Merge tag 'arm-newsoc-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull new ARM SoC support from Arnd Bergmann:
"There are three SoC families newly dded to the 32-bit and 64-bit Arm
architecture code in the kernel this time:
- Daniel Palmer adds initial support for two chips made by MStar, a
taiwanese SoC manufacturer that became part of Mediatek in 2012.
For now, the added support is fairly minimal, with just two of its
Cortex-A7 based 32-bit camera chips getting support for a limited
set of on-chip peripherals.
- Lars Povlsen from Microchip adds support for their new Sparx5
family of ethernet switch chips using 64-bit Cortex-A53 cores.
These are descended from earlier VSC7xxx SparX and Ocelot chips
using 32-bit MIPS cores.
- Daniele Alessandrelli from Intel adds support for the new Keem Bay
SoC for computer vision, built around a Movidius VPU with Linux
running on Arm Cortex-A53 cores"
* tag 'arm-newsoc-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (38 commits)
ARM: mstar: Correct the compatible string for pmsleep
dt-bindings: arm: mstar: remove the binding description for mstar,pmsleep
dt-bindings: mfd: syscon: add compatible string for mstar,msc313-pmsleep
ARM: mstar: Add reboot support
ARM: mstar: Add "pmsleep" node to base dtsi
ARM: mstar: Add PMU
ARM: mstar: Adjust IMI size for infinity3
ARM: mstar: Adjust IMI size for mercury5
ARM: mstar: Adjust IMI size of infinity
ARM: mstar: Add IMI SRAM region
dt-bindings: arm: mstar: Move existing MStar binding descriptions
dt-bindings: arm: mstar: Add binding details for mstar, pmsleep
ARM: mstar: Fix dts filename for 70mai midrive d08
ARM: mstar: Add dts for 70mai midrive d08
ARM: mstar: Add dts for msc313(e) based BreadBee boards
ARM: mstar: Add mercury5 series dtsis
ARM: mstar: Add infinity/infinity3 family dtsis
ARM: mstar: Add Armv7 base dtsi
ARM: mstar: Add binding details for mstar,l3bridge
ARM: mstar: Add machine for MStar/Sigmastar Armv7 SoCs
...
diff --git a/Documentation/devicetree/bindings/arm/intel,keembay.yaml b/Documentation/devicetree/bindings/arm/intel,keembay.yaml
new file mode 100644
index 0000000..4d92578
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/intel,keembay.yaml
@@ -0,0 +1,19 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/intel,keembay.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Keem Bay platform device tree bindings
+
+maintainers:
+ - Paul J. Murphy <paul.j.murphy@intel.com>
+ - Daniele Alessandrelli <daniele.alessandrelli@intel.com>
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - intel,keembay-evm
+ - const: intel,keembay
+...
diff --git a/Documentation/devicetree/bindings/arm/microchip,sparx5.yaml b/Documentation/devicetree/bindings/arm/microchip,sparx5.yaml
new file mode 100644
index 0000000..ecf6fa1
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/microchip,sparx5.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/microchip,sparx5.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Sparx5 Boards Device Tree Bindings
+
+maintainers:
+ - Lars Povlsen <lars.povlsen@microchip.com>
+
+description: |+
+ The Microchip Sparx5 SoC is a ARMv8-based used in a family of
+ gigabit TSN-capable gigabit switches.
+
+ The SparX-5 Ethernet switch family provides a rich set of switching
+ features such as advanced TCAM-based VLAN and QoS processing
+ enabling delivery of differentiated services, and security through
+ TCAM-based frame processing using versatile content aware processor
+ (VCAP)
+
+properties:
+ $nodename:
+ const: '/'
+ compatible:
+ oneOf:
+ - description: The Sparx5 pcb125 board is a modular board,
+ which has both spi-nor and eMMC storage. The modular design
+ allows for connection of different network ports.
+ items:
+ - const: microchip,sparx5-pcb125
+ - const: microchip,sparx5
+
+ - description: The Sparx5 pcb134 is a pizzabox form factor
+ gigabit switch with 20 SFP ports. It features spi-nor and
+ either spi-nand or eMMC storage (mount option).
+ items:
+ - const: microchip,sparx5-pcb134
+ - const: microchip,sparx5
+
+ - description: The Sparx5 pcb135 is a pizzabox form factor
+ gigabit switch with 48+4 Cu ports. It features spi-nor and
+ either spi-nand or eMMC storage (mount option).
+ items:
+ - const: microchip,sparx5-pcb135
+ - const: microchip,sparx5
+
+ axi@600000000:
+ type: object
+ description: the root node in the Sparx5 platforms must contain
+ an axi bus child node. They are always at physical address
+ 0x600000000 in all the Sparx5 variants.
+ properties:
+ compatible:
+ items:
+ - const: simple-bus
+
+ required:
+ - compatible
+
+required:
+ - compatible
+ - axi@600000000
+
+...
diff --git a/Documentation/devicetree/bindings/arm/mstar/mstar,l3bridge.yaml b/Documentation/devicetree/bindings/arm/mstar/mstar,l3bridge.yaml
new file mode 100644
index 0000000..6816bd6
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mstar/mstar,l3bridge.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2020 thingy.jp.
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/arm/mstar/mstar,l3bridge.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: MStar/SigmaStar Armv7 SoC l3bridge
+
+maintainers:
+ - Daniel Palmer <daniel@thingy.jp>
+
+description: |
+ MStar/SigmaStar's Armv7 SoCs have a pipeline in the interface
+ between the CPU and memory. This means that before DMA capable
+ devices are allowed to run the pipeline must be flushed to ensure
+ everything is in memory.
+
+ The l3bridge region contains registers that allow such a flush
+ to be triggered.
+
+ This node is used by the platform code to find where the registers
+ are and install a barrier that triggers the required pipeline flush.
+
+properties:
+ compatible:
+ items:
+ - const: mstar,l3bridge
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ l3bridge: l3bridge@1f204400 {
+ compatible = "mstar,l3bridge";
+ reg = <0x1f204400 0x200>;
+ };
diff --git a/Documentation/devicetree/bindings/arm/mstar/mstar.yaml b/Documentation/devicetree/bindings/arm/mstar/mstar.yaml
new file mode 100644
index 0000000..c2f980b
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mstar/mstar.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/mstar/mstar.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MStar platforms device tree bindings
+
+maintainers:
+ - Daniel Palmer <daniel@thingy.jp>
+
+properties:
+ $nodename:
+ const: '/'
+ compatible:
+ oneOf:
+ - description: infinity boards
+ items:
+ - enum:
+ - thingyjp,breadbee-crust # thingy.jp BreadBee Crust
+ - const: mstar,infinity
+
+ - description: infinity3 boards
+ items:
+ - enum:
+ - thingyjp,breadbee # thingy.jp BreadBee
+ - const: mstar,infinity3
+
+ - description: mercury5 boards
+ items:
+ - enum:
+ - 70mai,midrived08 # 70mai midrive d08
+ - const: mstar,mercury5
diff --git a/Documentation/devicetree/bindings/clock/microchip,sparx5-dpll.yaml b/Documentation/devicetree/bindings/clock/microchip,sparx5-dpll.yaml
new file mode 100644
index 0000000..39559a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/microchip,sparx5-dpll.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/microchip,sparx5-dpll.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Sparx5 DPLL Clock
+
+maintainers:
+ - Lars Povlsen <lars.povlsen@microchip.com>
+
+description: |
+ The Sparx5 DPLL clock controller generates and supplies clock to
+ various peripherals within the SoC.
+
+properties:
+ compatible:
+ const: microchip,sparx5-dpll
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ # Clock provider for eMMC:
+ - |
+ lcpll_clk: lcpll-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <2500000000>;
+ };
+ clks: clock-controller@61110000c {
+ compatible = "microchip,sparx5-dpll";
+ #clock-cells = <1>;
+ clocks = <&lcpll_clk>;
+ reg = <0x1110000c 0x24>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/mfd/syscon.yaml b/Documentation/devicetree/bindings/mfd/syscon.yaml
index 19bdaf7..614e58b 100644
--- a/Documentation/devicetree/bindings/mfd/syscon.yaml
+++ b/Documentation/devicetree/bindings/mfd/syscon.yaml
@@ -38,6 +38,8 @@
- allwinner,sun8i-h3-system-controller
- allwinner,sun8i-v3s-system-controller
- allwinner,sun50i-a64-system-controller
+ - microchip,sparx5-cpu-syscon
+ - mstar,msc313-pmsleep
- const: syscon
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 9f7af78d..60add08 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -23,6 +23,8 @@
"^(simple-audio-card|simple-graph-card|st-plgpio|st-spics|ts),.*": true
# Keep list in alphabetical order.
+ "^70mai,.*":
+ description: 70mai Co., Ltd.
"^abilis,.*":
description: Abilis Systems
"^abracon,.*":
@@ -682,6 +684,8 @@
description: Microsemi Corporation
"^msi,.*":
description: Micro-Star International Co. Ltd.
+ "^mstar,.*":
+ description: MStar Semiconductor, Inc. (acquired by MediaTek Inc.)
"^mti,.*":
description: Imagination Technologies Ltd. (formerly MIPS Technologies Inc.)
"^multi-inno,.*":
@@ -986,6 +990,8 @@
description: Spreadtrum Communications Inc.
"^sst,.*":
description: Silicon Storage Technology, Inc.
+ "^sstar,.*":
+ description: Xiamen Xingchen(SigmaStar) Technology Co., Ltd. (formerly part of MStar Semiconductor, Inc.)
"^st,.*":
description: STMicroelectronics
"^starry,.*":
@@ -1034,6 +1040,8 @@
description: Three Five Corp
"^thine,.*":
description: THine Electronics, Inc.
+ "^thingyjp,.*":
+ description: thingy.jp
"^ti,.*":
description: Texas Instruments
"^tianma,.*":
diff --git a/MAINTAINERS b/MAINTAINERS
index 4ef80ba..54885f5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1966,6 +1966,14 @@
F: include/linux/irqchip/irq-ixp4xx.h
F: include/linux/platform_data/timer-ixp4xx.h
+ARM/INTEL KEEMBAY ARCHITECTURE
+M: Paul J. Murphy <paul.j.murphy@intel.com>
+M: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
+S: Maintained
+F: Documentation/devicetree/bindings/arm/intel,keembay.yaml
+F: arch/arm64/boot/dts/intel/keembay-evm.dts
+F: arch/arm64/boot/dts/intel/keembay-soc.dtsi
+
ARM/INTEL RESEARCH IMOTE/STARGATE 2 MACHINE SUPPORT
M: Jonathan Cameron <jic23@cam.ac.uk>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -2123,12 +2131,32 @@
N: at91
N: atmel
+ARM/Microchip Sparx5 SoC support
+M: Lars Povlsen <lars.povlsen@microchip.com>
+M: Steen Hegelund <Steen.Hegelund@microchip.com>
+M: Microchip Linux Driver Support <UNGLinuxDriver@microchip.com>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Supported
+F: arch/arm64/boot/dts/microchip/
+N: sparx5
+
ARM/MIOA701 MACHINE SUPPORT
M: Robert Jarzmik <robert.jarzmik@free.fr>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-pxa/mioa701.c
+ARM/MStar/Sigmastar Armv7 SoC support
+M: Daniel Palmer <daniel@thingy.jp>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Maintained
+W: http://linux-chenxing.org/
+F: Documentation/devicetree/bindings/arm/mstar/*
+F: arch/arm/boot/dts/infinity*.dtsi
+F: arch/arm/boot/dts/mercury*.dtsi
+F: arch/arm/boot/dts/mstar-v7.dtsi
+F: arch/arm/mach-mstar/
+
ARM/NEC MOBILEPRO 900/c MACHINE SUPPORT
M: Michael Petchkovsky <mkpetch@internode.on.net>
S: Maintained
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 2ac7490..d54c413 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -668,6 +668,8 @@
source "arch/arm/mach-moxart/Kconfig"
+source "arch/arm/mach-mstar/Kconfig"
+
source "arch/arm/mach-mv78xx0/Kconfig"
source "arch/arm/mach-mvebu/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 59fde2d..e7f4ca0 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -197,6 +197,7 @@
machine-$(CONFIG_ARCH_MEDIATEK) += mediatek
machine-$(CONFIG_ARCH_MILBEAUT) += milbeaut
machine-$(CONFIG_ARCH_MXS) += mxs
+machine-$(CONFIG_ARCH_MSTARV7) += mstar
machine-$(CONFIG_ARCH_NOMADIK) += nomadik
machine-$(CONFIG_ARCH_NPCM) += npcm
machine-$(CONFIG_ARCH_NSPIRE) += nspire
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 8fa6b4be..4572db3f 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1355,6 +1355,10 @@
mt8127-moose.dtb \
mt8135-evbp1.dtb
dtb-$(CONFIG_ARCH_MILBEAUT) += milbeaut-m10v-evb.dtb
+dtb-$(CONFIG_ARCH_MSTARV7) += \
+ infinity-msc313-breadbee_crust.dtb \
+ infinity3-msc313e-breadbee.dtb \
+ mercury5-ssc8336n-midrived08.dtb
dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-ast2500-evb.dtb \
diff --git a/arch/arm/boot/dts/infinity-msc313-breadbee_crust.dts b/arch/arm/boot/dts/infinity-msc313-breadbee_crust.dts
new file mode 100644
index 0000000..f24c558
--- /dev/null
+++ b/arch/arm/boot/dts/infinity-msc313-breadbee_crust.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 thingy.jp.
+ * Author: Daniel Palmer <daniel@thingy.jp>
+ */
+
+/dts-v1/;
+#include "infinity-msc313.dtsi"
+
+/ {
+ model = "BreadBee Crust";
+ compatible = "thingyjp,breadbee-crust", "mstar,infinity";
+
+ aliases {
+ serial0 = &pm_uart;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&pm_uart {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/infinity-msc313.dtsi b/arch/arm/boot/dts/infinity-msc313.dtsi
new file mode 100644
index 0000000..42f2b555
--- /dev/null
+++ b/arch/arm/boot/dts/infinity-msc313.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2020 thingy.jp.
+ * Author: Daniel Palmer <daniel@thingy.jp>
+ */
+
+#include "infinity.dtsi"
+
+/ {
+ memory@20000000 {
+ device_type = "memory";
+ reg = <0x20000000 0x4000000>;
+ };
+};
diff --git a/arch/arm/boot/dts/infinity.dtsi b/arch/arm/boot/dts/infinity.dtsi
new file mode 100644
index 0000000..cd911ad
--- /dev/null
+++ b/arch/arm/boot/dts/infinity.dtsi
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2020 thingy.jp.
+ * Author: Daniel Palmer <daniel@thingy.jp>
+ */
+
+#include "mstar-v7.dtsi"
+
+&imi {
+ reg = <0xa0000000 0x16000>;
+};
diff --git a/arch/arm/boot/dts/infinity3-msc313e-breadbee.dts b/arch/arm/boot/dts/infinity3-msc313e-breadbee.dts
new file mode 100644
index 0000000..1f93401
--- /dev/null
+++ b/arch/arm/boot/dts/infinity3-msc313e-breadbee.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 thingy.jp.
+ * Author: Daniel Palmer <daniel@thingy.jp>
+ */
+
+/dts-v1/;
+#include "infinity3-msc313e.dtsi"
+
+/ {
+ model = "BreadBee";
+ compatible = "thingyjp,breadbee", "mstar,infinity3";
+
+ aliases {
+ serial0 = &pm_uart;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&pm_uart {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/infinity3-msc313e.dtsi b/arch/arm/boot/dts/infinity3-msc313e.dtsi
new file mode 100644
index 0000000..4e7239a
--- /dev/null
+++ b/arch/arm/boot/dts/infinity3-msc313e.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2020 thingy.jp.
+ * Author: Daniel Palmer <daniel@thingy.jp>
+ */
+
+#include "infinity3.dtsi"
+
+/ {
+ memory@20000000 {
+ device_type = "memory";
+ reg = <0x20000000 0x4000000>;
+ };
+};
diff --git a/arch/arm/boot/dts/infinity3.dtsi b/arch/arm/boot/dts/infinity3.dtsi
new file mode 100644
index 0000000..9b918c8
--- /dev/null
+++ b/arch/arm/boot/dts/infinity3.dtsi
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2020 thingy.jp.
+ * Author: Daniel Palmer <daniel@thingy.jp>
+ */
+
+#include "infinity.dtsi"
+
+&imi {
+ reg = <0xa0000000 0x20000>;
+};
diff --git a/arch/arm/boot/dts/mercury5-ssc8336n-midrived08.dts b/arch/arm/boot/dts/mercury5-ssc8336n-midrived08.dts
new file mode 100644
index 0000000..f24bd8c
--- /dev/null
+++ b/arch/arm/boot/dts/mercury5-ssc8336n-midrived08.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2020 thingy.jp.
+ * Author: Daniel Palmer <daniel@thingy.jp>
+ */
+
+/dts-v1/;
+#include "mercury5-ssc8336n.dtsi"
+
+/ {
+ model = "70mai Midrive D08";
+ compatible = "70mai,midrived08", "mstar,mercury5";
+
+ aliases {
+ serial0 = &pm_uart;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&pm_uart {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/mercury5-ssc8336n.dtsi b/arch/arm/boot/dts/mercury5-ssc8336n.dtsi
new file mode 100644
index 0000000..7d4a463
--- /dev/null
+++ b/arch/arm/boot/dts/mercury5-ssc8336n.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2020 thingy.jp.
+ * Author: Daniel Palmer <daniel@thingy.jp>
+ */
+
+#include "mercury5.dtsi"
+
+/ {
+ memory@20000000 {
+ device_type = "memory";
+ reg = <0x20000000 0x4000000>;
+ };
+};
diff --git a/arch/arm/boot/dts/mercury5.dtsi b/arch/arm/boot/dts/mercury5.dtsi
new file mode 100644
index 0000000..a7d0dd9
--- /dev/null
+++ b/arch/arm/boot/dts/mercury5.dtsi
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2020 thingy.jp.
+ * Author: Daniel Palmer <daniel@thingy.jp>
+ */
+
+#include "mstar-v7.dtsi"
+
+&imi {
+ reg = <0xa0000000 0x20000>;
+};
diff --git a/arch/arm/boot/dts/mstar-v7.dtsi b/arch/arm/boot/dts/mstar-v7.dtsi
new file mode 100644
index 0000000..3b7b9b7
--- /dev/null
+++ b/arch/arm/boot/dts/mstar-v7.dtsi
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2020 thingy.jp.
+ * Author: Daniel Palmer <daniel@thingy.jp>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&gic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x0>;
+ };
+ };
+
+ arch_timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2)
+ | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2)
+ | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2)
+ | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2)
+ | IRQ_TYPE_LEVEL_LOW)>;
+ /*
+ * we shouldn't need this but the vendor
+ * u-boot is broken
+ */
+ clock-frequency = <6000000>;
+ };
+
+ pmu: pmu {
+ compatible = "arm,cortex-a7-pmu";
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>;
+ };
+
+ soc: soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x16001000 0x16001000 0x00007000>,
+ <0x1f000000 0x1f000000 0x00400000>,
+ <0xa0000000 0xa0000000 0x20000>;
+
+ gic: interrupt-controller@16001000 {
+ compatible = "arm,cortex-a7-gic";
+ reg = <0x16001000 0x1000>,
+ <0x16002000 0x2000>,
+ <0x16004000 0x2000>,
+ <0x16006000 0x2000>;
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2)
+ | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ riu: bus@1f000000 {
+ compatible = "simple-bus";
+ reg = <0x1f000000 0x00400000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x1f000000 0x00400000>;
+
+ pmsleep: syscon@1c00 {
+ compatible = "mstar,msc313-pmsleep", "syscon";
+ reg = <0x1c00 0x100>;
+ };
+
+ reboot {
+ compatible = "syscon-reboot";
+ regmap = <&pmsleep>;
+ offset = <0xb8>;
+ mask = <0x79>;
+ };
+
+ l3bridge: l3bridge@204400 {
+ compatible = "mstar,l3bridge";
+ reg = <0x204400 0x200>;
+ };
+
+ pm_uart: uart@221000 {
+ compatible = "ns16550a";
+ reg = <0x221000 0x100>;
+ reg-shift = <3>;
+ clock-frequency = <172000000>;
+ status = "disabled";
+ };
+ };
+
+ imi: sram@a0000000 {
+ compatible = "mmio-sram";
+ reg = <0xa0000000 0x10000>;
+ };
+ };
+};
diff --git a/arch/arm/mach-mstar/Kconfig b/arch/arm/mach-mstar/Kconfig
new file mode 100644
index 0000000..52744fe
--- /dev/null
+++ b/arch/arm/mach-mstar/Kconfig
@@ -0,0 +1,26 @@
+menuconfig ARCH_MSTARV7
+ bool "MStar/Sigmastar Armv7 SoC Support"
+ depends on ARCH_MULTI_V7
+ select ARM_GIC
+ select ARM_HEAVY_MB
+ help
+ Support for newer MStar/Sigmastar SoC families that are
+ based on Armv7 cores like the Cortex A7 and share the same
+ basic hardware like the infinity and mercury series.
+
+if ARCH_MSTARV7
+
+config MACH_INFINITY
+ bool "MStar/Sigmastar infinity SoC support"
+ default ARCH_MSTARV7
+ help
+ Support for MStar/Sigmastar infinity IP camera SoCs.
+
+config MACH_MERCURY
+ bool "MStar/Sigmastar mercury SoC support"
+ default ARCH_MSTARV7
+ help
+ Support for MStar/Sigmastar mercury dash camera SoCs.
+ Note that older Mercury2 SoCs are ARM9 based and not supported.
+
+endif
diff --git a/arch/arm/mach-mstar/Makefile b/arch/arm/mach-mstar/Makefile
new file mode 100644
index 0000000..93b0391
--- /dev/null
+++ b/arch/arm/mach-mstar/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_ARCH_MSTARV7) += mstarv7.o
diff --git a/arch/arm/mach-mstar/mstarv7.c b/arch/arm/mach-mstar/mstarv7.c
new file mode 100644
index 0000000..81a4cbc
--- /dev/null
+++ b/arch/arm/mach-mstar/mstarv7.c
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree support for MStar/Sigmastar Armv7 SoCs
+ *
+ * Copyright (c) 2020 thingy.jp
+ * Author: Daniel Palmer <daniel@thingy.jp>
+ */
+
+#include <linux/init.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/io.h>
+
+/*
+ * In the u-boot code the area these registers are in is
+ * called "L3 bridge" and there are register descriptions
+ * for something in the same area called "AXI".
+ *
+ * It's not exactly known what this is but the vendor code
+ * for both u-boot and linux share calls to "flush the miu pipe".
+ * This seems to be to force pending CPU writes to memory so that
+ * the state is right before DMA capable devices try to read
+ * descriptors and data the CPU has prepared. Without doing this
+ * ethernet doesn't work reliably for example.
+ */
+
+#define MSTARV7_L3BRIDGE_FLUSH 0x14
+#define MSTARV7_L3BRIDGE_STATUS 0x40
+#define MSTARV7_L3BRIDGE_FLUSH_TRIGGER BIT(0)
+#define MSTARV7_L3BRIDGE_STATUS_DONE BIT(12)
+
+static void __iomem *l3bridge;
+
+static const char * const mstarv7_board_dt_compat[] __initconst = {
+ "mstar,infinity",
+ "mstar,infinity3",
+ "mstar,mercury5",
+ NULL,
+};
+
+/*
+ * This may need locking to deal with situations where an interrupt
+ * happens while we are in here and mb() gets called by the interrupt handler.
+ *
+ * The vendor code did have a spin lock but it doesn't seem to be needed and
+ * removing it hasn't caused any side effects so far.
+ *
+ * [writel|readl]_relaxed have to be used here because otherwise
+ * we'd end up right back in here.
+ */
+static void mstarv7_mb(void)
+{
+ /* toggle the flush miu pipe fire bit */
+ writel_relaxed(0, l3bridge + MSTARV7_L3BRIDGE_FLUSH);
+ writel_relaxed(MSTARV7_L3BRIDGE_FLUSH_TRIGGER, l3bridge
+ + MSTARV7_L3BRIDGE_FLUSH);
+ while (!(readl_relaxed(l3bridge + MSTARV7_L3BRIDGE_STATUS)
+ & MSTARV7_L3BRIDGE_STATUS_DONE)) {
+ /* wait for flush to complete */
+ }
+}
+
+static void __init mstarv7_init(void)
+{
+ struct device_node *np;
+
+ np = of_find_compatible_node(NULL, NULL, "mstar,l3bridge");
+ l3bridge = of_iomap(np, 0);
+ if (l3bridge)
+ soc_mb = mstarv7_mb;
+ else
+ pr_warn("Failed to install memory barrier, DMA will be broken!\n");
+}
+
+DT_MACHINE_START(MSTARV7_DT, "MStar/Sigmastar Armv7 (Device Tree)")
+ .dt_compat = mstarv7_board_dt_compat,
+ .init_machine = mstarv7_init,
+MACHINE_END
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 1d3710e..cd58f84 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -89,6 +89,20 @@
help
This enables support for ARMv8 based Samsung Exynos SoC family.
+config ARCH_SPARX5
+ bool "ARMv8 based Microchip Sparx5 SoC family"
+ select PINCTRL
+ select DW_APB_TIMER_OF
+ help
+ This enables support for the Microchip Sparx5 ARMv8-based
+ SoC family of TSN-capable gigabit switches.
+
+ The SparX-5 Ethernet switch family provides a rich set of
+ switching features such as advanced TCAM-based VLAN and QoS
+ processing enabling delivery of differentiated services, and
+ security through TCAM-based frame processing using versatile
+ content aware processor (VCAP).
+
config ARCH_K3
bool "Texas Instruments Inc. K3 multicore SoC architecture"
select PM_GENERIC_DOMAINS if PM
@@ -122,6 +136,11 @@
help
This enables support for Hisilicon ARMv8 SoC family
+config ARCH_KEEMBAY
+ bool "Keem Bay SoC"
+ help
+ This enables support for Intel Movidius SoC code-named Keem Bay.
+
config ARCH_MEDIATEK
bool "MediaTek SoC Family"
select ARM_GIC
diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
index 6f3e155..270e8aa 100644
--- a/arch/arm64/boot/dts/Makefile
+++ b/arch/arm64/boot/dts/Makefile
@@ -17,6 +17,7 @@
subdir-y += lg
subdir-y += marvell
subdir-y += mediatek
+subdir-y += microchip
subdir-y += nvidia
subdir-y += qcom
subdir-y += realtek
diff --git a/arch/arm64/boot/dts/intel/Makefile b/arch/arm64/boot/dts/intel/Makefile
index 40cb16e..296ecee 100644
--- a/arch/arm64/boot/dts/intel/Makefile
+++ b/arch/arm64/boot/dts/intel/Makefile
@@ -1,3 +1,4 @@
# SPDX-License-Identifier: GPL-2.0-only
dtb-$(CONFIG_ARCH_AGILEX) += socfpga_agilex_socdk.dtb \
socfpga_agilex_socdk_nand.dtb
+dtb-$(CONFIG_ARCH_KEEMBAY) += keembay-evm.dtb
diff --git a/arch/arm64/boot/dts/intel/keembay-evm.dts b/arch/arm64/boot/dts/intel/keembay-evm.dts
new file mode 100644
index 0000000..466c853
--- /dev/null
+++ b/arch/arm64/boot/dts/intel/keembay-evm.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
+/*
+ * Copyright (C) 2020, Intel Corporation
+ *
+ * Device tree describing Keem Bay EVM board.
+ */
+
+/dts-v1/;
+
+#include "keembay-soc.dtsi"
+
+/ {
+ model = "Keem Bay EVM";
+ compatible = "intel,keembay-evm", "intel,keembay";
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ serial0 = &uart3;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ /* 2GB of DDR memory. */
+ reg = <0x0 0x80000000 0x0 0x80000000>;
+ };
+
+};
+
+&uart3 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/intel/keembay-soc.dtsi b/arch/arm64/boot/dts/intel/keembay-soc.dtsi
new file mode 100644
index 0000000..781761d
--- /dev/null
+++ b/arch/arm64/boot/dts/intel/keembay-soc.dtsi
@@ -0,0 +1,123 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
+/*
+ * Copyright (C) 2020, Intel Corporation.
+ *
+ * Device tree describing Keem Bay SoC.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "arm,cortex-a53";
+ device_type = "cpu";
+ reg = <0x0>;
+ enable-method = "psci";
+ };
+
+ cpu@1 {
+ compatible = "arm,cortex-a53";
+ device_type = "cpu";
+ reg = <0x1>;
+ enable-method = "psci";
+ };
+
+ cpu@2 {
+ compatible = "arm,cortex-a53";
+ device_type = "cpu";
+ reg = <0x2>;
+ enable-method = "psci";
+ };
+
+ cpu@3 {
+ compatible = "arm,cortex-a53";
+ device_type = "cpu";
+ reg = <0x3>;
+ enable-method = "psci";
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ gic: interrupt-controller@20500000 {
+ compatible = "arm,gic-v3";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0x0 0x20500000 0x0 0x20000>, /* GICD */
+ <0x0 0x20580000 0x0 0x80000>; /* GICR */
+ /* VGIC maintenance interrupt */
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ /* Secure, non-secure, virtual, and hypervisor */
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <GIC_PPI 0x7 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ uart0: serial@20150000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x0 0x20150000 0x0 0x100>;
+ interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <24000000>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart1: serial@20160000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x0 0x20160000 0x0 0x100>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <24000000>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart2: serial@20170000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x0 0x20170000 0x0 0x100>;
+ interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <24000000>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart3: serial@20180000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x0 0x20180000 0x0 0x100>;
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <24000000>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/microchip/Makefile b/arch/arm64/boot/dts/microchip/Makefile
new file mode 100644
index 0000000..c6e0313
--- /dev/null
+++ b/arch/arm64/boot/dts/microchip/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_SPARX5) += sparx5_pcb125.dtb
+dtb-$(CONFIG_ARCH_SPARX5) += sparx5_pcb134.dtb sparx5_pcb134_emmc.dtb
+dtb-$(CONFIG_ARCH_SPARX5) += sparx5_pcb135.dtb sparx5_pcb135_emmc.dtb
diff --git a/arch/arm64/boot/dts/microchip/sparx5.dtsi b/arch/arm64/boot/dts/microchip/sparx5.dtsi
new file mode 100644
index 0000000..cf712e8
--- /dev/null
+++ b/arch/arm64/boot/dts/microchip/sparx5.dtsi
@@ -0,0 +1,213 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "microchip,sparx5";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+ core1 {
+ cpu = <&cpu1>;
+ };
+ };
+ };
+ cpu0: cpu@0 {
+ compatible = "arm,cortex-a53";
+ device_type = "cpu";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ next-level-cache = <&L2_0>;
+ };
+ cpu1: cpu@1 {
+ compatible = "arm,cortex-a53";
+ device_type = "cpu";
+ reg = <0x0 0x1>;
+ enable-method = "psci";
+ next-level-cache = <&L2_0>;
+ };
+ L2_0: l2-cache0 {
+ compatible = "cache";
+ };
+ };
+
+ arm-pmu {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>, <&cpu1>;
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ lcpll_clk: lcpll-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <2500000000>;
+ };
+
+ clks: clock-controller@61110000c {
+ compatible = "microchip,sparx5-dpll";
+ #clock-cells = <1>;
+ clocks = <&lcpll_clk>;
+ reg = <0x6 0x1110000c 0x24>;
+ };
+
+ ahb_clk: ahb-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <250000000>;
+ };
+
+ sys_clk: sys-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <625000000>;
+ };
+
+ axi: axi@600000000 {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges;
+
+ gic: interrupt-controller@600300000 {
+ compatible = "arm,gic-v3";
+ #interrupt-cells = <3>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-controller;
+ reg = <0x6 0x00300000 0x10000>, /* GIC Dist */
+ <0x6 0x00340000 0xc0000>, /* GICR */
+ <0x6 0x00200000 0x2000>, /* GICC */
+ <0x6 0x00210000 0x2000>, /* GICV */
+ <0x6 0x00220000 0x2000>; /* GICH */
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ uart0: serial@600100000 {
+ pinctrl-0 = <&uart_pins>;
+ pinctrl-names = "default";
+ compatible = "ns16550a";
+ reg = <0x6 0x00100000 0x20>;
+ clocks = <&ahb_clk>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+ status = "disabled";
+ };
+
+ uart1: serial@600102000 {
+ pinctrl-0 = <&uart2_pins>;
+ pinctrl-names = "default";
+ compatible = "ns16550a";
+ reg = <0x6 0x00102000 0x20>;
+ clocks = <&ahb_clk>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+
+ status = "disabled";
+ };
+
+ timer1: timer@600105000 {
+ compatible = "snps,dw-apb-timer";
+ reg = <0x6 0x00105000 0x1000>;
+ clocks = <&ahb_clk>;
+ clock-names = "timer";
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ gpio: pinctrl@6110101e0 {
+ compatible = "microchip,sparx5-pinctrl";
+ reg = <0x6 0x110101e0 0x90>, <0x6 0x10508010 0x100>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&gpio 0 0 64>;
+ interrupt-controller;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <2>;
+
+ uart_pins: uart-pins {
+ pins = "GPIO_10", "GPIO_11";
+ function = "uart";
+ };
+
+ uart2_pins: uart2-pins {
+ pins = "GPIO_26", "GPIO_27";
+ function = "uart2";
+ };
+
+ i2c_pins: i2c-pins {
+ pins = "GPIO_14", "GPIO_15";
+ function = "twi";
+ };
+
+ i2c2_pins: i2c2-pins {
+ pins = "GPIO_28", "GPIO_29";
+ function = "twi2";
+ };
+ };
+
+ i2c0: i2c@600101000 {
+ compatible = "snps,designware-i2c";
+ status = "disabled";
+ pinctrl-0 = <&i2c_pins>;
+ pinctrl-names = "default";
+ reg = <0x6 0x00101000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ i2c-sda-hold-time-ns = <300>;
+ clock-frequency = <100000>;
+ clocks = <&ahb_clk>;
+ };
+
+ i2c1: i2c@600103000 {
+ compatible = "snps,designware-i2c";
+ status = "disabled";
+ pinctrl-0 = <&i2c2_pins>;
+ pinctrl-names = "default";
+ reg = <0x6 0x00103000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ i2c-sda-hold-time-ns = <300>;
+ clock-frequency = <100000>;
+ clocks = <&ahb_clk>;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb125.dts b/arch/arm64/boot/dts/microchip/sparx5_pcb125.dts
new file mode 100644
index 0000000..91ee5b6
--- /dev/null
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb125.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries.
+ */
+
+/dts-v1/;
+#include "sparx5_pcb_common.dtsi"
+
+/ {
+ model = "Sparx5 PCB125 Reference Board";
+ compatible = "microchip,sparx5-pcb125", "microchip,sparx5";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x00000000 0x10000000>;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb134.dts b/arch/arm64/boot/dts/microchip/sparx5_pcb134.dts
new file mode 100644
index 0000000..feee4e9
--- /dev/null
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb134.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries.
+ */
+
+/dts-v1/;
+#include "sparx5_pcb134_board.dtsi"
+
+/ {
+ model = "Sparx5 PCB134 Reference Board (NAND)";
+ compatible = "microchip,sparx5-pcb134", "microchip,sparx5";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x00000000 0x10000000>;
+ };
+};
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi
new file mode 100644
index 0000000..18a535a
--- /dev/null
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi
@@ -0,0 +1,252 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries.
+ */
+
+/dts-v1/;
+#include "sparx5_pcb_common.dtsi"
+
+/{
+ aliases {
+ i2c0 = &i2c0;
+ i2c100 = &i2c100;
+ i2c101 = &i2c101;
+ i2c102 = &i2c102;
+ i2c103 = &i2c103;
+ i2c104 = &i2c104;
+ i2c105 = &i2c105;
+ i2c106 = &i2c106;
+ i2c107 = &i2c107;
+ i2c108 = &i2c108;
+ i2c109 = &i2c109;
+ i2c110 = &i2c110;
+ i2c111 = &i2c111;
+ i2c112 = &i2c112;
+ i2c113 = &i2c113;
+ i2c114 = &i2c114;
+ i2c115 = &i2c115;
+ i2c116 = &i2c116;
+ i2c117 = &i2c117;
+ i2c118 = &i2c118;
+ i2c119 = &i2c119;
+ };
+
+ gpio-restart {
+ compatible = "gpio-restart";
+ gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
+ priority = <200>;
+ };
+};
+
+&gpio {
+ i2cmux_pins_i: i2cmux-pins-i {
+ pins = "GPIO_16", "GPIO_17", "GPIO_18", "GPIO_19",
+ "GPIO_20", "GPIO_22", "GPIO_36", "GPIO_35",
+ "GPIO_50", "GPIO_51", "GPIO_56", "GPIO_57";
+ function = "twi_scl_m";
+ output-low;
+ };
+ i2cmux_0: i2cmux-0 {
+ pins = "GPIO_16";
+ function = "twi_scl_m";
+ output-high;
+ };
+ i2cmux_1: i2cmux-1 {
+ pins = "GPIO_17";
+ function = "twi_scl_m";
+ output-high;
+ };
+ i2cmux_2: i2cmux-2 {
+ pins = "GPIO_18";
+ function = "twi_scl_m";
+ output-high;
+ };
+ i2cmux_3: i2cmux-3 {
+ pins = "GPIO_19";
+ function = "twi_scl_m";
+ output-high;
+ };
+ i2cmux_4: i2cmux-4 {
+ pins = "GPIO_20";
+ function = "twi_scl_m";
+ output-high;
+ };
+ i2cmux_5: i2cmux-5 {
+ pins = "GPIO_22";
+ function = "twi_scl_m";
+ output-high;
+ };
+ i2cmux_6: i2cmux-6 {
+ pins = "GPIO_36";
+ function = "twi_scl_m";
+ output-high;
+ };
+ i2cmux_7: i2cmux-7 {
+ pins = "GPIO_35";
+ function = "twi_scl_m";
+ output-high;
+ };
+ i2cmux_8: i2cmux-8 {
+ pins = "GPIO_50";
+ function = "twi_scl_m";
+ output-high;
+ };
+ i2cmux_9: i2cmux-9 {
+ pins = "GPIO_51";
+ function = "twi_scl_m";
+ output-high;
+ };
+ i2cmux_10: i2cmux-10 {
+ pins = "GPIO_56";
+ function = "twi_scl_m";
+ output-high;
+ };
+ i2cmux_11: i2cmux-11 {
+ pins = "GPIO_57";
+ function = "twi_scl_m";
+ output-high;
+ };
+};
+
+&axi {
+ i2c0_imux: i2c0-imux@0 {
+ compatible = "i2c-mux-pinctrl";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-parent = <&i2c0>;
+ };
+ i2c0_emux: i2c0-emux@0 {
+ compatible = "i2c-mux-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-parent = <&i2c0>;
+ };
+};
+
+&i2c0_imux {
+ pinctrl-names =
+ "i2c100", "i2c101", "i2c102", "i2c103",
+ "i2c104", "i2c105", "i2c106", "i2c107",
+ "i2c108", "i2c109", "i2c110", "i2c111", "idle";
+ pinctrl-0 = <&i2cmux_0>;
+ pinctrl-1 = <&i2cmux_1>;
+ pinctrl-2 = <&i2cmux_2>;
+ pinctrl-3 = <&i2cmux_3>;
+ pinctrl-4 = <&i2cmux_4>;
+ pinctrl-5 = <&i2cmux_5>;
+ pinctrl-6 = <&i2cmux_6>;
+ pinctrl-7 = <&i2cmux_7>;
+ pinctrl-8 = <&i2cmux_8>;
+ pinctrl-9 = <&i2cmux_9>;
+ pinctrl-10 = <&i2cmux_10>;
+ pinctrl-11 = <&i2cmux_11>;
+ pinctrl-12 = <&i2cmux_pins_i>;
+ i2c100: i2c_sfp1 {
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c101: i2c_sfp2 {
+ reg = <0x1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c102: i2c_sfp3 {
+ reg = <0x2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c103: i2c_sfp4 {
+ reg = <0x3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c104: i2c_sfp5 {
+ reg = <0x4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c105: i2c_sfp6 {
+ reg = <0x5>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c106: i2c_sfp7 {
+ reg = <0x6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c107: i2c_sfp8 {
+ reg = <0x7>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c108: i2c_sfp9 {
+ reg = <0x8>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c109: i2c_sfp10 {
+ reg = <0x9>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c110: i2c_sfp11 {
+ reg = <0xa>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c111: i2c_sfp12 {
+ reg = <0xb>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+};
+
+&i2c0_emux {
+ mux-gpios = <&gpio 55 GPIO_ACTIVE_HIGH
+ &gpio 60 GPIO_ACTIVE_HIGH
+ &gpio 61 GPIO_ACTIVE_HIGH
+ &gpio 54 GPIO_ACTIVE_HIGH>;
+ idle-state = <0x8>;
+ i2c112: i2c_sfp13 {
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c113: i2c_sfp14 {
+ reg = <0x1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c114: i2c_sfp15 {
+ reg = <0x2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c115: i2c_sfp16 {
+ reg = <0x3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c116: i2c_sfp17 {
+ reg = <0x4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c117: i2c_sfp18 {
+ reg = <0x5>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c118: i2c_sfp19 {
+ reg = <0x6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c119: i2c_sfp20 {
+ reg = <0x7>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+};
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb134_emmc.dts b/arch/arm64/boot/dts/microchip/sparx5_pcb134_emmc.dts
new file mode 100644
index 0000000..10081a6
--- /dev/null
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb134_emmc.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries.
+ */
+
+/dts-v1/;
+#include "sparx5_pcb134_board.dtsi"
+
+/ {
+ model = "Sparx5 PCB134 Reference Board (eMMC enabled)";
+ compatible = "microchip,sparx5-pcb134", "microchip,sparx5";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x00000000 0x10000000>;
+ };
+};
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb135.dts b/arch/arm64/boot/dts/microchip/sparx5_pcb135.dts
new file mode 100644
index 0000000..20e409a
--- /dev/null
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb135.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries.
+ */
+
+/dts-v1/;
+#include "sparx5_pcb135_board.dtsi"
+
+/ {
+ model = "Sparx5 PCB135 Reference Board (NAND)";
+ compatible = "microchip,sparx5-pcb135", "microchip,sparx5";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x00000000 0x10000000>;
+ };
+};
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi
new file mode 100644
index 0000000..d71f11a
--- /dev/null
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries.
+ */
+
+/dts-v1/;
+#include "sparx5_pcb_common.dtsi"
+
+/{
+ aliases {
+ i2c0 = &i2c0;
+ i2c152 = &i2c152;
+ i2c153 = &i2c153;
+ i2c154 = &i2c154;
+ i2c155 = &i2c155;
+ };
+
+ gpio-restart {
+ compatible = "gpio-restart";
+ gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
+ priority = <200>;
+ };
+};
+
+&gpio {
+ i2cmux_pins_i: i2cmux-pins-i {
+ pins = "GPIO_35", "GPIO_36",
+ "GPIO_50", "GPIO_51";
+ function = "twi_scl_m";
+ output-low;
+ };
+ i2cmux_s29: i2cmux-0 {
+ pins = "GPIO_35";
+ function = "twi_scl_m";
+ output-high;
+ };
+ i2cmux_s30: i2cmux-1 {
+ pins = "GPIO_36";
+ function = "twi_scl_m";
+ output-high;
+ };
+ i2cmux_s31: i2cmux-2 {
+ pins = "GPIO_50";
+ function = "twi_scl_m";
+ output-high;
+ };
+ i2cmux_s32: i2cmux-3 {
+ pins = "GPIO_51";
+ function = "twi_scl_m";
+ output-high;
+ };
+};
+
+&axi {
+ i2c0_imux: i2c0-imux@0 {
+ compatible = "i2c-mux-pinctrl";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-parent = <&i2c0>;
+ };
+};
+
+&i2c0_imux {
+ pinctrl-names =
+ "i2c152", "i2c153", "i2c154", "i2c155",
+ "idle";
+ pinctrl-0 = <&i2cmux_s29>;
+ pinctrl-1 = <&i2cmux_s30>;
+ pinctrl-2 = <&i2cmux_s31>;
+ pinctrl-3 = <&i2cmux_s32>;
+ pinctrl-4 = <&i2cmux_pins_i>;
+ i2c152: i2c_sfp1 {
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c153: i2c_sfp2 {
+ reg = <0x1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c154: i2c_sfp3 {
+ reg = <0x2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c155: i2c_sfp4 {
+ reg = <0x3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+};
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb135_emmc.dts b/arch/arm64/boot/dts/microchip/sparx5_pcb135_emmc.dts
new file mode 100644
index 0000000..741f0e1
--- /dev/null
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb135_emmc.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries.
+ */
+
+/dts-v1/;
+#include "sparx5_pcb135_board.dtsi"
+
+/ {
+ model = "Sparx5 PCB135 Reference Board (eMMC enabled)";
+ compatible = "microchip,sparx5-pcb135", "microchip,sparx5";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x00000000 0x10000000>;
+ };
+};
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb_common.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb_common.dtsi
new file mode 100644
index 0000000..9d1a082
--- /dev/null
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb_common.dtsi
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries.
+ */
+
+/dts-v1/;
+#include "sparx5.dtsi"
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+};
diff --git a/include/dt-bindings/clock/microchip,sparx5.h b/include/dt-bindings/clock/microchip,sparx5.h
new file mode 100644
index 0000000..4b04dabace
--- /dev/null
+++ b/include/dt-bindings/clock/microchip,sparx5.h
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2019 Microchip Inc.
+ *
+ * Author: Lars Povlsen <lars.povlsen@microchip.com>
+ */
+
+#ifndef _DT_BINDINGS_CLK_SPARX5_H
+#define _DT_BINDINGS_CLK_SPARX5_H
+
+#define CLK_ID_CORE 0
+#define CLK_ID_DDR 1
+#define CLK_ID_CPU2 2
+#define CLK_ID_ARM2 3
+#define CLK_ID_AUX1 4
+#define CLK_ID_AUX2 5
+#define CLK_ID_AUX3 6
+#define CLK_ID_AUX4 7
+#define CLK_ID_SYNCE 8
+
+#define N_CLOCKS 9
+
+#endif
