|  | // SPDX-License-Identifier: GPL-2.0 | 
|  | /* | 
|  | * Special GIC quirks for the ARM RealView | 
|  | * Copyright (C) 2015 Linus Walleij | 
|  | */ | 
|  | #include <linux/of.h> | 
|  | #include <linux/regmap.h> | 
|  | #include <linux/mfd/syscon.h> | 
|  | #include <linux/bitops.h> | 
|  | #include <linux/irqchip.h> | 
|  | #include <linux/irqchip/arm-gic.h> | 
|  |  | 
|  | #define REALVIEW_SYS_LOCK_OFFSET	0x20 | 
|  | #define REALVIEW_SYS_PLD_CTRL1		0x74 | 
|  | #define REALVIEW_EB_REVB_SYS_PLD_CTRL1	0xD8 | 
|  | #define VERSATILE_LOCK_VAL		0xA05F | 
|  | #define PLD_INTMODE_MASK		BIT(22)|BIT(23)|BIT(24) | 
|  | #define PLD_INTMODE_LEGACY		0x0 | 
|  | #define PLD_INTMODE_NEW_DCC		BIT(22) | 
|  | #define PLD_INTMODE_NEW_NO_DCC		BIT(23) | 
|  | #define PLD_INTMODE_FIQ_ENABLE		BIT(24) | 
|  |  | 
|  | /* For some reason RealView EB Rev B moved this register */ | 
|  | static const struct of_device_id syscon_pldset_of_match[] = { | 
|  | { | 
|  | .compatible = "arm,realview-eb11mp-revb-syscon", | 
|  | .data = (void *)REALVIEW_EB_REVB_SYS_PLD_CTRL1, | 
|  | }, | 
|  | { | 
|  | .compatible = "arm,realview-eb11mp-revc-syscon", | 
|  | .data = (void *)REALVIEW_SYS_PLD_CTRL1, | 
|  | }, | 
|  | { | 
|  | .compatible = "arm,realview-eb-syscon", | 
|  | .data = (void *)REALVIEW_SYS_PLD_CTRL1, | 
|  | }, | 
|  | { | 
|  | .compatible = "arm,realview-pb11mp-syscon", | 
|  | .data = (void *)REALVIEW_SYS_PLD_CTRL1, | 
|  | }, | 
|  | {}, | 
|  | }; | 
|  |  | 
|  | static int __init | 
|  | realview_gic_of_init(struct device_node *node, struct device_node *parent) | 
|  | { | 
|  | struct regmap *map; | 
|  | struct device_node *np; | 
|  | const struct of_device_id *gic_id; | 
|  | u32 pld1_ctrl; | 
|  |  | 
|  | np = of_find_matching_node_and_match(NULL, syscon_pldset_of_match, | 
|  | &gic_id); | 
|  | if (!np) | 
|  | return -ENODEV; | 
|  | pld1_ctrl = (u32)gic_id->data; | 
|  |  | 
|  | /* The PB11MPCore GIC needs to be configured in the syscon */ | 
|  | map = syscon_node_to_regmap(np); | 
|  | if (!IS_ERR(map)) { | 
|  | /* new irq mode with no DCC */ | 
|  | regmap_write(map, REALVIEW_SYS_LOCK_OFFSET, | 
|  | VERSATILE_LOCK_VAL); | 
|  | regmap_update_bits(map, pld1_ctrl, | 
|  | PLD_INTMODE_NEW_NO_DCC, | 
|  | PLD_INTMODE_MASK); | 
|  | regmap_write(map, REALVIEW_SYS_LOCK_OFFSET, 0x0000); | 
|  | pr_info("RealView GIC: set up interrupt controller to NEW mode, no DCC\n"); | 
|  | } else { | 
|  | pr_err("RealView GIC setup: could not find syscon\n"); | 
|  | return -ENODEV; | 
|  | } | 
|  | return gic_of_init(node, parent); | 
|  | } | 
|  | IRQCHIP_DECLARE(armtc11mp_gic, "arm,tc11mp-gic", realview_gic_of_init); | 
|  | IRQCHIP_DECLARE(armeb11mp_gic, "arm,eb11mp-gic", realview_gic_of_init); |