| /* |
| * INET An implementation of the TCP/IP protocol suite for the LINUX |
| * operating system. INET is implemented using the BSD Socket |
| * interface as the means of communication with the user level. |
| * |
| * Holds initial configuration information for devices. |
| * |
| * NOTE: This file is a nice idea, but its current format does not work |
| * well for drivers that support multiple units, like the SLIP |
| * driver. We should actually have only one pointer to a driver |
| * here, with the driver knowing how many units it supports. |
| * Currently, the SLIP driver abuses the "base_addr" integer |
| * field of the 'device' structure to store the unit number... |
| * -FvK |
| * |
| * Version: @(#)Space.c 1.0.7 05/28/93 |
| * |
| * Authors: Ross Biro, <bir7@leland.Stanford.Edu> |
| * Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG> |
| * Donald J. Becker, <becker@super.org> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| */ |
| #include <linux/config.h> |
| #include <linux/ddi.h> |
| #include "dev.h" |
| |
| |
| #define LOOPBACK /* always present, right? */ |
| |
| |
| #define NEXT_DEV NULL |
| |
| |
| #ifdef D_LINK |
| extern int d_link_init(struct device *); |
| static struct device d_link_dev = { |
| "dl0", |
| 0, |
| 0, |
| 0, |
| 0, |
| D_LINK_IO, |
| D_LINK_IRQ, |
| 0, 0, 0, |
| NEXT_DEV, |
| d_link_init |
| }; |
| # undef NEXT_DEV |
| # define NEXT_DEV (&d_link_dev) |
| #endif |
| |
| |
| #ifdef EL1 |
| # ifndef EL1_IRQ |
| # define EL1_IRQ 9 |
| # endif |
| extern int el1_init(struct device *); |
| static struct device el1_dev = { |
| "el0", |
| 0, |
| 0, |
| 0, |
| 0, |
| EL1, |
| EL1_IRQ, |
| 0, 0, 0, |
| NEXT_DEV, |
| el1_init |
| }; |
| # undef NEXT_DEV |
| # define NEXT_DEV (&el1_dev) |
| #endif /* EL1 */ |
| |
| #if defined(EI8390) || defined(EL2) || defined(NE2000) \ |
| || defined(WD80x3) || defined(HPLAN) |
| # ifndef EI8390 |
| # define EI8390 0 |
| # endif |
| # ifndef EI8390_IRQ |
| # define EI8390_IRQ 0 |
| # endif |
| extern int ethif_init(struct device *); |
| static struct device ei8390_dev = { |
| "eth0", |
| 0, /* auto-config */ |
| 0, |
| 0, |
| 0, |
| EI8390, |
| EI8390_IRQ, |
| 0, 0, 0, |
| NEXT_DEV, |
| ethif_init |
| }; |
| # undef NEXT_DEV |
| # define NEXT_DEV (&ei8390_dev) |
| #endif /* The EI8390 drivers. */ |
| |
| #ifdef PLIP |
| extern int plip_init(struct device *); |
| static struct device plip2_dev = { |
| "plip2", |
| 0, |
| 0, |
| 0, |
| 0, |
| 0x278, |
| 2, |
| 0, 0, 0, |
| NEXT_DEV, |
| plip_init |
| }; |
| static struct device plip1_dev = { |
| "plip1", |
| 0, |
| 0, |
| 0, |
| 0, |
| 0x378, |
| 7, |
| 0, 0, 0, |
| &plip2_dev, |
| plip_init |
| }; |
| static struct device plip0_dev = { |
| "plip0", |
| 0, |
| 0, |
| 0, |
| 0, |
| 0x3BC, |
| 5, |
| 0, 0, 0, |
| &plip1_dev, |
| plip_init |
| }; |
| # undef NEXT_DEV |
| # define NEXT_DEV (&plip0_dev) |
| #endif /* PLIP */ |
| |
| |
| #ifdef SLIP |
| extern int slip_init(struct device *); |
| static struct device slip3_dev = { |
| "sl3", /* Internal SLIP driver, channel 3 */ |
| 0x0, /* recv memory end */ |
| 0x0, /* recv memory start */ |
| 0x0, /* memory end */ |
| 0x0, /* memory start */ |
| 0x3, /* base I/O address */ |
| 0, /* IRQ */ |
| 0, 0, 0, /* flags */ |
| NEXT_DEV, /* next device */ |
| slip_init /* slip_init should set up the rest */ |
| }; |
| static struct device slip2_dev = { |
| "sl2", /* Internal SLIP driver, channel 2 */ |
| 0x0, /* recv memory end */ |
| 0x0, /* recv memory start */ |
| 0x0, /* memory end */ |
| 0x0, /* memory start */ |
| 0x2, /* base I/O address */ |
| 0, /* IRQ */ |
| 0, 0, 0, /* flags */ |
| &slip3_dev, /* next device */ |
| slip_init /* slip_init should set up the rest */ |
| }; |
| static struct device slip1_dev = { |
| "sl1", /* Internal SLIP driver, channel 1 */ |
| 0x0, /* recv memory end */ |
| 0x0, /* recv memory start */ |
| 0x0, /* memory end */ |
| 0x0, /* memory start */ |
| 0x1, /* base I/O address */ |
| 0, /* IRQ */ |
| 0, 0, 0, /* flags */ |
| &slip2_dev, /* next device */ |
| slip_init /* slip_init should set up the rest */ |
| }; |
| static struct device slip0_dev = { |
| "sl0", /* Internal SLIP driver, channel 0 */ |
| 0x0, /* recv memory end */ |
| 0x0, /* recv memory start */ |
| 0x0, /* memory end */ |
| 0x0, /* memory start */ |
| 0x0, /* base I/O address */ |
| 0, /* IRQ */ |
| 0, 0, 0, /* flags */ |
| &slip1_dev, /* next device */ |
| slip_init /* slip_init should set up the rest */ |
| }; |
| # undef NEXT_DEV |
| # define NEXT_DEV (&slip0_dev) |
| #endif /* SLIP */ |
| |
| |
| #ifdef LOOPBACK |
| extern int loopback_init(struct device *dev); |
| static struct device loopback_dev = { |
| "lo", /* Software Loopback interface */ |
| -1, /* recv memory end */ |
| 0x0, /* recv memory start */ |
| -1, /* memory end */ |
| 0, /* memory start */ |
| 0, /* base I/O address */ |
| 0, /* IRQ */ |
| 0, 0, 0, /* flags */ |
| NEXT_DEV, /* next device */ |
| loopback_init /* loopback_init should set up the rest */ |
| }; |
| # undef NEXT_DEV |
| # define NEXT_DEV (&loopback_dev) |
| #endif |
| |
| |
| struct device *dev_base = NEXT_DEV; |