blob: 84cc0bdda3aecd0d5065f7d3a0b471f3eb524383 [file] [log] [blame]
/*
* omap_hwmod implementation for OMAP2/3/4
*
* Copyright (C) 2009-2011 Nokia Corporation
* Copyright (C) 2011 Texas Instruments, Inc.
*
* Paul Walmsley, BenoƮt Cousson, Kevin Hilman
*
* Created in collaboration with (alphabetical order): Thara Gopinath,
* Tony Lindgren, Rajendra Nayak, Vikram Pandita, Sakari Poussa, Anand
* Sawant, Santosh Shilimkar, Richard Woodruff
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Introduction
* ------------
* One way to view an OMAP SoC is as a collection of largely unrelated
* IP blocks connected by interconnects. The IP blocks include
* devices such as ARM processors, audio serial interfaces, UARTs,
* etc. Some of these devices, like the DSP, are created by TI;
* others, like the SGX, largely originate from external vendors. In
* TI's documentation, on-chip devices are referred to as "OMAP
* modules." Some of these IP blocks are identical across several
* OMAP versions. Others are revised frequently.
*
* These OMAP modules are tied together by various interconnects.
* Most of the address and data flow between modules is via OCP-based
* interconnects such as the L3 and L4 buses; but there are other
* interconnects that distribute the hardware clock tree, handle idle
* and reset signaling, supply power, and connect the modules to
* various pads or balls on the OMAP package.
*
* OMAP hwmod provides a consistent way to describe the on-chip
* hardware blocks and their integration into the rest of the chip.
* This description can be automatically generated from the TI
* hardware database. OMAP hwmod provides a standard, consistent API
* to reset, enable, idle, and disable these hardware blocks. And
* hwmod provides a way for other core code, such as the Linux device
* code or the OMAP power management and address space mapping code,
* to query the hardware database.
*
* Using hwmod
* -----------
* Drivers won't call hwmod functions directly. That is done by the
* omap_device code, and in rare occasions, by custom integration code
* in arch/arm/ *omap*. The omap_device code includes functions to
* build a struct platform_device using omap_hwmod data, and that is
* currently how hwmod data is communicated to drivers and to the
* Linux driver model. Most drivers will call omap_hwmod functions only
* indirectly, via pm_runtime*() functions.
*
* From a layering perspective, here is where the OMAP hwmod code
* fits into the kernel software stack:
*
* +-------------------------------+
* | Device driver code |
* | (e.g., drivers/) |
* +-------------------------------+
* | Linux driver model |
* | (platform_device / |
* | platform_driver data/code) |
* +-------------------------------+
* | OMAP core-driver integration |
* |(arch/arm/mach-omap2/devices.c)|
* +-------------------------------+
* | omap_device code |
* | (../plat-omap/omap_device.c) |
* +-------------------------------+
* ----> | omap_hwmod code/data | <-----
* | (../mach-omap2/omap_hwmod*) |
* +-------------------------------+
* | OMAP clock/PRCM/register fns |
* | (__raw_{read,write}l, clk*) |
* +-------------------------------+
*
* Device drivers should not contain any OMAP-specific code or data in
* them. They should only contain code to operate the IP block that
* the driver is responsible for. This is because these IP blocks can
* also appear in other SoCs, either from TI (such as DaVinci) or from
* other manufacturers; and drivers should be reusable across other
* platforms.
*
* The OMAP hwmod code also will attempt to reset and idle all on-chip
* devices upon boot. The goal here is for the kernel to be
* completely self-reliant and independent from bootloaders. This is
* to ensure a repeatable configuration, both to ensure consistent
* runtime behavior, and to make it easier for others to reproduce
* bugs.
*
* OMAP module activity states
* ---------------------------
* The hwmod code considers modules to be in one of several activity
* states. IP blocks start out in an UNKNOWN state, then once they
* are registered via the hwmod code, proceed to the REGISTERED state.
* Once their clock names are resolved to clock pointers, the module
* enters the CLKS_INITED state; and finally, once the module has been
* reset and the integration registers programmed, the INITIALIZED state
* is entered. The hwmod code will then place the module into either
* the IDLE state to save power, or in the case of a critical system
* module, the ENABLED state.
*
* OMAP core integration code can then call omap_hwmod*() functions
* directly to move the module between the IDLE, ENABLED, and DISABLED
* states, as needed. This is done during both the PM idle loop, and
* in the OMAP core integration code's implementation of the PM runtime
* functions.
*
* References
* ----------
* This is a partial list.
* - OMAP2420 Multimedia Processor Silicon Revision 2.1.1, 2.2 (SWPU064)
* - OMAP2430 Multimedia Device POP Silicon Revision 2.1 (SWPU090)
* - OMAP34xx Multimedia Device Silicon Revision 3.1 (SWPU108)
* - OMAP4430 Multimedia Device Silicon Revision 1.0 (SWPU140)
* - Open Core Protocol Specification 2.2
*
* To do:
* - handle IO mapping
* - bus throughput & module latency measurement code
*
* XXX add tests at the beginning of each function to ensure the hwmod is
* in the appropriate state
* XXX error return values should be checked to ensure that they are
* appropriate
*/
#undef DEBUG
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/list.h>
#include <linux/mutex.h>
#include <linux/spinlock.h>
#include <plat/common.h>
#include <plat/cpu.h>
#include "clockdomain.h"
#include "powerdomain.h"
#include <plat/clock.h>
#include <plat/omap_hwmod.h>
#include <plat/prcm.h>
#include "cm2xxx_3xxx.h"
#include "cminst44xx.h"
#include "prm2xxx_3xxx.h"
#include "prm44xx.h"
#include "prminst44xx.h"
#include "mux.h"
/* Maximum microseconds to wait for OMAP module to softreset */
#define MAX_MODULE_SOFTRESET_WAIT 10000
/* Name of the OMAP hwmod for the MPU */
#define MPU_INITIATOR_NAME "mpu"
/* omap_hwmod_list contains all registered struct omap_hwmods */
static LIST_HEAD(omap_hwmod_list);
/* mpu_oh: used to add/remove MPU initiator from sleepdep list */
static struct omap_hwmod *mpu_oh;
/* Private functions */
/**
* _update_sysc_cache - return the module OCP_SYSCONFIG register, keep copy
* @oh: struct omap_hwmod *
*
* Load the current value of the hwmod OCP_SYSCONFIG register into the
* struct omap_hwmod for later use. Returns -EINVAL if the hwmod has no
* OCP_SYSCONFIG register or 0 upon success.
*/
static int _update_sysc_cache(struct omap_hwmod *oh)
{
if (!oh->class->sysc) {
WARN(1, "omap_hwmod: %s: cannot read OCP_SYSCONFIG: not defined on hwmod's class\n", oh->name);
return -EINVAL;
}
/* XXX ensure module interface clock is up */
oh->_sysc_cache = omap_hwmod_read(oh, oh->class->sysc->sysc_offs);
if (!(oh->class->sysc->sysc_flags & SYSC_NO_CACHE))
oh->_int_flags |= _HWMOD_SYSCONFIG_LOADED;
return 0;
}
/**
* _write_sysconfig - write a value to the module's OCP_SYSCONFIG register
* @v: OCP_SYSCONFIG value to write
* @oh: struct omap_hwmod *
*
* Write @v into the module class' OCP_SYSCONFIG register, if it has
* one. No return value.
*/
static void _write_sysconfig(u32 v, struct omap_hwmod *oh)
{
if (!oh->class->sysc) {
WARN(1, "omap_hwmod: %s: cannot write OCP_SYSCONFIG: not defined on hwmod's class\n", oh->name);
return;
}
/* XXX ensure module interface clock is up */
/* Module might have lost context, always update cache and register */
oh->_sysc_cache = v;
omap_hwmod_write(v, oh, oh->class->sysc->sysc_offs);
}
/**
* _set_master_standbymode: set the OCP_SYSCONFIG MIDLEMODE field in @v
* @oh: struct omap_hwmod *
* @standbymode: MIDLEMODE field bits
* @v: pointer to register contents to modify
*
* Update the master standby mode bits in @v to be @standbymode for
* the @oh hwmod. Does not write to the hardware. Returns -EINVAL
* upon error or 0 upon success.
*/
static int _set_master_standbymode(struct omap_hwmod *oh, u8 standbymode,
u32 *v)
{
u32 mstandby_mask;
u8 mstandby_shift;
if (!oh->class->sysc ||
!(oh->class->sysc->sysc_flags & SYSC_HAS_MIDLEMODE))
return -EINVAL;
if (!oh->class->sysc->sysc_fields) {
WARN(1, "omap_hwmod: %s: offset struct for sysconfig not provided in class\n", oh->name);
return -EINVAL;
}
mstandby_shift = oh->class->sysc->sysc_fields->midle_shift;
mstandby_mask = (0x3 << mstandby_shift);
*v &= ~mstandby_mask;
*v |= __ffs(standbymode) << mstandby_shift;
return 0;
}
/**
* _set_slave_idlemode: set the OCP_SYSCONFIG SIDLEMODE field in @v
* @oh: struct omap_hwmod *
* @idlemode: SIDLEMODE field bits
* @v: pointer to register contents to modify
*
* Update the slave idle mode bits in @v to be @idlemode for the @oh
* hwmod. Does not write to the hardware. Returns -EINVAL upon error
* or 0 upon success.
*/
static int _set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode, u32 *v)
{
u32 sidle_mask;
u8 sidle_shift;
if (!oh->class->sysc ||
!(oh->class->sysc->sysc_flags & SYSC_HAS_SIDLEMODE))
return -EINVAL;
if (!oh->class->sysc->sysc_fields) {
WARN(1, "omap_hwmod: %s: offset struct for sysconfig not provided in class\n", oh->name);
return -EINVAL;
}
sidle_shift = oh->class->sysc->sysc_fields->sidle_shift;
sidle_mask = (0x3 << sidle_shift);
*v &= ~sidle_mask;
*v |= __ffs(idlemode) << sidle_shift;
return 0;
}
/**
* _set_clockactivity: set OCP_SYSCONFIG.CLOCKACTIVITY bits in @v
* @oh: struct omap_hwmod *
* @clockact: CLOCKACTIVITY field bits
* @v: pointer to register contents to modify
*
* Update the clockactivity mode bits in @v to be @clockact for the
* @oh hwmod. Used for additional powersaving on some modules. Does
* not write to the hardware. Returns -EINVAL upon error or 0 upon
* success.
*/
static int _set_clockactivity(struct omap_hwmod *oh, u8 clockact, u32 *v)
{
u32 clkact_mask;
u8 clkact_shift;
if (!oh->class->sysc ||
!(oh->class->sysc->sysc_flags & SYSC_HAS_CLOCKACTIVITY))
return -EINVAL;
if (!oh->class->sysc->sysc_fields) {
WARN(1, "omap_hwmod: %s: offset struct for sysconfig not provided in class\n", oh->name);
return -EINVAL;
}
clkact_shift = oh->class->sysc->sysc_fields->clkact_shift;
clkact_mask = (0x3 << clkact_shift);
*v &= ~clkact_mask;
*v |= clockact << clkact_shift;
return 0;
}
/**
* _set_softreset: set OCP_SYSCONFIG.CLOCKACTIVITY bits in @v
* @oh: struct omap_hwmod *
* @v: pointer to register contents to modify
*
* Set the SOFTRESET bit in @v for hwmod @oh. Returns -EINVAL upon
* error or 0 upon success.
*/
static int _set_softreset(struct omap_hwmod *oh, u32 *v)
{
u32 softrst_mask;
if (!oh->class->sysc ||
!(oh->class->sysc->sysc_flags & SYSC_HAS_SOFTRESET))
return -EINVAL;
if (!oh->class->sysc->sysc_fields) {
WARN(1, "omap_hwmod: %s: offset struct for sysconfig not provided in class\n", oh->name);
return -EINVAL;
}
softrst_mask = (0x1 << oh->class->sysc->sysc_fields->srst_shift);
*v |= softrst_mask;
return 0;
}
/**
* _set_module_autoidle: set the OCP_SYSCONFIG AUTOIDLE field in @v
* @oh: struct omap_hwmod *
* @autoidle: desired AUTOIDLE bitfield value (0 or 1)
* @v: pointer to register contents to modify
*
* Update the module autoidle bit in @v to be @autoidle for the @oh
* hwmod. The autoidle bit controls whether the module can gate
* internal clocks automatically when it isn't doing anything; the
* exact function of this bit varies on a per-module basis. This
* function does not write to the hardware. Returns -EINVAL upon
* error or 0 upon success.
*/
static int _set_module_autoidle(struct omap_hwmod *oh, u8 autoidle,
u32 *v)
{
u32 autoidle_mask;
u8 autoidle_shift;
if (!oh->class->sysc ||
!(oh->class->sysc->sysc_flags & SYSC_HAS_AUTOIDLE))
return -EINVAL;
if (!oh->class->sysc->sysc_fields) {
WARN(1, "omap_hwmod: %s: offset struct for sysconfig not provided in class\n", oh->name);
return -EINVAL;
}
autoidle_shift = oh->class->sysc->sysc_fields->autoidle_shift;
autoidle_mask = (0x1 << autoidle_shift);
*v &= ~autoidle_mask;
*v |= autoidle << autoidle_shift;
return 0;
}
/**
* _enable_wakeup: set OCP_SYSCONFIG.ENAWAKEUP bit in the hardware
* @oh: struct omap_hwmod *
*
* Allow the hardware module @oh to send wakeups. Returns -EINVAL
* upon error or 0 upon success.
*/
static int _enable_wakeup(struct omap_hwmod *oh, u32 *v)
{
if (!oh->class->sysc ||
!((oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP) ||
(oh->class->sysc->idlemodes & SIDLE_SMART_WKUP) ||
(oh->class->sysc->idlemodes & MSTANDBY_SMART_WKUP)))
return -EINVAL;
if (!oh->class->sysc->sysc_fields) {
WARN(1, "omap_hwmod: %s: offset struct for sysconfig not provided in class\n", oh->name);
return -EINVAL;
}
if (oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP)
*v |= 0x1 << oh->class->sysc->sysc_fields->enwkup_shift;
if (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP)
_set_slave_idlemode(oh, HWMOD_IDLEMODE_SMART_WKUP, v);
if (oh->class->sysc->idlemodes & MSTANDBY_SMART_WKUP)
_set_master_standbymode(oh, HWMOD_IDLEMODE_SMART_WKUP, v);
/* XXX test pwrdm_get_wken for this hwmod's subsystem */
oh->_int_flags |= _HWMOD_WAKEUP_ENABLED;
return 0;
}
/**
* _disable_wakeup: clear OCP_SYSCONFIG.ENAWAKEUP bit in the hardware
* @oh: struct omap_hwmod *
*
* Prevent the hardware module @oh to send wakeups. Returns -EINVAL
* upon error or 0 upon success.
*/
static int _disable_wakeup(struct omap_hwmod *oh, u32 *v)
{
if (!oh->class->sysc ||
!((oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP) ||
(oh->class->sysc->idlemodes & SIDLE_SMART_WKUP) ||
(oh->class->sysc->idlemodes & MSTANDBY_SMART_WKUP)))
return -EINVAL;
if (!oh->class->sysc->sysc_fields) {
WARN(1, "omap_hwmod: %s: offset struct for sysconfig not provided in class\n", oh->name);
return -EINVAL;
}
if (oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP)
*v &= ~(0x1 << oh->class->sysc->sysc_fields->enwkup_shift);
if (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP)
_set_slave_idlemode(oh, HWMOD_IDLEMODE_SMART, v);
if (oh->class->sysc->idlemodes & MSTANDBY_SMART_WKUP)
_set_master_standbymode(oh, HWMOD_IDLEMODE_SMART_WKUP, v);
/* XXX test pwrdm_get_wken for this hwmod's subsystem */
oh->_int_flags &= ~_HWMOD_WAKEUP_ENABLED;
return 0;
}
/**
* _add_initiator_dep: prevent @oh from smart-idling while @init_oh is active
* @oh: struct omap_hwmod *
*
* Prevent the hardware module @oh from entering idle while the
* hardare module initiator @init_oh is active. Useful when a module
* will be accessed by a particular initiator (e.g., if a module will
* be accessed by the IVA, there should be a sleepdep between the IVA
* initiator and the module). Only applies to modules in smart-idle
* mode. If the clockdomain is marked as not needing autodeps, return
* 0 without doing anything. Otherwise, returns -EINVAL upon error or
* passes along clkdm_add_sleepdep() value upon success.
*/
static int _add_initiator_dep(struct omap_hwmod *oh, struct omap_hwmod *init_oh)
{
if (!oh->_clk)
return -EINVAL;
if (oh->_clk->clkdm && oh->_clk->clkdm->flags & CLKDM_NO_AUTODEPS)
return 0;
return clkdm_add_sleepdep(oh->_clk->clkdm, init_oh->_clk->clkdm);
}
/**
* _del_initiator_dep: allow @oh to smart-idle even if @init_oh is active
* @oh: struct omap_hwmod *
*
* Allow the hardware module @oh to enter idle while the hardare
* module initiator @init_oh is active. Useful when a module will not
* be accessed by a particular initiator (e.g., if a module will not
* be accessed by the IVA, there should be no sleepdep between the IVA
* initiator and the module). Only applies to modules in smart-idle
* mode. If the clockdomain is marked as not needing autodeps, return
* 0 without doing anything. Returns -EINVAL upon error or passes
* along clkdm_del_sleepdep() value upon success.
*/
static int _del_initiator_dep(struct omap_hwmod *oh, struct omap_hwmod *init_oh)
{
if (!oh->_clk)
return -EINVAL;
if (oh->_clk->clkdm && oh->_clk->clkdm->flags & CLKDM_NO_AUTODEPS)
return 0;
return clkdm_del_sleepdep(oh->_clk->clkdm, init_oh->_clk->clkdm);
}
/**
* _init_main_clk - get a struct clk * for the the hwmod's main functional clk
* @oh: struct omap_hwmod *
*
* Called from _init_clocks(). Populates the @oh _clk (main
* functional clock pointer) if a main_clk is present. Returns 0 on
* success or -EINVAL on error.
*/
static int _init_main_clk(struct omap_hwmod *oh)
{
int ret = 0;
if (!oh->main_clk)
return 0;
oh->_clk = omap_clk_get_by_name(oh->main_clk);
if (!oh->_clk) {
pr_warning("omap_hwmod: %s: cannot clk_get main_clk %s\n",
oh->name, oh->main_clk);
return -EINVAL;
}
if (!oh->_clk->clkdm)
pr_warning("omap_hwmod: %s: missing clockdomain for %s.\n",
oh->main_clk, oh->_clk->name);
return ret;
}
/**
* _init_interface_clks - get a struct clk * for the the hwmod's interface clks
* @oh: struct omap_hwmod *
*
* Called from _init_clocks(). Populates the @oh OCP slave interface
* clock pointers. Returns 0 on success or -EINVAL on error.
*/
static int _init_interface_clks(struct omap_hwmod *oh)
{
struct clk *c;
int i;
int ret = 0;
if (oh->slaves_cnt == 0)
return 0;
for (i = 0; i < oh->slaves_cnt; i++) {
struct omap_hwmod_ocp_if *os = oh->slaves[i];
if (!os->clk)
continue;
c = omap_clk_get_by_name(os->clk);
if (!c) {
pr_warning("omap_hwmod: %s: cannot clk_get interface_clk %s\n",
oh->name, os->clk);
ret = -EINVAL;
}
os->_clk = c;
}
return ret;
}
/**
* _init_opt_clk - get a struct clk * for the the hwmod's optional clocks
* @oh: struct omap_hwmod *
*
* Called from _init_clocks(). Populates the @oh omap_hwmod_opt_clk
* clock pointers. Returns 0 on success or -EINVAL on error.
*/
static int _init_opt_clks(struct omap_hwmod *oh)
{
struct omap_hwmod_opt_clk *oc;
struct clk *c;
int i;
int ret = 0;
for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++) {
c = omap_clk_get_by_name(oc->clk);
if (!c) {
pr_warning("omap_hwmod: %s: cannot clk_get opt_clk %s\n",
oh->name, oc->clk);
ret = -EINVAL;
}
oc->_clk = c;
}
return ret;
}
/**
* _enable_clocks - enable hwmod main clock and interface clocks
* @oh: struct omap_hwmod *
*
* Enables all clocks necessary for register reads and writes to succeed
* on the hwmod @oh. Returns 0.
*/
static int _enable_clocks(struct omap_hwmod *oh)
{
int i;
pr_debug("omap_hwmod: %s: enabling clocks\n", oh->name);
if (oh->_clk)
clk_enable(oh->_clk);
if (oh->slaves_cnt > 0) {
for (i = 0; i < oh->slaves_cnt; i++) {
struct omap_hwmod_ocp_if *os = oh->slaves[i];
struct clk *c = os->_clk;
if (c && (os->flags & OCPIF_SWSUP_IDLE))
clk_enable(c);
}
}
/* The opt clocks are controlled by the device driver. */
return 0;
}
/**
* _disable_clocks - disable hwmod main clock and interface clocks
* @oh: struct omap_hwmod *
*
* Disables the hwmod @oh main functional and interface clocks. Returns 0.
*/
static int _disable_clocks(struct omap_hwmod *oh)
{
int i;
pr_debug("omap_hwmod: %s: disabling clocks\n", oh->name);
if (oh->_clk)
clk_disable(oh->_clk);
if (oh->slaves_cnt > 0) {
for (i = 0; i < oh->slaves_cnt; i++) {
struct omap_hwmod_ocp_if *os = oh->slaves[i];
struct clk *c = os->_clk;
if (c && (os->flags & OCPIF_SWSUP_IDLE))
clk_disable(c);
}
}
/* The opt clocks are controlled by the device driver. */
return 0;
}
static void _enable_optional_clocks(struct omap_hwmod *oh)
{
struct omap_hwmod_opt_clk *oc;
int i;
pr_debug("omap_hwmod: %s: enabling optional clocks\n", oh->name);
for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
if (oc->_clk) {
pr_debug("omap_hwmod: enable %s:%s\n", oc->role,
oc->_clk->name);
clk_enable(oc->_clk);
}
}
static void _disable_optional_clocks(struct omap_hwmod *oh)
{
struct omap_hwmod_opt_clk *oc;
int i;
pr_debug("omap_hwmod: %s: disabling optional clocks\n", oh->name);
for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
if (oc->_clk) {
pr_debug("omap_hwmod: disable %s:%s\n", oc->role,
oc->_clk->name);
clk_disable(oc->_clk);
}
}
/**
* _enable_module - enable CLKCTRL modulemode on OMAP4
* @oh: struct omap_hwmod *
*
* Enables the PRCM module mode related to the hwmod @oh.
* No return value.
*/
static void _enable_module(struct omap_hwmod *oh)
{
/* The module mode does not exist prior OMAP4 */
if (cpu_is_omap24xx() || cpu_is_omap34xx())
return;
if (!oh->clkdm || !oh->prcm.omap4.modulemode)
return;
pr_debug("omap_hwmod: %s: _enable_module: %d\n",
oh->name, oh->prcm.omap4.modulemode);
omap4_cminst_module_enable(oh->prcm.omap4.modulemode,
oh->clkdm->prcm_partition,
oh->clkdm->cm_inst,
oh->clkdm->clkdm_offs,
oh->prcm.omap4.clkctrl_offs);
}
/**
* _disable_module - enable CLKCTRL modulemode on OMAP4
* @oh: struct omap_hwmod *
*
* Disable the PRCM module mode related to the hwmod @oh.
* No return value.
*/
static void _disable_module(struct omap_hwmod *oh)
{
/* The module mode does not exist prior OMAP4 */
if (cpu_is_omap24xx() || cpu_is_omap34xx())
return;
if (!oh->clkdm || !oh->prcm.omap4.modulemode)
return;
pr_debug("omap_hwmod: %s: _disable_module\n", oh->name);
omap4_cminst_module_disable(oh->clkdm->prcm_partition,
oh->clkdm->cm_inst,
oh->clkdm->clkdm_offs,
oh->prcm.omap4.clkctrl_offs);
}
/**
* _count_mpu_irqs - count the number of MPU IRQ lines associated with @oh
* @oh: struct omap_hwmod *oh
*
* Count and return the number of MPU IRQs associated with the hwmod
* @oh. Used to allocate struct resource data. Returns 0 if @oh is
* NULL.
*/
static int _count_mpu_irqs(struct omap_hwmod *oh)
{
struct omap_hwmod_irq_info *ohii;
int i = 0;
if (!oh || !oh->mpu_irqs)
return 0;
do {
ohii = &oh->mpu_irqs[i++];
} while (ohii->irq != -1);
return i;
}
/**
* _count_sdma_reqs - count the number of SDMA request lines associated with @oh
* @oh: struct omap_hwmod *oh
*
* Count and return the number of SDMA request lines associated with
* the hwmod @oh. Used to allocate struct resource data. Returns 0
* if @oh is NULL.
*/
static int _count_sdma_reqs(struct omap_hwmod *oh)
{
struct omap_hwmod_dma_info *ohdi;
int i = 0;
if (!oh || !oh->sdma_reqs)
return 0;
do {
ohdi = &oh->sdma_reqs[i++];
} while (ohdi->dma_req != -1);
return i;
}
/**
* _count_ocp_if_addr_spaces - count the number of address space entries for @oh
* @oh: struct omap_hwmod *oh
*
* Count and return the number of address space ranges associated with
* the hwmod @oh. Used to allocate struct resource data. Returns 0
* if @oh is NULL.
*/
static int _count_ocp_if_addr_spaces(struct omap_hwmod_ocp_if *os)
{
struct omap_hwmod_addr_space *mem;
int i = 0;
if (!os || !os->addr)
return 0;
do {
mem = &os->addr[i++];
} while (mem->pa_start != mem->pa_end);
return i;
}
/**
* _find_mpu_port_index - find hwmod OCP slave port ID intended for MPU use
* @oh: struct omap_hwmod *
*
* Returns the array index of the OCP slave port that the MPU
* addresses the device on, or -EINVAL upon error or not found.
*/
static int __init _find_mpu_port_index(struct omap_hwmod *oh)
{
int i;
int found = 0;
if (!oh || oh->slaves_cnt == 0)
return -EINVAL;
for (i = 0; i < oh->slaves_cnt; i++) {
struct omap_hwmod_ocp_if *os = oh->slaves[i];
if (os->user & OCP_USER_MPU) {
found = 1;
break;
}
}
if (found)
pr_debug("omap_hwmod: %s: MPU OCP slave port ID %d\n",
oh->name, i);
else
pr_debug("omap_hwmod: %s: no MPU OCP slave port found\n",
oh->name);
return (found) ? i : -EINVAL;
}
/**
* _find_mpu_rt_base - find hwmod register target base addr accessible by MPU
* @oh: struct omap_hwmod *
*
* Return the virtual address of the base of the register target of
* device @oh, or NULL on error.
*/
static void __iomem * __init _find_mpu_rt_base(struct omap_hwmod *oh, u8 index)
{
struct omap_hwmod_ocp_if *os;
struct omap_hwmod_addr_space *mem;
int i = 0, found = 0;
void __iomem *va_start;
if (!oh || oh->slaves_cnt == 0)
return NULL;
os = oh->slaves[index];
if (!os->addr)
return NULL;
do {
mem = &os->addr[i++];
if (mem->flags & ADDR_TYPE_RT)
found = 1;
} while (!found && mem->pa_start != mem->pa_end);
if (found) {
va_start = ioremap(mem->pa_start, mem->pa_end - mem->pa_start);
if (!va_start) {
pr_err("omap_hwmod: %s: Could not ioremap\n", oh->name);
return NULL;
}
pr_debug("omap_hwmod: %s: MPU register target at va %p\n",
oh->name, va_start);
} else {
pr_debug("omap_hwmod: %s: no MPU register target found\n",
oh->name);
}
return (found) ? va_start : NULL;
}
/**
* _enable_sysc - try to bring a module out of idle via OCP_SYSCONFIG
* @oh: struct omap_hwmod *
*
* If module is marked as SWSUP_SIDLE, force the module out of slave
* idle; otherwise, configure it for smart-idle. If module is marked
* as SWSUP_MSUSPEND, force the module out of master standby;
* otherwise, configure it for smart-standby. No return value.
*/
static void _enable_sysc(struct omap_hwmod *oh)
{
u8 idlemode, sf;
u32 v;
if (!oh->class->sysc)
return;
v = oh->_sysc_cache;
sf = oh->class->sysc->sysc_flags;
if (sf & SYSC_HAS_SIDLEMODE) {
idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ?
HWMOD_IDLEMODE_NO : HWMOD_IDLEMODE_SMART;
_set_slave_idlemode(oh, idlemode, &v);
}
if (sf & SYSC_HAS_MIDLEMODE) {
if (oh->flags & HWMOD_SWSUP_MSTANDBY) {
idlemode = HWMOD_IDLEMODE_NO;
} else {
if (sf & SYSC_HAS_ENAWAKEUP)
_enable_wakeup(oh, &v);
if (oh->class->sysc->idlemodes & MSTANDBY_SMART_WKUP)
idlemode = HWMOD_IDLEMODE_SMART_WKUP;
else
idlemode = HWMOD_IDLEMODE_SMART;
}
_set_master_standbymode(oh, idlemode, &v);
}
/*
* XXX The clock framework should handle this, by
* calling into this code. But this must wait until the
* clock structures are tagged with omap_hwmod entries
*/
if ((oh->flags & HWMOD_SET_DEFAULT_CLOCKACT) &&
(sf & SYSC_HAS_CLOCKACTIVITY))
_set_clockactivity(oh, oh->class->sysc->clockact, &v);
/* If slave is in SMARTIDLE, also enable wakeup */
if ((sf & SYSC_HAS_SIDLEMODE) && !(oh->flags & HWMOD_SWSUP_SIDLE))
_enable_wakeup(oh, &v);
_write_sysconfig(v, oh);
/*
* Set the autoidle bit only after setting the smartidle bit
* Setting this will not have any impact on the other modules.
*/
if (sf & SYSC_HAS_AUTOIDLE) {
idlemode = (oh->flags & HWMOD_NO_OCP_AUTOIDLE) ?
0 : 1;
_set_module_autoidle(oh, idlemode, &v);
_write_sysconfig(v, oh);
}
}
/**
* _idle_sysc - try to put a module into idle via OCP_SYSCONFIG
* @oh: struct omap_hwmod *
*
* If module is marked as SWSUP_SIDLE, force the module into slave
* idle; otherwise, configure it for smart-idle. If module is marked
* as SWSUP_MSUSPEND, force the module into master standby; otherwise,
* configure it for smart-standby. No return value.
*/
static void _idle_sysc(struct omap_hwmod *oh)
{
u8 idlemode, sf;
u32 v;
if (!oh->class->sysc)
return;
v = oh->_sysc_cache;
sf = oh->class->sysc->sysc_flags;
if (sf & SYSC_HAS_SIDLEMODE) {
idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ?
HWMOD_IDLEMODE_FORCE : HWMOD_IDLEMODE_SMART;
_set_slave_idlemode(oh, idlemode, &v);
}
if (sf & SYSC_HAS_MIDLEMODE) {
if (oh->flags & HWMOD_SWSUP_MSTANDBY) {
idlemode = HWMOD_IDLEMODE_FORCE;
} else {
if (sf & SYSC_HAS_ENAWAKEUP)
_enable_wakeup(oh, &v);
if (oh->class->sysc->idlemodes & MSTANDBY_SMART_WKUP)
idlemode = HWMOD_IDLEMODE_SMART_WKUP;
else
idlemode = HWMOD_IDLEMODE_SMART;
}
_set_master_standbymode(oh, idlemode, &v);
}
/* If slave is in SMARTIDLE, also enable wakeup */
if ((sf & SYSC_HAS_SIDLEMODE) && !(oh->flags & HWMOD_SWSUP_SIDLE))
_enable_wakeup(oh, &v);
_write_sysconfig(v, oh);
}
/**
* _shutdown_sysc - force a module into idle via OCP_SYSCONFIG
* @oh: struct omap_hwmod *
*
* Force the module into slave idle and master suspend. No return
* value.
*/
static void _shutdown_sysc(struct omap_hwmod *oh)
{
u32 v;
u8 sf;
if (!oh->class->sysc)
return;
v = oh->_sysc_cache;
sf = oh->class->sysc->sysc_flags;
if (sf & SYSC_HAS_SIDLEMODE)
_set_slave_idlemode(oh, HWMOD_IDLEMODE_FORCE, &v);
if (sf & SYSC_HAS_MIDLEMODE)
_set_master_standbymode(oh, HWMOD_IDLEMODE_FORCE, &v);
if (sf & SYSC_HAS_AUTOIDLE)
_set_module_autoidle(oh, 1, &v);
_write_sysconfig(v, oh);
}
/**
* _lookup - find an omap_hwmod by name
* @name: find an omap_hwmod by name
*
* Return a pointer to an omap_hwmod by name, or NULL if not found.
*/
static struct omap_hwmod *_lookup(const char *name)
{
struct omap_hwmod *oh, *temp_oh;
oh = NULL;
list_for_each_entry(temp_oh, &omap_hwmod_list, node) {
if (!strcmp(name, temp_oh->name)) {
oh = temp_oh;
break;
}
}
return oh;
}
/**
* _init_clkdm - look up a clockdomain name, store pointer in omap_hwmod
* @oh: struct omap_hwmod *
*
* Convert a clockdomain name stored in a struct omap_hwmod into a
* clockdomain pointer, and save it into the struct omap_hwmod.
* return -EINVAL if clkdm_name does not exist or if the lookup failed.
*/
static int _init_clkdm(struct omap_hwmod *oh)
{
if (cpu_is_omap24xx() || cpu_is_omap34xx())
return 0;
if (!oh->clkdm_name) {
pr_warning("omap_hwmod: %s: no clkdm_name\n", oh->name);
return -EINVAL;
}
oh->clkdm = clkdm_lookup(oh->clkdm_name);
if (!oh->clkdm) {
pr_warning("omap_hwmod: %s: could not associate to clkdm %s\n",
oh->name, oh->clkdm_name);
return -EINVAL;
}
pr_debug("omap_hwmod: %s: associated to clkdm %s\n",
oh->name, oh->clkdm_name);
return 0;
}
/**
* _init_clocks - clk_get() all clocks associated with this hwmod. Retrieve as
* well the clockdomain.
* @oh: struct omap_hwmod *
* @data: not used; pass NULL
*
* Called by omap_hwmod_setup_*() (after omap2_clk_init()).
* Resolves all clock names embedded in the hwmod. Returns 0 on
* success, or a negative error code on failure.
*/
static int _init_clocks(struct omap_hwmod *oh, void *data)
{
int ret = 0;
if (oh->_state != _HWMOD_STATE_REGISTERED)
return 0;
pr_debug("omap_hwmod: %s: looking up clocks\n", oh->name);
ret |= _init_main_clk(oh);
ret |= _init_interface_clks(oh);
ret |= _init_opt_clks(oh);
ret |= _init_clkdm(oh);
if (!ret)
oh->_state = _HWMOD_STATE_CLKS_INITED;
else
pr_warning("omap_hwmod: %s: cannot _init_clocks\n", oh->name);
return ret;
}
/**
* _wait_target_ready - wait for a module to leave slave idle
* @oh: struct omap_hwmod *
*
* Wait for a module @oh to leave slave idle. Returns 0 if the module
* does not have an IDLEST bit or if the module successfully leaves
* slave idle; otherwise, pass along the return value of the
* appropriate *_cm*_wait_module_ready() function.
*/
static int _wait_target_ready(struct omap_hwmod *oh)
{
struct omap_hwmod_ocp_if *os;
int ret;
if (!oh)
return -EINVAL;
if (oh->_int_flags & _HWMOD_NO_MPU_PORT)
return 0;
os = oh->slaves[oh->_mpu_port_index];
if (oh->flags & HWMOD_NO_IDLEST)
return 0;
/* XXX check module SIDLEMODE */
/* XXX check clock enable states */
if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
ret = omap2_cm_wait_module_ready(oh->prcm.omap2.module_offs,
oh->prcm.omap2.idlest_reg_id,
oh->prcm.omap2.idlest_idle_bit);
} else if (cpu_is_omap44xx()) {
if (!oh->clkdm)
return -EINVAL;
ret = omap4_cminst_wait_module_ready(oh->clkdm->prcm_partition,
oh->clkdm->cm_inst,
oh->clkdm->clkdm_offs,
oh->prcm.omap4.clkctrl_offs);
} else {
BUG();
};
return ret;
}
/**
* _wait_target_disable - wait for a module to be disabled
* @oh: struct omap_hwmod *
*
* Wait for a module @oh to enter slave idle. Returns 0 if the module
* does not have an IDLEST bit or if the module successfully enters
* slave idle; otherwise, pass along the return value of the
* appropriate *_cm*_wait_module_idle() function.
*/
static int _wait_target_disable(struct omap_hwmod *oh)
{
/* TODO: For now just handle OMAP4+ */
if (cpu_is_omap24xx() || cpu_is_omap34xx())
return 0;
if (!oh)
return -EINVAL;
if (oh->_int_flags & _HWMOD_NO_MPU_PORT)
return 0;
if (oh->flags & HWMOD_NO_IDLEST)
return 0;
return omap4_cminst_wait_module_idle(oh->clkdm->prcm_partition,
oh->clkdm->cm_inst,
oh->clkdm->clkdm_offs,
oh->prcm.omap4.clkctrl_offs);
}
/**
* _lookup_hardreset - fill register bit info for this hwmod/reset line
* @oh: struct omap_hwmod *
* @name: name of the reset line in the context of this hwmod
* @ohri: struct omap_hwmod_rst_info * that this function will fill in
*
* Return the bit position of the reset line that match the
* input name. Return -ENOENT if not found.
*/
static u8 _lookup_hardreset(struct omap_hwmod *oh, const char *name,
struct omap_hwmod_rst_info *ohri)
{
int i;
for (i = 0; i < oh->rst_lines_cnt; i++) {
const char *rst_line = oh->rst_lines[i].name;
if (!strcmp(rst_line, name)) {
ohri->rst_shift = oh->rst_lines[i].rst_shift;
ohri->st_shift = oh->rst_lines[i].st_shift;
pr_debug("omap_hwmod: %s: %s: %s: rst %d st %d\n",
oh->name, __func__, rst_line, ohri->rst_shift,
ohri->st_shift);
return 0;
}
}
return -ENOENT;
}
/**
* _assert_hardreset - assert the HW reset line of submodules
* contained in the hwmod module.
* @oh: struct omap_hwmod *
* @name: name of the reset line to lookup and assert
*
* Some IP like dsp, ipu or iva contain processor that require
* an HW reset line to be assert / deassert in order to enable fully
* the IP.
*/
static int _assert_hardreset(struct omap_hwmod *oh, const char *name)
{
struct omap_hwmod_rst_info ohri;
u8 ret;
if (!oh)
return -EINVAL;
ret = _lookup_hardreset(oh, name, &ohri);
if (IS_ERR_VALUE(ret))
return ret;
if (cpu_is_omap24xx() || cpu_is_omap34xx())
return omap2_prm_assert_hardreset(oh->prcm.omap2.module_offs,
ohri.rst_shift);
else if (cpu_is_omap44xx())
return omap4_prminst_assert_hardreset(ohri.rst_shift,
oh->clkdm->pwrdm.ptr->prcm_partition,
oh->clkdm->pwrdm.ptr->prcm_offs,
oh->prcm.omap4.rstctrl_offs);
else
return -EINVAL;
}
/**
* _deassert_hardreset - deassert the HW reset line of submodules contained
* in the hwmod module.
* @oh: struct omap_hwmod *
* @name: name of the reset line to look up and deassert
*
* Some IP like dsp, ipu or iva contain processor that require
* an HW reset line to be assert / deassert in order to enable fully
* the IP.
*/
static int _deassert_hardreset(struct omap_hwmod *oh, const char *name)
{
struct omap_hwmod_rst_info ohri;
int ret;
if (!oh)
return -EINVAL;
ret = _lookup_hardreset(oh, name, &ohri);
if (IS_ERR_VALUE(ret))
return ret;
if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
ret = omap2_prm_deassert_hardreset(oh->prcm.omap2.module_offs,
ohri.rst_shift,
ohri.st_shift);
} else if (cpu_is_omap44xx()) {
if (ohri.st_shift)
pr_err("omap_hwmod: %s: %s: hwmod data error: OMAP4 does not support st_shift\n",
oh->name, name);
ret = omap4_prminst_deassert_hardreset(ohri.rst_shift,
oh->clkdm->pwrdm.ptr->prcm_partition,
oh->clkdm->pwrdm.ptr->prcm_offs,
oh->prcm.omap4.rstctrl_offs);
} else {
return -EINVAL;
}
if (ret == -EBUSY)
pr_warning("omap_hwmod: %s: failed to hardreset\n", oh->name);
return ret;
}
/**
* _read_hardreset - read the HW reset line state of submodules
* contained in the hwmod module
* @oh: struct omap_hwmod *
* @name: name of the reset line to look up and read
*
* Return the state of the reset line.
*/
static int _read_hardreset(struct omap_hwmod *oh, const char *name)
{
struct omap_hwmod_rst_info ohri;
u8 ret;
if (!oh)
return -EINVAL;
ret = _lookup_hardreset(oh, name, &ohri);
if (IS_ERR_VALUE(ret))
return ret;
if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
return omap2_prm_is_hardreset_asserted(oh->prcm.omap2.module_offs,
ohri.st_shift);
} else if (cpu_is_omap44xx()) {
return omap4_prminst_is_hardreset_asserted(ohri.rst_shift,
oh->clkdm->pwrdm.ptr->prcm_partition,
oh->clkdm->pwrdm.ptr->prcm_offs,
oh->prcm.omap4.rstctrl_offs);
} else {
return -EINVAL;
}
}
/**
* _ocp_softreset - reset an omap_hwmod via the OCP_SYSCONFIG bit
* @oh: struct omap_hwmod *
*
* Resets an omap_hwmod @oh via the OCP_SYSCONFIG bit. hwmod must be
* enabled for this to work. Returns -EINVAL if the hwmod cannot be
* reset this way or if the hwmod is in the wrong state, -ETIMEDOUT if
* the module did not reset in time, or 0 upon success.
*
* In OMAP3 a specific SYSSTATUS register is used to get the reset status.
* Starting in OMAP4, some IPs do not have SYSSTATUS registers and instead
* use the SYSCONFIG softreset bit to provide the status.
*
* Note that some IP like McBSP do have reset control but don't have
* reset status.
*/
static int _ocp_softreset(struct omap_hwmod *oh)
{
u32 v;
int c = 0;
int ret = 0;
if (!oh->class->sysc ||
!(oh->class->sysc->sysc_flags & SYSC_HAS_SOFTRESET))
return -EINVAL;
/* clocks must be on for this operation */
if (oh->_state != _HWMOD_STATE_ENABLED) {
pr_warning("omap_hwmod: %s: reset can only be entered from "
"enabled state\n", oh->name);
return -EINVAL;
}
/* For some modules, all optionnal clocks need to be enabled as well */
if (oh->flags & HWMOD_CONTROL_OPT_CLKS_IN_RESET)
_enable_optional_clocks(oh);
pr_debug("omap_hwmod: %s: resetting via OCP SOFTRESET\n", oh->name);
v = oh->_sysc_cache;
ret = _set_softreset(oh, &v);
if (ret)
goto dis_opt_clks;
_write_sysconfig(v, oh);
if (oh->class->sysc->sysc_flags & SYSS_HAS_RESET_STATUS)
omap_test_timeout((omap_hwmod_read(oh,
oh->class->sysc->syss_offs)
& SYSS_RESETDONE_MASK),
MAX_MODULE_SOFTRESET_WAIT, c);
else if (oh->class->sysc->sysc_flags & SYSC_HAS_RESET_STATUS)
omap_test_timeout(!(omap_hwmod_read(oh,
oh->class->sysc->sysc_offs)
& SYSC_TYPE2_SOFTRESET_MASK),
MAX_MODULE_SOFTRESET_WAIT, c);
if (c == MAX_MODULE_SOFTRESET_WAIT)
pr_warning("omap_hwmod: %s: softreset failed (waited %d usec)\n",
oh->name, MAX_MODULE_SOFTRESET_WAIT);
else
pr_debug("omap_hwmod: %s: softreset in %d usec\n", oh->name, c);
/*
* XXX add _HWMOD_STATE_WEDGED for modules that don't come back from
* _wait_target_ready() or _reset()
*/
ret = (c == MAX_MODULE_SOFTRESET_WAIT) ? -ETIMEDOUT : 0;
dis_opt_clks:
if (oh->flags & HWMOD_CONTROL_OPT_CLKS_IN_RESET)
_disable_optional_clocks(oh);
return ret;
}
/**
* _reset - reset an omap_hwmod
* @oh: struct omap_hwmod *
*
* Resets an omap_hwmod @oh. The default software reset mechanism for
* most OMAP IP blocks is triggered via the OCP_SYSCONFIG.SOFTRESET
* bit. However, some hwmods cannot be reset via this method: some
* are not targets and therefore have no OCP header registers to
* access; others (like the IVA) have idiosyncratic reset sequences.
* So for these relatively rare cases, custom reset code can be
* supplied in the struct omap_hwmod_class .reset function pointer.
* Passes along the return value from either _reset() or the custom
* reset function - these must return -EINVAL if the hwmod cannot be
* reset this way or if the hwmod is in the wrong state, -ETIMEDOUT if
* the module did not reset in time, or 0 upon success.
*/
static int _reset(struct omap_hwmod *oh)
{
int ret;
pr_debug("omap_hwmod: %s: resetting\n", oh->name);
ret = (oh->class->reset) ? oh->class->reset(oh) : _ocp_softreset(oh);
return ret;
}
/**
* _enable - enable an omap_hwmod
* @oh: struct omap_hwmod *
*
* Enables an omap_hwmod @oh such that the MPU can access the hwmod's
* register target. Returns -EINVAL if the hwmod is in the wrong
* state or passes along the return value of _wait_target_ready().
*/
static int _enable(struct omap_hwmod *oh)
{
int r;
int hwsup = 0;
pr_debug("omap_hwmod: %s: enabling\n", oh->name);
if (oh->_state != _HWMOD_STATE_INITIALIZED &&
oh->_state != _HWMOD_STATE_IDLE &&
oh->_state != _HWMOD_STATE_DISABLED) {
WARN(1, "omap_hwmod: %s: enabled state can only be entered "
"from initialized, idle, or disabled state\n", oh->name);
return -EINVAL;
}
/*
* If an IP contains only one HW reset line, then de-assert it in order
* to allow the module state transition. Otherwise the PRCM will return
* Intransition status, and the init will failed.
*/
if ((oh->_state == _HWMOD_STATE_INITIALIZED ||
oh->_state == _HWMOD_STATE_DISABLED) && oh->rst_lines_cnt == 1)
_deassert_hardreset(oh, oh->rst_lines[0].name);
/* Mux pins for device runtime if populated */
if (oh->mux && (!oh->mux->enabled ||
((oh->_state == _HWMOD_STATE_IDLE) &&
oh->mux->pads_dynamic)))
omap_hwmod_mux(oh->mux, _HWMOD_STATE_ENABLED);
_add_initiator_dep(oh, mpu_oh);
if (oh->clkdm) {
/*
* A clockdomain must be in SW_SUP before enabling
* completely the module. The clockdomain can be set
* in HW_AUTO only when the module become ready.
*/
hwsup = clkdm_in_hwsup(oh->clkdm);
r = clkdm_hwmod_enable(oh->clkdm, oh);
if (r) {
WARN(1, "omap_hwmod: %s: could not enable clockdomain %s: %d\n",
oh->name, oh->clkdm->name, r);
return r;
}
}
_enable_clocks(oh);
_enable_module(oh);
r = _wait_target_ready(oh);
if (!r) {
/*
* Set the clockdomain to HW_AUTO only if the target is ready,
* assuming that the previous state was HW_AUTO
*/
if (oh->clkdm && hwsup)
clkdm_allow_idle(oh->clkdm);
oh->_state = _HWMOD_STATE_ENABLED;
/* Access the sysconfig only if the target is ready */
if (oh->class->sysc) {
if (!(oh->_int_flags & _HWMOD_SYSCONFIG_LOADED))
_update_sysc_cache(oh);
_enable_sysc(oh);
}
} else {
_disable_clocks(oh);
pr_debug("omap_hwmod: %s: _wait_target_ready: %d\n",
oh->name, r);
if (oh->clkdm)
clkdm_hwmod_disable(oh->clkdm, oh);
}
return r;
}
/**
* _idle - idle an omap_hwmod
* @oh: struct omap_hwmod *
*
* Idles an omap_hwmod @oh. This should be called once the hwmod has
* no further work. Returns -EINVAL if the hwmod is in the wrong
* state or returns 0.
*/
static int _idle(struct omap_hwmod *oh)
{
int ret;
pr_debug("omap_hwmod: %s: idling\n", oh->name);
if (oh->_state != _HWMOD_STATE_ENABLED) {
WARN(1, "omap_hwmod: %s: idle state can only be entered from "
"enabled state\n", oh->name);
return -EINVAL;
}
if (oh->class->sysc)
_idle_sysc(oh);
_del_initiator_dep(oh, mpu_oh);
_disable_module(oh);
ret = _wait_target_disable(oh);
if (ret)
pr_warn("omap_hwmod: %s: _wait_target_disable failed\n",
oh->name);
/*
* The module must be in idle mode before disabling any parents
* clocks. Otherwise, the parent clock might be disabled before
* the module transition is done, and thus will prevent the
* transition to complete properly.
*/
_disable_clocks(oh);
if (oh->clkdm)
clkdm_hwmod_disable(oh->clkdm, oh);
/* Mux pins for device idle if populated */
if (oh->mux && oh->mux->pads_dynamic)
omap_hwmod_mux(oh->mux, _HWMOD_STATE_IDLE);
oh->_state = _HWMOD_STATE_IDLE;
return 0;
}
/**
* omap_hwmod_set_ocp_autoidle - set the hwmod's OCP autoidle bit
* @oh: struct omap_hwmod *
* @autoidle: desired AUTOIDLE bitfield value (0 or 1)
*
* Sets the IP block's OCP autoidle bit in hardware, and updates our
* local copy. Intended to be used by drivers that require
* direct manipulation of the AUTOIDLE bits.
* Returns -EINVAL if @oh is null or is not in the ENABLED state, or passes
* along the return value from _set_module_autoidle().
*
* Any users of this function should be scrutinized carefully.
*/
int omap_hwmod_set_ocp_autoidle(struct omap_hwmod *oh, u8 autoidle)
{
u32 v;
int retval = 0;
unsigned long flags;
if (!oh || oh->_state != _HWMOD_STATE_ENABLED)
return -EINVAL;
spin_lock_irqsave(&oh->_lock, flags);
v = oh->_sysc_cache;
retval = _set_module_autoidle(oh, autoidle, &v);
if (!retval)
_write_sysconfig(v, oh);
spin_unlock_irqrestore(&oh->_lock, flags);
return retval;
}
/**
* _shutdown - shutdown an omap_hwmod
* @oh: struct omap_hwmod *
*
* Shut down an omap_hwmod @oh. This should be called when the driver
* used for the hwmod is removed or unloaded or if the driver is not
* used by the system. Returns -EINVAL if the hwmod is in the wrong
* state or returns 0.
*/
static int _shutdown(struct omap_hwmod *oh)
{
int ret;
u8 prev_state;
if (oh->_state != _HWMOD_STATE_IDLE &&
oh->_state != _HWMOD_STATE_ENABLED) {
WARN(1, "omap_hwmod: %s: disabled state can only be entered "
"from idle, or enabled state\n", oh->name);
return -EINVAL;
}
pr_debug("omap_hwmod: %s: disabling\n", oh->name);
if (oh->class->pre_shutdown) {
prev_state = oh->_state;
if (oh->_state == _HWMOD_STATE_IDLE)
_enable(oh);
ret = oh->class->pre_shutdown(oh);
if (ret) {
if (prev_state == _HWMOD_STATE_IDLE)
_idle(oh);
return ret;
}
}
if (oh->class->sysc) {
if (oh->_state == _HWMOD_STATE_IDLE)
_enable(oh);
_shutdown_sysc(oh);
}
/* clocks and deps are already disabled in idle */
if (oh->_state == _HWMOD_STATE_ENABLED) {
_del_initiator_dep(oh, mpu_oh);
/* XXX what about the other system initiators here? dma, dsp */
_disable_module(oh);
ret = _wait_target_disable(oh);
if (ret)
pr_warn("omap_hwmod: %s: _wait_target_disable failed\n",
oh->name);
_disable_clocks(oh);
if (oh->clkdm)
clkdm_hwmod_disable(oh->clkdm, oh);
}
/* XXX Should this code also force-disable the optional clocks? */
/*
* If an IP contains only one HW reset line, then assert it
* after disabling the clocks and before shutting down the IP.
*/
if (oh->rst_lines_cnt == 1)
_assert_hardreset(oh, oh->rst_lines[0].name);
/* Mux pins to safe mode or use populated off mode values */
if (oh->mux)
omap_hwmod_mux(oh->mux, _HWMOD_STATE_DISABLED);
oh->_state = _HWMOD_STATE_DISABLED;
return 0;
}
/**
* _setup - do initial configuration of omap_hwmod
* @oh: struct omap_hwmod *
*
* Writes the CLOCKACTIVITY bits @clockact to the hwmod @oh
* OCP_SYSCONFIG register. Returns 0.
*/
static int _setup(struct omap_hwmod *oh, void *data)
{
int i, r;
u8 postsetup_state;
if (oh->_state != _HWMOD_STATE_CLKS_INITED)
return 0;
/* Set iclk autoidle mode */
if (oh->slaves_cnt > 0) {
for (i = 0; i < oh->slaves_cnt; i++) {
struct omap_hwmod_ocp_if *os = oh->slaves[i];
struct clk *c = os->_clk;
if (!c)
continue;
if (os->flags & OCPIF_SWSUP_IDLE) {
/* XXX omap_iclk_deny_idle(c); */
} else {
/* XXX omap_iclk_allow_idle(c); */
clk_enable(c);
}
}
}
oh->_state = _HWMOD_STATE_INITIALIZED;
/*
* In the case of hwmod with hardreset that should not be
* de-assert at boot time, we have to keep the module
* initialized, because we cannot enable it properly with the
* reset asserted. Exit without warning because that behavior is
* expected.
*/
if ((oh->flags & HWMOD_INIT_NO_RESET) && oh->rst_lines_cnt == 1)
return 0;
r = _enable(oh);
if (r) {
pr_warning("omap_hwmod: %s: cannot be enabled (%d)\n",
oh->name, oh->_state);
return 0;
}
if (!(oh->flags & HWMOD_INIT_NO_RESET)) {
_reset(oh);
/*
* OCP_SYSCONFIG bits need to be reprogrammed after a softreset.
* The _enable() function should be split to
* avoid the rewrite of the OCP_SYSCONFIG register.
*/
if (oh->class->sysc) {
_update_sysc_cache(oh);
_enable_sysc(oh);
}
}
postsetup_state = oh->_postsetup_state;
if (postsetup_state == _HWMOD_STATE_UNKNOWN)
postsetup_state = _HWMOD_STATE_ENABLED;
/*
* XXX HWMOD_INIT_NO_IDLE does not belong in hwmod data -
* it should be set by the core code as a runtime flag during startup
*/
if ((oh->flags & HWMOD_INIT_NO_IDLE) &&
(postsetup_state == _HWMOD_STATE_IDLE))
postsetup_state = _HWMOD_STATE_ENABLED;
if (postsetup_state == _HWMOD_STATE_IDLE)
_idle(oh);
else if (postsetup_state == _HWMOD_STATE_DISABLED)
_shutdown(oh);
else if (postsetup_state != _HWMOD_STATE_ENABLED)
WARN(1, "hwmod: %s: unknown postsetup state %d! defaulting to enabled\n",
oh->name, postsetup_state);
return 0;
}
/**
* _register - register a struct omap_hwmod
* @oh: struct omap_hwmod *
*
* Registers the omap_hwmod @oh. Returns -EEXIST if an omap_hwmod
* already has been registered by the same name; -EINVAL if the
* omap_hwmod is in the wrong state, if @oh is NULL, if the
* omap_hwmod's class field is NULL; if the omap_hwmod is missing a
* name, or if the omap_hwmod's class is missing a name; or 0 upon
* success.
*
* XXX The data should be copied into bootmem, so the original data
* should be marked __initdata and freed after init. This would allow
* unneeded omap_hwmods to be freed on multi-OMAP configurations. Note
* that the copy process would be relatively complex due to the large number
* of substructures.
*/
static int __init _register(struct omap_hwmod *oh)
{
int ms_id;
if (!oh || !oh->name || !oh->class || !oh->class->name ||
(oh->_state != _HWMOD_STATE_UNKNOWN))
return -EINVAL;
pr_debug("omap_hwmod: %s: registering\n", oh->name);
if (_lookup(oh->name))
return -EEXIST;
ms_id = _find_mpu_port_index(oh);
if (!IS_ERR_VALUE(ms_id))
oh->_mpu_port_index = ms_id;
else
oh->_int_flags |= _HWMOD_NO_MPU_PORT;
list_add_tail(&oh->node, &omap_hwmod_list);
spin_lock_init(&oh->_lock);
oh->_state = _HWMOD_STATE_REGISTERED;
/*
* XXX Rather than doing a strcmp(), this should test a flag
* set in the hwmod data, inserted by the autogenerator code.
*/
if (!strcmp(oh->name, MPU_INITIATOR_NAME))
mpu_oh = oh;
return 0;
}
/* Public functions */
u32 omap_hwmod_read(struct omap_hwmod *oh, u16 reg_offs)
{
if (oh->flags & HWMOD_16BIT_REG)
return __raw_readw(oh->_mpu_rt_va + reg_offs);
else
return __raw_readl(oh->_mpu_rt_va + reg_offs);
}
void omap_hwmod_write(u32 v, struct omap_hwmod *oh, u16 reg_offs)
{
if (oh->flags & HWMOD_16BIT_REG)
__raw_writew(v, oh->_mpu_rt_va + reg_offs);
else
__raw_writel(v, oh->_mpu_rt_va + reg_offs);
}
/**
* omap_hwmod_softreset - reset a module via SYSCONFIG.SOFTRESET bit
* @oh: struct omap_hwmod *
*
* This is a public function exposed to drivers. Some drivers may need to do
* some settings before and after resetting the device. Those drivers after
* doing the necessary settings could use this function to start a reset by
* setting the SYSCONFIG.SOFTRESET bit.
*/
int omap_hwmod_softreset(struct omap_hwmod *oh)
{
u32 v;
int ret;
if (!oh || !(oh->_sysc_cache))
return -EINVAL;
v = oh->_sysc_cache;
ret = _set_softreset(oh, &v);
if (ret)
goto error;
_write_sysconfig(v, oh);
error:
return ret;
}
/**
* omap_hwmod_set_slave_idlemode - set the hwmod's OCP slave idlemode
* @oh: struct omap_hwmod *
* @idlemode: SIDLEMODE field bits (shifted to bit 0)
*
* Sets the IP block's OCP slave idlemode in hardware, and updates our
* local copy. Intended to be used by drivers that have some erratum
* that requires direct manipulation of the SIDLEMODE bits. Returns
* -EINVAL if @oh is null, or passes along the return value from
* _set_slave_idlemode().
*
* XXX Does this function have any current users? If not, we should
* remove it; it is better to let the rest of the hwmod code handle this.
* Any users of this function should be scrutinized carefully.
*/
int omap_hwmod_set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode)
{
u32 v;
int retval = 0;
if (!oh)
return -EINVAL;
v = oh->_sysc_cache;
retval = _set_slave_idlemode(oh, idlemode, &v);
if (!retval)
_write_sysconfig(v, oh);
return retval;
}
/**
* omap_hwmod_lookup - look up a registered omap_hwmod by name
* @name: name of the omap_hwmod to look up
*
* Given a @name of an omap_hwmod, return a pointer to the registered
* struct omap_hwmod *, or NULL upon error.
*/
struct omap_hwmod *omap_hwmod_lookup(const char *name)
{
struct omap_hwmod *oh;
if (!name)
return NULL;
oh = _lookup(name);
return oh;
}
/**
* omap_hwmod_for_each - call function for each registered omap_hwmod
* @fn: pointer to a callback function
* @data: void * data to pass to callback function
*
* Call @fn for each registered omap_hwmod, passing @data to each
* function. @fn must return 0 for success or any other value for
* failure. If @fn returns non-zero, the iteration across omap_hwmods
* will stop and the non-zero return value will be passed to the
* caller of omap_hwmod_for_each(). @fn is called with
* omap_hwmod_for_each() held.
*/
int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh, void *data),
void *data)
{
struct omap_hwmod *temp_oh;
int ret = 0;
if (!fn)
return -EINVAL;
list_for_each_entry(temp_oh, &omap_hwmod_list, node) {
ret = (*fn)(temp_oh, data);
if (ret)
break;
}
return ret;
}
/**
* omap_hwmod_register - register an array of hwmods
* @ohs: pointer to an array of omap_hwmods to register
*
* Intended to be called early in boot before the clock framework is
* initialized. If @ohs is not null, will register all omap_hwmods
* listed in @ohs that are valid for this chip. Returns 0.
*/
int __init omap_hwmod_register(struct omap_hwmod **ohs)
{
int r, i;
if (!ohs)
return 0;
i = 0;
do {
if (!omap_chip_is(ohs[i]->omap_chip))
continue;
r = _register(ohs[i]);
WARN(r, "omap_hwmod: %s: _register returned %d\n", ohs[i]->name,
r);
} while (ohs[++i]);
return 0;
}
/*
* _populate_mpu_rt_base - populate the virtual address for a hwmod
*
* Must be called only from omap_hwmod_setup_*() so ioremap works properly.
* Assumes the caller takes care of locking if needed.
*/
static int __init _populate_mpu_rt_base(struct omap_hwmod *oh, void *data)
{
if (oh->_state != _HWMOD_STATE_REGISTERED)
return 0;
if (oh->_int_flags & _HWMOD_NO_MPU_PORT)
return 0;
oh->_mpu_rt_va = _find_mpu_rt_base(oh, oh->_mpu_port_index);
return 0;
}
/**
* omap_hwmod_setup_one - set up a single hwmod
* @oh_name: const char * name of the already-registered hwmod to set up
*
* Must be called after omap2_clk_init(). Resolves the struct clk
* names to struct clk pointers for each registered omap_hwmod. Also
* calls _setup() on each hwmod. Returns -EINVAL upon error or 0 upon
* success.
*/
int __init omap_hwmod_setup_one(const char *oh_name)
{
struct omap_hwmod *oh;
int r;
pr_debug("omap_hwmod: %s: %s\n", oh_name, __func__);
if (!mpu_oh) {
pr_err("omap_hwmod: %s: cannot setup_one: MPU initiator hwmod %s not yet registered\n",
oh_name, MPU_INITIATOR_NAME);
return -EINVAL;
}
oh = _lookup(oh_name);
if (!oh) {
WARN(1, "omap_hwmod: %s: hwmod not yet registered\n", oh_name);
return -EINVAL;
}
if (mpu_oh->_state == _HWMOD_STATE_REGISTERED && oh != mpu_oh)
omap_hwmod_setup_one(MPU_INITIATOR_NAME);
r = _populate_mpu_rt_base(oh, NULL);
if (IS_ERR_VALUE(r)) {
WARN(1, "omap_hwmod: %s: couldn't set mpu_rt_base\n", oh_name);
return -EINVAL;
}
r = _init_clocks(oh, NULL);
if (IS_ERR_VALUE(r)) {
WARN(1, "omap_hwmod: %s: couldn't init clocks\n", oh_name);
return -EINVAL;
}
_setup(oh, NULL);
return 0;
}
/**
* omap_hwmod_setup - do some post-clock framework initialization
*
* Must be called after omap2_clk_init(). Resolves the struct clk names
* to struct clk pointers for each registered omap_hwmod. Also calls
* _setup() on each hwmod. Returns 0 upon success.
*/
static int __init omap_hwmod_setup_all(void)
{
int r;
if (!mpu_oh) {
pr_err("omap_hwmod: %s: MPU initiator hwmod %s not yet registered\n",
__func__, MPU_INITIATOR_NAME);
return -EINVAL;
}
r = omap_hwmod_for_each(_populate_mpu_rt_base, NULL);
r = omap_hwmod_for_each(_init_clocks, NULL);
WARN(IS_ERR_VALUE(r),
"omap_hwmod: %s: _init_clocks failed\n", __func__);
omap_hwmod_for_each(_setup, NULL);
return 0;
}
core_initcall(omap_hwmod_setup_all);
/**
* omap_hwmod_enable - enable an omap_hwmod
* @oh: struct omap_hwmod *
*
* Enable an omap_hwmod @oh. Intended to be called by omap_device_enable().
* Returns -EINVAL on error or passes along the return value from _enable().
*/
int omap_hwmod_enable(struct omap_hwmod *oh)
{
int r;
unsigned long flags;
if (!oh)
return -EINVAL;
spin_lock_irqsave(&oh->_lock, flags);
r = _enable(oh);
spin_unlock_irqrestore(&oh->_lock, flags);
return r;
}
/**
* omap_hwmod_idle - idle an omap_hwmod
* @oh: struct omap_hwmod *
*
* Idle an omap_hwmod @oh. Intended to be called by omap_device_idle().
* Returns -EINVAL on error or passes along the return value from _idle().
*/
int omap_hwmod_idle(struct omap_hwmod *oh)
{
unsigned long flags;
if (!oh)
return -EINVAL;
spin_lock_irqsave(&oh->_lock, flags);
_idle(oh);
spin_unlock_irqrestore(&oh->_lock, flags);
return 0;
}
/**
* omap_hwmod_shutdown - shutdown an omap_hwmod
* @oh: struct omap_hwmod *
*
* Shutdown an omap_hwmod @oh. Intended to be called by
* omap_device_shutdown(). Returns -EINVAL on error or passes along
* the return value from _shutdown().
*/
int omap_hwmod_shutdown(struct omap_hwmod *oh)
{
unsigned long flags;
if (!oh)
return -EINVAL;
spin_lock_irqsave(&oh->_lock, flags);
_shutdown(oh);
spin_unlock_irqrestore(&oh->_lock, flags);
return 0;
}
/**
* omap_hwmod_enable_clocks - enable main_clk, all interface clocks
* @oh: struct omap_hwmod *oh
*
* Intended to be called by the omap_device code.
*/
int omap_hwmod_enable_clocks(struct omap_hwmod *oh)
{
unsigned long flags;
spin_lock_irqsave(&oh->_lock, flags);
_enable_clocks(oh);
spin_unlock_irqrestore(&oh->_lock, flags);
return 0;
}
/**
* omap_hwmod_disable_clocks - disable main_clk, all interface clocks
* @oh: struct omap_hwmod *oh
*
* Intended to be called by the omap_device code.
*/
int omap_hwmod_disable_clocks(struct omap_hwmod *oh)
{
unsigned long flags;
spin_lock_irqsave(&oh->_lock, flags);
_disable_clocks(oh);
spin_unlock_irqrestore(&oh->_lock, flags);
return 0;
}
/**
* omap_hwmod_ocp_barrier - wait for posted writes against the hwmod to complete
* @oh: struct omap_hwmod *oh
*
* Intended to be called by drivers and core code when all posted
* writes to a device must complete before continuing further
* execution (for example, after clearing some device IRQSTATUS
* register bits)
*
* XXX what about targets with multiple OCP threads?
*/
void omap_hwmod_ocp_barrier(struct omap_hwmod *oh)
{
BUG_ON(!oh);
if (!oh->class->sysc || !oh->class->sysc->sysc_flags) {
WARN(1, "omap_device: %s: OCP barrier impossible due to "
"device configuration\n", oh->name);
return;
}
/*
* Forces posted writes to complete on the OCP thread handling
* register writes
*/
omap_hwmod_read(oh, oh->class->sysc->sysc_offs);
}
/**
* omap_hwmod_reset - reset the hwmod
* @oh: struct omap_hwmod *
*
* Under some conditions, a driver may wish to reset the entire device.
* Called from omap_device code. Returns -EINVAL on error or passes along
* the return value from _reset().
*/
int omap_hwmod_reset(struct omap_hwmod *oh)
{
int r;
unsigned long flags;
if (!oh)
return -EINVAL;
spin_lock_irqsave(&oh->_lock, flags);
r = _reset(oh);
spin_unlock_irqrestore(&oh->_lock, flags);
return r;
}
/**
* omap_hwmod_count_resources - count number of struct resources needed by hwmod
* @oh: struct omap_hwmod *
* @res: pointer to the first element of an array of struct resource to fill
*
* Count the number of struct resource array elements necessary to
* contain omap_hwmod @oh resources. Intended to be called by code
* that registers omap_devices. Intended to be used to determine the
* size of a dynamically-allocated struct resource array, before
* calling omap_hwmod_fill_resources(). Returns the number of struct
* resource array elements needed.
*
* XXX This code is not optimized. It could attempt to merge adjacent
* resource IDs.
*
*/
int omap_hwmod_count_resources(struct omap_hwmod *oh)
{
int ret, i;
ret = _count_mpu_irqs(oh) + _count_sdma_reqs(oh);
for (i = 0; i < oh->slaves_cnt; i++)
ret += _count_ocp_if_addr_spaces(oh->slaves[i]);
return ret;
}
/**
* omap_hwmod_fill_resources - fill struct resource array with hwmod data
* @oh: struct omap_hwmod *
* @res: pointer to the first element of an array of struct resource to fill
*
* Fill the struct resource array @res with resource data from the
* omap_hwmod @oh. Intended to be called by code that registers
* omap_devices. See also omap_hwmod_count_resources(). Returns the
* number of array elements filled.
*/
int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res)
{
int i, j, mpu_irqs_cnt, sdma_reqs_cnt;
int r = 0;
/* For each IRQ, DMA, memory area, fill in array.*/
mpu_irqs_cnt = _count_mpu_irqs(oh);
for (i = 0; i < mpu_irqs_cnt; i++) {
(res + r)->name = (oh->mpu_irqs + i)->name;
(res + r)->start = (oh->mpu_irqs + i)->irq;
(res + r)->end = (oh->mpu_irqs + i)->irq;
(res + r)->flags = IORESOURCE_IRQ;
r++;
}
sdma_reqs_cnt = _count_sdma_reqs(oh);
for (i = 0; i < sdma_reqs_cnt; i++) {
(res + r)->name = (oh->sdma_reqs + i)->name;
(res + r)->start = (oh->sdma_reqs + i)->dma_req;
(res + r)->end = (oh->sdma_reqs + i)->dma_req;
(res + r)->flags = IORESOURCE_DMA;
r++;
}
for (i = 0; i < oh->slaves_cnt; i++) {
struct omap_hwmod_ocp_if *os;
int addr_cnt;
os = oh->slaves[i];
addr_cnt = _count_ocp_if_addr_spaces(os);
for (j = 0; j < addr_cnt; j++) {
(res + r)->name = (os->addr + j)->name;
(res + r)->start = (os->addr + j)->pa_start;
(res + r)->end = (os->addr + j)->pa_end;
(res + r)->flags = IORESOURCE_MEM;
r++;
}
}
return r;
}
/**
* omap_hwmod_get_pwrdm - return pointer to this module's main powerdomain
* @oh: struct omap_hwmod *
*
* Return the powerdomain pointer associated with the OMAP module
* @oh's main clock. If @oh does not have a main clk, return the
* powerdomain associated with the interface clock associated with the
* module's MPU port. (XXX Perhaps this should use the SDMA port
* instead?) Returns NULL on error, or a struct powerdomain * on
* success.
*/
struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh)
{
struct clk *c;
if (!oh)
return NULL;
if (oh->_clk) {
c = oh->_clk;
} else {
if (oh->_int_flags & _HWMOD_NO_MPU_PORT)
return NULL;
c = oh->slaves[oh->_mpu_port_index]->_clk;
}
if (!c->clkdm)
return NULL;
return c->clkdm->pwrdm.ptr;
}
/**
* omap_hwmod_get_mpu_rt_va - return the module's base address (for the MPU)
* @oh: struct omap_hwmod *
*
* Returns the virtual address corresponding to the beginning of the
* module's register target, in the address range that is intended to
* be used by the MPU. Returns the virtual address upon success or NULL
* upon error.
*/
void __iomem *omap_hwmod_get_mpu_rt_va(struct omap_hwmod *oh)
{
if (!oh)
return NULL;
if (oh->_int_flags & _HWMOD_NO_MPU_PORT)
return NULL;
if (oh->_state == _HWMOD_STATE_UNKNOWN)
return NULL;
return oh->_mpu_rt_va;
}
/**
* omap_hwmod_add_initiator_dep - add sleepdep from @init_oh to @oh
* @oh: struct omap_hwmod *
* @init_oh: struct omap_hwmod * (initiator)
*
* Add a sleep dependency between the initiator @init_oh and @oh.
* Intended to be called by DSP/Bridge code via platform_data for the
* DSP case; and by the DMA code in the sDMA case. DMA code, *Bridge
* code needs to add/del initiator dependencies dynamically
* before/after accessing a device. Returns the return value from
* _add_initiator_dep().
*
* XXX Keep a usecount in the clockdomain code
*/
int omap_hwmod_add_initiator_dep(struct omap_hwmod *oh,
struct omap_hwmod *init_oh)
{
return _add_initiator_dep(oh, init_oh);
}
/*
* XXX what about functions for drivers to save/restore ocp_sysconfig
* for context save/restore operations?
*/
/**
* omap_hwmod_del_initiator_dep - remove sleepdep from @init_oh to @oh
* @oh: struct omap_hwmod *
* @init_oh: struct omap_hwmod * (initiator)
*
* Remove a sleep dependency between the initiator @init_oh and @oh.
* Intended to be called by DSP/Bridge code via platform_data for the
* DSP case; and by the DMA code in the sDMA case. DMA code, *Bridge
* code needs to add/del initiator dependencies dynamically
* before/after accessing a device. Returns the return value from
* _del_initiator_dep().
*
* XXX Keep a usecount in the clockdomain code
*/
int omap_hwmod_del_initiator_dep(struct omap_hwmod *oh,
struct omap_hwmod *init_oh)
{
return _del_initiator_dep(oh, init_oh);
}
/**
* omap_hwmod_enable_wakeup - allow device to wake up the system
* @oh: struct omap_hwmod *
*
* Sets the module OCP socket ENAWAKEUP bit to allow the module to
* send wakeups to the PRCM. Eventually this should sets PRCM wakeup
* registers to cause the PRCM to receive wakeup events from the
* module. Does not set any wakeup routing registers beyond this
* point - if the module is to wake up any other module or subsystem,
* that must be set separately. Called by omap_device code. Returns
* -EINVAL on error or 0 upon success.
*/
int omap_hwmod_enable_wakeup(struct omap_hwmod *oh)
{
unsigned long flags;
u32 v;
if (!oh->class->sysc ||
!(oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP))
return -EINVAL;
spin_lock_irqsave(&oh->_lock, flags);
v = oh->_sysc_cache;
_enable_wakeup(oh, &v);
_write_sysconfig(v, oh);
spin_unlock_irqrestore(&oh->_lock, flags);
return 0;
}
/**
* omap_hwmod_disable_wakeup - prevent device from waking the system
* @oh: struct omap_hwmod *
*
* Clears the module OCP socket ENAWAKEUP bit to prevent the module
* from sending wakeups to the PRCM. Eventually this should clear
* PRCM wakeup registers to cause the PRCM to ignore wakeup events
* from the module. Does not set any wakeup routing registers beyond
* this point - if the module is to wake up any other module or
* subsystem, that must be set separately. Called by omap_device
* code. Returns -EINVAL on error or 0 upon success.
*/
int omap_hwmod_disable_wakeup(struct omap_hwmod *oh)
{
unsigned long flags;
u32 v;
if (!oh->class->sysc ||
!(oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP))
return -EINVAL;
spin_lock_irqsave(&oh->_lock, flags);
v = oh->_sysc_cache;
_disable_wakeup(oh, &v);
_write_sysconfig(v, oh);
spin_unlock_irqrestore(&oh->_lock, flags);
return 0;
}
/**
* omap_hwmod_assert_hardreset - assert the HW reset line of submodules
* contained in the hwmod module.
* @oh: struct omap_hwmod *
* @name: name of the reset line to lookup and assert
*
* Some IP like dsp, ipu or iva contain processor that require
* an HW reset line to be assert / deassert in order to enable fully
* the IP. Returns -EINVAL if @oh is null or if the operation is not
* yet supported on this OMAP; otherwise, passes along the return value
* from _assert_hardreset().
*/
int omap_hwmod_assert_hardreset(struct omap_hwmod *oh, const char *name)
{
int ret;
unsigned long flags;
if (!oh)
return -EINVAL;
spin_lock_irqsave(&oh->_lock, flags);
ret = _assert_hardreset(oh, name);
spin_unlock_irqrestore(&oh->_lock, flags);
return ret;
}
/**
* omap_hwmod_deassert_hardreset - deassert the HW reset line of submodules
* contained in the hwmod module.
* @oh: struct omap_hwmod *
* @name: name of the reset line to look up and deassert
*
* Some IP like dsp, ipu or iva contain processor that require
* an HW reset line to be assert / deassert in order to enable fully
* the IP. Returns -EINVAL if @oh is null or if the operation is not
* yet supported on this OMAP; otherwise, passes along the return value
* from _deassert_hardreset().
*/
int omap_hwmod_deassert_hardreset(struct omap_hwmod *oh, const char *name)
{
int ret;
unsigned long flags;
if (!oh)
return -EINVAL;
spin_lock_irqsave(&oh->_lock, flags);
ret = _deassert_hardreset(oh, name);
spin_unlock_irqrestore(&oh->_lock, flags);
return ret;
}
/**
* omap_hwmod_read_hardreset - read the HW reset line state of submodules
* contained in the hwmod module
* @oh: struct omap_hwmod *
* @name: name of the reset line to look up and read
*
* Return the current state of the hwmod @oh's reset line named @name:
* returns -EINVAL upon parameter error or if this operation
* is unsupported on the current OMAP; otherwise, passes along the return
* value from _read_hardreset().
*/
int omap_hwmod_read_hardreset(struct omap_hwmod *oh, const char *name)
{
int ret;
unsigned long flags;
if (!oh)
return -EINVAL;
spin_lock_irqsave(&oh->_lock, flags);
ret = _read_hardreset(oh, name);
spin_unlock_irqrestore(&oh->_lock, flags);
return ret;
}
/**
* omap_hwmod_for_each_by_class - call @fn for each hwmod of class @classname
* @classname: struct omap_hwmod_class name to search for
* @fn: callback function pointer to call for each hwmod in class @classname
* @user: arbitrary context data to pass to the callback function
*
* For each omap_hwmod of class @classname, call @fn.
* If the callback function returns something other than
* zero, the iterator is terminated, and the callback function's return
* value is passed back to the caller. Returns 0 upon success, -EINVAL
* if @classname or @fn are NULL, or passes back the error code from @fn.
*/
int omap_hwmod_for_each_by_class(const char *classname,
int (*fn)(struct omap_hwmod *oh,
void *user),
void *user)
{
struct omap_hwmod *temp_oh;
int ret = 0;
if (!classname || !fn)
return -EINVAL;
pr_debug("omap_hwmod: %s: looking for modules of class %s\n",
__func__, classname);
list_for_each_entry(temp_oh, &omap_hwmod_list, node) {
if (!strcmp(temp_oh->class->name, classname)) {
pr_debug("omap_hwmod: %s: %s: calling callback fn\n",
__func__, temp_oh->name);
ret = (*fn)(temp_oh, user);
if (ret)
break;
}
}
if (ret)
pr_debug("omap_hwmod: %s: iterator terminated early: %d\n",
__func__, ret);
return ret;
}
/**
* omap_hwmod_set_postsetup_state - set the post-_setup() state for this hwmod
* @oh: struct omap_hwmod *
* @state: state that _setup() should leave the hwmod in
*
* Sets the hwmod state that @oh will enter at the end of _setup()
* (called by omap_hwmod_setup_*()). Only valid to call between
* calling omap_hwmod_register() and omap_hwmod_setup_*(). Returns
* 0 upon success or -EINVAL if there is a problem with the arguments
* or if the hwmod is in the wrong state.
*/
int omap_hwmod_set_postsetup_state(struct omap_hwmod *oh, u8 state)
{
int ret;
unsigned long flags;
if (!oh)
return -EINVAL;
if (state != _HWMOD_STATE_DISABLED &&
state != _HWMOD_STATE_ENABLED &&
state != _HWMOD_STATE_IDLE)
return -EINVAL;
spin_lock_irqsave(&oh->_lock, flags);
if (oh->_state != _HWMOD_STATE_REGISTERED) {
ret = -EINVAL;
goto ohsps_unlock;
}
oh->_postsetup_state = state;
ret = 0;
ohsps_unlock:
spin_unlock_irqrestore(&oh->_lock, flags);
return ret;
}
/**
* omap_hwmod_get_context_loss_count - get lost context count
* @oh: struct omap_hwmod *
*
* Query the powerdomain of of @oh to get the context loss
* count for this device.
*
* Returns the context loss count of the powerdomain assocated with @oh
* upon success, or zero if no powerdomain exists for @oh.
*/
u32 omap_hwmod_get_context_loss_count(struct omap_hwmod *oh)
{
struct powerdomain *pwrdm;
int ret = 0;
pwrdm = omap_hwmod_get_pwrdm(oh);
if (pwrdm)
ret = pwrdm_get_context_loss_count(pwrdm);
return ret;
}
/**
* omap_hwmod_no_setup_reset - prevent a hwmod from being reset upon setup
* @oh: struct omap_hwmod *
*
* Prevent the hwmod @oh from being reset during the setup process.
* Intended for use by board-*.c files on boards with devices that
* cannot tolerate being reset. Must be called before the hwmod has
* been set up. Returns 0 upon success or negative error code upon
* failure.
*/
int omap_hwmod_no_setup_reset(struct omap_hwmod *oh)
{
if (!oh)
return -EINVAL;
if (oh->_state != _HWMOD_STATE_REGISTERED) {
pr_err("omap_hwmod: %s: cannot prevent setup reset; in wrong state\n",
oh->name);
return -EINVAL;
}
oh->flags |= HWMOD_INIT_NO_RESET;
return 0;
}