| What: /sys/module/pch_phub/drivers/.../pch_mac | |
| Date: August 2010 | |
| KernelVersion: 2.6.35 | |
| Contact: masa-korg@dsn.okisemi.com | |
| Description: Write/read GbE MAC address. | |
| What: /sys/module/pch_phub/drivers/.../pch_firmware | |
| Date: August 2010 | |
| KernelVersion: 2.6.35 | |
| Contact: masa-korg@dsn.okisemi.com | |
| Description: Write/read Option ROM data. | |
| What: /sys/module/ehci_hcd/drivers/.../uframe_periodic_max | |
| Date: July 2011 | |
| KernelVersion: 3.1 | |
| Contact: Kirill Smelkov <kirr@mns.spb.ru> | |
| Description: Maximum time allowed for periodic transfers per microframe (μs) | |
| [ USB 2.0 sets maximum allowed time for periodic transfers per | |
| microframe to be 80%, that is 100 microseconds out of 125 | |
| microseconds (full microframe). | |
| However there are cases, when 80% max isochronous bandwidth is | |
| too limiting. For example two video streams could require 110 | |
| microseconds of isochronous bandwidth per microframe to work | |
| together. ] | |
| Through this setting it is possible to raise the limit so that | |
| the host controller would allow allocating more than 100 | |
| microseconds of periodic bandwidth per microframe. | |
| Beware, non-standard modes are usually not thoroughly tested by | |
| hardware designers, and the hardware can malfunction when this | |
| setting differ from default 100. | |
| What: /sys/module/*/{coresize,initsize} | |
| Date: Jan 2012 | |
| KernelVersion:»·3.3 | |
| Contact: Kay Sievers <kay.sievers@vrfy.org> | |
| Description: Module size in bytes. | |
| What: /sys/module/*/taint | |
| Date: Jan 2012 | |
| KernelVersion:»·3.3 | |
| Contact: Kay Sievers <kay.sievers@vrfy.org> | |
| Description: Module taint flags: | |
| P - proprietary module | |
| O - out-of-tree module | |
| F - force-loaded module | |
| C - staging driver module | |
| E - unsigned module |