|  | /* | 
|  | * drivers/base/power/trace.c | 
|  | * | 
|  | * Copyright (C) 2006 Linus Torvalds | 
|  | * | 
|  | * Trace facility for suspend/resume problems, when none of the | 
|  | * devices may be working. | 
|  | */ | 
|  |  | 
|  | #include <linux/resume-trace.h> | 
|  | #include <linux/export.h> | 
|  | #include <linux/rtc.h> | 
|  |  | 
|  | #include <asm/rtc.h> | 
|  |  | 
|  | #include "power.h" | 
|  |  | 
|  | /* | 
|  | * Horrid, horrid, horrid. | 
|  | * | 
|  | * It turns out that the _only_ piece of hardware that actually | 
|  | * keeps its value across a hard boot (and, more importantly, the | 
|  | * POST init sequence) is literally the realtime clock. | 
|  | * | 
|  | * Never mind that an RTC chip has 114 bytes (and often a whole | 
|  | * other bank of an additional 128 bytes) of nice SRAM that is | 
|  | * _designed_ to keep data - the POST will clear it. So we literally | 
|  | * can just use the few bytes of actual time data, which means that | 
|  | * we're really limited. | 
|  | * | 
|  | * It means, for example, that we can't use the seconds at all | 
|  | * (since the time between the hang and the boot might be more | 
|  | * than a minute), and we'd better not depend on the low bits of | 
|  | * the minutes either. | 
|  | * | 
|  | * There are the wday fields etc, but I wouldn't guarantee those | 
|  | * are dependable either. And if the date isn't valid, either the | 
|  | * hw or POST will do strange things. | 
|  | * | 
|  | * So we're left with: | 
|  | *  - year: 0-99 | 
|  | *  - month: 0-11 | 
|  | *  - day-of-month: 1-28 | 
|  | *  - hour: 0-23 | 
|  | *  - min: (0-30)*2 | 
|  | * | 
|  | * Giving us a total range of 0-16128000 (0xf61800), ie less | 
|  | * than 24 bits of actual data we can save across reboots. | 
|  | * | 
|  | * And if your box can't boot in less than three minutes, | 
|  | * you're screwed. | 
|  | * | 
|  | * Now, almost 24 bits of data is pitifully small, so we need | 
|  | * to be pretty dense if we want to use it for anything nice. | 
|  | * What we do is that instead of saving off nice readable info, | 
|  | * we save off _hashes_ of information that we can hopefully | 
|  | * regenerate after the reboot. | 
|  | * | 
|  | * In particular, this means that we might be unlucky, and hit | 
|  | * a case where we have a hash collision, and we end up not | 
|  | * being able to tell for certain exactly which case happened. | 
|  | * But that's hopefully unlikely. | 
|  | * | 
|  | * What we do is to take the bits we can fit, and split them | 
|  | * into three parts (16*997*1009 = 16095568), and use the values | 
|  | * for: | 
|  | *  - 0-15: user-settable | 
|  | *  - 0-996: file + line number | 
|  | *  - 0-1008: device | 
|  | */ | 
|  | #define USERHASH (16) | 
|  | #define FILEHASH (997) | 
|  | #define DEVHASH (1009) | 
|  |  | 
|  | #define DEVSEED (7919) | 
|  |  | 
|  | static unsigned int dev_hash_value; | 
|  |  | 
|  | static int set_magic_time(unsigned int user, unsigned int file, unsigned int device) | 
|  | { | 
|  | unsigned int n = user + USERHASH*(file + FILEHASH*device); | 
|  |  | 
|  | // June 7th, 2006 | 
|  | static struct rtc_time time = { | 
|  | .tm_sec = 0, | 
|  | .tm_min = 0, | 
|  | .tm_hour = 0, | 
|  | .tm_mday = 7, | 
|  | .tm_mon = 5,	// June - counting from zero | 
|  | .tm_year = 106, | 
|  | .tm_wday = 3, | 
|  | .tm_yday = 160, | 
|  | .tm_isdst = 1 | 
|  | }; | 
|  |  | 
|  | time.tm_year = (n % 100); | 
|  | n /= 100; | 
|  | time.tm_mon = (n % 12); | 
|  | n /= 12; | 
|  | time.tm_mday = (n % 28) + 1; | 
|  | n /= 28; | 
|  | time.tm_hour = (n % 24); | 
|  | n /= 24; | 
|  | time.tm_min = (n % 20) * 3; | 
|  | n /= 20; | 
|  | set_rtc_time(&time); | 
|  | return n ? -1 : 0; | 
|  | } | 
|  |  | 
|  | static unsigned int read_magic_time(void) | 
|  | { | 
|  | struct rtc_time time; | 
|  | unsigned int val; | 
|  |  | 
|  | get_rtc_time(&time); | 
|  | pr_info("RTC time: %2d:%02d:%02d, date: %02d/%02d/%02d\n", | 
|  | time.tm_hour, time.tm_min, time.tm_sec, | 
|  | time.tm_mon + 1, time.tm_mday, time.tm_year % 100); | 
|  | val = time.tm_year;				/* 100 years */ | 
|  | if (val > 100) | 
|  | val -= 100; | 
|  | val += time.tm_mon * 100;			/* 12 months */ | 
|  | val += (time.tm_mday-1) * 100 * 12;		/* 28 month-days */ | 
|  | val += time.tm_hour * 100 * 12 * 28;		/* 24 hours */ | 
|  | val += (time.tm_min / 3) * 100 * 12 * 28 * 24;	/* 20 3-minute intervals */ | 
|  | return val; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This is just the sdbm hash function with a user-supplied | 
|  | * seed and final size parameter. | 
|  | */ | 
|  | static unsigned int hash_string(unsigned int seed, const char *data, unsigned int mod) | 
|  | { | 
|  | unsigned char c; | 
|  | while ((c = *data++) != 0) { | 
|  | seed = (seed << 16) + (seed << 6) - seed + c; | 
|  | } | 
|  | return seed % mod; | 
|  | } | 
|  |  | 
|  | void set_trace_device(struct device *dev) | 
|  | { | 
|  | dev_hash_value = hash_string(DEVSEED, dev_name(dev), DEVHASH); | 
|  | } | 
|  | EXPORT_SYMBOL(set_trace_device); | 
|  |  | 
|  | /* | 
|  | * We could just take the "tracedata" index into the .tracedata | 
|  | * section instead. Generating a hash of the data gives us a | 
|  | * chance to work across kernel versions, and perhaps more | 
|  | * importantly it also gives us valid/invalid check (ie we will | 
|  | * likely not give totally bogus reports - if the hash matches, | 
|  | * it's not any guarantee, but it's a high _likelihood_ that | 
|  | * the match is valid). | 
|  | */ | 
|  | void generate_resume_trace(const void *tracedata, unsigned int user) | 
|  | { | 
|  | unsigned short lineno = *(unsigned short *)tracedata; | 
|  | const char *file = *(const char **)(tracedata + 2); | 
|  | unsigned int user_hash_value, file_hash_value; | 
|  |  | 
|  | user_hash_value = user % USERHASH; | 
|  | file_hash_value = hash_string(lineno, file, FILEHASH); | 
|  | set_magic_time(user_hash_value, file_hash_value, dev_hash_value); | 
|  | } | 
|  | EXPORT_SYMBOL(generate_resume_trace); | 
|  |  | 
|  | extern char __tracedata_start, __tracedata_end; | 
|  | static int show_file_hash(unsigned int value) | 
|  | { | 
|  | int match; | 
|  | char *tracedata; | 
|  |  | 
|  | match = 0; | 
|  | for (tracedata = &__tracedata_start ; tracedata < &__tracedata_end ; | 
|  | tracedata += 2 + sizeof(unsigned long)) { | 
|  | unsigned short lineno = *(unsigned short *)tracedata; | 
|  | const char *file = *(const char **)(tracedata + 2); | 
|  | unsigned int hash = hash_string(lineno, file, FILEHASH); | 
|  | if (hash != value) | 
|  | continue; | 
|  | pr_info("  hash matches %s:%u\n", file, lineno); | 
|  | match++; | 
|  | } | 
|  | return match; | 
|  | } | 
|  |  | 
|  | static int show_dev_hash(unsigned int value) | 
|  | { | 
|  | int match = 0; | 
|  | struct list_head *entry; | 
|  |  | 
|  | device_pm_lock(); | 
|  | entry = dpm_list.prev; | 
|  | while (entry != &dpm_list) { | 
|  | struct device * dev = to_device(entry); | 
|  | unsigned int hash = hash_string(DEVSEED, dev_name(dev), DEVHASH); | 
|  | if (hash == value) { | 
|  | dev_info(dev, "hash matches\n"); | 
|  | match++; | 
|  | } | 
|  | entry = entry->prev; | 
|  | } | 
|  | device_pm_unlock(); | 
|  | return match; | 
|  | } | 
|  |  | 
|  | static unsigned int hash_value_early_read; | 
|  |  | 
|  | int show_trace_dev_match(char *buf, size_t size) | 
|  | { | 
|  | unsigned int value = hash_value_early_read / (USERHASH * FILEHASH); | 
|  | int ret = 0; | 
|  | struct list_head *entry; | 
|  |  | 
|  | /* | 
|  | * It's possible that multiple devices will match the hash and we can't | 
|  | * tell which is the culprit, so it's best to output them all. | 
|  | */ | 
|  | device_pm_lock(); | 
|  | entry = dpm_list.prev; | 
|  | while (size && entry != &dpm_list) { | 
|  | struct device *dev = to_device(entry); | 
|  | unsigned int hash = hash_string(DEVSEED, dev_name(dev), | 
|  | DEVHASH); | 
|  | if (hash == value) { | 
|  | int len = snprintf(buf, size, "%s\n", | 
|  | dev_driver_string(dev)); | 
|  | if (len > size) | 
|  | len = size; | 
|  | buf += len; | 
|  | ret += len; | 
|  | size -= len; | 
|  | } | 
|  | entry = entry->prev; | 
|  | } | 
|  | device_pm_unlock(); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int early_resume_init(void) | 
|  | { | 
|  | hash_value_early_read = read_magic_time(); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int late_resume_init(void) | 
|  | { | 
|  | unsigned int val = hash_value_early_read; | 
|  | unsigned int user, file, dev; | 
|  |  | 
|  | user = val % USERHASH; | 
|  | val = val / USERHASH; | 
|  | file = val % FILEHASH; | 
|  | val = val / FILEHASH; | 
|  | dev = val /* % DEVHASH */; | 
|  |  | 
|  | pr_info("  Magic number: %d:%d:%d\n", user, file, dev); | 
|  | show_file_hash(file); | 
|  | show_dev_hash(dev); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | core_initcall(early_resume_init); | 
|  | late_initcall(late_resume_init); |