ARM: dts: rockchip: Split GPIO keys for veyron into multiple devices
With a single device DT overrides can become messy, especially when
keys are added or removed. Multiple devices also allow to
enable/disable wakeup per key/group.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
[used actual switch+event constants in new lid-switch entry]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
diff --git a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
index fbef345..5727017 100644
--- a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
@@ -70,6 +70,21 @@
pinctrl-0 = <&ac_present_ap>;
};
+ lid_switch: lid-switch {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&ap_lid_int_l>;
+
+ lid {
+ label = "Lid";
+ gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
+ wakeup-source;
+ linux,code = <SW_LID>;
+ linux,input-type = <EV_SW>;
+ debounce-interval = <1>;
+ };
+ };
+
panel: panel {
compatible ="innolux,n116bge", "simple-panel";
status = "okay";
@@ -149,18 +164,6 @@
status = "okay";
};
-&gpio_keys {
- pinctrl-0 = <&pwr_key_l &ap_lid_int_l>;
- lid {
- label = "Lid";
- gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
- wakeup-source;
- linux,code = <0>; /* SW_LID */
- linux,input-type = <5>; /* EV_SW */
- debounce-interval = <1>;
- };
-};
-
&pwm0 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
index a65099b..b2cc70a 100644
--- a/arch/arm/boot/dts/rk3288-veyron-minnie.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
@@ -48,6 +48,26 @@
regulator-boot-on;
vin-supply = <&vcc18_wl>;
};
+
+ volume_buttons: volume-buttons {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&volum_down_l &volum_up_l>;
+
+ volum_down {
+ label = "Volum_down";
+ gpios = <&gpio5 RK_PB3 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ debounce-interval = <100>;
+ };
+
+ volum_up {
+ label = "Volum_up";
+ gpios = <&gpio5 RK_PB2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ debounce-interval = <100>;
+ };
+ };
};
&backlight {
@@ -90,24 +110,6 @@
pwm-off-delay-ms = <200>;
};
-&gpio_keys {
- pinctrl-0 = <&pwr_key_l &ap_lid_int_l &volum_down_l &volum_up_l>;
-
- volum_down {
- label = "Volum_down";
- gpios = <&gpio5 RK_PB3 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_VOLUMEDOWN>;
- debounce-interval = <100>;
- };
-
- volum_up {
- label = "Volum_up";
- gpios = <&gpio5 RK_PB2 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_VOLUMEUP>;
- debounce-interval = <100>;
- };
-};
-
&i2c_tunnel {
battery: bq27500@55 {
compatible = "ti,bq27500";
diff --git a/arch/arm/boot/dts/rk3288-veyron-pinky.dts b/arch/arm/boot/dts/rk3288-veyron-pinky.dts
index 9645be7..9b6f4d9 100644
--- a/arch/arm/boot/dts/rk3288-veyron-pinky.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-pinky.dts
@@ -35,7 +35,7 @@
force-hpd;
};
-&gpio_keys {
+&lid_switch {
pinctrl-0 = <&pwr_key_h &ap_lid_int_l>;
power {
diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi
index c574844..3257ca9 100644
--- a/arch/arm/boot/dts/rk3288-veyron.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron.dtsi
@@ -23,11 +23,11 @@
reg = <0x0 0x0 0x0 0x80000000>;
};
- gpio_keys: gpio-keys {
+ power_button: power-button {
compatible = "gpio-keys";
-
pinctrl-names = "default";
pinctrl-0 = <&pwr_key_l>;
+
power {
label = "Power";
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
