blob: 12be05b16880aacc05d896d15564fd548686bb55 [file] [log] [blame]
/*
* Copyright 2011 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/dma-mapping.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/time.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
#include <sound/saif.h>
#include <mach/dma.h>
#include <asm/mach-types.h>
#include <mach/hardware.h>
#include <mach/mxs.h>
#include "mxs-saif.h"
static struct mxs_saif *mxs_saif[2];
/*
* SAIF is a little different with other normal SOC DAIs on clock using.
*
* For MXS, two SAIF modules are instantiated on-chip.
* Each SAIF has a set of clock pins and can be operating in master
* mode simultaneously if they are connected to different off-chip codecs.
* Also, one of the two SAIFs can master or drive the clock pins while the
* other SAIF, in slave mode, receives clocking from the master SAIF.
* This also means that both SAIFs must operate at the same sample rate.
*
* We abstract this as each saif has a master, the master could be
* himself or other saifs. In the generic saif driver, saif does not need
* to know the different clkmux. Saif only needs to know who is his master
* and operating his master to generate the proper clock rate for him.
* The master id is provided in mach-specific layer according to different
* clkmux setting.
*/
static int mxs_saif_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
int clk_id, unsigned int freq, int dir)
{
struct mxs_saif *saif = snd_soc_dai_get_drvdata(cpu_dai);
switch (clk_id) {
case MXS_SAIF_MCLK:
saif->mclk = freq;
break;
default:
return -EINVAL;
}
return 0;
}
/*
* Since SAIF may work on EXTMASTER mode, IOW, it's working BITCLK&LRCLK
* is provided by other SAIF, we provide a interface here to get its master
* from its master_id.
* Note that the master could be himself.
*/
static inline struct mxs_saif *mxs_saif_get_master(struct mxs_saif * saif)
{
return mxs_saif[saif->master_id];
}
/*
* Set SAIF clock and MCLK
*/
static int mxs_saif_set_clk(struct mxs_saif *saif,
unsigned int mclk,
unsigned int rate)
{
u32 scr;
int ret;
struct mxs_saif *master_saif;
dev_dbg(saif->dev, "mclk %d rate %d\n", mclk, rate);
/* Set master saif to generate proper clock */
master_saif = mxs_saif_get_master(saif);
if (!master_saif)
return -EINVAL;
dev_dbg(saif->dev, "master saif%d\n", master_saif->id);
/* Checking if can playback and capture simutaneously */
if (master_saif->ongoing && rate != master_saif->cur_rate) {
dev_err(saif->dev,
"can not change clock, master saif%d(rate %d) is ongoing\n",
master_saif->id, master_saif->cur_rate);
return -EINVAL;
}
scr = __raw_readl(master_saif->base + SAIF_CTRL);
scr &= ~BM_SAIF_CTRL_BITCLK_MULT_RATE;
scr &= ~BM_SAIF_CTRL_BITCLK_BASE_RATE;
/*
* Set SAIF clock
*
* The SAIF clock should be either 384*fs or 512*fs.
* If MCLK is used, the SAIF clk ratio need to match mclk ratio.
* For 32x mclk, set saif clk as 512*fs.
* For 48x mclk, set saif clk as 384*fs.
*
* If MCLK is not used, we just set saif clk to 512*fs.
*/
clk_prepare_enable(master_saif->clk);
if (master_saif->mclk_in_use) {
if (mclk % 32 == 0) {
scr &= ~BM_SAIF_CTRL_BITCLK_BASE_RATE;
ret = clk_set_rate(master_saif->clk, 512 * rate);
} else if (mclk % 48 == 0) {
scr |= BM_SAIF_CTRL_BITCLK_BASE_RATE;
ret = clk_set_rate(master_saif->clk, 384 * rate);
} else {
/* SAIF MCLK should be either 32x or 48x */
clk_disable_unprepare(master_saif->clk);
return -EINVAL;
}
} else {
ret = clk_set_rate(master_saif->clk, 512 * rate);
scr &= ~BM_SAIF_CTRL_BITCLK_BASE_RATE;
}
clk_disable_unprepare(master_saif->clk);
if (ret)
return ret;
master_saif->cur_rate = rate;
if (!master_saif->mclk_in_use) {
__raw_writel(scr, master_saif->base + SAIF_CTRL);
return 0;
}
/*
* Program the over-sample rate for MCLK output
*
* The available MCLK range is 32x, 48x... 512x. The rate
* could be from 8kHz to 192kH.
*/
switch (mclk / rate) {
case 32:
scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(4);
break;
case 64:
scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(3);
break;
case 128:
scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(2);
break;
case 256:
scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(1);
break;
case 512:
scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(0);
break;
case 48:
scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(3);
break;
case 96:
scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(2);
break;
case 192:
scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(1);
break;
case 384:
scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(0);
break;
default:
return -EINVAL;
}
__raw_writel(scr, master_saif->base + SAIF_CTRL);
return 0;
}
/*
* Put and disable MCLK.
*/
int mxs_saif_put_mclk(unsigned int saif_id)
{
struct mxs_saif *saif = mxs_saif[saif_id];
u32 stat;
if (!saif)
return -EINVAL;
stat = __raw_readl(saif->base + SAIF_STAT);
if (stat & BM_SAIF_STAT_BUSY) {
dev_err(saif->dev, "error: busy\n");
return -EBUSY;
}
clk_disable_unprepare(saif->clk);
/* disable MCLK output */
__raw_writel(BM_SAIF_CTRL_CLKGATE,
saif->base + SAIF_CTRL + MXS_SET_ADDR);
__raw_writel(BM_SAIF_CTRL_RUN,
saif->base + SAIF_CTRL + MXS_CLR_ADDR);
saif->mclk_in_use = 0;
return 0;
}
/*
* Get MCLK and set clock rate, then enable it
*
* This interface is used for codecs who are using MCLK provided
* by saif.
*/
int mxs_saif_get_mclk(unsigned int saif_id, unsigned int mclk,
unsigned int rate)
{
struct mxs_saif *saif = mxs_saif[saif_id];
u32 stat;
int ret;
struct mxs_saif *master_saif;
if (!saif)
return -EINVAL;
/* Clear Reset */
__raw_writel(BM_SAIF_CTRL_SFTRST,
saif->base + SAIF_CTRL + MXS_CLR_ADDR);
/* FIXME: need clear clk gate for register r/w */
__raw_writel(BM_SAIF_CTRL_CLKGATE,
saif->base + SAIF_CTRL + MXS_CLR_ADDR);
master_saif = mxs_saif_get_master(saif);
if (saif != master_saif) {
dev_err(saif->dev, "can not get mclk from a non-master saif\n");
return -EINVAL;
}
stat = __raw_readl(saif->base + SAIF_STAT);
if (stat & BM_SAIF_STAT_BUSY) {
dev_err(saif->dev, "error: busy\n");
return -EBUSY;
}
saif->mclk_in_use = 1;
ret = mxs_saif_set_clk(saif, mclk, rate);
if (ret)
return ret;
ret = clk_prepare_enable(saif->clk);
if (ret)
return ret;
/* enable MCLK output */
__raw_writel(BM_SAIF_CTRL_RUN,
saif->base + SAIF_CTRL + MXS_SET_ADDR);
return 0;
}
/*
* SAIF DAI format configuration.
* Should only be called when port is inactive.
*/
static int mxs_saif_set_dai_fmt(struct snd_soc_dai *cpu_dai, unsigned int fmt)
{
u32 scr, stat;
u32 scr0;
struct mxs_saif *saif = snd_soc_dai_get_drvdata(cpu_dai);
stat = __raw_readl(saif->base + SAIF_STAT);
if (stat & BM_SAIF_STAT_BUSY) {
dev_err(cpu_dai->dev, "error: busy\n");
return -EBUSY;
}
scr0 = __raw_readl(saif->base + SAIF_CTRL);
scr0 = scr0 & ~BM_SAIF_CTRL_BITCLK_EDGE & ~BM_SAIF_CTRL_LRCLK_POLARITY \
& ~BM_SAIF_CTRL_JUSTIFY & ~BM_SAIF_CTRL_DELAY;
scr = 0;
/* DAI mode */
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
case SND_SOC_DAIFMT_I2S:
/* data frame low 1clk before data */
scr |= BM_SAIF_CTRL_DELAY;
scr &= ~BM_SAIF_CTRL_LRCLK_POLARITY;
break;
case SND_SOC_DAIFMT_LEFT_J:
/* data frame high with data */
scr &= ~BM_SAIF_CTRL_DELAY;
scr &= ~BM_SAIF_CTRL_LRCLK_POLARITY;
scr &= ~BM_SAIF_CTRL_JUSTIFY;
break;
default:
return -EINVAL;
}
/* DAI clock inversion */
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
case SND_SOC_DAIFMT_IB_IF:
scr |= BM_SAIF_CTRL_BITCLK_EDGE;
scr |= BM_SAIF_CTRL_LRCLK_POLARITY;
break;
case SND_SOC_DAIFMT_IB_NF:
scr |= BM_SAIF_CTRL_BITCLK_EDGE;
scr &= ~BM_SAIF_CTRL_LRCLK_POLARITY;
break;
case SND_SOC_DAIFMT_NB_IF:
scr &= ~BM_SAIF_CTRL_BITCLK_EDGE;
scr |= BM_SAIF_CTRL_LRCLK_POLARITY;
break;
case SND_SOC_DAIFMT_NB_NF:
scr &= ~BM_SAIF_CTRL_BITCLK_EDGE;
scr &= ~BM_SAIF_CTRL_LRCLK_POLARITY;
break;
}
/*
* Note: We simply just support master mode since SAIF TX can only
* work as master.
* Here the master is relative to codec side.
* Saif internally could be slave when working on EXTMASTER mode.
* We just hide this to machine driver.
*/
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
case SND_SOC_DAIFMT_CBS_CFS:
if (saif->id == saif->master_id)
scr &= ~BM_SAIF_CTRL_SLAVE_MODE;
else
scr |= BM_SAIF_CTRL_SLAVE_MODE;
__raw_writel(scr | scr0, saif->base + SAIF_CTRL);
break;
default:
return -EINVAL;
}
return 0;
}
static int mxs_saif_startup(struct snd_pcm_substream *substream,
struct snd_soc_dai *cpu_dai)
{
struct mxs_saif *saif = snd_soc_dai_get_drvdata(cpu_dai);
snd_soc_dai_set_dma_data(cpu_dai, substream, &saif->dma_param);
/* clear error status to 0 for each re-open */
saif->fifo_underrun = 0;
saif->fifo_overrun = 0;
/* Clear Reset for normal operations */
__raw_writel(BM_SAIF_CTRL_SFTRST,
saif->base + SAIF_CTRL + MXS_CLR_ADDR);
/* clear clock gate */
__raw_writel(BM_SAIF_CTRL_CLKGATE,
saif->base + SAIF_CTRL + MXS_CLR_ADDR);
return 0;
}
/*
* Should only be called when port is inactive.
* although can be called multiple times by upper layers.
*/
static int mxs_saif_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params,
struct snd_soc_dai *cpu_dai)
{
struct mxs_saif *saif = snd_soc_dai_get_drvdata(cpu_dai);
u32 scr, stat;
int ret;
/* mclk should already be set */
if (!saif->mclk && saif->mclk_in_use) {
dev_err(cpu_dai->dev, "set mclk first\n");
return -EINVAL;
}
stat = __raw_readl(saif->base + SAIF_STAT);
if (stat & BM_SAIF_STAT_BUSY) {
dev_err(cpu_dai->dev, "error: busy\n");
return -EBUSY;
}
/*
* Set saif clk based on sample rate.
* If mclk is used, we also set mclk, if not, saif->mclk is
* default 0, means not used.
*/
ret = mxs_saif_set_clk(saif, saif->mclk, params_rate(params));
if (ret) {
dev_err(cpu_dai->dev, "unable to get proper clk\n");
return ret;
}
scr = __raw_readl(saif->base + SAIF_CTRL);
scr &= ~BM_SAIF_CTRL_WORD_LENGTH;
scr &= ~BM_SAIF_CTRL_BITCLK_48XFS_ENABLE;
switch (params_format(params)) {
case SNDRV_PCM_FORMAT_S16_LE:
scr |= BF_SAIF_CTRL_WORD_LENGTH(0);
break;
case SNDRV_PCM_FORMAT_S20_3LE:
scr |= BF_SAIF_CTRL_WORD_LENGTH(4);
scr |= BM_SAIF_CTRL_BITCLK_48XFS_ENABLE;
break;
case SNDRV_PCM_FORMAT_S24_LE:
scr |= BF_SAIF_CTRL_WORD_LENGTH(8);
scr |= BM_SAIF_CTRL_BITCLK_48XFS_ENABLE;
break;
default:
return -EINVAL;
}
/* Tx/Rx config */
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
/* enable TX mode */
scr &= ~BM_SAIF_CTRL_READ_MODE;
} else {
/* enable RX mode */
scr |= BM_SAIF_CTRL_READ_MODE;
}
__raw_writel(scr, saif->base + SAIF_CTRL);
return 0;
}
static int mxs_saif_prepare(struct snd_pcm_substream *substream,
struct snd_soc_dai *cpu_dai)
{
struct mxs_saif *saif = snd_soc_dai_get_drvdata(cpu_dai);
/* enable FIFO error irqs */
__raw_writel(BM_SAIF_CTRL_FIFO_ERROR_IRQ_EN,
saif->base + SAIF_CTRL + MXS_SET_ADDR);
return 0;
}
static int mxs_saif_trigger(struct snd_pcm_substream *substream, int cmd,
struct snd_soc_dai *cpu_dai)
{
struct mxs_saif *saif = snd_soc_dai_get_drvdata(cpu_dai);
struct mxs_saif *master_saif;
u32 delay;
master_saif = mxs_saif_get_master(saif);
if (!master_saif)
return -EINVAL;
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
case SNDRV_PCM_TRIGGER_RESUME:
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
dev_dbg(cpu_dai->dev, "start\n");
clk_enable(master_saif->clk);
if (!master_saif->mclk_in_use)
__raw_writel(BM_SAIF_CTRL_RUN,
master_saif->base + SAIF_CTRL + MXS_SET_ADDR);
/*
* If the saif's master is not himself, we also need to enable
* itself clk for its internal basic logic to work.
*/
if (saif != master_saif) {
clk_enable(saif->clk);
__raw_writel(BM_SAIF_CTRL_RUN,
saif->base + SAIF_CTRL + MXS_SET_ADDR);
}
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
/*
* write a data to saif data register to trigger
* the transfer
*/
__raw_writel(0, saif->base + SAIF_DATA);
} else {
/*
* read a data from saif data register to trigger
* the receive
*/
__raw_readl(saif->base + SAIF_DATA);
}
master_saif->ongoing = 1;
dev_dbg(saif->dev, "CTRL 0x%x STAT 0x%x\n",
__raw_readl(saif->base + SAIF_CTRL),
__raw_readl(saif->base + SAIF_STAT));
dev_dbg(master_saif->dev, "CTRL 0x%x STAT 0x%x\n",
__raw_readl(master_saif->base + SAIF_CTRL),
__raw_readl(master_saif->base + SAIF_STAT));
break;
case SNDRV_PCM_TRIGGER_SUSPEND:
case SNDRV_PCM_TRIGGER_STOP:
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
dev_dbg(cpu_dai->dev, "stop\n");
/* wait a while for the current sample to complete */
delay = USEC_PER_SEC / master_saif->cur_rate;
if (!master_saif->mclk_in_use) {
__raw_writel(BM_SAIF_CTRL_RUN,
master_saif->base + SAIF_CTRL + MXS_CLR_ADDR);
udelay(delay);
}
clk_disable(master_saif->clk);
if (saif != master_saif) {
__raw_writel(BM_SAIF_CTRL_RUN,
saif->base + SAIF_CTRL + MXS_CLR_ADDR);
udelay(delay);
clk_disable(saif->clk);
}
master_saif->ongoing = 0;
break;
default:
return -EINVAL;
}
return 0;
}
#define MXS_SAIF_RATES SNDRV_PCM_RATE_8000_192000
#define MXS_SAIF_FORMATS \
(SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \
SNDRV_PCM_FMTBIT_S24_LE)
static const struct snd_soc_dai_ops mxs_saif_dai_ops = {
.startup = mxs_saif_startup,
.trigger = mxs_saif_trigger,
.prepare = mxs_saif_prepare,
.hw_params = mxs_saif_hw_params,
.set_sysclk = mxs_saif_set_dai_sysclk,
.set_fmt = mxs_saif_set_dai_fmt,
};
static int mxs_saif_dai_probe(struct snd_soc_dai *dai)
{
struct mxs_saif *saif = dev_get_drvdata(dai->dev);
snd_soc_dai_set_drvdata(dai, saif);
return 0;
}
static struct snd_soc_dai_driver mxs_saif_dai = {
.name = "mxs-saif",
.probe = mxs_saif_dai_probe,
.playback = {
.channels_min = 2,
.channels_max = 2,
.rates = MXS_SAIF_RATES,
.formats = MXS_SAIF_FORMATS,
},
.capture = {
.channels_min = 2,
.channels_max = 2,
.rates = MXS_SAIF_RATES,
.formats = MXS_SAIF_FORMATS,
},
.ops = &mxs_saif_dai_ops,
};
static irqreturn_t mxs_saif_irq(int irq, void *dev_id)
{
struct mxs_saif *saif = dev_id;
unsigned int stat;
stat = __raw_readl(saif->base + SAIF_STAT);
if (!(stat & (BM_SAIF_STAT_FIFO_UNDERFLOW_IRQ |
BM_SAIF_STAT_FIFO_OVERFLOW_IRQ)))
return IRQ_NONE;
if (stat & BM_SAIF_STAT_FIFO_UNDERFLOW_IRQ) {
dev_dbg(saif->dev, "underrun!!! %d\n", ++saif->fifo_underrun);
__raw_writel(BM_SAIF_STAT_FIFO_UNDERFLOW_IRQ,
saif->base + SAIF_STAT + MXS_CLR_ADDR);
}
if (stat & BM_SAIF_STAT_FIFO_OVERFLOW_IRQ) {
dev_dbg(saif->dev, "overrun!!! %d\n", ++saif->fifo_overrun);
__raw_writel(BM_SAIF_STAT_FIFO_OVERFLOW_IRQ,
saif->base + SAIF_STAT + MXS_CLR_ADDR);
}
dev_dbg(saif->dev, "SAIF_CTRL %x SAIF_STAT %x\n",
__raw_readl(saif->base + SAIF_CTRL),
__raw_readl(saif->base + SAIF_STAT));
return IRQ_HANDLED;
}
static int mxs_saif_probe(struct platform_device *pdev)
{
struct resource *iores, *dmares;
struct mxs_saif *saif;
struct mxs_saif_platform_data *pdata;
int ret = 0;
if (pdev->id >= ARRAY_SIZE(mxs_saif))
return -EINVAL;
saif = devm_kzalloc(&pdev->dev, sizeof(*saif), GFP_KERNEL);
if (!saif)
return -ENOMEM;
mxs_saif[pdev->id] = saif;
saif->id = pdev->id;
pdata = pdev->dev.platform_data;
if (pdata && !pdata->master_mode) {
saif->master_id = pdata->master_id;
if (saif->master_id < 0 ||
saif->master_id >= ARRAY_SIZE(mxs_saif) ||
saif->master_id == saif->id) {
dev_err(&pdev->dev, "get wrong master id\n");
return -EINVAL;
}
} else {
saif->master_id = saif->id;
}
saif->clk = clk_get(&pdev->dev, NULL);
if (IS_ERR(saif->clk)) {
ret = PTR_ERR(saif->clk);
dev_err(&pdev->dev, "Cannot get the clock: %d\n",
ret);
return ret;
}
iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
saif->base = devm_request_and_ioremap(&pdev->dev, iores);
if (!saif->base) {
dev_err(&pdev->dev, "ioremap failed\n");
ret = -ENODEV;
goto failed_get_resource;
}
dmares = platform_get_resource(pdev, IORESOURCE_DMA, 0);
if (!dmares) {
ret = -ENODEV;
dev_err(&pdev->dev, "failed to get dma resource: %d\n",
ret);
goto failed_get_resource;
}
saif->dma_param.chan_num = dmares->start;
saif->irq = platform_get_irq(pdev, 0);
if (saif->irq < 0) {
ret = saif->irq;
dev_err(&pdev->dev, "failed to get irq resource: %d\n",
ret);
goto failed_get_resource;
}
saif->dev = &pdev->dev;
ret = devm_request_irq(&pdev->dev, saif->irq, mxs_saif_irq, 0,
"mxs-saif", saif);
if (ret) {
dev_err(&pdev->dev, "failed to request irq\n");
goto failed_get_resource;
}
saif->dma_param.chan_irq = platform_get_irq(pdev, 1);
if (saif->dma_param.chan_irq < 0) {
ret = saif->dma_param.chan_irq;
dev_err(&pdev->dev, "failed to get dma irq resource: %d\n",
ret);
goto failed_get_resource;
}
platform_set_drvdata(pdev, saif);
ret = snd_soc_register_dai(&pdev->dev, &mxs_saif_dai);
if (ret) {
dev_err(&pdev->dev, "register DAI failed\n");
goto failed_get_resource;
}
saif->soc_platform_pdev = platform_device_alloc(
"mxs-pcm-audio", pdev->id);
if (!saif->soc_platform_pdev) {
ret = -ENOMEM;
goto failed_pdev_alloc;
}
platform_set_drvdata(saif->soc_platform_pdev, saif);
ret = platform_device_add(saif->soc_platform_pdev);
if (ret) {
dev_err(&pdev->dev, "failed to add soc platform device\n");
goto failed_pdev_add;
}
return 0;
failed_pdev_add:
platform_device_put(saif->soc_platform_pdev);
failed_pdev_alloc:
snd_soc_unregister_dai(&pdev->dev);
failed_get_resource:
clk_put(saif->clk);
return ret;
}
static int __devexit mxs_saif_remove(struct platform_device *pdev)
{
struct mxs_saif *saif = platform_get_drvdata(pdev);
platform_device_unregister(saif->soc_platform_pdev);
snd_soc_unregister_dai(&pdev->dev);
clk_put(saif->clk);
return 0;
}
static struct platform_driver mxs_saif_driver = {
.probe = mxs_saif_probe,
.remove = __devexit_p(mxs_saif_remove),
.driver = {
.name = "mxs-saif",
.owner = THIS_MODULE,
},
};
module_platform_driver(mxs_saif_driver);
MODULE_AUTHOR("Freescale Semiconductor, Inc.");
MODULE_DESCRIPTION("MXS ASoC SAIF driver");
MODULE_LICENSE("GPL");