Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC late updates from Olof Johansson:
 "This is some material that we picked up into our tree late. Most of it
  are smaller fixes and additions, some defconfig updates due to recent
  development, etc.

  Code-wise the largest portion is a series of PM updates for the at91
  platform, and those have been in linux-next a while through the at91
  tree before we picked them up"

* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (29 commits)
  arm64: dts: sprd: Add clock properties for serial devices
  Opt out of scripts/get_maintainer.pl
  ARM: ixp4xx: Remove duplicated include from common.c
  soc: ixp4xx: qmgr: Fix an NULL vs IS_ERR() check in probe
  arm64: tegra: Disable XUSB support on Jetson TX2
  arm64: tegra: Enable SMMU translation for PCI on Tegra186
  arm64: tegra: Fix insecure SMMU users for Tegra186
  arm64: tegra: Select ARM_GIC_PM
  amba: tegra-ahb: Mark PM functions as __maybe_unused
  ARM: dts: logicpd-som-lv: Fix MMC1 card detect
  ARM: mvebu: drop return from void function
  ARM: mvebu: prefix coprocessor operand with p
  ARM: mvebu: drop unnecessary label
  ARM: mvebu: fix a leaked reference by adding missing of_node_put
  ARM: socfpga_defconfig: enable LTC2497
  ARM: mvebu: kirkwood: remove error message when retrieving mac address
  ARM: at91: sama5: make ov2640 as a module
  ARM: OMAP1: ams-delta: fix early boot crash when LED support is disabled
  ARM: at91: remove HAVE_FB_ATMEL for sama5 SoC as they use DRM
  soc/fsl/qe: Fix an error code in qe_pin_request()
  ...
diff --git a/.get_maintainer.ignore b/.get_maintainer.ignore
index cca6d87..a64d219 100644
--- a/.get_maintainer.ignore
+++ b/.get_maintainer.ignore
@@ -1 +1,2 @@
 Christoph Hellwig <hch@lst.de>
+Marc Gonzalez <marc.w.gonzalez@free.fr>
diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.txt b/Documentation/devicetree/bindings/arm/atmel-at91.txt
index 4bf1b4d..99dee23 100644
--- a/Documentation/devicetree/bindings/arm/atmel-at91.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-at91.txt
@@ -25,6 +25,7 @@
     o "atmel,at91sam9n12"
     o "atmel,at91sam9rl"
     o "atmel,at91sam9xe"
+    o "microchip,sam9x60"
  * "atmel,sama5" for SoCs using a Cortex-A5, shall be extended with the specific
    SoC family:
     o "atmel,sama5d2" shall be extended with the specific SoC compatible:
diff --git a/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi b/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi
index 4990ed9..3e39b9a 100644
--- a/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi
+++ b/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi
@@ -153,7 +153,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins>;
 	wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;		/* gpio_126 */
-	cd-gpios = <&gpio4 14 IRQ_TYPE_LEVEL_LOW>;		/* gpio_110 */
+	cd-gpios = <&gpio4 14 GPIO_ACTIVE_LOW>;			/* gpio_110 */
 	vmmc-supply = <&vmmc1>;
 	bus-width = <4>;
 	cap-power-off-card;
diff --git a/arch/arm/configs/sama5_defconfig b/arch/arm/configs/sama5_defconfig
index 515cb37..d5341b0 100644
--- a/arch/arm/configs/sama5_defconfig
+++ b/arch/arm/configs/sama5_defconfig
@@ -150,7 +150,7 @@
 CONFIG_V4L_PLATFORM_DRIVERS=y
 CONFIG_SOC_CAMERA=y
 CONFIG_VIDEO_ATMEL_ISI=y
-CONFIG_SOC_CAMERA_OV2640=y
+CONFIG_SOC_CAMERA_OV2640=m
 CONFIG_DRM=y
 CONFIG_DRM_ATMEL_HLCDC=y
 CONFIG_DRM_PANEL_SIMPLE=y
diff --git a/arch/arm/configs/socfpga_defconfig b/arch/arm/configs/socfpga_defconfig
index 9d42cfe..6701a97 100644
--- a/arch/arm/configs/socfpga_defconfig
+++ b/arch/arm/configs/socfpga_defconfig
@@ -21,7 +21,6 @@
 CONFIG_OPROFILE=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -128,6 +127,8 @@
 CONFIG_DMADEVICES=y
 CONFIG_PL330_DMA=y
 CONFIG_DMATEST=m
+CONFIG_IIO=y
+CONFIG_LTC2497=y
 CONFIG_FPGA=y
 CONFIG_FPGA_MGR_SOCFPGA=y
 CONFIG_FPGA_MGR_SOCFPGA_A10=y
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 903f23c..01b1bdb 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -21,7 +21,6 @@
 	depends on ARCH_MULTI_V7
 	select SOC_SAMA5
 	select CACHE_L2X0
-	select HAVE_FB_ATMEL
 	select HAVE_AT91_UTMI
 	select HAVE_AT91_USB_CLK
 	select HAVE_AT91_H32MX
@@ -36,7 +35,6 @@
 	bool "SAMA5D3 family"
 	depends on ARCH_MULTI_V7
 	select SOC_SAMA5
-	select HAVE_FB_ATMEL
 	select HAVE_AT91_UTMI
 	select HAVE_AT91_SMD
 	select HAVE_AT91_USB_CLK
@@ -50,7 +48,6 @@
 	depends on ARCH_MULTI_V7
 	select SOC_SAMA5
 	select CACHE_L2X0
-	select HAVE_FB_ATMEL
 	select HAVE_AT91_UTMI
 	select HAVE_AT91_SMD
 	select HAVE_AT91_USB_CLK
diff --git a/arch/arm/mach-at91/at91sam9.c b/arch/arm/mach-at91/at91sam9.c
index 3dbdef4..c12563b 100644
--- a/arch/arm/mach-at91/at91sam9.c
+++ b/arch/arm/mach-at91/at91sam9.c
@@ -32,3 +32,21 @@
 	.init_machine	= at91sam9_init,
 	.dt_compat	= at91_dt_board_compat,
 MACHINE_END
+
+static void __init sam9x60_init(void)
+{
+	of_platform_default_populate(NULL, NULL, NULL);
+
+	sam9x60_pm_init();
+}
+
+static const char *const sam9x60_dt_board_compat[] __initconst = {
+	"microchip,sam9x60",
+	NULL
+};
+
+DT_MACHINE_START(sam9x60_dt, "Microchip SAM9X60")
+	/* Maintainer: Microchip */
+	.init_machine	= sam9x60_init,
+	.dt_compat	= sam9x60_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index e2bd172..72b45ac 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -14,11 +14,13 @@
 #ifdef CONFIG_PM
 extern void __init at91rm9200_pm_init(void);
 extern void __init at91sam9_pm_init(void);
+extern void __init sam9x60_pm_init(void);
 extern void __init sama5_pm_init(void);
 extern void __init sama5d2_pm_init(void);
 #else
 static inline void __init at91rm9200_pm_init(void) { }
 static inline void __init at91sam9_pm_init(void) { }
+static inline void __init sam9x60_pm_init(void) { }
 static inline void __init sama5_pm_init(void) { }
 static inline void __init sama5d2_pm_init(void) { }
 #endif
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 2a757dc..6c81475 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -39,6 +39,20 @@
 extern void at91_pinctrl_gpio_resume(void);
 #endif
 
+struct at91_soc_pm {
+	int (*config_shdwc_ws)(void __iomem *shdwc, u32 *mode, u32 *polarity);
+	int (*config_pmc_ws)(void __iomem *pmc, u32 mode, u32 polarity);
+	const struct of_device_id *ws_ids;
+	struct at91_pm_data data;
+};
+
+static struct at91_soc_pm soc_pm = {
+	.data = {
+		.standby_mode = AT91_PM_STANDBY,
+		.suspend_mode = AT91_PM_ULP0,
+	},
+};
+
 static const match_table_t pm_modes __initconst = {
 	{ AT91_PM_STANDBY, "standby" },
 	{ AT91_PM_ULP0, "ulp0" },
@@ -47,16 +61,11 @@
 	{ -1, NULL },
 };
 
-static struct at91_pm_data pm_data = {
-	.standby_mode = AT91_PM_STANDBY,
-	.suspend_mode = AT91_PM_ULP0,
-};
-
 #define at91_ramc_read(id, field) \
-	__raw_readl(pm_data.ramc[id] + field)
+	__raw_readl(soc_pm.data.ramc[id] + field)
 
 #define at91_ramc_write(id, field, value) \
-	__raw_writel(value, pm_data.ramc[id] + field)
+	__raw_writel(value, soc_pm.data.ramc[id] + field)
 
 static int at91_pm_valid_state(suspend_state_t state)
 {
@@ -91,6 +100,8 @@
 	{ .pmc_fsmr_bit = AT91_PMC_RTCAL,	.shdwc_mr_bit = BIT(17) },
 	{ .pmc_fsmr_bit = AT91_PMC_USBAL },
 	{ .pmc_fsmr_bit = AT91_PMC_SDMMC_CD },
+	{ .pmc_fsmr_bit = AT91_PMC_RTTAL },
+	{ .pmc_fsmr_bit = AT91_PMC_RXLP_MCE },
 };
 
 static const struct of_device_id sama5d2_ws_ids[] = {
@@ -105,6 +116,17 @@
 	{ /* sentinel */ }
 };
 
+static const struct of_device_id sam9x60_ws_ids[] = {
+	{ .compatible = "atmel,at91sam9x5-rtc",		.data = &ws_info[1] },
+	{ .compatible = "atmel,at91rm9200-ohci",	.data = &ws_info[2] },
+	{ .compatible = "usb-ohci",			.data = &ws_info[2] },
+	{ .compatible = "atmel,at91sam9g45-ehci",	.data = &ws_info[2] },
+	{ .compatible = "usb-ehci",			.data = &ws_info[2] },
+	{ .compatible = "atmel,at91sam9260-rtt",	.data = &ws_info[4] },
+	{ .compatible = "cdns,sam9x60-macb",		.data = &ws_info[5] },
+	{ /* sentinel */ }
+};
+
 static int at91_pm_config_ws(unsigned int pm_mode, bool set)
 {
 	const struct wakeup_source_info *wsi;
@@ -116,24 +138,22 @@
 	if (pm_mode != AT91_PM_ULP1)
 		return 0;
 
-	if (!pm_data.pmc || !pm_data.shdwc)
+	if (!soc_pm.data.pmc || !soc_pm.data.shdwc || !soc_pm.ws_ids)
 		return -EPERM;
 
 	if (!set) {
-		writel(mode, pm_data.pmc + AT91_PMC_FSMR);
+		writel(mode, soc_pm.data.pmc + AT91_PMC_FSMR);
 		return 0;
 	}
 
-	/* SHDWC.WUIR */
-	val = readl(pm_data.shdwc + 0x0c);
-	mode |= (val & 0x3ff);
-	polarity |= ((val >> 16) & 0x3ff);
+	if (soc_pm.config_shdwc_ws)
+		soc_pm.config_shdwc_ws(soc_pm.data.shdwc, &mode, &polarity);
 
 	/* SHDWC.MR */
-	val = readl(pm_data.shdwc + 0x04);
+	val = readl(soc_pm.data.shdwc + 0x04);
 
 	/* Loop through defined wakeup sources. */
-	for_each_matching_node_and_match(np, sama5d2_ws_ids, &match) {
+	for_each_matching_node_and_match(np, soc_pm.ws_ids, &match) {
 		pdev = of_find_device_by_node(np);
 		if (!pdev)
 			continue;
@@ -155,8 +175,8 @@
 	}
 
 	if (mode) {
-		writel(mode, pm_data.pmc + AT91_PMC_FSMR);
-		writel(polarity, pm_data.pmc + AT91_PMC_FSPR);
+		if (soc_pm.config_pmc_ws)
+			soc_pm.config_pmc_ws(soc_pm.data.pmc, mode, polarity);
 	} else {
 		pr_err("AT91: PM: no ULP1 wakeup sources found!");
 	}
@@ -164,6 +184,34 @@
 	return mode ? 0 : -EPERM;
 }
 
+static int at91_sama5d2_config_shdwc_ws(void __iomem *shdwc, u32 *mode,
+					u32 *polarity)
+{
+	u32 val;
+
+	/* SHDWC.WUIR */
+	val = readl(shdwc + 0x0c);
+	*mode |= (val & 0x3ff);
+	*polarity |= ((val >> 16) & 0x3ff);
+
+	return 0;
+}
+
+static int at91_sama5d2_config_pmc_ws(void __iomem *pmc, u32 mode, u32 polarity)
+{
+	writel(mode, pmc + AT91_PMC_FSMR);
+	writel(polarity, pmc + AT91_PMC_FSPR);
+
+	return 0;
+}
+
+static int at91_sam9x60_config_pmc_ws(void __iomem *pmc, u32 mode, u32 polarity)
+{
+	writel(mode, pmc + AT91_PMC_FSMR);
+
+	return 0;
+}
+
 /*
  * Called after processes are frozen, but before we shutdown devices.
  */
@@ -171,18 +219,18 @@
 {
 	switch (state) {
 	case PM_SUSPEND_MEM:
-		pm_data.mode = pm_data.suspend_mode;
+		soc_pm.data.mode = soc_pm.data.suspend_mode;
 		break;
 
 	case PM_SUSPEND_STANDBY:
-		pm_data.mode = pm_data.standby_mode;
+		soc_pm.data.mode = soc_pm.data.standby_mode;
 		break;
 
 	default:
-		pm_data.mode = -1;
+		soc_pm.data.mode = -1;
 	}
 
-	return at91_pm_config_ws(pm_data.mode, true);
+	return at91_pm_config_ws(soc_pm.data.mode, true);
 }
 
 /*
@@ -194,10 +242,10 @@
 	unsigned long scsr;
 	int i;
 
-	scsr = readl(pm_data.pmc + AT91_PMC_SCSR);
+	scsr = readl(soc_pm.data.pmc + AT91_PMC_SCSR);
 
 	/* USB must not be using PLLB */
-	if ((scsr & pm_data.uhp_udp_mask) != 0) {
+	if ((scsr & soc_pm.data.uhp_udp_mask) != 0) {
 		pr_err("AT91: PM - Suspend-to-RAM with USB still active\n");
 		return 0;
 	}
@@ -208,7 +256,7 @@
 
 		if ((scsr & (AT91_PMC_PCK0 << i)) == 0)
 			continue;
-		css = readl(pm_data.pmc + AT91_PMC_PCKR(i)) & AT91_PMC_CSS;
+		css = readl(soc_pm.data.pmc + AT91_PMC_PCKR(i)) & AT91_PMC_CSS;
 		if (css != AT91_PMC_CSS_SLOW) {
 			pr_err("AT91: PM - Suspend-to-RAM with PCK%d src %d\n", i, css);
 			return 0;
@@ -230,7 +278,7 @@
  */
 int at91_suspend_entering_slow_clock(void)
 {
-	return (pm_data.mode >= AT91_PM_ULP0);
+	return (soc_pm.data.mode >= AT91_PM_ULP0);
 }
 EXPORT_SYMBOL(at91_suspend_entering_slow_clock);
 
@@ -243,14 +291,14 @@
 	flush_cache_all();
 	outer_disable();
 
-	at91_suspend_sram_fn(&pm_data);
+	at91_suspend_sram_fn(&soc_pm.data);
 
 	return 0;
 }
 
 static void at91_pm_suspend(suspend_state_t state)
 {
-	if (pm_data.mode == AT91_PM_BACKUP) {
+	if (soc_pm.data.mode == AT91_PM_BACKUP) {
 		pm_bu->suspended = 1;
 
 		cpu_suspend(0, at91_suspend_finish);
@@ -289,7 +337,7 @@
 		/*
 		 * Ensure that clocks are in a valid state.
 		 */
-		if (pm_data.mode >= AT91_PM_ULP0 &&
+		if (soc_pm.data.mode >= AT91_PM_ULP0 &&
 		    !at91_pm_verify_clocks())
 			goto error;
 
@@ -318,7 +366,7 @@
  */
 static void at91_pm_end(void)
 {
-	at91_pm_config_ws(pm_data.mode, false);
+	at91_pm_config_ws(soc_pm.data.mode, false);
 }
 
 
@@ -351,7 +399,7 @@
 		"    str    %2, [%1, %3]\n\t"
 		"    mcr    p15, 0, %0, c7, c0, 4\n\t"
 		:
-		: "r" (0), "r" (pm_data.ramc[0]),
+		: "r" (0), "r" (soc_pm.data.ramc[0]),
 		  "r" (1), "r" (AT91_MC_SDRAMC_SRR));
 }
 
@@ -374,7 +422,7 @@
 		at91_ramc_write(0, AT91_DDRSDRC_MDR, mdr);
 	}
 
-	if (pm_data.ramc[1]) {
+	if (soc_pm.data.ramc[1]) {
 		saved_lpr1 = at91_ramc_read(1, AT91_DDRSDRC_LPR);
 		lpr1 = saved_lpr1 & ~AT91_DDRSDRC_LPCB;
 		lpr1 |= AT91_DDRSDRC_LPCB_SELF_REFRESH;
@@ -392,14 +440,14 @@
 
 	/* self-refresh mode now */
 	at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr0);
-	if (pm_data.ramc[1])
+	if (soc_pm.data.ramc[1])
 		at91_ramc_write(1, AT91_DDRSDRC_LPR, lpr1);
 
 	cpu_do_idle();
 
 	at91_ramc_write(0, AT91_DDRSDRC_MDR, saved_mdr0);
 	at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0);
-	if (pm_data.ramc[1]) {
+	if (soc_pm.data.ramc[1]) {
 		at91_ramc_write(0, AT91_DDRSDRC_MDR, saved_mdr1);
 		at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1);
 	}
@@ -429,7 +477,7 @@
 	u32 lpr0, lpr1 = 0;
 	u32 saved_lpr0, saved_lpr1 = 0;
 
-	if (pm_data.ramc[1]) {
+	if (soc_pm.data.ramc[1]) {
 		saved_lpr1 = at91_ramc_read(1, AT91_SDRAMC_LPR);
 		lpr1 = saved_lpr1 & ~AT91_SDRAMC_LPCB;
 		lpr1 |= AT91_SDRAMC_LPCB_SELF_REFRESH;
@@ -441,13 +489,13 @@
 
 	/* self-refresh mode now */
 	at91_ramc_write(0, AT91_SDRAMC_LPR, lpr0);
-	if (pm_data.ramc[1])
+	if (soc_pm.data.ramc[1])
 		at91_ramc_write(1, AT91_SDRAMC_LPR, lpr1);
 
 	cpu_do_idle();
 
 	at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr0);
-	if (pm_data.ramc[1])
+	if (soc_pm.data.ramc[1])
 		at91_ramc_write(1, AT91_SDRAMC_LPR, saved_lpr1);
 }
 
@@ -480,14 +528,14 @@
 	const struct ramc_info *ramc;
 
 	for_each_matching_node_and_match(np, ramc_ids, &of_id) {
-		pm_data.ramc[idx] = of_iomap(np, 0);
-		if (!pm_data.ramc[idx])
+		soc_pm.data.ramc[idx] = of_iomap(np, 0);
+		if (!soc_pm.data.ramc[idx])
 			panic(pr_fmt("unable to map ramc[%d] cpu registers\n"), idx);
 
 		ramc = of_id->data;
 		if (!standby)
 			standby = ramc->idle;
-		pm_data.memctrl = ramc->memctrl;
+		soc_pm.data.memctrl = ramc->memctrl;
 
 		idx++;
 	}
@@ -509,12 +557,17 @@
 	 * Disable the processor clock.  The processor will be automatically
 	 * re-enabled by an interrupt or by a reset.
 	 */
-	writel(AT91_PMC_PCK, pm_data.pmc + AT91_PMC_SCDR);
+	writel(AT91_PMC_PCK, soc_pm.data.pmc + AT91_PMC_SCDR);
+}
+
+static void at91sam9x60_idle(void)
+{
+	cpu_do_idle();
 }
 
 static void at91sam9_idle(void)
 {
-	writel(AT91_PMC_PCK, pm_data.pmc + AT91_PMC_SCDR);
+	writel(AT91_PMC_PCK, soc_pm.data.pmc + AT91_PMC_SCDR);
 	cpu_do_idle();
 }
 
@@ -566,8 +619,8 @@
 
 static bool __init at91_is_pm_mode_active(int pm_mode)
 {
-	return (pm_data.standby_mode == pm_mode ||
-		pm_data.suspend_mode == pm_mode);
+	return (soc_pm.data.standby_mode == pm_mode ||
+		soc_pm.data.suspend_mode == pm_mode);
 }
 
 static int __init at91_pm_backup_init(void)
@@ -577,6 +630,9 @@
 	struct platform_device *pdev = NULL;
 	int ret = -ENODEV;
 
+	if (!IS_ENABLED(CONFIG_SOC_SAMA5D2))
+		return -EPERM;
+
 	if (!at91_is_pm_mode_active(AT91_PM_BACKUP))
 		return 0;
 
@@ -586,7 +642,7 @@
 		return ret;
 	}
 
-	pm_data.sfrbu = of_iomap(np, 0);
+	soc_pm.data.sfrbu = of_iomap(np, 0);
 	of_node_put(np);
 
 	np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-securam");
@@ -622,8 +678,8 @@
 securam_fail:
 	put_device(&pdev->dev);
 securam_fail_no_ref_dev:
-	iounmap(pm_data.sfrbu);
-	pm_data.sfrbu = NULL;
+	iounmap(soc_pm.data.sfrbu);
+	soc_pm.data.sfrbu = NULL;
 	return ret;
 }
 
@@ -632,10 +688,10 @@
 	if (pm_mode != AT91_PM_ULP1 && pm_mode != AT91_PM_BACKUP)
 		return;
 
-	if (pm_data.standby_mode == pm_mode)
-		pm_data.standby_mode = AT91_PM_ULP0;
-	if (pm_data.suspend_mode == pm_mode)
-		pm_data.suspend_mode = AT91_PM_ULP0;
+	if (soc_pm.data.standby_mode == pm_mode)
+		soc_pm.data.standby_mode = AT91_PM_ULP0;
+	if (soc_pm.data.suspend_mode == pm_mode)
+		soc_pm.data.suspend_mode = AT91_PM_ULP0;
 }
 
 static void __init at91_pm_modes_init(void)
@@ -653,7 +709,7 @@
 		goto ulp1_default;
 	}
 
-	pm_data.shdwc = of_iomap(np, 0);
+	soc_pm.data.shdwc = of_iomap(np, 0);
 	of_node_put(np);
 
 	ret = at91_pm_backup_init();
@@ -667,8 +723,8 @@
 	return;
 
 unmap:
-	iounmap(pm_data.shdwc);
-	pm_data.shdwc = NULL;
+	iounmap(soc_pm.data.shdwc);
+	soc_pm.data.shdwc = NULL;
 ulp1_default:
 	at91_pm_use_default_mode(AT91_PM_ULP1);
 backup_default:
@@ -711,14 +767,14 @@
 		platform_device_register(&at91_cpuidle_device);
 
 	pmc_np = of_find_matching_node_and_match(NULL, atmel_pmc_ids, &of_id);
-	pm_data.pmc = of_iomap(pmc_np, 0);
-	if (!pm_data.pmc) {
+	soc_pm.data.pmc = of_iomap(pmc_np, 0);
+	if (!soc_pm.data.pmc) {
 		pr_err("AT91: PM not supported, PMC not found\n");
 		return;
 	}
 
 	pmc = of_id->data;
-	pm_data.uhp_udp_mask = pmc->uhp_udp_mask;
+	soc_pm.data.uhp_udp_mask = pmc->uhp_udp_mask;
 
 	if (pm_idle)
 		arm_pm_idle = pm_idle;
@@ -728,8 +784,8 @@
 	if (at91_suspend_sram_fn) {
 		suspend_set_ops(&at91_pm_ops);
 		pr_info("AT91: PM: standby: %s, suspend: %s\n",
-			pm_modes[pm_data.standby_mode].pattern,
-			pm_modes[pm_data.suspend_mode].pattern);
+			pm_modes[soc_pm.data.standby_mode].pattern,
+			pm_modes[soc_pm.data.suspend_mode].pattern);
 	} else {
 		pr_info("AT91: PM not supported, due to no SRAM allocated\n");
 	}
@@ -750,6 +806,19 @@
 	at91_pm_init(at91rm9200_idle);
 }
 
+void __init sam9x60_pm_init(void)
+{
+	if (!IS_ENABLED(CONFIG_SOC_AT91SAM9))
+		return;
+
+	at91_pm_modes_init();
+	at91_dt_ramc();
+	at91_pm_init(at91sam9x60_idle);
+
+	soc_pm.ws_ids = sam9x60_ws_ids;
+	soc_pm.config_pmc_ws = at91_sam9x60_config_pmc_ws;
+}
+
 void __init at91sam9_pm_init(void)
 {
 	if (!IS_ENABLED(CONFIG_SOC_AT91SAM9))
@@ -775,6 +844,10 @@
 
 	at91_pm_modes_init();
 	sama5_pm_init();
+
+	soc_pm.ws_ids = sama5d2_ws_ids;
+	soc_pm.config_shdwc_ws = at91_sama5d2_config_shdwc_ws;
+	soc_pm.config_pmc_ws = at91_sama5d2_config_pmc_ws;
 }
 
 static int __init at91_pm_modes_select(char *str)
@@ -795,8 +868,8 @@
 	if (suspend < 0)
 		return 0;
 
-	pm_data.standby_mode = standby;
-	pm_data.suspend_mode = suspend;
+	soc_pm.data.standby_mode = standby;
+	soc_pm.data.suspend_mode = suspend;
 
 	return 0;
 }
diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S
index bfe1c4d..77e2930 100644
--- a/arch/arm/mach-at91/pm_suspend.S
+++ b/arch/arm/mach-at91/pm_suspend.S
@@ -51,15 +51,6 @@
 	.endm
 
 /*
- * Wait until PLLA has locked.
- */
-	.macro wait_pllalock
-1:	ldr	tmp1, [pmc, #AT91_PMC_SR]
-	tst	tmp1, #AT91_PMC_LOCKA
-	beq	1b
-	.endm
-
-/*
  * Put the processor to enter the idle state
  */
 	.macro at91_cpu_idle
@@ -178,11 +169,46 @@
 	orr	tmp1, tmp1, #AT91_PMC_KEY
 	str	tmp1, [pmc, #AT91_CKGR_MOR]
 
+	/* Save RC oscillator state */
+	ldr	tmp1, [pmc, #AT91_PMC_SR]
+	str	tmp1, .saved_osc_status
+	tst	tmp1, #AT91_PMC_MOSCRCS
+	bne	1f
+
+	/* Turn off RC oscillator */
+	ldr	tmp1, [pmc, #AT91_CKGR_MOR]
+	bic	tmp1, tmp1, #AT91_PMC_MOSCRCEN
+	bic	tmp1, tmp1, #AT91_PMC_KEY_MASK
+	orr	tmp1, tmp1, #AT91_PMC_KEY
+	str	tmp1, [pmc, #AT91_CKGR_MOR]
+
+	/* Wait main RC disabled done */
+2:	ldr	tmp1, [pmc, #AT91_PMC_SR]
+	tst	tmp1, #AT91_PMC_MOSCRCS
+	bne	2b
+
 	/* Wait for interrupt */
-	at91_cpu_idle
+1:	at91_cpu_idle
+
+	/* Restore RC oscillator state */
+	ldr	tmp1, .saved_osc_status
+	tst	tmp1, #AT91_PMC_MOSCRCS
+	beq	4f
+
+	/* Turn on RC oscillator */
+	ldr	tmp1, [pmc, #AT91_CKGR_MOR]
+	orr	tmp1, tmp1, #AT91_PMC_MOSCRCEN
+	bic	tmp1, tmp1, #AT91_PMC_KEY_MASK
+	orr	tmp1, tmp1, #AT91_PMC_KEY
+	str	tmp1, [pmc, #AT91_CKGR_MOR]
+
+	/* Wait main RC stabilization */
+3:	ldr	tmp1, [pmc, #AT91_PMC_SR]
+	tst	tmp1, #AT91_PMC_MOSCRCS
+	beq	3b
 
 	/* Turn on the crystal oscillator */
-	ldr	tmp1, [pmc, #AT91_CKGR_MOR]
+4:	ldr	tmp1, [pmc, #AT91_CKGR_MOR]
 	orr	tmp1, tmp1, #AT91_PMC_MOSCEN
 	orr	tmp1, tmp1, #AT91_PMC_KEY
 	str	tmp1, [pmc, #AT91_CKGR_MOR]
@@ -197,8 +223,26 @@
 .macro at91_pm_ulp1_mode
 	ldr	pmc, .pmc_base
 
-	/* Switch the main clock source to 12-MHz RC oscillator */
+	/* Save RC oscillator state and check if it is enabled. */
+	ldr	tmp1, [pmc, #AT91_PMC_SR]
+	str	tmp1, .saved_osc_status
+	tst	tmp1, #AT91_PMC_MOSCRCS
+	bne	2f
+
+	/* Enable RC oscillator */
 	ldr	tmp1, [pmc, #AT91_CKGR_MOR]
+	orr	tmp1, tmp1, #AT91_PMC_MOSCRCEN
+	bic	tmp1, tmp1, #AT91_PMC_KEY_MASK
+	orr	tmp1, tmp1, #AT91_PMC_KEY
+	str	tmp1, [pmc, #AT91_CKGR_MOR]
+
+	/* Wait main RC stabilization */
+1:	ldr	tmp1, [pmc, #AT91_PMC_SR]
+	tst	tmp1, #AT91_PMC_MOSCRCS
+	beq	1b
+
+	/* Switch the main clock source to 12-MHz RC oscillator */
+2:	ldr	tmp1, [pmc, #AT91_CKGR_MOR]
 	bic	tmp1, tmp1, #AT91_PMC_MOSCSEL
 	bic	tmp1, tmp1, #AT91_PMC_KEY_MASK
 	orr	tmp1, tmp1, #AT91_PMC_KEY
@@ -262,6 +306,25 @@
 	str	tmp1, [pmc, #AT91_PMC_MCKR]
 
 	wait_mckrdy
+
+	/* Restore RC oscillator state */
+	ldr	tmp1, .saved_osc_status
+	tst	tmp1, #AT91_PMC_MOSCRCS
+	bne	3f
+
+	/* Disable RC oscillator */
+	ldr	tmp1, [pmc, #AT91_CKGR_MOR]
+	bic	tmp1, tmp1, #AT91_PMC_MOSCRCEN
+	bic	tmp1, tmp1, #AT91_PMC_KEY_MASK
+	orr	tmp1, tmp1, #AT91_PMC_KEY
+	str	tmp1, [pmc, #AT91_CKGR_MOR]
+
+	/* Wait RC oscillator disable done */
+4:	ldr	tmp1, [pmc, #AT91_PMC_SR]
+	tst	tmp1, #AT91_PMC_MOSCRCS
+	bne	4b
+
+3:
 .endm
 
 ENTRY(at91_ulp_mode)
@@ -279,14 +342,6 @@
 
 	wait_mckrdy
 
-	/* Save PLLA setting and disable it */
-	ldr	tmp1, [pmc, #AT91_CKGR_PLLAR]
-	str	tmp1, .saved_pllar
-
-	mov	tmp1, #AT91_PMC_PLLCOUNT
-	orr	tmp1, tmp1, #(1 << 29)		/* bit 29 always set */
-	str	tmp1, [pmc, #AT91_CKGR_PLLAR]
-
 	ldr	r0, .pm_mode
 	cmp	r0, #AT91_PM_ULP1
 	beq	ulp1_mode
@@ -301,18 +356,6 @@
 ulp_exit:
 	ldr	pmc, .pmc_base
 
-	/* Restore PLLA setting */
-	ldr	tmp1, .saved_pllar
-	str	tmp1, [pmc, #AT91_CKGR_PLLAR]
-
-	tst	tmp1, #(AT91_PMC_MUL &  0xff0000)
-	bne	3f
-	tst	tmp1, #(AT91_PMC_MUL & ~0xff0000)
-	beq	4f
-3:
-	wait_pllalock
-4:
-
 	/*
 	 * Restore master clock setting
 	 */
@@ -465,8 +508,6 @@
 	.word 0
 .saved_mckr:
 	.word 0
-.saved_pllar:
-	.word 0
 .saved_sam9_lpr:
 	.word 0
 .saved_sam9_lpr1:
@@ -475,6 +516,8 @@
 	.word 0
 .saved_sam9_mdr1:
 	.word 0
+.saved_osc_status:
+	.word 0
 
 ENTRY(at91_pm_suspend_in_sram_sz)
 	.word .-at91_pm_suspend_in_sram
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index cc5f156..381f452 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -27,7 +27,6 @@
 #include <linux/cpu.h>
 #include <linux/pci.h>
 #include <linux/sched_clock.h>
-#include <linux/bitops.h>
 #include <linux/irqchip/irq-ixp4xx.h>
 #include <linux/platform_data/timer-ixp4xx.h>
 #include <mach/udc.h>
diff --git a/arch/arm/mach-mvebu/board-v7.c b/arch/arm/mach-mvebu/board-v7.c
index 0b10acd..d2df5ef 100644
--- a/arch/arm/mach-mvebu/board-v7.c
+++ b/arch/arm/mach-mvebu/board-v7.c
@@ -136,7 +136,6 @@
 
 		of_update_property(np, new_compat);
 	}
-	return;
 }
 
 static void __init mvebu_dt_init(void)
diff --git a/arch/arm/mach-mvebu/coherency_ll.S b/arch/arm/mach-mvebu/coherency_ll.S
index 8b2fbc8..2d962fe 100644
--- a/arch/arm/mach-mvebu/coherency_ll.S
+++ b/arch/arm/mach-mvebu/coherency_ll.S
@@ -66,7 +66,7 @@
  * fabric registers
  */
 ENTRY(ll_get_coherency_cpumask)
-	mrc	15, 0, r3, cr0, cr0, 5
+	mrc	p15, 0, r3, cr0, cr0, 5
 	and	r3, r3, #15
 	mov	r2, #(1 << 24)
 	lsl	r3, r2, r3
diff --git a/arch/arm/mach-mvebu/kirkwood.c b/arch/arm/mach-mvebu/kirkwood.c
index 9b5f4d6..ceaad6d 100644
--- a/arch/arm/mach-mvebu/kirkwood.c
+++ b/arch/arm/mach-mvebu/kirkwood.c
@@ -108,8 +108,6 @@
 		clk_prepare_enable(clk);
 
 		/* store MAC address register contents in local-mac-address */
-		pr_err(FW_INFO "%pOF: local-mac-address is not set\n", np);
-
 		pmac = kzalloc(sizeof(*pmac) + 6, GFP_KERNEL);
 		if (!pmac)
 			goto eth_fixup_no_mem;
diff --git a/arch/arm/mach-mvebu/pm-board.c b/arch/arm/mach-mvebu/pm-board.c
index db17121..0705525 100644
--- a/arch/arm/mach-mvebu/pm-board.c
+++ b/arch/arm/mach-mvebu/pm-board.c
@@ -79,7 +79,7 @@
 static int __init mvebu_armada_pm_init(void)
 {
 	struct device_node *np;
-	struct device_node *gpio_ctrl_np;
+	struct device_node *gpio_ctrl_np = NULL;
 	int ret = 0, i;
 
 	if (!of_machine_is_compatible("marvell,axp-gp"))
@@ -126,18 +126,23 @@
 			goto out;
 		}
 
+		if (gpio_ctrl_np)
+			of_node_put(gpio_ctrl_np);
 		gpio_ctrl_np = args.np;
 		pic_raw_gpios[i] = args.args[0];
 	}
 
 	gpio_ctrl = of_iomap(gpio_ctrl_np, 0);
-	if (!gpio_ctrl)
-		return -ENOMEM;
+	if (!gpio_ctrl) {
+		ret = -ENOMEM;
+		goto out;
+	}
 
 	mvebu_pm_suspend_init(mvebu_armada_pm_enter);
 
 out:
 	of_node_put(np);
+	of_node_put(gpio_ctrl_np);
 	return ret;
 }
 
diff --git a/arch/arm/mach-mvebu/pmsu_ll.S b/arch/arm/mach-mvebu/pmsu_ll.S
index 8865122..7aae9a2 100644
--- a/arch/arm/mach-mvebu/pmsu_ll.S
+++ b/arch/arm/mach-mvebu/pmsu_ll.S
@@ -16,7 +16,7 @@
 ENTRY(armada_38x_scu_power_up)
 	mrc     p15, 4, r1, c15, c0	@ get SCU base address
 	orr	r1, r1, #0x8		@ SCU CPU Power Status Register
-	mrc	15, 0, r0, cr0, cr0, 5	@ get the CPU ID
+	mrc	p15, 0, r0, cr0, cr0, 5	@ get the CPU ID
 	and	r0, r0, #15
 	add	r1, r1, r0
 	mov	r0, #0x0
@@ -56,7 +56,6 @@
 
 /* The following code will be executed from SRAM */
 ENTRY(mvebu_boot_wa_start)
-mvebu_boot_wa_start:
 ARM_BE8(setend	be)
 	adr	r0, 1f
 	ldr	r0, [r0]		@ load the address of the
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 1b15d59..b6e8141 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -749,7 +749,7 @@
 				ARRAY_SIZE(ams_delta_gpio_tables));
 
 	leds_pdev = gpio_led_register_device(PLATFORM_DEVID_NONE, &leds_pdata);
-	if (!IS_ERR(leds_pdev)) {
+	if (!IS_ERR_OR_NULL(leds_pdev)) {
 		leds_gpio_table.dev_id = dev_name(&leds_pdev->dev);
 		gpiod_add_lookup_table(&leds_gpio_table);
 	}
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 0f4d918..1001410 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -215,6 +215,7 @@
 config ARCH_TEGRA
 	bool "NVIDIA Tegra SoC Family"
 	select ARCH_HAS_RESET_CONTROLLER
+	select ARM_GIC_PM
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
 	select TIMER_OF
diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
index 75ee6cf..14d7fea 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
@@ -59,7 +59,7 @@
 	};
 
 	padctl@3520000 {
-		status = "okay";
+		status = "disabled";
 
 		avdd-pll-erefeut-supply = <&vdd_1v8_pll>;
 		avdd-usb-supply = <&vdd_3v3_sys>;
@@ -137,7 +137,7 @@
 	};
 
 	usb@3530000 {
-		status = "okay";
+		status = "disabled";
 
 		phys = <&{/padctl@3520000/pads/usb2/lanes/usb2-0}>,
 		       <&{/padctl@3520000/pads/usb2/lanes/usb2-1}>,
diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
index f0bb6ce..426ac0b 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
@@ -60,6 +60,7 @@
 		clock-names = "master_bus", "slave_bus", "rx", "tx", "ptp_ref";
 		resets = <&bpmp TEGRA186_RESET_EQOS>;
 		reset-names = "eqos";
+		iommus = <&smmu TEGRA186_SID_EQOS>;
 		status = "disabled";
 
 		snps,write-requests = <1>;
@@ -338,6 +339,7 @@
 			 <&bpmp TEGRA186_RESET_HDA2CODEC_2X>;
 		reset-names = "hda", "hda2hdmi", "hda2codec_2x";
 		power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>;
+		iommus = <&smmu TEGRA186_SID_HDA>;
 		status = "disabled";
 	};
 
@@ -671,6 +673,10 @@
 			 <&bpmp TEGRA186_RESET_PCIEXCLK>;
 		reset-names = "afi", "pex", "pcie_x";
 
+		iommus = <&smmu TEGRA186_SID_AFI>;
+		iommu-map = <0x0 &smmu TEGRA186_SID_AFI 0x1000>;
+		iommu-map-mask = <0x0>;
+
 		status = "disabled";
 
 		pci@1,0 {
@@ -1158,6 +1164,7 @@
 
 	bpmp: bpmp {
 		compatible = "nvidia,tegra186-bpmp";
+		iommus = <&smmu TEGRA186_SID_BPMP>;
 		mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB
 				    TEGRA_HSP_DB_MASTER_BPMP>;
 		shmem = <&cpu_bpmp_tx &cpu_bpmp_rx>;
diff --git a/arch/arm64/boot/dts/sprd/whale2.dtsi b/arch/arm64/boot/dts/sprd/whale2.dtsi
index eb6be56..4bb862c 100644
--- a/arch/arm64/boot/dts/sprd/whale2.dtsi
+++ b/arch/arm64/boot/dts/sprd/whale2.dtsi
@@ -75,7 +75,9 @@
 					     "sprd,sc9836-uart";
 				reg = <0x0 0x100>;
 				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&ext_26m>;
+				clock-names = "enable", "uart", "source";
+				clocks = <&apapb_gate CLK_UART0_EB>,
+				       <&ap_clk CLK_UART0>, <&ext_26m>;
 				status = "disabled";
 			};
 
@@ -84,7 +86,9 @@
 					     "sprd,sc9836-uart";
 				reg = <0x100000 0x100>;
 				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&ext_26m>;
+				clock-names = "enable", "uart", "source";
+				clocks = <&apapb_gate CLK_UART1_EB>,
+				       <&ap_clk CLK_UART1>, <&ext_26m>;
 				status = "disabled";
 			};
 
@@ -93,7 +97,9 @@
 					     "sprd,sc9836-uart";
 				reg = <0x200000 0x100>;
 				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&ext_26m>;
+				clock-names = "enable", "uart", "source";
+				clocks = <&apapb_gate CLK_UART2_EB>,
+				       <&ap_clk CLK_UART2>, <&ext_26m>;
 				status = "disabled";
 			};
 
@@ -102,7 +108,9 @@
 					     "sprd,sc9836-uart";
 				reg = <0x300000 0x100>;
 				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&ext_26m>;
+				clock-names = "enable", "uart", "source";
+				clocks = <&apapb_gate CLK_UART3_EB>,
+				       <&ap_clk CLK_UART3>, <&ext_26m>;
 				status = "disabled";
 			};
 		};
diff --git a/drivers/amba/tegra-ahb.c b/drivers/amba/tegra-ahb.c
index b0b688c..3751d81 100644
--- a/drivers/amba/tegra-ahb.c
+++ b/drivers/amba/tegra-ahb.c
@@ -170,8 +170,7 @@
 EXPORT_SYMBOL(tegra_ahb_enable_smmu);
 #endif
 
-#ifdef CONFIG_PM
-static int tegra_ahb_suspend(struct device *dev)
+static int __maybe_unused tegra_ahb_suspend(struct device *dev)
 {
 	int i;
 	struct tegra_ahb *ahb = dev_get_drvdata(dev);
@@ -181,7 +180,7 @@
 	return 0;
 }
 
-static int tegra_ahb_resume(struct device *dev)
+static int __maybe_unused tegra_ahb_resume(struct device *dev)
 {
 	int i;
 	struct tegra_ahb *ahb = dev_get_drvdata(dev);
@@ -190,7 +189,6 @@
 		gizmo_writel(ahb, ahb->ctx[i], tegra_ahb_gizmo[i]);
 	return 0;
 }
-#endif
 
 static UNIVERSAL_DEV_PM_OPS(tegra_ahb_pm,
 			    tegra_ahb_suspend,
diff --git a/drivers/soc/fsl/qe/gpio.c b/drivers/soc/fsl/qe/gpio.c
index 819bed0..51b3a47 100644
--- a/drivers/soc/fsl/qe/gpio.c
+++ b/drivers/soc/fsl/qe/gpio.c
@@ -179,8 +179,10 @@
 	if (err < 0)
 		goto err0;
 	gc = gpio_to_chip(err);
-	if (WARN_ON(!gc))
+	if (WARN_ON(!gc)) {
+		err = -ENODEV;
 		goto err0;
+	}
 
 	if (!of_device_is_compatible(gc->of_node, "fsl,mpc8323-qe-pario-bank")) {
 		pr_debug("%s: tried to get a non-qe pin\n", __func__);
diff --git a/drivers/soc/ixp4xx/ixp4xx-qmgr.c b/drivers/soc/ixp4xx/ixp4xx-qmgr.c
index 13a8a13..bb90670 100644
--- a/drivers/soc/ixp4xx/ixp4xx-qmgr.c
+++ b/drivers/soc/ixp4xx/ixp4xx-qmgr.c
@@ -385,8 +385,8 @@
 	if (!res)
 		return -ENODEV;
 	qmgr_regs = devm_ioremap_resource(dev, res);
-	if (!qmgr_regs)
-		return -ENOMEM;
+	if (IS_ERR(qmgr_regs))
+		return PTR_ERR(qmgr_regs);
 
 	irq1 = platform_get_irq(pdev, 0);
 	if (irq1 <= 0)
diff --git a/include/linux/clk/at91_pmc.h b/include/linux/clk/at91_pmc.h
index 0c53f26..44e8fc3 100644
--- a/include/linux/clk/at91_pmc.h
+++ b/include/linux/clk/at91_pmc.h
@@ -161,6 +161,7 @@
 
 #define AT91_PMC_FSMR		0x70		/* Fast Startup Mode Register */
 #define AT91_PMC_FSTT(n)	BIT(n)
+#define AT91_PMC_RTTAL		BIT(16)
 #define AT91_PMC_RTCAL		BIT(17)		/* RTC Alarm Enable */
 #define AT91_PMC_USBAL		BIT(18)		/* USB Resume Enable */
 #define AT91_PMC_SDMMC_CD	BIT(19)		/* SDMMC Card Detect Enable */