|  | /* | 
|  | * Imagination Technologies Pulse Width Modulator driver | 
|  | * | 
|  | * Copyright (c) 2014-2015, Imagination Technologies | 
|  | * | 
|  | * Based on drivers/pwm/pwm-tegra.c, Copyright (c) 2010, NVIDIA Corporation | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License as published by | 
|  | * the Free Software Foundation; either version 2 of the License. | 
|  | */ | 
|  |  | 
|  | #include <linux/clk.h> | 
|  | #include <linux/err.h> | 
|  | #include <linux/io.h> | 
|  | #include <linux/mfd/syscon.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/of.h> | 
|  | #include <linux/of_device.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/pm_runtime.h> | 
|  | #include <linux/pwm.h> | 
|  | #include <linux/regmap.h> | 
|  | #include <linux/slab.h> | 
|  |  | 
|  | /* PWM registers */ | 
|  | #define PWM_CTRL_CFG				0x0000 | 
|  | #define PWM_CTRL_CFG_NO_SUB_DIV			0 | 
|  | #define PWM_CTRL_CFG_SUB_DIV0			1 | 
|  | #define PWM_CTRL_CFG_SUB_DIV1			2 | 
|  | #define PWM_CTRL_CFG_SUB_DIV0_DIV1		3 | 
|  | #define PWM_CTRL_CFG_DIV_SHIFT(ch)		((ch) * 2 + 4) | 
|  | #define PWM_CTRL_CFG_DIV_MASK			0x3 | 
|  |  | 
|  | #define PWM_CH_CFG(ch)				(0x4 + (ch) * 4) | 
|  | #define PWM_CH_CFG_TMBASE_SHIFT			0 | 
|  | #define PWM_CH_CFG_DUTY_SHIFT			16 | 
|  |  | 
|  | #define PERIP_PWM_PDM_CONTROL			0x0140 | 
|  | #define PERIP_PWM_PDM_CONTROL_CH_MASK		0x1 | 
|  | #define PERIP_PWM_PDM_CONTROL_CH_SHIFT(ch)	((ch) * 4) | 
|  |  | 
|  | #define IMG_PWM_PM_TIMEOUT			1000 /* ms */ | 
|  |  | 
|  | /* | 
|  | * PWM period is specified with a timebase register, | 
|  | * in number of step periods. The PWM duty cycle is also | 
|  | * specified in step periods, in the [0, $timebase] range. | 
|  | * In other words, the timebase imposes the duty cycle | 
|  | * resolution. Therefore, let's constraint the timebase to | 
|  | * a minimum value to allow a sane range of duty cycle values. | 
|  | * Imposing a minimum timebase, will impose a maximum PWM frequency. | 
|  | * | 
|  | * The value chosen is completely arbitrary. | 
|  | */ | 
|  | #define MIN_TMBASE_STEPS			16 | 
|  |  | 
|  | #define IMG_PWM_NPWM				4 | 
|  |  | 
|  | struct img_pwm_soc_data { | 
|  | u32 max_timebase; | 
|  | }; | 
|  |  | 
|  | struct img_pwm_chip { | 
|  | struct device	*dev; | 
|  | struct pwm_chip	chip; | 
|  | struct clk	*pwm_clk; | 
|  | struct clk	*sys_clk; | 
|  | void __iomem	*base; | 
|  | struct regmap	*periph_regs; | 
|  | int		max_period_ns; | 
|  | int		min_period_ns; | 
|  | const struct img_pwm_soc_data   *data; | 
|  | u32		suspend_ctrl_cfg; | 
|  | u32		suspend_ch_cfg[IMG_PWM_NPWM]; | 
|  | }; | 
|  |  | 
|  | static inline struct img_pwm_chip *to_img_pwm_chip(struct pwm_chip *chip) | 
|  | { | 
|  | return container_of(chip, struct img_pwm_chip, chip); | 
|  | } | 
|  |  | 
|  | static inline void img_pwm_writel(struct img_pwm_chip *chip, | 
|  | u32 reg, u32 val) | 
|  | { | 
|  | writel(val, chip->base + reg); | 
|  | } | 
|  |  | 
|  | static inline u32 img_pwm_readl(struct img_pwm_chip *chip, | 
|  | u32 reg) | 
|  | { | 
|  | return readl(chip->base + reg); | 
|  | } | 
|  |  | 
|  | static int img_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, | 
|  | int duty_ns, int period_ns) | 
|  | { | 
|  | u32 val, div, duty, timebase; | 
|  | unsigned long mul, output_clk_hz, input_clk_hz; | 
|  | struct img_pwm_chip *pwm_chip = to_img_pwm_chip(chip); | 
|  | unsigned int max_timebase = pwm_chip->data->max_timebase; | 
|  | int ret; | 
|  |  | 
|  | if (period_ns < pwm_chip->min_period_ns || | 
|  | period_ns > pwm_chip->max_period_ns) { | 
|  | dev_err(chip->dev, "configured period not in range\n"); | 
|  | return -ERANGE; | 
|  | } | 
|  |  | 
|  | input_clk_hz = clk_get_rate(pwm_chip->pwm_clk); | 
|  | output_clk_hz = DIV_ROUND_UP(NSEC_PER_SEC, period_ns); | 
|  |  | 
|  | mul = DIV_ROUND_UP(input_clk_hz, output_clk_hz); | 
|  | if (mul <= max_timebase) { | 
|  | div = PWM_CTRL_CFG_NO_SUB_DIV; | 
|  | timebase = DIV_ROUND_UP(mul, 1); | 
|  | } else if (mul <= max_timebase * 8) { | 
|  | div = PWM_CTRL_CFG_SUB_DIV0; | 
|  | timebase = DIV_ROUND_UP(mul, 8); | 
|  | } else if (mul <= max_timebase * 64) { | 
|  | div = PWM_CTRL_CFG_SUB_DIV1; | 
|  | timebase = DIV_ROUND_UP(mul, 64); | 
|  | } else if (mul <= max_timebase * 512) { | 
|  | div = PWM_CTRL_CFG_SUB_DIV0_DIV1; | 
|  | timebase = DIV_ROUND_UP(mul, 512); | 
|  | } else { | 
|  | dev_err(chip->dev, | 
|  | "failed to configure timebase steps/divider value\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | duty = DIV_ROUND_UP(timebase * duty_ns, period_ns); | 
|  |  | 
|  | ret = pm_runtime_get_sync(chip->dev); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | val = img_pwm_readl(pwm_chip, PWM_CTRL_CFG); | 
|  | val &= ~(PWM_CTRL_CFG_DIV_MASK << PWM_CTRL_CFG_DIV_SHIFT(pwm->hwpwm)); | 
|  | val |= (div & PWM_CTRL_CFG_DIV_MASK) << | 
|  | PWM_CTRL_CFG_DIV_SHIFT(pwm->hwpwm); | 
|  | img_pwm_writel(pwm_chip, PWM_CTRL_CFG, val); | 
|  |  | 
|  | val = (duty << PWM_CH_CFG_DUTY_SHIFT) | | 
|  | (timebase << PWM_CH_CFG_TMBASE_SHIFT); | 
|  | img_pwm_writel(pwm_chip, PWM_CH_CFG(pwm->hwpwm), val); | 
|  |  | 
|  | pm_runtime_mark_last_busy(chip->dev); | 
|  | pm_runtime_put_autosuspend(chip->dev); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int img_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) | 
|  | { | 
|  | u32 val; | 
|  | struct img_pwm_chip *pwm_chip = to_img_pwm_chip(chip); | 
|  | int ret; | 
|  |  | 
|  | ret = pm_runtime_get_sync(chip->dev); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | val = img_pwm_readl(pwm_chip, PWM_CTRL_CFG); | 
|  | val |= BIT(pwm->hwpwm); | 
|  | img_pwm_writel(pwm_chip, PWM_CTRL_CFG, val); | 
|  |  | 
|  | regmap_update_bits(pwm_chip->periph_regs, PERIP_PWM_PDM_CONTROL, | 
|  | PERIP_PWM_PDM_CONTROL_CH_MASK << | 
|  | PERIP_PWM_PDM_CONTROL_CH_SHIFT(pwm->hwpwm), 0); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void img_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) | 
|  | { | 
|  | u32 val; | 
|  | struct img_pwm_chip *pwm_chip = to_img_pwm_chip(chip); | 
|  |  | 
|  | val = img_pwm_readl(pwm_chip, PWM_CTRL_CFG); | 
|  | val &= ~BIT(pwm->hwpwm); | 
|  | img_pwm_writel(pwm_chip, PWM_CTRL_CFG, val); | 
|  |  | 
|  | pm_runtime_mark_last_busy(chip->dev); | 
|  | pm_runtime_put_autosuspend(chip->dev); | 
|  | } | 
|  |  | 
|  | static const struct pwm_ops img_pwm_ops = { | 
|  | .config = img_pwm_config, | 
|  | .enable = img_pwm_enable, | 
|  | .disable = img_pwm_disable, | 
|  | .owner = THIS_MODULE, | 
|  | }; | 
|  |  | 
|  | static const struct img_pwm_soc_data pistachio_pwm = { | 
|  | .max_timebase = 255, | 
|  | }; | 
|  |  | 
|  | static const struct of_device_id img_pwm_of_match[] = { | 
|  | { | 
|  | .compatible = "img,pistachio-pwm", | 
|  | .data = &pistachio_pwm, | 
|  | }, | 
|  | { } | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(of, img_pwm_of_match); | 
|  |  | 
|  | static int img_pwm_runtime_suspend(struct device *dev) | 
|  | { | 
|  | struct img_pwm_chip *pwm_chip = dev_get_drvdata(dev); | 
|  |  | 
|  | clk_disable_unprepare(pwm_chip->pwm_clk); | 
|  | clk_disable_unprepare(pwm_chip->sys_clk); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int img_pwm_runtime_resume(struct device *dev) | 
|  | { | 
|  | struct img_pwm_chip *pwm_chip = dev_get_drvdata(dev); | 
|  | int ret; | 
|  |  | 
|  | ret = clk_prepare_enable(pwm_chip->sys_clk); | 
|  | if (ret < 0) { | 
|  | dev_err(dev, "could not prepare or enable sys clock\n"); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | ret = clk_prepare_enable(pwm_chip->pwm_clk); | 
|  | if (ret < 0) { | 
|  | dev_err(dev, "could not prepare or enable pwm clock\n"); | 
|  | clk_disable_unprepare(pwm_chip->sys_clk); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int img_pwm_probe(struct platform_device *pdev) | 
|  | { | 
|  | int ret; | 
|  | u64 val; | 
|  | unsigned long clk_rate; | 
|  | struct resource *res; | 
|  | struct img_pwm_chip *pwm; | 
|  | const struct of_device_id *of_dev_id; | 
|  |  | 
|  | pwm = devm_kzalloc(&pdev->dev, sizeof(*pwm), GFP_KERNEL); | 
|  | if (!pwm) | 
|  | return -ENOMEM; | 
|  |  | 
|  | pwm->dev = &pdev->dev; | 
|  |  | 
|  | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
|  | pwm->base = devm_ioremap_resource(&pdev->dev, res); | 
|  | if (IS_ERR(pwm->base)) | 
|  | return PTR_ERR(pwm->base); | 
|  |  | 
|  | of_dev_id = of_match_device(img_pwm_of_match, &pdev->dev); | 
|  | if (!of_dev_id) | 
|  | return -ENODEV; | 
|  | pwm->data = of_dev_id->data; | 
|  |  | 
|  | pwm->periph_regs = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, | 
|  | "img,cr-periph"); | 
|  | if (IS_ERR(pwm->periph_regs)) | 
|  | return PTR_ERR(pwm->periph_regs); | 
|  |  | 
|  | pwm->sys_clk = devm_clk_get(&pdev->dev, "sys"); | 
|  | if (IS_ERR(pwm->sys_clk)) { | 
|  | dev_err(&pdev->dev, "failed to get system clock\n"); | 
|  | return PTR_ERR(pwm->sys_clk); | 
|  | } | 
|  |  | 
|  | pwm->pwm_clk = devm_clk_get(&pdev->dev, "pwm"); | 
|  | if (IS_ERR(pwm->pwm_clk)) { | 
|  | dev_err(&pdev->dev, "failed to get pwm clock\n"); | 
|  | return PTR_ERR(pwm->pwm_clk); | 
|  | } | 
|  |  | 
|  | pm_runtime_set_autosuspend_delay(&pdev->dev, IMG_PWM_PM_TIMEOUT); | 
|  | pm_runtime_use_autosuspend(&pdev->dev); | 
|  | pm_runtime_enable(&pdev->dev); | 
|  | if (!pm_runtime_enabled(&pdev->dev)) { | 
|  | ret = img_pwm_runtime_resume(&pdev->dev); | 
|  | if (ret) | 
|  | goto err_pm_disable; | 
|  | } | 
|  |  | 
|  | clk_rate = clk_get_rate(pwm->pwm_clk); | 
|  | if (!clk_rate) { | 
|  | dev_err(&pdev->dev, "pwm clock has no frequency\n"); | 
|  | ret = -EINVAL; | 
|  | goto err_suspend; | 
|  | } | 
|  |  | 
|  | /* The maximum input clock divider is 512 */ | 
|  | val = (u64)NSEC_PER_SEC * 512 * pwm->data->max_timebase; | 
|  | do_div(val, clk_rate); | 
|  | pwm->max_period_ns = val; | 
|  |  | 
|  | val = (u64)NSEC_PER_SEC * MIN_TMBASE_STEPS; | 
|  | do_div(val, clk_rate); | 
|  | pwm->min_period_ns = val; | 
|  |  | 
|  | pwm->chip.dev = &pdev->dev; | 
|  | pwm->chip.ops = &img_pwm_ops; | 
|  | pwm->chip.base = -1; | 
|  | pwm->chip.npwm = IMG_PWM_NPWM; | 
|  |  | 
|  | ret = pwmchip_add(&pwm->chip); | 
|  | if (ret < 0) { | 
|  | dev_err(&pdev->dev, "pwmchip_add failed: %d\n", ret); | 
|  | goto err_suspend; | 
|  | } | 
|  |  | 
|  | platform_set_drvdata(pdev, pwm); | 
|  | return 0; | 
|  |  | 
|  | err_suspend: | 
|  | if (!pm_runtime_enabled(&pdev->dev)) | 
|  | img_pwm_runtime_suspend(&pdev->dev); | 
|  | err_pm_disable: | 
|  | pm_runtime_disable(&pdev->dev); | 
|  | pm_runtime_dont_use_autosuspend(&pdev->dev); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int img_pwm_remove(struct platform_device *pdev) | 
|  | { | 
|  | struct img_pwm_chip *pwm_chip = platform_get_drvdata(pdev); | 
|  | u32 val; | 
|  | unsigned int i; | 
|  | int ret; | 
|  |  | 
|  | ret = pm_runtime_get_sync(&pdev->dev); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | for (i = 0; i < pwm_chip->chip.npwm; i++) { | 
|  | val = img_pwm_readl(pwm_chip, PWM_CTRL_CFG); | 
|  | val &= ~BIT(i); | 
|  | img_pwm_writel(pwm_chip, PWM_CTRL_CFG, val); | 
|  | } | 
|  |  | 
|  | pm_runtime_put(&pdev->dev); | 
|  | pm_runtime_disable(&pdev->dev); | 
|  | if (!pm_runtime_status_suspended(&pdev->dev)) | 
|  | img_pwm_runtime_suspend(&pdev->dev); | 
|  |  | 
|  | return pwmchip_remove(&pwm_chip->chip); | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PM_SLEEP | 
|  | static int img_pwm_suspend(struct device *dev) | 
|  | { | 
|  | struct img_pwm_chip *pwm_chip = dev_get_drvdata(dev); | 
|  | int i, ret; | 
|  |  | 
|  | if (pm_runtime_status_suspended(dev)) { | 
|  | ret = img_pwm_runtime_resume(dev); | 
|  | if (ret) | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < pwm_chip->chip.npwm; i++) | 
|  | pwm_chip->suspend_ch_cfg[i] = img_pwm_readl(pwm_chip, | 
|  | PWM_CH_CFG(i)); | 
|  |  | 
|  | pwm_chip->suspend_ctrl_cfg = img_pwm_readl(pwm_chip, PWM_CTRL_CFG); | 
|  |  | 
|  | img_pwm_runtime_suspend(dev); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int img_pwm_resume(struct device *dev) | 
|  | { | 
|  | struct img_pwm_chip *pwm_chip = dev_get_drvdata(dev); | 
|  | int ret; | 
|  | int i; | 
|  |  | 
|  | ret = img_pwm_runtime_resume(dev); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | for (i = 0; i < pwm_chip->chip.npwm; i++) | 
|  | img_pwm_writel(pwm_chip, PWM_CH_CFG(i), | 
|  | pwm_chip->suspend_ch_cfg[i]); | 
|  |  | 
|  | img_pwm_writel(pwm_chip, PWM_CTRL_CFG, pwm_chip->suspend_ctrl_cfg); | 
|  |  | 
|  | for (i = 0; i < pwm_chip->chip.npwm; i++) | 
|  | if (pwm_chip->suspend_ctrl_cfg & BIT(i)) | 
|  | regmap_update_bits(pwm_chip->periph_regs, | 
|  | PERIP_PWM_PDM_CONTROL, | 
|  | PERIP_PWM_PDM_CONTROL_CH_MASK << | 
|  | PERIP_PWM_PDM_CONTROL_CH_SHIFT(i), | 
|  | 0); | 
|  |  | 
|  | if (pm_runtime_status_suspended(dev)) | 
|  | img_pwm_runtime_suspend(dev); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | #endif /* CONFIG_PM */ | 
|  |  | 
|  | static const struct dev_pm_ops img_pwm_pm_ops = { | 
|  | SET_RUNTIME_PM_OPS(img_pwm_runtime_suspend, | 
|  | img_pwm_runtime_resume, | 
|  | NULL) | 
|  | SET_SYSTEM_SLEEP_PM_OPS(img_pwm_suspend, img_pwm_resume) | 
|  | }; | 
|  |  | 
|  | static struct platform_driver img_pwm_driver = { | 
|  | .driver = { | 
|  | .name = "img-pwm", | 
|  | .pm = &img_pwm_pm_ops, | 
|  | .of_match_table = img_pwm_of_match, | 
|  | }, | 
|  | .probe = img_pwm_probe, | 
|  | .remove = img_pwm_remove, | 
|  | }; | 
|  | module_platform_driver(img_pwm_driver); | 
|  |  | 
|  | MODULE_AUTHOR("Sai Masarapu <Sai.Masarapu@imgtec.com>"); | 
|  | MODULE_DESCRIPTION("Imagination Technologies PWM DAC driver"); | 
|  | MODULE_LICENSE("GPL v2"); |