| /* | 
 |  * Copyright (C) 2006 Juergen Beisert, Pengutronix | 
 |  * Copyright (C) 2008 Guennadi Liakhovetski, Pengutronix | 
 |  * Copyright (C) 2009 Wolfram Sang, Pengutronix | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License version 2 as | 
 |  * published by the Free Software Foundation. | 
 |  * | 
 |  * Check max730x.c for further details. | 
 |  */ | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/init.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/mutex.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/spi/spi.h> | 
 | #include <linux/spi/max7301.h> | 
 |  | 
 | /* A write to the MAX7301 means one message with one transfer */ | 
 | static int max7301_spi_write(struct device *dev, unsigned int reg, | 
 | 				unsigned int val) | 
 | { | 
 | 	struct spi_device *spi = to_spi_device(dev); | 
 | 	u16 word = ((reg & 0x7F) << 8) | (val & 0xFF); | 
 |  | 
 | 	return spi_write(spi, (const u8 *)&word, sizeof(word)); | 
 | } | 
 |  | 
 | /* A read from the MAX7301 means two transfers; here, one message each */ | 
 |  | 
 | static int max7301_spi_read(struct device *dev, unsigned int reg) | 
 | { | 
 | 	int ret; | 
 | 	u16 word; | 
 | 	struct spi_device *spi = to_spi_device(dev); | 
 |  | 
 | 	word = 0x8000 | (reg << 8); | 
 | 	ret = spi_write(spi, (const u8 *)&word, sizeof(word)); | 
 | 	if (ret) | 
 | 		return ret; | 
 | 	/* | 
 | 	 * This relies on the fact, that a transfer with NULL tx_buf shifts out | 
 | 	 * zero bytes (=NOOP for MAX7301) | 
 | 	 */ | 
 | 	ret = spi_read(spi, (u8 *)&word, sizeof(word)); | 
 | 	if (ret) | 
 | 		return ret; | 
 | 	return word & 0xff; | 
 | } | 
 |  | 
 | static int max7301_probe(struct spi_device *spi) | 
 | { | 
 | 	struct max7301 *ts; | 
 | 	int ret; | 
 |  | 
 | 	/* bits_per_word cannot be configured in platform data */ | 
 | 	spi->bits_per_word = 16; | 
 | 	ret = spi_setup(spi); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	ts = devm_kzalloc(&spi->dev, sizeof(struct max7301), GFP_KERNEL); | 
 | 	if (!ts) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	ts->read = max7301_spi_read; | 
 | 	ts->write = max7301_spi_write; | 
 | 	ts->dev = &spi->dev; | 
 |  | 
 | 	ret = __max730x_probe(ts); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int max7301_remove(struct spi_device *spi) | 
 | { | 
 | 	return __max730x_remove(&spi->dev); | 
 | } | 
 |  | 
 | static const struct spi_device_id max7301_id[] = { | 
 | 	{ "max7301", 0 }, | 
 | 	{ } | 
 | }; | 
 | MODULE_DEVICE_TABLE(spi, max7301_id); | 
 |  | 
 | static struct spi_driver max7301_driver = { | 
 | 	.driver = { | 
 | 		.name = "max7301", | 
 | 		.owner = THIS_MODULE, | 
 | 	}, | 
 | 	.probe = max7301_probe, | 
 | 	.remove = max7301_remove, | 
 | 	.id_table = max7301_id, | 
 | }; | 
 |  | 
 | static int __init max7301_init(void) | 
 | { | 
 | 	return spi_register_driver(&max7301_driver); | 
 | } | 
 | /* register after spi postcore initcall and before | 
 |  * subsys initcalls that may rely on these GPIOs | 
 |  */ | 
 | subsys_initcall(max7301_init); | 
 |  | 
 | static void __exit max7301_exit(void) | 
 | { | 
 | 	spi_unregister_driver(&max7301_driver); | 
 | } | 
 | module_exit(max7301_exit); | 
 |  | 
 | MODULE_AUTHOR("Juergen Beisert, Wolfram Sang"); | 
 | MODULE_LICENSE("GPL v2"); | 
 | MODULE_DESCRIPTION("MAX7301 GPIO-Expander"); |