| // SPDX-License-Identifier: GPL-2.0+ | |
| /* | |
| * RDA8810PL SoC timer driver | |
| * | |
| * Copyright RDA Microelectronics Company Limited | |
| * Copyright (c) 2017 Andreas Färber | |
| * Copyright (c) 2018 Manivannan Sadhasivam | |
| * | |
| * RDA8810PL has two independent timers: OSTIMER (56 bit) and HWTIMER (64 bit). | |
| * Each timer provides optional interrupt support. In this driver, OSTIMER is | |
| * used for clockevents and HWTIMER is used for clocksource. | |
| */ | |
| #include <linux/init.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/sched_clock.h> | |
| #include "timer-of.h" | |
| #define RDA_OSTIMER_LOADVAL_L 0x000 | |
| #define RDA_OSTIMER_CTRL 0x004 | |
| #define RDA_HWTIMER_LOCKVAL_L 0x024 | |
| #define RDA_HWTIMER_LOCKVAL_H 0x028 | |
| #define RDA_TIMER_IRQ_MASK_SET 0x02c | |
| #define RDA_TIMER_IRQ_MASK_CLR 0x030 | |
| #define RDA_TIMER_IRQ_CLR 0x034 | |
| #define RDA_OSTIMER_CTRL_ENABLE BIT(24) | |
| #define RDA_OSTIMER_CTRL_REPEAT BIT(28) | |
| #define RDA_OSTIMER_CTRL_LOAD BIT(30) | |
| #define RDA_TIMER_IRQ_MASK_OSTIMER BIT(0) | |
| #define RDA_TIMER_IRQ_CLR_OSTIMER BIT(0) | |
| static int rda_ostimer_start(void __iomem *base, bool periodic, u64 cycles) | |
| { | |
| u32 ctrl, load_l; | |
| load_l = (u32)cycles; | |
| ctrl = ((cycles >> 32) & 0xffffff); | |
| ctrl |= RDA_OSTIMER_CTRL_LOAD | RDA_OSTIMER_CTRL_ENABLE; | |
| if (periodic) | |
| ctrl |= RDA_OSTIMER_CTRL_REPEAT; | |
| /* Enable ostimer interrupt first */ | |
| writel_relaxed(RDA_TIMER_IRQ_MASK_OSTIMER, | |
| base + RDA_TIMER_IRQ_MASK_SET); | |
| /* Write low 32 bits first, high 24 bits are with ctrl */ | |
| writel_relaxed(load_l, base + RDA_OSTIMER_LOADVAL_L); | |
| writel_relaxed(ctrl, base + RDA_OSTIMER_CTRL); | |
| return 0; | |
| } | |
| static int rda_ostimer_stop(void __iomem *base) | |
| { | |
| /* Disable ostimer interrupt first */ | |
| writel_relaxed(RDA_TIMER_IRQ_MASK_OSTIMER, | |
| base + RDA_TIMER_IRQ_MASK_CLR); | |
| writel_relaxed(0, base + RDA_OSTIMER_CTRL); | |
| return 0; | |
| } | |
| static int rda_ostimer_set_state_shutdown(struct clock_event_device *evt) | |
| { | |
| struct timer_of *to = to_timer_of(evt); | |
| rda_ostimer_stop(timer_of_base(to)); | |
| return 0; | |
| } | |
| static int rda_ostimer_set_state_oneshot(struct clock_event_device *evt) | |
| { | |
| struct timer_of *to = to_timer_of(evt); | |
| rda_ostimer_stop(timer_of_base(to)); | |
| return 0; | |
| } | |
| static int rda_ostimer_set_state_periodic(struct clock_event_device *evt) | |
| { | |
| struct timer_of *to = to_timer_of(evt); | |
| unsigned long cycles_per_jiffy; | |
| rda_ostimer_stop(timer_of_base(to)); | |
| cycles_per_jiffy = ((unsigned long long)NSEC_PER_SEC / HZ * | |
| evt->mult) >> evt->shift; | |
| rda_ostimer_start(timer_of_base(to), true, cycles_per_jiffy); | |
| return 0; | |
| } | |
| static int rda_ostimer_tick_resume(struct clock_event_device *evt) | |
| { | |
| return 0; | |
| } | |
| static int rda_ostimer_set_next_event(unsigned long evt, | |
| struct clock_event_device *ev) | |
| { | |
| struct timer_of *to = to_timer_of(ev); | |
| rda_ostimer_start(timer_of_base(to), false, evt); | |
| return 0; | |
| } | |
| static irqreturn_t rda_ostimer_interrupt(int irq, void *dev_id) | |
| { | |
| struct clock_event_device *evt = dev_id; | |
| struct timer_of *to = to_timer_of(evt); | |
| /* clear timer int */ | |
| writel_relaxed(RDA_TIMER_IRQ_CLR_OSTIMER, | |
| timer_of_base(to) + RDA_TIMER_IRQ_CLR); | |
| if (evt->event_handler) | |
| evt->event_handler(evt); | |
| return IRQ_HANDLED; | |
| } | |
| static struct timer_of rda_ostimer_of = { | |
| .flags = TIMER_OF_IRQ | TIMER_OF_BASE, | |
| .clkevt = { | |
| .name = "rda-ostimer", | |
| .rating = 250, | |
| .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT | | |
| CLOCK_EVT_FEAT_DYNIRQ, | |
| .set_state_shutdown = rda_ostimer_set_state_shutdown, | |
| .set_state_oneshot = rda_ostimer_set_state_oneshot, | |
| .set_state_periodic = rda_ostimer_set_state_periodic, | |
| .tick_resume = rda_ostimer_tick_resume, | |
| .set_next_event = rda_ostimer_set_next_event, | |
| }, | |
| .of_base = { | |
| .name = "rda-timer", | |
| .index = 0, | |
| }, | |
| .of_irq = { | |
| .name = "ostimer", | |
| .handler = rda_ostimer_interrupt, | |
| .flags = IRQF_TIMER, | |
| }, | |
| }; | |
| static u64 rda_hwtimer_clocksource_read(void) | |
| { | |
| void __iomem *base = timer_of_base(&rda_ostimer_of); | |
| u32 lo, hi; | |
| /* Always read low 32 bits first */ | |
| do { | |
| lo = readl_relaxed(base + RDA_HWTIMER_LOCKVAL_L); | |
| hi = readl_relaxed(base + RDA_HWTIMER_LOCKVAL_H); | |
| } while (hi != readl_relaxed(base + RDA_HWTIMER_LOCKVAL_H)); | |
| return ((u64)hi << 32) | lo; | |
| } | |
| static u64 rda_hwtimer_read(struct clocksource *cs) | |
| { | |
| return rda_hwtimer_clocksource_read(); | |
| } | |
| static struct clocksource rda_hwtimer_clocksource = { | |
| .name = "rda-timer", | |
| .rating = 400, | |
| .read = rda_hwtimer_read, | |
| .mask = CLOCKSOURCE_MASK(64), | |
| .flags = CLOCK_SOURCE_IS_CONTINUOUS, | |
| }; | |
| static int __init rda_timer_init(struct device_node *np) | |
| { | |
| unsigned long rate = 2000000; | |
| int ret; | |
| ret = timer_of_init(np, &rda_ostimer_of); | |
| if (ret) | |
| return ret; | |
| clocksource_register_hz(&rda_hwtimer_clocksource, rate); | |
| sched_clock_register(rda_hwtimer_clocksource_read, 64, rate); | |
| clockevents_config_and_register(&rda_ostimer_of.clkevt, rate, | |
| 0x2, UINT_MAX); | |
| return 0; | |
| } | |
| TIMER_OF_DECLARE(rda8810pl, "rda,8810pl-timer", rda_timer_init); |