Merge tag 'soc-fixes-6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"These are the expected fixes for the SoC tree. I have let the patches
pile up a little too long, so this is bigger than I would have liked.
- Minor build fixes for Broadcom STB and NXP i.MX8M SoCs as well\ as
TEE firmware
- Updates to the MAINTAINERS file for the PolarFire SoC
- Minor DT fixes for Renesas White Hawk and Arm Versatile and Juno
platforms
- A fix for a missing dependnecy in the NXP DPIO driver
- Broadcom BCA fixes to the newly added devicetree files
- Multiple fixes for Microchip AT91 based SoCs, dealing with
self-refresh timings and regulator settings in DT
- Several DT fixes for NXP i.MX platforms, dealing with incorrect
GPIO settings, extraneous nodes, and a wrong clock setting"
* tag 'soc-fixes-6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (45 commits)
soc: fsl: select FSL_GUTS driver for DPIO
ARM: dts: at91: sama5d2_icp: don't keep vdd_other enabled all the time
ARM: dts: at91: sama5d27_wlsom1: don't keep ldo2 enabled all the time
ARM: dts: at91: sama7g5ek: specify proper regulator output ranges
ARM: dts: at91: sama5d2_icp: specify proper regulator output ranges
ARM: dts: at91: sama5d27_wlsom1: specify proper regulator output ranges
ARM: at91: pm: fix DDR recalibration when resuming from backup and self-refresh
ARM: at91: pm: fix self-refresh for sama7g5
soc: brcmstb: pm-arm: Fix refcount leak and __iomem leak bugs
ARM: configs: at91: remove CONFIG_MICROCHIP_PIT64B
ARM: ixp4xx: fix typos in comments
arm64: dts: renesas: r8a779g0: Fix HSCIF0 interrupt number
tee: fix compiler warning in tee_shm_register()
arm64: dts: freescale: verdin-imx8mp: fix atmel_mxt_ts reset polarity
arm64: dts: freescale: verdin-imx8mm: fix atmel_mxt_ts reset polarity
arm64: dts: imx8mp: Fix I2C5 GPIO assignment on i.MX8M Plus DHCOM
arm64: dts: imx8mm-venice-gw7901: fix port/phy validation
arm64: dts: verdin-imx8mm: add otg2 pd to usbphy
soc: imx: gpcv2: Assert reset before ungating clock
arm64: dts: ls1028a-qds-65bb: don't use in-band autoneg for 2500base-x
...
diff --git a/MAINTAINERS b/MAINTAINERS
index d30f26e..f1390b8 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -17532,9 +17532,19 @@
M: Daire McNamara <daire.mcnamara@microchip.com>
L: linux-riscv@lists.infradead.org
S: Supported
+F: Documentation/devicetree/bindings/clock/microchip,mpfs.yaml
+F: Documentation/devicetree/bindings/gpio/microchip,mpfs-gpio.yaml
+F: Documentation/devicetree/bindings/i2c/microchip,corei2c.yaml
+F: Documentation/devicetree/bindings/mailbox/microchip,mpfs-mailbox.yaml
+F: Documentation/devicetree/bindings/net/can/microchip,mpfs-can.yaml
+F: Documentation/devicetree/bindings/pwm/microchip,corepwm.yaml
+F: Documentation/devicetree/bindings/soc/microchip/microchip,mpfs-sys-controller.yaml
+F: Documentation/devicetree/bindings/spi/microchip,mpfs-spi.yaml
+F: Documentation/devicetree/bindings/usb/microchip,mpfs-musb.yaml
F: arch/riscv/boot/dts/microchip/
F: drivers/char/hw_random/mpfs-rng.c
F: drivers/clk/microchip/clk-mpfs.c
+F: drivers/i2c/busses/i2c-microchip-core.c
F: drivers/mailbox/mailbox-mpfs.c
F: drivers/pci/controller/pcie-microchip-host.c
F: drivers/rtc/rtc-mpfs.c
diff --git a/arch/arm/boot/dts/arm-realview-eb.dtsi b/arch/arm/boot/dts/arm-realview-eb.dtsi
index 2dfb32b..fbb2258 100644
--- a/arch/arm/boot/dts/arm-realview-eb.dtsi
+++ b/arch/arm/boot/dts/arm-realview-eb.dtsi
@@ -399,7 +399,7 @@
compatible = "arm,pl022", "arm,primecell";
reg = <0x1000d000 0x1000>;
clocks = <&sspclk>, <&pclk>;
- clock-names = "SSPCLK", "apb_pclk";
+ clock-names = "sspclk", "apb_pclk";
};
wdog: watchdog@10010000 {
diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm-realview-pb1176.dts
index 06b8723..efed325 100644
--- a/arch/arm/boot/dts/arm-realview-pb1176.dts
+++ b/arch/arm/boot/dts/arm-realview-pb1176.dts
@@ -410,7 +410,7 @@
interrupt-parent = <&intc_dc1176>;
interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&sspclk>, <&pclk>;
- clock-names = "SSPCLK", "apb_pclk";
+ clock-names = "sspclk", "apb_pclk";
};
pb1176_serial0: serial@1010c000 {
diff --git a/arch/arm/boot/dts/arm-realview-pb11mp.dts b/arch/arm/boot/dts/arm-realview-pb11mp.dts
index 295aef4..89103d5 100644
--- a/arch/arm/boot/dts/arm-realview-pb11mp.dts
+++ b/arch/arm/boot/dts/arm-realview-pb11mp.dts
@@ -555,7 +555,7 @@
interrupt-parent = <&intc_pb11mp>;
interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&sspclk>, <&pclk>;
- clock-names = "SSPCLK", "apb_pclk";
+ clock-names = "sspclk", "apb_pclk";
};
watchdog@1000f000 {
diff --git a/arch/arm/boot/dts/arm-realview-pbx.dtsi b/arch/arm/boot/dts/arm-realview-pbx.dtsi
index 6f61f96..ec1507c 100644
--- a/arch/arm/boot/dts/arm-realview-pbx.dtsi
+++ b/arch/arm/boot/dts/arm-realview-pbx.dtsi
@@ -390,7 +390,7 @@
compatible = "arm,pl022", "arm,primecell";
reg = <0x1000d000 0x1000>;
clocks = <&sspclk>, <&pclk>;
- clock-names = "SSPCLK", "apb_pclk";
+ clock-names = "sspclk", "apb_pclk";
};
wdog0: watchdog@1000f000 {
diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi
index 76b2025..83bcf9f 100644
--- a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi
+++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi
@@ -76,8 +76,8 @@
regulators {
vdd_3v3: VDD_IO {
regulator-name = "VDD_IO";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <3700000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
regulator-initial-mode = <2>;
regulator-allowed-modes = <2>, <4>;
regulator-always-on;
@@ -95,8 +95,8 @@
vddio_ddr: VDD_DDR {
regulator-name = "VDD_DDR";
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <1850000>;
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
regulator-initial-mode = <2>;
regulator-allowed-modes = <2>, <4>;
regulator-always-on;
@@ -118,8 +118,8 @@
vdd_core: VDD_CORE {
regulator-name = "VDD_CORE";
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <1850000>;
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <1250000>;
regulator-initial-mode = <2>;
regulator-allowed-modes = <2>, <4>;
regulator-always-on;
@@ -160,8 +160,8 @@
LDO1 {
regulator-name = "LDO1";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <3700000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-state-standby {
@@ -175,9 +175,8 @@
LDO2 {
regulator-name = "LDO2";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <3700000>;
- regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
regulator-state-standby {
regulator-on-in-suspend;
diff --git a/arch/arm/boot/dts/at91-sama5d2_icp.dts b/arch/arm/boot/dts/at91-sama5d2_icp.dts
index 6865be8..dd1dec9 100644
--- a/arch/arm/boot/dts/at91-sama5d2_icp.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_icp.dts
@@ -196,8 +196,8 @@
regulators {
vdd_io_reg: VDD_IO {
regulator-name = "VDD_IO";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <3700000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
regulator-initial-mode = <2>;
regulator-allowed-modes = <2>, <4>;
regulator-always-on;
@@ -215,8 +215,8 @@
VDD_DDR {
regulator-name = "VDD_DDR";
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <1850000>;
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
regulator-initial-mode = <2>;
regulator-allowed-modes = <2>, <4>;
regulator-always-on;
@@ -234,8 +234,8 @@
VDD_CORE {
regulator-name = "VDD_CORE";
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <1850000>;
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <1250000>;
regulator-initial-mode = <2>;
regulator-allowed-modes = <2>, <4>;
regulator-always-on;
@@ -257,7 +257,6 @@
regulator-max-microvolt = <1850000>;
regulator-initial-mode = <2>;
regulator-allowed-modes = <2>, <4>;
- regulator-always-on;
regulator-state-standby {
regulator-on-in-suspend;
@@ -272,8 +271,8 @@
LDO1 {
regulator-name = "LDO1";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <3700000>;
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
regulator-always-on;
regulator-state-standby {
@@ -287,8 +286,8 @@
LDO2 {
regulator-name = "LDO2";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <3700000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-state-standby {
diff --git a/arch/arm/boot/dts/at91-sama7g5ek.dts b/arch/arm/boot/dts/at91-sama7g5ek.dts
index de44da2..3b25c67 100644
--- a/arch/arm/boot/dts/at91-sama7g5ek.dts
+++ b/arch/arm/boot/dts/at91-sama7g5ek.dts
@@ -244,8 +244,8 @@
regulators {
vdd_3v3: VDD_IO {
regulator-name = "VDD_IO";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <3700000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
regulator-initial-mode = <2>;
regulator-allowed-modes = <2>, <4>;
regulator-always-on;
@@ -264,8 +264,8 @@
vddioddr: VDD_DDR {
regulator-name = "VDD_DDR";
- regulator-min-microvolt = <1300000>;
- regulator-max-microvolt = <1450000>;
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
regulator-initial-mode = <2>;
regulator-allowed-modes = <2>, <4>;
regulator-always-on;
@@ -285,8 +285,8 @@
vddcore: VDD_CORE {
regulator-name = "VDD_CORE";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1850000>;
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
regulator-initial-mode = <2>;
regulator-allowed-modes = <2>, <4>;
regulator-always-on;
@@ -306,7 +306,7 @@
vddcpu: VDD_OTHER {
regulator-name = "VDD_OTHER";
regulator-min-microvolt = <1050000>;
- regulator-max-microvolt = <1850000>;
+ regulator-max-microvolt = <1250000>;
regulator-initial-mode = <2>;
regulator-allowed-modes = <2>, <4>;
regulator-ramp-delay = <3125>;
@@ -326,8 +326,8 @@
vldo1: LDO1 {
regulator-name = "LDO1";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <3700000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-state-standby {
diff --git a/arch/arm/boot/dts/bcm63178.dtsi b/arch/arm/boot/dts/bcm63178.dtsi
index 5463443..cbd094d 100644
--- a/arch/arm/boot/dts/bcm63178.dtsi
+++ b/arch/arm/boot/dts/bcm63178.dtsi
@@ -32,6 +32,7 @@
next-level-cache = <&L2_0>;
enable-method = "psci";
};
+
CA7_2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a7";
@@ -39,6 +40,7 @@
next-level-cache = <&L2_0>;
enable-method = "psci";
};
+
L2_0: l2-cache0 {
compatible = "cache";
};
@@ -46,10 +48,10 @@
timer {
compatible = "arm,armv7-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>;
arm,cpu-registers-not-fw-configured;
};
@@ -80,23 +82,23 @@
psci {
compatible = "arm,psci-0.2";
method = "smc";
- cpu_off = <1>;
- cpu_on = <2>;
};
axi@81000000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
- ranges = <0 0x81000000 0x4000>;
+ ranges = <0 0x81000000 0x8000>;
gic: interrupt-controller@1000 {
compatible = "arm,cortex-a7-gic";
#interrupt-cells = <3>;
- #address-cells = <0>;
interrupt-controller;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_HIGH)>;
reg = <0x1000 0x1000>,
- <0x2000 0x2000>;
+ <0x2000 0x2000>,
+ <0x4000 0x2000>,
+ <0x6000 0x2000>;
};
};
diff --git a/arch/arm/boot/dts/bcm6846.dtsi b/arch/arm/boot/dts/bcm6846.dtsi
index e610c10..8aa47a2 100644
--- a/arch/arm/boot/dts/bcm6846.dtsi
+++ b/arch/arm/boot/dts/bcm6846.dtsi
@@ -40,10 +40,10 @@
timer {
compatible = "arm,armv7-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
arm,cpu-registers-not-fw-configured;
};
@@ -65,23 +65,23 @@
psci {
compatible = "arm,psci-0.2";
method = "smc";
- cpu_off = <1>;
- cpu_on = <2>;
};
axi@81000000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
- ranges = <0 0x81000000 0x4000>;
+ ranges = <0 0x81000000 0x8000>;
gic: interrupt-controller@1000 {
compatible = "arm,cortex-a7-gic";
#interrupt-cells = <3>;
- #address-cells = <0>;
interrupt-controller;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
reg = <0x1000 0x1000>,
- <0x2000 0x2000>;
+ <0x2000 0x2000>,
+ <0x4000 0x2000>,
+ <0x6000 0x2000>;
};
};
diff --git a/arch/arm/boot/dts/bcm6878.dtsi b/arch/arm/boot/dts/bcm6878.dtsi
index a7dff59..1e8b5fa 100644
--- a/arch/arm/boot/dts/bcm6878.dtsi
+++ b/arch/arm/boot/dts/bcm6878.dtsi
@@ -32,6 +32,7 @@
next-level-cache = <&L2_0>;
enable-method = "psci";
};
+
L2_0: l2-cache0 {
compatible = "cache";
};
@@ -39,10 +40,10 @@
timer {
compatible = "arm,armv7-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
arm,cpu-registers-not-fw-configured;
};
diff --git a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi
index 095c914..6b791d5 100644
--- a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi
@@ -51,16 +51,6 @@
vin-supply = <®_3p3v_s5>;
};
- reg_3p3v_s0: regulator-3p3v-s0 {
- compatible = "regulator-fixed";
- regulator-name = "V_3V3_S0";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <®_3p3v_s5>;
- };
-
reg_3p3v_s5: regulator-3p3v-s5 {
compatible = "regulator-fixed";
regulator-name = "V_3V3_S5";
@@ -259,7 +249,7 @@
/* default boot source: workaround #1 for errata ERR006282 */
smarc_flash: flash@0 {
- compatible = "winbond,w25q16dw", "jedec,spi-nor";
+ compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <20000000>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi b/arch/arm/boot/dts/imx6qdl-vicut1.dtsi
index a1676b5..c5a98b0 100644
--- a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-vicut1.dtsi
@@ -28,7 +28,7 @@
enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
};
- backlight_led: backlight_led {
+ backlight_led: backlight-led {
compatible = "pwm-backlight";
pwms = <&pwm3 0 5000000 0>;
brightness-levels = <0 16 64 255>;
diff --git a/arch/arm/boot/dts/integratorap-im-pd1.dts b/arch/arm/boot/dts/integratorap-im-pd1.dts
index d47bfb6..4c22e44 100644
--- a/arch/arm/boot/dts/integratorap-im-pd1.dts
+++ b/arch/arm/boot/dts/integratorap-im-pd1.dts
@@ -178,12 +178,12 @@
clock-names = "uartclk", "apb_pclk";
};
- ssp@300000 {
+ spi@300000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x00300000 0x1000>;
interrupts-extended = <&impd1_vic 3>;
clocks = <&impd1_sspclk>, <&sysclk>;
- clock-names = "spiclk", "apb_pclk";
+ clock-names = "sspclk", "apb_pclk";
};
impd1_gpio0: gpio@400000 {
diff --git a/arch/arm/boot/dts/versatile-ab.dts b/arch/arm/boot/dts/versatile-ab.dts
index 79f7cc241..a520615 100644
--- a/arch/arm/boot/dts/versatile-ab.dts
+++ b/arch/arm/boot/dts/versatile-ab.dts
@@ -391,7 +391,7 @@
reg = <0x101f4000 0x1000>;
interrupts = <11>;
clocks = <&xtal24mhz>, <&pclk>;
- clock-names = "SSPCLK", "apb_pclk";
+ clock-names = "sspclk", "apb_pclk";
};
fpga {
diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig
index da90ce9..e185eee 100644
--- a/arch/arm/configs/at91_dt_defconfig
+++ b/arch/arm/configs/at91_dt_defconfig
@@ -196,7 +196,6 @@
CONFIG_DMADEVICES=y
CONFIG_AT_HDMAC=y
CONFIG_AT_XDMAC=y
-CONFIG_MICROCHIP_PIT64B=y
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_IIO=y
CONFIG_AT91_ADC=y
diff --git a/arch/arm/configs/sama7_defconfig b/arch/arm/configs/sama7_defconfig
index 0384030..b2311f0 100644
--- a/arch/arm/configs/sama7_defconfig
+++ b/arch/arm/configs/sama7_defconfig
@@ -188,7 +188,6 @@
CONFIG_DMADEVICES=y
CONFIG_AT_XDMAC=y
CONFIG_STAGING=y
-CONFIG_MICROCHIP_PIT64B=y
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_IIO=y
CONFIG_IIO_SW_TRIGGER=y
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index df6d673..f4501de 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -541,10 +541,42 @@
static int at91_suspend_finish(unsigned long val)
{
+ unsigned char modified_gray_code[] = {
+ 0x00, 0x01, 0x02, 0x03, 0x06, 0x07, 0x04, 0x05, 0x0c, 0x0d,
+ 0x0e, 0x0f, 0x0a, 0x0b, 0x08, 0x09, 0x18, 0x19, 0x1a, 0x1b,
+ 0x1e, 0x1f, 0x1c, 0x1d, 0x14, 0x15, 0x16, 0x17, 0x12, 0x13,
+ 0x10, 0x11,
+ };
+ unsigned int tmp, index;
int i;
if (soc_pm.data.mode == AT91_PM_BACKUP && soc_pm.data.ramc_phy) {
/*
+ * Bootloader will perform DDR recalibration and will try to
+ * restore the ZQ0SR0 with the value saved here. But the
+ * calibration is buggy and restoring some values from ZQ0SR0
+ * is forbidden and risky thus we need to provide processed
+ * values for these (modified gray code values).
+ */
+ tmp = readl(soc_pm.data.ramc_phy + DDR3PHY_ZQ0SR0);
+
+ /* Store pull-down output impedance select. */
+ index = (tmp >> DDR3PHY_ZQ0SR0_PDO_OFF) & 0x1f;
+ soc_pm.bu->ddr_phy_calibration[0] = modified_gray_code[index];
+
+ /* Store pull-up output impedance select. */
+ index = (tmp >> DDR3PHY_ZQ0SR0_PUO_OFF) & 0x1f;
+ soc_pm.bu->ddr_phy_calibration[0] |= modified_gray_code[index];
+
+ /* Store pull-down on-die termination impedance select. */
+ index = (tmp >> DDR3PHY_ZQ0SR0_PDODT_OFF) & 0x1f;
+ soc_pm.bu->ddr_phy_calibration[0] |= modified_gray_code[index];
+
+ /* Store pull-up on-die termination impedance select. */
+ index = (tmp >> DDR3PHY_ZQ0SRO_PUODT_OFF) & 0x1f;
+ soc_pm.bu->ddr_phy_calibration[0] |= modified_gray_code[index];
+
+ /*
* The 1st 8 words of memory might get corrupted in the process
* of DDR PHY recalibration; it is saved here in securam and it
* will be restored later, after recalibration, by bootloader
@@ -1066,10 +1098,6 @@
of_scan_flat_dt(at91_pm_backup_scan_memcs, &located);
if (!located)
goto securam_fail;
-
- /* DDR3PHY_ZQ0SR0 */
- soc_pm.bu->ddr_phy_calibration[0] = readl(soc_pm.data.ramc_phy +
- 0x188);
}
return 0;
diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S
index abe4ced..ffed4d9 100644
--- a/arch/arm/mach-at91/pm_suspend.S
+++ b/arch/arm/mach-at91/pm_suspend.S
@@ -172,9 +172,15 @@
/* Put DDR PHY's DLL in bypass mode for non-backup modes. */
cmp r7, #AT91_PM_BACKUP
beq sr_ena_3
- ldr tmp1, [r3, #DDR3PHY_PIR]
- orr tmp1, tmp1, #DDR3PHY_PIR_DLLBYP
- str tmp1, [r3, #DDR3PHY_PIR]
+
+ /* Disable DX DLLs. */
+ ldr tmp1, [r3, #DDR3PHY_DX0DLLCR]
+ orr tmp1, tmp1, #DDR3PHY_DXDLLCR_DLLDIS
+ str tmp1, [r3, #DDR3PHY_DX0DLLCR]
+
+ ldr tmp1, [r3, #DDR3PHY_DX1DLLCR]
+ orr tmp1, tmp1, #DDR3PHY_DXDLLCR_DLLDIS
+ str tmp1, [r3, #DDR3PHY_DX1DLLCR]
sr_ena_3:
/* Power down DDR PHY data receivers. */
@@ -221,10 +227,14 @@
bic tmp1, tmp1, #DDR3PHY_DSGCR_ODTPDD_ODT0
str tmp1, [r3, #DDR3PHY_DSGCR]
- /* Take DDR PHY's DLL out of bypass mode. */
- ldr tmp1, [r3, #DDR3PHY_PIR]
- bic tmp1, tmp1, #DDR3PHY_PIR_DLLBYP
- str tmp1, [r3, #DDR3PHY_PIR]
+ /* Enable DX DLLs. */
+ ldr tmp1, [r3, #DDR3PHY_DX0DLLCR]
+ bic tmp1, tmp1, #DDR3PHY_DXDLLCR_DLLDIS
+ str tmp1, [r3, #DDR3PHY_DX0DLLCR]
+
+ ldr tmp1, [r3, #DDR3PHY_DX1DLLCR]
+ bic tmp1, tmp1, #DDR3PHY_DXDLLCR_DLLDIS
+ str tmp1, [r3, #DDR3PHY_DX1DLLCR]
/* Enable quasi-dynamic programming. */
mov tmp1, #0
diff --git a/arch/arm/mach-ixp4xx/ixp4xx-of.c b/arch/arm/mach-ixp4xx/ixp4xx-of.c
index f990471..f543e2a 100644
--- a/arch/arm/mach-ixp4xx/ixp4xx-of.c
+++ b/arch/arm/mach-ixp4xx/ixp4xx-of.c
@@ -46,7 +46,7 @@
}
/*
- * We handle 4 differen SoC families. These compatible strings are enough
+ * We handle 4 different SoC families. These compatible strings are enough
* to provide the core so that different boards can add their more detailed
* specifics.
*/
diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi
index 8d0d45d..2f27619 100644
--- a/arch/arm64/boot/dts/arm/juno-base.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-base.dtsi
@@ -26,7 +26,8 @@
compatible = "arm,mhu", "arm,primecell";
reg = <0x0 0x2b1f0000 0x0 0x1000>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
#mbox-cells = <1>;
clocks = <&soc_refclk100mhz>;
clock-names = "apb_pclk";
diff --git a/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi b/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi
index ba88d159..09d2b69 100644
--- a/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi
@@ -67,7 +67,6 @@
port@0 {
reg = <0>;
csys2_funnel_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&etf0_out_port>;
};
};
@@ -75,7 +74,6 @@
port@1 {
reg = <1>;
csys2_funnel_in_port1: endpoint {
- slave-mode;
remote-endpoint = <&etf1_out_port>;
};
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts
index 40d34c8..b949cac 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts
@@ -25,7 +25,6 @@
&enetc_port0 {
phy-handle = <&slot1_sgmii>;
phy-mode = "2500base-x";
- managed = "in-band-status";
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
index 35fb929..d3ee6fc 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
@@ -626,24 +626,28 @@
lan1: port@0 {
reg = <0>;
label = "lan1";
+ phy-mode = "internal";
local-mac-address = [00 00 00 00 00 00];
};
lan2: port@1 {
reg = <1>;
label = "lan2";
+ phy-mode = "internal";
local-mac-address = [00 00 00 00 00 00];
};
lan3: port@2 {
reg = <2>;
label = "lan3";
+ phy-mode = "internal";
local-mac-address = [00 00 00 00 00 00];
};
lan4: port@3 {
reg = <3>;
label = "lan4";
+ phy-mode = "internal";
local-mac-address = [00 00 00 00 00 00];
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
index d1b4582..b379c46 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
@@ -32,10 +32,10 @@
};
/* Fixed clock dedicated to SPI CAN controller */
- clk20m: oscillator {
+ clk40m: oscillator {
compatible = "fixed-clock";
#clock-cells = <0>;
- clock-frequency = <20000000>;
+ clock-frequency = <40000000>;
};
gpio-keys {
@@ -202,8 +202,8 @@
can1: can@0 {
compatible = "microchip,mcp251xfd";
- clocks = <&clk20m>;
- interrupts-extended = <&gpio1 6 IRQ_TYPE_EDGE_FALLING>;
+ clocks = <&clk40m>;
+ interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_can1_int>;
reg = <0>;
@@ -603,7 +603,7 @@
pinctrl-0 = <&pinctrl_gpio_9_dsi>, <&pinctrl_i2s_2_bclk_touch_reset>;
reg = <0x4a>;
/* Verdin I2S_2_BCLK (TOUCH_RESET#, SODIMM 42) */
- reset-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
status = "disabled";
};
@@ -745,6 +745,7 @@
};
&usbphynop2 {
+ power-domains = <&pgc_otg2>;
vcc-supply = <®_vdd_3v3>;
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
index a616eb3..0f13ee3 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
@@ -70,7 +70,7 @@
&ecspi1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
- cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+ cs-gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
status = "disabled";
};
@@ -403,8 +403,8 @@
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c5>;
pinctrl-1 = <&pinctrl_i2c5_gpio>;
- scl-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- sda-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpio3 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio3 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay";
};
@@ -648,10 +648,10 @@
pinctrl_ecspi1: dhcom-ecspi1-grp {
fsl,pins = <
- MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK 0x44
- MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI 0x44
- MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO 0x44
- MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09 0x40
+ MX8MP_IOMUXC_I2C1_SCL__ECSPI1_SCLK 0x44
+ MX8MP_IOMUXC_I2C1_SDA__ECSPI1_MOSI 0x44
+ MX8MP_IOMUXC_I2C2_SCL__ECSPI1_MISO 0x44
+ MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17 0x40
>;
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
index 5212155..6630ec5 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
@@ -770,10 +770,10 @@
pinctrl_sai2: sai2grp {
fsl,pins = <
- MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_SYNC
- MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI2_TX_DATA00
- MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI2_TX_BCLK
- MX8MP_IOMUXC_SAI2_MCLK__AUDIOMIX_SAI2_MCLK
+ MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_SYNC 0xd6
+ MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI2_TX_DATA00 0xd6
+ MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI2_TX_BCLK 0xd6
+ MX8MP_IOMUXC_SAI2_MCLK__AUDIOMIX_SAI2_MCLK 0xd6
>;
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
index c5987bd..1c74c6a 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
@@ -628,7 +628,7 @@
interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
reg = <0x4a>;
/* Verdin GPIO_2 (SODIMM 208) */
- reset-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
status = "disabled";
};
};
@@ -705,7 +705,7 @@
pinctrl-0 = <&pinctrl_gpio_9_dsi>, <&pinctrl_i2s_2_bclk_touch_reset>;
reg = <0x4a>;
/* Verdin I2S_2_BCLK (TOUCH_RESET#, SODIMM 42) */
- reset-gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
status = "disabled";
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi
index 899e8e7..802ad6e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi
@@ -204,7 +204,6 @@
reg = <0x51>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rtc>;
- interrupt-names = "irq";
interrupt-parent = <&gpio1>;
interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
quartz-load-femtofarads = <7000>;
diff --git a/arch/arm64/boot/dts/renesas/r8a779g0.dtsi b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi
index 7cbb0de..1c15726 100644
--- a/arch/arm64/boot/dts/renesas/r8a779g0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi
@@ -85,7 +85,7 @@
"renesas,rcar-gen4-hscif",
"renesas,hscif";
reg = <0 0xe6540000 0 96>;
- interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 514>,
<&cpg CPG_CORE R8A779G0_CLK_S0D3_PER>,
<&scif_clk>;
diff --git a/drivers/soc/bcm/brcmstb/pm/pm-arm.c b/drivers/soc/bcm/brcmstb/pm/pm-arm.c
index d6b30d5..775da69 100644
--- a/drivers/soc/bcm/brcmstb/pm/pm-arm.c
+++ b/drivers/soc/bcm/brcmstb/pm/pm-arm.c
@@ -684,13 +684,14 @@
const struct of_device_id *of_id = NULL;
struct device_node *dn;
void __iomem *base;
- int ret, i;
+ int ret, i, s;
/* AON ctrl registers */
base = brcmstb_ioremap_match(aon_ctrl_dt_ids, 0, NULL);
if (IS_ERR(base)) {
pr_err("error mapping AON_CTRL\n");
- return PTR_ERR(base);
+ ret = PTR_ERR(base);
+ goto aon_err;
}
ctrl.aon_ctrl_base = base;
@@ -700,8 +701,10 @@
/* Assume standard offset */
ctrl.aon_sram = ctrl.aon_ctrl_base +
AON_CTRL_SYSTEM_DATA_RAM_OFS;
+ s = 0;
} else {
ctrl.aon_sram = base;
+ s = 1;
}
writel_relaxed(0, ctrl.aon_sram + AON_REG_PANIC);
@@ -711,7 +714,8 @@
(const void **)&ddr_phy_data);
if (IS_ERR(base)) {
pr_err("error mapping DDR PHY\n");
- return PTR_ERR(base);
+ ret = PTR_ERR(base);
+ goto ddr_phy_err;
}
ctrl.support_warm_boot = ddr_phy_data->supports_warm_boot;
ctrl.pll_status_offset = ddr_phy_data->pll_status_offset;
@@ -731,17 +735,20 @@
for_each_matching_node(dn, ddr_shimphy_dt_ids) {
i = ctrl.num_memc;
if (i >= MAX_NUM_MEMC) {
+ of_node_put(dn);
pr_warn("too many MEMCs (max %d)\n", MAX_NUM_MEMC);
break;
}
base = of_io_request_and_map(dn, 0, dn->full_name);
if (IS_ERR(base)) {
+ of_node_put(dn);
if (!ctrl.support_warm_boot)
break;
pr_err("error mapping DDR SHIMPHY %d\n", i);
- return PTR_ERR(base);
+ ret = PTR_ERR(base);
+ goto ddr_shimphy_err;
}
ctrl.memcs[i].ddr_shimphy_base = base;
ctrl.num_memc++;
@@ -752,14 +759,18 @@
for_each_matching_node(dn, brcmstb_memc_of_match) {
base = of_iomap(dn, 0);
if (!base) {
+ of_node_put(dn);
pr_err("error mapping DDR Sequencer %d\n", i);
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto brcmstb_memc_err;
}
of_id = of_match_node(brcmstb_memc_of_match, dn);
if (!of_id) {
iounmap(base);
- return -EINVAL;
+ of_node_put(dn);
+ ret = -EINVAL;
+ goto brcmstb_memc_err;
}
ddr_seq_data = of_id->data;
@@ -779,21 +790,24 @@
dn = of_find_matching_node(NULL, sram_dt_ids);
if (!dn) {
pr_err("SRAM not found\n");
- return -EINVAL;
+ ret = -EINVAL;
+ goto brcmstb_memc_err;
}
ret = brcmstb_init_sram(dn);
of_node_put(dn);
if (ret) {
pr_err("error setting up SRAM for PM\n");
- return ret;
+ goto brcmstb_memc_err;
}
ctrl.pdev = pdev;
ctrl.s3_params = kmalloc(sizeof(*ctrl.s3_params), GFP_KERNEL);
- if (!ctrl.s3_params)
- return -ENOMEM;
+ if (!ctrl.s3_params) {
+ ret = -ENOMEM;
+ goto s3_params_err;
+ }
ctrl.s3_params_pa = dma_map_single(&pdev->dev, ctrl.s3_params,
sizeof(*ctrl.s3_params),
DMA_TO_DEVICE);
@@ -813,7 +827,21 @@
out:
kfree(ctrl.s3_params);
+s3_params_err:
+ iounmap(ctrl.boot_sram);
+brcmstb_memc_err:
+ for (i--; i >= 0; i--)
+ iounmap(ctrl.memcs[i].ddr_ctrl);
+ddr_shimphy_err:
+ for (i = 0; i < ctrl.num_memc; i++)
+ iounmap(ctrl.memcs[i].ddr_shimphy_base);
+ iounmap(ctrl.memcs[0].ddr_phy_base);
+ddr_phy_err:
+ iounmap(ctrl.aon_ctrl_base);
+ if (s)
+ iounmap(ctrl.aon_sram);
+aon_err:
pr_warn("PM: initialization failed with code %d\n", ret);
return ret;
diff --git a/drivers/soc/fsl/Kconfig b/drivers/soc/fsl/Kconfig
index 07d52ca..fcec6ed 100644
--- a/drivers/soc/fsl/Kconfig
+++ b/drivers/soc/fsl/Kconfig
@@ -24,6 +24,7 @@
tristate "QorIQ DPAA2 DPIO driver"
depends on FSL_MC_BUS
select SOC_BUS
+ select FSL_GUTS
select DIMLIB
help
Driver for the DPAA2 DPIO object. A DPIO provides queue and
diff --git a/drivers/soc/imx/gpcv2.c b/drivers/soc/imx/gpcv2.c
index 6383a4e..88aee59 100644
--- a/drivers/soc/imx/gpcv2.c
+++ b/drivers/soc/imx/gpcv2.c
@@ -335,6 +335,8 @@
}
}
+ reset_control_assert(domain->reset);
+
/* Enable reset clocks for all devices in the domain */
ret = clk_bulk_prepare_enable(domain->num_clks, domain->clks);
if (ret) {
@@ -342,7 +344,8 @@
goto out_regulator_disable;
}
- reset_control_assert(domain->reset);
+ /* delays for reset to propagate */
+ udelay(5);
if (domain->bits.pxx) {
/* request the domain to power up */
diff --git a/drivers/soc/imx/imx8m-blk-ctrl.c b/drivers/soc/imx/imx8m-blk-ctrl.c
index dff7529..972f289 100644
--- a/drivers/soc/imx/imx8m-blk-ctrl.c
+++ b/drivers/soc/imx/imx8m-blk-ctrl.c
@@ -243,7 +243,6 @@
ret = PTR_ERR(domain->power_dev);
goto cleanup_pds;
}
- dev_set_name(domain->power_dev, "%s", data->name);
domain->genpd.name = data->name;
domain->genpd.power_on = imx8m_blk_ctrl_power_on;
diff --git a/drivers/tee/tee_shm.c b/drivers/tee/tee_shm.c
index 1175f3a4..27295bd 100644
--- a/drivers/tee/tee_shm.c
+++ b/drivers/tee/tee_shm.c
@@ -9,6 +9,7 @@
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/tee_drv.h>
+#include <linux/uaccess.h>
#include <linux/uio.h>
#include "tee_private.h"
diff --git a/include/soc/at91/sama7-ddr.h b/include/soc/at91/sama7-ddr.h
index 9e17247..6ce3bd2 100644
--- a/include/soc/at91/sama7-ddr.h
+++ b/include/soc/at91/sama7-ddr.h
@@ -38,6 +38,14 @@
#define DDR3PHY_DSGCR_ODTPDD_ODT0 (1 << 20) /* ODT[0] Power Down Driver */
#define DDR3PHY_ZQ0SR0 (0x188) /* ZQ status register 0 */
+#define DDR3PHY_ZQ0SR0_PDO_OFF (0) /* Pull-down output impedance select offset */
+#define DDR3PHY_ZQ0SR0_PUO_OFF (5) /* Pull-up output impedance select offset */
+#define DDR3PHY_ZQ0SR0_PDODT_OFF (10) /* Pull-down on-die termination impedance select offset */
+#define DDR3PHY_ZQ0SRO_PUODT_OFF (15) /* Pull-up on-die termination impedance select offset */
+
+#define DDR3PHY_DX0DLLCR (0x1CC) /* DDR3PHY DATX8 DLL Control Register */
+#define DDR3PHY_DX1DLLCR (0x20C) /* DDR3PHY DATX8 DLL Control Register */
+#define DDR3PHY_DXDLLCR_DLLDIS (1 << 31) /* DLL Disable */
/* UDDRC */
#define UDDRC_STAT (0x04) /* UDDRC Operating Mode Status Register */
