| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * Debugfs interface | |
| * | |
| * Copyright (C) 2020, Intel Corporation | |
| * Authors: Gil Fine <gil.fine@intel.com> | |
| * Mika Westerberg <mika.westerberg@linux.intel.com> | |
| */ | |
| #include <linux/array_size.h> | |
| #include <linux/bitfield.h> | |
| #include <linux/debugfs.h> | |
| #include <linux/delay.h> | |
| #include <linux/pm_runtime.h> | |
| #include <linux/string_choices.h> | |
| #include <linux/uaccess.h> | |
| #include "tb.h" | |
| #include "sb_regs.h" | |
| #define PORT_CAP_V1_PCIE_LEN 1 | |
| #define PORT_CAP_V2_PCIE_LEN 2 | |
| #define PORT_CAP_POWER_LEN 2 | |
| #define PORT_CAP_LANE_LEN 3 | |
| #define PORT_CAP_USB3_LEN 5 | |
| #define PORT_CAP_DP_V1_LEN 9 | |
| #define PORT_CAP_DP_V2_LEN 14 | |
| #define PORT_CAP_TMU_V1_LEN 8 | |
| #define PORT_CAP_TMU_V2_LEN 10 | |
| #define PORT_CAP_BASIC_LEN 9 | |
| #define PORT_CAP_USB4_LEN 20 | |
| #define SWITCH_CAP_TMU_LEN 26 | |
| #define SWITCH_CAP_BASIC_LEN 27 | |
| #define PATH_LEN 2 | |
| #define COUNTER_SET_LEN 3 | |
| /* | |
| * USB4 spec doesn't specify dwell range, the range of 100 ms to 500 ms | |
| * probed to give good results. | |
| */ | |
| #define MIN_DWELL_TIME 100 /* ms */ | |
| #define MAX_DWELL_TIME 500 /* ms */ | |
| #define DWELL_SAMPLE_INTERVAL 10 | |
| enum usb4_margin_cap_voltage_indp { | |
| USB4_MARGIN_CAP_VOLTAGE_INDP_GEN_2_3_MIN, | |
| USB4_MARGIN_CAP_VOLTAGE_INDP_GEN_2_3_HL, | |
| USB4_MARGIN_CAP_VOLTAGE_INDP_GEN_2_3_BOTH, | |
| USB4_MARGIN_CAP_VOLTAGE_INDP_GEN_4_MIN, | |
| USB4_MARGIN_CAP_VOLTAGE_INDP_GEN_4_BOTH, | |
| USB4_MARGIN_CAP_VOLTAGE_INDP_UNKNOWN, | |
| }; | |
| enum usb4_margin_cap_time_indp { | |
| USB4_MARGIN_CAP_TIME_INDP_GEN_2_3_MIN, | |
| USB4_MARGIN_CAP_TIME_INDP_GEN_2_3_LR, | |
| USB4_MARGIN_CAP_TIME_INDP_GEN_2_3_BOTH, | |
| USB4_MARGIN_CAP_TIME_INDP_GEN_4_MIN, | |
| USB4_MARGIN_CAP_TIME_INDP_GEN_4_BOTH, | |
| USB4_MARGIN_CAP_TIME_INDP_UNKNOWN, | |
| }; | |
| /* Sideband registers and their sizes as defined in the USB4 spec */ | |
| struct sb_reg { | |
| unsigned int reg; | |
| unsigned int size; | |
| }; | |
| #define SB_MAX_SIZE 64 | |
| /* Sideband registers for router */ | |
| static const struct sb_reg port_sb_regs[] = { | |
| { USB4_SB_VENDOR_ID, 4 }, | |
| { USB4_SB_PRODUCT_ID, 4 }, | |
| { USB4_SB_DEBUG_CONF, 4 }, | |
| { USB4_SB_DEBUG, 54 }, | |
| { USB4_SB_LRD_TUNING, 4 }, | |
| { USB4_SB_OPCODE, 4 }, | |
| { USB4_SB_METADATA, 4 }, | |
| { USB4_SB_LINK_CONF, 3 }, | |
| { USB4_SB_GEN23_TXFFE, 4 }, | |
| { USB4_SB_GEN4_TXFFE, 4 }, | |
| { USB4_SB_VERSION, 4 }, | |
| { USB4_SB_DATA, 64 }, | |
| }; | |
| /* Sideband registers for retimer */ | |
| static const struct sb_reg retimer_sb_regs[] = { | |
| { USB4_SB_VENDOR_ID, 4 }, | |
| { USB4_SB_PRODUCT_ID, 4 }, | |
| { USB4_SB_FW_VERSION, 4 }, | |
| { USB4_SB_LRD_TUNING, 4 }, | |
| { USB4_SB_OPCODE, 4 }, | |
| { USB4_SB_METADATA, 4 }, | |
| { USB4_SB_GEN23_TXFFE, 4 }, | |
| { USB4_SB_GEN4_TXFFE, 4 }, | |
| { USB4_SB_VERSION, 4 }, | |
| { USB4_SB_DATA, 64 }, | |
| }; | |
| #define DEBUGFS_ATTR(__space, __write) \ | |
| static int __space ## _open(struct inode *inode, struct file *file) \ | |
| { \ | |
| return single_open(file, __space ## _show, inode->i_private); \ | |
| } \ | |
| \ | |
| static const struct file_operations __space ## _fops = { \ | |
| .owner = THIS_MODULE, \ | |
| .open = __space ## _open, \ | |
| .release = single_release, \ | |
| .read = seq_read, \ | |
| .write = __write, \ | |
| .llseek = seq_lseek, \ | |
| } | |
| #define DEBUGFS_ATTR_RO(__space) \ | |
| DEBUGFS_ATTR(__space, NULL) | |
| #define DEBUGFS_ATTR_RW(__space) \ | |
| DEBUGFS_ATTR(__space, __space ## _write) | |
| static struct dentry *tb_debugfs_root; | |
| static void *validate_and_copy_from_user(const void __user *user_buf, | |
| size_t *count) | |
| { | |
| size_t nbytes; | |
| void *buf; | |
| if (!*count) | |
| return ERR_PTR(-EINVAL); | |
| if (!access_ok(user_buf, *count)) | |
| return ERR_PTR(-EFAULT); | |
| buf = kzalloc(PAGE_SIZE, GFP_KERNEL); | |
| if (!buf) | |
| return ERR_PTR(-ENOMEM); | |
| nbytes = min_t(size_t, *count, PAGE_SIZE); | |
| if (copy_from_user(buf, user_buf, nbytes)) { | |
| kfree(buf); | |
| return ERR_PTR(-EFAULT); | |
| } | |
| *count = nbytes; | |
| return buf; | |
| } | |
| static bool parse_line(char **line, u32 *offs, u32 *val, int short_fmt_len, | |
| int long_fmt_len) | |
| { | |
| char *token; | |
| u32 v[5]; | |
| int ret; | |
| token = strsep(line, "\n"); | |
| if (!token) | |
| return false; | |
| /* | |
| * For Adapter/Router configuration space: | |
| * Short format is: offset value\n | |
| * v[0] v[1] | |
| * Long format as produced from the read side: | |
| * offset relative_offset cap_id vs_cap_id value\n | |
| * v[0] v[1] v[2] v[3] v[4] | |
| * | |
| * For Path configuration space: | |
| * Short format is: offset value\n | |
| * v[0] v[1] | |
| * Long format as produced from the read side: | |
| * offset relative_offset in_hop_id value\n | |
| * v[0] v[1] v[2] v[3] | |
| * | |
| * For Counter configuration space: | |
| * Short format is: offset\n | |
| * v[0] | |
| * Long format as produced from the read side: | |
| * offset relative_offset counter_id value\n | |
| * v[0] v[1] v[2] v[3] | |
| */ | |
| ret = sscanf(token, "%i %i %i %i %i", &v[0], &v[1], &v[2], &v[3], &v[4]); | |
| /* In case of Counters, clear counter, "val" content is NA */ | |
| if (ret == short_fmt_len) { | |
| *offs = v[0]; | |
| *val = v[short_fmt_len - 1]; | |
| return true; | |
| } else if (ret == long_fmt_len) { | |
| *offs = v[0]; | |
| *val = v[long_fmt_len - 1]; | |
| return true; | |
| } | |
| return false; | |
| } | |
| #if IS_ENABLED(CONFIG_USB4_DEBUGFS_WRITE) | |
| /* | |
| * Path registers need to be written in double word pairs and they both must be | |
| * read before written. This writes one double word in path config space | |
| * following the spec flow. | |
| */ | |
| static int path_write_one(struct tb_port *port, u32 val, u32 offset) | |
| { | |
| u32 index = offset % PATH_LEN; | |
| u32 offs = offset - index; | |
| u32 data[PATH_LEN]; | |
| int ret; | |
| ret = tb_port_read(port, data, TB_CFG_HOPS, offs, PATH_LEN); | |
| if (ret) | |
| return ret; | |
| data[index] = val; | |
| return tb_port_write(port, data, TB_CFG_HOPS, offs, PATH_LEN); | |
| } | |
| static ssize_t regs_write(struct tb_switch *sw, struct tb_port *port, | |
| enum tb_cfg_space space, const char __user *user_buf, | |
| size_t count, loff_t *ppos) | |
| { | |
| int long_fmt_len, ret = 0; | |
| struct tb *tb = sw->tb; | |
| char *line, *buf; | |
| u32 val, offset; | |
| buf = validate_and_copy_from_user(user_buf, &count); | |
| if (IS_ERR(buf)) | |
| return PTR_ERR(buf); | |
| pm_runtime_get_sync(&sw->dev); | |
| if (mutex_lock_interruptible(&tb->lock)) { | |
| ret = -ERESTARTSYS; | |
| goto out; | |
| } | |
| /* User did hardware changes behind the driver's back */ | |
| add_taint(TAINT_USER, LOCKDEP_STILL_OK); | |
| if (space == TB_CFG_HOPS) | |
| long_fmt_len = 4; | |
| else | |
| long_fmt_len = 5; | |
| line = buf; | |
| while (parse_line(&line, &offset, &val, 2, long_fmt_len)) { | |
| if (port) { | |
| if (space == TB_CFG_HOPS) | |
| ret = path_write_one(port, val, offset); | |
| else | |
| ret = tb_port_write(port, &val, space, offset, 1); | |
| } else { | |
| ret = tb_sw_write(sw, &val, TB_CFG_SWITCH, offset, 1); | |
| } | |
| if (ret) | |
| break; | |
| } | |
| mutex_unlock(&tb->lock); | |
| out: | |
| pm_runtime_mark_last_busy(&sw->dev); | |
| pm_runtime_put_autosuspend(&sw->dev); | |
| kfree(buf); | |
| return ret < 0 ? ret : count; | |
| } | |
| static ssize_t port_regs_write(struct file *file, const char __user *user_buf, | |
| size_t count, loff_t *ppos) | |
| { | |
| struct seq_file *s = file->private_data; | |
| struct tb_port *port = s->private; | |
| return regs_write(port->sw, port, TB_CFG_PORT, user_buf, count, ppos); | |
| } | |
| static ssize_t path_write(struct file *file, const char __user *user_buf, | |
| size_t count, loff_t *ppos) | |
| { | |
| struct seq_file *s = file->private_data; | |
| struct tb_port *port = s->private; | |
| return regs_write(port->sw, port, TB_CFG_HOPS, user_buf, count, ppos); | |
| } | |
| static ssize_t switch_regs_write(struct file *file, const char __user *user_buf, | |
| size_t count, loff_t *ppos) | |
| { | |
| struct seq_file *s = file->private_data; | |
| struct tb_switch *sw = s->private; | |
| return regs_write(sw, NULL, TB_CFG_SWITCH, user_buf, count, ppos); | |
| } | |
| static bool parse_sb_line(char **line, u8 *reg, u8 *data, size_t data_size, | |
| size_t *bytes_read) | |
| { | |
| char *field, *token; | |
| int i; | |
| token = strsep(line, "\n"); | |
| if (!token) | |
| return false; | |
| /* Parse the register first */ | |
| field = strsep(&token, " "); | |
| if (!field) | |
| return false; | |
| if (kstrtou8(field, 0, reg)) | |
| return false; | |
| /* Then the values for the register, up to data_size */ | |
| for (i = 0; i < data_size; i++) { | |
| field = strsep(&token, " "); | |
| if (!field) | |
| break; | |
| if (kstrtou8(field, 0, &data[i])) | |
| return false; | |
| } | |
| *bytes_read = i; | |
| return true; | |
| } | |
| static ssize_t sb_regs_write(struct tb_port *port, const struct sb_reg *sb_regs, | |
| size_t size, enum usb4_sb_target target, u8 index, | |
| char *buf, size_t count, loff_t *ppos) | |
| { | |
| u8 reg, data[SB_MAX_SIZE]; | |
| size_t bytes_read; | |
| char *line = buf; | |
| /* User did hardware changes behind the driver's back */ | |
| add_taint(TAINT_USER, LOCKDEP_STILL_OK); | |
| /* | |
| * For sideband registers we accept: | |
| * reg b0 b1 b2...\n | |
| * | |
| * Here "reg" is the byte offset of the sideband register and "b0".. | |
| * are the byte values. There can be less byte values than the register | |
| * size. The leftovers will not be overwritten. | |
| */ | |
| while (parse_sb_line(&line, ®, data, ARRAY_SIZE(data), &bytes_read)) { | |
| const struct sb_reg *sb_reg; | |
| int ret; | |
| /* At least one byte must be passed */ | |
| if (bytes_read < 1) | |
| return -EINVAL; | |
| /* Find the register */ | |
| sb_reg = NULL; | |
| for (int i = 0; i < size; i++) { | |
| if (sb_regs[i].reg == reg) { | |
| sb_reg = &sb_regs[i]; | |
| break; | |
| } | |
| } | |
| if (!sb_reg) | |
| return -EINVAL; | |
| if (bytes_read > sb_reg->size) | |
| return -E2BIG; | |
| ret = usb4_port_sb_write(port, target, index, sb_reg->reg, data, | |
| bytes_read); | |
| if (ret) | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| static ssize_t port_sb_regs_write(struct file *file, const char __user *user_buf, | |
| size_t count, loff_t *ppos) | |
| { | |
| struct seq_file *s = file->private_data; | |
| struct tb_port *port = s->private; | |
| struct tb_switch *sw = port->sw; | |
| struct tb *tb = sw->tb; | |
| char *buf; | |
| int ret; | |
| buf = validate_and_copy_from_user(user_buf, &count); | |
| if (IS_ERR(buf)) | |
| return PTR_ERR(buf); | |
| pm_runtime_get_sync(&sw->dev); | |
| if (mutex_lock_interruptible(&tb->lock)) { | |
| ret = -ERESTARTSYS; | |
| goto out; | |
| } | |
| ret = sb_regs_write(port, port_sb_regs, ARRAY_SIZE(port_sb_regs), | |
| USB4_SB_TARGET_ROUTER, 0, buf, count, ppos); | |
| mutex_unlock(&tb->lock); | |
| out: | |
| pm_runtime_mark_last_busy(&sw->dev); | |
| pm_runtime_put_autosuspend(&sw->dev); | |
| kfree(buf); | |
| return ret < 0 ? ret : count; | |
| } | |
| static ssize_t retimer_sb_regs_write(struct file *file, | |
| const char __user *user_buf, | |
| size_t count, loff_t *ppos) | |
| { | |
| struct seq_file *s = file->private_data; | |
| struct tb_retimer *rt = s->private; | |
| struct tb *tb = rt->tb; | |
| char *buf; | |
| int ret; | |
| buf = validate_and_copy_from_user(user_buf, &count); | |
| if (IS_ERR(buf)) | |
| return PTR_ERR(buf); | |
| pm_runtime_get_sync(&rt->dev); | |
| if (mutex_lock_interruptible(&tb->lock)) { | |
| ret = -ERESTARTSYS; | |
| goto out; | |
| } | |
| ret = sb_regs_write(rt->port, retimer_sb_regs, ARRAY_SIZE(retimer_sb_regs), | |
| USB4_SB_TARGET_RETIMER, rt->index, buf, count, ppos); | |
| mutex_unlock(&tb->lock); | |
| out: | |
| pm_runtime_mark_last_busy(&rt->dev); | |
| pm_runtime_put_autosuspend(&rt->dev); | |
| kfree(buf); | |
| return ret < 0 ? ret : count; | |
| } | |
| #define DEBUGFS_MODE 0600 | |
| #else | |
| #define port_regs_write NULL | |
| #define path_write NULL | |
| #define switch_regs_write NULL | |
| #define port_sb_regs_write NULL | |
| #define retimer_sb_regs_write NULL | |
| #define DEBUGFS_MODE 0400 | |
| #endif | |
| #if IS_ENABLED(CONFIG_USB4_DEBUGFS_MARGINING) | |
| /** | |
| * struct tb_margining - Lane margining support | |
| * @port: USB4 port through which the margining operations are run | |
| * @target: Sideband target | |
| * @index: Retimer index if taget is %USB4_SB_TARGET_RETIMER | |
| * @dev: Pointer to the device that is the target (USB4 port or retimer) | |
| * @gen: Link generation | |
| * @asym_rx: %true% if @port supports asymmetric link with 3 Rx | |
| * @caps: Port lane margining capabilities | |
| * @results: Last lane margining results | |
| * @lanes: %0, %1 or %7 (all) | |
| * @min_ber_level: Minimum supported BER level contour value | |
| * @max_ber_level: Maximum supported BER level contour value | |
| * @ber_level: Current BER level contour value | |
| * @voltage_steps: Number of mandatory voltage steps | |
| * @max_voltage_offset: Maximum mandatory voltage offset (in mV) | |
| * @voltage_steps_optional_range: Number of voltage steps for optional range | |
| * @max_voltage_offset_optional_range: Maximum voltage offset for the optional | |
| * range (in mV). | |
| * @time_steps: Number of time margin steps | |
| * @max_time_offset: Maximum time margin offset (in mUI) | |
| * @voltage_time_offset: Offset for voltage / time for software margining | |
| * @dwell_time: Dwell time for software margining (in ms) | |
| * @error_counter: Error counter operation for software margining | |
| * @optional_voltage_offset_range: Enable optional extended voltage range | |
| * @software: %true if software margining is used instead of hardware | |
| * @time: %true if time margining is used instead of voltage | |
| * @right_high: %false if left/low margin test is performed, %true if | |
| * right/high | |
| * @upper_eye: %false if the lower PAM3 eye is used, %true if the upper | |
| * eye is used | |
| */ | |
| struct tb_margining { | |
| struct tb_port *port; | |
| enum usb4_sb_target target; | |
| u8 index; | |
| struct device *dev; | |
| unsigned int gen; | |
| bool asym_rx; | |
| u32 caps[3]; | |
| u32 results[3]; | |
| enum usb4_margining_lane lanes; | |
| unsigned int min_ber_level; | |
| unsigned int max_ber_level; | |
| unsigned int ber_level; | |
| unsigned int voltage_steps; | |
| unsigned int max_voltage_offset; | |
| unsigned int voltage_steps_optional_range; | |
| unsigned int max_voltage_offset_optional_range; | |
| unsigned int time_steps; | |
| unsigned int max_time_offset; | |
| unsigned int voltage_time_offset; | |
| unsigned int dwell_time; | |
| enum usb4_margin_sw_error_counter error_counter; | |
| bool optional_voltage_offset_range; | |
| bool software; | |
| bool time; | |
| bool right_high; | |
| bool upper_eye; | |
| }; | |
| static int margining_modify_error_counter(struct tb_margining *margining, | |
| u32 lanes, enum usb4_margin_sw_error_counter error_counter) | |
| { | |
| struct usb4_port_margining_params params = { 0 }; | |
| struct tb_port *port = margining->port; | |
| u32 result; | |
| if (error_counter != USB4_MARGIN_SW_ERROR_COUNTER_CLEAR && | |
| error_counter != USB4_MARGIN_SW_ERROR_COUNTER_STOP) | |
| return -EOPNOTSUPP; | |
| params.error_counter = error_counter; | |
| params.lanes = lanes; | |
| return usb4_port_sw_margin(port, margining->target, margining->index, | |
| ¶ms, &result); | |
| } | |
| static bool supports_software(const struct tb_margining *margining) | |
| { | |
| if (margining->gen < 4) | |
| return margining->caps[0] & USB4_MARGIN_CAP_0_MODES_SW; | |
| return margining->caps[2] & USB4_MARGIN_CAP_2_MODES_SW; | |
| } | |
| static bool supports_hardware(const struct tb_margining *margining) | |
| { | |
| if (margining->gen < 4) | |
| return margining->caps[0] & USB4_MARGIN_CAP_0_MODES_HW; | |
| return margining->caps[2] & USB4_MARGIN_CAP_2_MODES_HW; | |
| } | |
| static bool all_lanes(const struct tb_margining *margining) | |
| { | |
| return margining->caps[0] & USB4_MARGIN_CAP_0_ALL_LANES; | |
| } | |
| static enum usb4_margin_cap_voltage_indp | |
| independent_voltage_margins(const struct tb_margining *margining) | |
| { | |
| if (margining->gen < 4) { | |
| switch (FIELD_GET(USB4_MARGIN_CAP_0_VOLTAGE_INDP_MASK, margining->caps[0])) { | |
| case USB4_MARGIN_CAP_0_VOLTAGE_MIN: | |
| return USB4_MARGIN_CAP_VOLTAGE_INDP_GEN_2_3_MIN; | |
| case USB4_MARGIN_CAP_0_VOLTAGE_HL: | |
| return USB4_MARGIN_CAP_VOLTAGE_INDP_GEN_2_3_HL; | |
| case USB4_MARGIN_CAP_1_TIME_BOTH: | |
| return USB4_MARGIN_CAP_VOLTAGE_INDP_GEN_2_3_BOTH; | |
| } | |
| } else { | |
| switch (FIELD_GET(USB4_MARGIN_CAP_2_VOLTAGE_INDP_MASK, margining->caps[2])) { | |
| case USB4_MARGIN_CAP_2_VOLTAGE_MIN: | |
| return USB4_MARGIN_CAP_VOLTAGE_INDP_GEN_4_MIN; | |
| case USB4_MARGIN_CAP_2_VOLTAGE_BOTH: | |
| return USB4_MARGIN_CAP_VOLTAGE_INDP_GEN_4_BOTH; | |
| } | |
| } | |
| return USB4_MARGIN_CAP_VOLTAGE_INDP_UNKNOWN; | |
| } | |
| static bool supports_time(const struct tb_margining *margining) | |
| { | |
| if (margining->gen < 4) | |
| return margining->caps[0] & USB4_MARGIN_CAP_0_TIME; | |
| return margining->caps[2] & USB4_MARGIN_CAP_2_TIME; | |
| } | |
| /* Only applicable if supports_time() returns true */ | |
| static enum usb4_margin_cap_time_indp | |
| independent_time_margins(const struct tb_margining *margining) | |
| { | |
| if (margining->gen < 4) { | |
| switch (FIELD_GET(USB4_MARGIN_CAP_1_TIME_INDP_MASK, margining->caps[1])) { | |
| case USB4_MARGIN_CAP_1_TIME_MIN: | |
| return USB4_MARGIN_CAP_TIME_INDP_GEN_2_3_MIN; | |
| case USB4_MARGIN_CAP_1_TIME_LR: | |
| return USB4_MARGIN_CAP_TIME_INDP_GEN_2_3_LR; | |
| case USB4_MARGIN_CAP_1_TIME_BOTH: | |
| return USB4_MARGIN_CAP_TIME_INDP_GEN_2_3_BOTH; | |
| } | |
| } else { | |
| switch (FIELD_GET(USB4_MARGIN_CAP_2_TIME_INDP_MASK, margining->caps[2])) { | |
| case USB4_MARGIN_CAP_2_TIME_MIN: | |
| return USB4_MARGIN_CAP_TIME_INDP_GEN_4_MIN; | |
| case USB4_MARGIN_CAP_2_TIME_BOTH: | |
| return USB4_MARGIN_CAP_TIME_INDP_GEN_4_BOTH; | |
| } | |
| } | |
| return USB4_MARGIN_CAP_TIME_INDP_UNKNOWN; | |
| } | |
| static bool | |
| supports_optional_voltage_offset_range(const struct tb_margining *margining) | |
| { | |
| return margining->caps[0] & USB4_MARGIN_CAP_0_OPT_VOLTAGE_SUPPORT; | |
| } | |
| static ssize_t | |
| margining_ber_level_write(struct file *file, const char __user *user_buf, | |
| size_t count, loff_t *ppos) | |
| { | |
| struct seq_file *s = file->private_data; | |
| struct tb_margining *margining = s->private; | |
| struct tb *tb = margining->port->sw->tb; | |
| unsigned int val; | |
| int ret = 0; | |
| char *buf; | |
| if (mutex_lock_interruptible(&tb->lock)) | |
| return -ERESTARTSYS; | |
| if (margining->software) { | |
| ret = -EINVAL; | |
| goto out_unlock; | |
| } | |
| buf = validate_and_copy_from_user(user_buf, &count); | |
| if (IS_ERR(buf)) { | |
| ret = PTR_ERR(buf); | |
| goto out_unlock; | |
| } | |
| buf[count - 1] = '\0'; | |
| ret = kstrtouint(buf, 10, &val); | |
| if (ret) | |
| goto out_free; | |
| if (val < margining->min_ber_level || | |
| val > margining->max_ber_level) { | |
| ret = -EINVAL; | |
| goto out_free; | |
| } | |
| margining->ber_level = val; | |
| out_free: | |
| kfree(buf); | |
| out_unlock: | |
| mutex_unlock(&tb->lock); | |
| return ret < 0 ? ret : count; | |
| } | |
| static void ber_level_show(struct seq_file *s, unsigned int val) | |
| { | |
| if (val % 2) | |
| seq_printf(s, "3 * 1e%d (%u)\n", -12 + (val + 1) / 2, val); | |
| else | |
| seq_printf(s, "1e%d (%u)\n", -12 + val / 2, val); | |
| } | |
| static int margining_ber_level_show(struct seq_file *s, void *not_used) | |
| { | |
| const struct tb_margining *margining = s->private; | |
| if (margining->software) | |
| return -EINVAL; | |
| ber_level_show(s, margining->ber_level); | |
| return 0; | |
| } | |
| DEBUGFS_ATTR_RW(margining_ber_level); | |
| static int margining_caps_show(struct seq_file *s, void *not_used) | |
| { | |
| struct tb_margining *margining = s->private; | |
| struct tb *tb = margining->port->sw->tb; | |
| int ret = 0; | |
| if (mutex_lock_interruptible(&tb->lock)) | |
| return -ERESTARTSYS; | |
| /* Dump the raw caps first */ | |
| for (int i = 0; i < ARRAY_SIZE(margining->caps); i++) | |
| seq_printf(s, "0x%08x\n", margining->caps[i]); | |
| seq_printf(s, "# software margining: %s\n", | |
| str_yes_no(supports_software(margining))); | |
| if (supports_hardware(margining)) { | |
| seq_puts(s, "# hardware margining: yes\n"); | |
| seq_puts(s, "# minimum BER level contour: "); | |
| ber_level_show(s, margining->min_ber_level); | |
| seq_puts(s, "# maximum BER level contour: "); | |
| ber_level_show(s, margining->max_ber_level); | |
| } else { | |
| seq_puts(s, "# hardware margining: no\n"); | |
| } | |
| seq_printf(s, "# all lanes simultaneously: %s\n", | |
| str_yes_no(all_lanes(margining))); | |
| seq_printf(s, "# voltage margin steps: %u\n", | |
| margining->voltage_steps); | |
| seq_printf(s, "# maximum voltage offset: %u mV\n", | |
| margining->max_voltage_offset); | |
| seq_printf(s, "# optional voltage offset range support: %s\n", | |
| str_yes_no(supports_optional_voltage_offset_range(margining))); | |
| if (supports_optional_voltage_offset_range(margining)) { | |
| seq_printf(s, "# voltage margin steps, optional range: %u\n", | |
| margining->voltage_steps_optional_range); | |
| seq_printf(s, "# maximum voltage offset, optional range: %u mV\n", | |
| margining->max_voltage_offset_optional_range); | |
| } | |
| switch (independent_voltage_margins(margining)) { | |
| case USB4_MARGIN_CAP_VOLTAGE_INDP_GEN_2_3_MIN: | |
| seq_puts(s, "# returns minimum between high and low voltage margins\n"); | |
| break; | |
| case USB4_MARGIN_CAP_VOLTAGE_INDP_GEN_2_3_HL: | |
| seq_puts(s, "# returns high or low voltage margin\n"); | |
| break; | |
| case USB4_MARGIN_CAP_VOLTAGE_INDP_GEN_2_3_BOTH: | |
| seq_puts(s, "# returns both high and low margins\n"); | |
| break; | |
| case USB4_MARGIN_CAP_VOLTAGE_INDP_GEN_4_MIN: | |
| seq_puts(s, "# returns minimum between high and low voltage margins in both lower and upper eye\n"); | |
| break; | |
| case USB4_MARGIN_CAP_VOLTAGE_INDP_GEN_4_BOTH: | |
| seq_puts(s, "# returns both high and low margins of both upper and lower eye\n"); | |
| break; | |
| case USB4_MARGIN_CAP_VOLTAGE_INDP_UNKNOWN: | |
| tb_port_warn(margining->port, | |
| "failed to parse independent voltage margining capabilities\n"); | |
| ret = -EIO; | |
| goto out; | |
| } | |
| if (supports_time(margining)) { | |
| seq_puts(s, "# time margining: yes\n"); | |
| seq_printf(s, "# time margining is destructive: %s\n", | |
| str_yes_no(margining->caps[1] & USB4_MARGIN_CAP_1_TIME_DESTR)); | |
| switch (independent_time_margins(margining)) { | |
| case USB4_MARGIN_CAP_TIME_INDP_GEN_2_3_MIN: | |
| seq_puts(s, "# returns minimum between left and right time margins\n"); | |
| break; | |
| case USB4_MARGIN_CAP_TIME_INDP_GEN_2_3_LR: | |
| seq_puts(s, "# returns left or right margin\n"); | |
| break; | |
| case USB4_MARGIN_CAP_TIME_INDP_GEN_2_3_BOTH: | |
| seq_puts(s, "# returns both left and right margins\n"); | |
| break; | |
| case USB4_MARGIN_CAP_TIME_INDP_GEN_4_MIN: | |
| seq_puts(s, "# returns minimum between left and right time margins in both lower and upper eye\n"); | |
| break; | |
| case USB4_MARGIN_CAP_TIME_INDP_GEN_4_BOTH: | |
| seq_puts(s, "# returns both left and right margins of both upper and lower eye\n"); | |
| break; | |
| case USB4_MARGIN_CAP_TIME_INDP_UNKNOWN: | |
| tb_port_warn(margining->port, | |
| "failed to parse independent time margining capabilities\n"); | |
| ret = -EIO; | |
| goto out; | |
| } | |
| seq_printf(s, "# time margin steps: %u\n", | |
| margining->time_steps); | |
| seq_printf(s, "# maximum time offset: %u mUI\n", | |
| margining->max_time_offset); | |
| } else { | |
| seq_puts(s, "# time margining: no\n"); | |
| } | |
| out: | |
| mutex_unlock(&tb->lock); | |
| return ret; | |
| } | |
| DEBUGFS_ATTR_RO(margining_caps); | |
| static const struct { | |
| enum usb4_margining_lane lane; | |
| const char *name; | |
| } lane_names[] = { | |
| { | |
| .lane = USB4_MARGINING_LANE_RX0, | |
| .name = "0", | |
| }, | |
| { | |
| .lane = USB4_MARGINING_LANE_RX1, | |
| .name = "1", | |
| }, | |
| { | |
| .lane = USB4_MARGINING_LANE_RX2, | |
| .name = "2", | |
| }, | |
| { | |
| .lane = USB4_MARGINING_LANE_ALL, | |
| .name = "all", | |
| }, | |
| }; | |
| static ssize_t | |
| margining_lanes_write(struct file *file, const char __user *user_buf, | |
| size_t count, loff_t *ppos) | |
| { | |
| struct seq_file *s = file->private_data; | |
| struct tb_margining *margining = s->private; | |
| struct tb_port *port = margining->port; | |
| struct tb *tb = port->sw->tb; | |
| int lane = -1; | |
| char *buf; | |
| buf = validate_and_copy_from_user(user_buf, &count); | |
| if (IS_ERR(buf)) | |
| return PTR_ERR(buf); | |
| buf[count - 1] = '\0'; | |
| for (int i = 0; i < ARRAY_SIZE(lane_names); i++) { | |
| if (!strcmp(buf, lane_names[i].name)) { | |
| lane = lane_names[i].lane; | |
| break; | |
| } | |
| } | |
| kfree(buf); | |
| if (lane == -1) | |
| return -EINVAL; | |
| scoped_cond_guard(mutex_intr, return -ERESTARTSYS, &tb->lock) { | |
| if (lane == USB4_MARGINING_LANE_ALL && !all_lanes(margining)) | |
| return -EINVAL; | |
| /* | |
| * Enabling on RX2 requires that it is supported by the | |
| * USB4 port. | |
| */ | |
| if (lane == USB4_MARGINING_LANE_RX2 && !margining->asym_rx) | |
| return -EINVAL; | |
| margining->lanes = lane; | |
| } | |
| return count; | |
| } | |
| static int margining_lanes_show(struct seq_file *s, void *not_used) | |
| { | |
| struct tb_margining *margining = s->private; | |
| struct tb_port *port = margining->port; | |
| struct tb *tb = port->sw->tb; | |
| scoped_cond_guard(mutex_intr, return -ERESTARTSYS, &tb->lock) { | |
| for (int i = 0; i < ARRAY_SIZE(lane_names); i++) { | |
| if (lane_names[i].lane == USB4_MARGINING_LANE_ALL && | |
| !all_lanes(margining)) | |
| continue; | |
| if (lane_names[i].lane == USB4_MARGINING_LANE_RX2 && | |
| !margining->asym_rx) | |
| continue; | |
| if (i != 0) | |
| seq_putc(s, ' '); | |
| if (lane_names[i].lane == margining->lanes) | |
| seq_printf(s, "[%s]", lane_names[i].name); | |
| else | |
| seq_printf(s, "%s", lane_names[i].name); | |
| } | |
| seq_puts(s, "\n"); | |
| } | |
| return 0; | |
| } | |
| DEBUGFS_ATTR_RW(margining_lanes); | |
| static ssize_t | |
| margining_voltage_time_offset_write(struct file *file, | |
| const char __user *user_buf, | |
| size_t count, loff_t *ppos) | |
| { | |
| struct seq_file *s = file->private_data; | |
| struct tb_margining *margining = s->private; | |
| struct tb *tb = margining->port->sw->tb; | |
| unsigned int max_margin; | |
| unsigned int val; | |
| int ret; | |
| ret = kstrtouint_from_user(user_buf, count, 10, &val); | |
| if (ret) | |
| return ret; | |
| scoped_cond_guard(mutex_intr, return -ERESTARTSYS, &tb->lock) { | |
| if (!margining->software) | |
| return -EOPNOTSUPP; | |
| if (margining->time) | |
| max_margin = margining->time_steps; | |
| else | |
| if (margining->optional_voltage_offset_range) | |
| max_margin = margining->voltage_steps_optional_range; | |
| else | |
| max_margin = margining->voltage_steps; | |
| margining->voltage_time_offset = clamp(val, 0, max_margin); | |
| } | |
| return count; | |
| } | |
| static int margining_voltage_time_offset_show(struct seq_file *s, | |
| void *not_used) | |
| { | |
| const struct tb_margining *margining = s->private; | |
| struct tb *tb = margining->port->sw->tb; | |
| scoped_cond_guard(mutex_intr, return -ERESTARTSYS, &tb->lock) { | |
| if (!margining->software) | |
| return -EOPNOTSUPP; | |
| seq_printf(s, "%d\n", margining->voltage_time_offset); | |
| } | |
| return 0; | |
| } | |
| DEBUGFS_ATTR_RW(margining_voltage_time_offset); | |
| static ssize_t | |
| margining_error_counter_write(struct file *file, const char __user *user_buf, | |
| size_t count, loff_t *ppos) | |
| { | |
| enum usb4_margin_sw_error_counter error_counter; | |
| struct seq_file *s = file->private_data; | |
| struct tb_margining *margining = s->private; | |
| struct tb *tb = margining->port->sw->tb; | |
| char *buf; | |
| buf = validate_and_copy_from_user(user_buf, &count); | |
| if (IS_ERR(buf)) | |
| return PTR_ERR(buf); | |
| buf[count - 1] = '\0'; | |
| if (!strcmp(buf, "nop")) | |
| error_counter = USB4_MARGIN_SW_ERROR_COUNTER_NOP; | |
| else if (!strcmp(buf, "clear")) | |
| error_counter = USB4_MARGIN_SW_ERROR_COUNTER_CLEAR; | |
| else if (!strcmp(buf, "start")) | |
| error_counter = USB4_MARGIN_SW_ERROR_COUNTER_START; | |
| else if (!strcmp(buf, "stop")) | |
| error_counter = USB4_MARGIN_SW_ERROR_COUNTER_STOP; | |
| else | |
| goto err_free; | |
| kfree(buf); | |
| scoped_cond_guard(mutex_intr, return -ERESTARTSYS, &tb->lock) { | |
| if (!margining->software) | |
| return -EOPNOTSUPP; | |
| margining->error_counter = error_counter; | |
| } | |
| return count; | |
| err_free: | |
| kfree(buf); | |
| return -EINVAL; | |
| } | |
| static int margining_error_counter_show(struct seq_file *s, void *not_used) | |
| { | |
| const struct tb_margining *margining = s->private; | |
| struct tb *tb = margining->port->sw->tb; | |
| scoped_cond_guard(mutex_intr, return -ERESTARTSYS, &tb->lock) { | |
| if (!margining->software) | |
| return -EOPNOTSUPP; | |
| switch (margining->error_counter) { | |
| case USB4_MARGIN_SW_ERROR_COUNTER_NOP: | |
| seq_puts(s, "[nop] clear start stop\n"); | |
| break; | |
| case USB4_MARGIN_SW_ERROR_COUNTER_CLEAR: | |
| seq_puts(s, "nop [clear] start stop\n"); | |
| break; | |
| case USB4_MARGIN_SW_ERROR_COUNTER_START: | |
| seq_puts(s, "nop clear [start] stop\n"); | |
| break; | |
| case USB4_MARGIN_SW_ERROR_COUNTER_STOP: | |
| seq_puts(s, "nop clear start [stop]\n"); | |
| break; | |
| } | |
| } | |
| return 0; | |
| } | |
| DEBUGFS_ATTR_RW(margining_error_counter); | |
| static ssize_t | |
| margining_dwell_time_write(struct file *file, const char __user *user_buf, | |
| size_t count, loff_t *ppos) | |
| { | |
| struct seq_file *s = file->private_data; | |
| struct tb_margining *margining = s->private; | |
| struct tb *tb = margining->port->sw->tb; | |
| unsigned int val; | |
| int ret; | |
| ret = kstrtouint_from_user(user_buf, count, 10, &val); | |
| if (ret) | |
| return ret; | |
| scoped_cond_guard(mutex_intr, return -ERESTARTSYS, &tb->lock) { | |
| if (!margining->software) | |
| return -EOPNOTSUPP; | |
| margining->dwell_time = clamp(val, MIN_DWELL_TIME, MAX_DWELL_TIME); | |
| } | |
| return count; | |
| } | |
| static int margining_dwell_time_show(struct seq_file *s, void *not_used) | |
| { | |
| struct tb_margining *margining = s->private; | |
| struct tb *tb = margining->port->sw->tb; | |
| scoped_cond_guard(mutex_intr, return -ERESTARTSYS, &tb->lock) { | |
| if (!margining->software) | |
| return -EOPNOTSUPP; | |
| seq_printf(s, "%d\n", margining->dwell_time); | |
| } | |
| return 0; | |
| } | |
| DEBUGFS_ATTR_RW(margining_dwell_time); | |
| static ssize_t | |
| margining_optional_voltage_offset_write(struct file *file, const char __user *user_buf, | |
| size_t count, loff_t *ppos) | |
| { | |
| struct seq_file *s = file->private_data; | |
| struct tb_margining *margining = s->private; | |
| struct tb *tb = margining->port->sw->tb; | |
| bool val; | |
| int ret; | |
| ret = kstrtobool_from_user(user_buf, count, &val); | |
| if (ret) | |
| return ret; | |
| scoped_cond_guard(mutex_intr, return -ERESTARTSYS, &tb->lock) { | |
| margining->optional_voltage_offset_range = val; | |
| } | |
| return count; | |
| } | |
| static int margining_optional_voltage_offset_show(struct seq_file *s, | |
| void *not_used) | |
| { | |
| struct tb_margining *margining = s->private; | |
| struct tb *tb = margining->port->sw->tb; | |
| scoped_cond_guard(mutex_intr, return -ERESTARTSYS, &tb->lock) { | |
| seq_printf(s, "%u\n", margining->optional_voltage_offset_range); | |
| } | |
| return 0; | |
| } | |
| DEBUGFS_ATTR_RW(margining_optional_voltage_offset); | |
| static ssize_t margining_mode_write(struct file *file, | |
| const char __user *user_buf, | |
| size_t count, loff_t *ppos) | |
| { | |
| struct seq_file *s = file->private_data; | |
| struct tb_margining *margining = s->private; | |
| struct tb *tb = margining->port->sw->tb; | |
| int ret = 0; | |
| char *buf; | |
| buf = validate_and_copy_from_user(user_buf, &count); | |
| if (IS_ERR(buf)) | |
| return PTR_ERR(buf); | |
| buf[count - 1] = '\0'; | |
| if (mutex_lock_interruptible(&tb->lock)) { | |
| ret = -ERESTARTSYS; | |
| goto out_free; | |
| } | |
| if (!strcmp(buf, "software")) { | |
| if (supports_software(margining)) | |
| margining->software = true; | |
| else | |
| ret = -EINVAL; | |
| } else if (!strcmp(buf, "hardware")) { | |
| if (supports_hardware(margining)) | |
| margining->software = false; | |
| else | |
| ret = -EINVAL; | |
| } else { | |
| ret = -EINVAL; | |
| } | |
| mutex_unlock(&tb->lock); | |
| out_free: | |
| kfree(buf); | |
| return ret ? ret : count; | |
| } | |
| static int margining_mode_show(struct seq_file *s, void *not_used) | |
| { | |
| struct tb_margining *margining = s->private; | |
| struct tb *tb = margining->port->sw->tb; | |
| const char *space = ""; | |
| if (mutex_lock_interruptible(&tb->lock)) | |
| return -ERESTARTSYS; | |
| if (supports_software(margining)) { | |
| if (margining->software) | |
| seq_puts(s, "[software]"); | |
| else | |
| seq_puts(s, "software"); | |
| space = " "; | |
| } | |
| if (supports_hardware(margining)) { | |
| if (margining->software) | |
| seq_printf(s, "%shardware", space); | |
| else | |
| seq_printf(s, "%s[hardware]", space); | |
| } | |
| mutex_unlock(&tb->lock); | |
| seq_puts(s, "\n"); | |
| return 0; | |
| } | |
| DEBUGFS_ATTR_RW(margining_mode); | |
| static int margining_run_sw(struct tb_margining *margining, | |
| struct usb4_port_margining_params *params) | |
| { | |
| u32 nsamples = margining->dwell_time / DWELL_SAMPLE_INTERVAL; | |
| int ret, i; | |
| ret = usb4_port_sw_margin(margining->port, margining->target, margining->index, | |
| params, margining->results); | |
| if (ret) | |
| goto out_stop; | |
| for (i = 0; i <= nsamples; i++) { | |
| u32 errors = 0; | |
| ret = usb4_port_sw_margin_errors(margining->port, margining->target, | |
| margining->index, &margining->results[1]); | |
| if (ret) | |
| break; | |
| if (margining->lanes == USB4_MARGINING_LANE_RX0) | |
| errors = FIELD_GET(USB4_MARGIN_SW_ERR_COUNTER_LANE_0_MASK, | |
| margining->results[1]); | |
| else if (margining->lanes == USB4_MARGINING_LANE_RX1) | |
| errors = FIELD_GET(USB4_MARGIN_SW_ERR_COUNTER_LANE_1_MASK, | |
| margining->results[1]); | |
| else if (margining->lanes == USB4_MARGINING_LANE_RX2) | |
| errors = FIELD_GET(USB4_MARGIN_SW_ERR_COUNTER_LANE_2_MASK, | |
| margining->results[1]); | |
| else if (margining->lanes == USB4_MARGINING_LANE_ALL) | |
| errors = margining->results[1]; | |
| /* Any errors stop the test */ | |
| if (errors) | |
| break; | |
| fsleep(DWELL_SAMPLE_INTERVAL * USEC_PER_MSEC); | |
| } | |
| out_stop: | |
| /* | |
| * Stop the counters but don't clear them to allow the | |
| * different error counter configurations. | |
| */ | |
| margining_modify_error_counter(margining, margining->lanes, | |
| USB4_MARGIN_SW_ERROR_COUNTER_STOP); | |
| return ret; | |
| } | |
| static int validate_margining(struct tb_margining *margining) | |
| { | |
| /* | |
| * For running on RX2 the link must be asymmetric with 3 | |
| * receivers. Because this can change dynamically, check it | |
| * here before we start the margining and report back error if | |
| * expectations are not met. | |
| */ | |
| if (margining->lanes == USB4_MARGINING_LANE_RX2) { | |
| int ret; | |
| ret = tb_port_get_link_width(margining->port); | |
| if (ret < 0) | |
| return ret; | |
| if (ret != TB_LINK_WIDTH_ASYM_RX) { | |
| tb_port_warn(margining->port, "link is %s expected %s", | |
| tb_width_name(ret), | |
| tb_width_name(TB_LINK_WIDTH_ASYM_RX)); | |
| return -EINVAL; | |
| } | |
| } | |
| return 0; | |
| } | |
| static int margining_run_write(void *data, u64 val) | |
| { | |
| struct tb_margining *margining = data; | |
| struct tb_port *port = margining->port; | |
| struct device *dev = margining->dev; | |
| struct tb_switch *sw = port->sw; | |
| struct tb_switch *down_sw; | |
| struct tb *tb = sw->tb; | |
| int ret, clx; | |
| if (val != 1) | |
| return -EINVAL; | |
| pm_runtime_get_sync(dev); | |
| if (mutex_lock_interruptible(&tb->lock)) { | |
| ret = -ERESTARTSYS; | |
| goto out_rpm_put; | |
| } | |
| ret = validate_margining(margining); | |
| if (ret) | |
| goto out_unlock; | |
| if (tb_is_upstream_port(port)) | |
| down_sw = sw; | |
| else if (port->remote) | |
| down_sw = port->remote->sw; | |
| else | |
| down_sw = NULL; | |
| if (down_sw) { | |
| /* | |
| * CL states may interfere with lane margining so | |
| * disable them temporarily now. | |
| */ | |
| ret = tb_switch_clx_disable(down_sw); | |
| if (ret < 0) { | |
| tb_sw_warn(down_sw, "failed to disable CL states\n"); | |
| goto out_unlock; | |
| } | |
| clx = ret; | |
| } | |
| /* Clear the results */ | |
| memset(margining->results, 0, sizeof(margining->results)); | |
| if (margining->software) { | |
| struct usb4_port_margining_params params = { | |
| .error_counter = USB4_MARGIN_SW_ERROR_COUNTER_CLEAR, | |
| .lanes = margining->lanes, | |
| .time = margining->time, | |
| .voltage_time_offset = margining->voltage_time_offset, | |
| .right_high = margining->right_high, | |
| .upper_eye = margining->upper_eye, | |
| .optional_voltage_offset_range = margining->optional_voltage_offset_range, | |
| }; | |
| tb_port_dbg(port, | |
| "running software %s lane margining for %s lanes %u\n", | |
| margining->time ? "time" : "voltage", dev_name(dev), | |
| margining->lanes); | |
| ret = margining_run_sw(margining, ¶ms); | |
| } else { | |
| struct usb4_port_margining_params params = { | |
| .ber_level = margining->ber_level, | |
| .lanes = margining->lanes, | |
| .time = margining->time, | |
| .right_high = margining->right_high, | |
| .upper_eye = margining->upper_eye, | |
| .optional_voltage_offset_range = margining->optional_voltage_offset_range, | |
| }; | |
| tb_port_dbg(port, | |
| "running hardware %s lane margining for %s lanes %u\n", | |
| margining->time ? "time" : "voltage", dev_name(dev), | |
| margining->lanes); | |
| ret = usb4_port_hw_margin(port, margining->target, margining->index, ¶ms, | |
| margining->results, ARRAY_SIZE(margining->results)); | |
| } | |
| if (down_sw) | |
| tb_switch_clx_enable(down_sw, clx); | |
| out_unlock: | |
| mutex_unlock(&tb->lock); | |
| out_rpm_put: | |
| pm_runtime_mark_last_busy(dev); | |
| pm_runtime_put_autosuspend(dev); | |
| return ret; | |
| } | |
| DEFINE_DEBUGFS_ATTRIBUTE(margining_run_fops, NULL, margining_run_write, | |
| "%llu\n"); | |
| static ssize_t margining_results_write(struct file *file, | |
| const char __user *user_buf, | |
| size_t count, loff_t *ppos) | |
| { | |
| struct seq_file *s = file->private_data; | |
| struct tb_margining *margining = s->private; | |
| struct tb *tb = margining->port->sw->tb; | |
| if (mutex_lock_interruptible(&tb->lock)) | |
| return -ERESTARTSYS; | |
| /* Just clear the results */ | |
| memset(margining->results, 0, sizeof(margining->results)); | |
| if (margining->software) { | |
| /* Clear the error counters */ | |
| margining_modify_error_counter(margining, | |
| USB4_MARGINING_LANE_ALL, | |
| USB4_MARGIN_SW_ERROR_COUNTER_CLEAR); | |
| } | |
| mutex_unlock(&tb->lock); | |
| return count; | |
| } | |
| static void voltage_margin_show(struct seq_file *s, | |
| const struct tb_margining *margining, u8 val) | |
| { | |
| unsigned int tmp, voltage; | |
| tmp = FIELD_GET(USB4_MARGIN_HW_RES_MARGIN_MASK, val); | |
| voltage = tmp * margining->max_voltage_offset / margining->voltage_steps; | |
| seq_printf(s, "%u mV (%u)", voltage, tmp); | |
| if (val & USB4_MARGIN_HW_RES_EXCEEDS) | |
| seq_puts(s, " exceeds maximum"); | |
| seq_puts(s, "\n"); | |
| if (margining->optional_voltage_offset_range) | |
| seq_puts(s, " optional voltage offset range enabled\n"); | |
| } | |
| static void time_margin_show(struct seq_file *s, | |
| const struct tb_margining *margining, u8 val) | |
| { | |
| unsigned int tmp, interval; | |
| tmp = FIELD_GET(USB4_MARGIN_HW_RES_MARGIN_MASK, val); | |
| interval = tmp * margining->max_time_offset / margining->time_steps; | |
| seq_printf(s, "%u mUI (%u)", interval, tmp); | |
| if (val & USB4_MARGIN_HW_RES_EXCEEDS) | |
| seq_puts(s, " exceeds maximum"); | |
| seq_puts(s, "\n"); | |
| } | |
| static u8 margining_hw_result_val(const u32 *results, | |
| enum usb4_margining_lane lane, | |
| bool right_high) | |
| { | |
| u32 val; | |
| if (lane == USB4_MARGINING_LANE_RX0) | |
| val = results[1]; | |
| else if (lane == USB4_MARGINING_LANE_RX1) | |
| val = results[1] >> USB4_MARGIN_HW_RES_LANE_SHIFT; | |
| else if (lane == USB4_MARGINING_LANE_RX2) | |
| val = results[2]; | |
| else | |
| val = 0; | |
| return right_high ? val : val >> USB4_MARGIN_HW_RES_LL_SHIFT; | |
| } | |
| static void margining_hw_result_format(struct seq_file *s, | |
| const struct tb_margining *margining, | |
| enum usb4_margining_lane lane) | |
| { | |
| u8 val; | |
| if (margining->time) { | |
| val = margining_hw_result_val(margining->results, lane, true); | |
| seq_printf(s, "# lane %u right time margin: ", lane); | |
| time_margin_show(s, margining, val); | |
| val = margining_hw_result_val(margining->results, lane, false); | |
| seq_printf(s, "# lane %u left time margin: ", lane); | |
| time_margin_show(s, margining, val); | |
| } else { | |
| val = margining_hw_result_val(margining->results, lane, true); | |
| seq_printf(s, "# lane %u high voltage margin: ", lane); | |
| voltage_margin_show(s, margining, val); | |
| val = margining_hw_result_val(margining->results, lane, false); | |
| seq_printf(s, "# lane %u low voltage margin: ", lane); | |
| voltage_margin_show(s, margining, val); | |
| } | |
| } | |
| static int margining_results_show(struct seq_file *s, void *not_used) | |
| { | |
| struct tb_margining *margining = s->private; | |
| struct tb *tb = margining->port->sw->tb; | |
| if (mutex_lock_interruptible(&tb->lock)) | |
| return -ERESTARTSYS; | |
| /* Dump the raw results first */ | |
| seq_printf(s, "0x%08x\n", margining->results[0]); | |
| /* Only the hardware margining has two result dwords */ | |
| if (!margining->software) { | |
| for (int i = 1; i < ARRAY_SIZE(margining->results); i++) | |
| seq_printf(s, "0x%08x\n", margining->results[i]); | |
| if (margining->lanes == USB4_MARGINING_LANE_ALL) { | |
| margining_hw_result_format(s, margining, | |
| USB4_MARGINING_LANE_RX0); | |
| margining_hw_result_format(s, margining, | |
| USB4_MARGINING_LANE_RX1); | |
| if (margining->asym_rx) | |
| margining_hw_result_format(s, margining, | |
| USB4_MARGINING_LANE_RX2); | |
| } else { | |
| margining_hw_result_format(s, margining, | |
| margining->lanes); | |
| } | |
| } else { | |
| u32 lane_errors, result; | |
| seq_printf(s, "0x%08x\n", margining->results[1]); | |
| result = FIELD_GET(USB4_MARGIN_SW_LANES_MASK, margining->results[0]); | |
| if (result == USB4_MARGINING_LANE_RX0 || | |
| result == USB4_MARGINING_LANE_ALL) { | |
| lane_errors = FIELD_GET(USB4_MARGIN_SW_ERR_COUNTER_LANE_0_MASK, | |
| margining->results[1]); | |
| seq_printf(s, "# lane 0 errors: %u\n", lane_errors); | |
| } | |
| if (result == USB4_MARGINING_LANE_RX1 || | |
| result == USB4_MARGINING_LANE_ALL) { | |
| lane_errors = FIELD_GET(USB4_MARGIN_SW_ERR_COUNTER_LANE_1_MASK, | |
| margining->results[1]); | |
| seq_printf(s, "# lane 1 errors: %u\n", lane_errors); | |
| } | |
| if (margining->asym_rx && | |
| (result == USB4_MARGINING_LANE_RX2 || | |
| result == USB4_MARGINING_LANE_ALL)) { | |
| lane_errors = FIELD_GET(USB4_MARGIN_SW_ERR_COUNTER_LANE_2_MASK, | |
| margining->results[1]); | |
| seq_printf(s, "# lane 2 errors: %u\n", lane_errors); | |
| } | |
| } | |
| mutex_unlock(&tb->lock); | |
| return 0; | |
| } | |
| DEBUGFS_ATTR_RW(margining_results); | |
| static ssize_t margining_test_write(struct file *file, | |
| const char __user *user_buf, | |
| size_t count, loff_t *ppos) | |
| { | |
| struct seq_file *s = file->private_data; | |
| struct tb_margining *margining = s->private; | |
| struct tb *tb = margining->port->sw->tb; | |
| int ret = 0; | |
| char *buf; | |
| buf = validate_and_copy_from_user(user_buf, &count); | |
| if (IS_ERR(buf)) | |
| return PTR_ERR(buf); | |
| buf[count - 1] = '\0'; | |
| if (mutex_lock_interruptible(&tb->lock)) { | |
| ret = -ERESTARTSYS; | |
| goto out_free; | |
| } | |
| if (!strcmp(buf, "time") && supports_time(margining)) | |
| margining->time = true; | |
| else if (!strcmp(buf, "voltage")) | |
| margining->time = false; | |
| else | |
| ret = -EINVAL; | |
| mutex_unlock(&tb->lock); | |
| out_free: | |
| kfree(buf); | |
| return ret ? ret : count; | |
| } | |
| static int margining_test_show(struct seq_file *s, void *not_used) | |
| { | |
| struct tb_margining *margining = s->private; | |
| struct tb *tb = margining->port->sw->tb; | |
| if (mutex_lock_interruptible(&tb->lock)) | |
| return -ERESTARTSYS; | |
| if (supports_time(margining)) { | |
| if (margining->time) | |
| seq_puts(s, "voltage [time]\n"); | |
| else | |
| seq_puts(s, "[voltage] time\n"); | |
| } else { | |
| seq_puts(s, "[voltage]\n"); | |
| } | |
| mutex_unlock(&tb->lock); | |
| return 0; | |
| } | |
| DEBUGFS_ATTR_RW(margining_test); | |
| static ssize_t margining_margin_write(struct file *file, | |
| const char __user *user_buf, | |
| size_t count, loff_t *ppos) | |
| { | |
| struct seq_file *s = file->private_data; | |
| struct tb_margining *margining = s->private; | |
| struct tb *tb = margining->port->sw->tb; | |
| int ret = 0; | |
| char *buf; | |
| buf = validate_and_copy_from_user(user_buf, &count); | |
| if (IS_ERR(buf)) | |
| return PTR_ERR(buf); | |
| buf[count - 1] = '\0'; | |
| if (mutex_lock_interruptible(&tb->lock)) { | |
| ret = -ERESTARTSYS; | |
| goto out_free; | |
| } | |
| if (margining->time) { | |
| if (!strcmp(buf, "left")) | |
| margining->right_high = false; | |
| else if (!strcmp(buf, "right")) | |
| margining->right_high = true; | |
| else | |
| ret = -EINVAL; | |
| } else { | |
| if (!strcmp(buf, "low")) | |
| margining->right_high = false; | |
| else if (!strcmp(buf, "high")) | |
| margining->right_high = true; | |
| else | |
| ret = -EINVAL; | |
| } | |
| mutex_unlock(&tb->lock); | |
| out_free: | |
| kfree(buf); | |
| return ret ? ret : count; | |
| } | |
| static int margining_margin_show(struct seq_file *s, void *not_used) | |
| { | |
| struct tb_margining *margining = s->private; | |
| struct tb *tb = margining->port->sw->tb; | |
| if (mutex_lock_interruptible(&tb->lock)) | |
| return -ERESTARTSYS; | |
| if (margining->time) { | |
| if (margining->right_high) | |
| seq_puts(s, "left [right]\n"); | |
| else | |
| seq_puts(s, "[left] right\n"); | |
| } else { | |
| if (margining->right_high) | |
| seq_puts(s, "low [high]\n"); | |
| else | |
| seq_puts(s, "[low] high\n"); | |
| } | |
| mutex_unlock(&tb->lock); | |
| return 0; | |
| } | |
| DEBUGFS_ATTR_RW(margining_margin); | |
| static ssize_t margining_eye_write(struct file *file, | |
| const char __user *user_buf, | |
| size_t count, loff_t *ppos) | |
| { | |
| struct seq_file *s = file->private_data; | |
| struct tb_port *port = s->private; | |
| struct usb4_port *usb4 = port->usb4; | |
| struct tb *tb = port->sw->tb; | |
| int ret = 0; | |
| char *buf; | |
| buf = validate_and_copy_from_user(user_buf, &count); | |
| if (IS_ERR(buf)) | |
| return PTR_ERR(buf); | |
| buf[count - 1] = '\0'; | |
| scoped_cond_guard(mutex_intr, ret = -ERESTARTSYS, &tb->lock) { | |
| if (!strcmp(buf, "lower")) | |
| usb4->margining->upper_eye = false; | |
| else if (!strcmp(buf, "upper")) | |
| usb4->margining->upper_eye = true; | |
| else | |
| ret = -EINVAL; | |
| } | |
| kfree(buf); | |
| return ret ? ret : count; | |
| } | |
| static int margining_eye_show(struct seq_file *s, void *not_used) | |
| { | |
| struct tb_port *port = s->private; | |
| struct usb4_port *usb4 = port->usb4; | |
| struct tb *tb = port->sw->tb; | |
| scoped_guard(mutex_intr, &tb->lock) { | |
| if (usb4->margining->upper_eye) | |
| seq_puts(s, "lower [upper]\n"); | |
| else | |
| seq_puts(s, "[lower] upper\n"); | |
| return 0; | |
| } | |
| return -ERESTARTSYS; | |
| } | |
| DEBUGFS_ATTR_RW(margining_eye); | |
| static struct tb_margining *margining_alloc(struct tb_port *port, | |
| struct device *dev, | |
| enum usb4_sb_target target, | |
| u8 index, struct dentry *parent) | |
| { | |
| struct tb_margining *margining; | |
| struct dentry *dir; | |
| unsigned int val; | |
| int ret; | |
| ret = tb_port_get_link_generation(port); | |
| if (ret < 0) { | |
| tb_port_warn(port, "failed to read link generation\n"); | |
| return NULL; | |
| } | |
| margining = kzalloc_obj(*margining); | |
| if (!margining) | |
| return NULL; | |
| margining->port = port; | |
| margining->target = target; | |
| margining->index = index; | |
| margining->dev = dev; | |
| margining->gen = ret; | |
| margining->asym_rx = tb_port_width_supported(port, TB_LINK_WIDTH_ASYM_RX); | |
| ret = usb4_port_margining_caps(port, target, index, margining->caps, | |
| ARRAY_SIZE(margining->caps)); | |
| if (ret) { | |
| kfree(margining); | |
| return NULL; | |
| } | |
| /* Set the initial mode */ | |
| if (supports_software(margining)) | |
| margining->software = true; | |
| if (margining->gen < 4) { | |
| val = FIELD_GET(USB4_MARGIN_CAP_0_VOLTAGE_STEPS_MASK, margining->caps[0]); | |
| margining->voltage_steps = val; | |
| val = FIELD_GET(USB4_MARGIN_CAP_0_MAX_VOLTAGE_OFFSET_MASK, margining->caps[0]); | |
| margining->max_voltage_offset = 74 + val * 2; | |
| } else { | |
| val = FIELD_GET(USB4_MARGIN_CAP_2_VOLTAGE_STEPS_MASK, margining->caps[2]); | |
| margining->voltage_steps = val; | |
| val = FIELD_GET(USB4_MARGIN_CAP_2_MAX_VOLTAGE_OFFSET_MASK, margining->caps[2]); | |
| margining->max_voltage_offset = 74 + val * 2; | |
| } | |
| if (supports_optional_voltage_offset_range(margining)) { | |
| val = FIELD_GET(USB4_MARGIN_CAP_0_VOLT_STEPS_OPT_MASK, | |
| margining->caps[0]); | |
| margining->voltage_steps_optional_range = val; | |
| val = FIELD_GET(USB4_MARGIN_CAP_1_MAX_VOLT_OFS_OPT_MASK, | |
| margining->caps[1]); | |
| margining->max_voltage_offset_optional_range = 74 + val * 2; | |
| } | |
| if (supports_time(margining)) { | |
| val = FIELD_GET(USB4_MARGIN_CAP_1_TIME_STEPS_MASK, margining->caps[1]); | |
| margining->time_steps = val; | |
| val = FIELD_GET(USB4_MARGIN_CAP_1_TIME_OFFSET_MASK, margining->caps[1]); | |
| /* | |
| * Store it as mUI (milli Unit Interval) because we want | |
| * to keep it as integer. | |
| */ | |
| margining->max_time_offset = 200 + 10 * val; | |
| } | |
| dir = debugfs_create_dir("margining", parent); | |
| if (supports_hardware(margining)) { | |
| val = FIELD_GET(USB4_MARGIN_CAP_1_MIN_BER_MASK, margining->caps[1]); | |
| margining->min_ber_level = val; | |
| val = FIELD_GET(USB4_MARGIN_CAP_1_MAX_BER_MASK, margining->caps[1]); | |
| margining->max_ber_level = val; | |
| /* Set the default to minimum */ | |
| margining->ber_level = margining->min_ber_level; | |
| debugfs_create_file("ber_level_contour", 0400, dir, margining, | |
| &margining_ber_level_fops); | |
| } | |
| debugfs_create_file("caps", 0400, dir, margining, &margining_caps_fops); | |
| debugfs_create_file("lanes", 0600, dir, margining, &margining_lanes_fops); | |
| debugfs_create_file("mode", 0600, dir, margining, &margining_mode_fops); | |
| debugfs_create_file("run", 0600, dir, margining, &margining_run_fops); | |
| debugfs_create_file("results", 0600, dir, margining, | |
| &margining_results_fops); | |
| debugfs_create_file("test", 0600, dir, margining, &margining_test_fops); | |
| if (independent_voltage_margins(margining) == USB4_MARGIN_CAP_VOLTAGE_INDP_GEN_2_3_HL || | |
| (supports_time(margining) && | |
| independent_time_margins(margining) == USB4_MARGIN_CAP_TIME_INDP_GEN_2_3_LR)) | |
| debugfs_create_file("margin", 0600, dir, margining, &margining_margin_fops); | |
| margining->error_counter = USB4_MARGIN_SW_ERROR_COUNTER_CLEAR; | |
| margining->dwell_time = MIN_DWELL_TIME; | |
| if (supports_optional_voltage_offset_range(margining)) | |
| debugfs_create_file("optional_voltage_offset", DEBUGFS_MODE, dir, margining, | |
| &margining_optional_voltage_offset_fops); | |
| if (supports_software(margining)) { | |
| debugfs_create_file("voltage_time_offset", DEBUGFS_MODE, dir, margining, | |
| &margining_voltage_time_offset_fops); | |
| debugfs_create_file("error_counter", DEBUGFS_MODE, dir, margining, | |
| &margining_error_counter_fops); | |
| debugfs_create_file("dwell_time", DEBUGFS_MODE, dir, margining, | |
| &margining_dwell_time_fops); | |
| } | |
| if (margining->gen >= 4) | |
| debugfs_create_file("eye", 0600, dir, port, &margining_eye_fops); | |
| return margining; | |
| } | |
| static void margining_port_init(struct tb_port *port) | |
| { | |
| struct dentry *parent; | |
| char dir_name[10]; | |
| if (!port->usb4) | |
| return; | |
| snprintf(dir_name, sizeof(dir_name), "port%d", port->port); | |
| parent = debugfs_lookup(dir_name, port->sw->debugfs_dir); | |
| port->usb4->margining = margining_alloc(port, &port->usb4->dev, | |
| USB4_SB_TARGET_ROUTER, 0, | |
| parent); | |
| } | |
| static void margining_port_remove(struct tb_port *port) | |
| { | |
| struct dentry *parent; | |
| char dir_name[10]; | |
| if (!port->usb4) | |
| return; | |
| if (!port->usb4->margining) | |
| return; | |
| snprintf(dir_name, sizeof(dir_name), "port%d", port->port); | |
| parent = debugfs_lookup(dir_name, port->sw->debugfs_dir); | |
| if (parent) | |
| debugfs_lookup_and_remove("margining", parent); | |
| kfree(port->usb4->margining); | |
| port->usb4->margining = NULL; | |
| } | |
| static void margining_switch_init(struct tb_switch *sw) | |
| { | |
| struct tb_port *upstream, *downstream; | |
| struct tb_switch *parent_sw; | |
| u64 route = tb_route(sw); | |
| if (!route) | |
| return; | |
| upstream = tb_upstream_port(sw); | |
| parent_sw = tb_switch_parent(sw); | |
| downstream = tb_port_at(route, parent_sw); | |
| margining_port_init(downstream); | |
| margining_port_init(upstream); | |
| } | |
| static void margining_switch_remove(struct tb_switch *sw) | |
| { | |
| struct tb_port *upstream, *downstream; | |
| struct tb_switch *parent_sw; | |
| u64 route = tb_route(sw); | |
| if (!route) | |
| return; | |
| upstream = tb_upstream_port(sw); | |
| parent_sw = tb_switch_parent(sw); | |
| downstream = tb_port_at(route, parent_sw); | |
| margining_port_remove(upstream); | |
| margining_port_remove(downstream); | |
| } | |
| static void margining_xdomain_init(struct tb_xdomain *xd) | |
| { | |
| struct tb_switch *parent_sw; | |
| struct tb_port *downstream; | |
| parent_sw = tb_xdomain_parent(xd); | |
| downstream = tb_port_at(xd->route, parent_sw); | |
| margining_port_init(downstream); | |
| } | |
| static void margining_xdomain_remove(struct tb_xdomain *xd) | |
| { | |
| struct tb_switch *parent_sw; | |
| struct tb_port *downstream; | |
| parent_sw = tb_xdomain_parent(xd); | |
| downstream = tb_port_at(xd->route, parent_sw); | |
| margining_port_remove(downstream); | |
| } | |
| static void margining_retimer_init(struct tb_retimer *rt, struct dentry *debugfs_dir) | |
| { | |
| rt->margining = margining_alloc(rt->port, &rt->dev, | |
| USB4_SB_TARGET_RETIMER, rt->index, | |
| debugfs_dir); | |
| } | |
| static void margining_retimer_remove(struct tb_retimer *rt) | |
| { | |
| kfree(rt->margining); | |
| rt->margining = NULL; | |
| } | |
| #else | |
| static inline void margining_switch_init(struct tb_switch *sw) { } | |
| static inline void margining_switch_remove(struct tb_switch *sw) { } | |
| static inline void margining_xdomain_init(struct tb_xdomain *xd) { } | |
| static inline void margining_xdomain_remove(struct tb_xdomain *xd) { } | |
| static inline void margining_retimer_init(struct tb_retimer *rt, | |
| struct dentry *debugfs_dir) { } | |
| static inline void margining_retimer_remove(struct tb_retimer *rt) { } | |
| #endif | |
| static int port_clear_all_counters(struct tb_port *port) | |
| { | |
| u32 *buf; | |
| int ret; | |
| buf = kcalloc(COUNTER_SET_LEN * port->config.max_counters, sizeof(u32), | |
| GFP_KERNEL); | |
| if (!buf) | |
| return -ENOMEM; | |
| ret = tb_port_write(port, buf, TB_CFG_COUNTERS, 0, | |
| COUNTER_SET_LEN * port->config.max_counters); | |
| kfree(buf); | |
| return ret; | |
| } | |
| static ssize_t counters_write(struct file *file, const char __user *user_buf, | |
| size_t count, loff_t *ppos) | |
| { | |
| struct seq_file *s = file->private_data; | |
| struct tb_port *port = s->private; | |
| struct tb_switch *sw = port->sw; | |
| struct tb *tb = port->sw->tb; | |
| char *buf; | |
| int ret; | |
| buf = validate_and_copy_from_user(user_buf, &count); | |
| if (IS_ERR(buf)) | |
| return PTR_ERR(buf); | |
| pm_runtime_get_sync(&sw->dev); | |
| if (mutex_lock_interruptible(&tb->lock)) { | |
| ret = -ERESTARTSYS; | |
| goto out; | |
| } | |
| /* If written delimiter only, clear all counters in one shot */ | |
| if (buf[0] == '\n') { | |
| ret = port_clear_all_counters(port); | |
| } else { | |
| char *line = buf; | |
| u32 val, offset; | |
| ret = -EINVAL; | |
| while (parse_line(&line, &offset, &val, 1, 4)) { | |
| ret = tb_port_write(port, &val, TB_CFG_COUNTERS, | |
| offset, 1); | |
| if (ret) | |
| break; | |
| } | |
| } | |
| mutex_unlock(&tb->lock); | |
| out: | |
| pm_runtime_mark_last_busy(&sw->dev); | |
| pm_runtime_put_autosuspend(&sw->dev); | |
| kfree(buf); | |
| return ret < 0 ? ret : count; | |
| } | |
| static void cap_show_by_dw(struct seq_file *s, struct tb_switch *sw, | |
| struct tb_port *port, unsigned int cap, | |
| unsigned int offset, u8 cap_id, u8 vsec_id, | |
| int dwords) | |
| { | |
| int i, ret; | |
| u32 data; | |
| for (i = 0; i < dwords; i++) { | |
| if (port) | |
| ret = tb_port_read(port, &data, TB_CFG_PORT, cap + offset + i, 1); | |
| else | |
| ret = tb_sw_read(sw, &data, TB_CFG_SWITCH, cap + offset + i, 1); | |
| if (ret) { | |
| seq_printf(s, "0x%04x <not accessible>\n", cap + offset + i); | |
| continue; | |
| } | |
| seq_printf(s, "0x%04x %4d 0x%02x 0x%02x 0x%08x\n", cap + offset + i, | |
| offset + i, cap_id, vsec_id, data); | |
| } | |
| } | |
| static void cap_show(struct seq_file *s, struct tb_switch *sw, | |
| struct tb_port *port, unsigned int cap, u8 cap_id, | |
| u8 vsec_id, int length) | |
| { | |
| int ret, offset = 0; | |
| while (length > 0) { | |
| int i, dwords = min(length, TB_MAX_CONFIG_RW_LENGTH); | |
| u32 data[TB_MAX_CONFIG_RW_LENGTH]; | |
| if (port) | |
| ret = tb_port_read(port, data, TB_CFG_PORT, cap + offset, | |
| dwords); | |
| else | |
| ret = tb_sw_read(sw, data, TB_CFG_SWITCH, cap + offset, dwords); | |
| if (ret) { | |
| cap_show_by_dw(s, sw, port, cap, offset, cap_id, vsec_id, length); | |
| return; | |
| } | |
| for (i = 0; i < dwords; i++) { | |
| seq_printf(s, "0x%04x %4d 0x%02x 0x%02x 0x%08x\n", | |
| cap + offset + i, offset + i, | |
| cap_id, vsec_id, data[i]); | |
| } | |
| length -= dwords; | |
| offset += dwords; | |
| } | |
| } | |
| static void port_cap_show(struct tb_port *port, struct seq_file *s, | |
| unsigned int cap) | |
| { | |
| struct tb_cap_any header; | |
| u8 vsec_id = 0; | |
| size_t length; | |
| int ret; | |
| ret = tb_port_read(port, &header, TB_CFG_PORT, cap, 1); | |
| if (ret) { | |
| seq_printf(s, "0x%04x <capability read failed>\n", cap); | |
| return; | |
| } | |
| switch (header.basic.cap) { | |
| case TB_PORT_CAP_PHY: | |
| length = PORT_CAP_LANE_LEN; | |
| break; | |
| case TB_PORT_CAP_TIME1: | |
| if (usb4_switch_version(port->sw) < 2) | |
| length = PORT_CAP_TMU_V1_LEN; | |
| else | |
| length = PORT_CAP_TMU_V2_LEN; | |
| break; | |
| case TB_PORT_CAP_POWER: | |
| length = PORT_CAP_POWER_LEN; | |
| break; | |
| case TB_PORT_CAP_ADAP: | |
| if (tb_port_is_pcie_down(port) || tb_port_is_pcie_up(port)) { | |
| if (usb4_switch_version(port->sw) < 2) | |
| length = PORT_CAP_V1_PCIE_LEN; | |
| else | |
| length = PORT_CAP_V2_PCIE_LEN; | |
| } else if (tb_port_is_dpin(port)) { | |
| if (usb4_switch_version(port->sw) < 2) | |
| length = PORT_CAP_DP_V1_LEN; | |
| else | |
| length = PORT_CAP_DP_V2_LEN; | |
| } else if (tb_port_is_dpout(port)) { | |
| length = PORT_CAP_DP_V1_LEN; | |
| } else if (tb_port_is_usb3_down(port) || | |
| tb_port_is_usb3_up(port)) { | |
| length = PORT_CAP_USB3_LEN; | |
| } else { | |
| seq_printf(s, "0x%04x <unsupported capability 0x%02x>\n", | |
| cap, header.basic.cap); | |
| return; | |
| } | |
| break; | |
| case TB_PORT_CAP_VSE: | |
| if (!header.extended_short.length) { | |
| ret = tb_port_read(port, (u32 *)&header + 1, TB_CFG_PORT, | |
| cap + 1, 1); | |
| if (ret) { | |
| seq_printf(s, "0x%04x <capability read failed>\n", | |
| cap + 1); | |
| return; | |
| } | |
| length = header.extended_long.length; | |
| vsec_id = header.extended_short.vsec_id; | |
| } else { | |
| length = header.extended_short.length; | |
| vsec_id = header.extended_short.vsec_id; | |
| } | |
| break; | |
| case TB_PORT_CAP_USB4: | |
| length = PORT_CAP_USB4_LEN; | |
| break; | |
| default: | |
| seq_printf(s, "0x%04x <unsupported capability 0x%02x>\n", | |
| cap, header.basic.cap); | |
| return; | |
| } | |
| cap_show(s, NULL, port, cap, header.basic.cap, vsec_id, length); | |
| } | |
| static void port_caps_show(struct tb_port *port, struct seq_file *s) | |
| { | |
| int cap; | |
| cap = tb_port_next_cap(port, 0); | |
| while (cap > 0) { | |
| port_cap_show(port, s, cap); | |
| cap = tb_port_next_cap(port, cap); | |
| } | |
| } | |
| static int port_basic_regs_show(struct tb_port *port, struct seq_file *s) | |
| { | |
| u32 data[PORT_CAP_BASIC_LEN]; | |
| int ret, i; | |
| ret = tb_port_read(port, data, TB_CFG_PORT, 0, ARRAY_SIZE(data)); | |
| if (ret) | |
| return ret; | |
| for (i = 0; i < ARRAY_SIZE(data); i++) | |
| seq_printf(s, "0x%04x %4d 0x00 0x00 0x%08x\n", i, i, data[i]); | |
| return 0; | |
| } | |
| static int port_regs_show(struct seq_file *s, void *not_used) | |
| { | |
| struct tb_port *port = s->private; | |
| struct tb_switch *sw = port->sw; | |
| struct tb *tb = sw->tb; | |
| int ret; | |
| pm_runtime_get_sync(&sw->dev); | |
| if (mutex_lock_interruptible(&tb->lock)) { | |
| ret = -ERESTARTSYS; | |
| goto out_rpm_put; | |
| } | |
| seq_puts(s, "# offset relative_offset cap_id vs_cap_id value\n"); | |
| ret = port_basic_regs_show(port, s); | |
| if (ret) | |
| goto out_unlock; | |
| port_caps_show(port, s); | |
| out_unlock: | |
| mutex_unlock(&tb->lock); | |
| out_rpm_put: | |
| pm_runtime_mark_last_busy(&sw->dev); | |
| pm_runtime_put_autosuspend(&sw->dev); | |
| return ret; | |
| } | |
| DEBUGFS_ATTR_RW(port_regs); | |
| static void switch_cap_show(struct tb_switch *sw, struct seq_file *s, | |
| unsigned int cap) | |
| { | |
| struct tb_cap_any header; | |
| int ret, length; | |
| u8 vsec_id = 0; | |
| ret = tb_sw_read(sw, &header, TB_CFG_SWITCH, cap, 1); | |
| if (ret) { | |
| seq_printf(s, "0x%04x <capability read failed>\n", cap); | |
| return; | |
| } | |
| if (header.basic.cap == TB_SWITCH_CAP_VSE) { | |
| if (!header.extended_short.length) { | |
| ret = tb_sw_read(sw, (u32 *)&header + 1, TB_CFG_SWITCH, | |
| cap + 1, 1); | |
| if (ret) { | |
| seq_printf(s, "0x%04x <capability read failed>\n", | |
| cap + 1); | |
| return; | |
| } | |
| length = header.extended_long.length; | |
| } else { | |
| length = header.extended_short.length; | |
| } | |
| vsec_id = header.extended_short.vsec_id; | |
| } else { | |
| if (header.basic.cap == TB_SWITCH_CAP_TMU) { | |
| length = SWITCH_CAP_TMU_LEN; | |
| } else { | |
| seq_printf(s, "0x%04x <unknown capability 0x%02x>\n", | |
| cap, header.basic.cap); | |
| return; | |
| } | |
| } | |
| cap_show(s, sw, NULL, cap, header.basic.cap, vsec_id, length); | |
| } | |
| static void switch_caps_show(struct tb_switch *sw, struct seq_file *s) | |
| { | |
| int cap; | |
| cap = tb_switch_next_cap(sw, 0); | |
| while (cap > 0) { | |
| switch_cap_show(sw, s, cap); | |
| cap = tb_switch_next_cap(sw, cap); | |
| } | |
| } | |
| static int switch_basic_regs_show(struct tb_switch *sw, struct seq_file *s) | |
| { | |
| u32 data[SWITCH_CAP_BASIC_LEN]; | |
| size_t dwords; | |
| int ret, i; | |
| /* Only USB4 has the additional registers */ | |
| if (tb_switch_is_usb4(sw)) | |
| dwords = ARRAY_SIZE(data); | |
| else | |
| dwords = 5; | |
| ret = tb_sw_read(sw, data, TB_CFG_SWITCH, 0, dwords); | |
| if (ret) | |
| return ret; | |
| for (i = 0; i < dwords; i++) | |
| seq_printf(s, "0x%04x %4d 0x00 0x00 0x%08x\n", i, i, data[i]); | |
| return 0; | |
| } | |
| static int switch_regs_show(struct seq_file *s, void *not_used) | |
| { | |
| struct tb_switch *sw = s->private; | |
| struct tb *tb = sw->tb; | |
| int ret; | |
| pm_runtime_get_sync(&sw->dev); | |
| if (mutex_lock_interruptible(&tb->lock)) { | |
| ret = -ERESTARTSYS; | |
| goto out_rpm_put; | |
| } | |
| seq_puts(s, "# offset relative_offset cap_id vs_cap_id value\n"); | |
| ret = switch_basic_regs_show(sw, s); | |
| if (ret) | |
| goto out_unlock; | |
| switch_caps_show(sw, s); | |
| out_unlock: | |
| mutex_unlock(&tb->lock); | |
| out_rpm_put: | |
| pm_runtime_mark_last_busy(&sw->dev); | |
| pm_runtime_put_autosuspend(&sw->dev); | |
| return ret; | |
| } | |
| DEBUGFS_ATTR_RW(switch_regs); | |
| static int path_show_one(struct tb_port *port, struct seq_file *s, int hopid) | |
| { | |
| u32 data[PATH_LEN]; | |
| int ret, i; | |
| ret = tb_port_read(port, data, TB_CFG_HOPS, hopid * PATH_LEN, | |
| ARRAY_SIZE(data)); | |
| if (ret) { | |
| seq_printf(s, "0x%04x <not accessible>\n", hopid * PATH_LEN); | |
| return ret; | |
| } | |
| for (i = 0; i < ARRAY_SIZE(data); i++) { | |
| seq_printf(s, "0x%04x %4d 0x%02x 0x%08x\n", | |
| hopid * PATH_LEN + i, i, hopid, data[i]); | |
| } | |
| return 0; | |
| } | |
| static int path_show(struct seq_file *s, void *not_used) | |
| { | |
| struct tb_port *port = s->private; | |
| struct tb_switch *sw = port->sw; | |
| struct tb *tb = sw->tb; | |
| int start, i, ret = 0; | |
| pm_runtime_get_sync(&sw->dev); | |
| if (mutex_lock_interruptible(&tb->lock)) { | |
| ret = -ERESTARTSYS; | |
| goto out_rpm_put; | |
| } | |
| seq_puts(s, "# offset relative_offset in_hop_id value\n"); | |
| /* NHI and lane adapters have entry for path 0 */ | |
| if (tb_port_is_null(port) || tb_port_is_nhi(port)) { | |
| ret = path_show_one(port, s, 0); | |
| if (ret) | |
| goto out_unlock; | |
| } | |
| start = tb_port_is_nhi(port) ? 1 : TB_PATH_MIN_HOPID; | |
| for (i = start; i <= port->config.max_in_hop_id; i++) { | |
| ret = path_show_one(port, s, i); | |
| if (ret) | |
| break; | |
| } | |
| out_unlock: | |
| mutex_unlock(&tb->lock); | |
| out_rpm_put: | |
| pm_runtime_mark_last_busy(&sw->dev); | |
| pm_runtime_put_autosuspend(&sw->dev); | |
| return ret; | |
| } | |
| DEBUGFS_ATTR_RW(path); | |
| static int counter_set_regs_show(struct tb_port *port, struct seq_file *s, | |
| int counter) | |
| { | |
| u32 data[COUNTER_SET_LEN]; | |
| int ret, i; | |
| ret = tb_port_read(port, data, TB_CFG_COUNTERS, | |
| counter * COUNTER_SET_LEN, ARRAY_SIZE(data)); | |
| if (ret) { | |
| seq_printf(s, "0x%04x <not accessible>\n", | |
| counter * COUNTER_SET_LEN); | |
| return ret; | |
| } | |
| for (i = 0; i < ARRAY_SIZE(data); i++) { | |
| seq_printf(s, "0x%04x %4d 0x%02x 0x%08x\n", | |
| counter * COUNTER_SET_LEN + i, i, counter, data[i]); | |
| } | |
| return 0; | |
| } | |
| static int counters_show(struct seq_file *s, void *not_used) | |
| { | |
| struct tb_port *port = s->private; | |
| struct tb_switch *sw = port->sw; | |
| struct tb *tb = sw->tb; | |
| int i, ret = 0; | |
| pm_runtime_get_sync(&sw->dev); | |
| if (mutex_lock_interruptible(&tb->lock)) { | |
| ret = -ERESTARTSYS; | |
| goto out; | |
| } | |
| seq_puts(s, "# offset relative_offset counter_id value\n"); | |
| for (i = 0; i < port->config.max_counters; i++) { | |
| ret = counter_set_regs_show(port, s, i); | |
| if (ret) | |
| break; | |
| } | |
| mutex_unlock(&tb->lock); | |
| out: | |
| pm_runtime_mark_last_busy(&sw->dev); | |
| pm_runtime_put_autosuspend(&sw->dev); | |
| return ret; | |
| } | |
| DEBUGFS_ATTR_RW(counters); | |
| static int sb_regs_show(struct tb_port *port, const struct sb_reg *sb_regs, | |
| size_t size, enum usb4_sb_target target, u8 index, | |
| struct seq_file *s) | |
| { | |
| int ret, i; | |
| seq_puts(s, "# register value\n"); | |
| for (i = 0; i < size; i++) { | |
| const struct sb_reg *regs = &sb_regs[i]; | |
| u8 data[64]; | |
| int j; | |
| memset(data, 0, sizeof(data)); | |
| ret = usb4_port_sb_read(port, target, index, regs->reg, data, | |
| regs->size); | |
| if (ret) { | |
| seq_printf(s, "0x%02x <not accessible>\n", regs->reg); | |
| continue; | |
| } | |
| seq_printf(s, "0x%02x", regs->reg); | |
| for (j = 0; j < regs->size; j++) | |
| seq_printf(s, " 0x%02x", data[j]); | |
| seq_puts(s, "\n"); | |
| } | |
| return 0; | |
| } | |
| static int port_sb_regs_show(struct seq_file *s, void *not_used) | |
| { | |
| struct tb_port *port = s->private; | |
| struct tb_switch *sw = port->sw; | |
| struct tb *tb = sw->tb; | |
| int ret; | |
| pm_runtime_get_sync(&sw->dev); | |
| if (mutex_lock_interruptible(&tb->lock)) { | |
| ret = -ERESTARTSYS; | |
| goto out_rpm_put; | |
| } | |
| ret = sb_regs_show(port, port_sb_regs, ARRAY_SIZE(port_sb_regs), | |
| USB4_SB_TARGET_ROUTER, 0, s); | |
| mutex_unlock(&tb->lock); | |
| out_rpm_put: | |
| pm_runtime_mark_last_busy(&sw->dev); | |
| pm_runtime_put_autosuspend(&sw->dev); | |
| return ret; | |
| } | |
| DEBUGFS_ATTR_RW(port_sb_regs); | |
| /** | |
| * tb_switch_debugfs_init() - Add debugfs entries for router | |
| * @sw: Pointer to the router | |
| * | |
| * Adds debugfs directories and files for given router. | |
| */ | |
| void tb_switch_debugfs_init(struct tb_switch *sw) | |
| { | |
| struct dentry *debugfs_dir; | |
| struct tb_port *port; | |
| debugfs_dir = debugfs_create_dir(dev_name(&sw->dev), tb_debugfs_root); | |
| sw->debugfs_dir = debugfs_dir; | |
| debugfs_create_file("regs", DEBUGFS_MODE, debugfs_dir, sw, | |
| &switch_regs_fops); | |
| if (sw->drom) | |
| debugfs_create_blob("drom", 0400, debugfs_dir, &sw->drom_blob); | |
| tb_switch_for_each_port(sw, port) { | |
| struct dentry *debugfs_dir; | |
| char dir_name[10]; | |
| if (port->disabled) | |
| continue; | |
| if (port->config.type == TB_TYPE_INACTIVE) | |
| continue; | |
| snprintf(dir_name, sizeof(dir_name), "port%d", port->port); | |
| debugfs_dir = debugfs_create_dir(dir_name, sw->debugfs_dir); | |
| debugfs_create_file("regs", DEBUGFS_MODE, debugfs_dir, | |
| port, &port_regs_fops); | |
| debugfs_create_file("path", 0400, debugfs_dir, port, | |
| &path_fops); | |
| if (port->config.counters_support) | |
| debugfs_create_file("counters", 0600, debugfs_dir, port, | |
| &counters_fops); | |
| if (port->usb4) | |
| debugfs_create_file("sb_regs", DEBUGFS_MODE, debugfs_dir, | |
| port, &port_sb_regs_fops); | |
| } | |
| margining_switch_init(sw); | |
| } | |
| /** | |
| * tb_switch_debugfs_remove() - Remove all router debugfs entries | |
| * @sw: Pointer to the router | |
| * | |
| * Removes all previously added debugfs entries under this router. | |
| */ | |
| void tb_switch_debugfs_remove(struct tb_switch *sw) | |
| { | |
| margining_switch_remove(sw); | |
| debugfs_remove_recursive(sw->debugfs_dir); | |
| } | |
| void tb_xdomain_debugfs_init(struct tb_xdomain *xd) | |
| { | |
| margining_xdomain_init(xd); | |
| } | |
| void tb_xdomain_debugfs_remove(struct tb_xdomain *xd) | |
| { | |
| margining_xdomain_remove(xd); | |
| } | |
| /** | |
| * tb_service_debugfs_init() - Add debugfs directory for service | |
| * @svc: Thunderbolt service pointer | |
| * | |
| * Adds debugfs directory for service. | |
| */ | |
| void tb_service_debugfs_init(struct tb_service *svc) | |
| { | |
| svc->debugfs_dir = debugfs_create_dir(dev_name(&svc->dev), | |
| tb_debugfs_root); | |
| } | |
| /** | |
| * tb_service_debugfs_remove() - Remove service debugfs directory | |
| * @svc: Thunderbolt service pointer | |
| * | |
| * Removes the previously created debugfs directory for @svc. | |
| */ | |
| void tb_service_debugfs_remove(struct tb_service *svc) | |
| { | |
| debugfs_remove_recursive(svc->debugfs_dir); | |
| svc->debugfs_dir = NULL; | |
| } | |
| static int retimer_sb_regs_show(struct seq_file *s, void *not_used) | |
| { | |
| struct tb_retimer *rt = s->private; | |
| struct tb *tb = rt->tb; | |
| int ret; | |
| pm_runtime_get_sync(&rt->dev); | |
| if (mutex_lock_interruptible(&tb->lock)) { | |
| ret = -ERESTARTSYS; | |
| goto out_rpm_put; | |
| } | |
| ret = sb_regs_show(rt->port, retimer_sb_regs, ARRAY_SIZE(retimer_sb_regs), | |
| USB4_SB_TARGET_RETIMER, rt->index, s); | |
| mutex_unlock(&tb->lock); | |
| out_rpm_put: | |
| pm_runtime_mark_last_busy(&rt->dev); | |
| pm_runtime_put_autosuspend(&rt->dev); | |
| return ret; | |
| } | |
| DEBUGFS_ATTR_RW(retimer_sb_regs); | |
| /** | |
| * tb_retimer_debugfs_init() - Add debugfs directory for retimer | |
| * @rt: Pointer to retimer structure | |
| * | |
| * Adds and populates retimer debugfs directory. | |
| */ | |
| void tb_retimer_debugfs_init(struct tb_retimer *rt) | |
| { | |
| struct dentry *debugfs_dir; | |
| debugfs_dir = debugfs_create_dir(dev_name(&rt->dev), tb_debugfs_root); | |
| debugfs_create_file("sb_regs", DEBUGFS_MODE, debugfs_dir, rt, | |
| &retimer_sb_regs_fops); | |
| margining_retimer_init(rt, debugfs_dir); | |
| } | |
| /** | |
| * tb_retimer_debugfs_remove() - Remove retimer debugfs directory | |
| * @rt: Pointer to retimer structure | |
| * | |
| * Removes the retimer debugfs directory along with its contents. | |
| */ | |
| void tb_retimer_debugfs_remove(struct tb_retimer *rt) | |
| { | |
| debugfs_lookup_and_remove(dev_name(&rt->dev), tb_debugfs_root); | |
| margining_retimer_remove(rt); | |
| } | |
| void tb_debugfs_init(void) | |
| { | |
| tb_debugfs_root = debugfs_create_dir("thunderbolt", NULL); | |
| } | |
| void tb_debugfs_exit(void) | |
| { | |
| debugfs_remove_recursive(tb_debugfs_root); | |
| } |