|  | /* net/atm/clip.c - RFC1577 Classical IP over ATM */ | 
|  |  | 
|  | /* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */ | 
|  |  | 
|  | #define pr_fmt(fmt) KBUILD_MODNAME ":%s: " fmt, __func__ | 
|  |  | 
|  | #include <linux/string.h> | 
|  | #include <linux/errno.h> | 
|  | #include <linux/kernel.h> /* for UINT_MAX */ | 
|  | #include <linux/module.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/netdevice.h> | 
|  | #include <linux/skbuff.h> | 
|  | #include <linux/wait.h> | 
|  | #include <linux/timer.h> | 
|  | #include <linux/if_arp.h> /* for some manifest constants */ | 
|  | #include <linux/notifier.h> | 
|  | #include <linux/atm.h> | 
|  | #include <linux/atmdev.h> | 
|  | #include <linux/atmclip.h> | 
|  | #include <linux/atmarp.h> | 
|  | #include <linux/capability.h> | 
|  | #include <linux/ip.h> /* for net/route.h */ | 
|  | #include <linux/in.h> /* for struct sockaddr_in */ | 
|  | #include <linux/if.h> /* for IFF_UP */ | 
|  | #include <linux/inetdevice.h> | 
|  | #include <linux/bitops.h> | 
|  | #include <linux/poison.h> | 
|  | #include <linux/proc_fs.h> | 
|  | #include <linux/seq_file.h> | 
|  | #include <linux/rcupdate.h> | 
|  | #include <linux/jhash.h> | 
|  | #include <linux/slab.h> | 
|  | #include <net/route.h> /* for struct rtable and routing */ | 
|  | #include <net/icmp.h> /* icmp_send */ | 
|  | #include <net/arp.h> | 
|  | #include <linux/param.h> /* for HZ */ | 
|  | #include <linux/uaccess.h> | 
|  | #include <asm/byteorder.h> /* for htons etc. */ | 
|  | #include <linux/atomic.h> | 
|  |  | 
|  | #include "common.h" | 
|  | #include "resources.h" | 
|  | #include <net/atmclip.h> | 
|  |  | 
|  | static struct net_device *clip_devs; | 
|  | static struct atm_vcc *atmarpd; | 
|  | static struct timer_list idle_timer; | 
|  | static const struct neigh_ops clip_neigh_ops; | 
|  |  | 
|  | static int to_atmarpd(enum atmarp_ctrl_type type, int itf, __be32 ip) | 
|  | { | 
|  | struct sock *sk; | 
|  | struct atmarp_ctrl *ctrl; | 
|  | struct sk_buff *skb; | 
|  |  | 
|  | pr_debug("(%d)\n", type); | 
|  | if (!atmarpd) | 
|  | return -EUNATCH; | 
|  | skb = alloc_skb(sizeof(struct atmarp_ctrl), GFP_ATOMIC); | 
|  | if (!skb) | 
|  | return -ENOMEM; | 
|  | ctrl = (struct atmarp_ctrl *)skb_put(skb, sizeof(struct atmarp_ctrl)); | 
|  | ctrl->type = type; | 
|  | ctrl->itf_num = itf; | 
|  | ctrl->ip = ip; | 
|  | atm_force_charge(atmarpd, skb->truesize); | 
|  |  | 
|  | sk = sk_atm(atmarpd); | 
|  | skb_queue_tail(&sk->sk_receive_queue, skb); | 
|  | sk->sk_data_ready(sk); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void link_vcc(struct clip_vcc *clip_vcc, struct atmarp_entry *entry) | 
|  | { | 
|  | pr_debug("%p to entry %p (neigh %p)\n", clip_vcc, entry, entry->neigh); | 
|  | clip_vcc->entry = entry; | 
|  | clip_vcc->xoff = 0;	/* @@@ may overrun buffer by one packet */ | 
|  | clip_vcc->next = entry->vccs; | 
|  | entry->vccs = clip_vcc; | 
|  | entry->neigh->used = jiffies; | 
|  | } | 
|  |  | 
|  | static void unlink_clip_vcc(struct clip_vcc *clip_vcc) | 
|  | { | 
|  | struct atmarp_entry *entry = clip_vcc->entry; | 
|  | struct clip_vcc **walk; | 
|  |  | 
|  | if (!entry) { | 
|  | pr_crit("!clip_vcc->entry (clip_vcc %p)\n", clip_vcc); | 
|  | return; | 
|  | } | 
|  | netif_tx_lock_bh(entry->neigh->dev);	/* block clip_start_xmit() */ | 
|  | entry->neigh->used = jiffies; | 
|  | for (walk = &entry->vccs; *walk; walk = &(*walk)->next) | 
|  | if (*walk == clip_vcc) { | 
|  | int error; | 
|  |  | 
|  | *walk = clip_vcc->next;	/* atomic */ | 
|  | clip_vcc->entry = NULL; | 
|  | if (clip_vcc->xoff) | 
|  | netif_wake_queue(entry->neigh->dev); | 
|  | if (entry->vccs) | 
|  | goto out; | 
|  | entry->expires = jiffies - 1; | 
|  | /* force resolution or expiration */ | 
|  | error = neigh_update(entry->neigh, NULL, NUD_NONE, | 
|  | NEIGH_UPDATE_F_ADMIN); | 
|  | if (error) | 
|  | pr_crit("neigh_update failed with %d\n", error); | 
|  | goto out; | 
|  | } | 
|  | pr_crit("ATMARP: failed (entry %p, vcc 0x%p)\n", entry, clip_vcc); | 
|  | out: | 
|  | netif_tx_unlock_bh(entry->neigh->dev); | 
|  | } | 
|  |  | 
|  | /* The neighbour entry n->lock is held. */ | 
|  | static int neigh_check_cb(struct neighbour *n) | 
|  | { | 
|  | struct atmarp_entry *entry = neighbour_priv(n); | 
|  | struct clip_vcc *cv; | 
|  |  | 
|  | if (n->ops != &clip_neigh_ops) | 
|  | return 0; | 
|  | for (cv = entry->vccs; cv; cv = cv->next) { | 
|  | unsigned long exp = cv->last_use + cv->idle_timeout; | 
|  |  | 
|  | if (cv->idle_timeout && time_after(jiffies, exp)) { | 
|  | pr_debug("releasing vcc %p->%p of entry %p\n", | 
|  | cv, cv->vcc, entry); | 
|  | vcc_release_async(cv->vcc, -ETIMEDOUT); | 
|  | } | 
|  | } | 
|  |  | 
|  | if (entry->vccs || time_before(jiffies, entry->expires)) | 
|  | return 0; | 
|  |  | 
|  | if (atomic_read(&n->refcnt) > 1) { | 
|  | struct sk_buff *skb; | 
|  |  | 
|  | pr_debug("destruction postponed with ref %d\n", | 
|  | atomic_read(&n->refcnt)); | 
|  |  | 
|  | while ((skb = skb_dequeue(&n->arp_queue)) != NULL) | 
|  | dev_kfree_skb(skb); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | pr_debug("expired neigh %p\n", n); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | static void idle_timer_check(unsigned long dummy) | 
|  | { | 
|  | write_lock(&arp_tbl.lock); | 
|  | __neigh_for_each_release(&arp_tbl, neigh_check_cb); | 
|  | mod_timer(&idle_timer, jiffies + CLIP_CHECK_INTERVAL * HZ); | 
|  | write_unlock(&arp_tbl.lock); | 
|  | } | 
|  |  | 
|  | static int clip_arp_rcv(struct sk_buff *skb) | 
|  | { | 
|  | struct atm_vcc *vcc; | 
|  |  | 
|  | pr_debug("\n"); | 
|  | vcc = ATM_SKB(skb)->vcc; | 
|  | if (!vcc || !atm_charge(vcc, skb->truesize)) { | 
|  | dev_kfree_skb_any(skb); | 
|  | return 0; | 
|  | } | 
|  | pr_debug("pushing to %p\n", vcc); | 
|  | pr_debug("using %p\n", CLIP_VCC(vcc)->old_push); | 
|  | CLIP_VCC(vcc)->old_push(vcc, skb); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const unsigned char llc_oui[] = { | 
|  | 0xaa,	/* DSAP: non-ISO */ | 
|  | 0xaa,	/* SSAP: non-ISO */ | 
|  | 0x03,	/* Ctrl: Unnumbered Information Command PDU */ | 
|  | 0x00,	/* OUI: EtherType */ | 
|  | 0x00, | 
|  | 0x00 | 
|  | }; | 
|  |  | 
|  | static void clip_push(struct atm_vcc *vcc, struct sk_buff *skb) | 
|  | { | 
|  | struct clip_vcc *clip_vcc = CLIP_VCC(vcc); | 
|  |  | 
|  | pr_debug("\n"); | 
|  |  | 
|  | if (!clip_devs) { | 
|  | atm_return(vcc, skb->truesize); | 
|  | kfree_skb(skb); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (!skb) { | 
|  | pr_debug("removing VCC %p\n", clip_vcc); | 
|  | if (clip_vcc->entry) | 
|  | unlink_clip_vcc(clip_vcc); | 
|  | clip_vcc->old_push(vcc, NULL);	/* pass on the bad news */ | 
|  | kfree(clip_vcc); | 
|  | return; | 
|  | } | 
|  | atm_return(vcc, skb->truesize); | 
|  | skb->dev = clip_vcc->entry ? clip_vcc->entry->neigh->dev : clip_devs; | 
|  | /* clip_vcc->entry == NULL if we don't have an IP address yet */ | 
|  | if (!skb->dev) { | 
|  | dev_kfree_skb_any(skb); | 
|  | return; | 
|  | } | 
|  | ATM_SKB(skb)->vcc = vcc; | 
|  | skb_reset_mac_header(skb); | 
|  | if (!clip_vcc->encap || | 
|  | skb->len < RFC1483LLC_LEN || | 
|  | memcmp(skb->data, llc_oui, sizeof(llc_oui))) | 
|  | skb->protocol = htons(ETH_P_IP); | 
|  | else { | 
|  | skb->protocol = ((__be16 *)skb->data)[3]; | 
|  | skb_pull(skb, RFC1483LLC_LEN); | 
|  | if (skb->protocol == htons(ETH_P_ARP)) { | 
|  | skb->dev->stats.rx_packets++; | 
|  | skb->dev->stats.rx_bytes += skb->len; | 
|  | clip_arp_rcv(skb); | 
|  | return; | 
|  | } | 
|  | } | 
|  | clip_vcc->last_use = jiffies; | 
|  | skb->dev->stats.rx_packets++; | 
|  | skb->dev->stats.rx_bytes += skb->len; | 
|  | memset(ATM_SKB(skb), 0, sizeof(struct atm_skb_data)); | 
|  | netif_rx(skb); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Note: these spinlocks _must_not_ block on non-SMP. The only goal is that | 
|  | * clip_pop is atomic with respect to the critical section in clip_start_xmit. | 
|  | */ | 
|  |  | 
|  | static void clip_pop(struct atm_vcc *vcc, struct sk_buff *skb) | 
|  | { | 
|  | struct clip_vcc *clip_vcc = CLIP_VCC(vcc); | 
|  | struct net_device *dev = skb->dev; | 
|  | int old; | 
|  | unsigned long flags; | 
|  |  | 
|  | pr_debug("(vcc %p)\n", vcc); | 
|  | clip_vcc->old_pop(vcc, skb); | 
|  | /* skb->dev == NULL in outbound ARP packets */ | 
|  | if (!dev) | 
|  | return; | 
|  | spin_lock_irqsave(&PRIV(dev)->xoff_lock, flags); | 
|  | if (atm_may_send(vcc, 0)) { | 
|  | old = xchg(&clip_vcc->xoff, 0); | 
|  | if (old) | 
|  | netif_wake_queue(dev); | 
|  | } | 
|  | spin_unlock_irqrestore(&PRIV(dev)->xoff_lock, flags); | 
|  | } | 
|  |  | 
|  | static void clip_neigh_solicit(struct neighbour *neigh, struct sk_buff *skb) | 
|  | { | 
|  | __be32 *ip = (__be32 *) neigh->primary_key; | 
|  |  | 
|  | pr_debug("(neigh %p, skb %p)\n", neigh, skb); | 
|  | to_atmarpd(act_need, PRIV(neigh->dev)->number, *ip); | 
|  | } | 
|  |  | 
|  | static void clip_neigh_error(struct neighbour *neigh, struct sk_buff *skb) | 
|  | { | 
|  | #ifndef CONFIG_ATM_CLIP_NO_ICMP | 
|  | icmp_send(skb, ICMP_DEST_UNREACH, ICMP_HOST_UNREACH, 0); | 
|  | #endif | 
|  | kfree_skb(skb); | 
|  | } | 
|  |  | 
|  | static const struct neigh_ops clip_neigh_ops = { | 
|  | .family =		AF_INET, | 
|  | .solicit =		clip_neigh_solicit, | 
|  | .error_report =		clip_neigh_error, | 
|  | .output =		neigh_direct_output, | 
|  | .connected_output =	neigh_direct_output, | 
|  | }; | 
|  |  | 
|  | static int clip_constructor(struct neighbour *neigh) | 
|  | { | 
|  | struct atmarp_entry *entry = neighbour_priv(neigh); | 
|  |  | 
|  | if (neigh->tbl->family != AF_INET) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (neigh->type != RTN_UNICAST) | 
|  | return -EINVAL; | 
|  |  | 
|  | neigh->nud_state = NUD_NONE; | 
|  | neigh->ops = &clip_neigh_ops; | 
|  | neigh->output = neigh->ops->output; | 
|  | entry->neigh = neigh; | 
|  | entry->vccs = NULL; | 
|  | entry->expires = jiffies - 1; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* @@@ copy bh locking from arp.c -- need to bh-enable atm code before */ | 
|  |  | 
|  | /* | 
|  | * We play with the resolve flag: 0 and 1 have the usual meaning, but -1 means | 
|  | * to allocate the neighbour entry but not to ask atmarpd for resolution. Also, | 
|  | * don't increment the usage count. This is used to create entries in | 
|  | * clip_setentry. | 
|  | */ | 
|  |  | 
|  | static int clip_encap(struct atm_vcc *vcc, int mode) | 
|  | { | 
|  | CLIP_VCC(vcc)->encap = mode; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static netdev_tx_t clip_start_xmit(struct sk_buff *skb, | 
|  | struct net_device *dev) | 
|  | { | 
|  | struct clip_priv *clip_priv = PRIV(dev); | 
|  | struct dst_entry *dst = skb_dst(skb); | 
|  | struct atmarp_entry *entry; | 
|  | struct neighbour *n; | 
|  | struct atm_vcc *vcc; | 
|  | struct rtable *rt; | 
|  | __be32 *daddr; | 
|  | int old; | 
|  | unsigned long flags; | 
|  |  | 
|  | pr_debug("(skb %p)\n", skb); | 
|  | if (!dst) { | 
|  | pr_err("skb_dst(skb) == NULL\n"); | 
|  | dev_kfree_skb(skb); | 
|  | dev->stats.tx_dropped++; | 
|  | return NETDEV_TX_OK; | 
|  | } | 
|  | rt = (struct rtable *) dst; | 
|  | if (rt->rt_gateway) | 
|  | daddr = &rt->rt_gateway; | 
|  | else | 
|  | daddr = &ip_hdr(skb)->daddr; | 
|  | n = dst_neigh_lookup(dst, daddr); | 
|  | if (!n) { | 
|  | pr_err("NO NEIGHBOUR !\n"); | 
|  | dev_kfree_skb(skb); | 
|  | dev->stats.tx_dropped++; | 
|  | return NETDEV_TX_OK; | 
|  | } | 
|  | entry = neighbour_priv(n); | 
|  | if (!entry->vccs) { | 
|  | if (time_after(jiffies, entry->expires)) { | 
|  | /* should be resolved */ | 
|  | entry->expires = jiffies + ATMARP_RETRY_DELAY * HZ; | 
|  | to_atmarpd(act_need, PRIV(dev)->number, *((__be32 *)n->primary_key)); | 
|  | } | 
|  | if (entry->neigh->arp_queue.qlen < ATMARP_MAX_UNRES_PACKETS) | 
|  | skb_queue_tail(&entry->neigh->arp_queue, skb); | 
|  | else { | 
|  | dev_kfree_skb(skb); | 
|  | dev->stats.tx_dropped++; | 
|  | } | 
|  | goto out_release_neigh; | 
|  | } | 
|  | pr_debug("neigh %p, vccs %p\n", entry, entry->vccs); | 
|  | ATM_SKB(skb)->vcc = vcc = entry->vccs->vcc; | 
|  | pr_debug("using neighbour %p, vcc %p\n", n, vcc); | 
|  | if (entry->vccs->encap) { | 
|  | void *here; | 
|  |  | 
|  | here = skb_push(skb, RFC1483LLC_LEN); | 
|  | memcpy(here, llc_oui, sizeof(llc_oui)); | 
|  | ((__be16 *) here)[3] = skb->protocol; | 
|  | } | 
|  | atomic_add(skb->truesize, &sk_atm(vcc)->sk_wmem_alloc); | 
|  | ATM_SKB(skb)->atm_options = vcc->atm_options; | 
|  | entry->vccs->last_use = jiffies; | 
|  | pr_debug("atm_skb(%p)->vcc(%p)->dev(%p)\n", skb, vcc, vcc->dev); | 
|  | old = xchg(&entry->vccs->xoff, 1);	/* assume XOFF ... */ | 
|  | if (old) { | 
|  | pr_warn("XOFF->XOFF transition\n"); | 
|  | goto out_release_neigh; | 
|  | } | 
|  | dev->stats.tx_packets++; | 
|  | dev->stats.tx_bytes += skb->len; | 
|  | vcc->send(vcc, skb); | 
|  | if (atm_may_send(vcc, 0)) { | 
|  | entry->vccs->xoff = 0; | 
|  | goto out_release_neigh; | 
|  | } | 
|  | spin_lock_irqsave(&clip_priv->xoff_lock, flags); | 
|  | netif_stop_queue(dev);	/* XOFF -> throttle immediately */ | 
|  | barrier(); | 
|  | if (!entry->vccs->xoff) | 
|  | netif_start_queue(dev); | 
|  | /* Oh, we just raced with clip_pop. netif_start_queue should be | 
|  | good enough, because nothing should really be asleep because | 
|  | of the brief netif_stop_queue. If this isn't true or if it | 
|  | changes, use netif_wake_queue instead. */ | 
|  | spin_unlock_irqrestore(&clip_priv->xoff_lock, flags); | 
|  | out_release_neigh: | 
|  | neigh_release(n); | 
|  | return NETDEV_TX_OK; | 
|  | } | 
|  |  | 
|  | static int clip_mkip(struct atm_vcc *vcc, int timeout) | 
|  | { | 
|  | struct clip_vcc *clip_vcc; | 
|  |  | 
|  | if (!vcc->push) | 
|  | return -EBADFD; | 
|  | clip_vcc = kmalloc(sizeof(struct clip_vcc), GFP_KERNEL); | 
|  | if (!clip_vcc) | 
|  | return -ENOMEM; | 
|  | pr_debug("%p vcc %p\n", clip_vcc, vcc); | 
|  | clip_vcc->vcc = vcc; | 
|  | vcc->user_back = clip_vcc; | 
|  | set_bit(ATM_VF_IS_CLIP, &vcc->flags); | 
|  | clip_vcc->entry = NULL; | 
|  | clip_vcc->xoff = 0; | 
|  | clip_vcc->encap = 1; | 
|  | clip_vcc->last_use = jiffies; | 
|  | clip_vcc->idle_timeout = timeout * HZ; | 
|  | clip_vcc->old_push = vcc->push; | 
|  | clip_vcc->old_pop = vcc->pop; | 
|  | vcc->push = clip_push; | 
|  | vcc->pop = clip_pop; | 
|  |  | 
|  | /* re-process everything received between connection setup and MKIP */ | 
|  | vcc_process_recv_queue(vcc); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int clip_setentry(struct atm_vcc *vcc, __be32 ip) | 
|  | { | 
|  | struct neighbour *neigh; | 
|  | struct atmarp_entry *entry; | 
|  | int error; | 
|  | struct clip_vcc *clip_vcc; | 
|  | struct rtable *rt; | 
|  |  | 
|  | if (vcc->push != clip_push) { | 
|  | pr_warn("non-CLIP VCC\n"); | 
|  | return -EBADF; | 
|  | } | 
|  | clip_vcc = CLIP_VCC(vcc); | 
|  | if (!ip) { | 
|  | if (!clip_vcc->entry) { | 
|  | pr_err("hiding hidden ATMARP entry\n"); | 
|  | return 0; | 
|  | } | 
|  | pr_debug("remove\n"); | 
|  | unlink_clip_vcc(clip_vcc); | 
|  | return 0; | 
|  | } | 
|  | rt = ip_route_output(&init_net, ip, 0, 1, 0); | 
|  | if (IS_ERR(rt)) | 
|  | return PTR_ERR(rt); | 
|  | neigh = __neigh_lookup(&arp_tbl, &ip, rt->dst.dev, 1); | 
|  | ip_rt_put(rt); | 
|  | if (!neigh) | 
|  | return -ENOMEM; | 
|  | entry = neighbour_priv(neigh); | 
|  | if (entry != clip_vcc->entry) { | 
|  | if (!clip_vcc->entry) | 
|  | pr_debug("add\n"); | 
|  | else { | 
|  | pr_debug("update\n"); | 
|  | unlink_clip_vcc(clip_vcc); | 
|  | } | 
|  | link_vcc(clip_vcc, entry); | 
|  | } | 
|  | error = neigh_update(neigh, llc_oui, NUD_PERMANENT, | 
|  | NEIGH_UPDATE_F_OVERRIDE | NEIGH_UPDATE_F_ADMIN); | 
|  | neigh_release(neigh); | 
|  | return error; | 
|  | } | 
|  |  | 
|  | static const struct net_device_ops clip_netdev_ops = { | 
|  | .ndo_start_xmit		= clip_start_xmit, | 
|  | .ndo_neigh_construct	= clip_constructor, | 
|  | }; | 
|  |  | 
|  | static void clip_setup(struct net_device *dev) | 
|  | { | 
|  | dev->netdev_ops = &clip_netdev_ops; | 
|  | dev->type = ARPHRD_ATM; | 
|  | dev->neigh_priv_len = sizeof(struct atmarp_entry); | 
|  | dev->hard_header_len = RFC1483LLC_LEN; | 
|  | dev->mtu = RFC1626_MTU; | 
|  | dev->tx_queue_len = 100;	/* "normal" queue (packets) */ | 
|  | /* When using a "real" qdisc, the qdisc determines the queue */ | 
|  | /* length. tx_queue_len is only used for the default case, */ | 
|  | /* without any more elaborate queuing. 100 is a reasonable */ | 
|  | /* compromise between decent burst-tolerance and protection */ | 
|  | /* against memory hogs. */ | 
|  | netif_keep_dst(dev); | 
|  | } | 
|  |  | 
|  | static int clip_create(int number) | 
|  | { | 
|  | struct net_device *dev; | 
|  | struct clip_priv *clip_priv; | 
|  | int error; | 
|  |  | 
|  | if (number != -1) { | 
|  | for (dev = clip_devs; dev; dev = PRIV(dev)->next) | 
|  | if (PRIV(dev)->number == number) | 
|  | return -EEXIST; | 
|  | } else { | 
|  | number = 0; | 
|  | for (dev = clip_devs; dev; dev = PRIV(dev)->next) | 
|  | if (PRIV(dev)->number >= number) | 
|  | number = PRIV(dev)->number + 1; | 
|  | } | 
|  | dev = alloc_netdev(sizeof(struct clip_priv), "", NET_NAME_UNKNOWN, | 
|  | clip_setup); | 
|  | if (!dev) | 
|  | return -ENOMEM; | 
|  | clip_priv = PRIV(dev); | 
|  | sprintf(dev->name, "atm%d", number); | 
|  | spin_lock_init(&clip_priv->xoff_lock); | 
|  | clip_priv->number = number; | 
|  | error = register_netdev(dev); | 
|  | if (error) { | 
|  | free_netdev(dev); | 
|  | return error; | 
|  | } | 
|  | clip_priv->next = clip_devs; | 
|  | clip_devs = dev; | 
|  | pr_debug("registered (net:%s)\n", dev->name); | 
|  | return number; | 
|  | } | 
|  |  | 
|  | static int clip_device_event(struct notifier_block *this, unsigned long event, | 
|  | void *ptr) | 
|  | { | 
|  | struct net_device *dev = netdev_notifier_info_to_dev(ptr); | 
|  |  | 
|  | if (!net_eq(dev_net(dev), &init_net)) | 
|  | return NOTIFY_DONE; | 
|  |  | 
|  | if (event == NETDEV_UNREGISTER) | 
|  | return NOTIFY_DONE; | 
|  |  | 
|  | /* ignore non-CLIP devices */ | 
|  | if (dev->type != ARPHRD_ATM || dev->netdev_ops != &clip_netdev_ops) | 
|  | return NOTIFY_DONE; | 
|  |  | 
|  | switch (event) { | 
|  | case NETDEV_UP: | 
|  | pr_debug("NETDEV_UP\n"); | 
|  | to_atmarpd(act_up, PRIV(dev)->number, 0); | 
|  | break; | 
|  | case NETDEV_GOING_DOWN: | 
|  | pr_debug("NETDEV_DOWN\n"); | 
|  | to_atmarpd(act_down, PRIV(dev)->number, 0); | 
|  | break; | 
|  | case NETDEV_CHANGE: | 
|  | case NETDEV_CHANGEMTU: | 
|  | pr_debug("NETDEV_CHANGE*\n"); | 
|  | to_atmarpd(act_change, PRIV(dev)->number, 0); | 
|  | break; | 
|  | } | 
|  | return NOTIFY_DONE; | 
|  | } | 
|  |  | 
|  | static int clip_inet_event(struct notifier_block *this, unsigned long event, | 
|  | void *ifa) | 
|  | { | 
|  | struct in_device *in_dev; | 
|  | struct netdev_notifier_info info; | 
|  |  | 
|  | in_dev = ((struct in_ifaddr *)ifa)->ifa_dev; | 
|  | /* | 
|  | * Transitions are of the down-change-up type, so it's sufficient to | 
|  | * handle the change on up. | 
|  | */ | 
|  | if (event != NETDEV_UP) | 
|  | return NOTIFY_DONE; | 
|  | netdev_notifier_info_init(&info, in_dev->dev); | 
|  | return clip_device_event(this, NETDEV_CHANGE, &info); | 
|  | } | 
|  |  | 
|  | static struct notifier_block clip_dev_notifier = { | 
|  | .notifier_call = clip_device_event, | 
|  | }; | 
|  |  | 
|  |  | 
|  |  | 
|  | static struct notifier_block clip_inet_notifier = { | 
|  | .notifier_call = clip_inet_event, | 
|  | }; | 
|  |  | 
|  |  | 
|  |  | 
|  | static void atmarpd_close(struct atm_vcc *vcc) | 
|  | { | 
|  | pr_debug("\n"); | 
|  |  | 
|  | rtnl_lock(); | 
|  | atmarpd = NULL; | 
|  | skb_queue_purge(&sk_atm(vcc)->sk_receive_queue); | 
|  | rtnl_unlock(); | 
|  |  | 
|  | pr_debug("(done)\n"); | 
|  | module_put(THIS_MODULE); | 
|  | } | 
|  |  | 
|  | static struct atmdev_ops atmarpd_dev_ops = { | 
|  | .close = atmarpd_close | 
|  | }; | 
|  |  | 
|  |  | 
|  | static struct atm_dev atmarpd_dev = { | 
|  | .ops =			&atmarpd_dev_ops, | 
|  | .type =			"arpd", | 
|  | .number = 		999, | 
|  | .lock =			__SPIN_LOCK_UNLOCKED(atmarpd_dev.lock) | 
|  | }; | 
|  |  | 
|  |  | 
|  | static int atm_init_atmarp(struct atm_vcc *vcc) | 
|  | { | 
|  | rtnl_lock(); | 
|  | if (atmarpd) { | 
|  | rtnl_unlock(); | 
|  | return -EADDRINUSE; | 
|  | } | 
|  |  | 
|  | mod_timer(&idle_timer, jiffies + CLIP_CHECK_INTERVAL * HZ); | 
|  |  | 
|  | atmarpd = vcc; | 
|  | set_bit(ATM_VF_META, &vcc->flags); | 
|  | set_bit(ATM_VF_READY, &vcc->flags); | 
|  | /* allow replies and avoid getting closed if signaling dies */ | 
|  | vcc->dev = &atmarpd_dev; | 
|  | vcc_insert_socket(sk_atm(vcc)); | 
|  | vcc->push = NULL; | 
|  | vcc->pop = NULL; /* crash */ | 
|  | vcc->push_oam = NULL; /* crash */ | 
|  | rtnl_unlock(); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int clip_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg) | 
|  | { | 
|  | struct atm_vcc *vcc = ATM_SD(sock); | 
|  | int err = 0; | 
|  |  | 
|  | switch (cmd) { | 
|  | case SIOCMKCLIP: | 
|  | case ATMARPD_CTRL: | 
|  | case ATMARP_MKIP: | 
|  | case ATMARP_SETENTRY: | 
|  | case ATMARP_ENCAP: | 
|  | if (!capable(CAP_NET_ADMIN)) | 
|  | return -EPERM; | 
|  | break; | 
|  | default: | 
|  | return -ENOIOCTLCMD; | 
|  | } | 
|  |  | 
|  | switch (cmd) { | 
|  | case SIOCMKCLIP: | 
|  | err = clip_create(arg); | 
|  | break; | 
|  | case ATMARPD_CTRL: | 
|  | err = atm_init_atmarp(vcc); | 
|  | if (!err) { | 
|  | sock->state = SS_CONNECTED; | 
|  | __module_get(THIS_MODULE); | 
|  | } | 
|  | break; | 
|  | case ATMARP_MKIP: | 
|  | err = clip_mkip(vcc, arg); | 
|  | break; | 
|  | case ATMARP_SETENTRY: | 
|  | err = clip_setentry(vcc, (__force __be32)arg); | 
|  | break; | 
|  | case ATMARP_ENCAP: | 
|  | err = clip_encap(vcc, arg); | 
|  | break; | 
|  | } | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static struct atm_ioctl clip_ioctl_ops = { | 
|  | .owner = THIS_MODULE, | 
|  | .ioctl = clip_ioctl, | 
|  | }; | 
|  |  | 
|  | #ifdef CONFIG_PROC_FS | 
|  |  | 
|  | static void svc_addr(struct seq_file *seq, struct sockaddr_atmsvc *addr) | 
|  | { | 
|  | static int code[] = { 1, 2, 10, 6, 1, 0 }; | 
|  | static int e164[] = { 1, 8, 4, 6, 1, 0 }; | 
|  |  | 
|  | if (*addr->sas_addr.pub) { | 
|  | seq_printf(seq, "%s", addr->sas_addr.pub); | 
|  | if (*addr->sas_addr.prv) | 
|  | seq_putc(seq, '+'); | 
|  | } else if (!*addr->sas_addr.prv) { | 
|  | seq_printf(seq, "%s", "(none)"); | 
|  | return; | 
|  | } | 
|  | if (*addr->sas_addr.prv) { | 
|  | unsigned char *prv = addr->sas_addr.prv; | 
|  | int *fields; | 
|  | int i, j; | 
|  |  | 
|  | fields = *prv == ATM_AFI_E164 ? e164 : code; | 
|  | for (i = 0; fields[i]; i++) { | 
|  | for (j = fields[i]; j; j--) | 
|  | seq_printf(seq, "%02X", *prv++); | 
|  | if (fields[i + 1]) | 
|  | seq_putc(seq, '.'); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /* This means the neighbour entry has no attached VCC objects. */ | 
|  | #define SEQ_NO_VCC_TOKEN	((void *) 2) | 
|  |  | 
|  | static void atmarp_info(struct seq_file *seq, struct neighbour *n, | 
|  | struct atmarp_entry *entry, struct clip_vcc *clip_vcc) | 
|  | { | 
|  | struct net_device *dev = n->dev; | 
|  | unsigned long exp; | 
|  | char buf[17]; | 
|  | int svc, llc, off; | 
|  |  | 
|  | svc = ((clip_vcc == SEQ_NO_VCC_TOKEN) || | 
|  | (sk_atm(clip_vcc->vcc)->sk_family == AF_ATMSVC)); | 
|  |  | 
|  | llc = ((clip_vcc == SEQ_NO_VCC_TOKEN) || clip_vcc->encap); | 
|  |  | 
|  | if (clip_vcc == SEQ_NO_VCC_TOKEN) | 
|  | exp = entry->neigh->used; | 
|  | else | 
|  | exp = clip_vcc->last_use; | 
|  |  | 
|  | exp = (jiffies - exp) / HZ; | 
|  |  | 
|  | seq_printf(seq, "%-6s%-4s%-4s%5ld ", | 
|  | dev->name, svc ? "SVC" : "PVC", llc ? "LLC" : "NULL", exp); | 
|  |  | 
|  | off = scnprintf(buf, sizeof(buf) - 1, "%pI4", n->primary_key); | 
|  | while (off < 16) | 
|  | buf[off++] = ' '; | 
|  | buf[off] = '\0'; | 
|  | seq_printf(seq, "%s", buf); | 
|  |  | 
|  | if (clip_vcc == SEQ_NO_VCC_TOKEN) { | 
|  | if (time_before(jiffies, entry->expires)) | 
|  | seq_printf(seq, "(resolving)\n"); | 
|  | else | 
|  | seq_printf(seq, "(expired, ref %d)\n", | 
|  | atomic_read(&entry->neigh->refcnt)); | 
|  | } else if (!svc) { | 
|  | seq_printf(seq, "%d.%d.%d\n", | 
|  | clip_vcc->vcc->dev->number, | 
|  | clip_vcc->vcc->vpi, clip_vcc->vcc->vci); | 
|  | } else { | 
|  | svc_addr(seq, &clip_vcc->vcc->remote); | 
|  | seq_putc(seq, '\n'); | 
|  | } | 
|  | } | 
|  |  | 
|  | struct clip_seq_state { | 
|  | /* This member must be first. */ | 
|  | struct neigh_seq_state ns; | 
|  |  | 
|  | /* Local to clip specific iteration. */ | 
|  | struct clip_vcc *vcc; | 
|  | }; | 
|  |  | 
|  | static struct clip_vcc *clip_seq_next_vcc(struct atmarp_entry *e, | 
|  | struct clip_vcc *curr) | 
|  | { | 
|  | if (!curr) { | 
|  | curr = e->vccs; | 
|  | if (!curr) | 
|  | return SEQ_NO_VCC_TOKEN; | 
|  | return curr; | 
|  | } | 
|  | if (curr == SEQ_NO_VCC_TOKEN) | 
|  | return NULL; | 
|  |  | 
|  | curr = curr->next; | 
|  |  | 
|  | return curr; | 
|  | } | 
|  |  | 
|  | static void *clip_seq_vcc_walk(struct clip_seq_state *state, | 
|  | struct atmarp_entry *e, loff_t * pos) | 
|  | { | 
|  | struct clip_vcc *vcc = state->vcc; | 
|  |  | 
|  | vcc = clip_seq_next_vcc(e, vcc); | 
|  | if (vcc && pos != NULL) { | 
|  | while (*pos) { | 
|  | vcc = clip_seq_next_vcc(e, vcc); | 
|  | if (!vcc) | 
|  | break; | 
|  | --(*pos); | 
|  | } | 
|  | } | 
|  | state->vcc = vcc; | 
|  |  | 
|  | return vcc; | 
|  | } | 
|  |  | 
|  | static void *clip_seq_sub_iter(struct neigh_seq_state *_state, | 
|  | struct neighbour *n, loff_t * pos) | 
|  | { | 
|  | struct clip_seq_state *state = (struct clip_seq_state *)_state; | 
|  |  | 
|  | if (n->dev->type != ARPHRD_ATM) | 
|  | return NULL; | 
|  |  | 
|  | return clip_seq_vcc_walk(state, neighbour_priv(n), pos); | 
|  | } | 
|  |  | 
|  | static void *clip_seq_start(struct seq_file *seq, loff_t * pos) | 
|  | { | 
|  | struct clip_seq_state *state = seq->private; | 
|  | state->ns.neigh_sub_iter = clip_seq_sub_iter; | 
|  | return neigh_seq_start(seq, pos, &arp_tbl, NEIGH_SEQ_NEIGH_ONLY); | 
|  | } | 
|  |  | 
|  | static int clip_seq_show(struct seq_file *seq, void *v) | 
|  | { | 
|  | static char atm_arp_banner[] = | 
|  | "IPitf TypeEncp Idle IP address      ATM address\n"; | 
|  |  | 
|  | if (v == SEQ_START_TOKEN) { | 
|  | seq_puts(seq, atm_arp_banner); | 
|  | } else { | 
|  | struct clip_seq_state *state = seq->private; | 
|  | struct clip_vcc *vcc = state->vcc; | 
|  | struct neighbour *n = v; | 
|  |  | 
|  | atmarp_info(seq, n, neighbour_priv(n), vcc); | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct seq_operations arp_seq_ops = { | 
|  | .start	= clip_seq_start, | 
|  | .next	= neigh_seq_next, | 
|  | .stop	= neigh_seq_stop, | 
|  | .show	= clip_seq_show, | 
|  | }; | 
|  |  | 
|  | static int arp_seq_open(struct inode *inode, struct file *file) | 
|  | { | 
|  | return seq_open_net(inode, file, &arp_seq_ops, | 
|  | sizeof(struct clip_seq_state)); | 
|  | } | 
|  |  | 
|  | static const struct file_operations arp_seq_fops = { | 
|  | .open		= arp_seq_open, | 
|  | .read		= seq_read, | 
|  | .llseek		= seq_lseek, | 
|  | .release	= seq_release_net, | 
|  | .owner		= THIS_MODULE | 
|  | }; | 
|  | #endif | 
|  |  | 
|  | static void atm_clip_exit_noproc(void); | 
|  |  | 
|  | static int __init atm_clip_init(void) | 
|  | { | 
|  | register_atm_ioctl(&clip_ioctl_ops); | 
|  | register_netdevice_notifier(&clip_dev_notifier); | 
|  | register_inetaddr_notifier(&clip_inet_notifier); | 
|  |  | 
|  | setup_timer(&idle_timer, idle_timer_check, 0); | 
|  |  | 
|  | #ifdef CONFIG_PROC_FS | 
|  | { | 
|  | struct proc_dir_entry *p; | 
|  |  | 
|  | p = proc_create("arp", S_IRUGO, atm_proc_root, &arp_seq_fops); | 
|  | if (!p) { | 
|  | pr_err("Unable to initialize /proc/net/atm/arp\n"); | 
|  | atm_clip_exit_noproc(); | 
|  | return -ENOMEM; | 
|  | } | 
|  | } | 
|  | #endif | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void atm_clip_exit_noproc(void) | 
|  | { | 
|  | struct net_device *dev, *next; | 
|  |  | 
|  | unregister_inetaddr_notifier(&clip_inet_notifier); | 
|  | unregister_netdevice_notifier(&clip_dev_notifier); | 
|  |  | 
|  | deregister_atm_ioctl(&clip_ioctl_ops); | 
|  |  | 
|  | /* First, stop the idle timer, so it stops banging | 
|  | * on the table. | 
|  | */ | 
|  | del_timer_sync(&idle_timer); | 
|  |  | 
|  | dev = clip_devs; | 
|  | while (dev) { | 
|  | next = PRIV(dev)->next; | 
|  | unregister_netdev(dev); | 
|  | free_netdev(dev); | 
|  | dev = next; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void __exit atm_clip_exit(void) | 
|  | { | 
|  | remove_proc_entry("arp", atm_proc_root); | 
|  |  | 
|  | atm_clip_exit_noproc(); | 
|  | } | 
|  |  | 
|  | module_init(atm_clip_init); | 
|  | module_exit(atm_clip_exit); | 
|  | MODULE_AUTHOR("Werner Almesberger"); | 
|  | MODULE_DESCRIPTION("Classical/IP over ATM interface"); | 
|  | MODULE_LICENSE("GPL"); |