| /* | 
 |  * A V4L2 driver for OmniVision OV5647 cameras. | 
 |  * | 
 |  * Based on Samsung S5K6AAFX SXGA 1/6" 1.3M CMOS Image Sensor driver | 
 |  * Copyright (C) 2011 Sylwester Nawrocki <s.nawrocki@samsung.com> | 
 |  * | 
 |  * Based on Omnivision OV7670 Camera Driver | 
 |  * Copyright (C) 2006-7 Jonathan Corbet <corbet@lwn.net> | 
 |  * | 
 |  * Copyright (C) 2016, Synopsys, Inc. | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or | 
 |  * modify it under the terms of the GNU General Public License as | 
 |  * published by the Free Software Foundation version 2. | 
 |  * | 
 |  * This program is distributed .as is. WITHOUT ANY WARRANTY of any | 
 |  * kind, whether express or implied; without even the implied warranty | 
 |  * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 |  * GNU General Public License for more details. | 
 |  */ | 
 |  | 
 | #include <linux/clk.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/i2c.h> | 
 | #include <linux/init.h> | 
 | #include <linux/io.h> | 
 | #include <linux/module.h> | 
 | #include <linux/of_graph.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/videodev2.h> | 
 | #include <media/v4l2-device.h> | 
 | #include <media/v4l2-fwnode.h> | 
 | #include <media/v4l2-image-sizes.h> | 
 | #include <media/v4l2-mediabus.h> | 
 |  | 
 | #define SENSOR_NAME "ov5647" | 
 |  | 
 | #define MIPI_CTRL00_CLOCK_LANE_GATE		BIT(5) | 
 | #define MIPI_CTRL00_BUS_IDLE			BIT(2) | 
 | #define MIPI_CTRL00_CLOCK_LANE_DISABLE		BIT(0) | 
 |  | 
 | #define OV5647_SW_STANDBY		0x0100 | 
 | #define OV5647_SW_RESET			0x0103 | 
 | #define OV5647_REG_CHIPID_H		0x300A | 
 | #define OV5647_REG_CHIPID_L		0x300B | 
 | #define OV5640_REG_PAD_OUT		0x300D | 
 | #define OV5647_REG_FRAME_OFF_NUMBER	0x4202 | 
 | #define OV5647_REG_MIPI_CTRL00		0x4800 | 
 | #define OV5647_REG_MIPI_CTRL14		0x4814 | 
 |  | 
 | #define REG_TERM 0xfffe | 
 | #define VAL_TERM 0xfe | 
 | #define REG_DLY  0xffff | 
 |  | 
 | #define OV5647_ROW_START		0x01 | 
 | #define OV5647_ROW_START_MIN		0 | 
 | #define OV5647_ROW_START_MAX		2004 | 
 | #define OV5647_ROW_START_DEF		54 | 
 |  | 
 | #define OV5647_COLUMN_START		0x02 | 
 | #define OV5647_COLUMN_START_MIN		0 | 
 | #define OV5647_COLUMN_START_MAX		2750 | 
 | #define OV5647_COLUMN_START_DEF		16 | 
 |  | 
 | #define OV5647_WINDOW_HEIGHT		0x03 | 
 | #define OV5647_WINDOW_HEIGHT_MIN	2 | 
 | #define OV5647_WINDOW_HEIGHT_MAX	2006 | 
 | #define OV5647_WINDOW_HEIGHT_DEF	1944 | 
 |  | 
 | #define OV5647_WINDOW_WIDTH		0x04 | 
 | #define OV5647_WINDOW_WIDTH_MIN		2 | 
 | #define OV5647_WINDOW_WIDTH_MAX		2752 | 
 | #define OV5647_WINDOW_WIDTH_DEF		2592 | 
 |  | 
 | struct regval_list { | 
 | 	u16 addr; | 
 | 	u8 data; | 
 | }; | 
 |  | 
 | struct ov5647 { | 
 | 	struct v4l2_subdev		sd; | 
 | 	struct media_pad		pad; | 
 | 	struct mutex			lock; | 
 | 	struct v4l2_mbus_framefmt	format; | 
 | 	unsigned int			width; | 
 | 	unsigned int			height; | 
 | 	int				power_count; | 
 | 	struct clk			*xclk; | 
 | }; | 
 |  | 
 | static inline struct ov5647 *to_state(struct v4l2_subdev *sd) | 
 | { | 
 | 	return container_of(sd, struct ov5647, sd); | 
 | } | 
 |  | 
 | static struct regval_list sensor_oe_disable_regs[] = { | 
 | 	{0x3000, 0x00}, | 
 | 	{0x3001, 0x00}, | 
 | 	{0x3002, 0x00}, | 
 | }; | 
 |  | 
 | static struct regval_list sensor_oe_enable_regs[] = { | 
 | 	{0x3000, 0x0f}, | 
 | 	{0x3001, 0xff}, | 
 | 	{0x3002, 0xe4}, | 
 | }; | 
 |  | 
 | static struct regval_list ov5647_640x480[] = { | 
 | 	{0x0100, 0x00}, | 
 | 	{0x0103, 0x01}, | 
 | 	{0x3034, 0x08}, | 
 | 	{0x3035, 0x21}, | 
 | 	{0x3036, 0x46}, | 
 | 	{0x303c, 0x11}, | 
 | 	{0x3106, 0xf5}, | 
 | 	{0x3821, 0x07}, | 
 | 	{0x3820, 0x41}, | 
 | 	{0x3827, 0xec}, | 
 | 	{0x370c, 0x0f}, | 
 | 	{0x3612, 0x59}, | 
 | 	{0x3618, 0x00}, | 
 | 	{0x5000, 0x06}, | 
 | 	{0x5001, 0x01}, | 
 | 	{0x5002, 0x41}, | 
 | 	{0x5003, 0x08}, | 
 | 	{0x5a00, 0x08}, | 
 | 	{0x3000, 0x00}, | 
 | 	{0x3001, 0x00}, | 
 | 	{0x3002, 0x00}, | 
 | 	{0x3016, 0x08}, | 
 | 	{0x3017, 0xe0}, | 
 | 	{0x3018, 0x44}, | 
 | 	{0x301c, 0xf8}, | 
 | 	{0x301d, 0xf0}, | 
 | 	{0x3a18, 0x00}, | 
 | 	{0x3a19, 0xf8}, | 
 | 	{0x3c01, 0x80}, | 
 | 	{0x3b07, 0x0c}, | 
 | 	{0x380c, 0x07}, | 
 | 	{0x380d, 0x68}, | 
 | 	{0x380e, 0x03}, | 
 | 	{0x380f, 0xd8}, | 
 | 	{0x3814, 0x31}, | 
 | 	{0x3815, 0x31}, | 
 | 	{0x3708, 0x64}, | 
 | 	{0x3709, 0x52}, | 
 | 	{0x3808, 0x02}, | 
 | 	{0x3809, 0x80}, | 
 | 	{0x380a, 0x01}, | 
 | 	{0x380b, 0xE0}, | 
 | 	{0x3801, 0x00}, | 
 | 	{0x3802, 0x00}, | 
 | 	{0x3803, 0x00}, | 
 | 	{0x3804, 0x0a}, | 
 | 	{0x3805, 0x3f}, | 
 | 	{0x3806, 0x07}, | 
 | 	{0x3807, 0xa1}, | 
 | 	{0x3811, 0x08}, | 
 | 	{0x3813, 0x02}, | 
 | 	{0x3630, 0x2e}, | 
 | 	{0x3632, 0xe2}, | 
 | 	{0x3633, 0x23}, | 
 | 	{0x3634, 0x44}, | 
 | 	{0x3636, 0x06}, | 
 | 	{0x3620, 0x64}, | 
 | 	{0x3621, 0xe0}, | 
 | 	{0x3600, 0x37}, | 
 | 	{0x3704, 0xa0}, | 
 | 	{0x3703, 0x5a}, | 
 | 	{0x3715, 0x78}, | 
 | 	{0x3717, 0x01}, | 
 | 	{0x3731, 0x02}, | 
 | 	{0x370b, 0x60}, | 
 | 	{0x3705, 0x1a}, | 
 | 	{0x3f05, 0x02}, | 
 | 	{0x3f06, 0x10}, | 
 | 	{0x3f01, 0x0a}, | 
 | 	{0x3a08, 0x01}, | 
 | 	{0x3a09, 0x27}, | 
 | 	{0x3a0a, 0x00}, | 
 | 	{0x3a0b, 0xf6}, | 
 | 	{0x3a0d, 0x04}, | 
 | 	{0x3a0e, 0x03}, | 
 | 	{0x3a0f, 0x58}, | 
 | 	{0x3a10, 0x50}, | 
 | 	{0x3a1b, 0x58}, | 
 | 	{0x3a1e, 0x50}, | 
 | 	{0x3a11, 0x60}, | 
 | 	{0x3a1f, 0x28}, | 
 | 	{0x4001, 0x02}, | 
 | 	{0x4004, 0x02}, | 
 | 	{0x4000, 0x09}, | 
 | 	{0x4837, 0x24}, | 
 | 	{0x4050, 0x6e}, | 
 | 	{0x4051, 0x8f}, | 
 | 	{0x0100, 0x01}, | 
 | }; | 
 |  | 
 | static int ov5647_write(struct v4l2_subdev *sd, u16 reg, u8 val) | 
 | { | 
 | 	int ret; | 
 | 	unsigned char data[3] = { reg >> 8, reg & 0xff, val}; | 
 | 	struct i2c_client *client = v4l2_get_subdevdata(sd); | 
 |  | 
 | 	ret = i2c_master_send(client, data, 3); | 
 | 	if (ret < 0) | 
 | 		dev_dbg(&client->dev, "%s: i2c write error, reg: %x\n", | 
 | 				__func__, reg); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int ov5647_read(struct v4l2_subdev *sd, u16 reg, u8 *val) | 
 | { | 
 | 	int ret; | 
 | 	unsigned char data_w[2] = { reg >> 8, reg & 0xff }; | 
 | 	struct i2c_client *client = v4l2_get_subdevdata(sd); | 
 |  | 
 | 	ret = i2c_master_send(client, data_w, 2); | 
 | 	if (ret < 0) { | 
 | 		dev_dbg(&client->dev, "%s: i2c write error, reg: %x\n", | 
 | 			__func__, reg); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	ret = i2c_master_recv(client, val, 1); | 
 | 	if (ret < 0) | 
 | 		dev_dbg(&client->dev, "%s: i2c read error, reg: %x\n", | 
 | 				__func__, reg); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int ov5647_write_array(struct v4l2_subdev *sd, | 
 | 				struct regval_list *regs, int array_size) | 
 | { | 
 | 	int i, ret; | 
 |  | 
 | 	for (i = 0; i < array_size; i++) { | 
 | 		ret = ov5647_write(sd, regs[i].addr, regs[i].data); | 
 | 		if (ret < 0) | 
 | 			return ret; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int ov5647_set_virtual_channel(struct v4l2_subdev *sd, int channel) | 
 | { | 
 | 	u8 channel_id; | 
 | 	int ret; | 
 |  | 
 | 	ret = ov5647_read(sd, OV5647_REG_MIPI_CTRL14, &channel_id); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	channel_id &= ~(3 << 6); | 
 | 	return ov5647_write(sd, OV5647_REG_MIPI_CTRL14, channel_id | (channel << 6)); | 
 | } | 
 |  | 
 | static int ov5647_stream_on(struct v4l2_subdev *sd) | 
 | { | 
 | 	int ret; | 
 |  | 
 | 	ret = ov5647_write(sd, OV5647_REG_MIPI_CTRL00, MIPI_CTRL00_BUS_IDLE); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	ret = ov5647_write(sd, OV5647_REG_FRAME_OFF_NUMBER, 0x00); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	return ov5647_write(sd, OV5640_REG_PAD_OUT, 0x00); | 
 | } | 
 |  | 
 | static int ov5647_stream_off(struct v4l2_subdev *sd) | 
 | { | 
 | 	int ret; | 
 |  | 
 | 	ret = ov5647_write(sd, OV5647_REG_MIPI_CTRL00, MIPI_CTRL00_CLOCK_LANE_GATE | 
 | 			   | MIPI_CTRL00_BUS_IDLE | MIPI_CTRL00_CLOCK_LANE_DISABLE); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	ret = ov5647_write(sd, OV5647_REG_FRAME_OFF_NUMBER, 0x0f); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	return ov5647_write(sd, OV5640_REG_PAD_OUT, 0x01); | 
 | } | 
 |  | 
 | static int set_sw_standby(struct v4l2_subdev *sd, bool standby) | 
 | { | 
 | 	int ret; | 
 | 	u8 rdval; | 
 |  | 
 | 	ret = ov5647_read(sd, OV5647_SW_STANDBY, &rdval); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	if (standby) | 
 | 		rdval &= ~0x01; | 
 | 	else | 
 | 		rdval |= 0x01; | 
 |  | 
 | 	return ov5647_write(sd, OV5647_SW_STANDBY, rdval); | 
 | } | 
 |  | 
 | static int __sensor_init(struct v4l2_subdev *sd) | 
 | { | 
 | 	int ret; | 
 | 	u8 resetval, rdval; | 
 | 	struct i2c_client *client = v4l2_get_subdevdata(sd); | 
 |  | 
 | 	ret = ov5647_read(sd, OV5647_SW_STANDBY, &rdval); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	ret = ov5647_write_array(sd, ov5647_640x480, | 
 | 					ARRAY_SIZE(ov5647_640x480)); | 
 | 	if (ret < 0) { | 
 | 		dev_err(&client->dev, "write sensor default regs error\n"); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	ret = ov5647_set_virtual_channel(sd, 0); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	ret = ov5647_read(sd, OV5647_SW_STANDBY, &resetval); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	if (!(resetval & 0x01)) { | 
 | 		dev_err(&client->dev, "Device was in SW standby"); | 
 | 		ret = ov5647_write(sd, OV5647_SW_STANDBY, 0x01); | 
 | 		if (ret < 0) | 
 | 			return ret; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * stream off to make the clock lane into LP-11 state. | 
 | 	 */ | 
 | 	return ov5647_stream_off(sd); | 
 | } | 
 |  | 
 | static int ov5647_sensor_power(struct v4l2_subdev *sd, int on) | 
 | { | 
 | 	int ret = 0; | 
 | 	struct ov5647 *ov5647 = to_state(sd); | 
 | 	struct i2c_client *client = v4l2_get_subdevdata(sd); | 
 |  | 
 | 	mutex_lock(&ov5647->lock); | 
 |  | 
 | 	if (on && !ov5647->power_count)	{ | 
 | 		dev_dbg(&client->dev, "OV5647 power on\n"); | 
 |  | 
 | 		ret = clk_prepare_enable(ov5647->xclk); | 
 | 		if (ret < 0) { | 
 | 			dev_err(&client->dev, "clk prepare enable failed\n"); | 
 | 			goto out; | 
 | 		} | 
 |  | 
 | 		ret = ov5647_write_array(sd, sensor_oe_enable_regs, | 
 | 				ARRAY_SIZE(sensor_oe_enable_regs)); | 
 | 		if (ret < 0) { | 
 | 			clk_disable_unprepare(ov5647->xclk); | 
 | 			dev_err(&client->dev, | 
 | 				"write sensor_oe_enable_regs error\n"); | 
 | 			goto out; | 
 | 		} | 
 |  | 
 | 		ret = __sensor_init(sd); | 
 | 		if (ret < 0) { | 
 | 			clk_disable_unprepare(ov5647->xclk); | 
 | 			dev_err(&client->dev, | 
 | 				"Camera not available, check Power\n"); | 
 | 			goto out; | 
 | 		} | 
 | 	} else if (!on && ov5647->power_count == 1) { | 
 | 		dev_dbg(&client->dev, "OV5647 power off\n"); | 
 |  | 
 | 		ret = ov5647_write_array(sd, sensor_oe_disable_regs, | 
 | 				ARRAY_SIZE(sensor_oe_disable_regs)); | 
 |  | 
 | 		if (ret < 0) | 
 | 			dev_dbg(&client->dev, "disable oe failed\n"); | 
 |  | 
 | 		ret = set_sw_standby(sd, true); | 
 |  | 
 | 		if (ret < 0) | 
 | 			dev_dbg(&client->dev, "soft stby failed\n"); | 
 |  | 
 | 		clk_disable_unprepare(ov5647->xclk); | 
 | 	} | 
 |  | 
 | 	/* Update the power count. */ | 
 | 	ov5647->power_count += on ? 1 : -1; | 
 | 	WARN_ON(ov5647->power_count < 0); | 
 |  | 
 | out: | 
 | 	mutex_unlock(&ov5647->lock); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | #ifdef CONFIG_VIDEO_ADV_DEBUG | 
 | static int ov5647_sensor_get_register(struct v4l2_subdev *sd, | 
 | 				struct v4l2_dbg_register *reg) | 
 | { | 
 | 	u8 val; | 
 | 	int ret; | 
 |  | 
 | 	ret = ov5647_read(sd, reg->reg & 0xff, &val); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	reg->val = val; | 
 | 	reg->size = 1; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int ov5647_sensor_set_register(struct v4l2_subdev *sd, | 
 | 				const struct v4l2_dbg_register *reg) | 
 | { | 
 | 	return ov5647_write(sd, reg->reg & 0xff, reg->val & 0xff); | 
 | } | 
 | #endif | 
 |  | 
 | /* | 
 |  * Subdev core operations registration | 
 |  */ | 
 | static const struct v4l2_subdev_core_ops ov5647_subdev_core_ops = { | 
 | 	.s_power		= ov5647_sensor_power, | 
 | #ifdef CONFIG_VIDEO_ADV_DEBUG | 
 | 	.g_register		= ov5647_sensor_get_register, | 
 | 	.s_register		= ov5647_sensor_set_register, | 
 | #endif | 
 | }; | 
 |  | 
 | static int ov5647_s_stream(struct v4l2_subdev *sd, int enable) | 
 | { | 
 | 	if (enable) | 
 | 		return ov5647_stream_on(sd); | 
 | 	else | 
 | 		return ov5647_stream_off(sd); | 
 | } | 
 |  | 
 | static const struct v4l2_subdev_video_ops ov5647_subdev_video_ops = { | 
 | 	.s_stream =		ov5647_s_stream, | 
 | }; | 
 |  | 
 | static int ov5647_enum_mbus_code(struct v4l2_subdev *sd, | 
 | 				struct v4l2_subdev_pad_config *cfg, | 
 | 				struct v4l2_subdev_mbus_code_enum *code) | 
 | { | 
 | 	if (code->index > 0) | 
 | 		return -EINVAL; | 
 |  | 
 | 	code->code = MEDIA_BUS_FMT_SBGGR8_1X8; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct v4l2_subdev_pad_ops ov5647_subdev_pad_ops = { | 
 | 	.enum_mbus_code = ov5647_enum_mbus_code, | 
 | }; | 
 |  | 
 | static const struct v4l2_subdev_ops ov5647_subdev_ops = { | 
 | 	.core		= &ov5647_subdev_core_ops, | 
 | 	.video		= &ov5647_subdev_video_ops, | 
 | 	.pad		= &ov5647_subdev_pad_ops, | 
 | }; | 
 |  | 
 | static int ov5647_detect(struct v4l2_subdev *sd) | 
 | { | 
 | 	u8 read; | 
 | 	int ret; | 
 | 	struct i2c_client *client = v4l2_get_subdevdata(sd); | 
 |  | 
 | 	ret = ov5647_write(sd, OV5647_SW_RESET, 0x01); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	ret = ov5647_read(sd, OV5647_REG_CHIPID_H, &read); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	if (read != 0x56) { | 
 | 		dev_err(&client->dev, "ID High expected 0x56 got %x", read); | 
 | 		return -ENODEV; | 
 | 	} | 
 |  | 
 | 	ret = ov5647_read(sd, OV5647_REG_CHIPID_L, &read); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	if (read != 0x47) { | 
 | 		dev_err(&client->dev, "ID Low expected 0x47 got %x", read); | 
 | 		return -ENODEV; | 
 | 	} | 
 |  | 
 | 	return ov5647_write(sd, OV5647_SW_RESET, 0x00); | 
 | } | 
 |  | 
 | static int ov5647_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) | 
 | { | 
 | 	struct v4l2_mbus_framefmt *format = | 
 | 				v4l2_subdev_get_try_format(sd, fh->pad, 0); | 
 | 	struct v4l2_rect *crop = | 
 | 				v4l2_subdev_get_try_crop(sd, fh->pad, 0); | 
 |  | 
 | 	crop->left = OV5647_COLUMN_START_DEF; | 
 | 	crop->top = OV5647_ROW_START_DEF; | 
 | 	crop->width = OV5647_WINDOW_WIDTH_DEF; | 
 | 	crop->height = OV5647_WINDOW_HEIGHT_DEF; | 
 |  | 
 | 	format->code = MEDIA_BUS_FMT_SBGGR8_1X8; | 
 |  | 
 | 	format->width = OV5647_WINDOW_WIDTH_DEF; | 
 | 	format->height = OV5647_WINDOW_HEIGHT_DEF; | 
 | 	format->field = V4L2_FIELD_NONE; | 
 | 	format->colorspace = V4L2_COLORSPACE_SRGB; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct v4l2_subdev_internal_ops ov5647_subdev_internal_ops = { | 
 | 	.open = ov5647_open, | 
 | }; | 
 |  | 
 | static int ov5647_parse_dt(struct device_node *np) | 
 | { | 
 | 	struct v4l2_fwnode_endpoint bus_cfg = { .bus_type = 0 }; | 
 | 	struct device_node *ep; | 
 |  | 
 | 	int ret; | 
 |  | 
 | 	ep = of_graph_get_next_endpoint(np, NULL); | 
 | 	if (!ep) | 
 | 		return -EINVAL; | 
 |  | 
 | 	ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(ep), &bus_cfg); | 
 |  | 
 | 	of_node_put(ep); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int ov5647_probe(struct i2c_client *client, | 
 | 			const struct i2c_device_id *id) | 
 | { | 
 | 	struct device *dev = &client->dev; | 
 | 	struct ov5647 *sensor; | 
 | 	int ret; | 
 | 	struct v4l2_subdev *sd; | 
 | 	struct device_node *np = client->dev.of_node; | 
 | 	u32 xclk_freq; | 
 |  | 
 | 	sensor = devm_kzalloc(dev, sizeof(*sensor), GFP_KERNEL); | 
 | 	if (!sensor) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	if (IS_ENABLED(CONFIG_OF) && np) { | 
 | 		ret = ov5647_parse_dt(np); | 
 | 		if (ret) { | 
 | 			dev_err(dev, "DT parsing error: %d\n", ret); | 
 | 			return ret; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* get system clock (xclk) */ | 
 | 	sensor->xclk = devm_clk_get(dev, NULL); | 
 | 	if (IS_ERR(sensor->xclk)) { | 
 | 		dev_err(dev, "could not get xclk"); | 
 | 		return PTR_ERR(sensor->xclk); | 
 | 	} | 
 |  | 
 | 	xclk_freq = clk_get_rate(sensor->xclk); | 
 | 	if (xclk_freq != 25000000) { | 
 | 		dev_err(dev, "Unsupported clock frequency: %u\n", xclk_freq); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	mutex_init(&sensor->lock); | 
 |  | 
 | 	sd = &sensor->sd; | 
 | 	v4l2_i2c_subdev_init(sd, client, &ov5647_subdev_ops); | 
 | 	sensor->sd.internal_ops = &ov5647_subdev_internal_ops; | 
 | 	sensor->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; | 
 |  | 
 | 	sensor->pad.flags = MEDIA_PAD_FL_SOURCE; | 
 | 	sd->entity.function = MEDIA_ENT_F_CAM_SENSOR; | 
 | 	ret = media_entity_pads_init(&sd->entity, 1, &sensor->pad); | 
 | 	if (ret < 0) | 
 | 		goto mutex_remove; | 
 |  | 
 | 	ret = ov5647_detect(sd); | 
 | 	if (ret < 0) | 
 | 		goto error; | 
 |  | 
 | 	ret = v4l2_async_register_subdev(sd); | 
 | 	if (ret < 0) | 
 | 		goto error; | 
 |  | 
 | 	dev_dbg(dev, "OmniVision OV5647 camera driver probed\n"); | 
 | 	return 0; | 
 | error: | 
 | 	media_entity_cleanup(&sd->entity); | 
 | mutex_remove: | 
 | 	mutex_destroy(&sensor->lock); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int ov5647_remove(struct i2c_client *client) | 
 | { | 
 | 	struct v4l2_subdev *sd = i2c_get_clientdata(client); | 
 | 	struct ov5647 *ov5647 = to_state(sd); | 
 |  | 
 | 	v4l2_async_unregister_subdev(&ov5647->sd); | 
 | 	media_entity_cleanup(&ov5647->sd.entity); | 
 | 	v4l2_device_unregister_subdev(sd); | 
 | 	mutex_destroy(&ov5647->lock); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct i2c_device_id ov5647_id[] = { | 
 | 	{ "ov5647", 0 }, | 
 | 	{ } | 
 | }; | 
 | MODULE_DEVICE_TABLE(i2c, ov5647_id); | 
 |  | 
 | #if IS_ENABLED(CONFIG_OF) | 
 | static const struct of_device_id ov5647_of_match[] = { | 
 | 	{ .compatible = "ovti,ov5647" }, | 
 | 	{ /* sentinel */ }, | 
 | }; | 
 | MODULE_DEVICE_TABLE(of, ov5647_of_match); | 
 | #endif | 
 |  | 
 | static struct i2c_driver ov5647_driver = { | 
 | 	.driver = { | 
 | 		.of_match_table = of_match_ptr(ov5647_of_match), | 
 | 		.name	= SENSOR_NAME, | 
 | 	}, | 
 | 	.probe		= ov5647_probe, | 
 | 	.remove		= ov5647_remove, | 
 | 	.id_table	= ov5647_id, | 
 | }; | 
 |  | 
 | module_i2c_driver(ov5647_driver); | 
 |  | 
 | MODULE_AUTHOR("Ramiro Oliveira <roliveir@synopsys.com>"); | 
 | MODULE_DESCRIPTION("A low-level driver for OmniVision ov5647 sensors"); | 
 | MODULE_LICENSE("GPL v2"); |