blob: c138b1a6dec3c9af46df99ff0c627d02514c54c9 [file] [log] [blame]
/*
* Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
* reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the NetLogic
* license below:
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
* BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
* OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
* IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <linux/init.h>
#include <asm/asm.h>
#include <asm/asm-offsets.h>
#include <asm/regdef.h>
#include <asm/mipsregs.h>
#include <asm/stackframe.h>
#include <asm/asmmacro.h>
#include <asm/addrspace.h>
#include <asm/netlogic/common.h>
#include <asm/netlogic/xlp-hal/iomap.h>
#include <asm/netlogic/xlp-hal/xlp.h>
#include <asm/netlogic/xlp-hal/sys.h>
#include <asm/netlogic/xlp-hal/cpucontrol.h>
#define CP0_EBASE $15
#define SYS_CPU_COHERENT_BASE(node) CKSEG1ADDR(XLP_DEFAULT_IO_BASE) + \
XLP_IO_SYS_OFFSET(node) + XLP_IO_PCI_HDRSZ + \
SYS_CPU_NONCOHERENT_MODE * 4
.macro __config_lsu
li t0, LSU_DEFEATURE
mfcr t1, t0
lui t2, 0x4080 /* Enable Unaligned Access, L2HPE */
or t1, t1, t2
li t2, ~0xe /* S1RCM */
and t1, t1, t2
mtcr t1, t0
li t0, SCHED_DEFEATURE
lui t1, 0x0100 /* Experimental: Disable BRU accepting ALU ops */
mtcr t1, t0
.endm
/*
* The cores can come start when they are woken up. This is also the NMI
* entry, so check that first.
*
* The data corresponding to reset is stored at RESET_DATA_PHYS location,
* this will have the thread mask (used when core is woken up) and the
* current NMI handler in case we reached here for an NMI.
*
* When a core or thread is newly woken up, it loops in a 'wait'. When
* the CPU really needs waking up, we send an NMI to it, with the NMI
* handler set to prom_boot_secondary_cpus
*/
.set noreorder
.set noat
.set arch=xlr /* for mfcr/mtcr, XLR is sufficient */
FEXPORT(nlm_reset_entry)
dmtc0 k0, $22, 6
dmtc0 k1, $22, 7
mfc0 k0, CP0_STATUS
li k1, 0x80000
and k1, k0, k1
beqz k1, 1f /* go to real reset entry */
nop
li k1, CKSEG1ADDR(RESET_DATA_PHYS) /* NMI */
ld k0, BOOT_NMI_HANDLER(k1)
jr k0
nop
1: /* Entry point on core wakeup */
mfc0 t0, CP0_EBASE, 1
mfc0 t1, CP0_EBASE, 1
srl t1, 5
andi t1, 0x3 /* t1 <- node */
li t2, 0x40000
mul t3, t2, t1 /* t3 = node * 0x40000 */
srl t0, t0, 2
and t0, t0, 0x7 /* t0 <- core */
li t1, 0x1
sll t0, t1, t0
nor t0, t0, zero /* t0 <- ~(1 << core) */
li t2, SYS_CPU_COHERENT_BASE(0)
add t2, t2, t3 /* t2 <- SYS offset for node */
lw t1, 0(t2)
and t1, t1, t0
sw t1, 0(t2)
/* read back to ensure complete */
lw t1, 0(t2)
sync
/* Configure LSU on Non-0 Cores. */
__config_lsu
/*
* Wake up sibling threads from the initial thread in
* a core.
*/
EXPORT(nlm_boot_siblings)
li t0, CKSEG1ADDR(RESET_DATA_PHYS)
lw t1, BOOT_THREAD_MODE(t0) /* t1 <- thread mode */
li t0, ((CPU_BLOCKID_MAP << 8) | MAP_THREADMODE)
mfcr t2, t0
or t2, t2, t1
mtcr t2, t0
/*
* The new hardware thread starts at the next instruction
* For all the cases other than core 0 thread 0, we will
* jump to the secondary wait function.
*/
mfc0 v0, CP0_EBASE, 1
andi v0, 0x7f /* v0 <- node/core */
#if 1
/* A0 errata - Write MMU_SETUP after changing thread mode register. */
andi v1, v0, 0x3 /* v1 <- thread id */
bnez v1, 2f
nop
li t0, MMU_SETUP
li t1, 0
mtcr t1, t0
ehb
#endif
2: beqz v0, 4f
nop
/* setup status reg */
mfc0 t1, CP0_STATUS
li t0, ST0_BEV
or t1, t0
xor t1, t0
#ifdef CONFIG_64BIT
ori t1, ST0_KX
#endif
mtc0 t1, CP0_STATUS
/* mark CPU ready */
PTR_LA t1, nlm_cpu_ready
sll v1, v0, 2
PTR_ADDU t1, v1
li t2, 1
sw t2, 0(t1)
/* Wait until NMI hits */
3: wait
j 3b
nop
/*
* For the boot CPU, we have to restore registers and
* return
*/
4: dmfc0 t0, $4, 2 /* restore SP from UserLocal */
li t1, 0xfadebeef
dmtc0 t1, $4, 2 /* restore SP from UserLocal */
PTR_SUBU sp, t0, PT_SIZE
RESTORE_ALL
jr ra
nop
EXPORT(nlm_reset_entry_end)
FEXPORT(xlp_boot_core0_siblings) /* "Master" cpu starts from here */
__config_lsu
dmtc0 sp, $4, 2 /* SP saved in UserLocal */
SAVE_ALL
sync
/* find the location to which nlm_boot_siblings was relocated */
li t0, CKSEG1ADDR(RESET_VEC_PHYS)
dla t1, nlm_reset_entry
dla t2, nlm_boot_siblings
dsubu t2, t1
daddu t2, t0
/* call it */
jr t2
nop
/* not reached */
__CPUINIT
NESTED(nlm_boot_secondary_cpus, 16, sp)
PTR_LA t1, nlm_next_sp
PTR_L sp, 0(t1)
PTR_LA t1, nlm_next_gp
PTR_L gp, 0(t1)
/* a0 has the processor id */
PTR_LA t0, nlm_early_init_secondary
jalr t0
nop
PTR_LA t0, smp_bootstrap
jr t0
nop
END(nlm_boot_secondary_cpus)
__FINIT
/*
* In case of RMIboot bootloader which is used on XLR boards, the CPUs
* be already woken up and waiting in bootloader code.
* This will get them out of the bootloader code and into linux. Needed
* because the bootloader area will be taken and initialized by linux.
*/
__CPUINIT
NESTED(nlm_rmiboot_preboot, 16, sp)
mfc0 t0, $15, 1 # read ebase
andi t0, 0x1f # t0 has the processor_id()
andi t2, t0, 0x3 # thread no
sll t0, 2 # offset in cpu array
PTR_LA t1, nlm_cpu_ready # mark CPU ready
PTR_ADDU t1, t0
li t3, 1
sw t3, 0(t1)
bnez t2, 1f # skip thread programming
nop # for non zero hw threads
/*
* MMU setup only for first thread in core
*/
li t0, 0x400
mfcr t1, t0
li t2, 6 # XLR thread mode mask
nor t3, t2, zero
and t2, t1, t2 # t2 - current thread mode
li v0, CKSEG1ADDR(RESET_DATA_PHYS)
lw v1, BOOT_THREAD_MODE(v0) # v1 - new thread mode
sll v1, 1
beq v1, t2, 1f # same as request value
nop # nothing to do */
and t2, t1, t3 # mask out old thread mode
or t1, t2, v1 # put in new value
mtcr t1, t0 # update core control
1: wait
j 1b
nop
END(nlm_rmiboot_preboot)
__FINIT