| /* Copyright (c) 2009-2011, Code Aurora Forum. All rights reserved. | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License version 2 and | 
 |  * only version 2 as published by the Free Software Foundation. | 
 |  * | 
 |  * This program is distributed in the hope that it will be useful, | 
 |  * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 |  * GNU General Public License for more details. | 
 |  * | 
 |  * You should have received a copy of the GNU General Public License | 
 |  * along with this program; if not, write to the Free Software | 
 |  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA | 
 |  * 02110-1301, USA. | 
 |  */ | 
 | #include <linux/gpio.h> | 
 | #include <linux/kernel.h> | 
 | #include <linux/irq.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/usb/msm_hsusb.h> | 
 | #include <linux/err.h> | 
 | #include <linux/clkdev.h> | 
 |  | 
 | #include <asm/mach-types.h> | 
 | #include <asm/mach/arch.h> | 
 | #include <asm/io.h> | 
 | #include <asm/setup.h> | 
 |  | 
 | #include <mach/irqs.h> | 
 | #include <mach/sirc.h> | 
 | #include <mach/vreg.h> | 
 | #include <mach/clk.h> | 
 | #include <linux/platform_data/mmc-msm_sdcc.h> | 
 |  | 
 | #include "devices.h" | 
 | #include "common.h" | 
 |  | 
 | static const resource_size_t qsd8x50_surf_smc91x_base __initconst = 0x70000300; | 
 | static const unsigned        qsd8x50_surf_smc91x_gpio __initconst = 156; | 
 |  | 
 | /* Leave smc91x resources empty here, as we'll fill them in | 
 |  * at run-time: they vary from board to board, and the true | 
 |  * configuration won't be known until boot. | 
 |  */ | 
 | static struct resource smc91x_resources[] = { | 
 | 	[0] = { | 
 | 		.flags = IORESOURCE_MEM, | 
 | 	}, | 
 | 	[1] = { | 
 | 		.flags = IORESOURCE_IRQ, | 
 | 	}, | 
 | }; | 
 |  | 
 | static struct platform_device smc91x_device = { | 
 | 	.name           = "smc91x", | 
 | 	.id             = 0, | 
 | 	.num_resources  = ARRAY_SIZE(smc91x_resources), | 
 | 	.resource       = smc91x_resources, | 
 | }; | 
 |  | 
 | static int __init msm_init_smc91x(void) | 
 | { | 
 | 	if (machine_is_qsd8x50_surf()) { | 
 | 		smc91x_resources[0].start = qsd8x50_surf_smc91x_base; | 
 | 		smc91x_resources[0].end   = qsd8x50_surf_smc91x_base + 0xff; | 
 | 		smc91x_resources[1].start = | 
 | 			gpio_to_irq(qsd8x50_surf_smc91x_gpio); | 
 | 		smc91x_resources[1].end   = | 
 | 			gpio_to_irq(qsd8x50_surf_smc91x_gpio); | 
 | 		platform_device_register(&smc91x_device); | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 | module_init(msm_init_smc91x); | 
 |  | 
 | static int hsusb_phy_init_seq[] = { | 
 | 	0x08, 0x31,	/* Increase HS Driver Amplitude */ | 
 | 	0x20, 0x32,	/* Enable and set Pre-Emphasis Depth to 10% */ | 
 | 	-1 | 
 | }; | 
 |  | 
 | static int hsusb_link_clk_reset(struct clk *link_clk, bool assert) | 
 | { | 
 | 	int ret; | 
 |  | 
 | 	if (assert) { | 
 | 		ret = clk_reset(link_clk, CLK_RESET_ASSERT); | 
 | 		if (ret) | 
 | 			pr_err("usb hs_clk assert failed\n"); | 
 | 	} else { | 
 | 		ret = clk_reset(link_clk, CLK_RESET_DEASSERT); | 
 | 		if (ret) | 
 | 			pr_err("usb hs_clk deassert failed\n"); | 
 | 	} | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int hsusb_phy_clk_reset(struct clk *phy_clk) | 
 | { | 
 | 	int ret; | 
 |  | 
 | 	ret = clk_reset(phy_clk, CLK_RESET_ASSERT); | 
 | 	if (ret) { | 
 | 		pr_err("usb phy clk assert failed\n"); | 
 | 		return ret; | 
 | 	} | 
 | 	usleep_range(10000, 12000); | 
 | 	ret = clk_reset(phy_clk, CLK_RESET_DEASSERT); | 
 | 	if (ret) | 
 | 		pr_err("usb phy clk deassert failed\n"); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static struct msm_otg_platform_data msm_otg_pdata = { | 
 | 	.phy_init_seq		= hsusb_phy_init_seq, | 
 | 	.mode                   = USB_DR_MODE_PERIPHERAL, | 
 | 	.otg_control		= OTG_PHY_CONTROL, | 
 | 	.link_clk_reset		= hsusb_link_clk_reset, | 
 | 	.phy_clk_reset		= hsusb_phy_clk_reset, | 
 | }; | 
 |  | 
 | static struct platform_device *devices[] __initdata = { | 
 | 	&msm_clock_8x50, | 
 | 	&msm_device_gpio_8x50, | 
 | 	&msm_device_uart3, | 
 | 	&msm_device_smd, | 
 | 	&msm_device_otg, | 
 | 	&msm_device_hsusb, | 
 | 	&msm_device_hsusb_host, | 
 | }; | 
 |  | 
 | static struct msm_mmc_gpio sdc1_gpio_cfg[] = { | 
 | 	{51, "sdc1_dat_3"}, | 
 | 	{52, "sdc1_dat_2"}, | 
 | 	{53, "sdc1_dat_1"}, | 
 | 	{54, "sdc1_dat_0"}, | 
 | 	{55, "sdc1_cmd"}, | 
 | 	{56, "sdc1_clk"} | 
 | }; | 
 |  | 
 | static struct vreg *vreg_mmc; | 
 | static unsigned long vreg_sts; | 
 |  | 
 | static uint32_t msm_sdcc_setup_power(struct device *dv, unsigned int vdd) | 
 | { | 
 | 	int rc = 0; | 
 | 	struct platform_device *pdev; | 
 |  | 
 | 	pdev = container_of(dv, struct platform_device, dev); | 
 |  | 
 | 	if (vdd == 0) { | 
 | 		if (!vreg_sts) | 
 | 			return 0; | 
 |  | 
 | 		clear_bit(pdev->id, &vreg_sts); | 
 |  | 
 | 		if (!vreg_sts) { | 
 | 			rc = vreg_disable(vreg_mmc); | 
 | 			if (rc) | 
 | 				pr_err("vreg_mmc disable failed for slot " | 
 | 						"%d: %d\n", pdev->id, rc); | 
 | 		} | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	if (!vreg_sts) { | 
 | 		rc = vreg_set_level(vreg_mmc, 2900); | 
 | 		if (rc) | 
 | 			pr_err("vreg_mmc set level failed for slot %d: %d\n", | 
 | 					pdev->id, rc); | 
 | 		rc = vreg_enable(vreg_mmc); | 
 | 		if (rc) | 
 | 			pr_err("vreg_mmc enable failed for slot %d: %d\n", | 
 | 					pdev->id, rc); | 
 | 	} | 
 | 	set_bit(pdev->id, &vreg_sts); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static struct msm_mmc_gpio_data sdc1_gpio = { | 
 | 	.gpio = sdc1_gpio_cfg, | 
 | 	.size = ARRAY_SIZE(sdc1_gpio_cfg), | 
 | }; | 
 |  | 
 | static struct msm_mmc_platform_data qsd8x50_sdc1_data = { | 
 | 	.ocr_mask	= MMC_VDD_27_28 | MMC_VDD_28_29, | 
 | 	.translate_vdd	= msm_sdcc_setup_power, | 
 | 	.gpio_data = &sdc1_gpio, | 
 | }; | 
 |  | 
 | static void __init qsd8x50_init_mmc(void) | 
 | { | 
 | 	vreg_mmc = vreg_get(NULL, "gp5"); | 
 |  | 
 | 	if (IS_ERR(vreg_mmc)) { | 
 | 		pr_err("vreg get for vreg_mmc failed (%ld)\n", | 
 | 				PTR_ERR(vreg_mmc)); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	msm_add_sdcc(1, &qsd8x50_sdc1_data, 0, 0); | 
 | } | 
 |  | 
 | static void __init qsd8x50_map_io(void) | 
 | { | 
 | 	msm_map_qsd8x50_io(); | 
 | } | 
 |  | 
 | static void __init qsd8x50_init_irq(void) | 
 | { | 
 | 	msm_init_irq(); | 
 | 	msm_init_sirc(); | 
 | } | 
 |  | 
 | static void __init qsd8x50_init(void) | 
 | { | 
 | 	msm_device_otg.dev.platform_data = &msm_otg_pdata; | 
 | 	msm_device_hsusb.dev.parent = &msm_device_otg.dev; | 
 | 	msm_device_hsusb_host.dev.parent = &msm_device_otg.dev; | 
 | 	platform_add_devices(devices, ARRAY_SIZE(devices)); | 
 | 	qsd8x50_init_mmc(); | 
 | } | 
 |  | 
 | static void __init qsd8x50_init_late(void) | 
 | { | 
 | 	smd_debugfs_init(); | 
 | } | 
 |  | 
 | MACHINE_START(QSD8X50_SURF, "QCT QSD8X50 SURF") | 
 | 	.atag_offset = 0x100, | 
 | 	.map_io = qsd8x50_map_io, | 
 | 	.init_irq = qsd8x50_init_irq, | 
 | 	.init_machine = qsd8x50_init, | 
 | 	.init_late = qsd8x50_init_late, | 
 | 	.init_time	= qsd8x50_timer_init, | 
 | MACHINE_END | 
 |  | 
 | MACHINE_START(QSD8X50A_ST1_5, "QCT QSD8X50A ST1.5") | 
 | 	.atag_offset = 0x100, | 
 | 	.map_io = qsd8x50_map_io, | 
 | 	.init_irq = qsd8x50_init_irq, | 
 | 	.init_machine = qsd8x50_init, | 
 | 	.init_late = qsd8x50_init_late, | 
 | 	.init_time	= qsd8x50_timer_init, | 
 | MACHINE_END |