| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * (C) 1997 Linus Torvalds | |
| * (C) 1999 Andrea Arcangeli <andrea@suse.de> (dynamic inode allocation) | |
| */ | |
| #include <linux/export.h> | |
| #include <linux/fs.h> | |
| #include <linux/filelock.h> | |
| #include <linux/mm.h> | |
| #include <linux/backing-dev.h> | |
| #include <linux/hash.h> | |
| #include <linux/swap.h> | |
| #include <linux/security.h> | |
| #include <linux/cdev.h> | |
| #include <linux/memblock.h> | |
| #include <linux/fsnotify.h> | |
| #include <linux/fsverity.h> | |
| #include <linux/mount.h> | |
| #include <linux/posix_acl.h> | |
| #include <linux/ratelimit.h> | |
| #include <linux/list_lru.h> | |
| #include <linux/iversion.h> | |
| #include <linux/rw_hint.h> | |
| #include <linux/seq_file.h> | |
| #include <linux/debugfs.h> | |
| #include <trace/events/writeback.h> | |
| #define CREATE_TRACE_POINTS | |
| #include <trace/events/timestamp.h> | |
| #include "internal.h" | |
| /* | |
| * Inode locking rules: | |
| * | |
| * inode->i_lock protects: | |
| * inode->i_state, inode->i_hash, __iget(), inode->i_io_list | |
| * Inode LRU list locks protect: | |
| * inode->i_sb->s_inode_lru, inode->i_lru | |
| * inode->i_sb->s_inode_list_lock protects: | |
| * inode->i_sb->s_inodes, inode->i_sb_list | |
| * bdi->wb.list_lock protects: | |
| * bdi->wb.b_{dirty,io,more_io,dirty_time}, inode->i_io_list | |
| * inode_hash_lock protects: | |
| * inode_hashtable, inode->i_hash | |
| * | |
| * Lock ordering: | |
| * | |
| * inode->i_sb->s_inode_list_lock | |
| * inode->i_lock | |
| * Inode LRU list locks | |
| * | |
| * bdi->wb.list_lock | |
| * inode->i_lock | |
| * | |
| * inode_hash_lock | |
| * inode->i_lock | |
| */ | |
| static unsigned int i_hash_mask __ro_after_init; | |
| static unsigned int i_hash_shift __ro_after_init; | |
| static struct hlist_head *inode_hashtable __ro_after_init; | |
| static __cacheline_aligned_in_smp DEFINE_SPINLOCK(inode_hash_lock); | |
| /* | |
| * Empty aops. Can be used for the cases where the user does not | |
| * define any of the address_space operations. | |
| */ | |
| const struct address_space_operations empty_aops = { | |
| }; | |
| EXPORT_SYMBOL(empty_aops); | |
| static DEFINE_PER_CPU(unsigned long, nr_inodes); | |
| static DEFINE_PER_CPU(unsigned long, nr_unused); | |
| static struct kmem_cache *inode_cachep __ro_after_init; | |
| static long get_nr_inodes(void) | |
| { | |
| int i; | |
| long sum = 0; | |
| for_each_possible_cpu(i) | |
| sum += per_cpu(nr_inodes, i); | |
| return sum < 0 ? 0 : sum; | |
| } | |
| static inline long get_nr_inodes_unused(void) | |
| { | |
| int i; | |
| long sum = 0; | |
| for_each_possible_cpu(i) | |
| sum += per_cpu(nr_unused, i); | |
| return sum < 0 ? 0 : sum; | |
| } | |
| long get_nr_dirty_inodes(void) | |
| { | |
| /* not actually dirty inodes, but a wild approximation */ | |
| long nr_dirty = get_nr_inodes() - get_nr_inodes_unused(); | |
| return nr_dirty > 0 ? nr_dirty : 0; | |
| } | |
| #ifdef CONFIG_DEBUG_FS | |
| static DEFINE_PER_CPU(long, mg_ctime_updates); | |
| static DEFINE_PER_CPU(long, mg_fine_stamps); | |
| static DEFINE_PER_CPU(long, mg_ctime_swaps); | |
| static unsigned long get_mg_ctime_updates(void) | |
| { | |
| unsigned long sum = 0; | |
| int i; | |
| for_each_possible_cpu(i) | |
| sum += data_race(per_cpu(mg_ctime_updates, i)); | |
| return sum; | |
| } | |
| static unsigned long get_mg_fine_stamps(void) | |
| { | |
| unsigned long sum = 0; | |
| int i; | |
| for_each_possible_cpu(i) | |
| sum += data_race(per_cpu(mg_fine_stamps, i)); | |
| return sum; | |
| } | |
| static unsigned long get_mg_ctime_swaps(void) | |
| { | |
| unsigned long sum = 0; | |
| int i; | |
| for_each_possible_cpu(i) | |
| sum += data_race(per_cpu(mg_ctime_swaps, i)); | |
| return sum; | |
| } | |
| #define mgtime_counter_inc(__var) this_cpu_inc(__var) | |
| static int mgts_show(struct seq_file *s, void *p) | |
| { | |
| unsigned long ctime_updates = get_mg_ctime_updates(); | |
| unsigned long ctime_swaps = get_mg_ctime_swaps(); | |
| unsigned long fine_stamps = get_mg_fine_stamps(); | |
| unsigned long floor_swaps = timekeeping_get_mg_floor_swaps(); | |
| seq_printf(s, "%lu %lu %lu %lu\n", | |
| ctime_updates, ctime_swaps, fine_stamps, floor_swaps); | |
| return 0; | |
| } | |
| DEFINE_SHOW_ATTRIBUTE(mgts); | |
| static int __init mg_debugfs_init(void) | |
| { | |
| debugfs_create_file("multigrain_timestamps", S_IFREG | S_IRUGO, NULL, NULL, &mgts_fops); | |
| return 0; | |
| } | |
| late_initcall(mg_debugfs_init); | |
| #else /* ! CONFIG_DEBUG_FS */ | |
| #define mgtime_counter_inc(__var) do { } while (0) | |
| #endif /* CONFIG_DEBUG_FS */ | |
| /* | |
| * Handle nr_inode sysctl | |
| */ | |
| #ifdef CONFIG_SYSCTL | |
| /* | |
| * Statistics gathering.. | |
| */ | |
| static struct inodes_stat_t inodes_stat; | |
| static int proc_nr_inodes(const struct ctl_table *table, int write, void *buffer, | |
| size_t *lenp, loff_t *ppos) | |
| { | |
| inodes_stat.nr_inodes = get_nr_inodes(); | |
| inodes_stat.nr_unused = get_nr_inodes_unused(); | |
| return proc_doulongvec_minmax(table, write, buffer, lenp, ppos); | |
| } | |
| static const struct ctl_table inodes_sysctls[] = { | |
| { | |
| .procname = "inode-nr", | |
| .data = &inodes_stat, | |
| .maxlen = 2*sizeof(long), | |
| .mode = 0444, | |
| .proc_handler = proc_nr_inodes, | |
| }, | |
| { | |
| .procname = "inode-state", | |
| .data = &inodes_stat, | |
| .maxlen = 7*sizeof(long), | |
| .mode = 0444, | |
| .proc_handler = proc_nr_inodes, | |
| }, | |
| }; | |
| static int __init init_fs_inode_sysctls(void) | |
| { | |
| register_sysctl_init("fs", inodes_sysctls); | |
| return 0; | |
| } | |
| early_initcall(init_fs_inode_sysctls); | |
| #endif | |
| static int no_open(struct inode *inode, struct file *file) | |
| { | |
| return -ENXIO; | |
| } | |
| /** | |
| * inode_init_always_gfp - perform inode structure initialisation | |
| * @sb: superblock inode belongs to | |
| * @inode: inode to initialise | |
| * @gfp: allocation flags | |
| * | |
| * These are initializations that need to be done on every inode | |
| * allocation as the fields are not initialised by slab allocation. | |
| * If there are additional allocations required @gfp is used. | |
| */ | |
| int inode_init_always_gfp(struct super_block *sb, struct inode *inode, gfp_t gfp) | |
| { | |
| static const struct inode_operations empty_iops; | |
| static const struct file_operations no_open_fops = {.open = no_open}; | |
| struct address_space *const mapping = &inode->i_data; | |
| inode->i_sb = sb; | |
| inode->i_blkbits = sb->s_blocksize_bits; | |
| inode->i_flags = 0; | |
| inode_state_assign_raw(inode, 0); | |
| atomic64_set(&inode->i_sequence, 0); | |
| atomic_set(&inode->i_count, 1); | |
| inode->i_op = &empty_iops; | |
| inode->i_fop = &no_open_fops; | |
| inode->i_ino = 0; | |
| inode->__i_nlink = 1; | |
| inode->i_opflags = 0; | |
| if (sb->s_xattr) | |
| inode->i_opflags |= IOP_XATTR; | |
| if (sb->s_type->fs_flags & FS_MGTIME) | |
| inode->i_opflags |= IOP_MGTIME; | |
| i_uid_write(inode, 0); | |
| i_gid_write(inode, 0); | |
| atomic_set(&inode->i_writecount, 0); | |
| inode->i_size = 0; | |
| inode->i_write_hint = WRITE_LIFE_NOT_SET; | |
| inode->i_blocks = 0; | |
| inode->i_bytes = 0; | |
| inode->i_generation = 0; | |
| inode->i_pipe = NULL; | |
| inode->i_cdev = NULL; | |
| inode->i_link = NULL; | |
| inode->i_dir_seq = 0; | |
| inode->i_rdev = 0; | |
| inode->dirtied_when = 0; | |
| #ifdef CONFIG_CGROUP_WRITEBACK | |
| inode->i_wb_frn_winner = 0; | |
| inode->i_wb_frn_avg_time = 0; | |
| inode->i_wb_frn_history = 0; | |
| #endif | |
| spin_lock_init(&inode->i_lock); | |
| lockdep_set_class(&inode->i_lock, &sb->s_type->i_lock_key); | |
| init_rwsem(&inode->i_rwsem); | |
| lockdep_set_class(&inode->i_rwsem, &sb->s_type->i_mutex_key); | |
| atomic_set(&inode->i_dio_count, 0); | |
| mapping->a_ops = &empty_aops; | |
| mapping->host = inode; | |
| mapping->flags = 0; | |
| mapping->wb_err = 0; | |
| atomic_set(&mapping->i_mmap_writable, 0); | |
| mapping_set_gfp_mask(mapping, GFP_HIGHUSER_MOVABLE); | |
| mapping->writeback_index = 0; | |
| init_rwsem(&mapping->invalidate_lock); | |
| lockdep_set_class_and_name(&mapping->invalidate_lock, | |
| &sb->s_type->invalidate_lock_key, | |
| "mapping.invalidate_lock"); | |
| if (sb->s_iflags & SB_I_STABLE_WRITES) | |
| mapping_set_stable_writes(mapping); | |
| inode->i_private = NULL; | |
| inode->i_mapping = mapping; | |
| INIT_HLIST_HEAD(&inode->i_dentry); /* buggered by rcu freeing */ | |
| #ifdef CONFIG_FS_POSIX_ACL | |
| inode->i_acl = inode->i_default_acl = ACL_NOT_CACHED; | |
| #endif | |
| #ifdef CONFIG_FSNOTIFY | |
| inode->i_fsnotify_mask = 0; | |
| #endif | |
| inode->i_flctx = NULL; | |
| if (unlikely(security_inode_alloc(inode, gfp))) | |
| return -ENOMEM; | |
| this_cpu_inc(nr_inodes); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL(inode_init_always_gfp); | |
| void free_inode_nonrcu(struct inode *inode) | |
| { | |
| kmem_cache_free(inode_cachep, inode); | |
| } | |
| EXPORT_SYMBOL(free_inode_nonrcu); | |
| static void i_callback(struct rcu_head *head) | |
| { | |
| struct inode *inode = container_of(head, struct inode, i_rcu); | |
| if (inode->free_inode) | |
| inode->free_inode(inode); | |
| else | |
| free_inode_nonrcu(inode); | |
| } | |
| /** | |
| * alloc_inode - obtain an inode | |
| * @sb: superblock | |
| * | |
| * Allocates a new inode for given superblock. | |
| * Inode wont be chained in superblock s_inodes list | |
| * This means : | |
| * - fs can't be unmount | |
| * - quotas, fsnotify, writeback can't work | |
| */ | |
| struct inode *alloc_inode(struct super_block *sb) | |
| { | |
| const struct super_operations *ops = sb->s_op; | |
| struct inode *inode; | |
| if (ops->alloc_inode) | |
| inode = ops->alloc_inode(sb); | |
| else | |
| inode = alloc_inode_sb(sb, inode_cachep, GFP_KERNEL); | |
| if (!inode) | |
| return NULL; | |
| if (unlikely(inode_init_always(sb, inode))) { | |
| if (ops->destroy_inode) { | |
| ops->destroy_inode(inode); | |
| if (!ops->free_inode) | |
| return NULL; | |
| } | |
| inode->free_inode = ops->free_inode; | |
| i_callback(&inode->i_rcu); | |
| return NULL; | |
| } | |
| return inode; | |
| } | |
| void __destroy_inode(struct inode *inode) | |
| { | |
| inode_detach_wb(inode); | |
| security_inode_free(inode); | |
| fsnotify_inode_delete(inode); | |
| locks_free_lock_context(inode); | |
| if (!inode->i_nlink) { | |
| WARN_ON(atomic_long_read(&inode->i_sb->s_remove_count) == 0); | |
| atomic_long_dec(&inode->i_sb->s_remove_count); | |
| } | |
| #ifdef CONFIG_FS_POSIX_ACL | |
| if (inode->i_acl && !is_uncached_acl(inode->i_acl)) | |
| posix_acl_release(inode->i_acl); | |
| if (inode->i_default_acl && !is_uncached_acl(inode->i_default_acl)) | |
| posix_acl_release(inode->i_default_acl); | |
| #endif | |
| this_cpu_dec(nr_inodes); | |
| } | |
| EXPORT_SYMBOL(__destroy_inode); | |
| static void destroy_inode(struct inode *inode) | |
| { | |
| const struct super_operations *ops = inode->i_sb->s_op; | |
| BUG_ON(!list_empty(&inode->i_lru)); | |
| __destroy_inode(inode); | |
| if (ops->destroy_inode) { | |
| ops->destroy_inode(inode); | |
| if (!ops->free_inode) | |
| return; | |
| } | |
| inode->free_inode = ops->free_inode; | |
| call_rcu(&inode->i_rcu, i_callback); | |
| } | |
| /** | |
| * drop_nlink - directly drop an inode's link count | |
| * @inode: inode | |
| * | |
| * This is a low-level filesystem helper to replace any | |
| * direct filesystem manipulation of i_nlink. In cases | |
| * where we are attempting to track writes to the | |
| * filesystem, a decrement to zero means an imminent | |
| * write when the file is truncated and actually unlinked | |
| * on the filesystem. | |
| */ | |
| void drop_nlink(struct inode *inode) | |
| { | |
| WARN_ON(inode->i_nlink == 0); | |
| inode->__i_nlink--; | |
| if (!inode->i_nlink) | |
| atomic_long_inc(&inode->i_sb->s_remove_count); | |
| } | |
| EXPORT_SYMBOL(drop_nlink); | |
| /** | |
| * clear_nlink - directly zero an inode's link count | |
| * @inode: inode | |
| * | |
| * This is a low-level filesystem helper to replace any | |
| * direct filesystem manipulation of i_nlink. See | |
| * drop_nlink() for why we care about i_nlink hitting zero. | |
| */ | |
| void clear_nlink(struct inode *inode) | |
| { | |
| if (inode->i_nlink) { | |
| inode->__i_nlink = 0; | |
| atomic_long_inc(&inode->i_sb->s_remove_count); | |
| } | |
| } | |
| EXPORT_SYMBOL(clear_nlink); | |
| /** | |
| * set_nlink - directly set an inode's link count | |
| * @inode: inode | |
| * @nlink: new nlink (should be non-zero) | |
| * | |
| * This is a low-level filesystem helper to replace any | |
| * direct filesystem manipulation of i_nlink. | |
| */ | |
| void set_nlink(struct inode *inode, unsigned int nlink) | |
| { | |
| if (!nlink) { | |
| clear_nlink(inode); | |
| } else { | |
| /* Yes, some filesystems do change nlink from zero to one */ | |
| if (inode->i_nlink == 0) | |
| atomic_long_dec(&inode->i_sb->s_remove_count); | |
| inode->__i_nlink = nlink; | |
| } | |
| } | |
| EXPORT_SYMBOL(set_nlink); | |
| /** | |
| * inc_nlink - directly increment an inode's link count | |
| * @inode: inode | |
| * | |
| * This is a low-level filesystem helper to replace any | |
| * direct filesystem manipulation of i_nlink. Currently, | |
| * it is only here for parity with dec_nlink(). | |
| */ | |
| void inc_nlink(struct inode *inode) | |
| { | |
| if (unlikely(inode->i_nlink == 0)) { | |
| WARN_ON(!(inode_state_read_once(inode) & I_LINKABLE)); | |
| atomic_long_dec(&inode->i_sb->s_remove_count); | |
| } | |
| inode->__i_nlink++; | |
| } | |
| EXPORT_SYMBOL(inc_nlink); | |
| static void __address_space_init_once(struct address_space *mapping) | |
| { | |
| xa_init_flags(&mapping->i_pages, XA_FLAGS_LOCK_IRQ | XA_FLAGS_ACCOUNT); | |
| init_rwsem(&mapping->i_mmap_rwsem); | |
| spin_lock_init(&mapping->i_private_lock); | |
| mapping->i_mmap = RB_ROOT_CACHED; | |
| } | |
| void address_space_init_once(struct address_space *mapping) | |
| { | |
| memset(mapping, 0, sizeof(*mapping)); | |
| __address_space_init_once(mapping); | |
| } | |
| EXPORT_SYMBOL(address_space_init_once); | |
| /* | |
| * These are initializations that only need to be done | |
| * once, because the fields are idempotent across use | |
| * of the inode, so let the slab aware of that. | |
| */ | |
| void inode_init_once(struct inode *inode) | |
| { | |
| memset(inode, 0, sizeof(*inode)); | |
| INIT_HLIST_NODE(&inode->i_hash); | |
| INIT_LIST_HEAD(&inode->i_devices); | |
| INIT_LIST_HEAD(&inode->i_io_list); | |
| INIT_LIST_HEAD(&inode->i_wb_list); | |
| INIT_LIST_HEAD(&inode->i_lru); | |
| INIT_LIST_HEAD(&inode->i_sb_list); | |
| __address_space_init_once(&inode->i_data); | |
| i_size_ordered_init(inode); | |
| } | |
| EXPORT_SYMBOL(inode_init_once); | |
| static void init_once(void *foo) | |
| { | |
| struct inode *inode = (struct inode *) foo; | |
| inode_init_once(inode); | |
| } | |
| struct wait_queue_head *inode_bit_waitqueue(struct wait_bit_queue_entry *wqe, | |
| struct inode *inode, u32 bit) | |
| { | |
| void *bit_address; | |
| bit_address = inode_state_wait_address(inode, bit); | |
| init_wait_var_entry(wqe, bit_address, 0); | |
| return __var_waitqueue(bit_address); | |
| } | |
| EXPORT_SYMBOL(inode_bit_waitqueue); | |
| void wait_on_new_inode(struct inode *inode) | |
| { | |
| struct wait_bit_queue_entry wqe; | |
| struct wait_queue_head *wq_head; | |
| spin_lock(&inode->i_lock); | |
| if (!(inode_state_read(inode) & I_NEW)) { | |
| spin_unlock(&inode->i_lock); | |
| return; | |
| } | |
| wq_head = inode_bit_waitqueue(&wqe, inode, __I_NEW); | |
| for (;;) { | |
| prepare_to_wait_event(wq_head, &wqe.wq_entry, TASK_UNINTERRUPTIBLE); | |
| if (!(inode_state_read(inode) & I_NEW)) | |
| break; | |
| spin_unlock(&inode->i_lock); | |
| schedule(); | |
| spin_lock(&inode->i_lock); | |
| } | |
| finish_wait(wq_head, &wqe.wq_entry); | |
| WARN_ON(inode_state_read(inode) & I_NEW); | |
| spin_unlock(&inode->i_lock); | |
| } | |
| EXPORT_SYMBOL(wait_on_new_inode); | |
| static void __inode_lru_list_add(struct inode *inode, bool rotate) | |
| { | |
| lockdep_assert_held(&inode->i_lock); | |
| if (inode_state_read(inode) & (I_DIRTY_ALL | I_SYNC | I_FREEING | I_WILL_FREE)) | |
| return; | |
| if (icount_read(inode)) | |
| return; | |
| if (!(inode->i_sb->s_flags & SB_ACTIVE)) | |
| return; | |
| if (!mapping_shrinkable(&inode->i_data)) | |
| return; | |
| if (list_lru_add_obj(&inode->i_sb->s_inode_lru, &inode->i_lru)) | |
| this_cpu_inc(nr_unused); | |
| else if (rotate) | |
| inode_state_set(inode, I_REFERENCED); | |
| } | |
| /* | |
| * Add inode to LRU if needed (inode is unused and clean). | |
| */ | |
| void inode_lru_list_add(struct inode *inode) | |
| { | |
| __inode_lru_list_add(inode, false); | |
| } | |
| static void inode_lru_list_del(struct inode *inode) | |
| { | |
| if (list_empty(&inode->i_lru)) | |
| return; | |
| if (list_lru_del_obj(&inode->i_sb->s_inode_lru, &inode->i_lru)) | |
| this_cpu_dec(nr_unused); | |
| } | |
| static void inode_pin_lru_isolating(struct inode *inode) | |
| { | |
| lockdep_assert_held(&inode->i_lock); | |
| WARN_ON(inode_state_read(inode) & (I_LRU_ISOLATING | I_FREEING | I_WILL_FREE)); | |
| inode_state_set(inode, I_LRU_ISOLATING); | |
| } | |
| static void inode_unpin_lru_isolating(struct inode *inode) | |
| { | |
| spin_lock(&inode->i_lock); | |
| WARN_ON(!(inode_state_read(inode) & I_LRU_ISOLATING)); | |
| inode_state_clear(inode, I_LRU_ISOLATING); | |
| /* Called with inode->i_lock which ensures memory ordering. */ | |
| inode_wake_up_bit(inode, __I_LRU_ISOLATING); | |
| spin_unlock(&inode->i_lock); | |
| } | |
| static void inode_wait_for_lru_isolating(struct inode *inode) | |
| { | |
| struct wait_bit_queue_entry wqe; | |
| struct wait_queue_head *wq_head; | |
| lockdep_assert_held(&inode->i_lock); | |
| if (!(inode_state_read(inode) & I_LRU_ISOLATING)) | |
| return; | |
| wq_head = inode_bit_waitqueue(&wqe, inode, __I_LRU_ISOLATING); | |
| for (;;) { | |
| prepare_to_wait_event(wq_head, &wqe.wq_entry, TASK_UNINTERRUPTIBLE); | |
| /* | |
| * Checking I_LRU_ISOLATING with inode->i_lock guarantees | |
| * memory ordering. | |
| */ | |
| if (!(inode_state_read(inode) & I_LRU_ISOLATING)) | |
| break; | |
| spin_unlock(&inode->i_lock); | |
| schedule(); | |
| spin_lock(&inode->i_lock); | |
| } | |
| finish_wait(wq_head, &wqe.wq_entry); | |
| WARN_ON(inode_state_read(inode) & I_LRU_ISOLATING); | |
| } | |
| /** | |
| * inode_sb_list_add - add inode to the superblock list of inodes | |
| * @inode: inode to add | |
| */ | |
| void inode_sb_list_add(struct inode *inode) | |
| { | |
| struct super_block *sb = inode->i_sb; | |
| spin_lock(&sb->s_inode_list_lock); | |
| list_add(&inode->i_sb_list, &sb->s_inodes); | |
| spin_unlock(&sb->s_inode_list_lock); | |
| } | |
| EXPORT_SYMBOL_GPL(inode_sb_list_add); | |
| static inline void inode_sb_list_del(struct inode *inode) | |
| { | |
| struct super_block *sb = inode->i_sb; | |
| if (!list_empty(&inode->i_sb_list)) { | |
| spin_lock(&sb->s_inode_list_lock); | |
| list_del_init(&inode->i_sb_list); | |
| spin_unlock(&sb->s_inode_list_lock); | |
| } | |
| } | |
| static unsigned long hash(struct super_block *sb, u64 hashval) | |
| { | |
| unsigned long tmp; | |
| tmp = (hashval * (unsigned long)sb) ^ (GOLDEN_RATIO_PRIME + hashval) / | |
| L1_CACHE_BYTES; | |
| tmp = tmp ^ ((tmp ^ GOLDEN_RATIO_PRIME) >> i_hash_shift); | |
| return tmp & i_hash_mask; | |
| } | |
| /** | |
| * __insert_inode_hash - hash an inode | |
| * @inode: unhashed inode | |
| * @hashval: u64 value used to locate this object in the | |
| * inode_hashtable. | |
| * | |
| * Add an inode to the inode hash for this superblock. | |
| */ | |
| void __insert_inode_hash(struct inode *inode, u64 hashval) | |
| { | |
| struct hlist_head *b = inode_hashtable + hash(inode->i_sb, hashval); | |
| spin_lock(&inode_hash_lock); | |
| spin_lock(&inode->i_lock); | |
| hlist_add_head_rcu(&inode->i_hash, b); | |
| spin_unlock(&inode->i_lock); | |
| spin_unlock(&inode_hash_lock); | |
| } | |
| EXPORT_SYMBOL(__insert_inode_hash); | |
| /** | |
| * __remove_inode_hash - remove an inode from the hash | |
| * @inode: inode to unhash | |
| * | |
| * Remove an inode from the superblock. | |
| */ | |
| void __remove_inode_hash(struct inode *inode) | |
| { | |
| spin_lock(&inode_hash_lock); | |
| spin_lock(&inode->i_lock); | |
| hlist_del_init_rcu(&inode->i_hash); | |
| spin_unlock(&inode->i_lock); | |
| spin_unlock(&inode_hash_lock); | |
| } | |
| EXPORT_SYMBOL(__remove_inode_hash); | |
| void dump_mapping(const struct address_space *mapping) | |
| { | |
| struct inode *host; | |
| const struct address_space_operations *a_ops; | |
| struct hlist_node *dentry_first; | |
| struct dentry *dentry_ptr; | |
| struct dentry dentry; | |
| char fname[64] = {}; | |
| u64 ino; | |
| /* | |
| * If mapping is an invalid pointer, we don't want to crash | |
| * accessing it, so probe everything depending on it carefully. | |
| */ | |
| if (get_kernel_nofault(host, &mapping->host) || | |
| get_kernel_nofault(a_ops, &mapping->a_ops)) { | |
| pr_warn("invalid mapping:%px\n", mapping); | |
| return; | |
| } | |
| if (!host) { | |
| pr_warn("aops:%ps\n", a_ops); | |
| return; | |
| } | |
| if (get_kernel_nofault(dentry_first, &host->i_dentry.first) || | |
| get_kernel_nofault(ino, &host->i_ino)) { | |
| pr_warn("aops:%ps invalid inode:%px\n", a_ops, host); | |
| return; | |
| } | |
| if (!dentry_first) { | |
| pr_warn("aops:%ps ino:%llx\n", a_ops, ino); | |
| return; | |
| } | |
| dentry_ptr = container_of(dentry_first, struct dentry, d_alias); | |
| if (get_kernel_nofault(dentry, dentry_ptr) || | |
| !dentry.d_parent || !dentry.d_name.name) { | |
| pr_warn("aops:%ps ino:%llx invalid dentry:%px\n", | |
| a_ops, ino, dentry_ptr); | |
| return; | |
| } | |
| if (strncpy_from_kernel_nofault(fname, dentry.d_name.name, 63) < 0) | |
| strscpy(fname, "<invalid>"); | |
| /* | |
| * Even if strncpy_from_kernel_nofault() succeeded, | |
| * the fname could be unreliable | |
| */ | |
| pr_warn("aops:%ps ino:%llx dentry name(?):\"%s\"\n", | |
| a_ops, ino, fname); | |
| } | |
| void clear_inode(struct inode *inode) | |
| { | |
| /* | |
| * Only IS_VERITY() inodes can have verity info, so start by checking | |
| * for IS_VERITY() (which is faster than retrieving the pointer to the | |
| * verity info). This minimizes overhead for non-verity inodes. | |
| */ | |
| if (IS_ENABLED(CONFIG_FS_VERITY) && IS_VERITY(inode)) | |
| fsverity_cleanup_inode(inode); | |
| /* | |
| * We have to cycle the i_pages lock here because reclaim | |
| * can be in the process of removing the last page (in | |
| * __filemap_remove_folio()) and we must not free the mapping | |
| * under it. We also remove nodes which are empty; these | |
| * can occur in two different ways. The first is that radix | |
| * tree expansion can fail partway and the second is that THP | |
| * collapse_file() can allocate some temporary nodes and not | |
| * clean them up. | |
| */ | |
| xa_destroy(&inode->i_data.i_pages); | |
| BUG_ON(inode->i_data.nrpages); | |
| BUG_ON(!(inode_state_read_once(inode) & I_FREEING)); | |
| BUG_ON(inode_state_read_once(inode) & I_CLEAR); | |
| BUG_ON(!list_empty(&inode->i_wb_list)); | |
| /* don't need i_lock here, no concurrent mods to i_state */ | |
| inode_state_assign_raw(inode, I_FREEING | I_CLEAR); | |
| } | |
| EXPORT_SYMBOL(clear_inode); | |
| /* | |
| * Free the inode passed in, removing it from the lists it is still connected | |
| * to. We remove any pages still attached to the inode and wait for any IO that | |
| * is still in progress before finally destroying the inode. | |
| * | |
| * An inode must already be marked I_FREEING so that we avoid the inode being | |
| * moved back onto lists if we race with other code that manipulates the lists | |
| * (e.g. writeback_single_inode). The caller is responsible for setting this. | |
| * | |
| * An inode must already be removed from the LRU list before being evicted from | |
| * the cache. This should occur atomically with setting the I_FREEING state | |
| * flag, so no inodes here should ever be on the LRU when being evicted. | |
| */ | |
| static void evict(struct inode *inode) | |
| { | |
| const struct super_operations *op = inode->i_sb->s_op; | |
| BUG_ON(!(inode_state_read_once(inode) & I_FREEING)); | |
| BUG_ON(!list_empty(&inode->i_lru)); | |
| inode_io_list_del(inode); | |
| inode_sb_list_del(inode); | |
| spin_lock(&inode->i_lock); | |
| inode_wait_for_lru_isolating(inode); | |
| /* | |
| * Wait for flusher thread to be done with the inode so that filesystem | |
| * does not start destroying it while writeback is still running. Since | |
| * the inode has I_FREEING set, flusher thread won't start new work on | |
| * the inode. We just have to wait for running writeback to finish. | |
| */ | |
| inode_wait_for_writeback(inode); | |
| spin_unlock(&inode->i_lock); | |
| if (op->evict_inode) { | |
| op->evict_inode(inode); | |
| } else { | |
| truncate_inode_pages_final(&inode->i_data); | |
| clear_inode(inode); | |
| } | |
| if (S_ISCHR(inode->i_mode) && inode->i_cdev) | |
| cd_forget(inode); | |
| remove_inode_hash(inode); | |
| /* | |
| * Wake up waiters in __wait_on_freeing_inode(). | |
| * | |
| * It is an invariant that any thread we need to wake up is already | |
| * accounted for before remove_inode_hash() acquires ->i_lock -- both | |
| * sides take the lock and sleep is aborted if the inode is found | |
| * unhashed. Thus either the sleeper wins and goes off CPU, or removal | |
| * wins and the sleeper aborts after testing with the lock. | |
| * | |
| * This also means we don't need any fences for the call below. | |
| */ | |
| inode_wake_up_bit(inode, __I_NEW); | |
| BUG_ON(inode_state_read_once(inode) != (I_FREEING | I_CLEAR)); | |
| destroy_inode(inode); | |
| } | |
| /* | |
| * dispose_list - dispose of the contents of a local list | |
| * @head: the head of the list to free | |
| * | |
| * Dispose-list gets a local list with local inodes in it, so it doesn't | |
| * need to worry about list corruption and SMP locks. | |
| */ | |
| static void dispose_list(struct list_head *head) | |
| { | |
| while (!list_empty(head)) { | |
| struct inode *inode; | |
| inode = list_first_entry(head, struct inode, i_lru); | |
| list_del_init(&inode->i_lru); | |
| evict(inode); | |
| cond_resched(); | |
| } | |
| } | |
| /** | |
| * evict_inodes - evict all evictable inodes for a superblock | |
| * @sb: superblock to operate on | |
| * | |
| * Make sure that no inodes with zero refcount are retained. This is | |
| * called by superblock shutdown after having SB_ACTIVE flag removed, | |
| * so any inode reaching zero refcount during or after that call will | |
| * be immediately evicted. | |
| */ | |
| void evict_inodes(struct super_block *sb) | |
| { | |
| struct inode *inode; | |
| LIST_HEAD(dispose); | |
| again: | |
| spin_lock(&sb->s_inode_list_lock); | |
| list_for_each_entry(inode, &sb->s_inodes, i_sb_list) { | |
| if (icount_read_once(inode)) | |
| continue; | |
| spin_lock(&inode->i_lock); | |
| if (icount_read(inode)) { | |
| spin_unlock(&inode->i_lock); | |
| continue; | |
| } | |
| if (inode_state_read(inode) & (I_NEW | I_FREEING | I_WILL_FREE)) { | |
| spin_unlock(&inode->i_lock); | |
| continue; | |
| } | |
| inode_state_set(inode, I_FREEING); | |
| inode_lru_list_del(inode); | |
| spin_unlock(&inode->i_lock); | |
| list_add(&inode->i_lru, &dispose); | |
| /* | |
| * We can have a ton of inodes to evict at unmount time given | |
| * enough memory, check to see if we need to go to sleep for a | |
| * bit so we don't livelock. | |
| */ | |
| if (need_resched()) { | |
| spin_unlock(&sb->s_inode_list_lock); | |
| cond_resched(); | |
| dispose_list(&dispose); | |
| goto again; | |
| } | |
| } | |
| spin_unlock(&sb->s_inode_list_lock); | |
| dispose_list(&dispose); | |
| } | |
| EXPORT_SYMBOL_GPL(evict_inodes); | |
| /* | |
| * Isolate the inode from the LRU in preparation for freeing it. | |
| * | |
| * If the inode has the I_REFERENCED flag set, then it means that it has been | |
| * used recently - the flag is set in iput_final(). When we encounter such an | |
| * inode, clear the flag and move it to the back of the LRU so it gets another | |
| * pass through the LRU before it gets reclaimed. This is necessary because of | |
| * the fact we are doing lazy LRU updates to minimise lock contention so the | |
| * LRU does not have strict ordering. Hence we don't want to reclaim inodes | |
| * with this flag set because they are the inodes that are out of order. | |
| */ | |
| static enum lru_status inode_lru_isolate(struct list_head *item, | |
| struct list_lru_one *lru, void *arg) | |
| { | |
| struct list_head *freeable = arg; | |
| struct inode *inode = container_of(item, struct inode, i_lru); | |
| /* | |
| * We are inverting the lru lock/inode->i_lock here, so use a | |
| * trylock. If we fail to get the lock, just skip it. | |
| */ | |
| if (!spin_trylock(&inode->i_lock)) | |
| return LRU_SKIP; | |
| /* | |
| * Inodes can get referenced, redirtied, or repopulated while | |
| * they're already on the LRU, and this can make them | |
| * unreclaimable for a while. Remove them lazily here; iput, | |
| * sync, or the last page cache deletion will requeue them. | |
| */ | |
| if (icount_read(inode) || | |
| (inode_state_read(inode) & ~I_REFERENCED) || | |
| !mapping_shrinkable(&inode->i_data)) { | |
| list_lru_isolate(lru, &inode->i_lru); | |
| spin_unlock(&inode->i_lock); | |
| this_cpu_dec(nr_unused); | |
| return LRU_REMOVED; | |
| } | |
| /* Recently referenced inodes get one more pass */ | |
| if (inode_state_read(inode) & I_REFERENCED) { | |
| inode_state_clear(inode, I_REFERENCED); | |
| spin_unlock(&inode->i_lock); | |
| return LRU_ROTATE; | |
| } | |
| /* | |
| * On highmem systems, mapping_shrinkable() permits dropping | |
| * page cache in order to free up struct inodes: lowmem might | |
| * be under pressure before the cache inside the highmem zone. | |
| */ | |
| if (!mapping_empty(&inode->i_data)) { | |
| unsigned long reap; | |
| inode_pin_lru_isolating(inode); | |
| spin_unlock(&inode->i_lock); | |
| spin_unlock(&lru->lock); | |
| reap = invalidate_mapping_pages(&inode->i_data, 0, -1); | |
| if (current_is_kswapd()) | |
| __count_vm_events(KSWAPD_INODESTEAL, reap); | |
| else | |
| __count_vm_events(PGINODESTEAL, reap); | |
| mm_account_reclaimed_pages(reap); | |
| inode_unpin_lru_isolating(inode); | |
| return LRU_RETRY; | |
| } | |
| WARN_ON(inode_state_read(inode) & I_NEW); | |
| inode_state_set(inode, I_FREEING); | |
| list_lru_isolate_move(lru, &inode->i_lru, freeable); | |
| spin_unlock(&inode->i_lock); | |
| this_cpu_dec(nr_unused); | |
| return LRU_REMOVED; | |
| } | |
| /* | |
| * Walk the superblock inode LRU for freeable inodes and attempt to free them. | |
| * This is called from the superblock shrinker function with a number of inodes | |
| * to trim from the LRU. Inodes to be freed are moved to a temporary list and | |
| * then are freed outside inode_lock by dispose_list(). | |
| */ | |
| long prune_icache_sb(struct super_block *sb, struct shrink_control *sc) | |
| { | |
| LIST_HEAD(freeable); | |
| long freed; | |
| freed = list_lru_shrink_walk(&sb->s_inode_lru, sc, | |
| inode_lru_isolate, &freeable); | |
| dispose_list(&freeable); | |
| return freed; | |
| } | |
| static void __wait_on_freeing_inode(struct inode *inode, bool hash_locked, bool rcu_locked); | |
| static bool igrab_from_hash(struct inode *inode); | |
| /* | |
| * Called with the inode lock held. | |
| */ | |
| static struct inode *find_inode(struct super_block *sb, | |
| struct hlist_head *head, | |
| int (*test)(struct inode *, void *), | |
| void *data, bool hash_locked, | |
| bool *isnew) | |
| { | |
| struct inode *inode = NULL; | |
| if (hash_locked) | |
| lockdep_assert_held(&inode_hash_lock); | |
| else | |
| lockdep_assert_not_held(&inode_hash_lock); | |
| rcu_read_lock(); | |
| repeat: | |
| hlist_for_each_entry_rcu(inode, head, i_hash) { | |
| if (inode->i_sb != sb) | |
| continue; | |
| if (!test(inode, data)) | |
| continue; | |
| if (igrab_from_hash(inode)) { | |
| rcu_read_unlock(); | |
| *isnew = false; | |
| return inode; | |
| } | |
| spin_lock(&inode->i_lock); | |
| if (inode_state_read(inode) & (I_FREEING | I_WILL_FREE)) { | |
| __wait_on_freeing_inode(inode, hash_locked, true); | |
| goto repeat; | |
| } | |
| if (unlikely(inode_state_read(inode) & I_CREATING)) { | |
| spin_unlock(&inode->i_lock); | |
| rcu_read_unlock(); | |
| return ERR_PTR(-ESTALE); | |
| } | |
| __iget(inode); | |
| *isnew = !!(inode_state_read(inode) & I_NEW); | |
| spin_unlock(&inode->i_lock); | |
| rcu_read_unlock(); | |
| return inode; | |
| } | |
| rcu_read_unlock(); | |
| return NULL; | |
| } | |
| /* | |
| * find_inode_fast is the fast path version of find_inode, see the comment at | |
| * iget_locked for details. | |
| */ | |
| static struct inode *find_inode_fast(struct super_block *sb, | |
| struct hlist_head *head, u64 ino, | |
| bool hash_locked, bool *isnew) | |
| { | |
| struct inode *inode = NULL; | |
| if (hash_locked) | |
| lockdep_assert_held(&inode_hash_lock); | |
| else | |
| lockdep_assert_not_held(&inode_hash_lock); | |
| rcu_read_lock(); | |
| repeat: | |
| hlist_for_each_entry_rcu(inode, head, i_hash) { | |
| if (inode->i_ino != ino) | |
| continue; | |
| if (inode->i_sb != sb) | |
| continue; | |
| if (igrab_from_hash(inode)) { | |
| rcu_read_unlock(); | |
| *isnew = false; | |
| return inode; | |
| } | |
| spin_lock(&inode->i_lock); | |
| if (inode_state_read(inode) & (I_FREEING | I_WILL_FREE)) { | |
| __wait_on_freeing_inode(inode, hash_locked, true); | |
| goto repeat; | |
| } | |
| if (unlikely(inode_state_read(inode) & I_CREATING)) { | |
| spin_unlock(&inode->i_lock); | |
| rcu_read_unlock(); | |
| return ERR_PTR(-ESTALE); | |
| } | |
| __iget(inode); | |
| *isnew = !!(inode_state_read(inode) & I_NEW); | |
| spin_unlock(&inode->i_lock); | |
| rcu_read_unlock(); | |
| return inode; | |
| } | |
| rcu_read_unlock(); | |
| return NULL; | |
| } | |
| /* | |
| * Each cpu owns a range of LAST_INO_BATCH numbers. | |
| * 'shared_last_ino' is dirtied only once out of LAST_INO_BATCH allocations, | |
| * to renew the exhausted range. | |
| * | |
| * This does not significantly increase overflow rate because every CPU can | |
| * consume at most LAST_INO_BATCH-1 unused inode numbers. So there is | |
| * NR_CPUS*(LAST_INO_BATCH-1) wastage. At 4096 and 1024, this is ~0.1% of the | |
| * 2^32 range, and is a worst-case. Even a 50% wastage would only increase | |
| * overflow rate by 2x, which does not seem too significant. | |
| * | |
| * On a 32bit, non LFS stat() call, glibc will generate an EOVERFLOW | |
| * error if st_ino won't fit in target struct field. Use 32bit counter | |
| * here to attempt to avoid that. | |
| */ | |
| #define LAST_INO_BATCH 1024 | |
| static DEFINE_PER_CPU(unsigned int, last_ino); | |
| unsigned int get_next_ino(void) | |
| { | |
| unsigned int *p = &get_cpu_var(last_ino); | |
| unsigned int res = *p; | |
| #ifdef CONFIG_SMP | |
| if (unlikely((res & (LAST_INO_BATCH-1)) == 0)) { | |
| static atomic_t shared_last_ino; | |
| int next = atomic_add_return(LAST_INO_BATCH, &shared_last_ino); | |
| res = next - LAST_INO_BATCH; | |
| } | |
| #endif | |
| res++; | |
| /* get_next_ino should not provide a 0 inode number */ | |
| if (unlikely(!res)) | |
| res++; | |
| *p = res; | |
| put_cpu_var(last_ino); | |
| return res; | |
| } | |
| EXPORT_SYMBOL(get_next_ino); | |
| /** | |
| * new_inode - obtain an inode | |
| * @sb: superblock | |
| * | |
| * Allocates a new inode for given superblock. The default gfp_mask | |
| * for allocations related to inode->i_mapping is GFP_HIGHUSER_MOVABLE. | |
| * If HIGHMEM pages are unsuitable or it is known that pages allocated | |
| * for the page cache are not reclaimable or migratable, | |
| * mapping_set_gfp_mask() must be called with suitable flags on the | |
| * newly created inode's mapping | |
| * | |
| */ | |
| struct inode *new_inode(struct super_block *sb) | |
| { | |
| struct inode *inode; | |
| inode = alloc_inode(sb); | |
| if (inode) | |
| inode_sb_list_add(inode); | |
| return inode; | |
| } | |
| EXPORT_SYMBOL(new_inode); | |
| #ifdef CONFIG_DEBUG_LOCK_ALLOC | |
| void lockdep_annotate_inode_mutex_key(struct inode *inode) | |
| { | |
| if (S_ISDIR(inode->i_mode)) { | |
| struct file_system_type *type = inode->i_sb->s_type; | |
| /* Set new key only if filesystem hasn't already changed it */ | |
| if (lockdep_match_class(&inode->i_rwsem, &type->i_mutex_key)) { | |
| /* | |
| * ensure nobody is actually holding i_rwsem | |
| */ | |
| init_rwsem(&inode->i_rwsem); | |
| lockdep_set_class(&inode->i_rwsem, | |
| &type->i_mutex_dir_key); | |
| } | |
| } | |
| } | |
| EXPORT_SYMBOL(lockdep_annotate_inode_mutex_key); | |
| #endif | |
| /** | |
| * unlock_new_inode - clear the I_NEW state and wake up any waiters | |
| * @inode: new inode to unlock | |
| * | |
| * Called when the inode is fully initialised to clear the new state of the | |
| * inode and wake up anyone waiting for the inode to finish initialisation. | |
| */ | |
| void unlock_new_inode(struct inode *inode) | |
| { | |
| lockdep_annotate_inode_mutex_key(inode); | |
| spin_lock(&inode->i_lock); | |
| WARN_ON(!(inode_state_read(inode) & I_NEW)); | |
| /* | |
| * Paired with igrab_from_hash() | |
| */ | |
| smp_wmb(); | |
| inode_state_clear(inode, I_NEW | I_CREATING); | |
| inode_wake_up_bit(inode, __I_NEW); | |
| spin_unlock(&inode->i_lock); | |
| } | |
| EXPORT_SYMBOL(unlock_new_inode); | |
| void discard_new_inode(struct inode *inode) | |
| { | |
| lockdep_annotate_inode_mutex_key(inode); | |
| spin_lock(&inode->i_lock); | |
| WARN_ON(!(inode_state_read(inode) & I_NEW)); | |
| /* | |
| * Paired with igrab_from_hash() | |
| */ | |
| smp_wmb(); | |
| inode_state_clear(inode, I_NEW); | |
| inode_wake_up_bit(inode, __I_NEW); | |
| spin_unlock(&inode->i_lock); | |
| iput(inode); | |
| } | |
| EXPORT_SYMBOL(discard_new_inode); | |
| /** | |
| * lock_two_nondirectories - take two i_mutexes on non-directory objects | |
| * | |
| * Lock any non-NULL argument. Passed objects must not be directories. | |
| * Zero, one or two objects may be locked by this function. | |
| * | |
| * @inode1: first inode to lock | |
| * @inode2: second inode to lock | |
| */ | |
| void lock_two_nondirectories(struct inode *inode1, struct inode *inode2) | |
| { | |
| if (inode1) | |
| WARN_ON_ONCE(S_ISDIR(inode1->i_mode)); | |
| if (inode2) | |
| WARN_ON_ONCE(S_ISDIR(inode2->i_mode)); | |
| if (inode1 > inode2) | |
| swap(inode1, inode2); | |
| if (inode1) | |
| inode_lock(inode1); | |
| if (inode2 && inode2 != inode1) | |
| inode_lock_nested(inode2, I_MUTEX_NONDIR2); | |
| } | |
| EXPORT_SYMBOL(lock_two_nondirectories); | |
| /** | |
| * unlock_two_nondirectories - release locks from lock_two_nondirectories() | |
| * @inode1: first inode to unlock | |
| * @inode2: second inode to unlock | |
| */ | |
| void unlock_two_nondirectories(struct inode *inode1, struct inode *inode2) | |
| { | |
| if (inode1) { | |
| WARN_ON_ONCE(S_ISDIR(inode1->i_mode)); | |
| inode_unlock(inode1); | |
| } | |
| if (inode2 && inode2 != inode1) { | |
| WARN_ON_ONCE(S_ISDIR(inode2->i_mode)); | |
| inode_unlock(inode2); | |
| } | |
| } | |
| EXPORT_SYMBOL(unlock_two_nondirectories); | |
| /** | |
| * inode_insert5 - obtain an inode from a mounted file system | |
| * @inode: pre-allocated inode to use for insert to cache | |
| * @hashval: hash value (usually inode number) to get | |
| * @test: callback used for comparisons between inodes | |
| * @set: callback used to initialize a new struct inode | |
| * @data: opaque data pointer to pass to @test and @set | |
| * | |
| * Search for the inode specified by @hashval and @data in the inode cache, | |
| * and if present return it with an increased reference count. This is a | |
| * variant of iget5_locked() that doesn't allocate an inode. | |
| * | |
| * If the inode is not present in the cache, insert the pre-allocated inode and | |
| * return it locked, hashed, and with the I_NEW flag set. The file system gets | |
| * to fill it in before unlocking it via unlock_new_inode(). | |
| * | |
| * Note that both @test and @set are called with the inode_hash_lock held, so | |
| * they can't sleep. | |
| */ | |
| struct inode *inode_insert5(struct inode *inode, u64 hashval, | |
| int (*test)(struct inode *, void *), | |
| int (*set)(struct inode *, void *), void *data) | |
| { | |
| struct hlist_head *head = inode_hashtable + hash(inode->i_sb, hashval); | |
| struct inode *old; | |
| bool isnew; | |
| might_sleep(); | |
| again: | |
| spin_lock(&inode_hash_lock); | |
| old = find_inode(inode->i_sb, head, test, data, true, &isnew); | |
| if (unlikely(old)) { | |
| /* | |
| * Uhhuh, somebody else created the same inode under us. | |
| * Use the old inode instead of the preallocated one. | |
| */ | |
| spin_unlock(&inode_hash_lock); | |
| if (IS_ERR(old)) | |
| return NULL; | |
| if (unlikely(isnew)) | |
| wait_on_new_inode(old); | |
| if (unlikely(inode_unhashed(old))) { | |
| iput(old); | |
| goto again; | |
| } | |
| return old; | |
| } | |
| if (set && unlikely(set(inode, data))) { | |
| spin_unlock(&inode_hash_lock); | |
| return NULL; | |
| } | |
| /* | |
| * Return the locked inode with I_NEW set, the | |
| * caller is responsible for filling in the contents | |
| */ | |
| spin_lock(&inode->i_lock); | |
| inode_state_set(inode, I_NEW); | |
| hlist_add_head_rcu(&inode->i_hash, head); | |
| spin_unlock(&inode->i_lock); | |
| spin_unlock(&inode_hash_lock); | |
| /* | |
| * Add inode to the sb list if it's not already. It has I_NEW at this | |
| * point, so it should be safe to test i_sb_list locklessly. | |
| */ | |
| if (list_empty(&inode->i_sb_list)) | |
| inode_sb_list_add(inode); | |
| return inode; | |
| } | |
| EXPORT_SYMBOL(inode_insert5); | |
| /** | |
| * iget5_locked - obtain an inode from a mounted file system | |
| * @sb: super block of file system | |
| * @hashval: hash value (usually inode number) to get | |
| * @test: callback used for comparisons between inodes | |
| * @set: callback used to initialize a new struct inode | |
| * @data: opaque data pointer to pass to @test and @set | |
| * | |
| * Search for the inode specified by @hashval and @data in the inode cache, | |
| * and if present return it with an increased reference count. This is a | |
| * generalized version of iget_locked() for file systems where the inode | |
| * number is not sufficient for unique identification of an inode. | |
| * | |
| * If the inode is not present in the cache, allocate and insert a new inode | |
| * and return it locked, hashed, and with the I_NEW flag set. The file system | |
| * gets to fill it in before unlocking it via unlock_new_inode(). | |
| * | |
| * Note that both @test and @set are called with the inode_hash_lock held, so | |
| * they can't sleep. | |
| */ | |
| struct inode *iget5_locked(struct super_block *sb, u64 hashval, | |
| int (*test)(struct inode *, void *), | |
| int (*set)(struct inode *, void *), void *data) | |
| { | |
| struct inode *inode = ilookup5(sb, hashval, test, data); | |
| if (!inode) { | |
| struct inode *new = alloc_inode(sb); | |
| if (new) { | |
| inode = inode_insert5(new, hashval, test, set, data); | |
| if (unlikely(inode != new)) | |
| destroy_inode(new); | |
| } | |
| } | |
| return inode; | |
| } | |
| EXPORT_SYMBOL(iget5_locked); | |
| /** | |
| * iget5_locked_rcu - obtain an inode from a mounted file system | |
| * @sb: super block of file system | |
| * @hashval: hash value (usually inode number) to get | |
| * @test: callback used for comparisons between inodes | |
| * @set: callback used to initialize a new struct inode | |
| * @data: opaque data pointer to pass to @test and @set | |
| * | |
| * This is equivalent to iget5_locked, except the @test callback must | |
| * tolerate the inode not being stable, including being mid-teardown. | |
| */ | |
| struct inode *iget5_locked_rcu(struct super_block *sb, u64 hashval, | |
| int (*test)(struct inode *, void *), | |
| int (*set)(struct inode *, void *), void *data) | |
| { | |
| struct hlist_head *head = inode_hashtable + hash(sb, hashval); | |
| struct inode *inode, *new; | |
| bool isnew; | |
| might_sleep(); | |
| again: | |
| inode = find_inode(sb, head, test, data, false, &isnew); | |
| if (inode) { | |
| if (IS_ERR(inode)) | |
| return NULL; | |
| if (unlikely(isnew)) | |
| wait_on_new_inode(inode); | |
| if (unlikely(inode_unhashed(inode))) { | |
| iput(inode); | |
| goto again; | |
| } | |
| return inode; | |
| } | |
| new = alloc_inode(sb); | |
| if (new) { | |
| inode = inode_insert5(new, hashval, test, set, data); | |
| if (unlikely(inode != new)) | |
| destroy_inode(new); | |
| } | |
| return inode; | |
| } | |
| EXPORT_SYMBOL_GPL(iget5_locked_rcu); | |
| /** | |
| * iget_locked - obtain an inode from a mounted file system | |
| * @sb: super block of file system | |
| * @ino: inode number to get | |
| * | |
| * Search for the inode specified by @ino in the inode cache and if present | |
| * return it with an increased reference count. This is for file systems | |
| * where the inode number is sufficient for unique identification of an inode. | |
| * | |
| * If the inode is not in cache, allocate a new inode and return it locked, | |
| * hashed, and with the I_NEW flag set. The file system gets to fill it in | |
| * before unlocking it via unlock_new_inode(). | |
| */ | |
| struct inode *iget_locked(struct super_block *sb, u64 ino) | |
| { | |
| struct hlist_head *head = inode_hashtable + hash(sb, ino); | |
| struct inode *inode; | |
| bool isnew; | |
| might_sleep(); | |
| again: | |
| inode = find_inode_fast(sb, head, ino, false, &isnew); | |
| if (inode) { | |
| if (IS_ERR(inode)) | |
| return NULL; | |
| if (unlikely(isnew)) | |
| wait_on_new_inode(inode); | |
| if (unlikely(inode_unhashed(inode))) { | |
| iput(inode); | |
| goto again; | |
| } | |
| return inode; | |
| } | |
| inode = alloc_inode(sb); | |
| if (inode) { | |
| struct inode *old; | |
| spin_lock(&inode_hash_lock); | |
| /* We released the lock, so.. */ | |
| old = find_inode_fast(sb, head, ino, true, &isnew); | |
| if (!old) { | |
| inode->i_ino = ino; | |
| spin_lock(&inode->i_lock); | |
| inode_state_assign(inode, I_NEW); | |
| hlist_add_head_rcu(&inode->i_hash, head); | |
| spin_unlock(&inode->i_lock); | |
| spin_unlock(&inode_hash_lock); | |
| inode_sb_list_add(inode); | |
| /* Return the locked inode with I_NEW set, the | |
| * caller is responsible for filling in the contents | |
| */ | |
| return inode; | |
| } | |
| /* | |
| * Uhhuh, somebody else created the same inode under | |
| * us. Use the old inode instead of the one we just | |
| * allocated. | |
| */ | |
| spin_unlock(&inode_hash_lock); | |
| destroy_inode(inode); | |
| if (IS_ERR(old)) | |
| return NULL; | |
| inode = old; | |
| if (unlikely(isnew)) | |
| wait_on_new_inode(inode); | |
| if (unlikely(inode_unhashed(inode))) { | |
| iput(inode); | |
| goto again; | |
| } | |
| } | |
| return inode; | |
| } | |
| EXPORT_SYMBOL(iget_locked); | |
| /* | |
| * search the inode cache for a matching inode number. | |
| * If we find one, then the inode number we are trying to | |
| * allocate is not unique and so we should not use it. | |
| * | |
| * Returns 1 if the inode number is unique, 0 if it is not. | |
| */ | |
| static int test_inode_iunique(struct super_block *sb, u64 ino) | |
| { | |
| struct hlist_head *b = inode_hashtable + hash(sb, ino); | |
| struct inode *inode; | |
| hlist_for_each_entry_rcu(inode, b, i_hash) { | |
| if (inode->i_ino == ino && inode->i_sb == sb) | |
| return 0; | |
| } | |
| return 1; | |
| } | |
| /** | |
| * iunique - get a unique inode number | |
| * @sb: superblock | |
| * @max_reserved: highest reserved inode number | |
| * | |
| * Obtain an inode number that is unique on the system for a given | |
| * superblock. This is used by file systems that have no natural | |
| * permanent inode numbering system. An inode number is returned that | |
| * is higher than the reserved limit but unique. | |
| * | |
| * BUGS: | |
| * With a large number of inodes live on the file system this function | |
| * currently becomes quite slow. | |
| */ | |
| ino_t iunique(struct super_block *sb, ino_t max_reserved) | |
| { | |
| /* | |
| * On a 32bit, non LFS stat() call, glibc will generate an EOVERFLOW | |
| * error if st_ino won't fit in target struct field. Use 32bit counter | |
| * here to attempt to avoid that. | |
| */ | |
| static DEFINE_SPINLOCK(iunique_lock); | |
| static unsigned int counter; | |
| ino_t res; | |
| rcu_read_lock(); | |
| spin_lock(&iunique_lock); | |
| do { | |
| if (counter <= max_reserved) | |
| counter = max_reserved + 1; | |
| res = counter++; | |
| } while (!test_inode_iunique(sb, res)); | |
| spin_unlock(&iunique_lock); | |
| rcu_read_unlock(); | |
| return res; | |
| } | |
| EXPORT_SYMBOL(iunique); | |
| /** | |
| * ihold - get a reference on the inode, provided you already have one | |
| * @inode: inode to operate on | |
| */ | |
| void ihold(struct inode *inode) | |
| { | |
| VFS_BUG_ON_INODE(icount_read_once(inode) < 1, inode); | |
| WARN_ON(atomic_inc_return(&inode->i_count) < 2); | |
| } | |
| EXPORT_SYMBOL(ihold); | |
| struct inode *igrab(struct inode *inode) | |
| { | |
| /* | |
| * Read commentary above igrab_from_hash() for an explanation why this works. | |
| */ | |
| if (atomic_add_unless(&inode->i_count, 1, 0)) { | |
| VFS_BUG_ON_INODE(inode_state_read_once(inode) & (I_FREEING | I_WILL_FREE), inode); | |
| return inode; | |
| } | |
| spin_lock(&inode->i_lock); | |
| if (!(inode_state_read(inode) & (I_FREEING | I_WILL_FREE))) { | |
| __iget(inode); | |
| spin_unlock(&inode->i_lock); | |
| } else { | |
| spin_unlock(&inode->i_lock); | |
| /* | |
| * Handle the case where s_op->clear_inode is not been | |
| * called yet, and somebody is calling igrab | |
| * while the inode is getting freed. | |
| */ | |
| inode = NULL; | |
| } | |
| return inode; | |
| } | |
| EXPORT_SYMBOL(igrab); | |
| /* | |
| * igrab_from_hash - special inode refcount acquire primitive for the inode hash | |
| * | |
| * It provides lockless refcount acquire in the common case of no problematic | |
| * flags being set and the count being > 0. | |
| * | |
| * There are 4 state flags to worry about and the routine makes sure to not bump the | |
| * ref if any of them is present. | |
| * | |
| * I_NEW and I_CREATING can only legally get set *before* the inode becomes visible | |
| * during lookup. Thus if the flags are not spotted, they are guaranteed to not be | |
| * a factor. However, we need an acquire fence before returning the inode just | |
| * in case we raced against clearing the state to make sure our consumer picks up | |
| * any other changes made prior. atomic_add_unless provides a full fence, which | |
| * takes care of it. | |
| * | |
| * I_FREEING and I_WILL_FREE can only legally get set if ->i_count == 0 and it is | |
| * illegal to bump the ref if either is present. Consequently if atomic_add_unless | |
| * managed to replace a non-0 value with a bigger one, we have a guarantee neither | |
| * of these flags is set. Note this means explicitly checking of these flags below | |
| * is not necessary, it is only done because it does not cost anything on top of the | |
| * load which already needs to be done to handle the other flags. | |
| */ | |
| static bool igrab_from_hash(struct inode *inode) | |
| { | |
| if (inode_state_read_once(inode) & (I_NEW | I_CREATING | I_FREEING | I_WILL_FREE)) | |
| return false; | |
| /* | |
| * Paired with routines clearing I_NEW | |
| */ | |
| if (atomic_add_unless(&inode->i_count, 1, 0)) { | |
| VFS_BUG_ON_INODE(inode_state_read_once(inode) & (I_FREEING | I_WILL_FREE), inode); | |
| return true; | |
| } | |
| return false; | |
| } | |
| /** | |
| * ilookup5_nowait - search for an inode in the inode cache | |
| * @sb: super block of file system to search | |
| * @hashval: hash value (usually inode number) to search for | |
| * @test: callback used for comparisons between inodes | |
| * @data: opaque data pointer to pass to @test | |
| * @isnew: return argument telling whether I_NEW was set when | |
| * the inode was found in hash (the caller needs to | |
| * wait for I_NEW to clear) | |
| * | |
| * Search for the inode specified by @hashval and @data in the inode cache. | |
| * If the inode is in the cache, the inode is returned with an incremented | |
| * reference count. | |
| * | |
| * Note: I_NEW is not waited upon so you have to be very careful what you do | |
| * with the returned inode. You probably should be using ilookup5() instead. | |
| * | |
| * Note2: @test is called with the inode_hash_lock held, so can't sleep. | |
| */ | |
| struct inode *ilookup5_nowait(struct super_block *sb, u64 hashval, | |
| int (*test)(struct inode *, void *), void *data, bool *isnew) | |
| { | |
| struct hlist_head *head = inode_hashtable + hash(sb, hashval); | |
| struct inode *inode; | |
| spin_lock(&inode_hash_lock); | |
| inode = find_inode(sb, head, test, data, true, isnew); | |
| spin_unlock(&inode_hash_lock); | |
| return IS_ERR(inode) ? NULL : inode; | |
| } | |
| EXPORT_SYMBOL(ilookup5_nowait); | |
| /** | |
| * ilookup5 - search for an inode in the inode cache | |
| * @sb: super block of file system to search | |
| * @hashval: hash value (usually inode number) to search for | |
| * @test: callback used for comparisons between inodes | |
| * @data: opaque data pointer to pass to @test | |
| * | |
| * Search for the inode specified by @hashval and @data in the inode cache, | |
| * and if the inode is in the cache, return the inode with an incremented | |
| * reference count. Waits on I_NEW before returning the inode. | |
| * returned with an incremented reference count. | |
| * | |
| * This is a generalized version of ilookup() for file systems where the | |
| * inode number is not sufficient for unique identification of an inode. | |
| * | |
| * Note: @test is called with the inode_hash_lock held, so can't sleep. | |
| */ | |
| struct inode *ilookup5(struct super_block *sb, u64 hashval, | |
| int (*test)(struct inode *, void *), void *data) | |
| { | |
| struct inode *inode; | |
| bool isnew; | |
| might_sleep(); | |
| again: | |
| inode = ilookup5_nowait(sb, hashval, test, data, &isnew); | |
| if (inode) { | |
| if (unlikely(isnew)) | |
| wait_on_new_inode(inode); | |
| if (unlikely(inode_unhashed(inode))) { | |
| iput(inode); | |
| goto again; | |
| } | |
| } | |
| return inode; | |
| } | |
| EXPORT_SYMBOL(ilookup5); | |
| /** | |
| * ilookup - search for an inode in the inode cache | |
| * @sb: super block of file system to search | |
| * @ino: inode number to search for | |
| * | |
| * Search for the inode @ino in the inode cache, and if the inode is in the | |
| * cache, the inode is returned with an incremented reference count. | |
| */ | |
| struct inode *ilookup(struct super_block *sb, u64 ino) | |
| { | |
| struct hlist_head *head = inode_hashtable + hash(sb, ino); | |
| struct inode *inode; | |
| bool isnew; | |
| might_sleep(); | |
| again: | |
| inode = find_inode_fast(sb, head, ino, false, &isnew); | |
| if (inode) { | |
| if (IS_ERR(inode)) | |
| return NULL; | |
| if (unlikely(isnew)) | |
| wait_on_new_inode(inode); | |
| if (unlikely(inode_unhashed(inode))) { | |
| iput(inode); | |
| goto again; | |
| } | |
| } | |
| return inode; | |
| } | |
| EXPORT_SYMBOL(ilookup); | |
| /** | |
| * find_inode_nowait - find an inode in the inode cache | |
| * @sb: super block of file system to search | |
| * @hashval: hash value (usually inode number) to search for | |
| * @match: callback used for comparisons between inodes | |
| * @data: opaque data pointer to pass to @match | |
| * | |
| * Search for the inode specified by @hashval and @data in the inode | |
| * cache, where the helper function @match will return 0 if the inode | |
| * does not match, 1 if the inode does match, and -1 if the search | |
| * should be stopped. The @match function must be responsible for | |
| * taking the i_lock spin_lock and checking i_state for an inode being | |
| * freed or being initialized, and incrementing the reference count | |
| * before returning 1. It also must not sleep, since it is called with | |
| * the inode_hash_lock spinlock held. | |
| * | |
| * This is a even more generalized version of ilookup5() when the | |
| * function must never block --- find_inode() can block in | |
| * __wait_on_freeing_inode() --- or when the caller can not increment | |
| * the reference count because the resulting iput() might cause an | |
| * inode eviction. The tradeoff is that the @match funtion must be | |
| * very carefully implemented. | |
| */ | |
| struct inode *find_inode_nowait(struct super_block *sb, | |
| u64 hashval, | |
| int (*match)(struct inode *, u64, | |
| void *), | |
| void *data) | |
| { | |
| struct hlist_head *head = inode_hashtable + hash(sb, hashval); | |
| struct inode *inode, *ret_inode = NULL; | |
| int mval; | |
| spin_lock(&inode_hash_lock); | |
| hlist_for_each_entry(inode, head, i_hash) { | |
| if (inode->i_sb != sb) | |
| continue; | |
| mval = match(inode, hashval, data); | |
| if (mval == 0) | |
| continue; | |
| if (mval == 1) | |
| ret_inode = inode; | |
| goto out; | |
| } | |
| out: | |
| spin_unlock(&inode_hash_lock); | |
| return ret_inode; | |
| } | |
| EXPORT_SYMBOL(find_inode_nowait); | |
| /** | |
| * find_inode_rcu - find an inode in the inode cache | |
| * @sb: Super block of file system to search | |
| * @hashval: Key to hash | |
| * @test: Function to test match on an inode | |
| * @data: Data for test function | |
| * | |
| * Search for the inode specified by @hashval and @data in the inode cache, | |
| * where the helper function @test will return 0 if the inode does not match | |
| * and 1 if it does. The @test function must be responsible for taking the | |
| * i_lock spin_lock and checking i_state for an inode being freed or being | |
| * initialized. | |
| * | |
| * If successful, this will return the inode for which the @test function | |
| * returned 1 and NULL otherwise. | |
| * | |
| * The @test function is not permitted to take a ref on any inode presented. | |
| * It is also not permitted to sleep. | |
| * | |
| * The caller must hold the RCU read lock. | |
| */ | |
| struct inode *find_inode_rcu(struct super_block *sb, u64 hashval, | |
| int (*test)(struct inode *, void *), void *data) | |
| { | |
| struct hlist_head *head = inode_hashtable + hash(sb, hashval); | |
| struct inode *inode; | |
| RCU_LOCKDEP_WARN(!rcu_read_lock_held(), | |
| "suspicious find_inode_rcu() usage"); | |
| hlist_for_each_entry_rcu(inode, head, i_hash) { | |
| if (inode->i_sb == sb && | |
| !(inode_state_read_once(inode) & (I_FREEING | I_WILL_FREE)) && | |
| test(inode, data)) | |
| return inode; | |
| } | |
| return NULL; | |
| } | |
| EXPORT_SYMBOL(find_inode_rcu); | |
| /** | |
| * find_inode_by_ino_rcu - Find an inode in the inode cache | |
| * @sb: Super block of file system to search | |
| * @ino: The inode number to match | |
| * | |
| * Search for the inode specified by @hashval and @data in the inode cache, | |
| * where the helper function @test will return 0 if the inode does not match | |
| * and 1 if it does. The @test function must be responsible for taking the | |
| * i_lock spin_lock and checking i_state for an inode being freed or being | |
| * initialized. | |
| * | |
| * If successful, this will return the inode for which the @test function | |
| * returned 1 and NULL otherwise. | |
| * | |
| * The @test function is not permitted to take a ref on any inode presented. | |
| * It is also not permitted to sleep. | |
| * | |
| * The caller must hold the RCU read lock. | |
| */ | |
| struct inode *find_inode_by_ino_rcu(struct super_block *sb, | |
| u64 ino) | |
| { | |
| struct hlist_head *head = inode_hashtable + hash(sb, ino); | |
| struct inode *inode; | |
| RCU_LOCKDEP_WARN(!rcu_read_lock_held(), | |
| "suspicious find_inode_by_ino_rcu() usage"); | |
| hlist_for_each_entry_rcu(inode, head, i_hash) { | |
| if (inode->i_ino == ino && | |
| inode->i_sb == sb && | |
| !(inode_state_read_once(inode) & (I_FREEING | I_WILL_FREE))) | |
| return inode; | |
| } | |
| return NULL; | |
| } | |
| EXPORT_SYMBOL(find_inode_by_ino_rcu); | |
| int insert_inode_locked(struct inode *inode) | |
| { | |
| struct super_block *sb = inode->i_sb; | |
| u64 ino = inode->i_ino; | |
| struct hlist_head *head = inode_hashtable + hash(sb, ino); | |
| bool isnew; | |
| might_sleep(); | |
| while (1) { | |
| struct inode *old = NULL; | |
| spin_lock(&inode_hash_lock); | |
| repeat: | |
| hlist_for_each_entry(old, head, i_hash) { | |
| if (old->i_ino != ino) | |
| continue; | |
| if (old->i_sb != sb) | |
| continue; | |
| spin_lock(&old->i_lock); | |
| break; | |
| } | |
| if (likely(!old)) { | |
| spin_lock(&inode->i_lock); | |
| inode_state_set(inode, I_NEW | I_CREATING); | |
| hlist_add_head_rcu(&inode->i_hash, head); | |
| spin_unlock(&inode->i_lock); | |
| spin_unlock(&inode_hash_lock); | |
| return 0; | |
| } | |
| if (inode_state_read(old) & (I_FREEING | I_WILL_FREE)) { | |
| __wait_on_freeing_inode(old, true, false); | |
| old = NULL; | |
| goto repeat; | |
| } | |
| if (unlikely(inode_state_read(old) & I_CREATING)) { | |
| spin_unlock(&old->i_lock); | |
| spin_unlock(&inode_hash_lock); | |
| return -EBUSY; | |
| } | |
| __iget(old); | |
| isnew = !!(inode_state_read(old) & I_NEW); | |
| spin_unlock(&old->i_lock); | |
| spin_unlock(&inode_hash_lock); | |
| if (isnew) | |
| wait_on_new_inode(old); | |
| if (unlikely(!inode_unhashed(old))) { | |
| iput(old); | |
| return -EBUSY; | |
| } | |
| iput(old); | |
| } | |
| } | |
| EXPORT_SYMBOL(insert_inode_locked); | |
| int insert_inode_locked4(struct inode *inode, u64 hashval, | |
| int (*test)(struct inode *, void *), void *data) | |
| { | |
| struct inode *old; | |
| might_sleep(); | |
| inode_state_set_raw(inode, I_CREATING); | |
| old = inode_insert5(inode, hashval, test, NULL, data); | |
| if (old != inode) { | |
| iput(old); | |
| return -EBUSY; | |
| } | |
| return 0; | |
| } | |
| EXPORT_SYMBOL(insert_inode_locked4); | |
| int inode_just_drop(struct inode *inode) | |
| { | |
| return 1; | |
| } | |
| EXPORT_SYMBOL(inode_just_drop); | |
| /* | |
| * Called when we're dropping the last reference | |
| * to an inode. | |
| * | |
| * Call the FS "drop_inode()" function, defaulting to | |
| * the legacy UNIX filesystem behaviour. If it tells | |
| * us to evict inode, do so. Otherwise, retain inode | |
| * in cache if fs is alive, sync and evict if fs is | |
| * shutting down. | |
| */ | |
| static void iput_final(struct inode *inode) | |
| { | |
| struct super_block *sb = inode->i_sb; | |
| const struct super_operations *op = inode->i_sb->s_op; | |
| int drop; | |
| WARN_ON(inode_state_read(inode) & I_NEW); | |
| VFS_BUG_ON_INODE(icount_read(inode) != 0, inode); | |
| if (op->drop_inode) | |
| drop = op->drop_inode(inode); | |
| else | |
| drop = inode_generic_drop(inode); | |
| if (!drop && | |
| !(inode_state_read(inode) & I_DONTCACHE) && | |
| (sb->s_flags & SB_ACTIVE)) { | |
| __inode_lru_list_add(inode, true); | |
| spin_unlock(&inode->i_lock); | |
| return; | |
| } | |
| /* | |
| * Re-check ->i_count in case the ->drop_inode() hooks played games. | |
| * Note we only execute this if the verdict was to drop the inode. | |
| */ | |
| VFS_BUG_ON_INODE(icount_read(inode) != 0, inode); | |
| if (drop) { | |
| inode_state_set(inode, I_FREEING); | |
| } else { | |
| inode_state_set(inode, I_WILL_FREE); | |
| spin_unlock(&inode->i_lock); | |
| write_inode_now(inode, 1); | |
| spin_lock(&inode->i_lock); | |
| WARN_ON(inode_state_read(inode) & I_NEW); | |
| inode_state_replace(inode, I_WILL_FREE, I_FREEING); | |
| } | |
| inode_lru_list_del(inode); | |
| spin_unlock(&inode->i_lock); | |
| evict(inode); | |
| } | |
| /** | |
| * iput - put an inode | |
| * @inode: inode to put | |
| * | |
| * Puts an inode, dropping its usage count. If the inode use count hits | |
| * zero, the inode is then freed and may also be destroyed. | |
| * | |
| * Consequently, iput() can sleep. | |
| */ | |
| void iput(struct inode *inode) | |
| { | |
| might_sleep(); | |
| if (unlikely(!inode)) | |
| return; | |
| retry: | |
| lockdep_assert_not_held(&inode->i_lock); | |
| VFS_BUG_ON_INODE(inode_state_read_once(inode) & (I_FREEING | I_CLEAR), inode); | |
| /* | |
| * Note this assert is technically racy as if the count is bogusly | |
| * equal to one, then two CPUs racing to further drop it can both | |
| * conclude it's fine. | |
| */ | |
| VFS_BUG_ON_INODE(icount_read_once(inode) < 1, inode); | |
| if (atomic_add_unless(&inode->i_count, -1, 1)) | |
| return; | |
| if (inode->i_nlink && sync_lazytime(inode)) | |
| goto retry; | |
| spin_lock(&inode->i_lock); | |
| if (unlikely((inode_state_read(inode) & I_DIRTY_TIME) && inode->i_nlink)) { | |
| spin_unlock(&inode->i_lock); | |
| goto retry; | |
| } | |
| if (!atomic_dec_and_test(&inode->i_count)) { | |
| spin_unlock(&inode->i_lock); | |
| return; | |
| } | |
| /* | |
| * iput_final() drops ->i_lock, we can't assert on it as the inode may | |
| * be deallocated by the time the call returns. | |
| */ | |
| iput_final(inode); | |
| } | |
| EXPORT_SYMBOL(iput); | |
| /** | |
| * iput_not_last - put an inode assuming this is not the last reference | |
| * @inode: inode to put | |
| */ | |
| void iput_not_last(struct inode *inode) | |
| { | |
| VFS_BUG_ON_INODE(inode_state_read_once(inode) & (I_FREEING | I_CLEAR), inode); | |
| VFS_BUG_ON_INODE(icount_read_once(inode) < 2, inode); | |
| WARN_ON(atomic_sub_return(1, &inode->i_count) == 0); | |
| } | |
| EXPORT_SYMBOL(iput_not_last); | |
| #ifdef CONFIG_BLOCK | |
| /** | |
| * bmap - find a block number in a file | |
| * @inode: inode owning the block number being requested | |
| * @block: pointer containing the block to find | |
| * | |
| * Replaces the value in ``*block`` with the block number on the device holding | |
| * corresponding to the requested block number in the file. | |
| * That is, asked for block 4 of inode 1 the function will replace the | |
| * 4 in ``*block``, with disk block relative to the disk start that holds that | |
| * block of the file. | |
| * | |
| * Returns -EINVAL in case of error, 0 otherwise. If mapping falls into a | |
| * hole, returns 0 and ``*block`` is also set to 0. | |
| */ | |
| int bmap(struct inode *inode, sector_t *block) | |
| { | |
| if (!inode->i_mapping->a_ops->bmap) | |
| return -EINVAL; | |
| *block = inode->i_mapping->a_ops->bmap(inode->i_mapping, *block); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL(bmap); | |
| #endif | |
| /* | |
| * With relative atime, only update atime if the previous atime is | |
| * earlier than or equal to either the ctime or mtime, | |
| * or if at least a day has passed since the last atime update. | |
| */ | |
| static bool relatime_need_update(struct vfsmount *mnt, struct inode *inode, | |
| struct timespec64 now) | |
| { | |
| struct timespec64 atime, mtime, ctime; | |
| if (!(mnt->mnt_flags & MNT_RELATIME)) | |
| return true; | |
| /* | |
| * Is mtime younger than or equal to atime? If yes, update atime: | |
| */ | |
| atime = inode_get_atime(inode); | |
| mtime = inode_get_mtime(inode); | |
| if (timespec64_compare(&mtime, &atime) >= 0) | |
| return true; | |
| /* | |
| * Is ctime younger than or equal to atime? If yes, update atime: | |
| */ | |
| ctime = inode_get_ctime(inode); | |
| if (timespec64_compare(&ctime, &atime) >= 0) | |
| return true; | |
| /* | |
| * Is the previous atime value older than a day? If yes, | |
| * update atime: | |
| */ | |
| if ((long)(now.tv_sec - atime.tv_sec) >= 24*60*60) | |
| return true; | |
| /* | |
| * Good, we can skip the atime update: | |
| */ | |
| return false; | |
| } | |
| static int inode_update_atime(struct inode *inode) | |
| { | |
| struct timespec64 atime = inode_get_atime(inode); | |
| struct timespec64 now = current_time(inode); | |
| if (timespec64_equal(&now, &atime)) | |
| return 0; | |
| inode_set_atime_to_ts(inode, now); | |
| return inode_time_dirty_flag(inode); | |
| } | |
| static int inode_update_cmtime(struct inode *inode, unsigned int flags) | |
| { | |
| struct timespec64 ctime = inode_get_ctime(inode); | |
| struct timespec64 mtime = inode_get_mtime(inode); | |
| struct timespec64 now = inode_set_ctime_current(inode); | |
| unsigned int dirty = 0; | |
| bool mtime_changed; | |
| mtime_changed = !timespec64_equal(&now, &mtime); | |
| if (mtime_changed || !timespec64_equal(&now, &ctime)) | |
| dirty = inode_time_dirty_flag(inode); | |
| /* | |
| * Pure timestamp updates can be recorded in the inode without blocking | |
| * by not dirtying the inode. But when the file system requires | |
| * i_version updates, the update of i_version can still block. | |
| * Error out if we'd actually have to update i_version or don't support | |
| * lazytime. | |
| */ | |
| if (IS_I_VERSION(inode)) { | |
| if (flags & IOCB_NOWAIT) { | |
| if (!(inode->i_sb->s_flags & SB_LAZYTIME) || | |
| inode_iversion_need_inc(inode)) | |
| return -EAGAIN; | |
| } else { | |
| /* | |
| * Don't force iversion increment for pure lazytime | |
| * updates (I_DIRTY_TIME only), let I_VERSION_QUERIED | |
| * dictate whether the increment is needed. | |
| */ | |
| if (inode_maybe_inc_iversion(inode, | |
| dirty != I_DIRTY_TIME)) | |
| dirty |= I_DIRTY_SYNC; | |
| } | |
| } | |
| if (mtime_changed) | |
| inode_set_mtime_to_ts(inode, now); | |
| return dirty; | |
| } | |
| /** | |
| * inode_update_time - update either atime or c/mtime and i_version on the inode | |
| * @inode: inode to be updated | |
| * @type: timestamp to be updated | |
| * @flags: flags for the update | |
| * | |
| * Update either atime or c/mtime and version in a inode if needed for a file | |
| * access or modification. It is up to the caller to mark the inode dirty | |
| * appropriately. | |
| * | |
| * Returns the positive I_DIRTY_* flags for __mark_inode_dirty() if the inode | |
| * needs to be marked dirty, 0 if it did not, or a negative errno if an error | |
| * happened. | |
| */ | |
| int inode_update_time(struct inode *inode, enum fs_update_time type, | |
| unsigned int flags) | |
| { | |
| switch (type) { | |
| case FS_UPD_ATIME: | |
| return inode_update_atime(inode); | |
| case FS_UPD_CMTIME: | |
| return inode_update_cmtime(inode, flags); | |
| default: | |
| WARN_ON_ONCE(1); | |
| return -EIO; | |
| } | |
| } | |
| EXPORT_SYMBOL(inode_update_time); | |
| /** | |
| * generic_update_time - update the timestamps on the inode | |
| * @inode: inode to be updated | |
| * @type: timestamp to be updated | |
| * @flags: flags for the update | |
| * | |
| * Returns a negative error value on error, else 0. | |
| */ | |
| int generic_update_time(struct inode *inode, enum fs_update_time type, | |
| unsigned int flags) | |
| { | |
| int dirty; | |
| /* | |
| * ->dirty_inode is what could make generic timestamp updates block. | |
| * Don't support non-blocking timestamp updates here if it is set. | |
| * File systems that implement ->dirty_inode but want to support | |
| * non-blocking timestamp updates should call inode_update_time | |
| * directly. | |
| */ | |
| if ((flags & IOCB_NOWAIT) && inode->i_sb->s_op->dirty_inode) | |
| return -EAGAIN; | |
| dirty = inode_update_time(inode, type, flags); | |
| if (dirty <= 0) | |
| return dirty; | |
| __mark_inode_dirty(inode, dirty); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL(generic_update_time); | |
| /** | |
| * atime_needs_update - update the access time | |
| * @path: the &struct path to update | |
| * @inode: inode to update | |
| * | |
| * Update the accessed time on an inode and mark it for writeback. | |
| * This function automatically handles read only file systems and media, | |
| * as well as the "noatime" flag and inode specific "noatime" markers. | |
| */ | |
| bool atime_needs_update(const struct path *path, struct inode *inode) | |
| { | |
| struct vfsmount *mnt = path->mnt; | |
| struct timespec64 now, atime; | |
| if (inode->i_flags & S_NOATIME) | |
| return false; | |
| /* Atime updates will likely cause i_uid and i_gid to be written | |
| * back improprely if their true value is unknown to the vfs. | |
| */ | |
| if (HAS_UNMAPPED_ID(mnt_idmap(mnt), inode)) | |
| return false; | |
| if (IS_NOATIME(inode)) | |
| return false; | |
| if ((inode->i_sb->s_flags & SB_NODIRATIME) && S_ISDIR(inode->i_mode)) | |
| return false; | |
| if (mnt->mnt_flags & MNT_NOATIME) | |
| return false; | |
| if ((mnt->mnt_flags & MNT_NODIRATIME) && S_ISDIR(inode->i_mode)) | |
| return false; | |
| now = current_time(inode); | |
| if (!relatime_need_update(mnt, inode, now)) | |
| return false; | |
| atime = inode_get_atime(inode); | |
| if (timespec64_equal(&atime, &now)) | |
| return false; | |
| return true; | |
| } | |
| void touch_atime(const struct path *path) | |
| { | |
| struct vfsmount *mnt = path->mnt; | |
| struct inode *inode = d_inode(path->dentry); | |
| if (!atime_needs_update(path, inode)) | |
| return; | |
| if (!sb_start_write_trylock(inode->i_sb)) | |
| return; | |
| if (mnt_get_write_access(mnt) != 0) | |
| goto skip_update; | |
| /* | |
| * File systems can error out when updating inodes if they need to | |
| * allocate new space to modify an inode (such is the case for | |
| * Btrfs), but since we touch atime while walking down the path we | |
| * really don't care if we failed to update the atime of the file, | |
| * so just ignore the return value. | |
| * We may also fail on filesystems that have the ability to make parts | |
| * of the fs read only, e.g. subvolumes in Btrfs. | |
| */ | |
| if (inode->i_op->update_time) | |
| inode->i_op->update_time(inode, FS_UPD_ATIME, 0); | |
| else | |
| generic_update_time(inode, FS_UPD_ATIME, 0); | |
| mnt_put_write_access(mnt); | |
| skip_update: | |
| sb_end_write(inode->i_sb); | |
| } | |
| EXPORT_SYMBOL(touch_atime); | |
| /* | |
| * Return mask of changes for notify_change() that need to be done as a | |
| * response to write or truncate. Return 0 if nothing has to be changed. | |
| * Negative value on error (change should be denied). | |
| */ | |
| int dentry_needs_remove_privs(struct mnt_idmap *idmap, | |
| struct dentry *dentry) | |
| { | |
| struct inode *inode = d_inode(dentry); | |
| int mask = 0; | |
| int ret; | |
| if (IS_NOSEC(inode)) | |
| return 0; | |
| mask = setattr_should_drop_suidgid(idmap, inode); | |
| ret = security_inode_need_killpriv(dentry); | |
| if (ret < 0) | |
| return ret; | |
| if (ret) | |
| mask |= ATTR_KILL_PRIV; | |
| return mask; | |
| } | |
| static int __remove_privs(struct mnt_idmap *idmap, | |
| struct dentry *dentry, int kill) | |
| { | |
| struct iattr newattrs; | |
| newattrs.ia_valid = ATTR_FORCE | kill; | |
| /* | |
| * Note we call this on write, so notify_change will not | |
| * encounter any conflicting delegations: | |
| */ | |
| return notify_change(idmap, dentry, &newattrs, NULL); | |
| } | |
| static int file_remove_privs_flags(struct file *file, unsigned int flags) | |
| { | |
| struct dentry *dentry = file_dentry(file); | |
| struct inode *inode = file_inode(file); | |
| int error = 0; | |
| int kill; | |
| if (IS_NOSEC(inode) || !S_ISREG(inode->i_mode)) | |
| return 0; | |
| kill = dentry_needs_remove_privs(file_mnt_idmap(file), dentry); | |
| if (kill < 0) | |
| return kill; | |
| if (kill) { | |
| if (flags & IOCB_NOWAIT) | |
| return -EAGAIN; | |
| error = __remove_privs(file_mnt_idmap(file), dentry, kill); | |
| } | |
| if (!error) | |
| inode_has_no_xattr(inode); | |
| return error; | |
| } | |
| /** | |
| * file_remove_privs - remove special file privileges (suid, capabilities) | |
| * @file: file to remove privileges from | |
| * | |
| * When file is modified by a write or truncation ensure that special | |
| * file privileges are removed. | |
| * | |
| * Return: 0 on success, negative errno on failure. | |
| */ | |
| int file_remove_privs(struct file *file) | |
| { | |
| return file_remove_privs_flags(file, 0); | |
| } | |
| EXPORT_SYMBOL(file_remove_privs); | |
| /** | |
| * current_time - Return FS time (possibly fine-grained) | |
| * @inode: inode. | |
| * | |
| * Return the current time truncated to the time granularity supported by | |
| * the fs, as suitable for a ctime/mtime change. If the ctime is flagged | |
| * as having been QUERIED, get a fine-grained timestamp, but don't update | |
| * the floor. | |
| * | |
| * For a multigrain inode, this is effectively an estimate of the timestamp | |
| * that a file would receive. An actual update must go through | |
| * inode_set_ctime_current(). | |
| */ | |
| struct timespec64 current_time(struct inode *inode) | |
| { | |
| struct timespec64 now; | |
| u32 cns; | |
| ktime_get_coarse_real_ts64_mg(&now); | |
| if (!is_mgtime(inode)) | |
| goto out; | |
| /* If nothing has queried it, then coarse time is fine */ | |
| cns = smp_load_acquire(&inode->i_ctime_nsec); | |
| if (cns & I_CTIME_QUERIED) { | |
| /* | |
| * If there is no apparent change, then get a fine-grained | |
| * timestamp. | |
| */ | |
| if (now.tv_nsec == (cns & ~I_CTIME_QUERIED)) | |
| ktime_get_real_ts64(&now); | |
| } | |
| out: | |
| return timestamp_truncate(now, inode); | |
| } | |
| EXPORT_SYMBOL(current_time); | |
| static inline bool need_cmtime_update(struct inode *inode) | |
| { | |
| struct timespec64 now = current_time(inode), ts; | |
| ts = inode_get_mtime(inode); | |
| if (!timespec64_equal(&ts, &now)) | |
| return true; | |
| ts = inode_get_ctime(inode); | |
| if (!timespec64_equal(&ts, &now)) | |
| return true; | |
| return IS_I_VERSION(inode) && inode_iversion_need_inc(inode); | |
| } | |
| static int file_update_time_flags(struct file *file, unsigned int flags) | |
| { | |
| struct inode *inode = file_inode(file); | |
| int ret; | |
| /* First try to exhaust all avenues to not sync */ | |
| if (IS_NOCMTIME(inode)) | |
| return 0; | |
| if (unlikely(file->f_mode & FMODE_NOCMTIME)) | |
| return 0; | |
| if (!need_cmtime_update(inode)) | |
| return 0; | |
| flags &= IOCB_NOWAIT; | |
| if (mnt_get_write_access_file(file)) | |
| return 0; | |
| if (inode->i_op->update_time) | |
| ret = inode->i_op->update_time(inode, FS_UPD_CMTIME, flags); | |
| else | |
| ret = generic_update_time(inode, FS_UPD_CMTIME, flags); | |
| mnt_put_write_access_file(file); | |
| return ret; | |
| } | |
| /** | |
| * file_update_time - update mtime and ctime time | |
| * @file: file accessed | |
| * | |
| * Update the mtime and ctime members of an inode and mark the inode for | |
| * writeback. Note that this function is meant exclusively for usage in | |
| * the file write path of filesystems, and filesystems may choose to | |
| * explicitly ignore updates via this function with the _NOCMTIME inode | |
| * flag, e.g. for network filesystem where these imestamps are handled | |
| * by the server. This can return an error for file systems who need to | |
| * allocate space in order to update an inode. | |
| * | |
| * Return: 0 on success, negative errno on failure. | |
| */ | |
| int file_update_time(struct file *file) | |
| { | |
| return file_update_time_flags(file, 0); | |
| } | |
| EXPORT_SYMBOL(file_update_time); | |
| /** | |
| * file_modified_flags - handle mandated vfs changes when modifying a file | |
| * @file: file that was modified | |
| * @flags: kiocb flags | |
| * | |
| * When file has been modified ensure that special | |
| * file privileges are removed and time settings are updated. | |
| * | |
| * If IOCB_NOWAIT is set, special file privileges will not be removed and | |
| * time settings will not be updated. It will return -EAGAIN. | |
| * | |
| * Context: Caller must hold the file's inode lock. | |
| * | |
| * Return: 0 on success, negative errno on failure. | |
| */ | |
| static int file_modified_flags(struct file *file, int flags) | |
| { | |
| int ret; | |
| /* | |
| * Clear the security bits if the process is not being run by root. | |
| * This keeps people from modifying setuid and setgid binaries. | |
| */ | |
| ret = file_remove_privs_flags(file, flags); | |
| if (ret) | |
| return ret; | |
| return file_update_time_flags(file, flags); | |
| } | |
| /** | |
| * file_modified - handle mandated vfs changes when modifying a file | |
| * @file: file that was modified | |
| * | |
| * When file has been modified ensure that special | |
| * file privileges are removed and time settings are updated. | |
| * | |
| * Context: Caller must hold the file's inode lock. | |
| * | |
| * Return: 0 on success, negative errno on failure. | |
| */ | |
| int file_modified(struct file *file) | |
| { | |
| return file_modified_flags(file, 0); | |
| } | |
| EXPORT_SYMBOL(file_modified); | |
| /** | |
| * kiocb_modified - handle mandated vfs changes when modifying a file | |
| * @iocb: iocb that was modified | |
| * | |
| * When file has been modified ensure that special | |
| * file privileges are removed and time settings are updated. | |
| * | |
| * Context: Caller must hold the file's inode lock. | |
| * | |
| * Return: 0 on success, negative errno on failure. | |
| */ | |
| int kiocb_modified(struct kiocb *iocb) | |
| { | |
| return file_modified_flags(iocb->ki_filp, iocb->ki_flags); | |
| } | |
| EXPORT_SYMBOL_GPL(kiocb_modified); | |
| int inode_needs_sync(struct inode *inode) | |
| { | |
| if (IS_SYNC(inode)) | |
| return 1; | |
| if (S_ISDIR(inode->i_mode) && IS_DIRSYNC(inode)) | |
| return 1; | |
| return 0; | |
| } | |
| EXPORT_SYMBOL(inode_needs_sync); | |
| /* | |
| * If we try to find an inode in the inode hash while it is being | |
| * deleted, we have to wait until the filesystem completes its | |
| * deletion before reporting that it isn't found. This function waits | |
| * until the deletion _might_ have completed. Callers are responsible | |
| * to recheck inode state. | |
| * | |
| * It doesn't matter if I_NEW is not set initially, a call to | |
| * wake_up_bit(&inode->i_state, __I_NEW) after removing from the hash list | |
| * will DTRT. | |
| */ | |
| static void __wait_on_freeing_inode(struct inode *inode, bool hash_locked, bool rcu_locked) | |
| { | |
| struct wait_bit_queue_entry wqe; | |
| struct wait_queue_head *wq_head; | |
| VFS_BUG_ON(!hash_locked && !rcu_locked); | |
| /* | |
| * Handle racing against evict(), see that routine for more details. | |
| */ | |
| if (unlikely(inode_unhashed(inode))) { | |
| WARN_ON(hash_locked); | |
| spin_unlock(&inode->i_lock); | |
| return; | |
| } | |
| wq_head = inode_bit_waitqueue(&wqe, inode, __I_NEW); | |
| prepare_to_wait_event(wq_head, &wqe.wq_entry, TASK_UNINTERRUPTIBLE); | |
| spin_unlock(&inode->i_lock); | |
| if (rcu_locked) | |
| rcu_read_unlock(); | |
| if (hash_locked) | |
| spin_unlock(&inode_hash_lock); | |
| schedule(); | |
| finish_wait(wq_head, &wqe.wq_entry); | |
| if (hash_locked) | |
| spin_lock(&inode_hash_lock); | |
| if (rcu_locked) | |
| rcu_read_lock(); | |
| } | |
| static __initdata unsigned long ihash_entries; | |
| static int __init set_ihash_entries(char *str) | |
| { | |
| return kstrtoul(str, 0, &ihash_entries) == 0; | |
| } | |
| __setup("ihash_entries=", set_ihash_entries); | |
| /* | |
| * Initialize the waitqueues and inode hash table. | |
| */ | |
| void __init inode_init_early(void) | |
| { | |
| /* If hashes are distributed across NUMA nodes, defer | |
| * hash allocation until vmalloc space is available. | |
| */ | |
| if (hashdist) | |
| return; | |
| inode_hashtable = | |
| alloc_large_system_hash("Inode-cache", | |
| sizeof(struct hlist_head), | |
| ihash_entries, | |
| 14, | |
| HASH_EARLY | HASH_ZERO, | |
| &i_hash_shift, | |
| &i_hash_mask, | |
| 0, | |
| 0); | |
| } | |
| void __init inode_init(void) | |
| { | |
| /* inode slab cache */ | |
| inode_cachep = kmem_cache_create("inode_cache", | |
| sizeof(struct inode), | |
| 0, | |
| (SLAB_RECLAIM_ACCOUNT|SLAB_PANIC| | |
| SLAB_ACCOUNT), | |
| init_once); | |
| /* Hash may have been set up in inode_init_early */ | |
| if (!hashdist) | |
| return; | |
| inode_hashtable = | |
| alloc_large_system_hash("Inode-cache", | |
| sizeof(struct hlist_head), | |
| ihash_entries, | |
| 14, | |
| HASH_ZERO, | |
| &i_hash_shift, | |
| &i_hash_mask, | |
| 0, | |
| 0); | |
| } | |
| void init_special_inode(struct inode *inode, umode_t mode, dev_t rdev) | |
| { | |
| inode->i_mode = mode; | |
| switch (inode->i_mode & S_IFMT) { | |
| case S_IFCHR: | |
| inode->i_fop = &def_chr_fops; | |
| inode->i_rdev = rdev; | |
| break; | |
| case S_IFBLK: | |
| if (IS_ENABLED(CONFIG_BLOCK)) | |
| inode->i_fop = &def_blk_fops; | |
| inode->i_rdev = rdev; | |
| break; | |
| case S_IFIFO: | |
| inode->i_fop = &pipefifo_fops; | |
| break; | |
| case S_IFSOCK: | |
| /* leave it no_open_fops */ | |
| break; | |
| default: | |
| pr_debug("init_special_inode: bogus i_mode (%o) for inode %s:%llu\n", | |
| mode, inode->i_sb->s_id, inode->i_ino); | |
| break; | |
| } | |
| } | |
| EXPORT_SYMBOL(init_special_inode); | |
| /** | |
| * inode_init_owner - Init uid,gid,mode for new inode according to posix standards | |
| * @idmap: idmap of the mount the inode was created from | |
| * @inode: New inode | |
| * @dir: Directory inode | |
| * @mode: mode of the new inode | |
| * | |
| * If the inode has been created through an idmapped mount the idmap of | |
| * the vfsmount must be passed through @idmap. This function will then take | |
| * care to map the inode according to @idmap before checking permissions | |
| * and initializing i_uid and i_gid. On non-idmapped mounts or if permission | |
| * checking is to be performed on the raw inode simply pass @nop_mnt_idmap. | |
| */ | |
| void inode_init_owner(struct mnt_idmap *idmap, struct inode *inode, | |
| const struct inode *dir, umode_t mode) | |
| { | |
| inode_fsuid_set(inode, idmap); | |
| if (dir && dir->i_mode & S_ISGID) { | |
| inode->i_gid = dir->i_gid; | |
| /* Directories are special, and always inherit S_ISGID */ | |
| if (S_ISDIR(mode)) | |
| mode |= S_ISGID; | |
| } else | |
| inode_fsgid_set(inode, idmap); | |
| inode->i_mode = mode; | |
| } | |
| EXPORT_SYMBOL(inode_init_owner); | |
| /** | |
| * inode_owner_or_capable - check current task permissions to inode | |
| * @idmap: idmap of the mount the inode was found from | |
| * @inode: inode being checked | |
| * | |
| * Return true if current either has CAP_FOWNER in a namespace with the | |
| * inode owner uid mapped, or owns the file. | |
| * | |
| * If the inode has been found through an idmapped mount the idmap of | |
| * the vfsmount must be passed through @idmap. This function will then take | |
| * care to map the inode according to @idmap before checking permissions. | |
| * On non-idmapped mounts or if permission checking is to be performed on the | |
| * raw inode simply pass @nop_mnt_idmap. | |
| */ | |
| bool inode_owner_or_capable(struct mnt_idmap *idmap, | |
| const struct inode *inode) | |
| { | |
| vfsuid_t vfsuid; | |
| struct user_namespace *ns; | |
| vfsuid = i_uid_into_vfsuid(idmap, inode); | |
| if (vfsuid_eq_kuid(vfsuid, current_fsuid())) | |
| return true; | |
| ns = current_user_ns(); | |
| if (vfsuid_has_mapping(ns, vfsuid) && ns_capable(ns, CAP_FOWNER)) | |
| return true; | |
| return false; | |
| } | |
| EXPORT_SYMBOL(inode_owner_or_capable); | |
| /* | |
| * Direct i/o helper functions | |
| */ | |
| bool inode_dio_finished(const struct inode *inode) | |
| { | |
| return atomic_read(&inode->i_dio_count) == 0; | |
| } | |
| EXPORT_SYMBOL(inode_dio_finished); | |
| /** | |
| * inode_dio_wait - wait for outstanding DIO requests to finish | |
| * @inode: inode to wait for | |
| * | |
| * Waits for all pending direct I/O requests to finish so that we can | |
| * proceed with a truncate or equivalent operation. | |
| * | |
| * Must be called under a lock that serializes taking new references | |
| * to i_dio_count, usually by inode->i_rwsem. | |
| */ | |
| void inode_dio_wait(struct inode *inode) | |
| { | |
| wait_var_event(&inode->i_dio_count, inode_dio_finished(inode)); | |
| } | |
| EXPORT_SYMBOL(inode_dio_wait); | |
| void inode_dio_wait_interruptible(struct inode *inode) | |
| { | |
| wait_var_event_interruptible(&inode->i_dio_count, | |
| inode_dio_finished(inode)); | |
| } | |
| EXPORT_SYMBOL(inode_dio_wait_interruptible); | |
| /* | |
| * inode_set_flags - atomically set some inode flags | |
| * | |
| * Note: the caller should be holding i_rwsem exclusively, or else be sure that | |
| * they have exclusive access to the inode structure (i.e., while the | |
| * inode is being instantiated). The reason for the cmpxchg() loop | |
| * --- which wouldn't be necessary if all code paths which modify | |
| * i_flags actually followed this rule, is that there is at least one | |
| * code path which doesn't today so we use cmpxchg() out of an abundance | |
| * of caution. | |
| * | |
| * In the long run, i_rwsem is overkill, and we should probably look | |
| * at using the i_lock spinlock to protect i_flags, and then make sure | |
| * it is so documented in include/linux/fs.h and that all code follows | |
| * the locking convention!! | |
| */ | |
| void inode_set_flags(struct inode *inode, unsigned int flags, | |
| unsigned int mask) | |
| { | |
| WARN_ON_ONCE(flags & ~mask); | |
| set_mask_bits(&inode->i_flags, mask, flags); | |
| } | |
| EXPORT_SYMBOL(inode_set_flags); | |
| void inode_nohighmem(struct inode *inode) | |
| { | |
| mapping_set_gfp_mask(inode->i_mapping, GFP_USER); | |
| } | |
| EXPORT_SYMBOL(inode_nohighmem); | |
| struct timespec64 inode_set_ctime_to_ts(struct inode *inode, struct timespec64 ts) | |
| { | |
| trace_inode_set_ctime_to_ts(inode, &ts); | |
| set_normalized_timespec64(&ts, ts.tv_sec, ts.tv_nsec); | |
| WRITE_ONCE(inode->i_ctime_sec, ts.tv_sec); | |
| WRITE_ONCE(inode->i_ctime_nsec, ts.tv_nsec); | |
| return ts; | |
| } | |
| EXPORT_SYMBOL(inode_set_ctime_to_ts); | |
| /** | |
| * timestamp_truncate - Truncate timespec to a granularity | |
| * @t: Timespec | |
| * @inode: inode being updated | |
| * | |
| * Truncate a timespec to the granularity supported by the fs | |
| * containing the inode. Always rounds down. gran must | |
| * not be 0 nor greater than a second (NSEC_PER_SEC, or 10^9 ns). | |
| */ | |
| struct timespec64 timestamp_truncate(struct timespec64 t, struct inode *inode) | |
| { | |
| struct super_block *sb = inode->i_sb; | |
| unsigned int gran = sb->s_time_gran; | |
| t.tv_sec = clamp(t.tv_sec, sb->s_time_min, sb->s_time_max); | |
| if (unlikely(t.tv_sec == sb->s_time_max || t.tv_sec == sb->s_time_min)) | |
| t.tv_nsec = 0; | |
| /* Avoid division in the common cases 1 ns and 1 s. */ | |
| if (gran == 1) | |
| ; /* nothing */ | |
| else if (gran == NSEC_PER_SEC) | |
| t.tv_nsec = 0; | |
| else if (gran > 1 && gran < NSEC_PER_SEC) | |
| t.tv_nsec -= t.tv_nsec % gran; | |
| else | |
| WARN(1, "invalid file time granularity: %u", gran); | |
| return t; | |
| } | |
| EXPORT_SYMBOL(timestamp_truncate); | |
| /** | |
| * inode_set_ctime_current - set the ctime to current_time | |
| * @inode: inode | |
| * | |
| * Set the inode's ctime to the current value for the inode. Returns the | |
| * current value that was assigned. If this is not a multigrain inode, then we | |
| * set it to the later of the coarse time and floor value. | |
| * | |
| * If it is multigrain, then we first see if the coarse-grained timestamp is | |
| * distinct from what is already there. If so, then use that. Otherwise, get a | |
| * fine-grained timestamp. | |
| * | |
| * After that, try to swap the new value into i_ctime_nsec. Accept the | |
| * resulting ctime, regardless of the outcome of the swap. If it has | |
| * already been replaced, then that timestamp is later than the earlier | |
| * unacceptable one, and is thus acceptable. | |
| */ | |
| struct timespec64 inode_set_ctime_current(struct inode *inode) | |
| { | |
| struct timespec64 now; | |
| u32 cns, cur; | |
| ktime_get_coarse_real_ts64_mg(&now); | |
| now = timestamp_truncate(now, inode); | |
| /* Just return that if this is not a multigrain fs */ | |
| if (!is_mgtime(inode)) { | |
| inode_set_ctime_to_ts(inode, now); | |
| goto out; | |
| } | |
| /* | |
| * A fine-grained time is only needed if someone has queried | |
| * for timestamps, and the current coarse grained time isn't | |
| * later than what's already there. | |
| */ | |
| cns = smp_load_acquire(&inode->i_ctime_nsec); | |
| if (cns & I_CTIME_QUERIED) { | |
| struct timespec64 ctime = { .tv_sec = inode_get_ctime_sec(inode), | |
| .tv_nsec = cns & ~I_CTIME_QUERIED }; | |
| if (timespec64_compare(&now, &ctime) <= 0) { | |
| ktime_get_real_ts64_mg(&now); | |
| now = timestamp_truncate(now, inode); | |
| mgtime_counter_inc(mg_fine_stamps); | |
| } | |
| } | |
| mgtime_counter_inc(mg_ctime_updates); | |
| /* No need to cmpxchg if it's exactly the same */ | |
| if (cns == now.tv_nsec && inode_get_ctime_sec(inode) == now.tv_sec) { | |
| trace_ctime_xchg_skip(inode, &now); | |
| goto out; | |
| } | |
| cur = cns; | |
| retry: | |
| /* Try to swap the nsec value into place. */ | |
| if (try_cmpxchg(&inode->i_ctime_nsec, &cur, now.tv_nsec)) { | |
| /* If swap occurred, then we're (mostly) done */ | |
| WRITE_ONCE(inode->i_ctime_sec, now.tv_sec); | |
| trace_ctime_ns_xchg(inode, cns, now.tv_nsec, cur); | |
| mgtime_counter_inc(mg_ctime_swaps); | |
| } else { | |
| /* | |
| * Was the change due to someone marking the old ctime QUERIED? | |
| * If so then retry the swap. This can only happen once since | |
| * the only way to clear I_CTIME_QUERIED is to stamp the inode | |
| * with a new ctime. | |
| */ | |
| if (!(cns & I_CTIME_QUERIED) && (cns | I_CTIME_QUERIED) == cur) { | |
| cns = cur; | |
| goto retry; | |
| } | |
| /* Otherwise, keep the existing ctime */ | |
| now.tv_sec = inode_get_ctime_sec(inode); | |
| now.tv_nsec = cur & ~I_CTIME_QUERIED; | |
| } | |
| out: | |
| return now; | |
| } | |
| EXPORT_SYMBOL(inode_set_ctime_current); | |
| /** | |
| * inode_set_ctime_deleg - try to update the ctime on a delegated inode | |
| * @inode: inode to update | |
| * @update: timespec64 to set the ctime | |
| * | |
| * Attempt to atomically update the ctime on behalf of a delegation holder. | |
| * | |
| * The nfs server can call back the holder of a delegation to get updated | |
| * inode attributes, including the mtime. When updating the mtime, update | |
| * the ctime to a value at least equal to that. | |
| * | |
| * This can race with concurrent updates to the inode, in which | |
| * case the update is skipped. | |
| * | |
| * Note that this works even when multigrain timestamps are not enabled, | |
| * so it is used in either case. | |
| */ | |
| struct timespec64 inode_set_ctime_deleg(struct inode *inode, struct timespec64 update) | |
| { | |
| struct timespec64 now, cur_ts; | |
| u32 cur, old; | |
| /* pairs with try_cmpxchg below */ | |
| cur = smp_load_acquire(&inode->i_ctime_nsec); | |
| cur_ts.tv_nsec = cur & ~I_CTIME_QUERIED; | |
| cur_ts.tv_sec = inode_get_ctime_sec(inode); | |
| /* If the update is older than the existing value, skip it. */ | |
| if (timespec64_compare(&update, &cur_ts) <= 0) | |
| return cur_ts; | |
| ktime_get_coarse_real_ts64_mg(&now); | |
| /* Clamp the update to "now" if it's in the future */ | |
| if (timespec64_compare(&update, &now) > 0) | |
| update = now; | |
| update = timestamp_truncate(update, inode); | |
| /* No need to update if the values are already the same */ | |
| if (timespec64_equal(&update, &cur_ts)) | |
| return cur_ts; | |
| /* | |
| * Try to swap the nsec value into place. If it fails, that means | |
| * it raced with an update due to a write or similar activity. That | |
| * stamp takes precedence, so just skip the update. | |
| */ | |
| retry: | |
| old = cur; | |
| if (try_cmpxchg(&inode->i_ctime_nsec, &cur, update.tv_nsec)) { | |
| WRITE_ONCE(inode->i_ctime_sec, update.tv_sec); | |
| mgtime_counter_inc(mg_ctime_swaps); | |
| return update; | |
| } | |
| /* | |
| * Was the change due to another task marking the old ctime QUERIED? | |
| * | |
| * If so, then retry the swap. This can only happen once since | |
| * the only way to clear I_CTIME_QUERIED is to stamp the inode | |
| * with a new ctime. | |
| */ | |
| if (!(old & I_CTIME_QUERIED) && (cur == (old | I_CTIME_QUERIED))) | |
| goto retry; | |
| /* Otherwise, it was a new timestamp. */ | |
| cur_ts.tv_sec = inode_get_ctime_sec(inode); | |
| cur_ts.tv_nsec = cur & ~I_CTIME_QUERIED; | |
| return cur_ts; | |
| } | |
| EXPORT_SYMBOL(inode_set_ctime_deleg); | |
| /** | |
| * in_group_or_capable - check whether caller is CAP_FSETID privileged | |
| * @idmap: idmap of the mount @inode was found from | |
| * @inode: inode to check | |
| * @vfsgid: the new/current vfsgid of @inode | |
| * | |
| * Check whether @vfsgid is in the caller's group list or if the caller is | |
| * privileged with CAP_FSETID over @inode. This can be used to determine | |
| * whether the setgid bit can be kept or must be dropped. | |
| * | |
| * Return: true if the caller is sufficiently privileged, false if not. | |
| */ | |
| bool in_group_or_capable(struct mnt_idmap *idmap, | |
| const struct inode *inode, vfsgid_t vfsgid) | |
| { | |
| if (vfsgid_in_group_p(vfsgid)) | |
| return true; | |
| if (capable_wrt_inode_uidgid(idmap, inode, CAP_FSETID)) | |
| return true; | |
| return false; | |
| } | |
| EXPORT_SYMBOL(in_group_or_capable); | |
| /** | |
| * mode_strip_sgid - handle the sgid bit for non-directories | |
| * @idmap: idmap of the mount the inode was created from | |
| * @dir: parent directory inode | |
| * @mode: mode of the file to be created in @dir | |
| * | |
| * If the @mode of the new file has both the S_ISGID and S_IXGRP bit | |
| * raised and @dir has the S_ISGID bit raised ensure that the caller is | |
| * either in the group of the parent directory or they have CAP_FSETID | |
| * in their user namespace and are privileged over the parent directory. | |
| * In all other cases, strip the S_ISGID bit from @mode. | |
| * | |
| * Return: the new mode to use for the file | |
| */ | |
| umode_t mode_strip_sgid(struct mnt_idmap *idmap, | |
| const struct inode *dir, umode_t mode) | |
| { | |
| if ((mode & (S_ISGID | S_IXGRP)) != (S_ISGID | S_IXGRP)) | |
| return mode; | |
| if (S_ISDIR(mode) || !dir || !(dir->i_mode & S_ISGID)) | |
| return mode; | |
| if (in_group_or_capable(idmap, dir, i_gid_into_vfsgid(idmap, dir))) | |
| return mode; | |
| return mode & ~S_ISGID; | |
| } | |
| EXPORT_SYMBOL(mode_strip_sgid); | |
| #ifdef CONFIG_DEBUG_VFS | |
| /** | |
| * dump_inode - dump an inode. | |
| * @inode: inode to dump | |
| * @reason: reason for dumping | |
| * | |
| * If inode is an invalid pointer, we don't want to crash accessing it, | |
| * so probe everything depending on it carefully with get_kernel_nofault(). | |
| */ | |
| void dump_inode(struct inode *inode, const char *reason) | |
| { | |
| struct super_block *sb; | |
| struct file_system_type *s_type; | |
| const char *fs_name_ptr; | |
| char fs_name[32] = {}; | |
| umode_t mode; | |
| unsigned short opflags; | |
| unsigned int flags; | |
| unsigned int state; | |
| int count; | |
| if (get_kernel_nofault(sb, &inode->i_sb) || | |
| get_kernel_nofault(mode, &inode->i_mode) || | |
| get_kernel_nofault(opflags, &inode->i_opflags) || | |
| get_kernel_nofault(flags, &inode->i_flags)) { | |
| pr_warn("%s: unreadable inode:%px\n", reason, inode); | |
| return; | |
| } | |
| state = inode_state_read_once(inode); | |
| count = icount_read_once(inode); | |
| if (!sb || | |
| get_kernel_nofault(s_type, &sb->s_type) || !s_type || | |
| get_kernel_nofault(fs_name_ptr, &s_type->name) || !fs_name_ptr || | |
| strncpy_from_kernel_nofault(fs_name, fs_name_ptr, sizeof(fs_name) - 1) < 0) | |
| strscpy(fs_name, "<unknown, sb unreadable>"); | |
| pr_warn("%s: inode:%px fs:%s mode:%ho opflags:%#x flags:%#x state:%#x count:%d\n", | |
| reason, inode, fs_name, mode, opflags, flags, state, count); | |
| } | |
| EXPORT_SYMBOL(dump_inode); | |
| #endif |