|  | /* ehci-msm.c - HSUSB Host Controller Driver Implementation | 
|  | * | 
|  | * Copyright (c) 2008-2011, Code Aurora Forum. All rights reserved. | 
|  | * | 
|  | * Partly derived from ehci-fsl.c and ehci-hcd.c | 
|  | * Copyright (c) 2000-2004 by David Brownell | 
|  | * Copyright (c) 2005 MontaVista Software | 
|  | * | 
|  | * All source code in this file is licensed under the following license except | 
|  | * where indicated. | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify it | 
|  | * under the terms of the GNU General Public License version 2 as published | 
|  | * by the Free Software Foundation. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. | 
|  | * | 
|  | * See the GNU General Public License for more details. | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, you can find it at http://www.fsf.org | 
|  | */ | 
|  |  | 
|  | #include <linux/clk.h> | 
|  | #include <linux/err.h> | 
|  | #include <linux/io.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/pm_runtime.h> | 
|  | #include <linux/usb/otg.h> | 
|  | #include <linux/usb/msm_hsusb_hw.h> | 
|  | #include <linux/usb.h> | 
|  | #include <linux/usb/hcd.h> | 
|  |  | 
|  | #include "ehci.h" | 
|  |  | 
|  | #define MSM_USB_BASE (hcd->regs) | 
|  |  | 
|  | #define DRIVER_DESC "Qualcomm On-Chip EHCI Host Controller" | 
|  |  | 
|  | static const char hcd_name[] = "ehci-msm"; | 
|  | static struct hc_driver __read_mostly msm_hc_driver; | 
|  |  | 
|  | static int ehci_msm_reset(struct usb_hcd *hcd) | 
|  | { | 
|  | struct ehci_hcd *ehci = hcd_to_ehci(hcd); | 
|  | int retval; | 
|  |  | 
|  | ehci->caps = USB_CAPLENGTH; | 
|  | hcd->has_tt = 1; | 
|  |  | 
|  | retval = ehci_setup(hcd); | 
|  | if (retval) | 
|  | return retval; | 
|  |  | 
|  | /* bursts of unspecified length. */ | 
|  | writel(0, USB_AHBBURST); | 
|  | /* Use the AHB transactor */ | 
|  | writel(0, USB_AHBMODE); | 
|  | /* Disable streaming mode and select host mode */ | 
|  | writel(0x13, USB_USBMODE); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ehci_msm_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct usb_hcd *hcd; | 
|  | struct resource *res; | 
|  | struct usb_phy *phy; | 
|  | int ret; | 
|  |  | 
|  | dev_dbg(&pdev->dev, "ehci_msm proble\n"); | 
|  |  | 
|  | hcd = usb_create_hcd(&msm_hc_driver, &pdev->dev, dev_name(&pdev->dev)); | 
|  | if (!hcd) { | 
|  | dev_err(&pdev->dev, "Unable to create HCD\n"); | 
|  | return  -ENOMEM; | 
|  | } | 
|  |  | 
|  | ret = platform_get_irq(pdev, 0); | 
|  | if (ret < 0) { | 
|  | dev_err(&pdev->dev, "Unable to get IRQ resource\n"); | 
|  | goto put_hcd; | 
|  | } | 
|  | hcd->irq = ret; | 
|  |  | 
|  | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
|  | if (!res) { | 
|  | dev_err(&pdev->dev, "Unable to get memory resource\n"); | 
|  | ret = -ENODEV; | 
|  | goto put_hcd; | 
|  | } | 
|  |  | 
|  | hcd->rsrc_start = res->start; | 
|  | hcd->rsrc_len = resource_size(res); | 
|  | hcd->regs = devm_ioremap(&pdev->dev, hcd->rsrc_start, hcd->rsrc_len); | 
|  | if (!hcd->regs) { | 
|  | dev_err(&pdev->dev, "ioremap failed\n"); | 
|  | ret = -ENOMEM; | 
|  | goto put_hcd; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * OTG driver takes care of PHY initialization, clock management, | 
|  | * powering up VBUS, mapping of registers address space and power | 
|  | * management. | 
|  | */ | 
|  | if (pdev->dev.of_node) | 
|  | phy = devm_usb_get_phy_by_phandle(&pdev->dev, "usb-phy", 0); | 
|  | else | 
|  | phy = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2); | 
|  |  | 
|  | if (IS_ERR(phy)) { | 
|  | dev_err(&pdev->dev, "unable to find transceiver\n"); | 
|  | ret = -EPROBE_DEFER; | 
|  | goto put_hcd; | 
|  | } | 
|  |  | 
|  | ret = otg_set_host(phy->otg, &hcd->self); | 
|  | if (ret < 0) { | 
|  | dev_err(&pdev->dev, "unable to register with transceiver\n"); | 
|  | goto put_hcd; | 
|  | } | 
|  |  | 
|  | hcd->usb_phy = phy; | 
|  | device_init_wakeup(&pdev->dev, 1); | 
|  | /* | 
|  | * OTG device parent of HCD takes care of putting | 
|  | * hardware into low power mode. | 
|  | */ | 
|  | pm_runtime_no_callbacks(&pdev->dev); | 
|  | pm_runtime_enable(&pdev->dev); | 
|  |  | 
|  | /* FIXME: need to call usb_add_hcd() here? */ | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | put_hcd: | 
|  | usb_put_hcd(hcd); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int ehci_msm_remove(struct platform_device *pdev) | 
|  | { | 
|  | struct usb_hcd *hcd = platform_get_drvdata(pdev); | 
|  |  | 
|  | device_init_wakeup(&pdev->dev, 0); | 
|  | pm_runtime_disable(&pdev->dev); | 
|  | pm_runtime_set_suspended(&pdev->dev); | 
|  |  | 
|  | otg_set_host(hcd->usb_phy->otg, NULL); | 
|  |  | 
|  | /* FIXME: need to call usb_remove_hcd() here? */ | 
|  |  | 
|  | usb_put_hcd(hcd); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PM | 
|  | static int ehci_msm_pm_suspend(struct device *dev) | 
|  | { | 
|  | struct usb_hcd *hcd = dev_get_drvdata(dev); | 
|  | bool do_wakeup = device_may_wakeup(dev); | 
|  |  | 
|  | dev_dbg(dev, "ehci-msm PM suspend\n"); | 
|  |  | 
|  | return ehci_suspend(hcd, do_wakeup); | 
|  | } | 
|  |  | 
|  | static int ehci_msm_pm_resume(struct device *dev) | 
|  | { | 
|  | struct usb_hcd *hcd = dev_get_drvdata(dev); | 
|  |  | 
|  | dev_dbg(dev, "ehci-msm PM resume\n"); | 
|  | ehci_resume(hcd, false); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | #else | 
|  | #define ehci_msm_pm_suspend	NULL | 
|  | #define ehci_msm_pm_resume	NULL | 
|  | #endif | 
|  |  | 
|  | static const struct dev_pm_ops ehci_msm_dev_pm_ops = { | 
|  | .suspend         = ehci_msm_pm_suspend, | 
|  | .resume          = ehci_msm_pm_resume, | 
|  | }; | 
|  |  | 
|  | static const struct of_device_id msm_ehci_dt_match[] = { | 
|  | { .compatible = "qcom,ehci-host", }, | 
|  | {} | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(of, msm_ehci_dt_match); | 
|  |  | 
|  | static struct platform_driver ehci_msm_driver = { | 
|  | .probe	= ehci_msm_probe, | 
|  | .remove	= ehci_msm_remove, | 
|  | .driver = { | 
|  | .name = "msm_hsusb_host", | 
|  | .pm = &ehci_msm_dev_pm_ops, | 
|  | .of_match_table = msm_ehci_dt_match, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static const struct ehci_driver_overrides msm_overrides __initdata = { | 
|  | .reset = ehci_msm_reset, | 
|  | }; | 
|  |  | 
|  | static int __init ehci_msm_init(void) | 
|  | { | 
|  | if (usb_disabled()) | 
|  | return -ENODEV; | 
|  |  | 
|  | pr_info("%s: " DRIVER_DESC "\n", hcd_name); | 
|  | ehci_init_driver(&msm_hc_driver, &msm_overrides); | 
|  | return platform_driver_register(&ehci_msm_driver); | 
|  | } | 
|  | module_init(ehci_msm_init); | 
|  |  | 
|  | static void __exit ehci_msm_cleanup(void) | 
|  | { | 
|  | platform_driver_unregister(&ehci_msm_driver); | 
|  | } | 
|  | module_exit(ehci_msm_cleanup); | 
|  |  | 
|  | MODULE_DESCRIPTION(DRIVER_DESC); | 
|  | MODULE_ALIAS("platform:msm-ehci"); | 
|  | MODULE_LICENSE("GPL"); |