| # |
| # This file is used for selecting non-standard netcard options, and |
| # need not be modified for typical use. |
| # |
| # Drivers are *not* selected in this file, but rather with files |
| # automatically generated during the top-level kernel configuration. |
| # |
| # Special options supported, indexed by their 'config' name: |
| # |
| # CONFIG_WD80x3 The Western Digital (SMC) WD80x3 driver |
| # WD_SHMEM=xxx Forces the address of the shared memory |
| # WD_no_mapout Don't map out the shared memory (faster, but |
| # your machine may not warm-boot). |
| # CONFIG_NE2000 The NE-[12]000 clone driver. |
| # PACKETBUF_MEMSIZE Allows an extra-large packet buffer to be |
| # used. Usually pointless under Linux. |
| # show_all_SAPROM Show the entire address PROM, not just the |
| # ethernet address, during boot. |
| # rw_bugfix Patch an obscure bug with a version of the 8390. |
| # CONFIG_HPLAN The HP-LAN driver (for 8390-based boards only). |
| # rw_bugfix Fix the same obscure bug. |
| # CONFIG_EL2 The 3c503 EtherLink II driver |
| # EL2_AUI Default to the AUI port instead of the BNC port |
| # no_probe_nonshared_memory Don't probe for programmed-I/O boards. |
| # EL2MEMTEST Test shared memory at boot-time. |
| # CONFIG_PLIP The Crynwr-protocol PL/IP driver |
| # INITIALTIMEOUTFACTOR Timing parameters. |
| # MAXTIMEOUTFACTOR |
| # D_LINK The D-Link DE-600 Portable Ethernet Adaptor. |
| # D_LINK_IO The D-Link I/O address (0x378 == typical) |
| # D_LINK_IRQ The D-Link IRQ number to use (IRQ7 == typical) |
| # D_LINK_DEBUG Enable or disable D-Link debugging |
| # |
| |
| # The following options exist, but cannot be set in this file. |
| # lance.c |
| # LANCE_DMA Change the default DMA to other than DMA5. |
| # 8390.c |
| # NO_PINGPONG Disable ping-pong transmit buffers. |
| |
| |
| # Most drivers also have a *_DEBUG setting that may be adjusted. |
| # The 8390 drivers share the EI_DEBUG settting. |
| |
| # General options for Space.c |
| OPTS = # -DETH0_ADDR=0x300 -DETH0_IRQ=11 |
| |
| WD_OPTS = #-DWD_SHMEM=0xDD000 |
| EL2_OPTS = #-DEL2_AUI |
| NE_OPTS = |
| HP_OPTS = |
| PLIP_OPTS = |
| |
| # The following are the only parameters that must be set in this file. |
| DL_OPTS = -DD_LINK_IO=0x378 -DD_LINK_IRQ=7 -UD_LINK_DEBUG |