | { 0x3618, 0x04 }, | 
|  | { 0x3034, 0x18 }, | 
|  | { 0x3035, 0x11 }, | 
|  | { 0x3036, 0x54 }, | 
|  | { 0x3600, 0x08 }, | 
|  | { 0x3601, 0x33 }, | 
|  | { 0x3708, 0x63 }, | 
|  | { 0x370c, 0xc0 }, | 
|  | { 0x3800, 0x01 }, | 
|  | { 0x3801, 0x50 }, | 
|  | { 0x3802, 0x01 }, | 
|  | { 0x3803, 0xb2 }, | 
|  | { 0x3804, 0x08 }, | 
|  | { 0x3805, 0xef }, | 
|  | { 0x3806, 0x05 }, | 
|  | { 0x3807, 0xf1 }, | 
|  | { 0x3808, 0x07 }, | 
|  | { 0x3809, 0x80 }, | 
|  | { 0x380a, 0x04 }, | 
|  | { 0x380b, 0x38 }, | 
|  | { 0x380c, 0x09 }, | 
|  | { 0x380d, 0xc4 }, | 
|  | { 0x380e, 0x04 }, | 
|  | { 0x380f, 0x60 }, | 
|  | { 0x3813, 0x04 }, | 
|  | { 0x3814, 0x11 }, | 
|  | { 0x3815, 0x11 }, | 
|  | { 0x3820, 0x47 }, | 
|  | { 0x4514, 0x88 }, | 
|  | { 0x3a02, 0x04 }, | 
|  | { 0x3a03, 0x60 }, | 
|  | { 0x3a08, 0x01 }, | 
|  | { 0x3a09, 0x50 }, | 
|  | { 0x3a0a, 0x01 }, | 
|  | { 0x3a0b, 0x18 }, | 
|  | { 0x3a0e, 0x03 }, | 
|  | { 0x3a0d, 0x04 }, | 
|  | { 0x3a14, 0x04 }, | 
|  | { 0x3a15, 0x60 }, | 
|  | { 0x3a18, 0x00 }, | 
|  | { 0x4004, 0x06 }, | 
|  | { 0x4005, 0x18 }, | 
|  | { 0x4300, 0x32 }, | 
|  | { 0x4202, 0x00 }, | 
|  | { 0x4837, 0x0b } | 
|  | }; | 
|  |  | 
|  | static const struct reg_value ov5645_setting_full[] = { | 
|  | { 0x3612, 0xab }, | 
|  | { 0x3614, 0x50 }, | 
|  | { 0x3618, 0x04 }, | 
|  | { 0x3034, 0x18 }, | 
|  | { 0x3035, 0x11 }, | 
|  | { 0x3036, 0x54 }, | 
|  | { 0x3600, 0x08 }, | 
|  | { 0x3601, 0x33 }, | 
|  | { 0x3708, 0x63 }, | 
|  | { 0x370c, 0xc0 }, | 
|  | { 0x3800, 0x00 }, | 
|  | { 0x3801, 0x00 }, | 
|  | { 0x3802, 0x00 }, | 
|  | { 0x3803, 0x00 }, | 
|  | { 0x3804, 0x0a }, | 
|  | { 0x3805, 0x3f }, | 
|  | { 0x3806, 0x07 }, | 
|  | { 0x3807, 0x9f }, | 
|  | { 0x3808, 0x0a }, | 
|  | { 0x3809, 0x20 }, | 
|  | { 0x380a, 0x07 }, | 
|  | { 0x380b, 0x98 }, | 
|  | { 0x380c, 0x0b }, | 
|  | { 0x380d, 0x1c }, | 
|  | { 0x380e, 0x07 }, | 
|  | { 0x380f, 0xb0 }, | 
|  | { 0x3813, 0x06 }, | 
|  | { 0x3814, 0x11 }, | 
|  | { 0x3815, 0x11 }, | 
|  | { 0x3820, 0x47 }, | 
|  | { 0x4514, 0x88 }, | 
|  | { 0x3a02, 0x07 }, | 
|  | { 0x3a03, 0xb0 }, | 
|  | { 0x3a08, 0x01 }, | 
|  | { 0x3a09, 0x27 }, | 
|  | { 0x3a0a, 0x00 }, | 
|  | { 0x3a0b, 0xf6 }, | 
|  | { 0x3a0e, 0x06 }, | 
|  | { 0x3a0d, 0x08 }, | 
|  | { 0x3a14, 0x07 }, | 
|  | { 0x3a15, 0xb0 }, | 
|  | { 0x3a18, 0x01 }, | 
|  | { 0x4004, 0x06 }, | 
|  | { 0x4005, 0x18 }, | 
|  | { 0x4300, 0x32 }, | 
|  | { 0x4837, 0x0b }, | 
|  | { 0x4202, 0x00 } | 
|  | }; | 
|  |  | 
|  | static const s64 link_freq[] = { | 
|  | 224000000, | 
|  | 336000000 | 
|  | }; | 
|  |  | 
|  | static const struct ov5645_mode_info ov5645_mode_info_data[] = { | 
|  | { | 
|  | .width = 1280, | 
|  | .height = 960, | 
|  | .data = ov5645_setting_sxga, | 
|  | .data_size = ARRAY_SIZE(ov5645_setting_sxga), | 
|  | .pixel_clock = 112000000, | 
|  | .link_freq = 0 /* an index in link_freq[] */ | 
|  | }, | 
|  | { | 
|  | .width = 1920, | 
|  | .height = 1080, | 
|  | .data = ov5645_setting_1080p, | 
|  | .data_size = ARRAY_SIZE(ov5645_setting_1080p), | 
|  | .pixel_clock = 168000000, | 
|  | .link_freq = 1 /* an index in link_freq[] */ | 
|  | }, | 
|  | { | 
|  | .width = 2592, | 
|  | .height = 1944, | 
|  | .data = ov5645_setting_full, | 
|  | .data_size = ARRAY_SIZE(ov5645_setting_full), | 
|  | .pixel_clock = 168000000, | 
|  | .link_freq = 1 /* an index in link_freq[] */ | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static int ov5645_write_reg(struct ov5645 *ov5645, u16 reg, u8 val) | 
|  | { | 
|  | u8 regbuf[3]; | 
|  | int ret; | 
|  |  | 
|  | regbuf[0] = reg >> 8; | 
|  | regbuf[1] = reg & 0xff; | 
|  | regbuf[2] = val; | 
|  |  | 
|  | ret = i2c_master_send(ov5645->i2c_client, regbuf, 3); | 
|  | if (ret < 0) { | 
|  | dev_err(ov5645->dev, "%s: write reg error %d: reg=%x, val=%x\n", | 
|  | __func__, ret, reg, val); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ov5645_read_reg(struct ov5645 *ov5645, u16 reg, u8 *val) | 
|  | { | 
|  | u8 regbuf[2]; | 
|  | int ret; | 
|  |  | 
|  | regbuf[0] = reg >> 8; | 
|  | regbuf[1] = reg & 0xff; | 
|  |  | 
|  | ret = i2c_master_send(ov5645->i2c_client, regbuf, 2); | 
|  | if (ret < 0) { | 
|  | dev_err(ov5645->dev, "%s: write reg error %d: reg=%x\n", | 
|  | __func__, ret, reg); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | ret = i2c_master_recv(ov5645->i2c_client, val, 1); | 
|  | if (ret < 0) { | 
|  | dev_err(ov5645->dev, "%s: read reg error %d: reg=%x\n", | 
|  | __func__, ret, reg); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ov5645_set_aec_mode(struct ov5645 *ov5645, u32 mode) | 
|  | { | 
|  | u8 val = ov5645->aec_pk_manual; | 
|  | int ret; | 
|  |  | 
|  | if (mode == V4L2_EXPOSURE_AUTO) | 
|  | val &= ~OV5645_AEC_MANUAL_ENABLE; | 
|  | else /* V4L2_EXPOSURE_MANUAL */ | 
|  | val |= OV5645_AEC_MANUAL_ENABLE; | 
|  |  | 
|  | ret = ov5645_write_reg(ov5645, OV5645_AEC_PK_MANUAL, val); | 
|  | if (!ret) | 
|  | ov5645->aec_pk_manual = val; | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int ov5645_set_agc_mode(struct ov5645 *ov5645, u32 enable) | 
|  | { | 
|  | u8 val = ov5645->aec_pk_manual; | 
|  | int ret; | 
|  |  | 
|  | if (enable) | 
|  | val &= ~OV5645_AGC_MANUAL_ENABLE; | 
|  | else | 
|  | val |= OV5645_AGC_MANUAL_ENABLE; | 
|  |  | 
|  | ret = ov5645_write_reg(ov5645, OV5645_AEC_PK_MANUAL, val); | 
|  | if (!ret) | 
|  | ov5645->aec_pk_manual = val; | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int ov5645_set_register_array(struct ov5645 *ov5645, | 
|  | const struct reg_value *settings, | 
|  | unsigned int num_settings) | 
|  | { | 
|  | unsigned int i; | 
|  | int ret; | 
|  |  | 
|  | for (i = 0; i < num_settings; ++i, ++settings) { | 
|  | ret = ov5645_write_reg(ov5645, settings->reg, settings->val); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | if (settings->reg == OV5645_SYSTEM_CTRL0 && | 
|  | settings->val == OV5645_SYSTEM_CTRL0_START) | 
|  | usleep_range(1000, 2000); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void __ov5645_set_power_off(struct device *dev) | 
|  | { | 
|  | struct v4l2_subdev *sd = dev_get_drvdata(dev); | 
|  | struct ov5645 *ov5645 = to_ov5645(sd); | 
|  |  | 
|  | ov5645_write_reg(ov5645, OV5645_IO_MIPI_CTRL00, 0x58); | 
|  | gpiod_set_value_cansleep(ov5645->rst_gpio, 1); | 
|  | gpiod_set_value_cansleep(ov5645->enable_gpio, 0); | 
|  | regulator_bulk_disable(OV5645_NUM_SUPPLIES, ov5645->supplies); | 
|  | } | 
|  |  | 
|  | static int ov5645_set_power_off(struct device *dev) | 
|  | { | 
|  | struct v4l2_subdev *sd = dev_get_drvdata(dev); | 
|  | struct ov5645 *ov5645 = to_ov5645(sd); | 
|  |  | 
|  | __ov5645_set_power_off(dev); | 
|  | clk_disable_unprepare(ov5645->xclk); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ov5645_set_power_on(struct device *dev) | 
|  | { | 
|  | struct v4l2_subdev *sd = dev_get_drvdata(dev); | 
|  | struct ov5645 *ov5645 = to_ov5645(sd); | 
|  | int ret; | 
|  |  | 
|  | ret = regulator_bulk_enable(OV5645_NUM_SUPPLIES, ov5645->supplies); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | ret = clk_prepare_enable(ov5645->xclk); | 
|  | if (ret < 0) { | 
|  | dev_err(ov5645->dev, "clk prepare enable failed\n"); | 
|  | regulator_bulk_disable(OV5645_NUM_SUPPLIES, ov5645->supplies); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | usleep_range(5000, 15000); | 
|  | gpiod_set_value_cansleep(ov5645->enable_gpio, 1); | 
|  |  | 
|  | usleep_range(1000, 2000); | 
|  | gpiod_set_value_cansleep(ov5645->rst_gpio, 0); | 
|  |  | 
|  | msleep(20); | 
|  |  | 
|  | ret = ov5645_set_register_array(ov5645, ov5645_global_init_setting, | 
|  | ARRAY_SIZE(ov5645_global_init_setting)); | 
|  | if (ret < 0) { | 
|  | dev_err(ov5645->dev, "could not set init registers\n"); | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | usleep_range(500, 1000); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | exit: | 
|  | __ov5645_set_power_off(dev); | 
|  | clk_disable_unprepare(ov5645->xclk); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int ov5645_set_saturation(struct ov5645 *ov5645, s32 value) | 
|  | { | 
|  | u32 reg_value = (value * 0x10) + 0x40; | 
|  | int ret; | 
|  |  | 
|  | ret = ov5645_write_reg(ov5645, OV5645_SDE_SAT_U, reg_value); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | return ov5645_write_reg(ov5645, OV5645_SDE_SAT_V, reg_value); | 
|  | } | 
|  |  | 
|  | static int ov5645_set_hflip(struct ov5645 *ov5645, s32 value) | 
|  | { | 
|  | u8 val = ov5645->timing_tc_reg21; | 
|  | int ret; | 
|  |  | 
|  | if (value == 0) | 
|  | val &= ~(OV5645_SENSOR_MIRROR); | 
|  | else | 
|  | val |= (OV5645_SENSOR_MIRROR); | 
|  |  | 
|  | ret = ov5645_write_reg(ov5645, OV5645_TIMING_TC_REG21, val); | 
|  | if (!ret) | 
|  | ov5645->timing_tc_reg21 = val; | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int ov5645_set_vflip(struct ov5645 *ov5645, s32 value) | 
|  | { | 
|  | u8 val = ov5645->timing_tc_reg20; | 
|  | int ret; | 
|  |  | 
|  | if (value == 0) | 
|  | val |= (OV5645_SENSOR_VFLIP | OV5645_ISP_VFLIP); | 
|  | else | 
|  | val &= ~(OV5645_SENSOR_VFLIP | OV5645_ISP_VFLIP); | 
|  |  | 
|  | ret = ov5645_write_reg(ov5645, OV5645_TIMING_TC_REG20, val); | 
|  | if (!ret) | 
|  | ov5645->timing_tc_reg20 = val; | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int ov5645_set_test_pattern(struct ov5645 *ov5645, s32 value) | 
|  | { | 
|  | u8 val = 0; | 
|  |  | 
|  | if (value) { | 
|  | val = OV5645_SET_TEST_PATTERN(value - 1); | 
|  | val |= OV5645_TEST_PATTERN_ENABLE; | 
|  | } | 
|  |  | 
|  | return ov5645_write_reg(ov5645, OV5645_PRE_ISP_TEST_SETTING_1, val); | 
|  | } | 
|  |  | 
|  | static const char * const ov5645_test_pattern_menu[] = { | 
|  | "Disabled", | 
|  | "Vertical Color Bars", | 
|  | "Pseudo-Random Data", | 
|  | "Color Square", | 
|  | "Black Image", | 
|  | }; | 
|  |  | 
|  | static int ov5645_set_awb(struct ov5645 *ov5645, s32 enable_auto) | 
|  | { | 
|  | u8 val = 0; | 
|  |  | 
|  | if (!enable_auto) | 
|  | val = OV5645_AWB_MANUAL_ENABLE; | 
|  |  | 
|  | return ov5645_write_reg(ov5645, OV5645_AWB_MANUAL_CONTROL, val); | 
|  | } | 
|  |  | 
|  | static int ov5645_s_ctrl(struct v4l2_ctrl *ctrl) | 
|  | { | 
|  | struct ov5645 *ov5645 = container_of(ctrl->handler, | 
|  | struct ov5645, ctrls); | 
|  | int ret; | 
|  |  | 
|  | if (!pm_runtime_get_if_in_use(ov5645->dev)) | 
|  | return 0; | 
|  |  | 
|  | switch (ctrl->id) { | 
|  | case V4L2_CID_SATURATION: | 
|  | ret = ov5645_set_saturation(ov5645, ctrl->val); | 
|  | break; | 
|  | case V4L2_CID_AUTO_WHITE_BALANCE: | 
|  | ret = ov5645_set_awb(ov5645, ctrl->val); | 
|  | break; | 
|  | case V4L2_CID_AUTOGAIN: | 
|  | ret = ov5645_set_agc_mode(ov5645, ctrl->val); | 
|  | break; | 
|  | case V4L2_CID_EXPOSURE_AUTO: | 
|  | ret = ov5645_set_aec_mode(ov5645, ctrl->val); | 
|  | break; | 
|  | case V4L2_CID_TEST_PATTERN: | 
|  | ret = ov5645_set_test_pattern(ov5645, ctrl->val); | 
|  | break; | 
|  | case V4L2_CID_HFLIP: | 
|  | ret = ov5645_set_hflip(ov5645, ctrl->val); | 
|  | break; | 
|  | case V4L2_CID_VFLIP: | 
|  | ret = ov5645_set_vflip(ov5645, ctrl->val); | 
|  | break; | 
|  | default: | 
|  | ret = -EINVAL; | 
|  | break; | 
|  | } | 
|  |  | 
|  | pm_runtime_mark_last_busy(ov5645->dev); | 
|  | pm_runtime_put_autosuspend(ov5645->dev); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static const struct v4l2_ctrl_ops ov5645_ctrl_ops = { | 
|  | .s_ctrl = ov5645_s_ctrl, | 
|  | }; | 
|  |  | 
|  | static int ov5645_enum_mbus_code(struct v4l2_subdev *sd, | 
|  | struct v4l2_subdev_state *sd_state, | 
|  | struct v4l2_subdev_mbus_code_enum *code) | 
|  | { | 
|  | if (code->index > 0) | 
|  | return -EINVAL; | 
|  |  | 
|  | code->code = MEDIA_BUS_FMT_UYVY8_1X16; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ov5645_enum_frame_size(struct v4l2_subdev *subdev, | 
|  | struct v4l2_subdev_state *sd_state, | 
|  | struct v4l2_subdev_frame_size_enum *fse) | 
|  | { | 
|  | if (fse->code != MEDIA_BUS_FMT_UYVY8_1X16) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (fse->index >= ARRAY_SIZE(ov5645_mode_info_data)) | 
|  | return -EINVAL; | 
|  |  | 
|  | fse->min_width = ov5645_mode_info_data[fse->index].width; | 
|  | fse->max_width = ov5645_mode_info_data[fse->index].width; | 
|  | fse->min_height = ov5645_mode_info_data[fse->index].height; | 
|  | fse->max_height = ov5645_mode_info_data[fse->index].height; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ov5645_set_format(struct v4l2_subdev *sd, | 
|  | struct v4l2_subdev_state *sd_state, | 
|  | struct v4l2_subdev_format *format) | 
|  | { | 
|  | struct ov5645 *ov5645 = to_ov5645(sd); | 
|  | struct v4l2_mbus_framefmt *__format; | 
|  | struct v4l2_rect *__crop; | 
|  | const struct ov5645_mode_info *new_mode; | 
|  | int ret; | 
|  |  | 
|  | __crop = v4l2_subdev_state_get_crop(sd_state, 0); | 
|  | new_mode = v4l2_find_nearest_size(ov5645_mode_info_data, | 
|  | ARRAY_SIZE(ov5645_mode_info_data), | 
|  | width, height, format->format.width, | 
|  | format->format.height); | 
|  |  | 
|  | __crop->width = new_mode->width; | 
|  | __crop->height = new_mode->height; | 
|  |  | 
|  | if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE) { | 
|  | ret = __v4l2_ctrl_s_ctrl_int64(ov5645->pixel_clock, | 
|  | new_mode->pixel_clock); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | ret = __v4l2_ctrl_s_ctrl(ov5645->link_freq, | 
|  | new_mode->link_freq); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | ov5645->current_mode = new_mode; | 
|  | } | 
|  |  | 
|  | __format = v4l2_subdev_state_get_format(sd_state, 0); | 
|  | __format->width = __crop->width; | 
|  | __format->height = __crop->height; | 
|  | __format->code = MEDIA_BUS_FMT_UYVY8_1X16; | 
|  | __format->field = V4L2_FIELD_NONE; | 
|  | __format->colorspace = V4L2_COLORSPACE_SRGB; | 
|  |  | 
|  | format->format = *__format; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ov5645_init_state(struct v4l2_subdev *subdev, | 
|  | struct v4l2_subdev_state *sd_state) | 
|  | { | 
|  | struct v4l2_subdev_format fmt = { | 
|  | .which = V4L2_SUBDEV_FORMAT_TRY, | 
|  | .pad = 0, | 
|  | .format = { | 
|  | .code = MEDIA_BUS_FMT_UYVY8_1X16, | 
|  | .width = ov5645_mode_info_data[1].width, | 
|  | .height = ov5645_mode_info_data[1].height, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | ov5645_set_format(subdev, sd_state, &fmt); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ov5645_get_selection(struct v4l2_subdev *sd, | 
|  | struct v4l2_subdev_state *sd_state, | 
|  | struct v4l2_subdev_selection *sel) | 
|  | { | 
|  | if (sel->target != V4L2_SEL_TGT_CROP) | 
|  | return -EINVAL; | 
|  |  | 
|  | sel->r = *v4l2_subdev_state_get_crop(sd_state, 0); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ov5645_enable_streams(struct v4l2_subdev *sd, | 
|  | struct v4l2_subdev_state *state, u32 pad, | 
|  | u64 streams_mask) | 
|  | { | 
|  | struct ov5645 *ov5645 = to_ov5645(sd); | 
|  | int ret; | 
|  |  | 
|  | ret = pm_runtime_resume_and_get(ov5645->dev); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | ret = ov5645_set_register_array(ov5645, | 
|  | ov5645->current_mode->data, | 
|  | ov5645->current_mode->data_size); | 
|  | if (ret < 0) { | 
|  | dev_err(ov5645->dev, "could not set mode %dx%d\n", | 
|  | ov5645->current_mode->width, | 
|  | ov5645->current_mode->height); | 
|  | goto err_rpm_put; | 
|  | } | 
|  | ret = __v4l2_ctrl_handler_setup(&ov5645->ctrls); | 
|  | if (ret < 0) { | 
|  | dev_err(ov5645->dev, "could not sync v4l2 controls\n"); | 
|  | goto err_rpm_put; | 
|  | } | 
|  |  | 
|  | ret = ov5645_write_reg(ov5645, OV5645_IO_MIPI_CTRL00, 0x45); | 
|  | if (ret < 0) | 
|  | goto err_rpm_put; | 
|  |  | 
|  | ret = ov5645_write_reg(ov5645, OV5645_SYSTEM_CTRL0, | 
|  | OV5645_SYSTEM_CTRL0_START); | 
|  | if (ret < 0) | 
|  | goto err_rpm_put; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_rpm_put: | 
|  | pm_runtime_put_sync(ov5645->dev); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int ov5645_disable_streams(struct v4l2_subdev *sd, | 
|  | struct v4l2_subdev_state *state, u32 pad, | 
|  | u64 streams_mask) | 
|  | { | 
|  | struct ov5645 *ov5645 = to_ov5645(sd); | 
|  | int ret; | 
|  |  | 
|  | ret = ov5645_write_reg(ov5645, OV5645_IO_MIPI_CTRL00, 0x40); | 
|  | if (ret < 0) | 
|  | goto rpm_put; | 
|  |  | 
|  | ret = ov5645_write_reg(ov5645, OV5645_SYSTEM_CTRL0, | 
|  | OV5645_SYSTEM_CTRL0_STOP); | 
|  |  | 
|  | rpm_put: | 
|  | pm_runtime_mark_last_busy(ov5645->dev); | 
|  | pm_runtime_put_autosuspend(ov5645->dev); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static const struct v4l2_subdev_video_ops ov5645_video_ops = { | 
|  | .s_stream = v4l2_subdev_s_stream_helper, | 
|  | }; | 
|  |  | 
|  | static const struct v4l2_subdev_pad_ops ov5645_subdev_pad_ops = { | 
|  | .enum_mbus_code = ov5645_enum_mbus_code, | 
|  | .enum_frame_size = ov5645_enum_frame_size, | 
|  | .get_fmt = v4l2_subdev_get_fmt, | 
|  | .set_fmt = ov5645_set_format, | 
|  | .get_selection = ov5645_get_selection, | 
|  | .enable_streams = ov5645_enable_streams, | 
|  | .disable_streams = ov5645_disable_streams, | 
|  | }; | 
|  |  | 
|  | static const struct v4l2_subdev_ops ov5645_subdev_ops = { | 
|  | .video = &ov5645_video_ops, | 
|  | .pad = &ov5645_subdev_pad_ops, | 
|  | }; | 
|  |  | 
|  | static const struct v4l2_subdev_internal_ops ov5645_internal_ops = { | 
|  | .init_state = ov5645_init_state, | 
|  | }; | 
|  |  | 
|  | static int ov5645_probe(struct i2c_client *client) | 
|  | { | 
|  | struct device *dev = &client->dev; | 
|  | struct device_node *endpoint; | 
|  | struct ov5645 *ov5645; | 
|  | u8 chip_id_high, chip_id_low; | 
|  | unsigned int i; | 
|  | u32 xclk_freq; | 
|  | int ret; | 
|  |  | 
|  | ov5645 = devm_kzalloc(dev, sizeof(struct ov5645), GFP_KERNEL); | 
|  | if (!ov5645) | 
|  | return -ENOMEM; | 
|  |  | 
|  | ov5645->i2c_client = client; | 
|  | ov5645->dev = dev; | 
|  |  | 
|  | endpoint = of_graph_get_endpoint_by_regs(dev->of_node, 0, -1); | 
|  | if (!endpoint) | 
|  | return dev_err_probe(dev, -EINVAL, | 
|  | "endpoint node not found\n"); | 
|  |  | 
|  | ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(endpoint), | 
|  | &ov5645->ep); | 
|  |  | 
|  | of_node_put(endpoint); | 
|  |  | 
|  | if (ret < 0) | 
|  | return dev_err_probe(dev, ret, | 
|  | "parsing endpoint node failed\n"); | 
|  |  | 
|  | if (ov5645->ep.bus_type != V4L2_MBUS_CSI2_DPHY) | 
|  | return dev_err_probe(dev, -EINVAL, | 
|  | "invalid bus type, must be CSI2\n"); | 
|  |  | 
|  | /* get system clock (xclk) */ | 
|  | ov5645->xclk = devm_clk_get(dev, NULL); | 
|  | if (IS_ERR(ov5645->xclk)) | 
|  | return dev_err_probe(dev, PTR_ERR(ov5645->xclk), | 
|  | "could not get xclk"); | 
|  |  | 
|  | ret = of_property_read_u32(dev->of_node, "clock-frequency", &xclk_freq); | 
|  | if (ret) | 
|  | return dev_err_probe(dev, ret, | 
|  | "could not get xclk frequency\n"); | 
|  |  | 
|  | /* external clock must be 24MHz, allow 1% tolerance */ | 
|  | if (xclk_freq < 23760000 || xclk_freq > 24240000) | 
|  | return dev_err_probe(dev, -EINVAL, | 
|  | "unsupported xclk frequency %u\n", | 
|  | xclk_freq); | 
|  |  | 
|  | ret = clk_set_rate(ov5645->xclk, xclk_freq); | 
|  | if (ret) | 
|  | return dev_err_probe(dev, ret, | 
|  | "could not set xclk frequency\n"); | 
|  |  | 
|  | for (i = 0; i < OV5645_NUM_SUPPLIES; i++) | 
|  | ov5645->supplies[i].supply = ov5645_supply_name[i]; | 
|  |  | 
|  | ret = devm_regulator_bulk_get(dev, OV5645_NUM_SUPPLIES, | 
|  | ov5645->supplies); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | ov5645->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_HIGH); | 
|  | if (IS_ERR(ov5645->enable_gpio)) | 
|  | return dev_err_probe(dev, PTR_ERR(ov5645->enable_gpio), | 
|  | "cannot get enable gpio\n"); | 
|  |  | 
|  | ov5645->rst_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); | 
|  | if (IS_ERR(ov5645->rst_gpio)) | 
|  | return dev_err_probe(dev, PTR_ERR(ov5645->rst_gpio), | 
|  | "cannot get reset gpio\n"); | 
|  |  | 
|  | v4l2_ctrl_handler_init(&ov5645->ctrls, 9); | 
|  | v4l2_ctrl_new_std(&ov5645->ctrls, &ov5645_ctrl_ops, | 
|  | V4L2_CID_SATURATION, -4, 4, 1, 0); | 
|  | v4l2_ctrl_new_std(&ov5645->ctrls, &ov5645_ctrl_ops, | 
|  | V4L2_CID_HFLIP, 0, 1, 1, 0); | 
|  | v4l2_ctrl_new_std(&ov5645->ctrls, &ov5645_ctrl_ops, | 
|  | V4L2_CID_VFLIP, 0, 1, 1, 0); | 
|  | v4l2_ctrl_new_std(&ov5645->ctrls, &ov5645_ctrl_ops, | 
|  | V4L2_CID_AUTOGAIN, 0, 1, 1, 1); | 
|  | v4l2_ctrl_new_std(&ov5645->ctrls, &ov5645_ctrl_ops, | 
|  | V4L2_CID_AUTO_WHITE_BALANCE, 0, 1, 1, 1); | 
|  | v4l2_ctrl_new_std_menu(&ov5645->ctrls, &ov5645_ctrl_ops, | 
|  | V4L2_CID_EXPOSURE_AUTO, V4L2_EXPOSURE_MANUAL, | 
|  | 0, V4L2_EXPOSURE_AUTO); | 
|  | v4l2_ctrl_new_std_menu_items(&ov5645->ctrls, &ov5645_ctrl_ops, | 
|  | V4L2_CID_TEST_PATTERN, | 
|  | ARRAY_SIZE(ov5645_test_pattern_menu) - 1, | 
|  | 0, 0, ov5645_test_pattern_menu); | 
|  | ov5645->pixel_clock = v4l2_ctrl_new_std(&ov5645->ctrls, | 
|  | &ov5645_ctrl_ops, | 
|  | V4L2_CID_PIXEL_RATE, | 
|  | 1, INT_MAX, 1, 1); | 
|  | ov5645->link_freq = v4l2_ctrl_new_int_menu(&ov5645->ctrls, | 
|  | &ov5645_ctrl_ops, | 
|  | V4L2_CID_LINK_FREQ, | 
|  | ARRAY_SIZE(link_freq) - 1, | 
|  | 0, link_freq); | 
|  | if (ov5645->link_freq) | 
|  | ov5645->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY; | 
|  |  | 
|  | ov5645->sd.ctrl_handler = &ov5645->ctrls; | 
|  |  | 
|  | if (ov5645->ctrls.error) { | 
|  | ret = ov5645->ctrls.error; | 
|  | dev_err_probe(dev, ret, "failed to add controls\n"); | 
|  | goto free_ctrl; | 
|  | } | 
|  |  | 
|  | v4l2_i2c_subdev_init(&ov5645->sd, client, &ov5645_subdev_ops); | 
|  | ov5645->sd.internal_ops = &ov5645_internal_ops; | 
|  | ov5645->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; | 
|  | ov5645->pad.flags = MEDIA_PAD_FL_SOURCE; | 
|  | ov5645->sd.dev = dev; | 
|  | ov5645->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR; | 
|  |  | 
|  | ret = media_entity_pads_init(&ov5645->sd.entity, 1, &ov5645->pad); | 
|  | if (ret < 0) { | 
|  | dev_err_probe(dev, ret, "could not register media entity\n"); | 
|  | goto free_ctrl; | 
|  | } | 
|  |  | 
|  | ret = ov5645_set_power_on(dev); | 
|  | if (ret) | 
|  | goto free_entity; | 
|  |  | 
|  | ret = ov5645_read_reg(ov5645, OV5645_CHIP_ID_HIGH, &chip_id_high); | 
|  | if (ret < 0 || chip_id_high != OV5645_CHIP_ID_HIGH_BYTE) { | 
|  | ret = -ENODEV; | 
|  | dev_err_probe(dev, ret, "could not read ID high\n"); | 
|  | goto power_down; | 
|  | } | 
|  | ret = ov5645_read_reg(ov5645, OV5645_CHIP_ID_LOW, &chip_id_low); | 
|  | if (ret < 0 || chip_id_low != OV5645_CHIP_ID_LOW_BYTE) { | 
|  | ret = -ENODEV; | 
|  | dev_err_probe(dev, ret, "could not read ID low\n"); | 
|  | goto power_down; | 
|  | } | 
|  |  | 
|  | dev_info(dev, "OV5645 detected at address 0x%02x\n", client->addr); | 
|  |  | 
|  | ret = ov5645_read_reg(ov5645, OV5645_AEC_PK_MANUAL, | 
|  | &ov5645->aec_pk_manual); | 
|  | if (ret < 0) { | 
|  | ret = -ENODEV; | 
|  | dev_err_probe(dev, ret, "could not read AEC/AGC mode\n"); | 
|  | goto power_down; | 
|  | } | 
|  |  | 
|  | ret = ov5645_read_reg(ov5645, OV5645_TIMING_TC_REG20, | 
|  | &ov5645->timing_tc_reg20); | 
|  | if (ret < 0) { | 
|  | ret = -ENODEV; | 
|  | dev_err_probe(dev, ret, "could not read vflip value\n"); | 
|  | goto power_down; | 
|  | } | 
|  |  | 
|  | ret = ov5645_read_reg(ov5645, OV5645_TIMING_TC_REG21, | 
|  | &ov5645->timing_tc_reg21); | 
|  | if (ret < 0) { | 
|  | ret = -ENODEV; | 
|  | dev_err_probe(dev, ret, "could not read hflip value\n"); | 
|  | goto power_down; | 
|  | } | 
|  |  | 
|  | ov5645->sd.state_lock = ov5645->ctrls.lock; | 
|  | ret = v4l2_subdev_init_finalize(&ov5645->sd); | 
|  | if (ret < 0) { | 
|  | dev_err_probe(dev, ret, "subdev init error\n"); | 
|  | goto power_down; | 
|  | } | 
|  |  | 
|  | pm_runtime_set_active(dev); | 
|  | pm_runtime_get_noresume(dev); | 
|  | pm_runtime_enable(dev); | 
|  |  | 
|  | ret = v4l2_async_register_subdev_sensor(&ov5645->sd); | 
|  | if (ret < 0) { | 
|  | dev_err_probe(dev, ret, "could not register v4l2 device\n"); | 
|  | goto err_pm_runtime; | 
|  | } | 
|  |  | 
|  | pm_runtime_set_autosuspend_delay(dev, 1000); | 
|  | pm_runtime_use_autosuspend(dev); | 
|  | pm_runtime_mark_last_busy(dev); | 
|  | pm_runtime_put_autosuspend(dev); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_pm_runtime: | 
|  | pm_runtime_disable(dev); | 
|  | pm_runtime_put_noidle(dev); | 
|  | v4l2_subdev_cleanup(&ov5645->sd); | 
|  | power_down: | 
|  | ov5645_set_power_off(dev); | 
|  | free_entity: | 
|  | media_entity_cleanup(&ov5645->sd.entity); | 
|  | free_ctrl: | 
|  | v4l2_ctrl_handler_free(&ov5645->ctrls); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void ov5645_remove(struct i2c_client *client) | 
|  | { | 
|  | struct v4l2_subdev *sd = i2c_get_clientdata(client); | 
|  | struct ov5645 *ov5645 = to_ov5645(sd); | 
|  |  | 
|  | v4l2_async_unregister_subdev(&ov5645->sd); | 
|  | v4l2_subdev_cleanup(sd); | 
|  | media_entity_cleanup(&ov5645->sd.entity); | 
|  | v4l2_ctrl_handler_free(&ov5645->ctrls); | 
|  | pm_runtime_disable(ov5645->dev); | 
|  | if (!pm_runtime_status_suspended(ov5645->dev)) | 
|  | ov5645_set_power_off(ov5645->dev); | 
|  | pm_runtime_set_suspended(ov5645->dev); | 
|  | } | 
|  |  | 
|  | static const struct i2c_device_id ov5645_id[] = { | 
|  | { "ov5645" }, | 
|  | {} | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(i2c, ov5645_id); | 
|  |  | 
|  | static const struct of_device_id ov5645_of_match[] = { | 
|  | { .compatible = "ovti,ov5645" }, | 
|  | { /* sentinel */ } | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(of, ov5645_of_match); | 
|  |  | 
|  | static const struct dev_pm_ops ov5645_pm_ops = { | 
|  | SET_RUNTIME_PM_OPS(ov5645_set_power_off, ov5645_set_power_on, NULL) | 
|  | }; | 
|  |  | 
|  | static struct i2c_driver ov5645_i2c_driver = { | 
|  | .driver = { | 
|  | .of_match_table = ov5645_of_match, | 
|  | .name  = "ov5645", | 
|  | .pm = &ov5645_pm_ops, | 
|  | }, | 
|  | .probe = ov5645_probe, | 
|  | .remove = ov5645_remove, | 
|  | .id_table = ov5645_id, | 
|  | }; | 
|  |  | 
|  | module_i2c_driver(ov5645_i2c_driver); | 
|  |  | 
|  | MODULE_DESCRIPTION("Omnivision OV5645 Camera Driver"); | 
|  | MODULE_AUTHOR("Todor Tomov <todor.tomov@linaro.org>"); | 
|  | MODULE_LICENSE("GPL v2"); |