|  | // SPDX-License-Identifier: GPL-2.0-only | 
|  | /* | 
|  | * LP5521/LP5523/LP55231/LP5562 Common Driver | 
|  | * | 
|  | * Copyright 2012 Texas Instruments | 
|  | * | 
|  | * Author: Milo(Woogyom) Kim <milo.kim@ti.com> | 
|  | * | 
|  | * Derived from leds-lp5521.c, leds-lp5523.c | 
|  | */ | 
|  |  | 
|  | #include <linux/clk.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/firmware.h> | 
|  | #include <linux/i2c.h> | 
|  | #include <linux/leds.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/platform_data/leds-lp55xx.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/gpio/consumer.h> | 
|  |  | 
|  | #include "leds-lp55xx-common.h" | 
|  |  | 
|  | /* External clock rate */ | 
|  | #define LP55XX_CLK_32K			32768 | 
|  |  | 
|  | static struct lp55xx_led *cdev_to_lp55xx_led(struct led_classdev *cdev) | 
|  | { | 
|  | return container_of(cdev, struct lp55xx_led, cdev); | 
|  | } | 
|  |  | 
|  | static struct lp55xx_led *dev_to_lp55xx_led(struct device *dev) | 
|  | { | 
|  | return cdev_to_lp55xx_led(dev_get_drvdata(dev)); | 
|  | } | 
|  |  | 
|  | static struct lp55xx_led *mcled_cdev_to_led(struct led_classdev_mc *mc_cdev) | 
|  | { | 
|  | return container_of(mc_cdev, struct lp55xx_led, mc_cdev); | 
|  | } | 
|  |  | 
|  | static void lp55xx_reset_device(struct lp55xx_chip *chip) | 
|  | { | 
|  | struct lp55xx_device_config *cfg = chip->cfg; | 
|  | u8 addr = cfg->reset.addr; | 
|  | u8 val  = cfg->reset.val; | 
|  |  | 
|  | /* no error checking here because no ACK from the device after reset */ | 
|  | lp55xx_write(chip, addr, val); | 
|  | } | 
|  |  | 
|  | static int lp55xx_detect_device(struct lp55xx_chip *chip) | 
|  | { | 
|  | struct lp55xx_device_config *cfg = chip->cfg; | 
|  | u8 addr = cfg->enable.addr; | 
|  | u8 val  = cfg->enable.val; | 
|  | int ret; | 
|  |  | 
|  | ret = lp55xx_write(chip, addr, val); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | usleep_range(1000, 2000); | 
|  |  | 
|  | ret = lp55xx_read(chip, addr, &val); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | if (val != cfg->enable.val) | 
|  | return -ENODEV; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int lp55xx_post_init_device(struct lp55xx_chip *chip) | 
|  | { | 
|  | struct lp55xx_device_config *cfg = chip->cfg; | 
|  |  | 
|  | if (!cfg->post_init_device) | 
|  | return 0; | 
|  |  | 
|  | return cfg->post_init_device(chip); | 
|  | } | 
|  |  | 
|  | static ssize_t led_current_show(struct device *dev, | 
|  | struct device_attribute *attr, | 
|  | char *buf) | 
|  | { | 
|  | struct lp55xx_led *led = dev_to_lp55xx_led(dev); | 
|  |  | 
|  | return scnprintf(buf, PAGE_SIZE, "%d\n", led->led_current); | 
|  | } | 
|  |  | 
|  | static ssize_t led_current_store(struct device *dev, | 
|  | struct device_attribute *attr, | 
|  | const char *buf, size_t len) | 
|  | { | 
|  | struct lp55xx_led *led = dev_to_lp55xx_led(dev); | 
|  | struct lp55xx_chip *chip = led->chip; | 
|  | unsigned long curr; | 
|  |  | 
|  | if (kstrtoul(buf, 0, &curr)) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (curr > led->max_current) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (!chip->cfg->set_led_current) | 
|  | return len; | 
|  |  | 
|  | mutex_lock(&chip->lock); | 
|  | chip->cfg->set_led_current(led, (u8)curr); | 
|  | mutex_unlock(&chip->lock); | 
|  |  | 
|  | return len; | 
|  | } | 
|  |  | 
|  | static ssize_t max_current_show(struct device *dev, | 
|  | struct device_attribute *attr, | 
|  | char *buf) | 
|  | { | 
|  | struct lp55xx_led *led = dev_to_lp55xx_led(dev); | 
|  |  | 
|  | return scnprintf(buf, PAGE_SIZE, "%d\n", led->max_current); | 
|  | } | 
|  |  | 
|  | static DEVICE_ATTR_RW(led_current); | 
|  | static DEVICE_ATTR_RO(max_current); | 
|  |  | 
|  | static struct attribute *lp55xx_led_attrs[] = { | 
|  | &dev_attr_led_current.attr, | 
|  | &dev_attr_max_current.attr, | 
|  | NULL, | 
|  | }; | 
|  | ATTRIBUTE_GROUPS(lp55xx_led); | 
|  |  | 
|  | static int lp55xx_set_mc_brightness(struct led_classdev *cdev, | 
|  | enum led_brightness brightness) | 
|  | { | 
|  | struct led_classdev_mc *mc_dev = lcdev_to_mccdev(cdev); | 
|  | struct lp55xx_led *led = mcled_cdev_to_led(mc_dev); | 
|  | struct lp55xx_device_config *cfg = led->chip->cfg; | 
|  |  | 
|  | led_mc_calc_color_components(&led->mc_cdev, brightness); | 
|  | return cfg->multicolor_brightness_fn(led); | 
|  |  | 
|  | } | 
|  |  | 
|  | static int lp55xx_set_brightness(struct led_classdev *cdev, | 
|  | enum led_brightness brightness) | 
|  | { | 
|  | struct lp55xx_led *led = cdev_to_lp55xx_led(cdev); | 
|  | struct lp55xx_device_config *cfg = led->chip->cfg; | 
|  |  | 
|  | led->brightness = (u8)brightness; | 
|  | return cfg->brightness_fn(led); | 
|  | } | 
|  |  | 
|  | static int lp55xx_init_led(struct lp55xx_led *led, | 
|  | struct lp55xx_chip *chip, int chan) | 
|  | { | 
|  | struct lp55xx_platform_data *pdata = chip->pdata; | 
|  | struct lp55xx_device_config *cfg = chip->cfg; | 
|  | struct device *dev = &chip->cl->dev; | 
|  | int max_channel = cfg->max_channel; | 
|  | struct mc_subled *mc_led_info; | 
|  | struct led_classdev *led_cdev; | 
|  | char name[32]; | 
|  | int i, j = 0; | 
|  | int ret; | 
|  |  | 
|  | if (chan >= max_channel) { | 
|  | dev_err(dev, "invalid channel: %d / %d\n", chan, max_channel); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (pdata->led_config[chan].led_current == 0) | 
|  | return 0; | 
|  |  | 
|  | if (pdata->led_config[chan].name) { | 
|  | led->cdev.name = pdata->led_config[chan].name; | 
|  | } else { | 
|  | snprintf(name, sizeof(name), "%s:channel%d", | 
|  | pdata->label ? : chip->cl->name, chan); | 
|  | led->cdev.name = name; | 
|  | } | 
|  |  | 
|  | if (pdata->led_config[chan].num_colors > 1) { | 
|  | mc_led_info = devm_kcalloc(dev, | 
|  | pdata->led_config[chan].num_colors, | 
|  | sizeof(*mc_led_info), GFP_KERNEL); | 
|  | if (!mc_led_info) | 
|  | return -ENOMEM; | 
|  |  | 
|  | led_cdev = &led->mc_cdev.led_cdev; | 
|  | led_cdev->name = led->cdev.name; | 
|  | led_cdev->brightness_set_blocking = lp55xx_set_mc_brightness; | 
|  | led->mc_cdev.num_colors = pdata->led_config[chan].num_colors; | 
|  | for (i = 0; i < led->mc_cdev.num_colors; i++) { | 
|  | mc_led_info[i].color_index = | 
|  | pdata->led_config[chan].color_id[i]; | 
|  | mc_led_info[i].channel = | 
|  | pdata->led_config[chan].output_num[i]; | 
|  | j++; | 
|  | } | 
|  |  | 
|  | led->mc_cdev.subled_info = mc_led_info; | 
|  | } else { | 
|  | led->cdev.brightness_set_blocking = lp55xx_set_brightness; | 
|  | } | 
|  |  | 
|  | led->cdev.groups = lp55xx_led_groups; | 
|  | led->cdev.default_trigger = pdata->led_config[chan].default_trigger; | 
|  | led->led_current = pdata->led_config[chan].led_current; | 
|  | led->max_current = pdata->led_config[chan].max_current; | 
|  | led->chan_nr = pdata->led_config[chan].chan_nr; | 
|  |  | 
|  | if (led->chan_nr >= max_channel) { | 
|  | dev_err(dev, "Use channel numbers between 0 and %d\n", | 
|  | max_channel - 1); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (pdata->led_config[chan].num_colors > 1) | 
|  | ret = devm_led_classdev_multicolor_register(dev, &led->mc_cdev); | 
|  | else | 
|  | ret = devm_led_classdev_register(dev, &led->cdev); | 
|  |  | 
|  | if (ret) { | 
|  | dev_err(dev, "led register err: %d\n", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void lp55xx_firmware_loaded(const struct firmware *fw, void *context) | 
|  | { | 
|  | struct lp55xx_chip *chip = context; | 
|  | struct device *dev = &chip->cl->dev; | 
|  | enum lp55xx_engine_index idx = chip->engine_idx; | 
|  |  | 
|  | if (!fw) { | 
|  | dev_err(dev, "firmware request failed\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* handling firmware data is chip dependent */ | 
|  | mutex_lock(&chip->lock); | 
|  |  | 
|  | chip->engines[idx - 1].mode = LP55XX_ENGINE_LOAD; | 
|  | chip->fw = fw; | 
|  | if (chip->cfg->firmware_cb) | 
|  | chip->cfg->firmware_cb(chip); | 
|  |  | 
|  | mutex_unlock(&chip->lock); | 
|  |  | 
|  | /* firmware should be released for other channel use */ | 
|  | release_firmware(chip->fw); | 
|  | chip->fw = NULL; | 
|  | } | 
|  |  | 
|  | static int lp55xx_request_firmware(struct lp55xx_chip *chip) | 
|  | { | 
|  | const char *name = chip->cl->name; | 
|  | struct device *dev = &chip->cl->dev; | 
|  |  | 
|  | return request_firmware_nowait(THIS_MODULE, false, name, dev, | 
|  | GFP_KERNEL, chip, lp55xx_firmware_loaded); | 
|  | } | 
|  |  | 
|  | static ssize_t select_engine_show(struct device *dev, | 
|  | struct device_attribute *attr, | 
|  | char *buf) | 
|  | { | 
|  | struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev)); | 
|  | struct lp55xx_chip *chip = led->chip; | 
|  |  | 
|  | return sprintf(buf, "%d\n", chip->engine_idx); | 
|  | } | 
|  |  | 
|  | static ssize_t select_engine_store(struct device *dev, | 
|  | struct device_attribute *attr, | 
|  | const char *buf, size_t len) | 
|  | { | 
|  | struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev)); | 
|  | struct lp55xx_chip *chip = led->chip; | 
|  | unsigned long val; | 
|  | int ret; | 
|  |  | 
|  | if (kstrtoul(buf, 0, &val)) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* select the engine to be run */ | 
|  |  | 
|  | switch (val) { | 
|  | case LP55XX_ENGINE_1: | 
|  | case LP55XX_ENGINE_2: | 
|  | case LP55XX_ENGINE_3: | 
|  | mutex_lock(&chip->lock); | 
|  | chip->engine_idx = val; | 
|  | ret = lp55xx_request_firmware(chip); | 
|  | mutex_unlock(&chip->lock); | 
|  | break; | 
|  | default: | 
|  | dev_err(dev, "%lu: invalid engine index. (1, 2, 3)\n", val); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (ret) { | 
|  | dev_err(dev, "request firmware err: %d\n", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | return len; | 
|  | } | 
|  |  | 
|  | static inline void lp55xx_run_engine(struct lp55xx_chip *chip, bool start) | 
|  | { | 
|  | if (chip->cfg->run_engine) | 
|  | chip->cfg->run_engine(chip, start); | 
|  | } | 
|  |  | 
|  | static ssize_t run_engine_store(struct device *dev, | 
|  | struct device_attribute *attr, | 
|  | const char *buf, size_t len) | 
|  | { | 
|  | struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev)); | 
|  | struct lp55xx_chip *chip = led->chip; | 
|  | unsigned long val; | 
|  |  | 
|  | if (kstrtoul(buf, 0, &val)) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* run or stop the selected engine */ | 
|  |  | 
|  | if (val <= 0) { | 
|  | lp55xx_run_engine(chip, false); | 
|  | return len; | 
|  | } | 
|  |  | 
|  | mutex_lock(&chip->lock); | 
|  | lp55xx_run_engine(chip, true); | 
|  | mutex_unlock(&chip->lock); | 
|  |  | 
|  | return len; | 
|  | } | 
|  |  | 
|  | static DEVICE_ATTR_RW(select_engine); | 
|  | static DEVICE_ATTR_WO(run_engine); | 
|  |  | 
|  | static struct attribute *lp55xx_engine_attributes[] = { | 
|  | &dev_attr_select_engine.attr, | 
|  | &dev_attr_run_engine.attr, | 
|  | NULL, | 
|  | }; | 
|  |  | 
|  | static const struct attribute_group lp55xx_engine_attr_group = { | 
|  | .attrs = lp55xx_engine_attributes, | 
|  | }; | 
|  |  | 
|  | int lp55xx_write(struct lp55xx_chip *chip, u8 reg, u8 val) | 
|  | { | 
|  | return i2c_smbus_write_byte_data(chip->cl, reg, val); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(lp55xx_write); | 
|  |  | 
|  | int lp55xx_read(struct lp55xx_chip *chip, u8 reg, u8 *val) | 
|  | { | 
|  | s32 ret; | 
|  |  | 
|  | ret = i2c_smbus_read_byte_data(chip->cl, reg); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | *val = ret; | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(lp55xx_read); | 
|  |  | 
|  | int lp55xx_update_bits(struct lp55xx_chip *chip, u8 reg, u8 mask, u8 val) | 
|  | { | 
|  | int ret; | 
|  | u8 tmp; | 
|  |  | 
|  | ret = lp55xx_read(chip, reg, &tmp); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | tmp &= ~mask; | 
|  | tmp |= val & mask; | 
|  |  | 
|  | return lp55xx_write(chip, reg, tmp); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(lp55xx_update_bits); | 
|  |  | 
|  | bool lp55xx_is_extclk_used(struct lp55xx_chip *chip) | 
|  | { | 
|  | struct clk *clk; | 
|  | int err; | 
|  |  | 
|  | clk = devm_clk_get(&chip->cl->dev, "32k_clk"); | 
|  | if (IS_ERR(clk)) | 
|  | goto use_internal_clk; | 
|  |  | 
|  | err = clk_prepare_enable(clk); | 
|  | if (err) | 
|  | goto use_internal_clk; | 
|  |  | 
|  | if (clk_get_rate(clk) != LP55XX_CLK_32K) { | 
|  | clk_disable_unprepare(clk); | 
|  | goto use_internal_clk; | 
|  | } | 
|  |  | 
|  | dev_info(&chip->cl->dev, "%dHz external clock used\n",	LP55XX_CLK_32K); | 
|  |  | 
|  | chip->clk = clk; | 
|  | return true; | 
|  |  | 
|  | use_internal_clk: | 
|  | dev_info(&chip->cl->dev, "internal clock used\n"); | 
|  | return false; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(lp55xx_is_extclk_used); | 
|  |  | 
|  | int lp55xx_init_device(struct lp55xx_chip *chip) | 
|  | { | 
|  | struct lp55xx_platform_data *pdata; | 
|  | struct lp55xx_device_config *cfg; | 
|  | struct device *dev = &chip->cl->dev; | 
|  | int ret = 0; | 
|  |  | 
|  | WARN_ON(!chip); | 
|  |  | 
|  | pdata = chip->pdata; | 
|  | cfg = chip->cfg; | 
|  |  | 
|  | if (!pdata || !cfg) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (pdata->enable_gpiod) { | 
|  | gpiod_direction_output(pdata->enable_gpiod, 0); | 
|  |  | 
|  | gpiod_set_consumer_name(pdata->enable_gpiod, "LP55xx enable"); | 
|  | gpiod_set_value(pdata->enable_gpiod, 0); | 
|  | usleep_range(1000, 2000); /* Keep enable down at least 1ms */ | 
|  | gpiod_set_value(pdata->enable_gpiod, 1); | 
|  | usleep_range(1000, 2000); /* 500us abs min. */ | 
|  | } | 
|  |  | 
|  | lp55xx_reset_device(chip); | 
|  |  | 
|  | /* | 
|  | * Exact value is not available. 10 - 20ms | 
|  | * appears to be enough for reset. | 
|  | */ | 
|  | usleep_range(10000, 20000); | 
|  |  | 
|  | ret = lp55xx_detect_device(chip); | 
|  | if (ret) { | 
|  | dev_err(dev, "device detection err: %d\n", ret); | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | /* chip specific initialization */ | 
|  | ret = lp55xx_post_init_device(chip); | 
|  | if (ret) { | 
|  | dev_err(dev, "post init device err: %d\n", ret); | 
|  | goto err_post_init; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_post_init: | 
|  | lp55xx_deinit_device(chip); | 
|  | err: | 
|  | return ret; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(lp55xx_init_device); | 
|  |  | 
|  | void lp55xx_deinit_device(struct lp55xx_chip *chip) | 
|  | { | 
|  | struct lp55xx_platform_data *pdata = chip->pdata; | 
|  |  | 
|  | if (chip->clk) | 
|  | clk_disable_unprepare(chip->clk); | 
|  |  | 
|  | if (pdata->enable_gpiod) | 
|  | gpiod_set_value(pdata->enable_gpiod, 0); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(lp55xx_deinit_device); | 
|  |  | 
|  | int lp55xx_register_leds(struct lp55xx_led *led, struct lp55xx_chip *chip) | 
|  | { | 
|  | struct lp55xx_platform_data *pdata = chip->pdata; | 
|  | struct lp55xx_device_config *cfg = chip->cfg; | 
|  | int num_channels = pdata->num_channels; | 
|  | struct lp55xx_led *each; | 
|  | u8 led_current; | 
|  | int ret; | 
|  | int i; | 
|  |  | 
|  | if (!cfg->brightness_fn) { | 
|  | dev_err(&chip->cl->dev, "empty brightness configuration\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < num_channels; i++) { | 
|  |  | 
|  | /* do not initialize channels that are not connected */ | 
|  | if (pdata->led_config[i].led_current == 0) | 
|  | continue; | 
|  |  | 
|  | led_current = pdata->led_config[i].led_current; | 
|  | each = led + i; | 
|  | ret = lp55xx_init_led(each, chip, i); | 
|  | if (ret) | 
|  | goto err_init_led; | 
|  |  | 
|  | chip->num_leds++; | 
|  | each->chip = chip; | 
|  |  | 
|  | /* setting led current at each channel */ | 
|  | if (cfg->set_led_current) | 
|  | cfg->set_led_current(each, led_current); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_init_led: | 
|  | return ret; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(lp55xx_register_leds); | 
|  |  | 
|  | int lp55xx_register_sysfs(struct lp55xx_chip *chip) | 
|  | { | 
|  | struct device *dev = &chip->cl->dev; | 
|  | struct lp55xx_device_config *cfg = chip->cfg; | 
|  | int ret; | 
|  |  | 
|  | if (!cfg->run_engine || !cfg->firmware_cb) | 
|  | goto dev_specific_attrs; | 
|  |  | 
|  | ret = sysfs_create_group(&dev->kobj, &lp55xx_engine_attr_group); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | dev_specific_attrs: | 
|  | return cfg->dev_attr_group ? | 
|  | sysfs_create_group(&dev->kobj, cfg->dev_attr_group) : 0; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(lp55xx_register_sysfs); | 
|  |  | 
|  | void lp55xx_unregister_sysfs(struct lp55xx_chip *chip) | 
|  | { | 
|  | struct device *dev = &chip->cl->dev; | 
|  | struct lp55xx_device_config *cfg = chip->cfg; | 
|  |  | 
|  | if (cfg->dev_attr_group) | 
|  | sysfs_remove_group(&dev->kobj, cfg->dev_attr_group); | 
|  |  | 
|  | sysfs_remove_group(&dev->kobj, &lp55xx_engine_attr_group); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(lp55xx_unregister_sysfs); | 
|  |  | 
|  | static int lp55xx_parse_common_child(struct device_node *np, | 
|  | struct lp55xx_led_config *cfg, | 
|  | int led_number, int *chan_nr) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | of_property_read_string(np, "chan-name", | 
|  | &cfg[led_number].name); | 
|  | of_property_read_u8(np, "led-cur", | 
|  | &cfg[led_number].led_current); | 
|  | of_property_read_u8(np, "max-cur", | 
|  | &cfg[led_number].max_current); | 
|  |  | 
|  | ret = of_property_read_u32(np, "reg", chan_nr); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | if (*chan_nr < 0 || *chan_nr > cfg->max_channel) | 
|  | return -EINVAL; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int lp55xx_parse_multi_led_child(struct device_node *child, | 
|  | struct lp55xx_led_config *cfg, | 
|  | int child_number, int color_number) | 
|  | { | 
|  | int chan_nr, color_id, ret; | 
|  |  | 
|  | ret = lp55xx_parse_common_child(child, cfg, child_number, &chan_nr); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | ret = of_property_read_u32(child, "color", &color_id); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | cfg[child_number].color_id[color_number] = color_id; | 
|  | cfg[child_number].output_num[color_number] = chan_nr; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int lp55xx_parse_multi_led(struct device_node *np, | 
|  | struct lp55xx_led_config *cfg, | 
|  | int child_number) | 
|  | { | 
|  | struct device_node *child; | 
|  | int num_colors = 0, ret; | 
|  |  | 
|  | for_each_available_child_of_node(np, child) { | 
|  | ret = lp55xx_parse_multi_led_child(child, cfg, child_number, | 
|  | num_colors); | 
|  | if (ret) { | 
|  | of_node_put(child); | 
|  | return ret; | 
|  | } | 
|  | num_colors++; | 
|  | } | 
|  |  | 
|  | cfg[child_number].num_colors = num_colors; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int lp55xx_parse_logical_led(struct device_node *np, | 
|  | struct lp55xx_led_config *cfg, | 
|  | int child_number) | 
|  | { | 
|  | int led_color, ret; | 
|  | int chan_nr = 0; | 
|  |  | 
|  | cfg[child_number].default_trigger = | 
|  | of_get_property(np, "linux,default-trigger", NULL); | 
|  |  | 
|  | ret = of_property_read_u32(np, "color", &led_color); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | if (led_color == LED_COLOR_ID_RGB) | 
|  | return lp55xx_parse_multi_led(np, cfg, child_number); | 
|  |  | 
|  | ret =  lp55xx_parse_common_child(np, cfg, child_number, &chan_nr); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | cfg[child_number].chan_nr = chan_nr; | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | struct lp55xx_platform_data *lp55xx_of_populate_pdata(struct device *dev, | 
|  | struct device_node *np, | 
|  | struct lp55xx_chip *chip) | 
|  | { | 
|  | struct device_node *child; | 
|  | struct lp55xx_platform_data *pdata; | 
|  | struct lp55xx_led_config *cfg; | 
|  | int num_channels; | 
|  | int i = 0; | 
|  | int ret; | 
|  |  | 
|  | pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); | 
|  | if (!pdata) | 
|  | return ERR_PTR(-ENOMEM); | 
|  |  | 
|  | num_channels = of_get_available_child_count(np); | 
|  | if (num_channels == 0) { | 
|  | dev_err(dev, "no LED channels\n"); | 
|  | return ERR_PTR(-EINVAL); | 
|  | } | 
|  |  | 
|  | cfg = devm_kcalloc(dev, num_channels, sizeof(*cfg), GFP_KERNEL); | 
|  | if (!cfg) | 
|  | return ERR_PTR(-ENOMEM); | 
|  |  | 
|  | pdata->led_config = &cfg[0]; | 
|  | pdata->num_channels = num_channels; | 
|  | cfg->max_channel = chip->cfg->max_channel; | 
|  |  | 
|  | for_each_available_child_of_node(np, child) { | 
|  | ret = lp55xx_parse_logical_led(child, cfg, i); | 
|  | if (ret) { | 
|  | of_node_put(child); | 
|  | return ERR_PTR(-EINVAL); | 
|  | } | 
|  | i++; | 
|  | } | 
|  |  | 
|  | of_property_read_string(np, "label", &pdata->label); | 
|  | of_property_read_u8(np, "clock-mode", &pdata->clock_mode); | 
|  |  | 
|  | pdata->enable_gpiod = devm_gpiod_get_optional(dev, "enable", | 
|  | GPIOD_ASIS); | 
|  | if (IS_ERR(pdata->enable_gpiod)) | 
|  | return ERR_CAST(pdata->enable_gpiod); | 
|  |  | 
|  | /* LP8501 specific */ | 
|  | of_property_read_u8(np, "pwr-sel", (u8 *)&pdata->pwr_sel); | 
|  |  | 
|  | return pdata; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(lp55xx_of_populate_pdata); | 
|  |  | 
|  | MODULE_AUTHOR("Milo Kim <milo.kim@ti.com>"); | 
|  | MODULE_DESCRIPTION("LP55xx Common Driver"); | 
|  | MODULE_LICENSE("GPL"); |