| 3f6e6c3291ed ("ath11k: disable monitor mode on QCA6390") |
| 2626c269702e ("ath11k: add interface_modes to hw_params") |
| 5cca5fa1c164 ("ath11k: Add support spectral scan for IPQ6018") |
| b129699a0c7b ("ath11k: add ipq6018 support") |
| 967c1d1131fa ("ath11k: move target ce configs to hw_params") |
| 065f5f683ea6 ("ath11k: use TCL_DATA_RING_0 for QCA6390") |
| a6275302c370 ("ath11k: assign correct search flag and type for QCA6390") |
| e7495035286a ("ath11k: delay vdev_start for QCA6390") |
| 4152e4206cc5 ("ath11k: setup QCA6390 rings for both rxdmas") |
| 7f6fc1ebf5b1 ("ath11k: don't initialize rxdma1 related ring") |
| d4ecb90b3857 ("ath11k: enable DP interrupt setup for QCA6390") |
| 13ecd81fbad6 ("ath11k: dp: redefine peer_map and peer_unmap") |
| ed0192f7942e ("ath11k: wmi: put hardware to DBS mode") |
| 2d4bcbed5b7d ("ath11k: initialize wmi config based on hw_params") |
| 5f859bc02c7b ("ath11k: force single pdev only for QCA6390") |
| e3396b8bddd2 ("ath11k: ce: support different CE configurations") |
| 6976433c4778 ("ath11k: hal: create register values dynamically") |
| 727fae1478a5 ("ath11k: enable internal sleep clock") |
| 2c3960c2253d ("ath11k: setup ce tasklet for control path") |
| c4eacabee224 ("ath11k: configure copy engine msi address in CE srng") |
| eb8de0490e1f ("ath11k: fill appropriate QMI service instance id for QCA6390") |
| 569704544778 ("ath11k: add support for m3 firmware") |
| 1ff8ed786d5d ("ath11k: use remoteproc only with AHB devices") |
| 7f4beda2ba03 ("ath11k: pci: add HAL, CE and core initialisation") |
| 1399fb87ea3e ("ath11k: register MHI controller device for QCA6390") |
| b8246f884684 ("ath11k: implement ath11k_core_pre_init()") |
| 5697a564d369 ("ath11k: pci: add MSI config initialisation") |
| 5762613ededb ("ath11k: pci: setup resources") |
| 6e0355afaeb2 ("ath11k: add simple PCI client driver for QCA6390 chipset") |
| 34d5a3a88436 ("ath11k: move ring mask definitions to hw_params") |
| 9de2ad43d46c ("ath11k: add hw_params entry for QCA6390") |
| 34d9fc80bac3 ("ath11k: don't use defines for hw specific firmware directories") |
| 7b57b2ddec21 ("ath11k: create a common function to request all firmware files") |
| d547ca4c8cc5 ("ath11k: add hw_ops for pdev id to hw_mac mapping") |
| b1cc29e97d1b ("ath11k: define max_radios in hw_params") |
| d3318abf41cf ("ath11k: convert ath11k_hw_params to an array") |
| 7309f7730532 ("ath11k: update firmware files read path") |
| 01e34233c645 ("ath11k: fix wmi peer flags in peer assoc command") |
| 9d11b7bff950 ("ath11k: add support for spectral scan") |
| bd6478559e27 ("ath11k: Add direct buffer ring support") |
| 22eeadcdeab6 ("ath11k: add support for 6GHz radio in driver") |
| 630ad41c195c ("ath11k: Add drv private for bus opaque struct") |
| 31858805f91a ("ath11k: Add support for multibus support") |
| 559ef68f5f69 ("ath11k: Add support to reset htt peer stats") |
| d687275b268b ("ath11k: Add dynamic tcl ring selection logic with retry mechanism") |
| ec48d28ba291 ("ath11k: Fix rx_filter flags setting for per peer rx_stats") |
| 21c1b063f4b9 ("ath11k: add pktlog checksum in trace events to support pktlog") |
| 9556dfa28b4d ("ath11k: Add sta debugfs support to configure ADDBA and DELBA") |
| acc79d981c14 ("ath11k: Perform per-msdu rx processing") |
| 26c79927f123 ("ath11k: Configure hash based reo destination ring selection") |