Merge tag 'mmc-v5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC host fixes from Ulf Hansson:
- sdhci: Fix performance regression with auto CMD auto select
- sdhci-of-esdhc: Fix initialization for eMMC HS400 mode
- sdhci-of-esdhc: Fix timeout bug for tuning commands
* tag 'mmc-v5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-of-esdhc: make sure delay chain locked for HS400
mmc: sdhci-of-esdhc: set timeout to max before tuning
mmc: sdhci: Use Auto CMD Auto Select only when v4_mode is true
diff --git a/drivers/mmc/host/sdhci-esdhc.h b/drivers/mmc/host/sdhci-esdhc.h
index a30796e..6de02f0 100644
--- a/drivers/mmc/host/sdhci-esdhc.h
+++ b/drivers/mmc/host/sdhci-esdhc.h
@@ -5,6 +5,7 @@
* Copyright (c) 2007 Freescale Semiconductor, Inc.
* Copyright (c) 2009 MontaVista Software, Inc.
* Copyright (c) 2010 Pengutronix e.K.
+ * Copyright 2020 NXP
* Author: Wolfram Sang <kernel@pengutronix.de>
*/
@@ -88,6 +89,7 @@
/* DLL Config 0 Register */
#define ESDHC_DLLCFG0 0x160
#define ESDHC_DLL_ENABLE 0x80000000
+#define ESDHC_DLL_RESET 0x40000000
#define ESDHC_DLL_FREQ_SEL 0x08000000
/* DLL Config 1 Register */
diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c
index 0b45eff..bb09445 100644
--- a/drivers/mmc/host/sdhci-of-esdhc.c
+++ b/drivers/mmc/host/sdhci-of-esdhc.c
@@ -4,6 +4,7 @@
*
* Copyright (c) 2007, 2010, 2012 Freescale Semiconductor, Inc.
* Copyright (c) 2009 MontaVista Software, Inc.
+ * Copyright 2020 NXP
*
* Authors: Xiaobo Xie <X.Xie@freescale.com>
* Anton Vorontsov <avorontsov@ru.mvista.com>
@@ -19,6 +20,7 @@
#include <linux/clk.h>
#include <linux/ktime.h>
#include <linux/dma-mapping.h>
+#include <linux/iopoll.h>
#include <linux/mmc/host.h>
#include <linux/mmc/mmc.h>
#include "sdhci-pltfm.h"
@@ -743,6 +745,21 @@
if (host->mmc->actual_clock == MMC_HS200_MAX_DTR)
temp |= ESDHC_DLL_FREQ_SEL;
sdhci_writel(host, temp, ESDHC_DLLCFG0);
+
+ temp |= ESDHC_DLL_RESET;
+ sdhci_writel(host, temp, ESDHC_DLLCFG0);
+ udelay(1);
+ temp &= ~ESDHC_DLL_RESET;
+ sdhci_writel(host, temp, ESDHC_DLLCFG0);
+
+ /* Wait max 20 ms */
+ if (read_poll_timeout(sdhci_readl, temp,
+ temp & ESDHC_DLL_STS_SLV_LOCK,
+ 10, 20000, false,
+ host, ESDHC_DLLSTAT0))
+ pr_err("%s: timeout for delay chain lock.\n",
+ mmc_hostname(host->mmc));
+
temp = sdhci_readl(host, ESDHC_TBCTL);
sdhci_writel(host, temp | ESDHC_HS400_WNDW_ADJUST, ESDHC_TBCTL);
@@ -1052,6 +1069,17 @@
esdhc_tuning_block_enable(host, true);
+ /*
+ * The eSDHC controller takes the data timeout value into account
+ * during tuning. If the SD card is too slow sending the response, the
+ * timer will expire and a "Buffer Read Ready" interrupt without data
+ * is triggered. This leads to tuning errors.
+ *
+ * Just set the timeout to the maximum value because the core will
+ * already take care of it in sdhci_send_tuning().
+ */
+ sdhci_writeb(host, 0xe, SDHCI_TIMEOUT_CONTROL);
+
hs400_tuning = host->flags & SDHCI_HS400_TUNING;
do {
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 592a55a..3561ae8 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1384,9 +1384,11 @@
/*
* In case of Version 4.10 or later, use of 'Auto CMD Auto
* Select' is recommended rather than use of 'Auto CMD12
- * Enable' or 'Auto CMD23 Enable'.
+ * Enable' or 'Auto CMD23 Enable'. We require Version 4 Mode
+ * here because some controllers (e.g sdhci-of-dwmshc) expect it.
*/
- if (host->version >= SDHCI_SPEC_410 && (use_cmd12 || use_cmd23)) {
+ if (host->version >= SDHCI_SPEC_410 && host->v4_mode &&
+ (use_cmd12 || use_cmd23)) {
*mode |= SDHCI_TRNS_AUTO_SEL;
ctrl2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
