|  | /* $Id: cosa.h,v 1.6 1999/01/06 14:02:44 kas Exp $ */ | 
|  |  | 
|  | /* | 
|  | *  Copyright (C) 1995-1997  Jan "Yenya" Kasprzak <kas@fi.muni.cz> | 
|  | * | 
|  | *  This program is free software; you can redistribute it and/or modify | 
|  | *  it under the terms of the GNU General Public License as published by | 
|  | *  the Free Software Foundation; either version 2 of the License, or | 
|  | *  (at your option) any later version. | 
|  | * | 
|  | *  This program is distributed in the hope that it will be useful, | 
|  | *  but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | *  GNU General Public License for more details. | 
|  | * | 
|  | *  You should have received a copy of the GNU General Public License | 
|  | *  along with this program; if not, write to the Free Software | 
|  | *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | 
|  | */ | 
|  |  | 
|  | #ifndef COSA_H__ | 
|  | #define COSA_H__ | 
|  |  | 
|  | #include <linux/ioctl.h> | 
|  |  | 
|  | #ifdef __KERNEL__ | 
|  | /* status register - output bits */ | 
|  | #define SR_RX_DMA_ENA   0x04    /* receiver DMA enable bit */ | 
|  | #define SR_TX_DMA_ENA   0x08    /* transmitter DMA enable bit */ | 
|  | #define SR_RST          0x10    /* SRP reset */ | 
|  | #define SR_USR_INT_ENA  0x20    /* user interrupt enable bit */ | 
|  | #define SR_TX_INT_ENA   0x40    /* transmitter interrupt enable bit */ | 
|  | #define SR_RX_INT_ENA   0x80    /* receiver interrupt enable bit */ | 
|  |  | 
|  | /* status register - input bits */ | 
|  | #define SR_USR_RQ       0x20    /* user interrupt request pending */ | 
|  | #define SR_TX_RDY       0x40    /* transmitter empty (ready) */ | 
|  | #define SR_RX_RDY       0x80    /* receiver data ready */ | 
|  |  | 
|  | #define SR_UP_REQUEST   0x02    /* request from SRP to transfer data | 
|  | up to PC */ | 
|  | #define SR_DOWN_REQUEST 0x01    /* SRP is able to transfer data down | 
|  | from PC to SRP */ | 
|  | #define SR_END_OF_TRANSFER      0x03    /* SRP signalize end of | 
|  | transfer (up or down) */ | 
|  |  | 
|  | #define SR_CMD_FROM_SRP_MASK    0x03    /* mask to get SRP command */ | 
|  |  | 
|  | /* bits in driver status byte definitions : */ | 
|  | #define SR_RDY_RCV      0x01    /* ready to receive packet */ | 
|  | #define SR_RDY_SND      0x02    /* ready to send packet */ | 
|  | #define SR_CMD_PND      0x04    /* command pending */ /* not currently used */ | 
|  |  | 
|  | /* ???? */ | 
|  | #define SR_PKT_UP       0x01    /* transfer of packet up in progress */ | 
|  | #define SR_PKT_DOWN     0x02    /* transfer of packet down in progress */ | 
|  |  | 
|  | #endif /* __KERNEL__ */ | 
|  |  | 
|  | #define SR_LOAD_ADDR    0x4400  /* SRP microcode load address */ | 
|  | #define SR_START_ADDR   0x4400  /* SRP microcode start address */ | 
|  |  | 
|  | #define COSA_LOAD_ADDR    0x400  /* SRP microcode load address */ | 
|  | #define COSA_MAX_FIRMWARE_SIZE	0x10000 | 
|  |  | 
|  | /* ioctls */ | 
|  | struct cosa_download { | 
|  | int addr, len; | 
|  | char __user *code; | 
|  | }; | 
|  |  | 
|  | /* Reset the device */ | 
|  | #define COSAIORSET	_IO('C',0xf0) | 
|  |  | 
|  | /* Start microcode at given address */ | 
|  | #define COSAIOSTRT	_IOW('C',0xf1, int) | 
|  |  | 
|  | /* Read the block from the device memory */ | 
|  | #define COSAIORMEM	_IOWR('C',0xf2, struct cosa_download *) | 
|  | /* actually the struct cosa_download itself; this is to keep | 
|  | * the ioctl number same as in 2.4 in order to keep the user-space | 
|  | * utils compatible. */ | 
|  |  | 
|  | /* Write the block to the device memory (i.e. download the microcode) */ | 
|  | #define COSAIODOWNLD	_IOW('C',0xf2, struct cosa_download *) | 
|  | /* actually the struct cosa_download itself; this is to keep | 
|  | * the ioctl number same as in 2.4 in order to keep the user-space | 
|  | * utils compatible. */ | 
|  |  | 
|  | /* Read the device type (one of "srp", "cosa", and "cosa8" for now) */ | 
|  | #define COSAIORTYPE	_IOR('C',0xf3, char *) | 
|  |  | 
|  | /* Read the device identification string */ | 
|  | #define COSAIORIDSTR	_IOR('C',0xf4, char *) | 
|  | /* Maximum length of the identification string. */ | 
|  | #define COSA_MAX_ID_STRING 128 | 
|  |  | 
|  | /* Increment/decrement the module usage count :-) */ | 
|  | /* #define COSAIOMINC	_IO('C',0xf5) */ | 
|  | /* #define COSAIOMDEC	_IO('C',0xf6) */ | 
|  |  | 
|  | /* Get the total number of cards installed */ | 
|  | #define COSAIONRCARDS	_IO('C',0xf7) | 
|  |  | 
|  | /* Get the number of channels on this card */ | 
|  | #define COSAIONRCHANS	_IO('C',0xf8) | 
|  |  | 
|  | /* Set the driver for the bus-master operations */ | 
|  | #define COSAIOBMSET	_IOW('C', 0xf9, unsigned short) | 
|  |  | 
|  | #define COSA_BM_OFF	0	/* Bus-mastering off - use ISA DMA (default) */ | 
|  | #define COSA_BM_ON	1	/* Bus-mastering on - faster but untested */ | 
|  |  | 
|  | /* Gets the busmaster status */ | 
|  | #define COSAIOBMGET	_IO('C', 0xfa) | 
|  |  | 
|  | #endif /* !COSA_H__ */ |