| // SPDX-License-Identifier: GPL-2.0 | 
 | /* | 
 |  * Extensible Firmware Interface | 
 |  * | 
 |  * Based on Extensible Firmware Interface Specification version 2.4 | 
 |  * | 
 |  * Copyright (C) 2013 - 2015 Linaro Ltd. | 
 |  */ | 
 |  | 
 | #define pr_fmt(fmt)	"efi: " fmt | 
 |  | 
 | #include <linux/efi.h> | 
 | #include <linux/fwnode.h> | 
 | #include <linux/init.h> | 
 | #include <linux/memblock.h> | 
 | #include <linux/mm_types.h> | 
 | #include <linux/of.h> | 
 | #include <linux/of_address.h> | 
 | #include <linux/of_fdt.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/screen_info.h> | 
 |  | 
 | #include <asm/efi.h> | 
 |  | 
 | unsigned long __initdata screen_info_table = EFI_INVALID_TABLE_ADDR; | 
 |  | 
 | static int __init is_memory(efi_memory_desc_t *md) | 
 | { | 
 | 	if (md->attribute & (EFI_MEMORY_WB|EFI_MEMORY_WT|EFI_MEMORY_WC)) | 
 | 		return 1; | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * Translate a EFI virtual address into a physical address: this is necessary, | 
 |  * as some data members of the EFI system table are virtually remapped after | 
 |  * SetVirtualAddressMap() has been called. | 
 |  */ | 
 | static phys_addr_t __init efi_to_phys(unsigned long addr) | 
 | { | 
 | 	efi_memory_desc_t *md; | 
 |  | 
 | 	for_each_efi_memory_desc(md) { | 
 | 		if (!(md->attribute & EFI_MEMORY_RUNTIME)) | 
 | 			continue; | 
 | 		if (md->virt_addr == 0) | 
 | 			/* no virtual mapping has been installed by the stub */ | 
 | 			break; | 
 | 		if (md->virt_addr <= addr && | 
 | 		    (addr - md->virt_addr) < (md->num_pages << EFI_PAGE_SHIFT)) | 
 | 			return md->phys_addr + addr - md->virt_addr; | 
 | 	} | 
 | 	return addr; | 
 | } | 
 |  | 
 | extern __weak const efi_config_table_type_t efi_arch_tables[]; | 
 |  | 
 | /* | 
 |  * x86 defines its own screen_info and uses it even without EFI, | 
 |  * everything else can get it from here. | 
 |  */ | 
 | #if !defined(CONFIG_X86) && (defined(CONFIG_SYSFB) || defined(CONFIG_EFI_EARLYCON)) | 
 | struct screen_info screen_info __section(".data"); | 
 | EXPORT_SYMBOL_GPL(screen_info); | 
 | #endif | 
 |  | 
 | static void __init init_screen_info(void) | 
 | { | 
 | 	struct screen_info *si; | 
 |  | 
 | 	if (screen_info_table != EFI_INVALID_TABLE_ADDR) { | 
 | 		si = early_memremap(screen_info_table, sizeof(*si)); | 
 | 		if (!si) { | 
 | 			pr_err("Could not map screen_info config table\n"); | 
 | 			return; | 
 | 		} | 
 | 		screen_info = *si; | 
 | 		memset(si, 0, sizeof(*si)); | 
 | 		early_memunmap(si, sizeof(*si)); | 
 |  | 
 | 		if (memblock_is_map_memory(screen_info.lfb_base)) | 
 | 			memblock_mark_nomap(screen_info.lfb_base, | 
 | 					    screen_info.lfb_size); | 
 |  | 
 | 		if (IS_ENABLED(CONFIG_EFI_EARLYCON)) | 
 | 			efi_earlycon_reprobe(); | 
 | 	} | 
 | } | 
 |  | 
 | static int __init uefi_init(u64 efi_system_table) | 
 | { | 
 | 	efi_config_table_t *config_tables; | 
 | 	efi_system_table_t *systab; | 
 | 	size_t table_size; | 
 | 	int retval; | 
 |  | 
 | 	systab = early_memremap_ro(efi_system_table, sizeof(efi_system_table_t)); | 
 | 	if (systab == NULL) { | 
 | 		pr_warn("Unable to map EFI system table.\n"); | 
 | 		return -ENOMEM; | 
 | 	} | 
 |  | 
 | 	set_bit(EFI_BOOT, &efi.flags); | 
 | 	if (IS_ENABLED(CONFIG_64BIT)) | 
 | 		set_bit(EFI_64BIT, &efi.flags); | 
 |  | 
 | 	retval = efi_systab_check_header(&systab->hdr); | 
 | 	if (retval) | 
 | 		goto out; | 
 |  | 
 | 	efi.runtime = systab->runtime; | 
 | 	efi.runtime_version = systab->hdr.revision; | 
 |  | 
 | 	efi_systab_report_header(&systab->hdr, efi_to_phys(systab->fw_vendor)); | 
 |  | 
 | 	table_size = sizeof(efi_config_table_t) * systab->nr_tables; | 
 | 	config_tables = early_memremap_ro(efi_to_phys(systab->tables), | 
 | 					  table_size); | 
 | 	if (config_tables == NULL) { | 
 | 		pr_warn("Unable to map EFI config table array.\n"); | 
 | 		retval = -ENOMEM; | 
 | 		goto out; | 
 | 	} | 
 | 	retval = efi_config_parse_tables(config_tables, systab->nr_tables, | 
 | 					 efi_arch_tables); | 
 |  | 
 | 	early_memunmap(config_tables, table_size); | 
 | out: | 
 | 	early_memunmap(systab, sizeof(efi_system_table_t)); | 
 | 	return retval; | 
 | } | 
 |  | 
 | /* | 
 |  * Return true for regions that can be used as System RAM. | 
 |  */ | 
 | static __init int is_usable_memory(efi_memory_desc_t *md) | 
 | { | 
 | 	switch (md->type) { | 
 | 	case EFI_LOADER_CODE: | 
 | 	case EFI_LOADER_DATA: | 
 | 	case EFI_ACPI_RECLAIM_MEMORY: | 
 | 	case EFI_BOOT_SERVICES_CODE: | 
 | 	case EFI_BOOT_SERVICES_DATA: | 
 | 	case EFI_CONVENTIONAL_MEMORY: | 
 | 	case EFI_PERSISTENT_MEMORY: | 
 | 		/* | 
 | 		 * According to the spec, these regions are no longer reserved | 
 | 		 * after calling ExitBootServices(). However, we can only use | 
 | 		 * them as System RAM if they can be mapped writeback cacheable. | 
 | 		 */ | 
 | 		return (md->attribute & EFI_MEMORY_WB); | 
 | 	default: | 
 | 		break; | 
 | 	} | 
 | 	return false; | 
 | } | 
 |  | 
 | static __init void reserve_regions(void) | 
 | { | 
 | 	efi_memory_desc_t *md; | 
 | 	u64 paddr, npages, size; | 
 |  | 
 | 	if (efi_enabled(EFI_DBG)) | 
 | 		pr_info("Processing EFI memory map:\n"); | 
 |  | 
 | 	/* | 
 | 	 * Discard memblocks discovered so far: if there are any at this | 
 | 	 * point, they originate from memory nodes in the DT, and UEFI | 
 | 	 * uses its own memory map instead. | 
 | 	 */ | 
 | 	memblock_dump_all(); | 
 | 	memblock_remove(0, PHYS_ADDR_MAX); | 
 |  | 
 | 	for_each_efi_memory_desc(md) { | 
 | 		paddr = md->phys_addr; | 
 | 		npages = md->num_pages; | 
 |  | 
 | 		if (efi_enabled(EFI_DBG)) { | 
 | 			char buf[64]; | 
 |  | 
 | 			pr_info("  0x%012llx-0x%012llx %s\n", | 
 | 				paddr, paddr + (npages << EFI_PAGE_SHIFT) - 1, | 
 | 				efi_md_typeattr_format(buf, sizeof(buf), md)); | 
 | 		} | 
 |  | 
 | 		memrange_efi_to_native(&paddr, &npages); | 
 | 		size = npages << PAGE_SHIFT; | 
 |  | 
 | 		if (is_memory(md)) { | 
 | 			/* | 
 | 			 * Special purpose memory is 'soft reserved', which | 
 | 			 * means it is set aside initially. Don't add a memblock | 
 | 			 * for it now so that it can be hotplugged back in or | 
 | 			 * be assigned to the dax driver after boot. | 
 | 			 */ | 
 | 			if (efi_soft_reserve_enabled() && | 
 | 			    (md->attribute & EFI_MEMORY_SP)) | 
 | 				continue; | 
 |  | 
 | 			early_init_dt_add_memory_arch(paddr, size); | 
 |  | 
 | 			if (!is_usable_memory(md)) | 
 | 				memblock_mark_nomap(paddr, size); | 
 |  | 
 | 			/* keep ACPI reclaim memory intact for kexec etc. */ | 
 | 			if (md->type == EFI_ACPI_RECLAIM_MEMORY) | 
 | 				memblock_reserve(paddr, size); | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 | void __init efi_init(void) | 
 | { | 
 | 	struct efi_memory_map_data data; | 
 | 	u64 efi_system_table; | 
 |  | 
 | 	/* Grab UEFI information placed in FDT by stub */ | 
 | 	efi_system_table = efi_get_fdt_params(&data); | 
 | 	if (!efi_system_table) | 
 | 		return; | 
 |  | 
 | 	if (efi_memmap_init_early(&data) < 0) { | 
 | 		/* | 
 | 		* If we are booting via UEFI, the UEFI memory map is the only | 
 | 		* description of memory we have, so there is little point in | 
 | 		* proceeding if we cannot access it. | 
 | 		*/ | 
 | 		panic("Unable to map EFI memory map.\n"); | 
 | 	} | 
 |  | 
 | 	WARN(efi.memmap.desc_version != 1, | 
 | 	     "Unexpected EFI_MEMORY_DESCRIPTOR version %ld", | 
 | 	      efi.memmap.desc_version); | 
 |  | 
 | 	if (uefi_init(efi_system_table) < 0) { | 
 | 		efi_memmap_unmap(); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	reserve_regions(); | 
 | 	/* | 
 | 	 * For memblock manipulation, the cap should come after the memblock_add(). | 
 | 	 * And now, memblock is fully populated, it is time to do capping. | 
 | 	 */ | 
 | 	early_init_dt_check_for_usable_mem_range(); | 
 | 	efi_find_mirror(); | 
 | 	efi_esrt_init(); | 
 | 	efi_mokvar_table_init(); | 
 |  | 
 | 	memblock_reserve(data.phys_map & PAGE_MASK, | 
 | 			 PAGE_ALIGN(data.size + (data.phys_map & ~PAGE_MASK))); | 
 |  | 
 | 	if (IS_ENABLED(CONFIG_X86) || | 
 | 	    IS_ENABLED(CONFIG_SYSFB) || | 
 | 	    IS_ENABLED(CONFIG_EFI_EARLYCON)) | 
 | 		init_screen_info(); | 
 | } |