|  | // SPDX-License-Identifier: GPL-2.0 | 
|  | /* | 
|  | * Renesas R-Car GPIO Support | 
|  | * | 
|  | *  Copyright (C) 2014 Renesas Electronics Corporation | 
|  | *  Copyright (C) 2013 Magnus Damm | 
|  | */ | 
|  |  | 
|  | #include <linux/err.h> | 
|  | #include <linux/gpio/driver.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/io.h> | 
|  | #include <linux/ioport.h> | 
|  | #include <linux/irq.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/of.h> | 
|  | #include <linux/of_device.h> | 
|  | #include <linux/pinctrl/consumer.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/pm_runtime.h> | 
|  | #include <linux/spinlock.h> | 
|  | #include <linux/slab.h> | 
|  |  | 
|  | struct gpio_rcar_bank_info { | 
|  | u32 iointsel; | 
|  | u32 inoutsel; | 
|  | u32 outdt; | 
|  | u32 posneg; | 
|  | u32 edglevel; | 
|  | u32 bothedge; | 
|  | u32 intmsk; | 
|  | }; | 
|  |  | 
|  | struct gpio_rcar_priv { | 
|  | void __iomem *base; | 
|  | spinlock_t lock; | 
|  | struct device *dev; | 
|  | struct gpio_chip gpio_chip; | 
|  | struct irq_chip irq_chip; | 
|  | unsigned int irq_parent; | 
|  | atomic_t wakeup_path; | 
|  | bool has_outdtsel; | 
|  | bool has_both_edge_trigger; | 
|  | struct gpio_rcar_bank_info bank_info; | 
|  | }; | 
|  |  | 
|  | #define IOINTSEL 0x00	/* General IO/Interrupt Switching Register */ | 
|  | #define INOUTSEL 0x04	/* General Input/Output Switching Register */ | 
|  | #define OUTDT 0x08	/* General Output Register */ | 
|  | #define INDT 0x0c	/* General Input Register */ | 
|  | #define INTDT 0x10	/* Interrupt Display Register */ | 
|  | #define INTCLR 0x14	/* Interrupt Clear Register */ | 
|  | #define INTMSK 0x18	/* Interrupt Mask Register */ | 
|  | #define MSKCLR 0x1c	/* Interrupt Mask Clear Register */ | 
|  | #define POSNEG 0x20	/* Positive/Negative Logic Select Register */ | 
|  | #define EDGLEVEL 0x24	/* Edge/level Select Register */ | 
|  | #define FILONOFF 0x28	/* Chattering Prevention On/Off Register */ | 
|  | #define OUTDTSEL 0x40	/* Output Data Select Register */ | 
|  | #define BOTHEDGE 0x4c	/* One Edge/Both Edge Select Register */ | 
|  |  | 
|  | #define RCAR_MAX_GPIO_PER_BANK		32 | 
|  |  | 
|  | static inline u32 gpio_rcar_read(struct gpio_rcar_priv *p, int offs) | 
|  | { | 
|  | return ioread32(p->base + offs); | 
|  | } | 
|  |  | 
|  | static inline void gpio_rcar_write(struct gpio_rcar_priv *p, int offs, | 
|  | u32 value) | 
|  | { | 
|  | iowrite32(value, p->base + offs); | 
|  | } | 
|  |  | 
|  | static void gpio_rcar_modify_bit(struct gpio_rcar_priv *p, int offs, | 
|  | int bit, bool value) | 
|  | { | 
|  | u32 tmp = gpio_rcar_read(p, offs); | 
|  |  | 
|  | if (value) | 
|  | tmp |= BIT(bit); | 
|  | else | 
|  | tmp &= ~BIT(bit); | 
|  |  | 
|  | gpio_rcar_write(p, offs, tmp); | 
|  | } | 
|  |  | 
|  | static void gpio_rcar_irq_disable(struct irq_data *d) | 
|  | { | 
|  | struct gpio_chip *gc = irq_data_get_irq_chip_data(d); | 
|  | struct gpio_rcar_priv *p = gpiochip_get_data(gc); | 
|  |  | 
|  | gpio_rcar_write(p, INTMSK, ~BIT(irqd_to_hwirq(d))); | 
|  | } | 
|  |  | 
|  | static void gpio_rcar_irq_enable(struct irq_data *d) | 
|  | { | 
|  | struct gpio_chip *gc = irq_data_get_irq_chip_data(d); | 
|  | struct gpio_rcar_priv *p = gpiochip_get_data(gc); | 
|  |  | 
|  | gpio_rcar_write(p, MSKCLR, BIT(irqd_to_hwirq(d))); | 
|  | } | 
|  |  | 
|  | static void gpio_rcar_config_interrupt_input_mode(struct gpio_rcar_priv *p, | 
|  | unsigned int hwirq, | 
|  | bool active_high_rising_edge, | 
|  | bool level_trigger, | 
|  | bool both) | 
|  | { | 
|  | unsigned long flags; | 
|  |  | 
|  | /* follow steps in the GPIO documentation for | 
|  | * "Setting Edge-Sensitive Interrupt Input Mode" and | 
|  | * "Setting Level-Sensitive Interrupt Input Mode" | 
|  | */ | 
|  |  | 
|  | spin_lock_irqsave(&p->lock, flags); | 
|  |  | 
|  | /* Configure postive or negative logic in POSNEG */ | 
|  | gpio_rcar_modify_bit(p, POSNEG, hwirq, !active_high_rising_edge); | 
|  |  | 
|  | /* Configure edge or level trigger in EDGLEVEL */ | 
|  | gpio_rcar_modify_bit(p, EDGLEVEL, hwirq, !level_trigger); | 
|  |  | 
|  | /* Select one edge or both edges in BOTHEDGE */ | 
|  | if (p->has_both_edge_trigger) | 
|  | gpio_rcar_modify_bit(p, BOTHEDGE, hwirq, both); | 
|  |  | 
|  | /* Select "Interrupt Input Mode" in IOINTSEL */ | 
|  | gpio_rcar_modify_bit(p, IOINTSEL, hwirq, true); | 
|  |  | 
|  | /* Write INTCLR in case of edge trigger */ | 
|  | if (!level_trigger) | 
|  | gpio_rcar_write(p, INTCLR, BIT(hwirq)); | 
|  |  | 
|  | spin_unlock_irqrestore(&p->lock, flags); | 
|  | } | 
|  |  | 
|  | static int gpio_rcar_irq_set_type(struct irq_data *d, unsigned int type) | 
|  | { | 
|  | struct gpio_chip *gc = irq_data_get_irq_chip_data(d); | 
|  | struct gpio_rcar_priv *p = gpiochip_get_data(gc); | 
|  | unsigned int hwirq = irqd_to_hwirq(d); | 
|  |  | 
|  | dev_dbg(p->dev, "sense irq = %d, type = %d\n", hwirq, type); | 
|  |  | 
|  | switch (type & IRQ_TYPE_SENSE_MASK) { | 
|  | case IRQ_TYPE_LEVEL_HIGH: | 
|  | gpio_rcar_config_interrupt_input_mode(p, hwirq, true, true, | 
|  | false); | 
|  | break; | 
|  | case IRQ_TYPE_LEVEL_LOW: | 
|  | gpio_rcar_config_interrupt_input_mode(p, hwirq, false, true, | 
|  | false); | 
|  | break; | 
|  | case IRQ_TYPE_EDGE_RISING: | 
|  | gpio_rcar_config_interrupt_input_mode(p, hwirq, true, false, | 
|  | false); | 
|  | break; | 
|  | case IRQ_TYPE_EDGE_FALLING: | 
|  | gpio_rcar_config_interrupt_input_mode(p, hwirq, false, false, | 
|  | false); | 
|  | break; | 
|  | case IRQ_TYPE_EDGE_BOTH: | 
|  | if (!p->has_both_edge_trigger) | 
|  | return -EINVAL; | 
|  | gpio_rcar_config_interrupt_input_mode(p, hwirq, true, false, | 
|  | true); | 
|  | break; | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int gpio_rcar_irq_set_wake(struct irq_data *d, unsigned int on) | 
|  | { | 
|  | struct gpio_chip *gc = irq_data_get_irq_chip_data(d); | 
|  | struct gpio_rcar_priv *p = gpiochip_get_data(gc); | 
|  | int error; | 
|  |  | 
|  | if (p->irq_parent) { | 
|  | error = irq_set_irq_wake(p->irq_parent, on); | 
|  | if (error) { | 
|  | dev_dbg(p->dev, "irq %u doesn't support irq_set_wake\n", | 
|  | p->irq_parent); | 
|  | p->irq_parent = 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (on) | 
|  | atomic_inc(&p->wakeup_path); | 
|  | else | 
|  | atomic_dec(&p->wakeup_path); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static irqreturn_t gpio_rcar_irq_handler(int irq, void *dev_id) | 
|  | { | 
|  | struct gpio_rcar_priv *p = dev_id; | 
|  | u32 pending; | 
|  | unsigned int offset, irqs_handled = 0; | 
|  |  | 
|  | while ((pending = gpio_rcar_read(p, INTDT) & | 
|  | gpio_rcar_read(p, INTMSK))) { | 
|  | offset = __ffs(pending); | 
|  | gpio_rcar_write(p, INTCLR, BIT(offset)); | 
|  | generic_handle_irq(irq_find_mapping(p->gpio_chip.irq.domain, | 
|  | offset)); | 
|  | irqs_handled++; | 
|  | } | 
|  |  | 
|  | return irqs_handled ? IRQ_HANDLED : IRQ_NONE; | 
|  | } | 
|  |  | 
|  | static void gpio_rcar_config_general_input_output_mode(struct gpio_chip *chip, | 
|  | unsigned int gpio, | 
|  | bool output) | 
|  | { | 
|  | struct gpio_rcar_priv *p = gpiochip_get_data(chip); | 
|  | unsigned long flags; | 
|  |  | 
|  | /* follow steps in the GPIO documentation for | 
|  | * "Setting General Output Mode" and | 
|  | * "Setting General Input Mode" | 
|  | */ | 
|  |  | 
|  | spin_lock_irqsave(&p->lock, flags); | 
|  |  | 
|  | /* Configure postive logic in POSNEG */ | 
|  | gpio_rcar_modify_bit(p, POSNEG, gpio, false); | 
|  |  | 
|  | /* Select "General Input/Output Mode" in IOINTSEL */ | 
|  | gpio_rcar_modify_bit(p, IOINTSEL, gpio, false); | 
|  |  | 
|  | /* Select Input Mode or Output Mode in INOUTSEL */ | 
|  | gpio_rcar_modify_bit(p, INOUTSEL, gpio, output); | 
|  |  | 
|  | /* Select General Output Register to output data in OUTDTSEL */ | 
|  | if (p->has_outdtsel && output) | 
|  | gpio_rcar_modify_bit(p, OUTDTSEL, gpio, false); | 
|  |  | 
|  | spin_unlock_irqrestore(&p->lock, flags); | 
|  | } | 
|  |  | 
|  | static int gpio_rcar_request(struct gpio_chip *chip, unsigned offset) | 
|  | { | 
|  | struct gpio_rcar_priv *p = gpiochip_get_data(chip); | 
|  | int error; | 
|  |  | 
|  | error = pm_runtime_get_sync(p->dev); | 
|  | if (error < 0) | 
|  | return error; | 
|  |  | 
|  | error = pinctrl_gpio_request(chip->base + offset); | 
|  | if (error) | 
|  | pm_runtime_put(p->dev); | 
|  |  | 
|  | return error; | 
|  | } | 
|  |  | 
|  | static void gpio_rcar_free(struct gpio_chip *chip, unsigned offset) | 
|  | { | 
|  | struct gpio_rcar_priv *p = gpiochip_get_data(chip); | 
|  |  | 
|  | pinctrl_gpio_free(chip->base + offset); | 
|  |  | 
|  | /* | 
|  | * Set the GPIO as an input to ensure that the next GPIO request won't | 
|  | * drive the GPIO pin as an output. | 
|  | */ | 
|  | gpio_rcar_config_general_input_output_mode(chip, offset, false); | 
|  |  | 
|  | pm_runtime_put(p->dev); | 
|  | } | 
|  |  | 
|  | static int gpio_rcar_get_direction(struct gpio_chip *chip, unsigned int offset) | 
|  | { | 
|  | struct gpio_rcar_priv *p = gpiochip_get_data(chip); | 
|  |  | 
|  | return !(gpio_rcar_read(p, INOUTSEL) & BIT(offset)); | 
|  | } | 
|  |  | 
|  | static int gpio_rcar_direction_input(struct gpio_chip *chip, unsigned offset) | 
|  | { | 
|  | gpio_rcar_config_general_input_output_mode(chip, offset, false); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int gpio_rcar_get(struct gpio_chip *chip, unsigned offset) | 
|  | { | 
|  | u32 bit = BIT(offset); | 
|  |  | 
|  | /* testing on r8a7790 shows that INDT does not show correct pin state | 
|  | * when configured as output, so use OUTDT in case of output pins */ | 
|  | if (gpio_rcar_read(gpiochip_get_data(chip), INOUTSEL) & bit) | 
|  | return !!(gpio_rcar_read(gpiochip_get_data(chip), OUTDT) & bit); | 
|  | else | 
|  | return !!(gpio_rcar_read(gpiochip_get_data(chip), INDT) & bit); | 
|  | } | 
|  |  | 
|  | static void gpio_rcar_set(struct gpio_chip *chip, unsigned offset, int value) | 
|  | { | 
|  | struct gpio_rcar_priv *p = gpiochip_get_data(chip); | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&p->lock, flags); | 
|  | gpio_rcar_modify_bit(p, OUTDT, offset, value); | 
|  | spin_unlock_irqrestore(&p->lock, flags); | 
|  | } | 
|  |  | 
|  | static void gpio_rcar_set_multiple(struct gpio_chip *chip, unsigned long *mask, | 
|  | unsigned long *bits) | 
|  | { | 
|  | struct gpio_rcar_priv *p = gpiochip_get_data(chip); | 
|  | unsigned long flags; | 
|  | u32 val, bankmask; | 
|  |  | 
|  | bankmask = mask[0] & GENMASK(chip->ngpio - 1, 0); | 
|  | if (chip->valid_mask) | 
|  | bankmask &= chip->valid_mask[0]; | 
|  |  | 
|  | if (!bankmask) | 
|  | return; | 
|  |  | 
|  | spin_lock_irqsave(&p->lock, flags); | 
|  | val = gpio_rcar_read(p, OUTDT); | 
|  | val &= ~bankmask; | 
|  | val |= (bankmask & bits[0]); | 
|  | gpio_rcar_write(p, OUTDT, val); | 
|  | spin_unlock_irqrestore(&p->lock, flags); | 
|  | } | 
|  |  | 
|  | static int gpio_rcar_direction_output(struct gpio_chip *chip, unsigned offset, | 
|  | int value) | 
|  | { | 
|  | /* write GPIO value to output before selecting output mode of pin */ | 
|  | gpio_rcar_set(chip, offset, value); | 
|  | gpio_rcar_config_general_input_output_mode(chip, offset, true); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | struct gpio_rcar_info { | 
|  | bool has_outdtsel; | 
|  | bool has_both_edge_trigger; | 
|  | }; | 
|  |  | 
|  | static const struct gpio_rcar_info gpio_rcar_info_gen1 = { | 
|  | .has_outdtsel = false, | 
|  | .has_both_edge_trigger = false, | 
|  | }; | 
|  |  | 
|  | static const struct gpio_rcar_info gpio_rcar_info_gen2 = { | 
|  | .has_outdtsel = true, | 
|  | .has_both_edge_trigger = true, | 
|  | }; | 
|  |  | 
|  | static const struct of_device_id gpio_rcar_of_table[] = { | 
|  | { | 
|  | .compatible = "renesas,gpio-r8a7743", | 
|  | /* RZ/G1 GPIO is identical to R-Car Gen2. */ | 
|  | .data = &gpio_rcar_info_gen2, | 
|  | }, { | 
|  | .compatible = "renesas,gpio-r8a7790", | 
|  | .data = &gpio_rcar_info_gen2, | 
|  | }, { | 
|  | .compatible = "renesas,gpio-r8a7791", | 
|  | .data = &gpio_rcar_info_gen2, | 
|  | }, { | 
|  | .compatible = "renesas,gpio-r8a7792", | 
|  | .data = &gpio_rcar_info_gen2, | 
|  | }, { | 
|  | .compatible = "renesas,gpio-r8a7793", | 
|  | .data = &gpio_rcar_info_gen2, | 
|  | }, { | 
|  | .compatible = "renesas,gpio-r8a7794", | 
|  | .data = &gpio_rcar_info_gen2, | 
|  | }, { | 
|  | .compatible = "renesas,gpio-r8a7795", | 
|  | /* Gen3 GPIO is identical to Gen2. */ | 
|  | .data = &gpio_rcar_info_gen2, | 
|  | }, { | 
|  | .compatible = "renesas,gpio-r8a7796", | 
|  | /* Gen3 GPIO is identical to Gen2. */ | 
|  | .data = &gpio_rcar_info_gen2, | 
|  | }, { | 
|  | .compatible = "renesas,rcar-gen1-gpio", | 
|  | .data = &gpio_rcar_info_gen1, | 
|  | }, { | 
|  | .compatible = "renesas,rcar-gen2-gpio", | 
|  | .data = &gpio_rcar_info_gen2, | 
|  | }, { | 
|  | .compatible = "renesas,rcar-gen3-gpio", | 
|  | /* Gen3 GPIO is identical to Gen2. */ | 
|  | .data = &gpio_rcar_info_gen2, | 
|  | }, { | 
|  | .compatible = "renesas,gpio-rcar", | 
|  | .data = &gpio_rcar_info_gen1, | 
|  | }, { | 
|  | /* Terminator */ | 
|  | }, | 
|  | }; | 
|  |  | 
|  | MODULE_DEVICE_TABLE(of, gpio_rcar_of_table); | 
|  |  | 
|  | static int gpio_rcar_parse_dt(struct gpio_rcar_priv *p, unsigned int *npins) | 
|  | { | 
|  | struct device_node *np = p->dev->of_node; | 
|  | const struct gpio_rcar_info *info; | 
|  | struct of_phandle_args args; | 
|  | int ret; | 
|  |  | 
|  | info = of_device_get_match_data(p->dev); | 
|  | p->has_outdtsel = info->has_outdtsel; | 
|  | p->has_both_edge_trigger = info->has_both_edge_trigger; | 
|  |  | 
|  | ret = of_parse_phandle_with_fixed_args(np, "gpio-ranges", 3, 0, &args); | 
|  | *npins = ret == 0 ? args.args[2] : RCAR_MAX_GPIO_PER_BANK; | 
|  |  | 
|  | if (*npins == 0 || *npins > RCAR_MAX_GPIO_PER_BANK) { | 
|  | dev_warn(p->dev, "Invalid number of gpio lines %u, using %u\n", | 
|  | *npins, RCAR_MAX_GPIO_PER_BANK); | 
|  | *npins = RCAR_MAX_GPIO_PER_BANK; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int gpio_rcar_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct gpio_rcar_priv *p; | 
|  | struct resource *irq; | 
|  | struct gpio_chip *gpio_chip; | 
|  | struct irq_chip *irq_chip; | 
|  | struct device *dev = &pdev->dev; | 
|  | const char *name = dev_name(dev); | 
|  | unsigned int npins; | 
|  | int ret; | 
|  |  | 
|  | p = devm_kzalloc(dev, sizeof(*p), GFP_KERNEL); | 
|  | if (!p) | 
|  | return -ENOMEM; | 
|  |  | 
|  | p->dev = dev; | 
|  | spin_lock_init(&p->lock); | 
|  |  | 
|  | /* Get device configuration from DT node */ | 
|  | ret = gpio_rcar_parse_dt(p, &npins); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | platform_set_drvdata(pdev, p); | 
|  |  | 
|  | pm_runtime_enable(dev); | 
|  |  | 
|  | irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); | 
|  | if (!irq) { | 
|  | dev_err(dev, "missing IRQ\n"); | 
|  | ret = -EINVAL; | 
|  | goto err0; | 
|  | } | 
|  |  | 
|  | p->base = devm_platform_ioremap_resource(pdev, 0); | 
|  | if (IS_ERR(p->base)) { | 
|  | ret = PTR_ERR(p->base); | 
|  | goto err0; | 
|  | } | 
|  |  | 
|  | gpio_chip = &p->gpio_chip; | 
|  | gpio_chip->request = gpio_rcar_request; | 
|  | gpio_chip->free = gpio_rcar_free; | 
|  | gpio_chip->get_direction = gpio_rcar_get_direction; | 
|  | gpio_chip->direction_input = gpio_rcar_direction_input; | 
|  | gpio_chip->get = gpio_rcar_get; | 
|  | gpio_chip->direction_output = gpio_rcar_direction_output; | 
|  | gpio_chip->set = gpio_rcar_set; | 
|  | gpio_chip->set_multiple = gpio_rcar_set_multiple; | 
|  | gpio_chip->label = name; | 
|  | gpio_chip->parent = dev; | 
|  | gpio_chip->owner = THIS_MODULE; | 
|  | gpio_chip->base = -1; | 
|  | gpio_chip->ngpio = npins; | 
|  |  | 
|  | irq_chip = &p->irq_chip; | 
|  | irq_chip->name = name; | 
|  | irq_chip->parent_device = dev; | 
|  | irq_chip->irq_mask = gpio_rcar_irq_disable; | 
|  | irq_chip->irq_unmask = gpio_rcar_irq_enable; | 
|  | irq_chip->irq_set_type = gpio_rcar_irq_set_type; | 
|  | irq_chip->irq_set_wake = gpio_rcar_irq_set_wake; | 
|  | irq_chip->flags = IRQCHIP_SET_TYPE_MASKED | IRQCHIP_MASK_ON_SUSPEND; | 
|  |  | 
|  | ret = gpiochip_add_data(gpio_chip, p); | 
|  | if (ret) { | 
|  | dev_err(dev, "failed to add GPIO controller\n"); | 
|  | goto err0; | 
|  | } | 
|  |  | 
|  | ret = gpiochip_irqchip_add(gpio_chip, irq_chip, 0, handle_level_irq, | 
|  | IRQ_TYPE_NONE); | 
|  | if (ret) { | 
|  | dev_err(dev, "cannot add irqchip\n"); | 
|  | goto err1; | 
|  | } | 
|  |  | 
|  | p->irq_parent = irq->start; | 
|  | if (devm_request_irq(dev, irq->start, gpio_rcar_irq_handler, | 
|  | IRQF_SHARED, name, p)) { | 
|  | dev_err(dev, "failed to request IRQ\n"); | 
|  | ret = -ENOENT; | 
|  | goto err1; | 
|  | } | 
|  |  | 
|  | dev_info(dev, "driving %d GPIOs\n", npins); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err1: | 
|  | gpiochip_remove(gpio_chip); | 
|  | err0: | 
|  | pm_runtime_disable(dev); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int gpio_rcar_remove(struct platform_device *pdev) | 
|  | { | 
|  | struct gpio_rcar_priv *p = platform_get_drvdata(pdev); | 
|  |  | 
|  | gpiochip_remove(&p->gpio_chip); | 
|  |  | 
|  | pm_runtime_disable(&pdev->dev); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PM_SLEEP | 
|  | static int gpio_rcar_suspend(struct device *dev) | 
|  | { | 
|  | struct gpio_rcar_priv *p = dev_get_drvdata(dev); | 
|  |  | 
|  | p->bank_info.iointsel = gpio_rcar_read(p, IOINTSEL); | 
|  | p->bank_info.inoutsel = gpio_rcar_read(p, INOUTSEL); | 
|  | p->bank_info.outdt = gpio_rcar_read(p, OUTDT); | 
|  | p->bank_info.intmsk = gpio_rcar_read(p, INTMSK); | 
|  | p->bank_info.posneg = gpio_rcar_read(p, POSNEG); | 
|  | p->bank_info.edglevel = gpio_rcar_read(p, EDGLEVEL); | 
|  | if (p->has_both_edge_trigger) | 
|  | p->bank_info.bothedge = gpio_rcar_read(p, BOTHEDGE); | 
|  |  | 
|  | if (atomic_read(&p->wakeup_path)) | 
|  | device_set_wakeup_path(dev); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int gpio_rcar_resume(struct device *dev) | 
|  | { | 
|  | struct gpio_rcar_priv *p = dev_get_drvdata(dev); | 
|  | unsigned int offset; | 
|  | u32 mask; | 
|  |  | 
|  | for (offset = 0; offset < p->gpio_chip.ngpio; offset++) { | 
|  | if (!gpiochip_line_is_valid(&p->gpio_chip, offset)) | 
|  | continue; | 
|  |  | 
|  | mask = BIT(offset); | 
|  | /* I/O pin */ | 
|  | if (!(p->bank_info.iointsel & mask)) { | 
|  | if (p->bank_info.inoutsel & mask) | 
|  | gpio_rcar_direction_output( | 
|  | &p->gpio_chip, offset, | 
|  | !!(p->bank_info.outdt & mask)); | 
|  | else | 
|  | gpio_rcar_direction_input(&p->gpio_chip, | 
|  | offset); | 
|  | } else { | 
|  | /* Interrupt pin */ | 
|  | gpio_rcar_config_interrupt_input_mode( | 
|  | p, | 
|  | offset, | 
|  | !(p->bank_info.posneg & mask), | 
|  | !(p->bank_info.edglevel & mask), | 
|  | !!(p->bank_info.bothedge & mask)); | 
|  |  | 
|  | if (p->bank_info.intmsk & mask) | 
|  | gpio_rcar_write(p, MSKCLR, mask); | 
|  | } | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | #endif /* CONFIG_PM_SLEEP*/ | 
|  |  | 
|  | static SIMPLE_DEV_PM_OPS(gpio_rcar_pm_ops, gpio_rcar_suspend, gpio_rcar_resume); | 
|  |  | 
|  | static struct platform_driver gpio_rcar_device_driver = { | 
|  | .probe		= gpio_rcar_probe, | 
|  | .remove		= gpio_rcar_remove, | 
|  | .driver		= { | 
|  | .name	= "gpio_rcar", | 
|  | .pm     = &gpio_rcar_pm_ops, | 
|  | .of_match_table = of_match_ptr(gpio_rcar_of_table), | 
|  | } | 
|  | }; | 
|  |  | 
|  | module_platform_driver(gpio_rcar_device_driver); | 
|  |  | 
|  | MODULE_AUTHOR("Magnus Damm"); | 
|  | MODULE_DESCRIPTION("Renesas R-Car GPIO Driver"); | 
|  | MODULE_LICENSE("GPL v2"); |