| // SPDX-License-Identifier: GPL-2.0 | 
 | /* | 
 |  * Copyright (C) 2017-2018, Intel Corporation | 
 |  */ | 
 |  | 
 | #include <linux/completion.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/genalloc.h> | 
 | #include <linux/io.h> | 
 | #include <linux/kfifo.h> | 
 | #include <linux/kthread.h> | 
 | #include <linux/module.h> | 
 | #include <linux/mutex.h> | 
 | #include <linux/of.h> | 
 | #include <linux/of_platform.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/spinlock.h> | 
 | #include <linux/firmware/intel/stratix10-smc.h> | 
 | #include <linux/firmware/intel/stratix10-svc-client.h> | 
 | #include <linux/types.h> | 
 |  | 
 | /** | 
 |  * SVC_NUM_DATA_IN_FIFO - number of struct stratix10_svc_data in the FIFO | 
 |  * | 
 |  * SVC_NUM_CHANNEL - number of channel supported by service layer driver | 
 |  * | 
 |  * FPGA_CONFIG_DATA_CLAIM_TIMEOUT_MS - claim back the submitted buffer(s) | 
 |  * from the secure world for FPGA manager to reuse, or to free the buffer(s) | 
 |  * when all bit-stream data had be send. | 
 |  * | 
 |  * FPGA_CONFIG_STATUS_TIMEOUT_SEC - poll the FPGA configuration status, | 
 |  * service layer will return error to FPGA manager when timeout occurs, | 
 |  * timeout is set to 30 seconds (30 * 1000) at Intel Stratix10 SoC. | 
 |  */ | 
 | #define SVC_NUM_DATA_IN_FIFO			32 | 
 | #define SVC_NUM_CHANNEL				3 | 
 | #define FPGA_CONFIG_DATA_CLAIM_TIMEOUT_MS	200 | 
 | #define FPGA_CONFIG_STATUS_TIMEOUT_SEC		30 | 
 | #define BYTE_TO_WORD_SIZE              4 | 
 |  | 
 | /* stratix10 service layer clients */ | 
 | #define STRATIX10_RSU				"stratix10-rsu" | 
 | #define INTEL_FCS				"intel-fcs" | 
 |  | 
 | typedef void (svc_invoke_fn)(unsigned long, unsigned long, unsigned long, | 
 | 			     unsigned long, unsigned long, unsigned long, | 
 | 			     unsigned long, unsigned long, | 
 | 			     struct arm_smccc_res *); | 
 | struct stratix10_svc_chan; | 
 |  | 
 | /** | 
 |  * struct stratix10_svc - svc private data | 
 |  * @stratix10_svc_rsu: pointer to stratix10 RSU device | 
 |  */ | 
 | struct stratix10_svc { | 
 | 	struct platform_device *stratix10_svc_rsu; | 
 | 	struct platform_device *intel_svc_fcs; | 
 | }; | 
 |  | 
 | /** | 
 |  * struct stratix10_svc_sh_memory - service shared memory structure | 
 |  * @sync_complete: state for a completion | 
 |  * @addr: physical address of shared memory block | 
 |  * @size: size of shared memory block | 
 |  * @invoke_fn: function to issue secure monitor or hypervisor call | 
 |  * | 
 |  * This struct is used to save physical address and size of shared memory | 
 |  * block. The shared memory blocked is allocated by secure monitor software | 
 |  * at secure world. | 
 |  * | 
 |  * Service layer driver uses the physical address and size to create a memory | 
 |  * pool, then allocates data buffer from that memory pool for service client. | 
 |  */ | 
 | struct stratix10_svc_sh_memory { | 
 | 	struct completion sync_complete; | 
 | 	unsigned long addr; | 
 | 	unsigned long size; | 
 | 	svc_invoke_fn *invoke_fn; | 
 | }; | 
 |  | 
 | /** | 
 |  * struct stratix10_svc_data_mem - service memory structure | 
 |  * @vaddr: virtual address | 
 |  * @paddr: physical address | 
 |  * @size: size of memory | 
 |  * @node: link list head node | 
 |  * | 
 |  * This struct is used in a list that keeps track of buffers which have | 
 |  * been allocated or freed from the memory pool. Service layer driver also | 
 |  * uses this struct to transfer physical address to virtual address. | 
 |  */ | 
 | struct stratix10_svc_data_mem { | 
 | 	void *vaddr; | 
 | 	phys_addr_t paddr; | 
 | 	size_t size; | 
 | 	struct list_head node; | 
 | }; | 
 |  | 
 | /** | 
 |  * struct stratix10_svc_data - service data structure | 
 |  * @chan: service channel | 
 |  * @paddr: physical address of to be processed payload | 
 |  * @size: to be processed playload size | 
 |  * @paddr_output: physical address of processed payload | 
 |  * @size_output: processed payload size | 
 |  * @command: service command requested by client | 
 |  * @flag: configuration type (full or partial) | 
 |  * @arg: args to be passed via registers and not physically mapped buffers | 
 |  * | 
 |  * This struct is used in service FIFO for inter-process communication. | 
 |  */ | 
 | struct stratix10_svc_data { | 
 | 	struct stratix10_svc_chan *chan; | 
 | 	phys_addr_t paddr; | 
 | 	size_t size; | 
 | 	phys_addr_t paddr_output; | 
 | 	size_t size_output; | 
 | 	u32 command; | 
 | 	u32 flag; | 
 | 	u64 arg[3]; | 
 | }; | 
 |  | 
 | /** | 
 |  * struct stratix10_svc_controller - service controller | 
 |  * @dev: device | 
 |  * @chans: array of service channels | 
 |  * @num_chans: number of channels in 'chans' array | 
 |  * @num_active_client: number of active service client | 
 |  * @node: list management | 
 |  * @genpool: memory pool pointing to the memory region | 
 |  * @task: pointer to the thread task which handles SMC or HVC call | 
 |  * @svc_fifo: a queue for storing service message data | 
 |  * @complete_status: state for completion | 
 |  * @svc_fifo_lock: protect access to service message data queue | 
 |  * @invoke_fn: function to issue secure monitor call or hypervisor call | 
 |  * | 
 |  * This struct is used to create communication channels for service clients, to | 
 |  * handle secure monitor or hypervisor call. | 
 |  */ | 
 | struct stratix10_svc_controller { | 
 | 	struct device *dev; | 
 | 	struct stratix10_svc_chan *chans; | 
 | 	int num_chans; | 
 | 	int num_active_client; | 
 | 	struct list_head node; | 
 | 	struct gen_pool *genpool; | 
 | 	struct task_struct *task; | 
 | 	struct kfifo svc_fifo; | 
 | 	struct completion complete_status; | 
 | 	spinlock_t svc_fifo_lock; | 
 | 	svc_invoke_fn *invoke_fn; | 
 | }; | 
 |  | 
 | /** | 
 |  * struct stratix10_svc_chan - service communication channel | 
 |  * @ctrl: pointer to service controller which is the provider of this channel | 
 |  * @scl: pointer to service client which owns the channel | 
 |  * @name: service client name associated with the channel | 
 |  * @lock: protect access to the channel | 
 |  * | 
 |  * This struct is used by service client to communicate with service layer, each | 
 |  * service client has its own channel created by service controller. | 
 |  */ | 
 | struct stratix10_svc_chan { | 
 | 	struct stratix10_svc_controller *ctrl; | 
 | 	struct stratix10_svc_client *scl; | 
 | 	char *name; | 
 | 	spinlock_t lock; | 
 | }; | 
 |  | 
 | static LIST_HEAD(svc_ctrl); | 
 | static LIST_HEAD(svc_data_mem); | 
 |  | 
 | /** | 
 |  * svc_pa_to_va() - translate physical address to virtual address | 
 |  * @addr: to be translated physical address | 
 |  * | 
 |  * Return: valid virtual address or NULL if the provided physical | 
 |  * address doesn't exist. | 
 |  */ | 
 | static void *svc_pa_to_va(unsigned long addr) | 
 | { | 
 | 	struct stratix10_svc_data_mem *pmem; | 
 |  | 
 | 	pr_debug("claim back P-addr=0x%016x\n", (unsigned int)addr); | 
 | 	list_for_each_entry(pmem, &svc_data_mem, node) | 
 | 		if (pmem->paddr == addr) | 
 | 			return pmem->vaddr; | 
 |  | 
 | 	/* physical address is not found */ | 
 | 	return NULL; | 
 | } | 
 |  | 
 | /** | 
 |  * svc_thread_cmd_data_claim() - claim back buffer from the secure world | 
 |  * @ctrl: pointer to service layer controller | 
 |  * @p_data: pointer to service data structure | 
 |  * @cb_data: pointer to callback data structure to service client | 
 |  * | 
 |  * Claim back the submitted buffers from the secure world and pass buffer | 
 |  * back to service client (FPGA manager, etc) for reuse. | 
 |  */ | 
 | static void svc_thread_cmd_data_claim(struct stratix10_svc_controller *ctrl, | 
 | 				      struct stratix10_svc_data *p_data, | 
 | 				      struct stratix10_svc_cb_data *cb_data) | 
 | { | 
 | 	struct arm_smccc_res res; | 
 | 	unsigned long timeout; | 
 |  | 
 | 	reinit_completion(&ctrl->complete_status); | 
 | 	timeout = msecs_to_jiffies(FPGA_CONFIG_DATA_CLAIM_TIMEOUT_MS); | 
 |  | 
 | 	pr_debug("%s: claim back the submitted buffer\n", __func__); | 
 | 	do { | 
 | 		ctrl->invoke_fn(INTEL_SIP_SMC_FPGA_CONFIG_COMPLETED_WRITE, | 
 | 				0, 0, 0, 0, 0, 0, 0, &res); | 
 |  | 
 | 		if (res.a0 == INTEL_SIP_SMC_STATUS_OK) { | 
 | 			if (!res.a1) { | 
 | 				complete(&ctrl->complete_status); | 
 | 				break; | 
 | 			} | 
 | 			cb_data->status = BIT(SVC_STATUS_BUFFER_DONE); | 
 | 			cb_data->kaddr1 = svc_pa_to_va(res.a1); | 
 | 			cb_data->kaddr2 = (res.a2) ? | 
 | 					  svc_pa_to_va(res.a2) : NULL; | 
 | 			cb_data->kaddr3 = (res.a3) ? | 
 | 					  svc_pa_to_va(res.a3) : NULL; | 
 | 			p_data->chan->scl->receive_cb(p_data->chan->scl, | 
 | 						      cb_data); | 
 | 		} else { | 
 | 			pr_debug("%s: secure world busy, polling again\n", | 
 | 				 __func__); | 
 | 		} | 
 | 	} while (res.a0 == INTEL_SIP_SMC_STATUS_OK || | 
 | 		 res.a0 == INTEL_SIP_SMC_STATUS_BUSY || | 
 | 		 wait_for_completion_timeout(&ctrl->complete_status, timeout)); | 
 | } | 
 |  | 
 | /** | 
 |  * svc_thread_cmd_config_status() - check configuration status | 
 |  * @ctrl: pointer to service layer controller | 
 |  * @p_data: pointer to service data structure | 
 |  * @cb_data: pointer to callback data structure to service client | 
 |  * | 
 |  * Check whether the secure firmware at secure world has finished the FPGA | 
 |  * configuration, and then inform FPGA manager the configuration status. | 
 |  */ | 
 | static void svc_thread_cmd_config_status(struct stratix10_svc_controller *ctrl, | 
 | 					 struct stratix10_svc_data *p_data, | 
 | 					 struct stratix10_svc_cb_data *cb_data) | 
 | { | 
 | 	struct arm_smccc_res res; | 
 | 	int count_in_sec; | 
 | 	unsigned long a0, a1, a2; | 
 |  | 
 | 	cb_data->kaddr1 = NULL; | 
 | 	cb_data->kaddr2 = NULL; | 
 | 	cb_data->kaddr3 = NULL; | 
 | 	cb_data->status = BIT(SVC_STATUS_ERROR); | 
 |  | 
 | 	pr_debug("%s: polling config status\n", __func__); | 
 |  | 
 | 	a0 = INTEL_SIP_SMC_FPGA_CONFIG_ISDONE; | 
 | 	a1 = (unsigned long)p_data->paddr; | 
 | 	a2 = (unsigned long)p_data->size; | 
 |  | 
 | 	if (p_data->command == COMMAND_POLL_SERVICE_STATUS) | 
 | 		a0 = INTEL_SIP_SMC_SERVICE_COMPLETED; | 
 |  | 
 | 	count_in_sec = FPGA_CONFIG_STATUS_TIMEOUT_SEC; | 
 | 	while (count_in_sec) { | 
 | 		ctrl->invoke_fn(a0, a1, a2, 0, 0, 0, 0, 0, &res); | 
 | 		if ((res.a0 == INTEL_SIP_SMC_STATUS_OK) || | 
 | 		    (res.a0 == INTEL_SIP_SMC_STATUS_ERROR) || | 
 | 		    (res.a0 == INTEL_SIP_SMC_STATUS_REJECTED)) | 
 | 			break; | 
 |  | 
 | 		/* | 
 | 		 * request is still in progress, wait one second then | 
 | 		 * poll again | 
 | 		 */ | 
 | 		msleep(1000); | 
 | 		count_in_sec--; | 
 | 	} | 
 |  | 
 | 	if (!count_in_sec) { | 
 | 		pr_err("%s: poll status timeout\n", __func__); | 
 | 		cb_data->status = BIT(SVC_STATUS_BUSY); | 
 | 	} else if (res.a0 == INTEL_SIP_SMC_STATUS_OK) { | 
 | 		cb_data->status = BIT(SVC_STATUS_COMPLETED); | 
 | 		cb_data->kaddr2 = (res.a2) ? | 
 | 				  svc_pa_to_va(res.a2) : NULL; | 
 | 		cb_data->kaddr3 = (res.a3) ? &res.a3 : NULL; | 
 | 	} else { | 
 | 		pr_err("%s: poll status error\n", __func__); | 
 | 		cb_data->kaddr1 = &res.a1; | 
 | 		cb_data->kaddr2 = (res.a2) ? | 
 | 				  svc_pa_to_va(res.a2) : NULL; | 
 | 		cb_data->kaddr3 = (res.a3) ? &res.a3 : NULL; | 
 | 		cb_data->status = BIT(SVC_STATUS_ERROR); | 
 | 	} | 
 |  | 
 | 	p_data->chan->scl->receive_cb(p_data->chan->scl, cb_data); | 
 | } | 
 |  | 
 | /** | 
 |  * svc_thread_recv_status_ok() - handle the successful status | 
 |  * @p_data: pointer to service data structure | 
 |  * @cb_data: pointer to callback data structure to service client | 
 |  * @res: result from SMC or HVC call | 
 |  * | 
 |  * Send back the correspond status to the service clients. | 
 |  */ | 
 | static void svc_thread_recv_status_ok(struct stratix10_svc_data *p_data, | 
 | 				      struct stratix10_svc_cb_data *cb_data, | 
 | 				      struct arm_smccc_res res) | 
 | { | 
 | 	cb_data->kaddr1 = NULL; | 
 | 	cb_data->kaddr2 = NULL; | 
 | 	cb_data->kaddr3 = NULL; | 
 |  | 
 | 	switch (p_data->command) { | 
 | 	case COMMAND_RECONFIG: | 
 | 	case COMMAND_RSU_UPDATE: | 
 | 	case COMMAND_RSU_NOTIFY: | 
 | 	case COMMAND_FCS_REQUEST_SERVICE: | 
 | 	case COMMAND_FCS_SEND_CERTIFICATE: | 
 | 	case COMMAND_FCS_DATA_ENCRYPTION: | 
 | 	case COMMAND_FCS_DATA_DECRYPTION: | 
 | 		cb_data->status = BIT(SVC_STATUS_OK); | 
 | 		break; | 
 | 	case COMMAND_RECONFIG_DATA_SUBMIT: | 
 | 		cb_data->status = BIT(SVC_STATUS_BUFFER_SUBMITTED); | 
 | 		break; | 
 | 	case COMMAND_RECONFIG_STATUS: | 
 | 		cb_data->status = BIT(SVC_STATUS_COMPLETED); | 
 | 		break; | 
 | 	case COMMAND_RSU_RETRY: | 
 | 	case COMMAND_RSU_MAX_RETRY: | 
 | 	case COMMAND_RSU_DCMF_STATUS: | 
 | 	case COMMAND_FIRMWARE_VERSION: | 
 | 		cb_data->status = BIT(SVC_STATUS_OK); | 
 | 		cb_data->kaddr1 = &res.a1; | 
 | 		break; | 
 | 	case COMMAND_SMC_SVC_VERSION: | 
 | 		cb_data->status = BIT(SVC_STATUS_OK); | 
 | 		cb_data->kaddr1 = &res.a1; | 
 | 		cb_data->kaddr2 = &res.a2; | 
 | 		break; | 
 | 	case COMMAND_RSU_DCMF_VERSION: | 
 | 		cb_data->status = BIT(SVC_STATUS_OK); | 
 | 		cb_data->kaddr1 = &res.a1; | 
 | 		cb_data->kaddr2 = &res.a2; | 
 | 		break; | 
 | 	case COMMAND_FCS_RANDOM_NUMBER_GEN: | 
 | 	case COMMAND_FCS_GET_PROVISION_DATA: | 
 | 	case COMMAND_POLL_SERVICE_STATUS: | 
 | 		cb_data->status = BIT(SVC_STATUS_OK); | 
 | 		cb_data->kaddr1 = &res.a1; | 
 | 		cb_data->kaddr2 = svc_pa_to_va(res.a2); | 
 | 		cb_data->kaddr3 = &res.a3; | 
 | 		break; | 
 | 	case COMMAND_MBOX_SEND_CMD: | 
 | 		cb_data->status = BIT(SVC_STATUS_OK); | 
 | 		cb_data->kaddr1 = &res.a1; | 
 | 		/* SDM return size in u8. Convert size to u32 word */ | 
 | 		res.a2 = res.a2 * BYTE_TO_WORD_SIZE; | 
 | 		cb_data->kaddr2 = &res.a2; | 
 | 		break; | 
 | 	default: | 
 | 		pr_warn("it shouldn't happen\n"); | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	pr_debug("%s: call receive_cb\n", __func__); | 
 | 	p_data->chan->scl->receive_cb(p_data->chan->scl, cb_data); | 
 | } | 
 |  | 
 | /** | 
 |  * svc_normal_to_secure_thread() - the function to run in the kthread | 
 |  * @data: data pointer for kthread function | 
 |  * | 
 |  * Service layer driver creates stratix10_svc_smc_hvc_call kthread on CPU | 
 |  * node 0, its function stratix10_svc_secure_call_thread is used to handle | 
 |  * SMC or HVC calls between kernel driver and secure monitor software. | 
 |  * | 
 |  * Return: 0 for success or -ENOMEM on error. | 
 |  */ | 
 | static int svc_normal_to_secure_thread(void *data) | 
 | { | 
 | 	struct stratix10_svc_controller | 
 | 			*ctrl = (struct stratix10_svc_controller *)data; | 
 | 	struct stratix10_svc_data *pdata; | 
 | 	struct stratix10_svc_cb_data *cbdata; | 
 | 	struct arm_smccc_res res; | 
 | 	unsigned long a0, a1, a2, a3, a4, a5, a6, a7; | 
 | 	int ret_fifo = 0; | 
 |  | 
 | 	pdata =  kmalloc(sizeof(*pdata), GFP_KERNEL); | 
 | 	if (!pdata) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	cbdata = kmalloc(sizeof(*cbdata), GFP_KERNEL); | 
 | 	if (!cbdata) { | 
 | 		kfree(pdata); | 
 | 		return -ENOMEM; | 
 | 	} | 
 |  | 
 | 	/* default set, to remove build warning */ | 
 | 	a0 = INTEL_SIP_SMC_FPGA_CONFIG_LOOPBACK; | 
 | 	a1 = 0; | 
 | 	a2 = 0; | 
 | 	a3 = 0; | 
 | 	a4 = 0; | 
 | 	a5 = 0; | 
 | 	a6 = 0; | 
 | 	a7 = 0; | 
 |  | 
 | 	pr_debug("smc_hvc_shm_thread is running\n"); | 
 |  | 
 | 	while (!kthread_should_stop()) { | 
 | 		ret_fifo = kfifo_out_spinlocked(&ctrl->svc_fifo, | 
 | 						pdata, sizeof(*pdata), | 
 | 						&ctrl->svc_fifo_lock); | 
 |  | 
 | 		if (!ret_fifo) | 
 | 			continue; | 
 |  | 
 | 		pr_debug("get from FIFO pa=0x%016x, command=%u, size=%u\n", | 
 | 			 (unsigned int)pdata->paddr, pdata->command, | 
 | 			 (unsigned int)pdata->size); | 
 |  | 
 | 		switch (pdata->command) { | 
 | 		case COMMAND_RECONFIG_DATA_CLAIM: | 
 | 			svc_thread_cmd_data_claim(ctrl, pdata, cbdata); | 
 | 			continue; | 
 | 		case COMMAND_RECONFIG: | 
 | 			a0 = INTEL_SIP_SMC_FPGA_CONFIG_START; | 
 | 			pr_debug("conf_type=%u\n", (unsigned int)pdata->flag); | 
 | 			a1 = pdata->flag; | 
 | 			a2 = 0; | 
 | 			break; | 
 | 		case COMMAND_RECONFIG_DATA_SUBMIT: | 
 | 			a0 = INTEL_SIP_SMC_FPGA_CONFIG_WRITE; | 
 | 			a1 = (unsigned long)pdata->paddr; | 
 | 			a2 = (unsigned long)pdata->size; | 
 | 			break; | 
 | 		case COMMAND_RECONFIG_STATUS: | 
 | 			a0 = INTEL_SIP_SMC_FPGA_CONFIG_ISDONE; | 
 | 			a1 = 0; | 
 | 			a2 = 0; | 
 | 			break; | 
 | 		case COMMAND_RSU_STATUS: | 
 | 			a0 = INTEL_SIP_SMC_RSU_STATUS; | 
 | 			a1 = 0; | 
 | 			a2 = 0; | 
 | 			break; | 
 | 		case COMMAND_RSU_UPDATE: | 
 | 			a0 = INTEL_SIP_SMC_RSU_UPDATE; | 
 | 			a1 = pdata->arg[0]; | 
 | 			a2 = 0; | 
 | 			break; | 
 | 		case COMMAND_RSU_NOTIFY: | 
 | 			a0 = INTEL_SIP_SMC_RSU_NOTIFY; | 
 | 			a1 = pdata->arg[0]; | 
 | 			a2 = 0; | 
 | 			break; | 
 | 		case COMMAND_RSU_RETRY: | 
 | 			a0 = INTEL_SIP_SMC_RSU_RETRY_COUNTER; | 
 | 			a1 = 0; | 
 | 			a2 = 0; | 
 | 			break; | 
 | 		case COMMAND_RSU_MAX_RETRY: | 
 | 			a0 = INTEL_SIP_SMC_RSU_MAX_RETRY; | 
 | 			a1 = 0; | 
 | 			a2 = 0; | 
 | 			break; | 
 | 		case COMMAND_RSU_DCMF_VERSION: | 
 | 			a0 = INTEL_SIP_SMC_RSU_DCMF_VERSION; | 
 | 			a1 = 0; | 
 | 			a2 = 0; | 
 | 			break; | 
 | 		case COMMAND_FIRMWARE_VERSION: | 
 | 			a0 = INTEL_SIP_SMC_FIRMWARE_VERSION; | 
 | 			a1 = 0; | 
 | 			a2 = 0; | 
 | 			break; | 
 |  | 
 | 		/* for FCS */ | 
 | 		case COMMAND_FCS_DATA_ENCRYPTION: | 
 | 			a0 = INTEL_SIP_SMC_FCS_CRYPTION; | 
 | 			a1 = 1; | 
 | 			a2 = (unsigned long)pdata->paddr; | 
 | 			a3 = (unsigned long)pdata->size; | 
 | 			a4 = (unsigned long)pdata->paddr_output; | 
 | 			a5 = (unsigned long)pdata->size_output; | 
 | 			break; | 
 | 		case COMMAND_FCS_DATA_DECRYPTION: | 
 | 			a0 = INTEL_SIP_SMC_FCS_CRYPTION; | 
 | 			a1 = 0; | 
 | 			a2 = (unsigned long)pdata->paddr; | 
 | 			a3 = (unsigned long)pdata->size; | 
 | 			a4 = (unsigned long)pdata->paddr_output; | 
 | 			a5 = (unsigned long)pdata->size_output; | 
 | 			break; | 
 | 		case COMMAND_FCS_RANDOM_NUMBER_GEN: | 
 | 			a0 = INTEL_SIP_SMC_FCS_RANDOM_NUMBER; | 
 | 			a1 = (unsigned long)pdata->paddr; | 
 | 			a2 = 0; | 
 | 			break; | 
 | 		case COMMAND_FCS_REQUEST_SERVICE: | 
 | 			a0 = INTEL_SIP_SMC_FCS_SERVICE_REQUEST; | 
 | 			a1 = (unsigned long)pdata->paddr; | 
 | 			a2 = (unsigned long)pdata->size; | 
 | 			break; | 
 | 		case COMMAND_FCS_SEND_CERTIFICATE: | 
 | 			a0 = INTEL_SIP_SMC_FCS_SEND_CERTIFICATE; | 
 | 			a1 = (unsigned long)pdata->paddr; | 
 | 			a2 = (unsigned long)pdata->size; | 
 | 			break; | 
 | 		case COMMAND_FCS_GET_PROVISION_DATA: | 
 | 			a0 = INTEL_SIP_SMC_FCS_GET_PROVISION_DATA; | 
 | 			a1 = (unsigned long)pdata->paddr; | 
 | 			a2 = 0; | 
 | 			break; | 
 |  | 
 | 		/* for polling */ | 
 | 		case COMMAND_POLL_SERVICE_STATUS: | 
 | 			a0 = INTEL_SIP_SMC_SERVICE_COMPLETED; | 
 | 			a1 = (unsigned long)pdata->paddr; | 
 | 			a2 = (unsigned long)pdata->size; | 
 | 			break; | 
 | 		case COMMAND_RSU_DCMF_STATUS: | 
 | 			a0 = INTEL_SIP_SMC_RSU_DCMF_STATUS; | 
 | 			a1 = 0; | 
 | 			a2 = 0; | 
 | 			break; | 
 | 		case COMMAND_SMC_SVC_VERSION: | 
 | 			a0 = INTEL_SIP_SMC_SVC_VERSION; | 
 | 			a1 = 0; | 
 | 			a2 = 0; | 
 | 			break; | 
 | 		case COMMAND_MBOX_SEND_CMD: | 
 | 			a0 = INTEL_SIP_SMC_MBOX_SEND_CMD; | 
 | 			a1 = pdata->arg[0]; | 
 | 			a2 = (unsigned long)pdata->paddr; | 
 | 			a3 = (unsigned long)pdata->size / BYTE_TO_WORD_SIZE; | 
 | 			a4 = pdata->arg[1]; | 
 | 			a5 = (unsigned long)pdata->paddr_output; | 
 | 			a6 = (unsigned long)pdata->size_output / BYTE_TO_WORD_SIZE; | 
 | 			break; | 
 | 		default: | 
 | 			pr_warn("it shouldn't happen\n"); | 
 | 			break; | 
 | 		} | 
 | 		pr_debug("%s: before SMC call -- a0=0x%016x a1=0x%016x", | 
 | 			 __func__, | 
 | 			 (unsigned int)a0, | 
 | 			 (unsigned int)a1); | 
 | 		pr_debug(" a2=0x%016x\n", (unsigned int)a2); | 
 | 		pr_debug(" a3=0x%016x\n", (unsigned int)a3); | 
 | 		pr_debug(" a4=0x%016x\n", (unsigned int)a4); | 
 | 		pr_debug(" a5=0x%016x\n", (unsigned int)a5); | 
 | 		ctrl->invoke_fn(a0, a1, a2, a3, a4, a5, a6, a7, &res); | 
 |  | 
 | 		pr_debug("%s: after SMC call -- res.a0=0x%016x", | 
 | 			 __func__, (unsigned int)res.a0); | 
 | 		pr_debug(" res.a1=0x%016x, res.a2=0x%016x", | 
 | 			 (unsigned int)res.a1, (unsigned int)res.a2); | 
 | 		pr_debug(" res.a3=0x%016x\n", (unsigned int)res.a3); | 
 |  | 
 | 		if (pdata->command == COMMAND_RSU_STATUS) { | 
 | 			if (res.a0 == INTEL_SIP_SMC_RSU_ERROR) | 
 | 				cbdata->status = BIT(SVC_STATUS_ERROR); | 
 | 			else | 
 | 				cbdata->status = BIT(SVC_STATUS_OK); | 
 |  | 
 | 			cbdata->kaddr1 = &res; | 
 | 			cbdata->kaddr2 = NULL; | 
 | 			cbdata->kaddr3 = NULL; | 
 | 			pdata->chan->scl->receive_cb(pdata->chan->scl, cbdata); | 
 | 			continue; | 
 | 		} | 
 |  | 
 | 		switch (res.a0) { | 
 | 		case INTEL_SIP_SMC_STATUS_OK: | 
 | 			svc_thread_recv_status_ok(pdata, cbdata, res); | 
 | 			break; | 
 | 		case INTEL_SIP_SMC_STATUS_BUSY: | 
 | 			switch (pdata->command) { | 
 | 			case COMMAND_RECONFIG_DATA_SUBMIT: | 
 | 				svc_thread_cmd_data_claim(ctrl, | 
 | 							  pdata, cbdata); | 
 | 				break; | 
 | 			case COMMAND_RECONFIG_STATUS: | 
 | 			case COMMAND_POLL_SERVICE_STATUS: | 
 | 				svc_thread_cmd_config_status(ctrl, | 
 | 							     pdata, cbdata); | 
 | 				break; | 
 | 			default: | 
 | 				pr_warn("it shouldn't happen\n"); | 
 | 				break; | 
 | 			} | 
 | 			break; | 
 | 		case INTEL_SIP_SMC_STATUS_REJECTED: | 
 | 			pr_debug("%s: STATUS_REJECTED\n", __func__); | 
 | 			/* for FCS */ | 
 | 			switch (pdata->command) { | 
 | 			case COMMAND_FCS_REQUEST_SERVICE: | 
 | 			case COMMAND_FCS_SEND_CERTIFICATE: | 
 | 			case COMMAND_FCS_GET_PROVISION_DATA: | 
 | 			case COMMAND_FCS_DATA_ENCRYPTION: | 
 | 			case COMMAND_FCS_DATA_DECRYPTION: | 
 | 			case COMMAND_FCS_RANDOM_NUMBER_GEN: | 
 | 			case COMMAND_MBOX_SEND_CMD: | 
 | 				cbdata->status = BIT(SVC_STATUS_INVALID_PARAM); | 
 | 				cbdata->kaddr1 = NULL; | 
 | 				cbdata->kaddr2 = NULL; | 
 | 				cbdata->kaddr3 = NULL; | 
 | 				pdata->chan->scl->receive_cb(pdata->chan->scl, | 
 | 							     cbdata); | 
 | 				break; | 
 | 			} | 
 | 			break; | 
 | 		case INTEL_SIP_SMC_STATUS_ERROR: | 
 | 		case INTEL_SIP_SMC_RSU_ERROR: | 
 | 			pr_err("%s: STATUS_ERROR\n", __func__); | 
 | 			cbdata->status = BIT(SVC_STATUS_ERROR); | 
 | 			cbdata->kaddr1 = &res.a1; | 
 | 			cbdata->kaddr2 = (res.a2) ? | 
 | 				svc_pa_to_va(res.a2) : NULL; | 
 | 			cbdata->kaddr3 = (res.a3) ? &res.a3 : NULL; | 
 | 			pdata->chan->scl->receive_cb(pdata->chan->scl, cbdata); | 
 | 			break; | 
 | 		default: | 
 | 			pr_warn("Secure firmware doesn't support...\n"); | 
 |  | 
 | 			/* | 
 | 			 * be compatible with older version firmware which | 
 | 			 * doesn't support newer RSU commands | 
 | 			 */ | 
 | 			if ((pdata->command != COMMAND_RSU_UPDATE) && | 
 | 				(pdata->command != COMMAND_RSU_STATUS)) { | 
 | 				cbdata->status = | 
 | 					BIT(SVC_STATUS_NO_SUPPORT); | 
 | 				cbdata->kaddr1 = NULL; | 
 | 				cbdata->kaddr2 = NULL; | 
 | 				cbdata->kaddr3 = NULL; | 
 | 				pdata->chan->scl->receive_cb( | 
 | 					pdata->chan->scl, cbdata); | 
 | 			} | 
 | 			break; | 
 |  | 
 | 		} | 
 | 	} | 
 |  | 
 | 	kfree(cbdata); | 
 | 	kfree(pdata); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /** | 
 |  * svc_normal_to_secure_shm_thread() - the function to run in the kthread | 
 |  * @data: data pointer for kthread function | 
 |  * | 
 |  * Service layer driver creates stratix10_svc_smc_hvc_shm kthread on CPU | 
 |  * node 0, its function stratix10_svc_secure_shm_thread is used to query the | 
 |  * physical address of memory block reserved by secure monitor software at | 
 |  * secure world. | 
 |  * | 
 |  * svc_normal_to_secure_shm_thread() terminates directly since it is a | 
 |  * standlone thread for which no one will call kthread_stop() or return when | 
 |  * 'kthread_should_stop()' is true. | 
 |  */ | 
 | static int svc_normal_to_secure_shm_thread(void *data) | 
 | { | 
 | 	struct stratix10_svc_sh_memory | 
 | 			*sh_mem = (struct stratix10_svc_sh_memory *)data; | 
 | 	struct arm_smccc_res res; | 
 |  | 
 | 	/* SMC or HVC call to get shared memory info from secure world */ | 
 | 	sh_mem->invoke_fn(INTEL_SIP_SMC_FPGA_CONFIG_GET_MEM, | 
 | 			  0, 0, 0, 0, 0, 0, 0, &res); | 
 | 	if (res.a0 == INTEL_SIP_SMC_STATUS_OK) { | 
 | 		sh_mem->addr = res.a1; | 
 | 		sh_mem->size = res.a2; | 
 | 	} else { | 
 | 		pr_err("%s: after SMC call -- res.a0=0x%016x",  __func__, | 
 | 		       (unsigned int)res.a0); | 
 | 		sh_mem->addr = 0; | 
 | 		sh_mem->size = 0; | 
 | 	} | 
 |  | 
 | 	complete(&sh_mem->sync_complete); | 
 | 	return 0; | 
 | } | 
 |  | 
 | /** | 
 |  * svc_get_sh_memory() - get memory block reserved by secure monitor SW | 
 |  * @pdev: pointer to service layer device | 
 |  * @sh_memory: pointer to service shared memory structure | 
 |  * | 
 |  * Return: zero for successfully getting the physical address of memory block | 
 |  * reserved by secure monitor software, or negative value on error. | 
 |  */ | 
 | static int svc_get_sh_memory(struct platform_device *pdev, | 
 | 				    struct stratix10_svc_sh_memory *sh_memory) | 
 | { | 
 | 	struct device *dev = &pdev->dev; | 
 | 	struct task_struct *sh_memory_task; | 
 | 	unsigned int cpu = 0; | 
 |  | 
 | 	init_completion(&sh_memory->sync_complete); | 
 |  | 
 | 	/* smc or hvc call happens on cpu 0 bound kthread */ | 
 | 	sh_memory_task = kthread_create_on_node(svc_normal_to_secure_shm_thread, | 
 | 					       (void *)sh_memory, | 
 | 						cpu_to_node(cpu), | 
 | 						"svc_smc_hvc_shm_thread"); | 
 | 	if (IS_ERR(sh_memory_task)) { | 
 | 		dev_err(dev, "fail to create stratix10_svc_smc_shm_thread\n"); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	wake_up_process(sh_memory_task); | 
 |  | 
 | 	if (!wait_for_completion_timeout(&sh_memory->sync_complete, 10 * HZ)) { | 
 | 		dev_err(dev, | 
 | 			"timeout to get sh-memory paras from secure world\n"); | 
 | 		return -ETIMEDOUT; | 
 | 	} | 
 |  | 
 | 	if (!sh_memory->addr || !sh_memory->size) { | 
 | 		dev_err(dev, | 
 | 			"failed to get shared memory info from secure world\n"); | 
 | 		return -ENOMEM; | 
 | 	} | 
 |  | 
 | 	dev_dbg(dev, "SM software provides paddr: 0x%016x, size: 0x%08x\n", | 
 | 		(unsigned int)sh_memory->addr, | 
 | 		(unsigned int)sh_memory->size); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /** | 
 |  * svc_create_memory_pool() - create a memory pool from reserved memory block | 
 |  * @pdev: pointer to service layer device | 
 |  * @sh_memory: pointer to service shared memory structure | 
 |  * | 
 |  * Return: pool allocated from reserved memory block or ERR_PTR() on error. | 
 |  */ | 
 | static struct gen_pool * | 
 | svc_create_memory_pool(struct platform_device *pdev, | 
 | 		       struct stratix10_svc_sh_memory *sh_memory) | 
 | { | 
 | 	struct device *dev = &pdev->dev; | 
 | 	struct gen_pool *genpool; | 
 | 	unsigned long vaddr; | 
 | 	phys_addr_t paddr; | 
 | 	size_t size; | 
 | 	phys_addr_t begin; | 
 | 	phys_addr_t end; | 
 | 	void *va; | 
 | 	size_t page_mask = PAGE_SIZE - 1; | 
 | 	int min_alloc_order = 3; | 
 | 	int ret; | 
 |  | 
 | 	begin = roundup(sh_memory->addr, PAGE_SIZE); | 
 | 	end = rounddown(sh_memory->addr + sh_memory->size, PAGE_SIZE); | 
 | 	paddr = begin; | 
 | 	size = end - begin; | 
 | 	va = devm_memremap(dev, paddr, size, MEMREMAP_WC); | 
 | 	if (IS_ERR(va)) { | 
 | 		dev_err(dev, "fail to remap shared memory\n"); | 
 | 		return ERR_PTR(-EINVAL); | 
 | 	} | 
 | 	vaddr = (unsigned long)va; | 
 | 	dev_dbg(dev, | 
 | 		"reserved memory vaddr: %p, paddr: 0x%16x size: 0x%8x\n", | 
 | 		va, (unsigned int)paddr, (unsigned int)size); | 
 | 	if ((vaddr & page_mask) || (paddr & page_mask) || | 
 | 	    (size & page_mask)) { | 
 | 		dev_err(dev, "page is not aligned\n"); | 
 | 		return ERR_PTR(-EINVAL); | 
 | 	} | 
 | 	genpool = gen_pool_create(min_alloc_order, -1); | 
 | 	if (!genpool) { | 
 | 		dev_err(dev, "fail to create genpool\n"); | 
 | 		return ERR_PTR(-ENOMEM); | 
 | 	} | 
 | 	gen_pool_set_algo(genpool, gen_pool_best_fit, NULL); | 
 | 	ret = gen_pool_add_virt(genpool, vaddr, paddr, size, -1); | 
 | 	if (ret) { | 
 | 		dev_err(dev, "fail to add memory chunk to the pool\n"); | 
 | 		gen_pool_destroy(genpool); | 
 | 		return ERR_PTR(ret); | 
 | 	} | 
 |  | 
 | 	return genpool; | 
 | } | 
 |  | 
 | /** | 
 |  * svc_smccc_smc() - secure monitor call between normal and secure world | 
 |  * @a0: argument passed in registers 0 | 
 |  * @a1: argument passed in registers 1 | 
 |  * @a2: argument passed in registers 2 | 
 |  * @a3: argument passed in registers 3 | 
 |  * @a4: argument passed in registers 4 | 
 |  * @a5: argument passed in registers 5 | 
 |  * @a6: argument passed in registers 6 | 
 |  * @a7: argument passed in registers 7 | 
 |  * @res: result values from register 0 to 3 | 
 |  */ | 
 | static void svc_smccc_smc(unsigned long a0, unsigned long a1, | 
 | 			  unsigned long a2, unsigned long a3, | 
 | 			  unsigned long a4, unsigned long a5, | 
 | 			  unsigned long a6, unsigned long a7, | 
 | 			  struct arm_smccc_res *res) | 
 | { | 
 | 	arm_smccc_smc(a0, a1, a2, a3, a4, a5, a6, a7, res); | 
 | } | 
 |  | 
 | /** | 
 |  * svc_smccc_hvc() - hypervisor call between normal and secure world | 
 |  * @a0: argument passed in registers 0 | 
 |  * @a1: argument passed in registers 1 | 
 |  * @a2: argument passed in registers 2 | 
 |  * @a3: argument passed in registers 3 | 
 |  * @a4: argument passed in registers 4 | 
 |  * @a5: argument passed in registers 5 | 
 |  * @a6: argument passed in registers 6 | 
 |  * @a7: argument passed in registers 7 | 
 |  * @res: result values from register 0 to 3 | 
 |  */ | 
 | static void svc_smccc_hvc(unsigned long a0, unsigned long a1, | 
 | 			  unsigned long a2, unsigned long a3, | 
 | 			  unsigned long a4, unsigned long a5, | 
 | 			  unsigned long a6, unsigned long a7, | 
 | 			  struct arm_smccc_res *res) | 
 | { | 
 | 	arm_smccc_hvc(a0, a1, a2, a3, a4, a5, a6, a7, res); | 
 | } | 
 |  | 
 | /** | 
 |  * get_invoke_func() - invoke SMC or HVC call | 
 |  * @dev: pointer to device | 
 |  * | 
 |  * Return: function pointer to svc_smccc_smc or svc_smccc_hvc. | 
 |  */ | 
 | static svc_invoke_fn *get_invoke_func(struct device *dev) | 
 | { | 
 | 	const char *method; | 
 |  | 
 | 	if (of_property_read_string(dev->of_node, "method", &method)) { | 
 | 		dev_warn(dev, "missing \"method\" property\n"); | 
 | 		return ERR_PTR(-ENXIO); | 
 | 	} | 
 |  | 
 | 	if (!strcmp(method, "smc")) | 
 | 		return svc_smccc_smc; | 
 | 	if (!strcmp(method, "hvc")) | 
 | 		return svc_smccc_hvc; | 
 |  | 
 | 	dev_warn(dev, "invalid \"method\" property: %s\n", method); | 
 |  | 
 | 	return ERR_PTR(-EINVAL); | 
 | } | 
 |  | 
 | /** | 
 |  * stratix10_svc_request_channel_byname() - request a service channel | 
 |  * @client: pointer to service client | 
 |  * @name: service client name | 
 |  * | 
 |  * This function is used by service client to request a service channel. | 
 |  * | 
 |  * Return: a pointer to channel assigned to the client on success, | 
 |  * or ERR_PTR() on error. | 
 |  */ | 
 | struct stratix10_svc_chan *stratix10_svc_request_channel_byname( | 
 | 	struct stratix10_svc_client *client, const char *name) | 
 | { | 
 | 	struct device *dev = client->dev; | 
 | 	struct stratix10_svc_controller *controller; | 
 | 	struct stratix10_svc_chan *chan = NULL; | 
 | 	unsigned long flag; | 
 | 	int i; | 
 |  | 
 | 	/* if probe was called after client's, or error on probe */ | 
 | 	if (list_empty(&svc_ctrl)) | 
 | 		return ERR_PTR(-EPROBE_DEFER); | 
 |  | 
 | 	controller = list_first_entry(&svc_ctrl, | 
 | 				      struct stratix10_svc_controller, node); | 
 | 	for (i = 0; i < SVC_NUM_CHANNEL; i++) { | 
 | 		if (!strcmp(controller->chans[i].name, name)) { | 
 | 			chan = &controller->chans[i]; | 
 | 			break; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* if there was no channel match */ | 
 | 	if (i == SVC_NUM_CHANNEL) { | 
 | 		dev_err(dev, "%s: channel not allocated\n", __func__); | 
 | 		return ERR_PTR(-EINVAL); | 
 | 	} | 
 |  | 
 | 	if (chan->scl || !try_module_get(controller->dev->driver->owner)) { | 
 | 		dev_dbg(dev, "%s: svc not free\n", __func__); | 
 | 		return ERR_PTR(-EBUSY); | 
 | 	} | 
 |  | 
 | 	spin_lock_irqsave(&chan->lock, flag); | 
 | 	chan->scl = client; | 
 | 	chan->ctrl->num_active_client++; | 
 | 	spin_unlock_irqrestore(&chan->lock, flag); | 
 |  | 
 | 	return chan; | 
 | } | 
 | EXPORT_SYMBOL_GPL(stratix10_svc_request_channel_byname); | 
 |  | 
 | /** | 
 |  * stratix10_svc_free_channel() - free service channel | 
 |  * @chan: service channel to be freed | 
 |  * | 
 |  * This function is used by service client to free a service channel. | 
 |  */ | 
 | void stratix10_svc_free_channel(struct stratix10_svc_chan *chan) | 
 | { | 
 | 	unsigned long flag; | 
 |  | 
 | 	spin_lock_irqsave(&chan->lock, flag); | 
 | 	chan->scl = NULL; | 
 | 	chan->ctrl->num_active_client--; | 
 | 	module_put(chan->ctrl->dev->driver->owner); | 
 | 	spin_unlock_irqrestore(&chan->lock, flag); | 
 | } | 
 | EXPORT_SYMBOL_GPL(stratix10_svc_free_channel); | 
 |  | 
 | /** | 
 |  * stratix10_svc_send() - send a message data to the remote | 
 |  * @chan: service channel assigned to the client | 
 |  * @msg: message data to be sent, in the format of | 
 |  * "struct stratix10_svc_client_msg" | 
 |  * | 
 |  * This function is used by service client to add a message to the service | 
 |  * layer driver's queue for being sent to the secure world. | 
 |  * | 
 |  * Return: 0 for success, -ENOMEM or -ENOBUFS on error. | 
 |  */ | 
 | int stratix10_svc_send(struct stratix10_svc_chan *chan, void *msg) | 
 | { | 
 | 	struct stratix10_svc_client_msg | 
 | 		*p_msg = (struct stratix10_svc_client_msg *)msg; | 
 | 	struct stratix10_svc_data_mem *p_mem; | 
 | 	struct stratix10_svc_data *p_data; | 
 | 	int ret = 0; | 
 | 	unsigned int cpu = 0; | 
 |  | 
 | 	p_data = kzalloc(sizeof(*p_data), GFP_KERNEL); | 
 | 	if (!p_data) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	/* first client will create kernel thread */ | 
 | 	if (!chan->ctrl->task) { | 
 | 		chan->ctrl->task = | 
 | 			kthread_run_on_cpu(svc_normal_to_secure_thread, | 
 | 					   (void *)chan->ctrl, | 
 | 					   cpu, "svc_smc_hvc_thread"); | 
 | 			if (IS_ERR(chan->ctrl->task)) { | 
 | 				dev_err(chan->ctrl->dev, | 
 | 					"failed to create svc_smc_hvc_thread\n"); | 
 | 				kfree(p_data); | 
 | 				return -EINVAL; | 
 | 			} | 
 | 	} | 
 |  | 
 | 	pr_debug("%s: sent P-va=%p, P-com=%x, P-size=%u\n", __func__, | 
 | 		 p_msg->payload, p_msg->command, | 
 | 		 (unsigned int)p_msg->payload_length); | 
 |  | 
 | 	if (list_empty(&svc_data_mem)) { | 
 | 		if (p_msg->command == COMMAND_RECONFIG) { | 
 | 			struct stratix10_svc_command_config_type *ct = | 
 | 				(struct stratix10_svc_command_config_type *) | 
 | 				p_msg->payload; | 
 | 			p_data->flag = ct->flags; | 
 | 		} | 
 | 	} else { | 
 | 		list_for_each_entry(p_mem, &svc_data_mem, node) | 
 | 			if (p_mem->vaddr == p_msg->payload) { | 
 | 				p_data->paddr = p_mem->paddr; | 
 | 				p_data->size = p_msg->payload_length; | 
 | 				break; | 
 | 			} | 
 | 		if (p_msg->payload_output) { | 
 | 			list_for_each_entry(p_mem, &svc_data_mem, node) | 
 | 				if (p_mem->vaddr == p_msg->payload_output) { | 
 | 					p_data->paddr_output = | 
 | 						p_mem->paddr; | 
 | 					p_data->size_output = | 
 | 						p_msg->payload_length_output; | 
 | 					break; | 
 | 				} | 
 | 		} | 
 | 	} | 
 |  | 
 | 	p_data->command = p_msg->command; | 
 | 	p_data->arg[0] = p_msg->arg[0]; | 
 | 	p_data->arg[1] = p_msg->arg[1]; | 
 | 	p_data->arg[2] = p_msg->arg[2]; | 
 | 	p_data->size = p_msg->payload_length; | 
 | 	p_data->chan = chan; | 
 | 	pr_debug("%s: put to FIFO pa=0x%016x, cmd=%x, size=%u\n", __func__, | 
 | 	       (unsigned int)p_data->paddr, p_data->command, | 
 | 	       (unsigned int)p_data->size); | 
 | 	ret = kfifo_in_spinlocked(&chan->ctrl->svc_fifo, p_data, | 
 | 				  sizeof(*p_data), | 
 | 				  &chan->ctrl->svc_fifo_lock); | 
 |  | 
 | 	kfree(p_data); | 
 |  | 
 | 	if (!ret) | 
 | 		return -ENOBUFS; | 
 |  | 
 | 	return 0; | 
 | } | 
 | EXPORT_SYMBOL_GPL(stratix10_svc_send); | 
 |  | 
 | /** | 
 |  * stratix10_svc_done() - complete service request transactions | 
 |  * @chan: service channel assigned to the client | 
 |  * | 
 |  * This function should be called when client has finished its request | 
 |  * or there is an error in the request process. It allows the service layer | 
 |  * to stop the running thread to have maximize savings in kernel resources. | 
 |  */ | 
 | void stratix10_svc_done(struct stratix10_svc_chan *chan) | 
 | { | 
 | 	/* stop thread when thread is running AND only one active client */ | 
 | 	if (chan->ctrl->task && chan->ctrl->num_active_client <= 1) { | 
 | 		pr_debug("svc_smc_hvc_shm_thread is stopped\n"); | 
 | 		kthread_stop(chan->ctrl->task); | 
 | 		chan->ctrl->task = NULL; | 
 | 	} | 
 | } | 
 | EXPORT_SYMBOL_GPL(stratix10_svc_done); | 
 |  | 
 | /** | 
 |  * stratix10_svc_allocate_memory() - allocate memory | 
 |  * @chan: service channel assigned to the client | 
 |  * @size: memory size requested by a specific service client | 
 |  * | 
 |  * Service layer allocates the requested number of bytes buffer from the | 
 |  * memory pool, service client uses this function to get allocated buffers. | 
 |  * | 
 |  * Return: address of allocated memory on success, or ERR_PTR() on error. | 
 |  */ | 
 | void *stratix10_svc_allocate_memory(struct stratix10_svc_chan *chan, | 
 | 				    size_t size) | 
 | { | 
 | 	struct stratix10_svc_data_mem *pmem; | 
 | 	unsigned long va; | 
 | 	phys_addr_t pa; | 
 | 	struct gen_pool *genpool = chan->ctrl->genpool; | 
 | 	size_t s = roundup(size, 1 << genpool->min_alloc_order); | 
 |  | 
 | 	pmem = devm_kzalloc(chan->ctrl->dev, sizeof(*pmem), GFP_KERNEL); | 
 | 	if (!pmem) | 
 | 		return ERR_PTR(-ENOMEM); | 
 |  | 
 | 	va = gen_pool_alloc(genpool, s); | 
 | 	if (!va) | 
 | 		return ERR_PTR(-ENOMEM); | 
 |  | 
 | 	memset((void *)va, 0, s); | 
 | 	pa = gen_pool_virt_to_phys(genpool, va); | 
 |  | 
 | 	pmem->vaddr = (void *)va; | 
 | 	pmem->paddr = pa; | 
 | 	pmem->size = s; | 
 | 	list_add_tail(&pmem->node, &svc_data_mem); | 
 | 	pr_debug("%s: va=%p, pa=0x%016x\n", __func__, | 
 | 		 pmem->vaddr, (unsigned int)pmem->paddr); | 
 |  | 
 | 	return (void *)va; | 
 | } | 
 | EXPORT_SYMBOL_GPL(stratix10_svc_allocate_memory); | 
 |  | 
 | /** | 
 |  * stratix10_svc_free_memory() - free allocated memory | 
 |  * @chan: service channel assigned to the client | 
 |  * @kaddr: memory to be freed | 
 |  * | 
 |  * This function is used by service client to free allocated buffers. | 
 |  */ | 
 | void stratix10_svc_free_memory(struct stratix10_svc_chan *chan, void *kaddr) | 
 | { | 
 | 	struct stratix10_svc_data_mem *pmem; | 
 |  | 
 | 	list_for_each_entry(pmem, &svc_data_mem, node) | 
 | 		if (pmem->vaddr == kaddr) { | 
 | 			gen_pool_free(chan->ctrl->genpool, | 
 | 				       (unsigned long)kaddr, pmem->size); | 
 | 			pmem->vaddr = NULL; | 
 | 			list_del(&pmem->node); | 
 | 			return; | 
 | 		} | 
 |  | 
 | 	list_del(&svc_data_mem); | 
 | } | 
 | EXPORT_SYMBOL_GPL(stratix10_svc_free_memory); | 
 |  | 
 | static const struct of_device_id stratix10_svc_drv_match[] = { | 
 | 	{.compatible = "intel,stratix10-svc"}, | 
 | 	{.compatible = "intel,agilex-svc"}, | 
 | 	{}, | 
 | }; | 
 |  | 
 | static int stratix10_svc_drv_probe(struct platform_device *pdev) | 
 | { | 
 | 	struct device *dev = &pdev->dev; | 
 | 	struct stratix10_svc_controller *controller; | 
 | 	struct stratix10_svc_chan *chans; | 
 | 	struct gen_pool *genpool; | 
 | 	struct stratix10_svc_sh_memory *sh_memory; | 
 | 	struct stratix10_svc *svc; | 
 |  | 
 | 	svc_invoke_fn *invoke_fn; | 
 | 	size_t fifo_size; | 
 | 	int ret; | 
 |  | 
 | 	/* get SMC or HVC function */ | 
 | 	invoke_fn = get_invoke_func(dev); | 
 | 	if (IS_ERR(invoke_fn)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	sh_memory = devm_kzalloc(dev, sizeof(*sh_memory), GFP_KERNEL); | 
 | 	if (!sh_memory) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	sh_memory->invoke_fn = invoke_fn; | 
 | 	ret = svc_get_sh_memory(pdev, sh_memory); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	genpool = svc_create_memory_pool(pdev, sh_memory); | 
 | 	if (IS_ERR(genpool)) | 
 | 		return PTR_ERR(genpool); | 
 |  | 
 | 	/* allocate service controller and supporting channel */ | 
 | 	controller = devm_kzalloc(dev, sizeof(*controller), GFP_KERNEL); | 
 | 	if (!controller) { | 
 | 		ret = -ENOMEM; | 
 | 		goto err_destroy_pool; | 
 | 	} | 
 |  | 
 | 	chans = devm_kmalloc_array(dev, SVC_NUM_CHANNEL, | 
 | 				   sizeof(*chans), GFP_KERNEL | __GFP_ZERO); | 
 | 	if (!chans) { | 
 | 		ret = -ENOMEM; | 
 | 		goto err_destroy_pool; | 
 | 	} | 
 |  | 
 | 	controller->dev = dev; | 
 | 	controller->num_chans = SVC_NUM_CHANNEL; | 
 | 	controller->num_active_client = 0; | 
 | 	controller->chans = chans; | 
 | 	controller->genpool = genpool; | 
 | 	controller->task = NULL; | 
 | 	controller->invoke_fn = invoke_fn; | 
 | 	init_completion(&controller->complete_status); | 
 |  | 
 | 	fifo_size = sizeof(struct stratix10_svc_data) * SVC_NUM_DATA_IN_FIFO; | 
 | 	ret = kfifo_alloc(&controller->svc_fifo, fifo_size, GFP_KERNEL); | 
 | 	if (ret) { | 
 | 		dev_err(dev, "failed to allocate FIFO\n"); | 
 | 		goto err_destroy_pool; | 
 | 	} | 
 | 	spin_lock_init(&controller->svc_fifo_lock); | 
 |  | 
 | 	chans[0].scl = NULL; | 
 | 	chans[0].ctrl = controller; | 
 | 	chans[0].name = SVC_CLIENT_FPGA; | 
 | 	spin_lock_init(&chans[0].lock); | 
 |  | 
 | 	chans[1].scl = NULL; | 
 | 	chans[1].ctrl = controller; | 
 | 	chans[1].name = SVC_CLIENT_RSU; | 
 | 	spin_lock_init(&chans[1].lock); | 
 |  | 
 | 	chans[2].scl = NULL; | 
 | 	chans[2].ctrl = controller; | 
 | 	chans[2].name = SVC_CLIENT_FCS; | 
 | 	spin_lock_init(&chans[2].lock); | 
 |  | 
 | 	list_add_tail(&controller->node, &svc_ctrl); | 
 | 	platform_set_drvdata(pdev, controller); | 
 |  | 
 | 	/* add svc client device(s) */ | 
 | 	svc = devm_kzalloc(dev, sizeof(*svc), GFP_KERNEL); | 
 | 	if (!svc) { | 
 | 		ret = -ENOMEM; | 
 | 		goto err_free_kfifo; | 
 | 	} | 
 |  | 
 | 	svc->stratix10_svc_rsu = platform_device_alloc(STRATIX10_RSU, 0); | 
 | 	if (!svc->stratix10_svc_rsu) { | 
 | 		dev_err(dev, "failed to allocate %s device\n", STRATIX10_RSU); | 
 | 		ret = -ENOMEM; | 
 | 		goto err_free_kfifo; | 
 | 	} | 
 |  | 
 | 	ret = platform_device_add(svc->stratix10_svc_rsu); | 
 | 	if (ret) { | 
 | 		platform_device_put(svc->stratix10_svc_rsu); | 
 | 		goto err_free_kfifo; | 
 | 	} | 
 |  | 
 | 	svc->intel_svc_fcs = platform_device_alloc(INTEL_FCS, 1); | 
 | 	if (!svc->intel_svc_fcs) { | 
 | 		dev_err(dev, "failed to allocate %s device\n", INTEL_FCS); | 
 | 		ret = -ENOMEM; | 
 | 		goto err_unregister_rsu_dev; | 
 | 	} | 
 |  | 
 | 	ret = platform_device_add(svc->intel_svc_fcs); | 
 | 	if (ret) { | 
 | 		platform_device_put(svc->intel_svc_fcs); | 
 | 		goto err_unregister_rsu_dev; | 
 | 	} | 
 |  | 
 | 	ret = of_platform_default_populate(dev_of_node(dev), NULL, dev); | 
 | 	if (ret) | 
 | 		goto err_unregister_fcs_dev; | 
 |  | 
 | 	dev_set_drvdata(dev, svc); | 
 |  | 
 | 	pr_info("Intel Service Layer Driver Initialized\n"); | 
 |  | 
 | 	return 0; | 
 |  | 
 | err_unregister_fcs_dev: | 
 | 	platform_device_unregister(svc->intel_svc_fcs); | 
 | err_unregister_rsu_dev: | 
 | 	platform_device_unregister(svc->stratix10_svc_rsu); | 
 | err_free_kfifo: | 
 | 	kfifo_free(&controller->svc_fifo); | 
 | err_destroy_pool: | 
 | 	gen_pool_destroy(genpool); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static void stratix10_svc_drv_remove(struct platform_device *pdev) | 
 | { | 
 | 	struct stratix10_svc *svc = dev_get_drvdata(&pdev->dev); | 
 | 	struct stratix10_svc_controller *ctrl = platform_get_drvdata(pdev); | 
 |  | 
 | 	of_platform_depopulate(ctrl->dev); | 
 |  | 
 | 	platform_device_unregister(svc->intel_svc_fcs); | 
 | 	platform_device_unregister(svc->stratix10_svc_rsu); | 
 |  | 
 | 	kfifo_free(&ctrl->svc_fifo); | 
 | 	if (ctrl->task) { | 
 | 		kthread_stop(ctrl->task); | 
 | 		ctrl->task = NULL; | 
 | 	} | 
 | 	if (ctrl->genpool) | 
 | 		gen_pool_destroy(ctrl->genpool); | 
 | 	list_del(&ctrl->node); | 
 | } | 
 |  | 
 | static struct platform_driver stratix10_svc_driver = { | 
 | 	.probe = stratix10_svc_drv_probe, | 
 | 	.remove = stratix10_svc_drv_remove, | 
 | 	.driver = { | 
 | 		.name = "stratix10-svc", | 
 | 		.of_match_table = stratix10_svc_drv_match, | 
 | 	}, | 
 | }; | 
 |  | 
 | static int __init stratix10_svc_init(void) | 
 | { | 
 | 	struct device_node *fw_np; | 
 | 	struct device_node *np; | 
 | 	int ret; | 
 |  | 
 | 	fw_np = of_find_node_by_name(NULL, "firmware"); | 
 | 	if (!fw_np) | 
 | 		return -ENODEV; | 
 |  | 
 | 	np = of_find_matching_node(fw_np, stratix10_svc_drv_match); | 
 | 	if (!np) | 
 | 		return -ENODEV; | 
 |  | 
 | 	of_node_put(np); | 
 | 	ret = of_platform_populate(fw_np, stratix10_svc_drv_match, NULL, NULL); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	return platform_driver_register(&stratix10_svc_driver); | 
 | } | 
 |  | 
 | static void __exit stratix10_svc_exit(void) | 
 | { | 
 | 	return platform_driver_unregister(&stratix10_svc_driver); | 
 | } | 
 |  | 
 | subsys_initcall(stratix10_svc_init); | 
 | module_exit(stratix10_svc_exit); | 
 |  | 
 | MODULE_LICENSE("GPL v2"); | 
 | MODULE_DESCRIPTION("Intel Stratix10 Service Layer Driver"); | 
 | MODULE_AUTHOR("Richard Gong <richard.gong@intel.com>"); | 
 | MODULE_ALIAS("platform:stratix10-svc"); |