blob: 9a50bcc59594c50eebca92b3bfa822bf774b9070 [file] [log] [blame]
/*
* SBE 2T3E3 synchronous serial card driver for Linux
*
* Copyright (C) 2009-2010 Krzysztof Halasa <khc@pm.waw.pl>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License
* as published by the Free Software Foundation.
*
* This code is based on a driver written by SBE Inc.
*/
#include <linux/ip.h>
#include "2t3e3.h"
#include "ctrl.h"
/* All access to registers done via the 21143 on port 0 must be
* protected via the card->bootrom_lock. */
/* priviate define to be used here only - must be protected by card->bootrom_lock */
#define cpld_write_nolock(channel, reg, val) \
bootrom_write((channel), CPLD_MAP_REG(reg, channel), val)
u32 cpld_read(struct channel *channel, u32 reg)
{
unsigned long flags;
u32 val;
spin_lock_irqsave(&channel->card->bootrom_lock, flags);
val = bootrom_read((channel), CPLD_MAP_REG(reg, channel));
spin_unlock_irqrestore(&channel->card->bootrom_lock, flags);
return val;
}
/****************************************
* Access via BootROM port
****************************************/
u32 bootrom_read(struct channel *channel, u32 reg)
{
unsigned long addr = channel->card->bootrom_addr;
u32 result;
/* select BootROM address */
dc_write(addr, SBE_2T3E3_21143_REG_BOOT_ROM_PROGRAMMING_ADDRESS, reg & 0x3FFFF);
/* select reading from BootROM */
dc_write(addr, SBE_2T3E3_21143_REG_BOOT_ROM_SERIAL_ROM_AND_MII_MANAGEMENT,
SBE_2T3E3_21143_VAL_READ_OPERATION |
SBE_2T3E3_21143_VAL_BOOT_ROM_SELECT);
udelay(2); /* 20 PCI cycles */
/* read from BootROM */
result = dc_read(addr, SBE_2T3E3_21143_REG_BOOT_ROM_SERIAL_ROM_AND_MII_MANAGEMENT) & 0xff;
/* reset CSR9 */
dc_write(addr, SBE_2T3E3_21143_REG_BOOT_ROM_SERIAL_ROM_AND_MII_MANAGEMENT, 0);
return result;
}
void bootrom_write(struct channel *channel, u32 reg, u32 val)
{
unsigned long addr = channel->card->bootrom_addr;
/* select BootROM address */
dc_write(addr, SBE_2T3E3_21143_REG_BOOT_ROM_PROGRAMMING_ADDRESS, reg & 0x3FFFF);
/* select writting to BootROM */
dc_write(addr, SBE_2T3E3_21143_REG_BOOT_ROM_SERIAL_ROM_AND_MII_MANAGEMENT,
SBE_2T3E3_21143_VAL_WRITE_OPERATION |
SBE_2T3E3_21143_VAL_BOOT_ROM_SELECT |
(val & 0xff));
udelay(2); /* 20 PCI cycles */
/* reset CSR9 */
dc_write(addr, SBE_2T3E3_21143_REG_BOOT_ROM_SERIAL_ROM_AND_MII_MANAGEMENT, 0);
}
/****************************************
* Access via Serial I/O port
****************************************/
static u32 serialrom_read_bit(struct channel *channel)
{
unsigned long addr = channel->card->bootrom_addr;
u32 bit;
dc_write(addr, SBE_2T3E3_21143_REG_BOOT_ROM_SERIAL_ROM_AND_MII_MANAGEMENT,
SBE_2T3E3_21143_VAL_READ_OPERATION |
SBE_2T3E3_21143_VAL_SERIAL_ROM_SELECT |
SBE_2T3E3_21143_VAL_SERIAL_ROM_CLOCK |
SBE_2T3E3_21143_VAL_SERIAL_ROM_CHIP_SELECT); /* clock high */
bit = (dc_read(addr, SBE_2T3E3_21143_REG_BOOT_ROM_SERIAL_ROM_AND_MII_MANAGEMENT) &
SBE_2T3E3_21143_VAL_SERIAL_ROM_DATA_OUT) > 0 ? 1 : 0;
dc_write(addr, SBE_2T3E3_21143_REG_BOOT_ROM_SERIAL_ROM_AND_MII_MANAGEMENT,
SBE_2T3E3_21143_VAL_READ_OPERATION |
SBE_2T3E3_21143_VAL_SERIAL_ROM_SELECT |
SBE_2T3E3_21143_VAL_SERIAL_ROM_CHIP_SELECT); /* clock low */
return bit;
}
static void serialrom_write_bit(struct channel *channel, u32 bit)
{
unsigned long addr = channel->card->bootrom_addr;
u32 lastbit = -1;
bit &= 1;
if (bit != lastbit) {
dc_write(addr, SBE_2T3E3_21143_REG_BOOT_ROM_SERIAL_ROM_AND_MII_MANAGEMENT,
SBE_2T3E3_21143_VAL_WRITE_OPERATION |
SBE_2T3E3_21143_VAL_SERIAL_ROM_SELECT |
SBE_2T3E3_21143_VAL_SERIAL_ROM_CHIP_SELECT |
(bit << 2)); /* clock low */
lastbit = bit;
}
dc_write(addr, SBE_2T3E3_21143_REG_BOOT_ROM_SERIAL_ROM_AND_MII_MANAGEMENT,
SBE_2T3E3_21143_VAL_WRITE_OPERATION |
SBE_2T3E3_21143_VAL_SERIAL_ROM_SELECT |
SBE_2T3E3_21143_VAL_SERIAL_ROM_CLOCK |
SBE_2T3E3_21143_VAL_SERIAL_ROM_CHIP_SELECT |
(bit << 2)); /* clock high */
dc_write(addr, SBE_2T3E3_21143_REG_BOOT_ROM_SERIAL_ROM_AND_MII_MANAGEMENT,
SBE_2T3E3_21143_VAL_WRITE_OPERATION |
SBE_2T3E3_21143_VAL_SERIAL_ROM_SELECT |
SBE_2T3E3_21143_VAL_SERIAL_ROM_CHIP_SELECT |
(bit << 2)); /* clock low */
}
/****************************************
* Access to SerialROM (eeprom)
****************************************/
u32 t3e3_eeprom_read_word(struct channel *channel, u32 address)
{
unsigned long addr = channel->card->bootrom_addr;
u32 i, val;
unsigned long flags;
address &= 0x3f;
spin_lock_irqsave(&channel->card->bootrom_lock, flags);
/* select correct Serial Chip */
cpld_write_nolock(channel, SBE_2T3E3_CPLD_REG_SERIAL_CHIP_SELECT,
SBE_2T3E3_CPLD_VAL_EEPROM_SELECT);
/* select reading from Serial I/O Bus */
dc_write(addr, SBE_2T3E3_21143_REG_BOOT_ROM_SERIAL_ROM_AND_MII_MANAGEMENT,
SBE_2T3E3_21143_VAL_READ_OPERATION |
SBE_2T3E3_21143_VAL_SERIAL_ROM_SELECT |
SBE_2T3E3_21143_VAL_SERIAL_ROM_CHIP_SELECT); /* clock low */
/* select read operation */
serialrom_write_bit(channel, 0);
serialrom_write_bit(channel, 1);
serialrom_write_bit(channel, 1);
serialrom_write_bit(channel, 0);
for (i = 0x20; i; i >>= 1)
serialrom_write_bit(channel, address & i ? 1 : 0);
val = 0;
for (i = 0x8000; i; i >>= 1)
val |= (serialrom_read_bit(channel) ? i : 0);
/* Reset 21143's CSR9 */
dc_write(addr, SBE_2T3E3_21143_REG_BOOT_ROM_SERIAL_ROM_AND_MII_MANAGEMENT,
SBE_2T3E3_21143_VAL_READ_OPERATION |
SBE_2T3E3_21143_VAL_SERIAL_ROM_SELECT |
SBE_2T3E3_21143_VAL_SERIAL_ROM_CHIP_SELECT); /* clock low */
dc_write(addr, SBE_2T3E3_21143_REG_BOOT_ROM_SERIAL_ROM_AND_MII_MANAGEMENT, 0);
/* Unselect Serial Chip */
cpld_write_nolock(channel, SBE_2T3E3_CPLD_REG_SERIAL_CHIP_SELECT, 0);
spin_unlock_irqrestore(&channel->card->bootrom_lock, flags);
return ntohs(val);
}
/****************************************
* Access to Framer
****************************************/
u32 exar7250_read(struct channel *channel, u32 reg)
{
u32 result;
unsigned long flags;
#if 0
switch (reg) {
case SBE_2T3E3_FRAMER_REG_OPERATING_MODE:
return channel->framer_regs[reg];
break;
default:
}
#endif
spin_lock_irqsave(&channel->card->bootrom_lock, flags);
result = bootrom_read(channel, cpld_reg_map[SBE_2T3E3_CPLD_REG_FRAMER_BASE_ADDRESS]
[channel->h.slot] + (t3e3_framer_reg_map[reg] << 2));
spin_unlock_irqrestore(&channel->card->bootrom_lock, flags);
return result;
}
void exar7250_write(struct channel *channel, u32 reg, u32 val)
{
unsigned long flags;
val &= 0xff;
channel->framer_regs[reg] = val;
spin_lock_irqsave(&channel->card->bootrom_lock, flags);
bootrom_write(channel, cpld_reg_map[SBE_2T3E3_CPLD_REG_FRAMER_BASE_ADDRESS]
[channel->h.slot] + (t3e3_framer_reg_map[reg] << 2), val);
spin_unlock_irqrestore(&channel->card->bootrom_lock, flags);
}
/****************************************
* Access to LIU
****************************************/
u32 exar7300_read(struct channel *channel, u32 reg)
{
unsigned long addr = channel->card->bootrom_addr, flags;
u32 i, val;
#if 0
switch (reg) {
case SBE_2T3E3_LIU_REG_REG1:
case SBE_2T3E3_LIU_REG_REG2:
case SBE_2T3E3_LIU_REG_REG3:
case SBE_2T3E3_LIU_REG_REG4:
return channel->liu_regs[reg];
break;
default:
}
#endif
/* select correct Serial Chip */
spin_lock_irqsave(&channel->card->bootrom_lock, flags);
cpld_write_nolock(channel, SBE_2T3E3_CPLD_REG_SERIAL_CHIP_SELECT,
cpld_val_map[SBE_2T3E3_CPLD_VAL_LIU_SELECT][channel->h.slot]);
/* select reading from Serial I/O Bus */
dc_write(addr, SBE_2T3E3_21143_REG_BOOT_ROM_SERIAL_ROM_AND_MII_MANAGEMENT,
SBE_2T3E3_21143_VAL_READ_OPERATION |
SBE_2T3E3_21143_VAL_SERIAL_ROM_SELECT |
SBE_2T3E3_21143_VAL_SERIAL_ROM_CHIP_SELECT); /* clock low */
/* select read operation */
serialrom_write_bit(channel, 1);
/* Exar7300 register address is 4 bit long */
reg = t3e3_liu_reg_map[reg];
for (i = 0; i < 4; i++, reg >>= 1) /* 4 bits of SerialROM address */
serialrom_write_bit(channel, reg & 1);
for (i = 0; i < 3; i++) /* remaining 3 bits of SerialROM address */
serialrom_write_bit(channel, 0);
val = 0; /* Exar7300 register value is 5 bit long */
for (i = 0; i < 8; i++) /* 8 bits of SerialROM value */
val += (serialrom_read_bit(channel) << i);
/* Reset 21143's CSR9 */
dc_write(addr, SBE_2T3E3_21143_REG_BOOT_ROM_SERIAL_ROM_AND_MII_MANAGEMENT,
SBE_2T3E3_21143_VAL_READ_OPERATION |
SBE_2T3E3_21143_VAL_SERIAL_ROM_SELECT |
SBE_2T3E3_21143_VAL_SERIAL_ROM_CHIP_SELECT); /* clock low */
dc_write(addr, SBE_2T3E3_21143_REG_BOOT_ROM_SERIAL_ROM_AND_MII_MANAGEMENT, 0);
/* Unselect Serial Chip */
cpld_write_nolock(channel, SBE_2T3E3_CPLD_REG_SERIAL_CHIP_SELECT, 0);
spin_unlock_irqrestore(&channel->card->bootrom_lock, flags);
return val;
}
void exar7300_write(struct channel *channel, u32 reg, u32 val)
{
unsigned long addr = channel->card->bootrom_addr, flags;
u32 i;
channel->liu_regs[reg] = val;
/* select correct Serial Chip */
spin_lock_irqsave(&channel->card->bootrom_lock, flags);
cpld_write_nolock(channel, SBE_2T3E3_CPLD_REG_SERIAL_CHIP_SELECT,
cpld_val_map[SBE_2T3E3_CPLD_VAL_LIU_SELECT][channel->h.slot]);
/* select writting to Serial I/O Bus */
dc_write(addr, SBE_2T3E3_21143_REG_BOOT_ROM_SERIAL_ROM_AND_MII_MANAGEMENT,
SBE_2T3E3_21143_VAL_WRITE_OPERATION |
SBE_2T3E3_21143_VAL_SERIAL_ROM_SELECT |
SBE_2T3E3_21143_VAL_SERIAL_ROM_CHIP_SELECT); /* clock low */
/* select write operation */
serialrom_write_bit(channel, 0);
/* Exar7300 register address is 4 bit long */
reg = t3e3_liu_reg_map[reg];
for (i = 0; i < 4; i++) { /* 4 bits */
serialrom_write_bit(channel, reg & 1);
reg >>= 1;
}
for (i = 0; i < 3; i++) /* remaining 3 bits of SerialROM address */
serialrom_write_bit(channel, 0);
/* Exar7300 register value is 5 bit long */
for (i = 0; i < 5; i++) {
serialrom_write_bit(channel, val & 1);
val >>= 1;
}
for (i = 0; i < 3; i++) /* remaining 3 bits of SerialROM value */
serialrom_write_bit(channel, 0);
/* Reset 21143_CSR9 */
dc_write(addr, SBE_2T3E3_21143_REG_BOOT_ROM_SERIAL_ROM_AND_MII_MANAGEMENT,
SBE_2T3E3_21143_VAL_WRITE_OPERATION |
SBE_2T3E3_21143_VAL_SERIAL_ROM_SELECT |
SBE_2T3E3_21143_VAL_SERIAL_ROM_CHIP_SELECT); /* clock low */
dc_write(addr, SBE_2T3E3_21143_REG_BOOT_ROM_SERIAL_ROM_AND_MII_MANAGEMENT, 0);
/* Unselect Serial Chip */
cpld_write_nolock(channel, SBE_2T3E3_CPLD_REG_SERIAL_CHIP_SELECT, 0);
spin_unlock_irqrestore(&channel->card->bootrom_lock, flags);
}