|  | /* | 
|  | *  Loongson-2F/3A/3B GPIO Support | 
|  | * | 
|  | *  Copyright (c) 2008 Richard Liu,  STMicroelectronics	 <richard.liu@st.com> | 
|  | *  Copyright (c) 2008-2010 Arnaud Patard <apatard@mandriva.com> | 
|  | *  Copyright (c) 2013 Hongbing Hu <huhb@lemote.com> | 
|  | *  Copyright (c) 2014 Huacai Chen <chenhc@lemote.com> | 
|  | * | 
|  | *  This program is free software; you can redistribute it and/or modify | 
|  | *  it under the terms of the GNU General Public License as published by | 
|  | *  the Free Software Foundation; either version 2 of the License, or | 
|  | *  (at your option) any later version. | 
|  | */ | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/spinlock.h> | 
|  | #include <linux/err.h> | 
|  | #include <linux/gpio/driver.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/bitops.h> | 
|  | #include <asm/types.h> | 
|  | #include <loongson.h> | 
|  |  | 
|  | #define STLS2F_N_GPIO		4 | 
|  | #define STLS3A_N_GPIO		16 | 
|  |  | 
|  | #ifdef CONFIG_CPU_LOONGSON3 | 
|  | #define LOONGSON_N_GPIO	STLS3A_N_GPIO | 
|  | #else | 
|  | #define LOONGSON_N_GPIO	STLS2F_N_GPIO | 
|  | #endif | 
|  |  | 
|  | /* | 
|  | * Offset into the register where we read lines, we write them from offset 0. | 
|  | * This offset is the only thing that stand between us and using | 
|  | * GPIO_GENERIC. | 
|  | */ | 
|  | #define LOONGSON_GPIO_IN_OFFSET	16 | 
|  |  | 
|  | static DEFINE_SPINLOCK(gpio_lock); | 
|  |  | 
|  | static int loongson_gpio_get_value(struct gpio_chip *chip, unsigned gpio) | 
|  | { | 
|  | u32 val; | 
|  |  | 
|  | spin_lock(&gpio_lock); | 
|  | val = LOONGSON_GPIODATA; | 
|  | spin_unlock(&gpio_lock); | 
|  |  | 
|  | return !!(val & BIT(gpio + LOONGSON_GPIO_IN_OFFSET)); | 
|  | } | 
|  |  | 
|  | static void loongson_gpio_set_value(struct gpio_chip *chip, | 
|  | unsigned gpio, int value) | 
|  | { | 
|  | u32 val; | 
|  |  | 
|  | spin_lock(&gpio_lock); | 
|  | val = LOONGSON_GPIODATA; | 
|  | if (value) | 
|  | val |= BIT(gpio); | 
|  | else | 
|  | val &= ~BIT(gpio); | 
|  | LOONGSON_GPIODATA = val; | 
|  | spin_unlock(&gpio_lock); | 
|  | } | 
|  |  | 
|  | static int loongson_gpio_direction_input(struct gpio_chip *chip, unsigned gpio) | 
|  | { | 
|  | u32 temp; | 
|  |  | 
|  | spin_lock(&gpio_lock); | 
|  | temp = LOONGSON_GPIOIE; | 
|  | temp |= BIT(gpio); | 
|  | LOONGSON_GPIOIE = temp; | 
|  | spin_unlock(&gpio_lock); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int loongson_gpio_direction_output(struct gpio_chip *chip, | 
|  | unsigned gpio, int level) | 
|  | { | 
|  | u32 temp; | 
|  |  | 
|  | loongson_gpio_set_value(chip, gpio, level); | 
|  | spin_lock(&gpio_lock); | 
|  | temp = LOONGSON_GPIOIE; | 
|  | temp &= ~BIT(gpio); | 
|  | LOONGSON_GPIOIE = temp; | 
|  | spin_unlock(&gpio_lock); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int loongson_gpio_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct gpio_chip *gc; | 
|  | struct device *dev = &pdev->dev; | 
|  |  | 
|  | gc = devm_kzalloc(dev, sizeof(*gc), GFP_KERNEL); | 
|  | if (!gc) | 
|  | return -ENOMEM; | 
|  |  | 
|  | gc->label = "loongson-gpio-chip"; | 
|  | gc->base = 0; | 
|  | gc->ngpio = LOONGSON_N_GPIO; | 
|  | gc->get = loongson_gpio_get_value; | 
|  | gc->set = loongson_gpio_set_value; | 
|  | gc->direction_input = loongson_gpio_direction_input; | 
|  | gc->direction_output = loongson_gpio_direction_output; | 
|  |  | 
|  | return gpiochip_add_data(gc, NULL); | 
|  | } | 
|  |  | 
|  | static struct platform_driver loongson_gpio_driver = { | 
|  | .driver = { | 
|  | .name = "loongson-gpio", | 
|  | }, | 
|  | .probe = loongson_gpio_probe, | 
|  | }; | 
|  |  | 
|  | static int __init loongson_gpio_setup(void) | 
|  | { | 
|  | struct platform_device *pdev; | 
|  | int ret; | 
|  |  | 
|  | ret = platform_driver_register(&loongson_gpio_driver); | 
|  | if (ret) { | 
|  | pr_err("error registering loongson GPIO driver\n"); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | pdev = platform_device_register_simple("loongson-gpio", -1, NULL, 0); | 
|  | return PTR_ERR_OR_ZERO(pdev); | 
|  | } | 
|  | postcore_initcall(loongson_gpio_setup); |