Merge tag 'pm+acpi-3.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull more ACPI and power management updates from Rafael Wysocki:
 "These are a couple of regression fixes, cpuidle menu governor
  optimizations, fixes for ACPI proccessor and battery drivers,
  hibernation fix to avoid problems related to the e820 memory map,
  fixes for a few cpufreq drivers and a new version of the suspend
  profiling tool analyze_suspend.py.

  Specifics:

   - Fix for an ACPI-based device hotplug regression introduced in 3.14
     that causes a kernel panic to trigger when memory hot-remove is
     attempted with CONFIG_ACPI_HOTPLUG_MEMORY unset from Tang Chen

   - Fix for a cpufreq regression introduced in 3.16 that triggers a
     "sleeping function called from invalid context" bug in
     dev_pm_opp_init_cpufreq_table() from Stephen Boyd

   - ACPI battery driver fix for a warning message added in 3.16 that
     prints silly stuff sometimes from Mariusz Ceier

   - Hibernation fix for safer handling of mismatches in the 820 memory
     map between the configurations during image creation and during the
     subsequent restore from Chun-Yi Lee

   - ACPI processor driver fix to handle CPU hotplug notifications
     correctly during system suspend/resume from Lan Tianyu

   - Series of four cpuidle menu governor cleanups that also should
     speed it up a bit from Mel Gorman

   - Fixes for the speedstep-smi, integrator, cpu0 and arm_big_little
     cpufreq drivers from Hans Wennborg, Himangi Saraogi, Markus
     Pargmann and Uwe Kleine-K├Ânig

   - Version 3.0 of the analyze_suspend.py suspend profiling tool from
     Todd E Brandt"

* tag 'pm+acpi-3.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / battery: Fix warning message in acpi_battery_get_state()
  PM / tools: analyze_suspend.py: update to v3.0
  cpufreq: arm_big_little: fix module license spec
  cpufreq: speedstep-smi: fix decimal printf specifiers
  ACPI / hotplug: Check scan handlers in acpi_scan_hot_remove()
  cpufreq: OPP: Avoid sleeping while atomic
  cpufreq: cpu0: Do not print error message when deferring
  cpufreq: integrator: Use set_cpus_allowed_ptr
  PM / hibernate: avoid unsafe pages in e820 reserved regions
  ACPI / processor: Make acpi_cpu_soft_notify() process CPU FROZEN events
  cpuidle: menu: Lookup CPU runqueues less
  cpuidle: menu: Call nr_iowait_cpu less times
  cpuidle: menu: Use ktime_to_us instead of reinventing the wheel
  cpuidle: menu: Use shifts when calculating averages where possible
diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c
index 48bcf38..1c162e7 100644
--- a/drivers/acpi/battery.c
+++ b/drivers/acpi/battery.c
@@ -540,12 +540,12 @@
 	 */
 	if (battery->capacity_now > battery->full_charge_capacity
 	    && battery->full_charge_capacity != ACPI_BATTERY_VALUE_UNKNOWN) {
-		battery->capacity_now = battery->full_charge_capacity;
 		if (battery->capacity_now != battery->design_capacity)
 			printk_once(KERN_WARNING FW_BUG
 				"battery: reported current charge level (%d) "
 				"is higher than reported maximum charge level (%d).\n",
 				battery->capacity_now, battery->full_charge_capacity);
+		battery->capacity_now = battery->full_charge_capacity;
 	}
 
 	if (test_bit(ACPI_BATTERY_QUIRK_PERCENTAGE_CAPACITY, &battery->flags)
diff --git a/drivers/acpi/processor_driver.c b/drivers/acpi/processor_driver.c
index 4fcbd67..d9f7158 100644
--- a/drivers/acpi/processor_driver.c
+++ b/drivers/acpi/processor_driver.c
@@ -120,6 +120,7 @@
 	unsigned int cpu = (unsigned long)hcpu;
 	struct acpi_processor *pr = per_cpu(processors, cpu);
 	struct acpi_device *device;
+	action &= ~CPU_TASKS_FROZEN;
 
 	/*
 	 * CPU_STARTING and CPU_DYING must not sleep. Return here since
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index 5d592e1..0a817ad 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -353,7 +353,8 @@
 	unsigned long long sta;
 	acpi_status status;
 
-	if (device->handler->hotplug.demand_offline && !acpi_force_hot_remove) {
+	if (device->handler && device->handler->hotplug.demand_offline
+	    && !acpi_force_hot_remove) {
 		if (!acpi_scan_is_offline(device, true))
 			return -EBUSY;
 	} else {
diff --git a/drivers/cpufreq/arm_big_little.c b/drivers/cpufreq/arm_big_little.c
index 1f4d4e3..a46c223 100644
--- a/drivers/cpufreq/arm_big_little.c
+++ b/drivers/cpufreq/arm_big_little.c
@@ -24,6 +24,7 @@
 #include <linux/cpufreq.h>
 #include <linux/cpumask.h>
 #include <linux/export.h>
+#include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/of_platform.h>
 #include <linux/pm_opp.h>
@@ -593,3 +594,7 @@
 	arm_bL_ops = NULL;
 }
 EXPORT_SYMBOL_GPL(bL_cpufreq_unregister);
+
+MODULE_AUTHOR("Viresh Kumar <viresh.kumar@linaro.org>");
+MODULE_DESCRIPTION("Generic ARM big LITTLE cpufreq driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/cpufreq/arm_big_little_dt.c b/drivers/cpufreq/arm_big_little_dt.c
index 8d9d591..4550f69 100644
--- a/drivers/cpufreq/arm_big_little_dt.c
+++ b/drivers/cpufreq/arm_big_little_dt.c
@@ -114,4 +114,4 @@
 
 MODULE_AUTHOR("Viresh Kumar <viresh.kumar@linaro.org>");
 MODULE_DESCRIPTION("Generic ARM big LITTLE cpufreq driver via DT");
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/cpufreq/cpufreq-cpu0.c b/drivers/cpufreq/cpufreq-cpu0.c
index 86beda9..0d2172b 100644
--- a/drivers/cpufreq/cpufreq-cpu0.c
+++ b/drivers/cpufreq/cpufreq-cpu0.c
@@ -137,7 +137,7 @@
 		 * not yet registered, we should try defering probe.
 		 */
 		if (PTR_ERR(cpu_reg) == -EPROBE_DEFER) {
-			dev_err(cpu_dev, "cpu0 regulator not ready, retry\n");
+			dev_dbg(cpu_dev, "cpu0 regulator not ready, retry\n");
 			ret = -EPROBE_DEFER;
 			goto out_put_node;
 		}
diff --git a/drivers/cpufreq/cpufreq_opp.c b/drivers/cpufreq/cpufreq_opp.c
index c0c6f4a..f7a32d2 100644
--- a/drivers/cpufreq/cpufreq_opp.c
+++ b/drivers/cpufreq/cpufreq_opp.c
@@ -60,7 +60,7 @@
 		goto out;
 	}
 
-	freq_table = kzalloc(sizeof(*freq_table) * (max_opps + 1), GFP_KERNEL);
+	freq_table = kcalloc(sizeof(*freq_table), (max_opps + 1), GFP_ATOMIC);
 	if (!freq_table) {
 		ret = -ENOMEM;
 		goto out;
diff --git a/drivers/cpufreq/integrator-cpufreq.c b/drivers/cpufreq/integrator-cpufreq.c
index e5122f1..c132052 100644
--- a/drivers/cpufreq/integrator-cpufreq.c
+++ b/drivers/cpufreq/integrator-cpufreq.c
@@ -92,7 +92,7 @@
 	 * Bind to the specified CPU.  When this call returns,
 	 * we should be running on the right CPU.
 	 */
-	set_cpus_allowed(current, cpumask_of_cpu(cpu));
+	set_cpus_allowed_ptr(current, cpumask_of(cpu));
 	BUG_ON(cpu != smp_processor_id());
 
 	/* get current setting */
@@ -118,7 +118,7 @@
 	freqs.new = icst_hz(&cclk_params, vco) / 1000;
 
 	if (freqs.old == freqs.new) {
-		set_cpus_allowed(current, cpus_allowed);
+		set_cpus_allowed_ptr(current, &cpus_allowed);
 		return 0;
 	}
 
@@ -141,7 +141,7 @@
 	/*
 	 * Restore the CPUs allowed mask.
 	 */
-	set_cpus_allowed(current, cpus_allowed);
+	set_cpus_allowed_ptr(current, &cpus_allowed);
 
 	cpufreq_freq_transition_end(policy, &freqs, 0);
 
@@ -157,7 +157,7 @@
 
 	cpus_allowed = current->cpus_allowed;
 
-	set_cpus_allowed(current, cpumask_of_cpu(cpu));
+	set_cpus_allowed_ptr(current, cpumask_of(cpu));
 	BUG_ON(cpu != smp_processor_id());
 
 	/* detect memory etc. */
@@ -173,7 +173,7 @@
 
 	current_freq = icst_hz(&cclk_params, vco) / 1000; /* current freq */
 
-	set_cpus_allowed(current, cpus_allowed);
+	set_cpus_allowed_ptr(current, &cpus_allowed);
 
 	return current_freq;
 }
diff --git a/drivers/cpufreq/speedstep-smi.c b/drivers/cpufreq/speedstep-smi.c
index 8635eec..5fc96d5 100644
--- a/drivers/cpufreq/speedstep-smi.c
+++ b/drivers/cpufreq/speedstep-smi.c
@@ -324,8 +324,8 @@
 		return -ENODEV;
 	}
 
-	pr_debug("signature:0x%.8ulx, command:0x%.8ulx, "
-		"event:0x%.8ulx, perf_level:0x%.8ulx.\n",
+	pr_debug("signature:0x%.8x, command:0x%.8x, "
+		"event:0x%.8x, perf_level:0x%.8x.\n",
 		ist_info.signature, ist_info.command,
 		ist_info.event, ist_info.perf_level);
 
diff --git a/drivers/cpuidle/governors/menu.c b/drivers/cpuidle/governors/menu.c
index ae5a425..34db2fb 100644
--- a/drivers/cpuidle/governors/menu.c
+++ b/drivers/cpuidle/governors/menu.c
@@ -31,7 +31,8 @@
  * The default values do not overflow.
  */
 #define BUCKETS 12
-#define INTERVALS 8
+#define INTERVAL_SHIFT 3
+#define INTERVALS (1UL << INTERVAL_SHIFT)
 #define RESOLUTION 1024
 #define DECAY 8
 #define MAX_INTERESTING 50000
@@ -133,15 +134,12 @@
 #define LOAD_INT(x) ((x) >> FSHIFT)
 #define LOAD_FRAC(x) LOAD_INT(((x) & (FIXED_1-1)) * 100)
 
-static int get_loadavg(void)
+static inline int get_loadavg(unsigned long load)
 {
-	unsigned long this = this_cpu_load();
-
-
-	return LOAD_INT(this) * 10 + LOAD_FRAC(this) / 10;
+	return LOAD_INT(load) * 10 + LOAD_FRAC(load) / 10;
 }
 
-static inline int which_bucket(unsigned int duration)
+static inline int which_bucket(unsigned int duration, unsigned long nr_iowaiters)
 {
 	int bucket = 0;
 
@@ -151,7 +149,7 @@
 	 * This allows us to calculate
 	 * E(duration)|iowait
 	 */
-	if (nr_iowait_cpu(smp_processor_id()))
+	if (nr_iowaiters)
 		bucket = BUCKETS/2;
 
 	if (duration < 10)
@@ -174,16 +172,16 @@
  * to be, the higher this multiplier, and thus the higher
  * the barrier to go to an expensive C state.
  */
-static inline int performance_multiplier(void)
+static inline int performance_multiplier(unsigned long nr_iowaiters, unsigned long load)
 {
 	int mult = 1;
 
 	/* for higher loadavg, we are more reluctant */
 
-	mult += 2 * get_loadavg();
+	mult += 2 * get_loadavg(load);
 
 	/* for IO wait tasks (per cpu!) we add 5x each */
-	mult += 10 * nr_iowait_cpu(smp_processor_id());
+	mult += 10 * nr_iowaiters;
 
 	return mult;
 }
@@ -227,7 +225,10 @@
 				max = value;
 		}
 	}
-	do_div(avg, divisor);
+	if (divisor == INTERVALS)
+		avg >>= INTERVAL_SHIFT;
+	else
+		do_div(avg, divisor);
 
 	/* Then try to determine standard deviation */
 	stddev = 0;
@@ -238,7 +239,11 @@
 			stddev += diff * diff;
 		}
 	}
-	do_div(stddev, divisor);
+	if (divisor == INTERVALS)
+		stddev >>= INTERVAL_SHIFT;
+	else
+		do_div(stddev, divisor);
+
 	/*
 	 * The typical interval is obtained when standard deviation is small
 	 * or standard deviation is small compared to the average interval.
@@ -288,7 +293,7 @@
 	int latency_req = pm_qos_request(PM_QOS_CPU_DMA_LATENCY);
 	int i;
 	unsigned int interactivity_req;
-	struct timespec t;
+	unsigned long nr_iowaiters, cpu_load;
 
 	if (data->needs_update) {
 		menu_update(drv, dev);
@@ -302,12 +307,10 @@
 		return 0;
 
 	/* determine the expected residency time, round up */
-	t = ktime_to_timespec(tick_nohz_get_sleep_length());
-	data->next_timer_us =
-		t.tv_sec * USEC_PER_SEC + t.tv_nsec / NSEC_PER_USEC;
+	data->next_timer_us = ktime_to_us(tick_nohz_get_sleep_length());
 
-
-	data->bucket = which_bucket(data->next_timer_us);
+	get_iowait_load(&nr_iowaiters, &cpu_load);
+	data->bucket = which_bucket(data->next_timer_us, nr_iowaiters);
 
 	/*
 	 * Force the result of multiplication to be 64 bits even if both
@@ -325,7 +328,7 @@
 	 * duration / latency ratio. Adjust the latency limit if
 	 * necessary.
 	 */
-	interactivity_req = data->predicted_us / performance_multiplier();
+	interactivity_req = data->predicted_us / performance_multiplier(nr_iowaiters, cpu_load);
 	if (latency_req > interactivity_req)
 		latency_req = interactivity_req;
 
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 857ba40..5c2c885 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -169,8 +169,7 @@
 extern unsigned long nr_running(void);
 extern unsigned long nr_iowait(void);
 extern unsigned long nr_iowait_cpu(int cpu);
-extern unsigned long this_cpu_load(void);
-
+extern void get_iowait_load(unsigned long *nr_waiters, unsigned long *load);
 
 extern void calc_global_load(unsigned long ticks);
 extern void update_cpu_load_nohz(void);
diff --git a/kernel/power/snapshot.c b/kernel/power/snapshot.c
index 4fc5c32..c4b8093 100644
--- a/kernel/power/snapshot.c
+++ b/kernel/power/snapshot.c
@@ -954,6 +954,25 @@
 	}
 }
 
+static bool is_nosave_page(unsigned long pfn)
+{
+	struct nosave_region *region;
+
+	list_for_each_entry(region, &nosave_regions, list) {
+		if (pfn >= region->start_pfn && pfn < region->end_pfn) {
+			pr_err("PM: %#010llx in e820 nosave region: "
+			       "[mem %#010llx-%#010llx]\n",
+			       (unsigned long long) pfn << PAGE_SHIFT,
+			       (unsigned long long) region->start_pfn << PAGE_SHIFT,
+			       ((unsigned long long) region->end_pfn << PAGE_SHIFT)
+					- 1);
+			return true;
+		}
+	}
+
+	return false;
+}
+
 /**
  *	create_basic_memory_bitmaps - create bitmaps needed for marking page
  *	frames that should not be saved and free page frames.  The pointers
@@ -2015,7 +2034,7 @@
 	do {
 		pfn = memory_bm_next_pfn(bm);
 		if (likely(pfn != BM_END_OF_MAP)) {
-			if (likely(pfn_valid(pfn)))
+			if (likely(pfn_valid(pfn)) && !is_nosave_page(pfn))
 				swsusp_set_page_free(pfn_to_page(pfn));
 			else
 				return -EFAULT;
diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index 1211575..ec1a286 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -2393,6 +2393,13 @@
 	return atomic_read(&this->nr_iowait);
 }
 
+void get_iowait_load(unsigned long *nr_waiters, unsigned long *load)
+{
+	struct rq *this = this_rq();
+	*nr_waiters = atomic_read(&this->nr_iowait);
+	*load = this->cpu_load[0];
+}
+
 #ifdef CONFIG_SMP
 
 /*
diff --git a/kernel/sched/proc.c b/kernel/sched/proc.c
index 16f5a30..8ecd552 100644
--- a/kernel/sched/proc.c
+++ b/kernel/sched/proc.c
@@ -8,13 +8,6 @@
 
 #include "sched.h"
 
-unsigned long this_cpu_load(void)
-{
-	struct rq *this = this_rq();
-	return this->cpu_load[0];
-}
-
-
 /*
  * Global load-average calculations
  *
diff --git a/scripts/analyze_suspend.py b/scripts/analyze_suspend.py
index 4f2cc12..93e1fd4 100755
--- a/scripts/analyze_suspend.py
+++ b/scripts/analyze_suspend.py
@@ -36,146 +36,392 @@
 #		 CONFIG_FUNCTION_TRACER=y
 #		 CONFIG_FUNCTION_GRAPH_TRACER=y
 #
+#	 For kernel versions older than 3.15:
 #	 The following additional kernel parameters are required:
 #		 (e.g. in file /etc/default/grub)
 #		 GRUB_CMDLINE_LINUX_DEFAULT="... initcall_debug log_buf_len=16M ..."
 #
 
+# ----------------- LIBRARIES --------------------
+
 import sys
 import time
 import os
 import string
 import re
-import array
 import platform
-import datetime
+from datetime import datetime
 import struct
 
-# -- classes --
+# ----------------- CLASSES --------------------
 
+# Class: SystemValues
+# Description:
+#	 A global, single-instance container used to
+#	 store system values and test parameters
 class SystemValues:
-	testdir = "."
-	tpath = "/sys/kernel/debug/tracing/"
-	mempath = "/dev/mem"
-	powerfile = "/sys/power/state"
-	suspendmode = "mem"
-	prefix = "test"
-	teststamp = ""
-	dmesgfile = ""
-	ftracefile = ""
-	htmlfile = ""
-	rtcwake = False
-	def setOutputFile(self):
-		if((self.htmlfile == "") and (self.dmesgfile != "")):
-			m = re.match(r"(?P<name>.*)_dmesg\.txt$", self.dmesgfile)
-			if(m):
-				self.htmlfile = m.group("name")+".html"
-		if((self.htmlfile == "") and (self.ftracefile != "")):
-			m = re.match(r"(?P<name>.*)_ftrace\.txt$", self.ftracefile)
-			if(m):
-				self.htmlfile = m.group("name")+".html"
-		if(self.htmlfile == ""):
-			self.htmlfile = "output.html"
-	def initTestOutput(self):
-		hostname = platform.node()
-		if(hostname != ""):
-			self.prefix = hostname
-		v = os.popen("cat /proc/version").read().strip()
-		kver = string.split(v)[2]
-		self.testdir = os.popen("date \"+suspend-%m%d%y-%H%M%S\"").read().strip()
-		self.teststamp = "# "+self.testdir+" "+self.prefix+" "+self.suspendmode+" "+kver
-		self.dmesgfile = self.testdir+"/"+self.prefix+"_"+self.suspendmode+"_dmesg.txt"
-		self.ftracefile = self.testdir+"/"+self.prefix+"_"+self.suspendmode+"_ftrace.txt"
-		self.htmlfile = self.testdir+"/"+self.prefix+"_"+self.suspendmode+".html"
-		os.mkdir(self.testdir)
-
-class Data:
-	altdevname = dict()
-	usedmesg = False
-	useftrace = False
-	notestrun = False
+	version = 3.0
 	verbose = False
-	phases = []
-	dmesg = {} # root data structure
-	start = 0.0
-	end = 0.0
-	stamp = {'time': "", 'host': "", 'mode': ""}
-	id = 0
-	tSuspended = 0.0
-	fwValid = False
-	fwSuspend = 0
-	fwResume = 0
-	def initialize(self):
-		self.dmesg = { # dmesg log data
-			'suspend_general': {'list': dict(), 'start': -1.0, 'end': -1.0,
-								'row': 0, 'color': "#CCFFCC", 'order': 0},
-			  'suspend_early': {'list': dict(), 'start': -1.0, 'end': -1.0,
-								'row': 0, 'color': "green", 'order': 1},
+	testdir = '.'
+	tpath = '/sys/kernel/debug/tracing/'
+	fpdtpath = '/sys/firmware/acpi/tables/FPDT'
+	epath = '/sys/kernel/debug/tracing/events/power/'
+	traceevents = [
+		'suspend_resume',
+		'device_pm_callback_end',
+		'device_pm_callback_start'
+	]
+	modename = {
+		'freeze': 'Suspend-To-Idle (S0)',
+		'standby': 'Power-On Suspend (S1)',
+		'mem': 'Suspend-to-RAM (S3)',
+		'disk': 'Suspend-to-disk (S4)'
+	}
+	mempath = '/dev/mem'
+	powerfile = '/sys/power/state'
+	suspendmode = 'mem'
+	hostname = 'localhost'
+	prefix = 'test'
+	teststamp = ''
+	dmesgfile = ''
+	ftracefile = ''
+	htmlfile = ''
+	rtcwake = False
+	rtcwaketime = 10
+	rtcpath = ''
+	android = False
+	adb = 'adb'
+	devicefilter = []
+	stamp = 0
+	execcount = 1
+	x2delay = 0
+	usecallgraph = False
+	usetraceevents = False
+	usetraceeventsonly = False
+	notestrun = False
+	altdevname = dict()
+	postresumetime = 0
+	tracertypefmt = '# tracer: (?P<t>.*)'
+	firmwarefmt = '# fwsuspend (?P<s>[0-9]*) fwresume (?P<r>[0-9]*)$'
+	postresumefmt = '# post resume time (?P<t>[0-9]*)$'
+	stampfmt = '# suspend-(?P<m>[0-9]{2})(?P<d>[0-9]{2})(?P<y>[0-9]{2})-'+\
+				'(?P<H>[0-9]{2})(?P<M>[0-9]{2})(?P<S>[0-9]{2})'+\
+				' (?P<host>.*) (?P<mode>.*) (?P<kernel>.*)$'
+	def __init__(self):
+		self.hostname = platform.node()
+		if(self.hostname == ''):
+			self.hostname = 'localhost'
+		rtc = "rtc0"
+		if os.path.exists('/dev/rtc'):
+			rtc = os.readlink('/dev/rtc')
+		rtc = '/sys/class/rtc/'+rtc
+		if os.path.exists(rtc) and os.path.exists(rtc+'/date') and \
+			os.path.exists(rtc+'/time') and os.path.exists(rtc+'/wakealarm'):
+			self.rtcpath = rtc
+	def setOutputFile(self):
+		if((self.htmlfile == '') and (self.dmesgfile != '')):
+			m = re.match('(?P<name>.*)_dmesg\.txt$', self.dmesgfile)
+			if(m):
+				self.htmlfile = m.group('name')+'.html'
+		if((self.htmlfile == '') and (self.ftracefile != '')):
+			m = re.match('(?P<name>.*)_ftrace\.txt$', self.ftracefile)
+			if(m):
+				self.htmlfile = m.group('name')+'.html'
+		if(self.htmlfile == ''):
+			self.htmlfile = 'output.html'
+	def initTestOutput(self, subdir):
+		if(not self.android):
+			self.prefix = self.hostname
+			v = open('/proc/version', 'r').read().strip()
+			kver = string.split(v)[2]
+		else:
+			self.prefix = 'android'
+			v = os.popen(self.adb+' shell cat /proc/version').read().strip()
+			kver = string.split(v)[2]
+		testtime = datetime.now().strftime('suspend-%m%d%y-%H%M%S')
+		if(subdir != "."):
+			self.testdir = subdir+"/"+testtime
+		else:
+			self.testdir = testtime
+		self.teststamp = \
+			'# '+testtime+' '+self.prefix+' '+self.suspendmode+' '+kver
+		self.dmesgfile = \
+			self.testdir+'/'+self.prefix+'_'+self.suspendmode+'_dmesg.txt'
+		self.ftracefile = \
+			self.testdir+'/'+self.prefix+'_'+self.suspendmode+'_ftrace.txt'
+		self.htmlfile = \
+			self.testdir+'/'+self.prefix+'_'+self.suspendmode+'.html'
+		os.mkdir(self.testdir)
+	def setDeviceFilter(self, devnames):
+		self.devicefilter = string.split(devnames)
+	def rtcWakeAlarm(self):
+		os.system('echo 0 > '+self.rtcpath+'/wakealarm')
+		outD = open(self.rtcpath+'/date', 'r').read().strip()
+		outT = open(self.rtcpath+'/time', 'r').read().strip()
+		mD = re.match('^(?P<y>[0-9]*)-(?P<m>[0-9]*)-(?P<d>[0-9]*)', outD)
+		mT = re.match('^(?P<h>[0-9]*):(?P<m>[0-9]*):(?P<s>[0-9]*)', outT)
+		if(mD and mT):
+			# get the current time from hardware
+			utcoffset = int((datetime.now() - datetime.utcnow()).total_seconds())
+			dt = datetime(\
+				int(mD.group('y')), int(mD.group('m')), int(mD.group('d')),
+				int(mT.group('h')), int(mT.group('m')), int(mT.group('s')))
+			nowtime = int(dt.strftime('%s')) + utcoffset
+		else:
+			# if hardware time fails, use the software time
+			nowtime = int(datetime.now().strftime('%s'))
+		alarm = nowtime + self.rtcwaketime
+		os.system('echo %d > %s/wakealarm' % (alarm, self.rtcpath))
+
+sysvals = SystemValues()
+
+# Class: DeviceNode
+# Description:
+#	 A container used to create a device hierachy, with a single root node
+#	 and a tree of child nodes. Used by Data.deviceTopology()
+class DeviceNode:
+	name = ''
+	children = 0
+	depth = 0
+	def __init__(self, nodename, nodedepth):
+		self.name = nodename
+		self.children = []
+		self.depth = nodedepth
+
+# Class: Data
+# Description:
+#	 The primary container for suspend/resume test data. There is one for
+#	 each test run. The data is organized into a cronological hierarchy:
+#	 Data.dmesg {
+#		root structure, started as dmesg & ftrace, but now only ftrace
+#		contents: times for suspend start/end, resume start/end, fwdata
+#		phases {
+#			10 sequential, non-overlapping phases of S/R
+#			contents: times for phase start/end, order/color data for html
+#			devlist {
+#				device callback or action list for this phase
+#				device {
+#					a single device callback or generic action
+#					contents: start/stop times, pid/cpu/driver info
+#						parents/children, html id for timeline/callgraph
+#						optionally includes an ftrace callgraph
+#						optionally includes intradev trace events
+#				}
+#			}
+#		}
+#	}
+#
+class Data:
+	dmesg = {}  # root data structure
+	phases = [] # ordered list of phases
+	start = 0.0 # test start
+	end = 0.0   # test end
+	tSuspended = 0.0 # low-level suspend start
+	tResumed = 0.0   # low-level resume start
+	tLow = 0.0       # time spent in low-level suspend (standby/freeze)
+	fwValid = False  # is firmware data available
+	fwSuspend = 0    # time spent in firmware suspend
+	fwResume = 0     # time spent in firmware resume
+	dmesgtext = []   # dmesg text file in memory
+	testnumber = 0
+	idstr = ''
+	html_device_id = 0
+	stamp = 0
+	outfile = ''
+	def __init__(self, num):
+		idchar = 'abcdefghijklmnopqrstuvwxyz'
+		self.testnumber = num
+		self.idstr = idchar[num]
+		self.dmesgtext = []
+		self.phases = []
+		self.dmesg = { # fixed list of 10 phases
+			'suspend_prepare': {'list': dict(), 'start': -1.0, 'end': -1.0,
+								'row': 0, 'color': '#CCFFCC', 'order': 0},
+			        'suspend': {'list': dict(), 'start': -1.0, 'end': -1.0,
+								'row': 0, 'color': '#88FF88', 'order': 1},
+			   'suspend_late': {'list': dict(), 'start': -1.0, 'end': -1.0,
+								'row': 0, 'color': '#00AA00', 'order': 2},
 			  'suspend_noirq': {'list': dict(), 'start': -1.0, 'end': -1.0,
-								'row': 0, 'color': "#00FFFF", 'order': 2},
-				'suspend_cpu': {'list': dict(), 'start': -1.0, 'end': -1.0,
-								'row': 0, 'color': "blue", 'order': 3},
-				 'resume_cpu': {'list': dict(), 'start': -1.0, 'end': -1.0,
-								'row': 0, 'color': "red", 'order': 4},
+								'row': 0, 'color': '#008888', 'order': 3},
+		    'suspend_machine': {'list': dict(), 'start': -1.0, 'end': -1.0,
+								'row': 0, 'color': '#0000FF', 'order': 4},
+			 'resume_machine': {'list': dict(), 'start': -1.0, 'end': -1.0,
+								'row': 0, 'color': '#FF0000', 'order': 5},
 			   'resume_noirq': {'list': dict(), 'start': -1.0, 'end': -1.0,
-								'row': 0, 'color': "orange", 'order': 5},
+								'row': 0, 'color': '#FF9900', 'order': 6},
 			   'resume_early': {'list': dict(), 'start': -1.0, 'end': -1.0,
-								'row': 0, 'color': "yellow", 'order': 6},
-			 'resume_general': {'list': dict(), 'start': -1.0, 'end': -1.0,
-								'row': 0, 'color': "#FFFFCC", 'order': 7}
+								'row': 0, 'color': '#FFCC00', 'order': 7},
+			         'resume': {'list': dict(), 'start': -1.0, 'end': -1.0,
+								'row': 0, 'color': '#FFFF88', 'order': 8},
+			'resume_complete': {'list': dict(), 'start': -1.0, 'end': -1.0,
+								'row': 0, 'color': '#FFFFCC', 'order': 9}
 		}
 		self.phases = self.sortedPhases()
-	def normalizeTime(self):
-		tSus = tRes = self.tSuspended
-		if self.fwValid:
-			tSus -= -self.fwSuspend / 1000000000.0
-			tRes -= self.fwResume / 1000000000.0
-		self.tSuspended = 0.0
-		self.start -= tSus
-		self.end -= tRes
+	def getStart(self):
+		return self.dmesg[self.phases[0]]['start']
+	def setStart(self, time):
+		self.start = time
+		self.dmesg[self.phases[0]]['start'] = time
+	def getEnd(self):
+		return self.dmesg[self.phases[-1]]['end']
+	def setEnd(self, time):
+		self.end = time
+		self.dmesg[self.phases[-1]]['end'] = time
+	def isTraceEventOutsideDeviceCalls(self, pid, time):
 		for phase in self.phases:
-			zero = tRes
-			if "suspend" in phase:
-				zero = tSus
+			list = self.dmesg[phase]['list']
+			for dev in list:
+				d = list[dev]
+				if(d['pid'] == pid and time >= d['start'] and
+					time <= d['end']):
+					return False
+		return True
+	def addIntraDevTraceEvent(self, action, name, pid, time):
+		if(action == 'mutex_lock_try'):
+			color = 'red'
+		elif(action == 'mutex_lock_pass'):
+			color = 'green'
+		elif(action == 'mutex_unlock'):
+			color = 'blue'
+		else:
+			# create separate colors based on the name
+			v1 = len(name)*10 % 256
+			v2 = string.count(name, 'e')*100 % 256
+			v3 = ord(name[0])*20 % 256
+			color = '#%06X' % ((v1*0x10000) + (v2*0x100) + v3)
+		for phase in self.phases:
+			list = self.dmesg[phase]['list']
+			for dev in list:
+				d = list[dev]
+				if(d['pid'] == pid and time >= d['start'] and
+					time <= d['end']):
+					e = TraceEvent(action, name, color, time)
+					if('traceevents' not in d):
+						d['traceevents'] = []
+					d['traceevents'].append(e)
+					return d
+					break
+		return 0
+	def capIntraDevTraceEvent(self, action, name, pid, time):
+		for phase in self.phases:
+			list = self.dmesg[phase]['list']
+			for dev in list:
+				d = list[dev]
+				if(d['pid'] == pid and time >= d['start'] and
+					time <= d['end']):
+					if('traceevents' not in d):
+						return
+					for e in d['traceevents']:
+						if(e.action == action and
+							e.name == name and not e.ready):
+							e.length = time - e.time
+							e.ready = True
+							break
+					return
+	def trimTimeVal(self, t, t0, dT, left):
+		if left:
+			if(t > t0):
+				if(t - dT < t0):
+					return t0
+				return t - dT
+			else:
+				return t
+		else:
+			if(t < t0 + dT):
+				if(t > t0):
+					return t0 + dT
+				return t + dT
+			else:
+				return t
+	def trimTime(self, t0, dT, left):
+		self.tSuspended = self.trimTimeVal(self.tSuspended, t0, dT, left)
+		self.tResumed = self.trimTimeVal(self.tResumed, t0, dT, left)
+		self.start = self.trimTimeVal(self.start, t0, dT, left)
+		self.end = self.trimTimeVal(self.end, t0, dT, left)
+		for phase in self.phases:
 			p = self.dmesg[phase]
-			p['start'] -= zero
-			p['end'] -= zero
+			p['start'] = self.trimTimeVal(p['start'], t0, dT, left)
+			p['end'] = self.trimTimeVal(p['end'], t0, dT, left)
 			list = p['list']
 			for name in list:
 				d = list[name]
-				d['start'] -= zero
-				d['end'] -= zero
+				d['start'] = self.trimTimeVal(d['start'], t0, dT, left)
+				d['end'] = self.trimTimeVal(d['end'], t0, dT, left)
 				if('ftrace' in d):
 					cg = d['ftrace']
-					cg.start -= zero
-					cg.end -= zero
+					cg.start = self.trimTimeVal(cg.start, t0, dT, left)
+					cg.end = self.trimTimeVal(cg.end, t0, dT, left)
 					for line in cg.list:
-						line.time -= zero
-		if self.fwValid:
-			fws = -self.fwSuspend / 1000000000.0
-			fwr = self.fwResume / 1000000000.0
-			list = dict()
-			self.id += 1
-			devid = "dc%d" % self.id
-			list["firmware-suspend"] = \
-				{'start': fws, 'end': 0, 'pid': 0, 'par': "",
-				'length': -fws, 'row': 0, 'id': devid };
-			self.id += 1
-			devid = "dc%d" % self.id
-			list["firmware-resume"] = \
-				{'start': 0, 'end': fwr, 'pid': 0, 'par': "",
-				'length': fwr, 'row': 0, 'id': devid };
-			self.dmesg['BIOS'] = \
-				{'list': list, 'start': fws, 'end': fwr,
-				'row': 0, 'color': "purple", 'order': 4}
-			self.dmesg['resume_cpu']['order'] += 1
-			self.dmesg['resume_noirq']['order'] += 1
-			self.dmesg['resume_early']['order'] += 1
-			self.dmesg['resume_general']['order'] += 1
-			self.phases = self.sortedPhases()
-	def vprint(self, msg):
-		if(self.verbose):
-			print(msg)
+						line.time = self.trimTimeVal(line.time, t0, dT, left)
+				if('traceevents' in d):
+					for e in d['traceevents']:
+						e.time = self.trimTimeVal(e.time, t0, dT, left)
+	def normalizeTime(self, tZero):
+		# first trim out any standby or freeze clock time
+		if(self.tSuspended != self.tResumed):
+			if(self.tResumed > tZero):
+				self.trimTime(self.tSuspended, \
+					self.tResumed-self.tSuspended, True)
+			else:
+				self.trimTime(self.tSuspended, \
+					self.tResumed-self.tSuspended, False)
+		# shift the timeline so that tZero is the new 0
+		self.tSuspended -= tZero
+		self.tResumed -= tZero
+		self.start -= tZero
+		self.end -= tZero
+		for phase in self.phases:
+			p = self.dmesg[phase]
+			p['start'] -= tZero
+			p['end'] -= tZero
+			list = p['list']
+			for name in list:
+				d = list[name]
+				d['start'] -= tZero
+				d['end'] -= tZero
+				if('ftrace' in d):
+					cg = d['ftrace']
+					cg.start -= tZero
+					cg.end -= tZero
+					for line in cg.list:
+						line.time -= tZero
+				if('traceevents' in d):
+					for e in d['traceevents']:
+						e.time -= tZero
+	def newPhaseWithSingleAction(self, phasename, devname, start, end, color):
+		for phase in self.phases:
+			self.dmesg[phase]['order'] += 1
+		self.html_device_id += 1
+		devid = '%s%d' % (self.idstr, self.html_device_id)
+		list = dict()
+		list[devname] = \
+			{'start': start, 'end': end, 'pid': 0, 'par': '',
+			'length': (end-start), 'row': 0, 'id': devid, 'drv': '' };
+		self.dmesg[phasename] = \
+			{'list': list, 'start': start, 'end': end,
+			'row': 0, 'color': color, 'order': 0}
+		self.phases = self.sortedPhases()
+	def newPhase(self, phasename, start, end, color, order):
+		if(order < 0):
+			order = len(self.phases)
+		for phase in self.phases[order:]:
+			self.dmesg[phase]['order'] += 1
+		if(order > 0):
+			p = self.phases[order-1]
+			self.dmesg[p]['end'] = start
+		if(order < len(self.phases)):
+			p = self.phases[order]
+			self.dmesg[p]['start'] = end
+		list = dict()
+		self.dmesg[phasename] = \
+			{'list': list, 'start': start, 'end': end,
+			'row': 0, 'color': color, 'order': order}
+		self.phases = self.sortedPhases()
+	def setPhase(self, phase, ktime, isbegin):
+		if(isbegin):
+			self.dmesg[phase]['start'] = ktime
+		else:
+			self.dmesg[phase]['end'] = ktime
 	def dmesgSortVal(self, phase):
 		return self.dmesg[phase]['order']
 	def sortedPhases(self):
@@ -197,59 +443,180 @@
 			dev = phaselist[devname]
 			if(dev['end'] < 0):
 				dev['end'] = end
-				self.vprint("%s (%s): callback didn't return" % (devname, phase))
+				vprint('%s (%s): callback didnt return' % (devname, phase))
+	def deviceFilter(self, devicefilter):
+		# remove all by the relatives of the filter devnames
+		filter = []
+		for phase in self.phases:
+			list = self.dmesg[phase]['list']
+			for name in devicefilter:
+				dev = name
+				while(dev in list):
+					if(dev not in filter):
+						filter.append(dev)
+					dev = list[dev]['par']
+				children = self.deviceDescendants(name, phase)
+				for dev in children:
+					if(dev not in filter):
+						filter.append(dev)
+		for phase in self.phases:
+			list = self.dmesg[phase]['list']
+			rmlist = []
+			for name in list:
+				pid = list[name]['pid']
+				if(name not in filter and pid >= 0):
+					rmlist.append(name)
+			for name in rmlist:
+				del list[name]
 	def fixupInitcallsThatDidntReturn(self):
 		# if any calls never returned, clip them at system resume end
 		for phase in self.phases:
-			self.fixupInitcalls(phase, self.dmesg['resume_general']['end'])
-			if(phase == "resume_general"):
-				break
-	def newAction(self, phase, name, pid, parent, start, end):
-		self.id += 1
-		devid = "dc%d" % self.id
+			self.fixupInitcalls(phase, self.getEnd())
+	def newActionGlobal(self, name, start, end):
+		# which phase is this device callback or action "in"
+		targetphase = "none"
+		overlap = 0.0
+		for phase in self.phases:
+			pstart = self.dmesg[phase]['start']
+			pend = self.dmesg[phase]['end']
+			o = max(0, min(end, pend) - max(start, pstart))
+			if(o > overlap):
+				targetphase = phase
+				overlap = o
+		if targetphase in self.phases:
+			self.newAction(targetphase, name, -1, '', start, end, '')
+			return True
+		return False
+	def newAction(self, phase, name, pid, parent, start, end, drv):
+		# new device callback for a specific phase
+		self.html_device_id += 1
+		devid = '%s%d' % (self.idstr, self.html_device_id)
 		list = self.dmesg[phase]['list']
 		length = -1.0
 		if(start >= 0 and end >= 0):
 			length = end - start
 		list[name] = {'start': start, 'end': end, 'pid': pid, 'par': parent,
-					  'length': length, 'row': 0, 'id': devid }
+					  'length': length, 'row': 0, 'id': devid, 'drv': drv }
 	def deviceIDs(self, devlist, phase):
 		idlist = []
-		for p in self.phases:
-			if(p[0] != phase[0]):
-				continue
-			list = data.dmesg[p]['list']
-			for devname in list:
-				if devname in devlist:
-					idlist.append(list[devname]['id'])
+		list = self.dmesg[phase]['list']
+		for devname in list:
+			if devname in devlist:
+				idlist.append(list[devname]['id'])
 		return idlist
 	def deviceParentID(self, devname, phase):
-		pdev = ""
-		pdevid = ""
-		for p in self.phases:
-			if(p[0] != phase[0]):
-				continue
-			list = data.dmesg[p]['list']
-			if devname in list:
-				pdev = list[devname]['par']
-		for p in self.phases:
-			if(p[0] != phase[0]):
-				continue
-			list = data.dmesg[p]['list']
-			if pdev in list:
-				return list[pdev]['id']
+		pdev = ''
+		pdevid = ''
+		list = self.dmesg[phase]['list']
+		if devname in list:
+			pdev = list[devname]['par']
+		if pdev in list:
+			return list[pdev]['id']
 		return pdev
-	def deviceChildrenIDs(self, devname, phase):
+	def deviceChildren(self, devname, phase):
 		devlist = []
-		for p in self.phases:
-			if(p[0] != phase[0]):
-				continue
-			list = data.dmesg[p]['list']
-			for child in list:
-				if(list[child]['par'] == devname):
-					devlist.append(child)
+		list = self.dmesg[phase]['list']
+		for child in list:
+			if(list[child]['par'] == devname):
+				devlist.append(child)
+		return devlist
+	def deviceDescendants(self, devname, phase):
+		children = self.deviceChildren(devname, phase)
+		family = children
+		for child in children:
+			family += self.deviceDescendants(child, phase)
+		return family
+	def deviceChildrenIDs(self, devname, phase):
+		devlist = self.deviceChildren(devname, phase)
 		return self.deviceIDs(devlist, phase)
+	def printDetails(self):
+		vprint('          test start: %f' % self.start)
+		for phase in self.phases:
+			dc = len(self.dmesg[phase]['list'])
+			vprint('    %16s: %f - %f (%d devices)' % (phase, \
+				self.dmesg[phase]['start'], self.dmesg[phase]['end'], dc))
+		vprint('            test end: %f' % self.end)
+	def masterTopology(self, name, list, depth):
+		node = DeviceNode(name, depth)
+		for cname in list:
+			clist = self.deviceChildren(cname, 'resume')
+			cnode = self.masterTopology(cname, clist, depth+1)
+			node.children.append(cnode)
+		return node
+	def printTopology(self, node):
+		html = ''
+		if node.name:
+			info = ''
+			drv = ''
+			for phase in self.phases:
+				list = self.dmesg[phase]['list']
+				if node.name in list:
+					s = list[node.name]['start']
+					e = list[node.name]['end']
+					if list[node.name]['drv']:
+						drv = ' {'+list[node.name]['drv']+'}'
+					info += ('<li>%s: %.3fms</li>' % (phase, (e-s)*1000))
+			html += '<li><b>'+node.name+drv+'</b>'
+			if info:
+				html += '<ul>'+info+'</ul>'
+			html += '</li>'
+		if len(node.children) > 0:
+			html += '<ul>'
+			for cnode in node.children:
+				html += self.printTopology(cnode)
+			html += '</ul>'
+		return html
+	def rootDeviceList(self):
+		# list of devices graphed
+		real = []
+		for phase in self.dmesg:
+			list = self.dmesg[phase]['list']
+			for dev in list:
+				if list[dev]['pid'] >= 0 and dev not in real:
+					real.append(dev)
+		# list of top-most root devices
+		rootlist = []
+		for phase in self.dmesg:
+			list = self.dmesg[phase]['list']
+			for dev in list:
+				pdev = list[dev]['par']
+				if(re.match('[0-9]*-[0-9]*\.[0-9]*[\.0-9]*\:[\.0-9]*$', pdev)):
+					continue
+				if pdev and pdev not in real and pdev not in rootlist:
+					rootlist.append(pdev)
+		return rootlist
+	def deviceTopology(self):
+		rootlist = self.rootDeviceList()
+		master = self.masterTopology('', rootlist, 0)
+		return self.printTopology(master)
 
+# Class: TraceEvent
+# Description:
+#	 A container for trace event data found in the ftrace file
+class TraceEvent:
+	ready = False
+	name = ''
+	time = 0.0
+	color = '#FFFFFF'
+	length = 0.0
+	action = ''
+	def __init__(self, a, n, c, t):
+		self.action = a
+		self.name = n
+		self.color = c
+		self.time = t
+
+# Class: FTraceLine
+# Description:
+#	 A container for a single line of ftrace data. There are six basic types:
+#		 callgraph line:
+#			  call: "  dpm_run_callback() {"
+#			return: "  }"
+#			  leaf: " dpm_run_callback();"
+#		 trace event:
+#			 tracing_mark_write: SUSPEND START or RESUME COMPLETE
+#			 suspend_resume: phase or custom exec block data
+#			 device_pm_callback: device callback info
 class FTraceLine:
 	time = 0.0
 	length = 0.0
@@ -257,20 +624,33 @@
 	freturn = False
 	fevent = False
 	depth = 0
-	name = ""
+	name = ''
+	type = ''
 	def __init__(self, t, m, d):
 		self.time = float(t)
-		# check to see if this is a trace event
-		em = re.match(r"^ *\/\* *(?P<msg>.*) \*\/ *$", m)
-		if(em):
-			self.name = em.group("msg")
+		# is this a trace event
+		if(d == 'traceevent' or re.match('^ *\/\* *(?P<msg>.*) \*\/ *$', m)):
+			if(d == 'traceevent'):
+				# nop format trace event
+				msg = m
+			else:
+				# function_graph format trace event
+				em = re.match('^ *\/\* *(?P<msg>.*) \*\/ *$', m)
+				msg = em.group('msg')
+
+			emm = re.match('^(?P<call>.*?): (?P<msg>.*)', msg)
+			if(emm):
+				self.name = emm.group('msg')
+				self.type = emm.group('call')
+			else:
+				self.name = msg
 			self.fevent = True
 			return
 		# convert the duration to seconds
 		if(d):
 			self.length = float(d)/1000000
 		# the indentation determines the depth
-		match = re.match(r"^(?P<d> *)(?P<o>.*)$", m)
+		match = re.match('^(?P<d> *)(?P<o>.*)$', m)
 		if(not match):
 			return
 		self.depth = self.getDepth(match.group('d'))
@@ -280,7 +660,7 @@
 			self.freturn = True
 			if(len(m) > 1):
 				# includes comment with function name
-				match = re.match(r"^} *\/\* *(?P<n>.*) *\*\/$", m)
+				match = re.match('^} *\/\* *(?P<n>.*) *\*\/$', m)
 				if(match):
 					self.name = match.group('n')
 		# function call
@@ -288,13 +668,13 @@
 			self.fcall = True
 			# function call with children
 			if(m[-1] == '{'):
-				match = re.match(r"^(?P<n>.*) *\(.*", m)
+				match = re.match('^(?P<n>.*) *\(.*', m)
 				if(match):
 					self.name = match.group('n')
 			# function call with no children (leaf)
 			elif(m[-1] == ';'):
 				self.freturn = True
-				match = re.match(r"^(?P<n>.*) *\(.*", m)
+				match = re.match('^(?P<n>.*) *\(.*', m)
 				if(match):
 					self.name = match.group('n')
 			# something else (possibly a trace marker)
@@ -302,7 +682,23 @@
 				self.name = m
 	def getDepth(self, str):
 		return len(str)/2
+	def debugPrint(self, dev):
+		if(self.freturn and self.fcall):
+			print('%s -- %f (%02d): %s(); (%.3f us)' % (dev, self.time, \
+				self.depth, self.name, self.length*1000000))
+		elif(self.freturn):
+			print('%s -- %f (%02d): %s} (%.3f us)' % (dev, self.time, \
+				self.depth, self.name, self.length*1000000))
+		else:
+			print('%s -- %f (%02d): %s() { (%.3f us)' % (dev, self.time, \
+				self.depth, self.name, self.length*1000000))
 
+# Class: FTraceCallGraph
+# Description:
+#	 A container for the ftrace callgraph of a single recursive function.
+#	 This can be a dpm_run_callback, dpm_prepare, or dpm_complete callgraph
+#	 Each instance is tied to a single device in a single phase, and is
+#	 comprised of an ordered list of FTraceLine objects
 class FTraceCallGraph:
 	start = -1.0
 	end = -1.0
@@ -327,24 +723,53 @@
 		if(not self.invalid):
 			self.setDepth(line)
 		if(line.depth == 0 and line.freturn):
+			if(self.start < 0):
+				self.start = line.time
 			self.end = line.time
 			self.list.append(line)
 			return True
 		if(self.invalid):
 			return False
 		if(len(self.list) >= 1000000 or self.depth < 0):
-		   first = self.list[0]
-		   self.list = []
-		   self.list.append(first)
-		   self.invalid = True
-		   id = "task %s cpu %s" % (match.group("pid"), match.group("cpu"))
-		   window = "(%f - %f)" % (self.start, line.time)
-		   data.vprint("Too much data for "+id+" "+window+", ignoring this callback")
-		   return False
+			if(len(self.list) > 0):
+				first = self.list[0]
+				self.list = []
+				self.list.append(first)
+			self.invalid = True
+			if(not match):
+				return False
+			id = 'task %s cpu %s' % (match.group('pid'), match.group('cpu'))
+			window = '(%f - %f)' % (self.start, line.time)
+			if(self.depth < 0):
+				print('Too much data for '+id+\
+					' (buffer overflow), ignoring this callback')
+			else:
+				print('Too much data for '+id+\
+					' '+window+', ignoring this callback')
+			return False
 		self.list.append(line)
 		if(self.start < 0):
 			self.start = line.time
 		return False
+	def slice(self, t0, tN):
+		minicg = FTraceCallGraph()
+		count = -1
+		firstdepth = 0
+		for l in self.list:
+			if(l.time < t0 or l.time > tN):
+				continue
+			if(count < 0):
+				if(not l.fcall or l.name == 'dev_driver_string'):
+					continue
+				firstdepth = l.depth
+				count = 0
+			l.depth -= firstdepth
+			minicg.addLine(l, 0)
+			if((count == 0 and l.freturn and l.fcall) or
+				(count > 0 and l.depth <= 0)):
+				break
+			count += 1
+		return minicg
 	def sanityCheck(self):
 		stack = dict()
 		cnt = 0
@@ -353,7 +778,7 @@
 				stack[l.depth] = l
 				cnt += 1
 			elif(l.freturn and not l.fcall):
-				if(not stack[l.depth]):
+				if(l.depth not in stack):
 					return False
 				stack[l.depth].length = l.length
 				stack[l.depth] = 0
@@ -363,40 +788,51 @@
 			return True
 		return False
 	def debugPrint(self, filename):
-		if(filename == "stdout"):
-			print("[%f - %f]") % (self.start, self.end)
+		if(filename == 'stdout'):
+			print('[%f - %f]') % (self.start, self.end)
 			for l in self.list:
 				if(l.freturn and l.fcall):
-					print("%f (%02d): %s(); (%.3f us)" % (l.time, l.depth, l.name, l.length*1000000))
+					print('%f (%02d): %s(); (%.3f us)' % (l.time, \
+						l.depth, l.name, l.length*1000000))
 				elif(l.freturn):
-					print("%f (%02d): %s} (%.3f us)" % (l.time, l.depth, l.name, l.length*1000000))
+					print('%f (%02d): %s} (%.3f us)' % (l.time, \
+						l.depth, l.name, l.length*1000000))
 				else:
-					print("%f (%02d): %s() { (%.3f us)" % (l.time, l.depth, l.name, l.length*1000000))
-			print(" ")
+					print('%f (%02d): %s() { (%.3f us)' % (l.time, \
+						l.depth, l.name, l.length*1000000))
+			print(' ')
 		else:
 			fp = open(filename, 'w')
 			print(filename)
 			for l in self.list:
 				if(l.freturn and l.fcall):
-					fp.write("%f (%02d): %s(); (%.3f us)\n" % (l.time, l.depth, l.name, l.length*1000000))
+					fp.write('%f (%02d): %s(); (%.3f us)\n' % (l.time, \
+						l.depth, l.name, l.length*1000000))
 				elif(l.freturn):
-					fp.write("%f (%02d): %s} (%.3f us)\n" % (l.time, l.depth, l.name, l.length*1000000))
+					fp.write('%f (%02d): %s} (%.3f us)\n' % (l.time, \
+						l.depth, l.name, l.length*1000000))
 				else:
-					fp.write("%f (%02d): %s() { (%.3f us)\n" % (l.time, l.depth, l.name, l.length*1000000))
+					fp.write('%f (%02d): %s() { (%.3f us)\n' % (l.time, \
+						l.depth, l.name, l.length*1000000))
 			fp.close()
 
+# Class: Timeline
+# Description:
+#	 A container for a suspend/resume html timeline. In older versions
+#	 of the script there were multiple timelines, but in the latest
+#	 there is only one.
 class Timeline:
 	html = {}
-	scaleH = 0.0 # height of the timescale row as a percent of the timeline height
+	scaleH = 0.0 # height of the row as a percent of the timeline height
 	rowH = 0.0 # height of each row in percent of the timeline height
 	row_height_pixels = 30
 	maxrows = 0
 	height = 0
 	def __init__(self):
 		self.html = {
-			'timeline': "",
-			'legend': "",
-			'scale': ""
+			'timeline': '',
+			'legend': '',
+			'scale': ''
 		}
 	def setRows(self, rows):
 		self.maxrows = int(rows)
@@ -407,104 +843,261 @@
 			r = 1.0
 		self.rowH = (100.0 - self.scaleH)/r
 
-# -- global objects --
+# Class: TestRun
+# Description:
+#	 A container for a suspend/resume test run. This is necessary as
+#	 there could be more than one, and they need to be separate.
+class TestRun:
+	ftrace_line_fmt_fg = \
+		'^ *(?P<time>[0-9\.]*) *\| *(?P<cpu>[0-9]*)\)'+\
+		' *(?P<proc>.*)-(?P<pid>[0-9]*) *\|'+\
+		'[ +!]*(?P<dur>[0-9\.]*) .*\|  (?P<msg>.*)'
+	ftrace_line_fmt_nop = \
+		' *(?P<proc>.*)-(?P<pid>[0-9]*) *\[(?P<cpu>[0-9]*)\] *'+\
+		'(?P<flags>.{4}) *(?P<time>[0-9\.]*): *'+\
+		'(?P<msg>.*)'
+	ftrace_line_fmt = ftrace_line_fmt_nop
+	cgformat = False
+	ftemp = dict()
+	ttemp = dict()
+	inthepipe = False
+	tracertype = ''
+	data = 0
+	def __init__(self, dataobj):
+		self.data = dataobj
+		self.ftemp = dict()
+		self.ttemp = dict()
+	def isReady(self):
+		if(tracertype == '' or not data):
+			return False
+		return True
+	def setTracerType(self, tracer):
+		self.tracertype = tracer
+		if(tracer == 'function_graph'):
+			self.cgformat = True
+			self.ftrace_line_fmt = self.ftrace_line_fmt_fg
+		elif(tracer == 'nop'):
+			self.ftrace_line_fmt = self.ftrace_line_fmt_nop
+		else:
+			doError('Invalid tracer format: [%s]' % tracer, False)
 
-sysvals = SystemValues()
-data = Data()
+# ----------------- FUNCTIONS --------------------
 
-# -- functions --
+# Function: vprint
+# Description:
+#	 verbose print (prints only with -verbose option)
+# Arguments:
+#	 msg: the debug/log message to print
+def vprint(msg):
+	global sysvals
+	if(sysvals.verbose):
+		print(msg)
 
 # Function: initFtrace
 # Description:
-#	 Configure ftrace to capture a function trace during suspend/resume
+#	 Configure ftrace to use trace events and/or a callgraph
 def initFtrace():
 	global sysvals
 
-	print("INITIALIZING FTRACE...")
-	# turn trace off
-	os.system("echo 0 > "+sysvals.tpath+"tracing_on")
-	# set the trace clock to global
-	os.system("echo global > "+sysvals.tpath+"trace_clock")
-	# set trace buffer to a huge value
-	os.system("echo nop > "+sysvals.tpath+"current_tracer")
-	os.system("echo 100000 > "+sysvals.tpath+"buffer_size_kb")
-	# clear the trace buffer
-	os.system("echo \"\" > "+sysvals.tpath+"trace")
-	# set trace type
-	os.system("echo function_graph > "+sysvals.tpath+"current_tracer")
-	os.system("echo \"\" > "+sysvals.tpath+"set_ftrace_filter")
-	# set trace format options
-	os.system("echo funcgraph-abstime > "+sysvals.tpath+"trace_options")
-	os.system("echo funcgraph-proc > "+sysvals.tpath+"trace_options")
-	# focus only on device suspend and resume
-	os.system("cat "+sysvals.tpath+"available_filter_functions | grep dpm_run_callback > "+sysvals.tpath+"set_graph_function")
+	tp = sysvals.tpath
+	cf = 'dpm_run_callback'
+	if(sysvals.usetraceeventsonly):
+		cf = '-e dpm_prepare -e dpm_complete -e dpm_run_callback'
+	if(sysvals.usecallgraph or sysvals.usetraceevents):
+		print('INITIALIZING FTRACE...')
+		# turn trace off
+		os.system('echo 0 > '+tp+'tracing_on')
+		# set the trace clock to global
+		os.system('echo global > '+tp+'trace_clock')
+		# set trace buffer to a huge value
+		os.system('echo nop > '+tp+'current_tracer')
+		os.system('echo 100000 > '+tp+'buffer_size_kb')
+		# initialize the callgraph trace, unless this is an x2 run
+		if(sysvals.usecallgraph and sysvals.execcount == 1):
+			# set trace type
+			os.system('echo function_graph > '+tp+'current_tracer')
+			os.system('echo "" > '+tp+'set_ftrace_filter')
+			# set trace format options
+			os.system('echo funcgraph-abstime > '+tp+'trace_options')
+			os.system('echo funcgraph-proc > '+tp+'trace_options')
+			# focus only on device suspend and resume
+			os.system('cat '+tp+'available_filter_functions | grep '+\
+				cf+' > '+tp+'set_graph_function')
+		if(sysvals.usetraceevents):
+			# turn trace events on
+			events = iter(sysvals.traceevents)
+			for e in events:
+				os.system('echo 1 > '+sysvals.epath+e+'/enable')
+		# clear the trace buffer
+		os.system('echo "" > '+tp+'trace')
+
+# Function: initFtraceAndroid
+# Description:
+#	 Configure ftrace to capture trace events
+def initFtraceAndroid():
+	global sysvals
+
+	tp = sysvals.tpath
+	if(sysvals.usetraceevents):
+		print('INITIALIZING FTRACE...')
+		# turn trace off
+		os.system(sysvals.adb+" shell 'echo 0 > "+tp+"tracing_on'")
+		# set the trace clock to global
+		os.system(sysvals.adb+" shell 'echo global > "+tp+"trace_clock'")
+		# set trace buffer to a huge value
+		os.system(sysvals.adb+" shell 'echo nop > "+tp+"current_tracer'")
+		os.system(sysvals.adb+" shell 'echo 10000 > "+tp+"buffer_size_kb'")
+		# turn trace events on
+		events = iter(sysvals.traceevents)
+		for e in events:
+			os.system(sysvals.adb+" shell 'echo 1 > "+\
+				sysvals.epath+e+"/enable'")
+		# clear the trace buffer
+		os.system(sysvals.adb+" shell 'echo \"\" > "+tp+"trace'")
 
 # Function: verifyFtrace
 # Description:
 #	 Check that ftrace is working on the system
+# Output:
+#	 True or False
 def verifyFtrace():
 	global sysvals
-	files = ["available_filter_functions", "buffer_size_kb",
-			 "current_tracer", "set_ftrace_filter",
-			 "trace", "trace_marker"]
+	# files needed for any trace data
+	files = ['buffer_size_kb', 'current_tracer', 'trace', 'trace_clock',
+			 'trace_marker', 'trace_options', 'tracing_on']
+	# files needed for callgraph trace data
+	tp = sysvals.tpath
+	if(sysvals.usecallgraph):
+		files += [
+			'available_filter_functions',
+			'set_ftrace_filter',
+			'set_graph_function'
+		]
 	for f in files:
-		if(os.path.exists(sysvals.tpath+f) == False):
-			return False
+		if(sysvals.android):
+			out = os.popen(sysvals.adb+' shell ls '+tp+f).read().strip()
+			if(out != tp+f):
+				return False
+		else:
+			if(os.path.exists(tp+f) == False):
+				return False
 	return True
 
-def parseStamp(line):
-	global data, sysvals
-	stampfmt = r"# suspend-(?P<m>[0-9]{2})(?P<d>[0-9]{2})(?P<y>[0-9]{2})-"+\
-				"(?P<H>[0-9]{2})(?P<M>[0-9]{2})(?P<S>[0-9]{2})"+\
-				" (?P<host>.*) (?P<mode>.*) (?P<kernel>.*)$"
-	m = re.match(stampfmt, line)
-	if(m):
-		dt = datetime.datetime(int(m.group("y"))+2000, int(m.group("m")),
-			int(m.group("d")), int(m.group("H")), int(m.group("M")),
-			int(m.group("S")))
-		data.stamp['time'] = dt.strftime("%B %d %Y, %I:%M:%S %p")
-		data.stamp['host'] = m.group("host")
-		data.stamp['mode'] = m.group("mode")
-		data.stamp['kernel'] = m.group("kernel")
-		sysvals.suspendmode = data.stamp['mode']
-
-# Function: analyzeTraceLog
+# Function: parseStamp
 # Description:
-#	 Analyse an ftrace log output file generated from this app during
-#	 the execution phase. Create an "ftrace" structure in memory for
-#	 subsequent formatting in the html output file
-def analyzeTraceLog():
-	global sysvals, data
+#	 Pull in the stamp comment line from the data file(s),
+#	 create the stamp, and add it to the global sysvals object
+# Arguments:
+#	 m: the valid re.match output for the stamp line
+def parseStamp(m, data):
+	global sysvals
+	data.stamp = {'time': '', 'host': '', 'mode': ''}
+	dt = datetime(int(m.group('y'))+2000, int(m.group('m')),
+		int(m.group('d')), int(m.group('H')), int(m.group('M')),
+		int(m.group('S')))
+	data.stamp['time'] = dt.strftime('%B %d %Y, %I:%M:%S %p')
+	data.stamp['host'] = m.group('host')
+	data.stamp['mode'] = m.group('mode')
+	data.stamp['kernel'] = m.group('kernel')
+	sysvals.suspendmode = data.stamp['mode']
+	if not sysvals.stamp:
+		sysvals.stamp = data.stamp
 
-	# the ftrace data is tied to the dmesg data
-	if(not data.usedmesg):
-		return
+# Function: diffStamp
+# Description:
+#	compare the host, kernel, and mode fields in 3 stamps
+# Arguments:
+#	 stamp1: string array with mode, kernel, and host
+#	 stamp2: string array with mode, kernel, and host
+# Return:
+#	True if stamps differ, False if they're the same
+def diffStamp(stamp1, stamp2):
+	if 'host' in stamp1 and 'host' in stamp2:
+		if stamp1['host'] != stamp2['host']:
+			return True
+	if 'kernel' in stamp1 and 'kernel' in stamp2:
+		if stamp1['kernel'] != stamp2['kernel']:
+			return True
+	if 'mode' in stamp1 and 'mode' in stamp2:
+		if stamp1['mode'] != stamp2['mode']:
+			return True
+	return False
 
-	# read through the ftrace and parse the data
-	data.vprint("Analyzing the ftrace data...")
-	ftrace_line_fmt = r"^ *(?P<time>[0-9\.]*) *\| *(?P<cpu>[0-9]*)\)"+\
-					   " *(?P<proc>.*)-(?P<pid>[0-9]*) *\|"+\
-					   "[ +!]*(?P<dur>[0-9\.]*) .*\|  (?P<msg>.*)"
-	ftemp = dict()
-	inthepipe = False
+# Function: doesTraceLogHaveTraceEvents
+# Description:
+#	 Quickly determine if the ftrace log has some or all of the trace events
+#	 required for primary parsing. Set the usetraceevents and/or
+#	 usetraceeventsonly flags in the global sysvals object
+def doesTraceLogHaveTraceEvents():
+	global sysvals
+
+	sysvals.usetraceeventsonly = True
+	sysvals.usetraceevents = False
+	for e in sysvals.traceevents:
+		out = os.popen('cat '+sysvals.ftracefile+' | grep "'+e+': "').read()
+		if(not out):
+			sysvals.usetraceeventsonly = False
+		if(e == 'suspend_resume' and out):
+			sysvals.usetraceevents = True
+
+# Function: appendIncompleteTraceLog
+# Description:
+#	 [deprecated for kernel 3.15 or newer]
+#	 Legacy support of ftrace outputs that lack the device_pm_callback
+#	 and/or suspend_resume trace events. The primary data should be
+#	 taken from dmesg, and this ftrace is used only for callgraph data
+#	 or custom actions in the timeline. The data is appended to the Data
+#	 objects provided.
+# Arguments:
+#	 testruns: the array of Data objects obtained from parseKernelLog
+def appendIncompleteTraceLog(testruns):
+	global sysvals
+
+	# create TestRun vessels for ftrace parsing
+	testcnt = len(testruns)
+	testidx = -1
+	testrun = []
+	for data in testruns:
+		testrun.append(TestRun(data))
+
+	# extract the callgraph and traceevent data
+	vprint('Analyzing the ftrace data...')
 	tf = open(sysvals.ftracefile, 'r')
-	count = 0
 	for line in tf:
-		count = count + 1
-		# grab the time stamp if it's valid
-		if(count == 1):
-			parseStamp(line)
+		# remove any latent carriage returns
+		line = line.replace('\r\n', '')
+		# grab the time stamp first (signifies the start of the test run)
+		m = re.match(sysvals.stampfmt, line)
+		if(m):
+			testidx += 1
+			parseStamp(m, testrun[testidx].data)
 			continue
-		# parse only valid lines
-		m = re.match(ftrace_line_fmt, line)
+		# pull out any firmware data
+		if(re.match(sysvals.firmwarefmt, line)):
+			continue
+		# if we havent found a test time stamp yet keep spinning til we do
+		if(testidx < 0):
+			continue
+		# determine the trace data type (required for further parsing)
+		m = re.match(sysvals.tracertypefmt, line)
+		if(m):
+			tracer = m.group('t')
+			testrun[testidx].setTracerType(tracer)
+			continue
+		# parse only valid lines, if this isnt one move on
+		m = re.match(testrun[testidx].ftrace_line_fmt, line)
 		if(not m):
 			continue
-		m_time = m.group("time")
-		m_pid = m.group("pid")
-		m_msg = m.group("msg")
-		m_dur = m.group("dur")
+		# gather the basic message data from the line
+		m_time = m.group('time')
+		m_pid = m.group('pid')
+		m_msg = m.group('msg')
+		if(testrun[testidx].cgformat):
+			m_param3 = m.group('dur')
+		else:
+			m_param3 = 'traceevent'
 		if(m_time and m_pid and m_msg):
-			t = FTraceLine(m_time, m_msg, m_dur)
+			t = FTraceLine(m_time, m_msg, m_param3)
 			pid = int(m_pid)
 		else:
 			continue
@@ -512,265 +1105,840 @@
 		if(not t.fcall and not t.freturn and not t.fevent):
 			continue
 		# only parse the ftrace data during suspend/resume
-		if(not inthepipe):
+		data = testrun[testidx].data
+		if(not testrun[testidx].inthepipe):
 			# look for the suspend start marker
 			if(t.fevent):
-				if(t.name == "SUSPEND START"):
-					data.vprint("SUSPEND START %f %s:%d" % (t.time, sysvals.ftracefile, count))
-					inthepipe = True
+				if(t.name == 'SUSPEND START'):
+					testrun[testidx].inthepipe = True
+					data.setStart(t.time)
 				continue
 		else:
-			# look for the resume end marker
+			# trace event processing
 			if(t.fevent):
-				if(t.name == "RESUME COMPLETE"):
-					data.vprint("RESUME COMPLETE %f %s:%d" % (t.time, sysvals.ftracefile, count))
-					inthepipe = False
-					break
-				continue
-			# create a callgraph object for the data
-			if(pid not in ftemp):
-				ftemp[pid] = FTraceCallGraph()
-			# when the call is finished, see which device matches it
-			if(ftemp[pid].addLine(t, m)):
-				if(not ftemp[pid].sanityCheck()):
-					id = "task %s cpu %s" % (pid, m.group("cpu"))
-					data.vprint("Sanity check failed for "+id+", ignoring this callback")
-					continue
-				callstart = ftemp[pid].start
-				callend = ftemp[pid].end
-				for p in data.phases:
-					if(data.dmesg[p]['start'] <= callstart and callstart <= data.dmesg[p]['end']):
-						list = data.dmesg[p]['list']
-						for devname in list:
-							dev = list[devname]
-							if(pid == dev['pid'] and callstart <= dev['start'] and callend >= dev['end']):
-								data.vprint("%15s [%f - %f] %s(%d)" % (p, callstart, callend, devname, pid))
-								dev['ftrace'] = ftemp[pid]
+				if(t.name == 'RESUME COMPLETE'):
+					testrun[testidx].inthepipe = False
+					data.setEnd(t.time)
+					if(testidx == testcnt - 1):
 						break
-				ftemp[pid] = FTraceCallGraph()
+					continue
+				# general trace events have two types, begin and end
+				if(re.match('(?P<name>.*) begin$', t.name)):
+					isbegin = True
+				elif(re.match('(?P<name>.*) end$', t.name)):
+					isbegin = False
+				else:
+					continue
+				m = re.match('(?P<name>.*)\[(?P<val>[0-9]*)\] .*', t.name)
+				if(m):
+					val = m.group('val')
+					if val == '0':
+						name = m.group('name')
+					else:
+						name = m.group('name')+'['+val+']'
+				else:
+					m = re.match('(?P<name>.*) .*', t.name)
+					name = m.group('name')
+				# special processing for trace events
+				if re.match('dpm_prepare\[.*', name):
+					continue
+				elif re.match('machine_suspend.*', name):
+					continue
+				elif re.match('suspend_enter\[.*', name):
+					if(not isbegin):
+						data.dmesg['suspend_prepare']['end'] = t.time
+					continue
+				elif re.match('dpm_suspend\[.*', name):
+					if(not isbegin):
+						data.dmesg['suspend']['end'] = t.time
+					continue
+				elif re.match('dpm_suspend_late\[.*', name):
+					if(isbegin):
+						data.dmesg['suspend_late']['start'] = t.time
+					else:
+						data.dmesg['suspend_late']['end'] = t.time
+					continue
+				elif re.match('dpm_suspend_noirq\[.*', name):
+					if(isbegin):
+						data.dmesg['suspend_noirq']['start'] = t.time
+					else:
+						data.dmesg['suspend_noirq']['end'] = t.time
+					continue
+				elif re.match('dpm_resume_noirq\[.*', name):
+					if(isbegin):
+						data.dmesg['resume_machine']['end'] = t.time
+						data.dmesg['resume_noirq']['start'] = t.time
+					else:
+						data.dmesg['resume_noirq']['end'] = t.time
+					continue
+				elif re.match('dpm_resume_early\[.*', name):
+					if(isbegin):
+						data.dmesg['resume_early']['start'] = t.time
+					else:
+						data.dmesg['resume_early']['end'] = t.time
+					continue
+				elif re.match('dpm_resume\[.*', name):
+					if(isbegin):
+						data.dmesg['resume']['start'] = t.time
+					else:
+						data.dmesg['resume']['end'] = t.time
+					continue
+				elif re.match('dpm_complete\[.*', name):
+					if(isbegin):
+						data.dmesg['resume_complete']['start'] = t.time
+					else:
+						data.dmesg['resume_complete']['end'] = t.time
+					continue
+				# is this trace event outside of the devices calls
+				if(data.isTraceEventOutsideDeviceCalls(pid, t.time)):
+					# global events (outside device calls) are simply graphed
+					if(isbegin):
+						# store each trace event in ttemp
+						if(name not in testrun[testidx].ttemp):
+							testrun[testidx].ttemp[name] = []
+						testrun[testidx].ttemp[name].append(\
+							{'begin': t.time, 'end': t.time})
+					else:
+						# finish off matching trace event in ttemp
+						if(name in testrun[testidx].ttemp):
+							testrun[testidx].ttemp[name][-1]['end'] = t.time
+				else:
+					if(isbegin):
+						data.addIntraDevTraceEvent('', name, pid, t.time)
+					else:
+						data.capIntraDevTraceEvent('', name, pid, t.time)
+			# call/return processing
+			elif sysvals.usecallgraph:
+				# create a callgraph object for the data
+				if(pid not in testrun[testidx].ftemp):
+					testrun[testidx].ftemp[pid] = []
+					testrun[testidx].ftemp[pid].append(FTraceCallGraph())
+				# when the call is finished, see which device matches it
+				cg = testrun[testidx].ftemp[pid][-1]
+				if(cg.addLine(t, m)):
+					testrun[testidx].ftemp[pid].append(FTraceCallGraph())
 	tf.close()
 
-# Function: sortKernelLog
+	for test in testrun:
+		# add the traceevent data to the device hierarchy
+		if(sysvals.usetraceevents):
+			for name in test.ttemp:
+				for event in test.ttemp[name]:
+					begin = event['begin']
+					end = event['end']
+					# if event starts before timeline start, expand timeline
+					if(begin < test.data.start):
+						test.data.setStart(begin)
+					# if event ends after timeline end, expand the timeline
+					if(end > test.data.end):
+						test.data.setEnd(end)
+					test.data.newActionGlobal(name, begin, end)
+
+		# add the callgraph data to the device hierarchy
+		for pid in test.ftemp:
+			for cg in test.ftemp[pid]:
+				if(not cg.sanityCheck()):
+					id = 'task %s cpu %s' % (pid, m.group('cpu'))
+					vprint('Sanity check failed for '+\
+						id+', ignoring this callback')
+					continue
+				callstart = cg.start
+				callend = cg.end
+				for p in test.data.phases:
+					if(test.data.dmesg[p]['start'] <= callstart and
+						callstart <= test.data.dmesg[p]['end']):
+						list = test.data.dmesg[p]['list']
+						for devname in list:
+							dev = list[devname]
+							if(pid == dev['pid'] and
+								callstart <= dev['start'] and
+								callend >= dev['end']):
+								dev['ftrace'] = cg
+						break
+
+		if(sysvals.verbose):
+			test.data.printDetails()
+
+
+	# add the time in between the tests as a new phase so we can see it
+	if(len(testruns) > 1):
+		t1e = testruns[0].getEnd()
+		t2s = testruns[-1].getStart()
+		testruns[-1].newPhaseWithSingleAction('user mode', \
+			'user mode', t1e, t2s, '#FF9966')
+
+# Function: parseTraceLog
 # Description:
-#	 The dmesg output log sometimes comes with with lines that have
-#	 timestamps out of order. This could cause issues since a call
-#	 could accidentally end up in the wrong phase
-def sortKernelLog():
-	global sysvals, data
+#	 Analyze an ftrace log output file generated from this app during
+#	 the execution phase. Used when the ftrace log is the primary data source
+#	 and includes the suspend_resume and device_pm_callback trace events
+#	 The ftrace filename is taken from sysvals
+# Output:
+#	 An array of Data objects
+def parseTraceLog():
+	global sysvals
+
+	vprint('Analyzing the ftrace data...')
+	if(os.path.exists(sysvals.ftracefile) == False):
+		doError('%s doesnt exist' % sysvals.ftracefile, False)
+
+	# extract the callgraph and traceevent data
+	testruns = []
+	testdata = []
+	testrun = 0
+	data = 0
+	tf = open(sysvals.ftracefile, 'r')
+	phase = 'suspend_prepare'
+	for line in tf:
+		# remove any latent carriage returns
+		line = line.replace('\r\n', '')
+		# stamp line: each stamp means a new test run
+		m = re.match(sysvals.stampfmt, line)
+		if(m):
+			data = Data(len(testdata))
+			testdata.append(data)
+			testrun = TestRun(data)
+			testruns.append(testrun)
+			parseStamp(m, data)
+			continue
+		if(not data):
+			continue
+		# firmware line: pull out any firmware data
+		m = re.match(sysvals.firmwarefmt, line)
+		if(m):
+			data.fwSuspend = int(m.group('s'))
+			data.fwResume = int(m.group('r'))
+			if(data.fwSuspend > 0 or data.fwResume > 0):
+				data.fwValid = True
+			continue
+		# tracer type line: determine the trace data type
+		m = re.match(sysvals.tracertypefmt, line)
+		if(m):
+			tracer = m.group('t')
+			testrun.setTracerType(tracer)
+			continue
+		# post resume time line: did this test run include post-resume data
+		m = re.match(sysvals.postresumefmt, line)
+		if(m):
+			t = int(m.group('t'))
+			if(t > 0):
+				sysvals.postresumetime = t
+			continue
+		# ftrace line: parse only valid lines
+		m = re.match(testrun.ftrace_line_fmt, line)
+		if(not m):
+			continue
+		# gather the basic message data from the line
+		m_time = m.group('time')
+		m_pid = m.group('pid')
+		m_msg = m.group('msg')
+		if(testrun.cgformat):
+			m_param3 = m.group('dur')
+		else:
+			m_param3 = 'traceevent'
+		if(m_time and m_pid and m_msg):
+			t = FTraceLine(m_time, m_msg, m_param3)
+			pid = int(m_pid)
+		else:
+			continue
+		# the line should be a call, return, or event
+		if(not t.fcall and not t.freturn and not t.fevent):
+			continue
+		# only parse the ftrace data during suspend/resume
+		if(not testrun.inthepipe):
+			# look for the suspend start marker
+			if(t.fevent):
+				if(t.name == 'SUSPEND START'):
+					testrun.inthepipe = True
+					data.setStart(t.time)
+			continue
+		# trace event processing
+		if(t.fevent):
+			if(t.name == 'RESUME COMPLETE'):
+				if(sysvals.postresumetime > 0):
+					phase = 'post_resume'
+					data.newPhase(phase, t.time, t.time, '#FF9966', -1)
+				else:
+					testrun.inthepipe = False
+				data.setEnd(t.time)
+				continue
+			if(phase == 'post_resume'):
+				data.setEnd(t.time)
+			if(t.type == 'suspend_resume'):
+				# suspend_resume trace events have two types, begin and end
+				if(re.match('(?P<name>.*) begin$', t.name)):
+					isbegin = True
+				elif(re.match('(?P<name>.*) end$', t.name)):
+					isbegin = False
+				else:
+					continue
+				m = re.match('(?P<name>.*)\[(?P<val>[0-9]*)\] .*', t.name)
+				if(m):
+					val = m.group('val')
+					if val == '0':
+						name = m.group('name')
+					else:
+						name = m.group('name')+'['+val+']'
+				else:
+					m = re.match('(?P<name>.*) .*', t.name)
+					name = m.group('name')
+				# ignore these events
+				if(re.match('acpi_suspend\[.*', t.name) or
+					re.match('suspend_enter\[.*', name)):
+					continue
+				# -- phase changes --
+				# suspend_prepare start
+				if(re.match('dpm_prepare\[.*', t.name)):
+					phase = 'suspend_prepare'
+					if(not isbegin):
+						data.dmesg[phase]['end'] = t.time
+					continue
+				# suspend start
+				elif(re.match('dpm_suspend\[.*', t.name)):
+					phase = 'suspend'
+					data.setPhase(phase, t.time, isbegin)
+					continue
+				# suspend_late start
+				elif(re.match('dpm_suspend_late\[.*', t.name)):
+					phase = 'suspend_late'
+					data.setPhase(phase, t.time, isbegin)
+					continue
+				# suspend_noirq start
+				elif(re.match('dpm_suspend_noirq\[.*', t.name)):
+					phase = 'suspend_noirq'
+					data.setPhase(phase, t.time, isbegin)
+					if(not isbegin):
+						phase = 'suspend_machine'
+						data.dmesg[phase]['start'] = t.time
+					continue
+				# suspend_machine/resume_machine
+				elif(re.match('machine_suspend\[.*', t.name)):
+					if(isbegin):
+						phase = 'suspend_machine'
+						data.dmesg[phase]['end'] = t.time
+						data.tSuspended = t.time
+					else:
+						if(sysvals.suspendmode in ['mem', 'disk']):
+							data.dmesg['suspend_machine']['end'] = t.time
+							data.tSuspended = t.time
+						phase = 'resume_machine'
+						data.dmesg[phase]['start'] = t.time
+						data.tResumed = t.time
+						data.tLow = data.tResumed - data.tSuspended
+					continue
+				# resume_noirq start
+				elif(re.match('dpm_resume_noirq\[.*', t.name)):
+					phase = 'resume_noirq'
+					data.setPhase(phase, t.time, isbegin)
+					if(isbegin):
+						data.dmesg['resume_machine']['end'] = t.time
+					continue
+				# resume_early start
+				elif(re.match('dpm_resume_early\[.*', t.name)):
+					phase = 'resume_early'
+					data.setPhase(phase, t.time, isbegin)
+					continue
+				# resume start
+				elif(re.match('dpm_resume\[.*', t.name)):
+					phase = 'resume'
+					data.setPhase(phase, t.time, isbegin)
+					continue
+				# resume complete start
+				elif(re.match('dpm_complete\[.*', t.name)):
+					phase = 'resume_complete'
+					if(isbegin):
+						data.dmesg[phase]['start'] = t.time
+					continue
+
+				# is this trace event outside of the devices calls
+				if(data.isTraceEventOutsideDeviceCalls(pid, t.time)):
+					# global events (outside device calls) are simply graphed
+					if(name not in testrun.ttemp):
+						testrun.ttemp[name] = []
+					if(isbegin):
+						# create a new list entry
+						testrun.ttemp[name].append(\
+							{'begin': t.time, 'end': t.time})
+					else:
+						if(len(testrun.ttemp[name]) > 0):
+							# if an antry exists, assume this is its end
+							testrun.ttemp[name][-1]['end'] = t.time
+						elif(phase == 'post_resume'):
+							# post resume events can just have ends
+							testrun.ttemp[name].append({
+								'begin': data.dmesg[phase]['start'],
+								'end': t.time})
+				else:
+					if(isbegin):
+						data.addIntraDevTraceEvent('', name, pid, t.time)
+					else:
+						data.capIntraDevTraceEvent('', name, pid, t.time)
+			# device callback start
+			elif(t.type == 'device_pm_callback_start'):
+				m = re.match('(?P<drv>.*) (?P<d>.*), parent: *(?P<p>.*), .*',\
+					t.name);
+				if(not m):
+					continue
+				drv = m.group('drv')
+				n = m.group('d')
+				p = m.group('p')
+				if(n and p):
+					data.newAction(phase, n, pid, p, t.time, -1, drv)
+			# device callback finish
+			elif(t.type == 'device_pm_callback_end'):
+				m = re.match('(?P<drv>.*) (?P<d>.*), err.*', t.name);
+				if(not m):
+					continue
+				n = m.group('d')
+				list = data.dmesg[phase]['list']
+				if(n in list):
+					dev = list[n]
+					dev['length'] = t.time - dev['start']
+					dev['end'] = t.time
+		# callgraph processing
+		elif sysvals.usecallgraph:
+			# this shouldn't happen, but JIC, ignore callgraph data post-res
+			if(phase == 'post_resume'):
+				continue
+			# create a callgraph object for the data
+			if(pid not in testrun.ftemp):
+				testrun.ftemp[pid] = []
+				testrun.ftemp[pid].append(FTraceCallGraph())
+			# when the call is finished, see which device matches it
+			cg = testrun.ftemp[pid][-1]
+			if(cg.addLine(t, m)):
+				testrun.ftemp[pid].append(FTraceCallGraph())
+	tf.close()
+
+	for test in testruns:
+		# add the traceevent data to the device hierarchy
+		if(sysvals.usetraceevents):
+			for name in test.ttemp:
+				for event in test.ttemp[name]:
+					begin = event['begin']
+					end = event['end']
+					# if event starts before timeline start, expand timeline
+					if(begin < test.data.start):
+						test.data.setStart(begin)
+					# if event ends after timeline end, expand the timeline
+					if(end > test.data.end):
+						test.data.setEnd(end)
+					test.data.newActionGlobal(name, begin, end)
+
+		# add the callgraph data to the device hierarchy
+		borderphase = {
+			'dpm_prepare': 'suspend_prepare',
+			'dpm_complete': 'resume_complete'
+		}
+		for pid in test.ftemp:
+			for cg in test.ftemp[pid]:
+				if len(cg.list) < 2:
+					continue
+				if(not cg.sanityCheck()):
+					id = 'task %s cpu %s' % (pid, m.group('cpu'))
+					vprint('Sanity check failed for '+\
+						id+', ignoring this callback')
+					continue
+				callstart = cg.start
+				callend = cg.end
+				if(cg.list[0].name in borderphase):
+					p = borderphase[cg.list[0].name]
+					list = test.data.dmesg[p]['list']
+					for devname in list:
+						dev = list[devname]
+						if(pid == dev['pid'] and
+							callstart <= dev['start'] and
+							callend >= dev['end']):
+							dev['ftrace'] = cg.slice(dev['start'], dev['end'])
+					continue
+				if(cg.list[0].name != 'dpm_run_callback'):
+					continue
+				for p in test.data.phases:
+					if(test.data.dmesg[p]['start'] <= callstart and
+						callstart <= test.data.dmesg[p]['end']):
+						list = test.data.dmesg[p]['list']
+						for devname in list:
+							dev = list[devname]
+							if(pid == dev['pid'] and
+								callstart <= dev['start'] and
+								callend >= dev['end']):
+								dev['ftrace'] = cg
+						break
+
+	# fill in any missing phases
+	for data in testdata:
+		lp = data.phases[0]
+		for p in data.phases:
+			if(data.dmesg[p]['start'] < 0 and data.dmesg[p]['end'] < 0):
+				print('WARNING: phase "%s" is missing!' % p)
+			if(data.dmesg[p]['start'] < 0):
+				data.dmesg[p]['start'] = data.dmesg[lp]['end']
+				if(p == 'resume_machine'):
+					data.tSuspended = data.dmesg[lp]['end']
+					data.tResumed = data.dmesg[lp]['end']
+					data.tLow = 0
+			if(data.dmesg[p]['end'] < 0):
+				data.dmesg[p]['end'] = data.dmesg[p]['start']
+			lp = p
+
+		if(len(sysvals.devicefilter) > 0):
+			data.deviceFilter(sysvals.devicefilter)
+		data.fixupInitcallsThatDidntReturn()
+		if(sysvals.verbose):
+			data.printDetails()
+
+	# add the time in between the tests as a new phase so we can see it
+	if(len(testdata) > 1):
+		t1e = testdata[0].getEnd()
+		t2s = testdata[-1].getStart()
+		testdata[-1].newPhaseWithSingleAction('user mode', \
+			'user mode', t1e, t2s, '#FF9966')
+	return testdata
+
+# Function: loadKernelLog
+# Description:
+#	 [deprecated for kernel 3.15.0 or newer]
+#	 load the dmesg file into memory and fix up any ordering issues
+#	 The dmesg filename is taken from sysvals
+# Output:
+#	 An array of empty Data objects with only their dmesgtext attributes set
+def loadKernelLog():
+	global sysvals
+
+	vprint('Analyzing the dmesg data...')
+	if(os.path.exists(sysvals.dmesgfile) == False):
+		doError('%s doesnt exist' % sysvals.dmesgfile, False)
+
+	# there can be multiple test runs in a single file delineated by stamps
+	testruns = []
+	data = 0
 	lf = open(sysvals.dmesgfile, 'r')
-	dmesglist = []
-	count = 0
 	for line in lf:
-		line = line.replace("\r\n", "")
-		if(count == 0):
-			parseStamp(line)
-		elif(count == 1):
-			m = re.match(r"# fwsuspend (?P<s>[0-9]*) fwresume (?P<r>[0-9]*)$", line)
-			if(m):
-				data.fwSuspend = int(m.group("s"))
-				data.fwResume = int(m.group("r"))
-				if(data.fwSuspend > 0 or data.fwResume > 0):
-					data.fwValid = True
-		if(re.match(r".*(\[ *)(?P<ktime>[0-9\.]*)(\]) (?P<msg>.*)", line)):
-			dmesglist.append(line)
-		count += 1
+		line = line.replace('\r\n', '')
+		idx = line.find('[')
+		if idx > 1:
+			line = line[idx:]
+		m = re.match(sysvals.stampfmt, line)
+		if(m):
+			if(data):
+				testruns.append(data)
+			data = Data(len(testruns))
+			parseStamp(m, data)
+			continue
+		if(not data):
+			continue
+		m = re.match(sysvals.firmwarefmt, line)
+		if(m):
+			data.fwSuspend = int(m.group('s'))
+			data.fwResume = int(m.group('r'))
+			if(data.fwSuspend > 0 or data.fwResume > 0):
+				data.fwValid = True
+			continue
+		m = re.match('[ \t]*(\[ *)(?P<ktime>[0-9\.]*)(\]) (?P<msg>.*)', line)
+		if(m):
+			data.dmesgtext.append(line)
+			if(re.match('ACPI: resume from mwait', m.group('msg'))):
+				print('NOTE: This suspend appears to be freeze rather than'+\
+					' %s, it will be treated as such' % sysvals.suspendmode)
+				sysvals.suspendmode = 'freeze'
+		else:
+			vprint('ignoring dmesg line: %s' % line.replace('\n', ''))
+	testruns.append(data)
 	lf.close()
-	last = ""
 
-	# fix lines with the same time stamp and function with the call and return swapped
-	for line in dmesglist:
-		mc = re.match(r".*(\[ *)(?P<t>[0-9\.]*)(\]) calling  (?P<f>.*)\+ @ .*, parent: .*", line)
-		mr = re.match(r".*(\[ *)(?P<t>[0-9\.]*)(\]) call (?P<f>.*)\+ returned .* after (?P<dt>.*) usecs", last)
-		if(mc and mr and (mc.group("t") == mr.group("t")) and (mc.group("f") == mr.group("f"))):
-			i = dmesglist.index(last)
-			j = dmesglist.index(line)
-			dmesglist[i] = line
-			dmesglist[j] = last
-		last = line
-	return dmesglist
+	if(not data):
+		print('ERROR: analyze_suspend header missing from dmesg log')
+		sys.exit()
 
-# Function: analyzeKernelLog
+	# fix lines with same timestamp/function with the call and return swapped
+	for data in testruns:
+		last = ''
+		for line in data.dmesgtext:
+			mc = re.match('.*(\[ *)(?P<t>[0-9\.]*)(\]) calling  '+\
+				'(?P<f>.*)\+ @ .*, parent: .*', line)
+			mr = re.match('.*(\[ *)(?P<t>[0-9\.]*)(\]) call '+\
+				'(?P<f>.*)\+ returned .* after (?P<dt>.*) usecs', last)
+			if(mc and mr and (mc.group('t') == mr.group('t')) and
+				(mc.group('f') == mr.group('f'))):
+				i = data.dmesgtext.index(last)
+				j = data.dmesgtext.index(line)
+				data.dmesgtext[i] = line
+				data.dmesgtext[j] = last
+			last = line
+	return testruns
+
+# Function: parseKernelLog
 # Description:
+#	 [deprecated for kernel 3.15.0 or newer]
 #	 Analyse a dmesg log output file generated from this app during
 #	 the execution phase. Create a set of device structures in memory
 #	 for subsequent formatting in the html output file
-def analyzeKernelLog():
-	global sysvals, data
+#	 This call is only for legacy support on kernels where the ftrace
+#	 data lacks the suspend_resume or device_pm_callbacks trace events.
+# Arguments:
+#	 data: an empty Data object (with dmesgtext) obtained from loadKernelLog
+# Output:
+#	 The filled Data object
+def parseKernelLog(data):
+	global sysvals
 
-	print("PROCESSING DATA")
-	data.vprint("Analyzing the dmesg data...")
-	if(os.path.exists(sysvals.dmesgfile) == False):
-		print("ERROR: %s doesn't exist") % sysvals.dmesgfile
-		return False
+	phase = 'suspend_runtime'
 
-	lf = sortKernelLog()
-	phase = "suspend_runtime"
+	if(data.fwValid):
+		vprint('Firmware Suspend = %u ns, Firmware Resume = %u ns' % \
+			(data.fwSuspend, data.fwResume))
 
+	# dmesg phase match table
 	dm = {
-		'suspend_general': r"PM: Syncing filesystems.*",
-		  'suspend_early': r"PM: suspend of devices complete after.*",
-		  'suspend_noirq': r"PM: late suspend of devices complete after.*",
-		    'suspend_cpu': r"PM: noirq suspend of devices complete after.*",
-		     'resume_cpu': r"ACPI: Low-level resume complete.*",
-		   'resume_noirq': r"ACPI: Waking up from system sleep state.*",
-		   'resume_early': r"PM: noirq resume of devices complete after.*",
-		 'resume_general': r"PM: early resume of devices complete after.*",
-		'resume_complete': r".*Restarting tasks \.\.\..*",
+		'suspend_prepare': 'PM: Syncing filesystems.*',
+		        'suspend': 'PM: Entering [a-z]* sleep.*',
+		   'suspend_late': 'PM: suspend of devices complete after.*',
+		  'suspend_noirq': 'PM: late suspend of devices complete after.*',
+		'suspend_machine': 'PM: noirq suspend of devices complete after.*',
+		 'resume_machine': 'ACPI: Low-level resume complete.*',
+		   'resume_noirq': 'ACPI: Waking up from system sleep state.*',
+		   'resume_early': 'PM: noirq resume of devices complete after.*',
+		         'resume': 'PM: early resume of devices complete after.*',
+		'resume_complete': 'PM: resume of devices complete after.*',
+		    'post_resume': '.*Restarting tasks \.\.\..*',
 	}
-	if(sysvals.suspendmode == "standby"):
-		dm['resume_cpu'] = r"PM: Restoring platform NVS memory"
-	elif(sysvals.suspendmode == "disk"):
-		dm['suspend_early'] = r"PM: freeze of devices complete after.*"
-		dm['suspend_noirq'] = r"PM: late freeze of devices complete after.*"
-		dm['suspend_cpu'] = r"PM: noirq freeze of devices complete after.*"
-		dm['resume_cpu'] = r"PM: Restoring platform NVS memory"
-		dm['resume_early'] = r"PM: noirq restore of devices complete after.*"
-		dm['resume_general'] = r"PM: early restore of devices complete after.*"
+	if(sysvals.suspendmode == 'standby'):
+		dm['resume_machine'] = 'PM: Restoring platform NVS memory'
+	elif(sysvals.suspendmode == 'disk'):
+		dm['suspend_late'] = 'PM: freeze of devices complete after.*'
+		dm['suspend_noirq'] = 'PM: late freeze of devices complete after.*'
+		dm['suspend_machine'] = 'PM: noirq freeze of devices complete after.*'
+		dm['resume_machine'] = 'PM: Restoring platform NVS memory'
+		dm['resume_early'] = 'PM: noirq restore of devices complete after.*'
+		dm['resume'] = 'PM: early restore of devices complete after.*'
+		dm['resume_complete'] = 'PM: restore of devices complete after.*'
+	elif(sysvals.suspendmode == 'freeze'):
+		dm['resume_machine'] = 'ACPI: resume from mwait'
 
-	action_start = 0.0
-	for line in lf:
+	# action table (expected events that occur and show up in dmesg)
+	at = {
+		'sync_filesystems': {
+			'smsg': 'PM: Syncing filesystems.*',
+			'emsg': 'PM: Preparing system for mem sleep.*' },
+		'freeze_user_processes': {
+			'smsg': 'Freezing user space processes .*',
+			'emsg': 'Freezing remaining freezable tasks.*' },
+		'freeze_tasks': {
+			'smsg': 'Freezing remaining freezable tasks.*',
+			'emsg': 'PM: Entering (?P<mode>[a-z,A-Z]*) sleep.*' },
+		'ACPI prepare': {
+			'smsg': 'ACPI: Preparing to enter system sleep state.*',
+			'emsg': 'PM: Saving platform NVS memory.*' },
+		'PM vns': {
+			'smsg': 'PM: Saving platform NVS memory.*',
+			'emsg': 'Disabling non-boot CPUs .*' },
+	}
+
+	t0 = -1.0
+	cpu_start = -1.0
+	prevktime = -1.0
+	actions = dict()
+	for line in data.dmesgtext:
 		# -- preprocessing --
 		# parse each dmesg line into the time and message
-		m = re.match(r".*(\[ *)(?P<ktime>[0-9\.]*)(\]) (?P<msg>.*)", line)
+		m = re.match('[ \t]*(\[ *)(?P<ktime>[0-9\.]*)(\]) (?P<msg>.*)', line)
 		if(m):
-			ktime = float(m.group("ktime"))
-			msg = m.group("msg")
+			val = m.group('ktime')
+			try:
+				ktime = float(val)
+			except:
+				doWarning('INVALID DMESG LINE: '+\
+					line.replace('\n', ''), 'dmesg')
+				continue
+			msg = m.group('msg')
+			# initialize data start to first line time
+			if t0 < 0:
+				data.setStart(ktime)
+				t0 = ktime
 		else:
-			print line
 			continue
 
-		# -- phase changes --
-		# suspend_general start
-		if(re.match(dm['suspend_general'], msg)):
-			phase = "suspend_general"
+		# hack for determining resume_machine end for freeze
+		if(not sysvals.usetraceevents and sysvals.suspendmode == 'freeze' \
+			and phase == 'resume_machine' and \
+			re.match('calling  (?P<f>.*)\+ @ .*, parent: .*', msg)):
+			data.dmesg['resume_machine']['end'] = ktime
+			phase = 'resume_noirq'
 			data.dmesg[phase]['start'] = ktime
-			data.start = ktime
-			# action start: syncing filesystems
-			action_start = ktime
-		# suspend_early start
-		elif(re.match(dm['suspend_early'], msg)):
-			data.dmesg["suspend_general"]['end'] = ktime
-			phase = "suspend_early"
+
+		# -- phase changes --
+		# suspend start
+		if(re.match(dm['suspend_prepare'], msg)):
+			phase = 'suspend_prepare'
+			data.dmesg[phase]['start'] = ktime
+			data.setStart(ktime)
+		# suspend start
+		elif(re.match(dm['suspend'], msg)):
+			data.dmesg['suspend_prepare']['end'] = ktime
+			phase = 'suspend'
+			data.dmesg[phase]['start'] = ktime
+		# suspend_late start
+		elif(re.match(dm['suspend_late'], msg)):
+			data.dmesg['suspend']['end'] = ktime
+			phase = 'suspend_late'
 			data.dmesg[phase]['start'] = ktime
 		# suspend_noirq start
 		elif(re.match(dm['suspend_noirq'], msg)):
-			data.dmesg["suspend_early"]['end'] = ktime
-			phase = "suspend_noirq"
+			data.dmesg['suspend_late']['end'] = ktime
+			phase = 'suspend_noirq'
 			data.dmesg[phase]['start'] = ktime
-		# suspend_cpu start
-		elif(re.match(dm['suspend_cpu'], msg)):
-			data.dmesg["suspend_noirq"]['end'] = ktime
-			phase = "suspend_cpu"
+		# suspend_machine start
+		elif(re.match(dm['suspend_machine'], msg)):
+			data.dmesg['suspend_noirq']['end'] = ktime
+			phase = 'suspend_machine'
 			data.dmesg[phase]['start'] = ktime
-		# resume_cpu start
-		elif(re.match(dm['resume_cpu'], msg)):
-			data.tSuspended = ktime
-			data.dmesg["suspend_cpu"]['end'] = ktime
-			phase = "resume_cpu"
+		# resume_machine start
+		elif(re.match(dm['resume_machine'], msg)):
+			if(sysvals.suspendmode in ['freeze', 'standby']):
+				data.tSuspended = prevktime
+				data.dmesg['suspend_machine']['end'] = prevktime
+			else:
+				data.tSuspended = ktime
+				data.dmesg['suspend_machine']['end'] = ktime
+			phase = 'resume_machine'
+			data.tResumed = ktime
+			data.tLow = data.tResumed - data.tSuspended
 			data.dmesg[phase]['start'] = ktime
 		# resume_noirq start
 		elif(re.match(dm['resume_noirq'], msg)):
-			data.dmesg["resume_cpu"]['end'] = ktime
-			phase = "resume_noirq"
+			data.dmesg['resume_machine']['end'] = ktime
+			phase = 'resume_noirq'
 			data.dmesg[phase]['start'] = ktime
-			# action end: ACPI resume
-			data.newAction("resume_cpu", "ACPI", -1, "", action_start, ktime)
 		# resume_early start
 		elif(re.match(dm['resume_early'], msg)):
-			data.dmesg["resume_noirq"]['end'] = ktime
-			phase = "resume_early"
+			data.dmesg['resume_noirq']['end'] = ktime
+			phase = 'resume_early'
 			data.dmesg[phase]['start'] = ktime
-		# resume_general start
-		elif(re.match(dm['resume_general'], msg)):
-			data.dmesg["resume_early"]['end'] = ktime
-			phase = "resume_general"
+		# resume start
+		elif(re.match(dm['resume'], msg)):
+			data.dmesg['resume_early']['end'] = ktime
+			phase = 'resume'
 			data.dmesg[phase]['start'] = ktime
 		# resume complete start
 		elif(re.match(dm['resume_complete'], msg)):
-			data.dmesg["resume_general"]['end'] = ktime
-			data.end = ktime
-			phase = "resume_runtime"
+			data.dmesg['resume']['end'] = ktime
+			phase = 'resume_complete'
+			data.dmesg[phase]['start'] = ktime
+		# post resume start
+		elif(re.match(dm['post_resume'], msg)):
+			data.dmesg['resume_complete']['end'] = ktime
+			data.setEnd(ktime)
+			phase = 'post_resume'
 			break
 
 		# -- device callbacks --
 		if(phase in data.phases):
 			# device init call
-			if(re.match(r"calling  (?P<f>.*)\+ @ .*, parent: .*", msg)):
-				sm = re.match(r"calling  (?P<f>.*)\+ @ (?P<n>.*), parent: (?P<p>.*)", msg);
-				f = sm.group("f")
-				n = sm.group("n")
-				p = sm.group("p")
+			if(re.match('calling  (?P<f>.*)\+ @ .*, parent: .*', msg)):
+				sm = re.match('calling  (?P<f>.*)\+ @ '+\
+					'(?P<n>.*), parent: (?P<p>.*)', msg);
+				f = sm.group('f')
+				n = sm.group('n')
+				p = sm.group('p')
 				if(f and n and p):
-					data.newAction(phase, f, int(n), p, ktime, -1)
+					data.newAction(phase, f, int(n), p, ktime, -1, '')
 			# device init return
-			elif(re.match(r"call (?P<f>.*)\+ returned .* after (?P<t>.*) usecs", msg)):
-				sm = re.match(r"call (?P<f>.*)\+ returned .* after (?P<t>.*) usecs(?P<a>.*)", msg);
-				f = sm.group("f")
-				t = sm.group("t")
+			elif(re.match('call (?P<f>.*)\+ returned .* after '+\
+				'(?P<t>.*) usecs', msg)):
+				sm = re.match('call (?P<f>.*)\+ returned .* after '+\
+					'(?P<t>.*) usecs(?P<a>.*)', msg);
+				f = sm.group('f')
+				t = sm.group('t')
 				list = data.dmesg[phase]['list']
 				if(f in list):
 					dev = list[f]
 					dev['length'] = int(t)
 					dev['end'] = ktime
-					data.vprint("%15s [%f - %f] %s(%d) %s" %
-						(phase, dev['start'], dev['end'], f, dev['pid'], dev['par']))
 
-		# -- phase specific actions --
-		if(phase == "suspend_general"):
-			if(re.match(r"PM: Preparing system for mem sleep.*", msg)):
-				data.newAction(phase, "filesystem-sync", -1, "", action_start, ktime)
-			elif(re.match(r"Freezing user space processes .*", msg)):
-				action_start = ktime
-			elif(re.match(r"Freezing remaining freezable tasks.*", msg)):
-				data.newAction(phase, "freeze-user-processes", -1, "", action_start, ktime)
-				action_start = ktime
-			elif(re.match(r"PM: Entering (?P<mode>[a-z,A-Z]*) sleep.*", msg)):
-				data.newAction(phase, "freeze-tasks", -1, "", action_start, ktime)
-		elif(phase == "suspend_cpu"):
-			m = re.match(r"smpboot: CPU (?P<cpu>[0-9]*) is now offline", msg)
-			if(m):
-				cpu = "CPU"+m.group("cpu")
-				data.newAction(phase, cpu, -1, "", action_start, ktime)
-				action_start = ktime
-			elif(re.match(r"ACPI: Preparing to enter system sleep state.*", msg)):
-				action_start = ktime
-			elif(re.match(r"Disabling non-boot CPUs .*", msg)):
-				data.newAction(phase, "ACPI", -1, "", action_start, ktime)
-				action_start = ktime
-		elif(phase == "resume_cpu"):
-			m = re.match(r"CPU(?P<cpu>[0-9]*) is up", msg)
-			if(m):
-				cpu = "CPU"+m.group("cpu")
-				data.newAction(phase, cpu, -1, "", action_start, ktime)
-				action_start = ktime
-			elif(re.match(r"Enabling non-boot CPUs .*", msg)):
-				action_start = ktime
+		# -- non-devicecallback actions --
+		# if trace events are not available, these are better than nothing
+		if(not sysvals.usetraceevents):
+			# look for known actions
+			for a in at:
+				if(re.match(at[a]['smsg'], msg)):
+					if(a not in actions):
+						actions[a] = []
+					actions[a].append({'begin': ktime, 'end': ktime})
+				if(re.match(at[a]['emsg'], msg)):
+					actions[a][-1]['end'] = ktime
+			# now look for CPU on/off events
+			if(re.match('Disabling non-boot CPUs .*', msg)):
+				# start of first cpu suspend
+				cpu_start = ktime
+			elif(re.match('Enabling non-boot CPUs .*', msg)):
+				# start of first cpu resume
+				cpu_start = ktime
+			elif(re.match('smpboot: CPU (?P<cpu>[0-9]*) is now offline', msg)):
+				# end of a cpu suspend, start of the next
+				m = re.match('smpboot: CPU (?P<cpu>[0-9]*) is now offline', msg)
+				cpu = 'CPU'+m.group('cpu')
+				if(cpu not in actions):
+					actions[cpu] = []
+				actions[cpu].append({'begin': cpu_start, 'end': ktime})
+				cpu_start = ktime
+			elif(re.match('CPU(?P<cpu>[0-9]*) is up', msg)):
+				# end of a cpu resume, start of the next
+				m = re.match('CPU(?P<cpu>[0-9]*) is up', msg)
+				cpu = 'CPU'+m.group('cpu')
+				if(cpu not in actions):
+					actions[cpu] = []
+				actions[cpu].append({'begin': cpu_start, 'end': ktime})
+				cpu_start = ktime
+		prevktime = ktime
 
 	# fill in any missing phases
-	lp = "suspend_general"
+	lp = data.phases[0]
 	for p in data.phases:
-		if(p == "suspend_general"):
-			continue
+		if(data.dmesg[p]['start'] < 0 and data.dmesg[p]['end'] < 0):
+			print('WARNING: phase "%s" is missing, something went wrong!' % p)
+			print('    In %s, this dmesg line denotes the start of %s:' % \
+				(sysvals.suspendmode, p))
+			print('        "%s"' % dm[p])
 		if(data.dmesg[p]['start'] < 0):
 			data.dmesg[p]['start'] = data.dmesg[lp]['end']
-			if(p == "resume_cpu"):
+			if(p == 'resume_machine'):
 				data.tSuspended = data.dmesg[lp]['end']
+				data.tResumed = data.dmesg[lp]['end']
+				data.tLow = 0
 		if(data.dmesg[p]['end'] < 0):
 			data.dmesg[p]['end'] = data.dmesg[p]['start']
 		lp = p
 
+	# fill in any actions we've found
+	for name in actions:
+		for event in actions[name]:
+			begin = event['begin']
+			end = event['end']
+			# if event starts before timeline start, expand timeline
+			if(begin < data.start):
+				data.setStart(begin)
+			# if event ends after timeline end, expand the timeline
+			if(end > data.end):
+				data.setEnd(end)
+			data.newActionGlobal(name, begin, end)
+
+	if(sysvals.verbose):
+		data.printDetails()
+	if(len(sysvals.devicefilter) > 0):
+		data.deviceFilter(sysvals.devicefilter)
 	data.fixupInitcallsThatDidntReturn()
 	return True
 
 # Function: setTimelineRows
 # Description:
-#	 Organize the device or thread lists into the smallest
+#	 Organize the timeline entries into the smallest
 #	 number of rows possible, with no entry overlapping
 # Arguments:
-#	 list: the list to sort (dmesg or ftrace)
-#	 sortedkeys: sorted key list to use
+#	 list: the list of devices/actions for a single phase
+#	 sortedkeys: cronologically sorted key list to use
+# Output:
+#	 The total number of rows needed to display this phase of the timeline
 def setTimelineRows(list, sortedkeys):
-	global data
 
 	# clear all rows and set them to undefined
 	remaining = len(list)
@@ -791,7 +1959,8 @@
 				for ritem in rowdata[row]:
 					rs = ritem['start']
 					re = ritem['end']
-					if(not (((s <= rs) and (e <= rs)) or ((s >= re) and (e >= re)))):
+					if(not (((s <= rs) and (e <= rs)) or
+						((s >= re) and (e >= re)))):
 						valid = False
 						break
 				if(valid):
@@ -803,14 +1972,15 @@
 
 # Function: createTimeScale
 # Description:
-#	 Create timescale lines for the dmesg and ftrace timelines
+#	 Create the timescale header for the html timeline
 # Arguments:
 #	 t0: start time (suspend begin)
 #	 tMax: end time (resume end)
-#	 tSuspend: time when suspend occurs
+#	 tSuspend: time when suspend occurs, i.e. the zero time
+# Output:
+#	 The html code needed to display the time scale
 def createTimeScale(t0, tMax, tSuspended):
-	global data
-	timescale = "<div class=\"t\" style=\"right:{0}%\">{1}</div>\n"
+	timescale = '<div class="t" style="right:{0}%">{1}</div>\n'
 	output = '<div id="timescale">\n'
 
 	# set scale for timeline
@@ -822,11 +1992,11 @@
 		tS = 1
 	if(tSuspended < 0):
 		for i in range(int(tTotal/tS)+1):
-			pos = "%0.3f" % (100 - ((float(i)*tS*100)/tTotal))
+			pos = '%0.3f' % (100 - ((float(i)*tS*100)/tTotal))
 			if(i > 0):
-				val = "%0.f" % (float(i)*tS*1000)
+				val = '%0.fms' % (float(i)*tS*1000)
 			else:
-				val = ""
+				val = ''
 			output += timescale.format(pos, val)
 	else:
 		tSuspend = tSuspended - t0
@@ -834,69 +2004,253 @@
 		divSuspend = int(tSuspend/tS)
 		s0 = (tSuspend - tS*divSuspend)*100/tTotal
 		for i in range(divTotal):
-			pos = "%0.3f" % (100 - ((float(i)*tS*100)/tTotal) - s0)
+			pos = '%0.3f' % (100 - ((float(i)*tS*100)/tTotal) - s0)
 			if((i == 0) and (s0 < 3)):
-				val = ""
+				val = ''
 			elif(i == divSuspend):
-				val = "S/R"
+				val = 'S/R'
 			else:
-				val = "%0.f" % (float(i-divSuspend)*tS*1000)
+				val = '%0.fms' % (float(i-divSuspend)*tS*1000)
 			output += timescale.format(pos, val)
 	output += '</div>\n'
 	return output
 
+# Function: createHTMLSummarySimple
+# Description:
+#	 Create summary html file for a series of tests
+# Arguments:
+#	 testruns: array of Data objects from parseTraceLog
+def createHTMLSummarySimple(testruns, htmlfile):
+	global sysvals
+
+	# print out the basic summary of all the tests
+	hf = open(htmlfile, 'w')
+
+	# write the html header first (html head, css code, up to body start)
+	html = '<!DOCTYPE html>\n<html>\n<head>\n\
+	<meta http-equiv="content-type" content="text/html; charset=UTF-8">\n\
+	<title>AnalyzeSuspend Summary</title>\n\
+	<style type=\'text/css\'>\n\
+		body {overflow-y: scroll;}\n\
+		.stamp {width: 100%;text-align:center;background-color:#495E09;line-height:30px;color:white;font: 25px Arial;}\n\
+		table {width:100%;border-collapse: collapse;}\n\
+		.summary {font: 22px Arial;border:1px solid;}\n\
+		th {border: 1px solid black;background-color:#A7C942;color:white;}\n\
+		td {text-align: center;}\n\
+		tr.alt td {background-color:#EAF2D3;}\n\
+		tr.avg td {background-color:#BDE34C;}\n\
+		a:link {color: #90B521;}\n\
+		a:visited {color: #495E09;}\n\
+		a:hover {color: #B1DF28;}\n\
+		a:active {color: #FFFFFF;}\n\
+	</style>\n</head>\n<body>\n'
+
+	# group test header
+	count = len(testruns)
+	headline_stamp = '<div class="stamp">{0} {1} {2} {3} ({4} tests)</div>\n'
+	html += headline_stamp.format(sysvals.stamp['host'],
+		sysvals.stamp['kernel'], sysvals.stamp['mode'],
+		sysvals.stamp['time'], count)
+
+	# check to see if all the tests have the same value
+	stampcolumns = False
+	for data in testruns:
+		if diffStamp(sysvals.stamp, data.stamp):
+			stampcolumns = True
+			break
+
+	th = '\t<th>{0}</th>\n'
+	td = '\t<td>{0}</td>\n'
+	tdlink = '\t<td><a href="{0}">Click Here</a></td>\n'
+
+	# table header
+	html += '<table class="summary">\n<tr>\n'
+	html += th.format("Test #")
+	if stampcolumns:
+		html += th.format("Hostname")
+		html += th.format("Kernel Version")
+		html += th.format("Suspend Mode")
+	html += th.format("Test Time")
+	html += th.format("Suspend Time")
+	html += th.format("Resume Time")
+	html += th.format("Detail")
+	html += '</tr>\n'
+
+	# test data, 1 row per test
+	sTimeAvg = 0.0
+	rTimeAvg = 0.0
+	num = 1
+	for data in testruns:
+		# data.end is the end of post_resume
+		resumeEnd = data.dmesg['resume_complete']['end']
+		if num % 2 == 1:
+			html += '<tr class="alt">\n'
+		else:
+			html += '<tr>\n'
+
+		# test num
+		html += td.format("test %d" % num)
+		num += 1
+		if stampcolumns:
+			# host name
+			val = "unknown"
+			if('host' in data.stamp):
+				val = data.stamp['host']
+			html += td.format(val)
+			# host kernel
+			val = "unknown"
+			if('kernel' in data.stamp):
+				val = data.stamp['kernel']
+			html += td.format(val)
+			# suspend mode
+			val = "unknown"
+			if('mode' in data.stamp):
+				val = data.stamp['mode']
+			html += td.format(val)
+		# test time
+		val = "unknown"
+		if('time' in data.stamp):
+			val = data.stamp['time']
+		html += td.format(val)
+		# suspend time
+		sTime = (data.tSuspended - data.start)*1000
+		sTimeAvg += sTime
+		html += td.format("%3.3f ms" % sTime)
+		# resume time
+		rTime = (resumeEnd - data.tResumed)*1000
+		rTimeAvg += rTime
+		html += td.format("%3.3f ms" % rTime)
+		# link to the output html
+		html += tdlink.format(data.outfile)
+
+		html += '</tr>\n'
+
+	# last line: test average
+	if(count > 0):
+		sTimeAvg /= count
+		rTimeAvg /= count
+	html += '<tr class="avg">\n'
+	html += td.format('Average') 	# name
+	if stampcolumns:
+		html += td.format('')			# host
+		html += td.format('')			# kernel
+		html += td.format('')			# mode
+	html += td.format('')			# time
+	html += td.format("%3.3f ms" % sTimeAvg)	# suspend time
+	html += td.format("%3.3f ms" % rTimeAvg)	# resume time
+	html += td.format('')			# output link
+	html += '</tr>\n'
+
+	# flush the data to file
+	hf.write(html+'</table>\n')
+	hf.write('</body>\n</html>\n')
+	hf.close()
+
 # Function: createHTML
 # Description:
-#	 Create the output html file.
-def createHTML():
-	global sysvals, data
+#	 Create the output html file from the resident test data
+# Arguments:
+#	 testruns: array of Data objects from parseKernelLog or parseTraceLog
+# Output:
+#	 True if the html file was created, false if it failed
+def createHTML(testruns):
+	global sysvals
 
-	data.normalizeTime()
+	for data in testruns:
+		data.normalizeTime(testruns[-1].tSuspended)
 
+	x2changes = ['', 'absolute']
+	if len(testruns) > 1:
+		x2changes = ['1', 'relative']
 	# html function templates
 	headline_stamp = '<div class="stamp">{0} {1} {2} {3}</div>\n'
-	html_zoombox = '<center><button id="zoomin">ZOOM IN</button><button id="zoomout">ZOOM OUT</button><button id="zoomdef">ZOOM 1:1</button></center>\n<div id="dmesgzoombox" class="zoombox">\n'
-	html_timeline = '<div id="{0}" class="timeline" style="height:{1}px">\n'
+	html_devlist1 = '<button id="devlist1" class="devlist" style="float:left;">Device Detail%s</button>' % x2changes[0]
+	html_zoombox = '<center><button id="zoomin">ZOOM IN</button><button id="zoomout">ZOOM OUT</button><button id="zoomdef">ZOOM 1:1</button></center>\n'
+	html_devlist2 = '<button id="devlist2" class="devlist" style="float:right;">Device Detail2</button>\n'
+	html_timeline = '<div id="dmesgzoombox" class="zoombox">\n<div id="{0}" class="timeline" style="height:{1}px">\n'
 	html_device = '<div id="{0}" title="{1}" class="thread" style="left:{2}%;top:{3}%;height:{4}%;width:{5}%;">{6}</div>\n'
+	html_traceevent = '<div title="{0}" class="traceevent" style="left:{1}%;top:{2}%;height:{3}%;width:{4}%;border:1px solid {5};background-color:{5}">{6}</div>\n'
 	html_phase = '<div class="phase" style="left:{0}%;width:{1}%;top:{2}%;height:{3}%;background-color:{4}">{5}</div>\n'
+	html_phaselet = '<div id="{0}" class="phaselet" style="left:{1}%;width:{2}%;background-color:{3}"></div>\n'
 	html_legend = '<div class="square" style="left:{0}%;background-color:{1}">&nbsp;{2}</div>\n'
 	html_timetotal = '<table class="time1">\n<tr>'\
-		'<td class="gray">{2} Suspend Time: <b>{0} ms</b></td>'\
-		'<td class="gray">{2} Resume Time: <b>{1} ms</b></td>'\
+		'<td class="green">{2} Suspend Time: <b>{0} ms</b></td>'\
+		'<td class="yellow">{2} Resume Time: <b>{1} ms</b></td>'\
+		'</tr>\n</table>\n'
+	html_timetotal2 = '<table class="time1">\n<tr>'\
+		'<td class="green">{3} Suspend Time: <b>{0} ms</b></td>'\
+		'<td class="gray">'+sysvals.suspendmode+' time: <b>{1} ms</b></td>'\
+		'<td class="yellow">{3} Resume Time: <b>{2} ms</b></td>'\
 		'</tr>\n</table>\n'
 	html_timegroups = '<table class="time2">\n<tr>'\
-		'<td class="green">Kernel Suspend: {0} ms</td>'\
-		'<td class="purple">Firmware Suspend: {1} ms</td>'\
-		'<td class="purple">Firmware Resume: {2} ms</td>'\
-		'<td class="yellow">Kernel Resume: {3} ms</td>'\
+		'<td class="green">{4}Kernel Suspend: {0} ms</td>'\
+		'<td class="purple">{4}Firmware Suspend: {1} ms</td>'\
+		'<td class="purple">{4}Firmware Resume: {2} ms</td>'\
+		'<td class="yellow">{4}Kernel Resume: {3} ms</td>'\
 		'</tr>\n</table>\n'
 
-	# device timeline (dmesg)
-	if(data.usedmesg):
-		data.vprint("Creating Device Timeline...")
-		devtl = Timeline()
+	# device timeline
+	vprint('Creating Device Timeline...')
+	devtl = Timeline()
 
-		# Generate the header for this timeline
-		t0 = data.start
-		tMax = data.end
-		tTotal = tMax - t0
+	# Generate the header for this timeline
+	textnum = ['First', 'Second']
+	for data in testruns:
+		tTotal = data.end - data.start
+		tEnd = data.dmesg['resume_complete']['end']
 		if(tTotal == 0):
-			print("ERROR: No timeline data")
+			print('ERROR: No timeline data')
 			sys.exit()
-		suspend_time = "%.0f"%(-data.start*1000)
-		resume_time = "%.0f"%(data.end*1000)
+		if(data.tLow > 0):
+			low_time = '%.0f'%(data.tLow*1000)
 		if data.fwValid:
-			devtl.html['timeline'] = html_timetotal.format(suspend_time, resume_time, "Total")
-			sktime = "%.3f"%((data.dmesg['suspend_cpu']['end'] - data.dmesg['suspend_general']['start'])*1000)
-			sftime = "%.3f"%(data.fwSuspend / 1000000.0)
-			rftime = "%.3f"%(data.fwResume / 1000000.0)
-			rktime = "%.3f"%((data.dmesg['resume_general']['end'] - data.dmesg['resume_cpu']['start'])*1000)
-			devtl.html['timeline'] += html_timegroups.format(sktime, sftime, rftime, rktime)
+			suspend_time = '%.0f'%((data.tSuspended-data.start)*1000 + \
+				(data.fwSuspend/1000000.0))
+			resume_time = '%.0f'%((tEnd-data.tSuspended)*1000 + \
+				(data.fwResume/1000000.0))
+			testdesc1 = 'Total'
+			testdesc2 = ''
+			if(len(testruns) > 1):
+				testdesc1 = testdesc2 = textnum[data.testnumber]
+				testdesc2 += ' '
+			if(data.tLow == 0):
+				thtml = html_timetotal.format(suspend_time, \
+					resume_time, testdesc1)
+			else:
+				thtml = html_timetotal2.format(suspend_time, low_time, \
+					resume_time, testdesc1)
+			devtl.html['timeline'] += thtml
+			sktime = '%.3f'%((data.dmesg['suspend_machine']['end'] - \
+				data.getStart())*1000)
+			sftime = '%.3f'%(data.fwSuspend / 1000000.0)
+			rftime = '%.3f'%(data.fwResume / 1000000.0)
+			rktime = '%.3f'%((data.getEnd() - \
+				data.dmesg['resume_machine']['start'])*1000)
+			devtl.html['timeline'] += html_timegroups.format(sktime, \
+				sftime, rftime, rktime, testdesc2)
 		else:
-			devtl.html['timeline'] = html_timetotal.format(suspend_time, resume_time, "Kernel")
+			suspend_time = '%.0f'%((data.tSuspended-data.start)*1000)
+			resume_time = '%.0f'%((tEnd-data.tSuspended)*1000)
+			testdesc = 'Kernel'
+			if(len(testruns) > 1):
+				testdesc = textnum[data.testnumber]+' '+testdesc
+			if(data.tLow == 0):
+				thtml = html_timetotal.format(suspend_time, \
+					resume_time, testdesc)
+			else:
+				thtml = html_timetotal2.format(suspend_time, low_time, \
+					resume_time, testdesc)
+			devtl.html['timeline'] += thtml
 
-		# determine the maximum number of rows we need to draw
-		timelinerows = 0
+	# time scale for potentially multiple datasets
+	t0 = testruns[0].start
+	tMax = testruns[-1].end
+	tSuspended = testruns[-1].tSuspended
+	tTotal = tMax - t0
+
+	# determine the maximum number of rows we need to draw
+	timelinerows = 0
+	for data in testruns:
 		for phase in data.dmesg:
 			list = data.dmesg[phase]['list']
 			rows = setTimelineRows(list, list)
@@ -904,62 +2258,104 @@
 			if(rows > timelinerows):
 				timelinerows = rows
 
-		# calculate the timeline height and create its bounding box
-		devtl.setRows(timelinerows + 1)
-		devtl.html['timeline'] += html_zoombox;
-		devtl.html['timeline'] += html_timeline.format("dmesg", devtl.height);
+	# calculate the timeline height and create bounding box, add buttons
+	devtl.setRows(timelinerows + 1)
+	devtl.html['timeline'] += html_devlist1
+	if len(testruns) > 1:
+		devtl.html['timeline'] += html_devlist2
+	devtl.html['timeline'] += html_zoombox
+	devtl.html['timeline'] += html_timeline.format('dmesg', devtl.height)
 
-		# draw the colored boxes for each of the phases
+	# draw the colored boxes for each of the phases
+	for data in testruns:
 		for b in data.dmesg:
 			phase = data.dmesg[b]
-			left = "%.3f" % (((phase['start']-data.start)*100)/tTotal)
-			width = "%.3f" % (((phase['end']-phase['start'])*100)/tTotal)
-			devtl.html['timeline'] += html_phase.format(left, width, "%.3f"%devtl.scaleH, "%.3f"%(100-devtl.scaleH), data.dmesg[b]['color'], "")
+			length = phase['end']-phase['start']
+			left = '%.3f' % (((phase['start']-t0)*100.0)/tTotal)
+			width = '%.3f' % ((length*100.0)/tTotal)
+			devtl.html['timeline'] += html_phase.format(left, width, \
+				'%.3f'%devtl.scaleH, '%.3f'%(100-devtl.scaleH), \
+				data.dmesg[b]['color'], '')
 
-		# draw the time scale, try to make the number of labels readable
-		devtl.html['scale'] = createTimeScale(t0, tMax, data.tSuspended)
-		devtl.html['timeline'] += devtl.html['scale']
+	# draw the time scale, try to make the number of labels readable
+	devtl.html['scale'] = createTimeScale(t0, tMax, tSuspended)
+	devtl.html['timeline'] += devtl.html['scale']
+	for data in testruns:
 		for b in data.dmesg:
 			phaselist = data.dmesg[b]['list']
 			for d in phaselist:
 				name = d
-				if(d in data.altdevname):
-					name = data.altdevname[d]
+				drv = ''
 				dev = phaselist[d]
+				if(d in sysvals.altdevname):
+					name = sysvals.altdevname[d]
+				if('drv' in dev and dev['drv']):
+					drv = ' {%s}' % dev['drv']
 				height = (100.0 - devtl.scaleH)/data.dmesg[b]['row']
-				top = "%.3f" % ((dev['row']*height) + devtl.scaleH)
-				left = "%.3f" % (((dev['start']-data.start)*100)/tTotal)
-				width = "%.3f" % (((dev['end']-dev['start'])*100)/tTotal)
-				len = " (%0.3f ms) " % ((dev['end']-dev['start'])*1000)
-				color = "rgba(204,204,204,0.5)"
-				devtl.html['timeline'] += html_device.format(dev['id'], name+len+b, left, top, "%.3f"%height, width, name)
+				top = '%.3f' % ((dev['row']*height) + devtl.scaleH)
+				left = '%.3f' % (((dev['start']-t0)*100)/tTotal)
+				width = '%.3f' % (((dev['end']-dev['start'])*100)/tTotal)
+				length = ' (%0.3f ms) ' % ((dev['end']-dev['start'])*1000)
+				color = 'rgba(204,204,204,0.5)'
+				devtl.html['timeline'] += html_device.format(dev['id'], \
+					d+drv+length+b, left, top, '%.3f'%height, width, name+drv)
 
-		# timeline is finished
-		devtl.html['timeline'] += "</div>\n</div>\n"
+	# draw any trace events found
+	for data in testruns:
+		for b in data.dmesg:
+			phaselist = data.dmesg[b]['list']
+			for name in phaselist:
+				dev = phaselist[name]
+				if('traceevents' in dev):
+					vprint('Debug trace events found for device %s' % name)
+					vprint('%20s %20s %10s %8s' % ('action', \
+						'name', 'time(ms)', 'length(ms)'))
+					for e in dev['traceevents']:
+						vprint('%20s %20s %10.3f %8.3f' % (e.action, \
+							e.name, e.time*1000, e.length*1000))
+						height = (100.0 - devtl.scaleH)/data.dmesg[b]['row']
+						top = '%.3f' % ((dev['row']*height) + devtl.scaleH)
+						left = '%.3f' % (((e.time-t0)*100)/tTotal)
+						width = '%.3f' % (e.length*100/tTotal)
+						color = 'rgba(204,204,204,0.5)'
+						devtl.html['timeline'] += \
+							html_traceevent.format(e.action+' '+e.name, \
+								left, top, '%.3f'%height, \
+								width, e.color, '')
 
-		# draw a legend which describes the phases by color
-		devtl.html['legend'] = "<div class=\"legend\">\n"
-		pdelta = 100.0/data.phases.__len__()
-		pmargin = pdelta / 4.0
-		for phase in data.phases:
-			order = "%.2f" % ((data.dmesg[phase]['order'] * pdelta) + pmargin)
-			name = string.replace(phase, "_", " &nbsp;")
-			devtl.html['legend'] += html_legend.format(order, data.dmesg[phase]['color'], name)
-		devtl.html['legend'] += "</div>\n"
+	# timeline is finished
+	devtl.html['timeline'] += '</div>\n</div>\n'
+
+	# draw a legend which describes the phases by color
+	data = testruns[-1]
+	devtl.html['legend'] = '<div class="legend">\n'
+	pdelta = 100.0/len(data.phases)
+	pmargin = pdelta / 4.0
+	for phase in data.phases:
+		order = '%.2f' % ((data.dmesg[phase]['order'] * pdelta) + pmargin)
+		name = string.replace(phase, '_', ' &nbsp;')
+		devtl.html['legend'] += html_legend.format(order, \
+			data.dmesg[phase]['color'], name)
+	devtl.html['legend'] += '</div>\n'
 
 	hf = open(sysvals.htmlfile, 'w')
 	thread_height = 0
 
-	# write the html header first (html head, css code, everything up to the start of body)
-	html_header = "<!DOCTYPE html>\n<html>\n<head>\n\
-	<meta http-equiv=\"content-type\" content=\"text/html; charset=UTF-8\">\n\
+	# write the html header first (html head, css code, up to body start)
+	html_header = '<!DOCTYPE html>\n<html>\n<head>\n\
+	<meta http-equiv="content-type" content="text/html; charset=UTF-8">\n\
 	<title>AnalyzeSuspend</title>\n\
-	<style type='text/css'>\n\
+	<style type=\'text/css\'>\n\
 		body {overflow-y: scroll;}\n\
 		.stamp {width: 100%;text-align:center;background-color:gray;line-height:30px;color:white;font: 25px Arial;}\n\
 		.callgraph {margin-top: 30px;box-shadow: 5px 5px 20px black;}\n\
 		.callgraph article * {padding-left: 28px;}\n\
 		h1 {color:black;font: bold 30px Times;}\n\
+		t0 {color:black;font: bold 30px Times;}\n\
+		t1 {color:black;font: 30px Times;}\n\
+		t2 {color:black;font: 25px Times;}\n\
+		t3 {color:black;font: 20px Times;white-space:nowrap;}\n\
+		t4 {color:black;font: bold 30px Times;line-height:60px;white-space:nowrap;}\n\
 		table {width:100%;}\n\
 		.gray {background-color:rgba(80,80,80,0.1);}\n\
 		.green {background-color:rgba(204,255,204,0.4);}\n\
@@ -968,38 +2364,58 @@
 		.time1 {font: 22px Arial;border:1px solid;}\n\
 		.time2 {font: 15px Arial;border-bottom:1px solid;border-left:1px solid;border-right:1px solid;}\n\
 		td {text-align: center;}\n\
+		r {color:#500000;font:15px Tahoma;}\n\
+		n {color:#505050;font:15px Tahoma;}\n\
 		.tdhl {color: red;}\n\
 		.hide {display: none;}\n\
 		.pf {display: none;}\n\
-		.pf:checked + label {background: url(\'data:image/svg+xml;utf,<?xml version=\"1.0\" standalone=\"no\"?><svg xmlns=\"http://www.w3.org/2000/svg\" height=\"18\" width=\"18\" version=\"1.1\"><circle cx=\"9\" cy=\"9\" r=\"8\" stroke=\"black\" stroke-width=\"1\" fill=\"white\"/><rect x=\"4\" y=\"8\" width=\"10\" height=\"2\" style=\"fill:black;stroke-width:0\"/><rect x=\"8\" y=\"4\" width=\"2\" height=\"10\" style=\"fill:black;stroke-width:0\"/></svg>\') no-repeat left center;}\n\
-		.pf:not(:checked) ~ label {background: url(\'data:image/svg+xml;utf,<?xml version=\"1.0\" standalone=\"no\"?><svg xmlns=\"http://www.w3.org/2000/svg\" height=\"18\" width=\"18\" version=\"1.1\"><circle cx=\"9\" cy=\"9\" r=\"8\" stroke=\"black\" stroke-width=\"1\" fill=\"white\"/><rect x=\"4\" y=\"8\" width=\"10\" height=\"2\" style=\"fill:black;stroke-width:0\"/></svg>\') no-repeat left center;}\n\
+		.pf:checked + label {background: url(\'data:image/svg+xml;utf,<?xml version="1.0" standalone="no"?><svg xmlns="http://www.w3.org/2000/svg" height="18" width="18" version="1.1"><circle cx="9" cy="9" r="8" stroke="black" stroke-width="1" fill="white"/><rect x="4" y="8" width="10" height="2" style="fill:black;stroke-width:0"/><rect x="8" y="4" width="2" height="10" style="fill:black;stroke-width:0"/></svg>\') no-repeat left center;}\n\
+		.pf:not(:checked) ~ label {background: url(\'data:image/svg+xml;utf,<?xml version="1.0" standalone="no"?><svg xmlns="http://www.w3.org/2000/svg" height="18" width="18" version="1.1"><circle cx="9" cy="9" r="8" stroke="black" stroke-width="1" fill="white"/><rect x="4" y="8" width="10" height="2" style="fill:black;stroke-width:0"/></svg>\') no-repeat left center;}\n\
 		.pf:checked ~ *:not(:nth-child(2)) {display: none;}\n\
 		.zoombox {position: relative; width: 100%; overflow-x: scroll;}\n\
 		.timeline {position: relative; font-size: 14px;cursor: pointer;width: 100%; overflow: hidden; background-color:#dddddd;}\n\
-		.thread {position: absolute; height: "+"%.3f"%thread_height+"%; overflow: hidden; line-height: 30px; border:1px solid;text-align:center;white-space:nowrap;background-color:rgba(204,204,204,0.5);}\n\
+		.thread {position: absolute; height: '+'%.3f'%thread_height+'%; overflow: hidden; line-height: 30px; border:1px solid;text-align:center;white-space:nowrap;background-color:rgba(204,204,204,0.5);}\n\
 		.thread:hover {background-color:white;border:1px solid red;z-index:10;}\n\
+		.hover {background-color:white;border:1px solid red;z-index:10;}\n\
+		.traceevent {position: absolute;opacity: 0.3;height: '+'%.3f'%thread_height+'%;width:0;overflow:hidden;line-height:30px;text-align:center;white-space:nowrap;}\n\
 		.phase {position: absolute;overflow: hidden;border:0px;text-align:center;}\n\
-		.t {position: absolute; top: 0%; height: 100%; border-right:1px solid black;}\n\
+		.phaselet {position:absolute;overflow:hidden;border:0px;text-align:center;height:100px;font-size:24px;}\n\
+		.t {position:absolute;top:0%;height:100%;border-right:1px solid black;}\n\
 		.legend {position: relative; width: 100%; height: 40px; text-align: center;margin-bottom:20px}\n\
 		.legend .square {position:absolute;top:10px; width: 0px;height: 20px;border:1px solid;padding-left:20px;}\n\
 		button {height:40px;width:200px;margin-bottom:20px;margin-top:20px;font-size:24px;}\n\
-	</style>\n</head>\n<body>\n"
+		.devlist {position:'+x2changes[1]+';width:190px;}\n\
+		#devicedetail {height:100px;box-shadow: 5px 5px 20px black;}\n\
+	</style>\n</head>\n<body>\n'
 	hf.write(html_header)
 
 	# write the test title and general info header
-	if(data.stamp['time'] != ""):
-		hf.write(headline_stamp.format(data.stamp['host'],
-			data.stamp['kernel'], data.stamp['mode'], data.stamp['time']))
+	if(sysvals.stamp['time'] != ""):
+		hf.write(headline_stamp.format(sysvals.stamp['host'],
+			sysvals.stamp['kernel'], sysvals.stamp['mode'], \
+				sysvals.stamp['time']))
 
-	# write the dmesg data (device timeline)
-	if(data.usedmesg):
-		hf.write(devtl.html['timeline'])
-		hf.write(devtl.html['legend'])
-		hf.write('<div id="devicedetail"></div>\n')
-		hf.write('<div id="devicetree"></div>\n')
+	# write the device timeline
+	hf.write(devtl.html['timeline'])
+	hf.write(devtl.html['legend'])
+	hf.write('<div id="devicedetailtitle"></div>\n')
+	hf.write('<div id="devicedetail" style="display:none;">\n')
+	# draw the colored boxes for the device detail section
+	for data in testruns:
+		hf.write('<div id="devicedetail%d">\n' % data.testnumber)
+		for b in data.phases:
+			phase = data.dmesg[b]
+			length = phase['end']-phase['start']
+			left = '%.3f' % (((phase['start']-t0)*100.0)/tTotal)
+			width = '%.3f' % ((length*100.0)/tTotal)
+			hf.write(html_phaselet.format(b, left, width, \
+				data.dmesg[b]['color']))
+		hf.write('</div>\n')
+	hf.write('</div>\n')
 
 	# write the ftrace data (callgraph)
-	if(data.useftrace):
+	data = testruns[-1]
+	if(sysvals.usecallgraph):
 		hf.write('<section id="callgraphs" class="callgraph">\n')
 		# write out the ftrace data converted to html
 		html_func_top = '<article id="{0}" class="atop" style="background-color:{1}">\n<input type="checkbox" class="pf" id="f{2}" checked/><label for="f{2}">{3} {4}</label>\n'
@@ -1013,18 +2429,21 @@
 				if('ftrace' not in list[devname]):
 					continue
 				name = devname
-				if(devname in data.altdevname):
-					name = data.altdevname[devname]
+				if(devname in sysvals.altdevname):
+					name = sysvals.altdevname[devname]
 				devid = list[devname]['id']
 				cg = list[devname]['ftrace']
-				flen = "(%.3f ms)" % ((cg.end - cg.start)*1000)
-				hf.write(html_func_top.format(devid, data.dmesg[p]['color'], num, name+" "+p, flen))
+				flen = '<r>(%.3f ms @ %.3f to %.3f)</r>' % \
+					((cg.end - cg.start)*1000, cg.start*1000, cg.end*1000)
+				hf.write(html_func_top.format(devid, data.dmesg[p]['color'], \
+					num, name+' '+p, flen))
 				num += 1
 				for line in cg.list:
 					if(line.length < 0.000000001):
-						flen = ""
+						flen = ''
 					else:
-						flen = "(%.3f ms)" % (line.length*1000)
+						flen = '<n>(%.3f ms @ %.3f)</n>' % (line.length*1000, \
+							line.time*1000)
 					if(line.freturn and line.fcall):
 						hf.write(html_func_leaf.format(line.name, flen))
 					elif(line.freturn):
@@ -1033,96 +2452,31 @@
 						hf.write(html_func_start.format(num, line.name, flen))
 						num += 1
 				hf.write(html_func_end)
-		hf.write("\n\n    </section>\n")
+		hf.write('\n\n    </section>\n')
 	# write the footer and close
-	addScriptCode(hf)
-	hf.write("</body>\n</html>\n")
+	addScriptCode(hf, testruns)
+	hf.write('</body>\n</html>\n')
 	hf.close()
 	return True
 
-def addScriptCode(hf):
-	global data
-
-	t0 = (data.start - data.tSuspended) * 1000
-	tMax = (data.end - data.tSuspended) * 1000
+# Function: addScriptCode
+# Description:
+#	 Adds the javascript code to the output html
+# Arguments:
+#	 hf: the open html file pointer
+#	 testruns: array of Data objects from parseKernelLog or parseTraceLog
+def addScriptCode(hf, testruns):
+	t0 = (testruns[0].start - testruns[-1].tSuspended) * 1000
+	tMax = (testruns[-1].end - testruns[-1].tSuspended) * 1000
 	# create an array in javascript memory with the device details
-	detail = '	var bounds = [%f,%f];\n' % (t0, tMax)
-	detail += '	var d = [];\n'
-	dfmt = '	d["%s"] = { n:"%s", p:"%s", c:[%s] };\n';
-	for p in data.dmesg:
-		list = data.dmesg[p]['list']
-		for d in list:
-			parent = data.deviceParentID(d, p)
-			idlist = data.deviceChildrenIDs(d, p)
-			idstr = ""
-			for i in idlist:
-				if(idstr == ""):
-					idstr += '"'+i+'"'
-				else:
-					idstr += ', '+'"'+i+'"'
-			detail += dfmt % (list[d]['id'], d, parent, idstr)
-
+	detail = '	var devtable = [];\n'
+	for data in testruns:
+		topo = data.deviceTopology()
+		detail += '	devtable[%d] = "%s";\n' % (data.testnumber, topo)
+	detail += '	var bounds = [%f,%f];\n' % (t0, tMax)
 	# add the code which will manipulate the data in the browser
 	script_code = \
 	'<script type="text/javascript">\n'+detail+\
-	'	var filter = [];\n'\
-	'	var table = [];\n'\
-	'	function deviceParent(devid) {\n'\
-	'		var devlist = [];\n'\
-	'		if(filter.indexOf(devid) < 0) filter[filter.length] = devid;\n'\
-	'		if(d[devid].p in d)\n'\
-	'			devlist = deviceParent(d[devid].p);\n'\
-	'		else if(d[devid].p != "")\n'\
-	'			devlist = [d[devid].p];\n'\
-	'		devlist[devlist.length] = d[devid].n;\n'\
-	'		return devlist;\n'\
-	'	}\n'\
-	'	function deviceChildren(devid, column, row) {\n'\
-	'		if(!(devid in d)) return;\n'\
-	'		if(filter.indexOf(devid) < 0) filter[filter.length] = devid;\n'\
-	'		var cell = {name: d[devid].n, span: 1};\n'\
-	'		var span = 0;\n'\
-	'		if(column >= table.length) table[column] = [];\n'\
-	'		table[column][row] = cell;\n'\
-	'		for(var i = 0; i < d[devid].c.length; i++) {\n'\
-	'			var cid = d[devid].c[i];\n'\
-	'			span += deviceChildren(cid, column+1, row+span);\n'\
-	'		}\n'\
-	'		if(span == 0) span = 1;\n'\
-	'		table[column][row].span = span;\n'\
-	'		return span;\n'\
-	'	}\n'\
-	'	function deviceTree(devid, resume) {\n'\
-	'		var html = "<table border=1>";\n'\
-	'		filter = [];\n'\
-	'		table = [];\n'\
-	'		plist = deviceParent(devid);\n'\
-	'		var devidx = plist.length - 1;\n'\
-	'		for(var i = 0; i < devidx; i++)\n'\
-	'			table[i] = [{name: plist[i], span: 1}];\n'\
-	'		deviceChildren(devid, devidx, 0);\n'\
-	'		for(var i = 0; i < devidx; i++)\n'\
-	'			table[i][0].span = table[devidx][0].span;\n'\
-	'		for(var row = 0; row < table[0][0].span; row++) {\n'\
-	'			html += "<tr>";\n'\
-	'			for(var col = 0; col < table.length; col++)\n'\
-	'				if(row in table[col]) {\n'\
-	'					var cell = table[col][row];\n'\
-	'					var args = "";\n'\
-	'					if(cell.span > 1)\n'\
-	'						args += " rowspan="+cell.span;\n'\
-	'					if((col == devidx) && (row == 0))\n'\
-	'						args += " class=tdhl";\n'\
-	'					if(resume)\n'\
-	'						html += "<td"+args+">"+cell.name+" &rarr;</td>";\n'\
-	'					else\n'\
-	'						html += "<td"+args+">&larr; "+cell.name+"</td>";\n'\
-	'				}\n'\
-	'			html += "</tr>";\n'\
-	'		}\n'\
-	'		html += "</table>";\n'\
-	'		return html;\n'\
-	'	}\n'\
 	'	function zoomTimeline() {\n'\
 	'		var timescale = document.getElementById("timescale");\n'\
 	'		var dmesg = document.getElementById("dmesg");\n'\
@@ -1154,35 +2508,170 @@
 	'		for(var s = ((t0 / tS)|0) * tS; s < tMax; s += tS) {\n'\
 	'			var pos = (tMax - s) * 100.0 / tTotal;\n'\
 	'			var name = (s == 0)?"S/R":(s+"ms");\n'\
-	'			html += \"<div class=\\\"t\\\" style=\\\"right:\"+pos+\"%\\\">\"+name+\"</div>\";\n'\
+	'			html += "<div class=\\"t\\" style=\\"right:"+pos+"%\\">"+name+"</div>";\n'\
 	'		}\n'\
 	'		timescale.innerHTML = html;\n'\
 	'	}\n'\
+	'	function deviceHover() {\n'\
+	'		var name = this.title.slice(0, this.title.indexOf(" ("));\n'\
+	'		var dmesg = document.getElementById("dmesg");\n'\
+	'		var dev = dmesg.getElementsByClassName("thread");\n'\
+	'		var cpu = -1;\n'\
+	'		if(name.match("CPU_ON\[[0-9]*\]"))\n'\
+	'			cpu = parseInt(name.slice(7));\n'\
+	'		else if(name.match("CPU_OFF\[[0-9]*\]"))\n'\
+	'			cpu = parseInt(name.slice(8));\n'\
+	'		for (var i = 0; i < dev.length; i++) {\n'\
+	'			dname = dev[i].title.slice(0, dev[i].title.indexOf(" ("));\n'\
+	'			if((cpu >= 0 && dname.match("CPU_O[NF]*\\\[*"+cpu+"\\\]")) ||\n'\
+	'				(name == dname))\n'\
+	'			{\n'\
+	'				dev[i].className = "thread hover";\n'\
+	'			} else {\n'\
+	'				dev[i].className = "thread";\n'\
+	'			}\n'\
+	'		}\n'\
+	'	}\n'\
+	'	function deviceUnhover() {\n'\
+	'		var dmesg = document.getElementById("dmesg");\n'\
+	'		var dev = dmesg.getElementsByClassName("thread");\n'\
+	'		for (var i = 0; i < dev.length; i++) {\n'\
+	'			dev[i].className = "thread";\n'\
+	'		}\n'\
+	'	}\n'\
+	'	function deviceTitle(title, total, cpu) {\n'\
+	'		var prefix = "Total";\n'\
+	'		if(total.length > 3) {\n'\
+	'			prefix = "Average";\n'\
+	'			total[1] = (total[1]+total[3])/2;\n'\
+	'			total[2] = (total[2]+total[4])/2;\n'\
+	'		}\n'\
+	'		var devtitle = document.getElementById("devicedetailtitle");\n'\
+	'		var name = title.slice(0, title.indexOf(" "));\n'\
+	'		if(cpu >= 0) name = "CPU"+cpu;\n'\
+	'		var driver = "";\n'\
+	'		var tS = "<t2>(</t2>";\n'\
+	'		var tR = "<t2>)</t2>";\n'\
+	'		if(total[1] > 0)\n'\
+	'			tS = "<t2>("+prefix+" Suspend:</t2><t0> "+total[1].toFixed(3)+" ms</t0> ";\n'\
+	'		if(total[2] > 0)\n'\
+	'			tR = " <t2>"+prefix+" Resume:</t2><t0> "+total[2].toFixed(3)+" ms<t2>)</t2></t0>";\n'\
+	'		var s = title.indexOf("{");\n'\
+	'		var e = title.indexOf("}");\n'\
+	'		if((s >= 0) && (e >= 0))\n'\
+	'			driver = title.slice(s+1, e) + " <t1>@</t1> ";\n'\
+	'		if(total[1] > 0 && total[2] > 0)\n'\
+	'			devtitle.innerHTML = "<t0>"+driver+name+"</t0> "+tS+tR;\n'\
+	'		else\n'\
+	'			devtitle.innerHTML = "<t0>"+title+"</t0>";\n'\
+	'		return name;\n'\
+	'	}\n'\
 	'	function deviceDetail() {\n'\
-	'		var devtitle = document.getElementById("devicedetail");\n'\
-	'		devtitle.innerHTML = "<h1>"+this.title+"</h1>";\n'\
-	'		var devtree = document.getElementById("devicetree");\n'\
-	'		devtree.innerHTML = deviceTree(this.id, (this.title.indexOf("resume") >= 0));\n'\
+	'		var devinfo = document.getElementById("devicedetail");\n'\
+	'		devinfo.style.display = "block";\n'\
+	'		var name = this.title.slice(0, this.title.indexOf(" ("));\n'\
+	'		var cpu = -1;\n'\
+	'		if(name.match("CPU_ON\[[0-9]*\]"))\n'\
+	'			cpu = parseInt(name.slice(7));\n'\
+	'		else if(name.match("CPU_OFF\[[0-9]*\]"))\n'\
+	'			cpu = parseInt(name.slice(8));\n'\
+	'		var dmesg = document.getElementById("dmesg");\n'\
+	'		var dev = dmesg.getElementsByClassName("thread");\n'\
+	'		var idlist = [];\n'\
+	'		var pdata = [[]];\n'\
+	'		var pd = pdata[0];\n'\
+	'		var total = [0.0, 0.0, 0.0];\n'\
+	'		for (var i = 0; i < dev.length; i++) {\n'\
+	'			dname = dev[i].title.slice(0, dev[i].title.indexOf(" ("));\n'\
+	'			if((cpu >= 0 && dname.match("CPU_O[NF]*\\\[*"+cpu+"\\\]")) ||\n'\
+	'				(name == dname))\n'\
+	'			{\n'\
+	'				idlist[idlist.length] = dev[i].id;\n'\
+	'				var tidx = 1;\n'\
+	'				if(dev[i].id[0] == "a") {\n'\
+	'					pd = pdata[0];\n'\
+	'				} else {\n'\
+	'					if(pdata.length == 1) pdata[1] = [];\n'\
+	'					if(total.length == 3) total[3]=total[4]=0.0;\n'\
+	'					pd = pdata[1];\n'\
+	'					tidx = 3;\n'\
+	'				}\n'\
+	'				var info = dev[i].title.split(" ");\n'\
+	'				var pname = info[info.length-1];\n'\
+	'				pd[pname] = parseFloat(info[info.length-3].slice(1));\n'\
+	'				total[0] += pd[pname];\n'\
+	'				if(pname.indexOf("suspend") >= 0)\n'\
+	'					total[tidx] += pd[pname];\n'\
+	'				else\n'\
+	'					total[tidx+1] += pd[pname];\n'\
+	'			}\n'\
+	'		}\n'\
+	'		var devname = deviceTitle(this.title, total, cpu);\n'\
+	'		var left = 0.0;\n'\
+	'		for (var t = 0; t < pdata.length; t++) {\n'\
+	'			pd = pdata[t];\n'\
+	'			devinfo = document.getElementById("devicedetail"+t);\n'\
+	'			var phases = devinfo.getElementsByClassName("phaselet");\n'\
+	'			for (var i = 0; i < phases.length; i++) {\n'\
+	'				if(phases[i].id in pd) {\n'\
+	'					var w = 100.0*pd[phases[i].id]/total[0];\n'\
+	'					var fs = 32;\n'\
+	'					if(w < 8) fs = 4*w | 0;\n'\
+	'					var fs2 = fs*3/4;\n'\
+	'					phases[i].style.width = w+"%";\n'\
+	'					phases[i].style.left = left+"%";\n'\
+	'					phases[i].title = phases[i].id+" "+pd[phases[i].id]+" ms";\n'\
+	'					left += w;\n'\
+	'					var time = "<t4 style=\\"font-size:"+fs+"px\\">"+pd[phases[i].id]+" ms<br></t4>";\n'\
+	'					var pname = "<t3 style=\\"font-size:"+fs2+"px\\">"+phases[i].id.replace("_", " ")+"</t3>";\n'\
+	'					phases[i].innerHTML = time+pname;\n'\
+	'				} else {\n'\
+	'					phases[i].style.width = "0%";\n'\
+	'					phases[i].style.left = left+"%";\n'\
+	'				}\n'\
+	'			}\n'\
+	'		}\n'\
 	'		var cglist = document.getElementById("callgraphs");\n'\
 	'		if(!cglist) return;\n'\
 	'		var cg = cglist.getElementsByClassName("atop");\n'\
 	'		for (var i = 0; i < cg.length; i++) {\n'\
-	'			if(filter.indexOf(cg[i].id) >= 0) {\n'\
+	'			if(idlist.indexOf(cg[i].id) >= 0) {\n'\
 	'				cg[i].style.display = "block";\n'\
 	'			} else {\n'\
 	'				cg[i].style.display = "none";\n'\
 	'			}\n'\
 	'		}\n'\
 	'	}\n'\
+	'	function devListWindow(e) {\n'\
+	'		var sx = e.clientX;\n'\
+	'		if(sx > window.innerWidth - 440)\n'\
+	'			sx = window.innerWidth - 440;\n'\
+	'		var cfg="top="+e.screenY+", left="+sx+", width=440, height=720, scrollbars=yes";\n'\
+	'		var win = window.open("", "_blank", cfg);\n'\
+	'		if(window.chrome) win.moveBy(sx, 0);\n'\
+	'		var html = "<title>"+e.target.innerHTML+"</title>"+\n'\
+	'			"<style type=\\"text/css\\">"+\n'\
+	'			"   ul {list-style-type:circle;padding-left:10px;margin-left:10px;}"+\n'\
+	'			"</style>"\n'\
+	'		var dt = devtable[0];\n'\
+	'		if(e.target.id != "devlist1")\n'\
+	'			dt = devtable[1];\n'\
+	'		win.document.write(html+dt);\n'\
+	'	}\n'\
 	'	window.addEventListener("load", function () {\n'\
 	'		var dmesg = document.getElementById("dmesg");\n'\
 	'		dmesg.style.width = "100%"\n'\
 	'		document.getElementById("zoomin").onclick = zoomTimeline;\n'\
 	'		document.getElementById("zoomout").onclick = zoomTimeline;\n'\
 	'		document.getElementById("zoomdef").onclick = zoomTimeline;\n'\
+	'		var devlist = document.getElementsByClassName("devlist");\n'\
+	'		for (var i = 0; i < devlist.length; i++)\n'\
+	'			devlist[i].onclick = devListWindow;\n'\
 	'		var dev = dmesg.getElementsByClassName("thread");\n'\
 	'		for (var i = 0; i < dev.length; i++) {\n'\
 	'			dev[i].onclick = deviceDetail;\n'\
+	'			dev[i].onmouseover = deviceHover;\n'\
+	'			dev[i].onmouseout = deviceUnhover;\n'\
 	'		}\n'\
 	'		zoomTimeline();\n'\
 	'	});\n'\
@@ -1191,256 +2680,912 @@
 
 # Function: executeSuspend
 # Description:
-#	 Execute system suspend through the sysfs interface
+#	 Execute system suspend through the sysfs interface, then copy the output
+#	 dmesg and ftrace files to the test output directory.
 def executeSuspend():
-	global sysvals, data
+	global sysvals
 
-	detectUSB()
-	pf = open(sysvals.powerfile, 'w')
-	# clear the kernel ring buffer just as we start
-	os.system("dmesg -C")
-	# start ftrace
-	if(data.useftrace):
-		print("START TRACING")
-		os.system("echo 1 > "+sysvals.tpath+"tracing_on")
-		os.system("echo SUSPEND START > "+sysvals.tpath+"trace_marker")
-	# initiate suspend
-	if(sysvals.rtcwake):
-		print("SUSPEND START")
-		os.system("rtcwake -s 10 -m "+sysvals.suspendmode)
-	else:
-		print("SUSPEND START (press a key to resume)")
+	detectUSB(False)
+	t0 = time.time()*1000
+	tp = sysvals.tpath
+	# execute however many s/r runs requested
+	for count in range(1,sysvals.execcount+1):
+		# clear the kernel ring buffer just as we start
+		os.system('dmesg -C')
+		# enable callgraph ftrace only for the second run
+		if(sysvals.usecallgraph and count == 2):
+			# set trace type
+			os.system('echo function_graph > '+tp+'current_tracer')
+			os.system('echo "" > '+tp+'set_ftrace_filter')
+			# set trace format options
+			os.system('echo funcgraph-abstime > '+tp+'trace_options')
+			os.system('echo funcgraph-proc > '+tp+'trace_options')
+			# focus only on device suspend and resume
+			os.system('cat '+tp+'available_filter_functions | '+\
+				'grep dpm_run_callback > '+tp+'set_graph_function')
+		# if this is test2 and there's a delay, start here
+		if(count > 1 and sysvals.x2delay > 0):
+			tN = time.time()*1000
+			while (tN - t0) < sysvals.x2delay:
+				tN = time.time()*1000
+				time.sleep(0.001)
+		# start ftrace
+		if(sysvals.usecallgraph or sysvals.usetraceevents):
+			print('START TRACING')
+			os.system('echo 1 > '+tp+'tracing_on')
+		# initiate suspend
+		if(sysvals.usecallgraph or sysvals.usetraceevents):
+			os.system('echo SUSPEND START > '+tp+'trace_marker')
+		if(sysvals.rtcwake):
+			print('SUSPEND START')
+			print('will autoresume in %d seconds' % sysvals.rtcwaketime)
+			sysvals.rtcWakeAlarm()
+		else:
+			print('SUSPEND START (press a key to resume)')
+		pf = open(sysvals.powerfile, 'w')
 		pf.write(sysvals.suspendmode)
-	# execution will pause here
-	pf.close()
-	# return from suspend
-	print("RESUME COMPLETE")
-	# stop ftrace
-	if(data.useftrace):
-		os.system("echo RESUME COMPLETE > "+sysvals.tpath+"trace_marker")
-		os.system("echo 0 > "+sysvals.tpath+"tracing_on")
-		print("CAPTURING FTRACE")
-		os.system("echo \""+sysvals.teststamp+"\" > "+sysvals.ftracefile)
-		os.system("cat "+sysvals.tpath+"trace >> "+sysvals.ftracefile)
-	# grab a copy of the dmesg output
-	print("CAPTURING DMESG")
-	os.system("echo \""+sysvals.teststamp+"\" > "+sysvals.dmesgfile)
-	os.system("dmesg -c >> "+sysvals.dmesgfile)
+		# execution will pause here
+		pf.close()
+		t0 = time.time()*1000
+		# return from suspend
+		print('RESUME COMPLETE')
+		if(sysvals.usecallgraph or sysvals.usetraceevents):
+			os.system('echo RESUME COMPLETE > '+tp+'trace_marker')
+		# see if there's firmware timing data to be had
+		t = sysvals.postresumetime
+		if(t > 0):
+			print('Waiting %d seconds for POST-RESUME trace events...' % t)
+			time.sleep(t)
+		# stop ftrace
+		if(sysvals.usecallgraph or sysvals.usetraceevents):
+			os.system('echo 0 > '+tp+'tracing_on')
+			print('CAPTURING TRACE')
+			writeDatafileHeader(sysvals.ftracefile)
+			os.system('cat '+tp+'trace >> '+sysvals.ftracefile)
+			os.system('echo "" > '+tp+'trace')
+		# grab a copy of the dmesg output
+		print('CAPTURING DMESG')
+		writeDatafileHeader(sysvals.dmesgfile)
+		os.system('dmesg -c >> '+sysvals.dmesgfile)
+
+def writeDatafileHeader(filename):
+	global sysvals
+
+	fw = getFPDT(False)
+	prt = sysvals.postresumetime
+	fp = open(filename, 'a')
+	fp.write(sysvals.teststamp+'\n')
+	if(fw):
+		fp.write('# fwsuspend %u fwresume %u\n' % (fw[0], fw[1]))
+	if(prt > 0):
+		fp.write('# post resume time %u\n' % prt)
+	fp.close()
+
+# Function: executeAndroidSuspend
+# Description:
+#	 Execute system suspend through the sysfs interface
+#	 on a remote android device, then transfer the output
+#	 dmesg and ftrace files to the local output directory.
+def executeAndroidSuspend():
+	global sysvals
+
+	# check to see if the display is currently off
+	tp = sysvals.tpath
+	out = os.popen(sysvals.adb+\
+		' shell dumpsys power | grep mScreenOn').read().strip()
+	# if so we need to turn it on so we can issue a new suspend
+	if(out.endswith('false')):
+		print('Waking the device up for the test...')
+		# send the KEYPAD_POWER keyevent to wake it up
+		os.system(sysvals.adb+' shell input keyevent 26')
+		# wait a few seconds so the user can see the device wake up
+		time.sleep(3)
+	# execute however many s/r runs requested
+	for count in range(1,sysvals.execcount+1):
+		# clear the kernel ring buffer just as we start
+		os.system(sysvals.adb+' shell dmesg -c > /dev/null 2>&1')
+		# start ftrace
+		if(sysvals.usetraceevents):
+			print('START TRACING')
+			os.system(sysvals.adb+" shell 'echo 1 > "+tp+"tracing_on'")
+		# initiate suspend
+		for count in range(1,sysvals.execcount+1):
+			if(sysvals.usetraceevents):
+				os.system(sysvals.adb+\
+					" shell 'echo SUSPEND START > "+tp+"trace_marker'")
+			print('SUSPEND START (press a key on the device to resume)')
+			os.system(sysvals.adb+" shell 'echo "+sysvals.suspendmode+\
+				" > "+sysvals.powerfile+"'")
+			# execution will pause here, then adb will exit
+			while(True):
+				check = os.popen(sysvals.adb+\
+					' shell pwd 2>/dev/null').read().strip()
+				if(len(check) > 0):
+					break
+				time.sleep(1)
+			if(sysvals.usetraceevents):
+				os.system(sysvals.adb+" shell 'echo RESUME COMPLETE > "+tp+\
+					"trace_marker'")
+		# return from suspend
+		print('RESUME COMPLETE')
+		# stop ftrace
+		if(sysvals.usetraceevents):
+			os.system(sysvals.adb+" shell 'echo 0 > "+tp+"tracing_on'")
+			print('CAPTURING TRACE')
+			os.system('echo "'+sysvals.teststamp+'" > '+sysvals.ftracefile)
+			os.system(sysvals.adb+' shell cat '+tp+\
+				'trace >> '+sysvals.ftracefile)
+		# grab a copy of the dmesg output
+		print('CAPTURING DMESG')
+		os.system('echo "'+sysvals.teststamp+'" > '+sysvals.dmesgfile)
+		os.system(sysvals.adb+' shell dmesg >> '+sysvals.dmesgfile)
+
+# Function: setUSBDevicesAuto
+# Description:
+#	 Set the autosuspend control parameter of all USB devices to auto
+#	 This can be dangerous, so use at your own risk, most devices are set
+#	 to always-on since the kernel cant determine if the device can
+#	 properly autosuspend
+def setUSBDevicesAuto():
+	global sysvals
+
+	rootCheck()
+	for dirname, dirnames, filenames in os.walk('/sys/devices'):
+		if(re.match('.*/usb[0-9]*.*', dirname) and
+			'idVendor' in filenames and 'idProduct' in filenames):
+			os.system('echo auto > %s/power/control' % dirname)
+			name = dirname.split('/')[-1]
+			desc = os.popen('cat %s/product 2>/dev/null' % \
+				dirname).read().replace('\n', '')
+			ctrl = os.popen('cat %s/power/control 2>/dev/null' % \
+				dirname).read().replace('\n', '')
+			print('control is %s for %6s: %s' % (ctrl, name, desc))
+
+# Function: yesno
+# Description:
+#	 Print out an equivalent Y or N for a set of known parameter values
+# Output:
+#	 'Y', 'N', or ' ' if the value is unknown
+def yesno(val):
+	yesvals = ['auto', 'enabled', 'active', '1']
+	novals = ['on', 'disabled', 'suspended', 'forbidden', 'unsupported']
+	if val in yesvals:
+		return 'Y'
+	elif val in novals:
+		return 'N'
+	return ' '
+
+# Function: ms2nice
+# Description:
+#	 Print out a very concise time string in minutes and seconds
+# Output:
+#	 The time string, e.g. "1901m16s"
+def ms2nice(val):
+	ms = 0
+	try:
+		ms = int(val)
+	except:
+		return 0.0
+	m = ms / 60000
+	s = (ms / 1000) - (m * 60)
+	return '%3dm%2ds' % (m, s)
 
 # Function: detectUSB
 # Description:
-#	 Detect all the USB hosts and devices currently connected
-def detectUSB():
-	global sysvals, data
+#	 Detect all the USB hosts and devices currently connected and add
+#	 a list of USB device names to sysvals for better timeline readability
+# Arguments:
+#	 output: True to output the info to stdout, False otherwise
+def detectUSB(output):
+	global sysvals
 
-	for dirname, dirnames, filenames in os.walk("/sys/devices"):
-		if(re.match(r".*/usb[0-9]*.*", dirname) and
-			"idVendor" in filenames and "idProduct" in filenames):
-			vid = os.popen("cat %s/idVendor 2>/dev/null" % dirname).read().replace('\n', '')
-			pid = os.popen("cat %s/idProduct 2>/dev/null" % dirname).read().replace('\n', '')
-			product = os.popen("cat %s/product 2>/dev/null" % dirname).read().replace('\n', '')
+	field = {'idVendor':'', 'idProduct':'', 'product':'', 'speed':''}
+	power = {'async':'', 'autosuspend':'', 'autosuspend_delay_ms':'',
+			 'control':'', 'persist':'', 'runtime_enabled':'',
+			 'runtime_status':'', 'runtime_usage':'',
+			'runtime_active_time':'',
+			'runtime_suspended_time':'',
+			'active_duration':'',
+			'connected_duration':''}
+	if(output):
+		print('LEGEND')
+		print('---------------------------------------------------------------------------------------------')
+		print('  A = async/sync PM queue Y/N                       D = autosuspend delay (seconds)')
+		print('  S = autosuspend Y/N                         rACTIVE = runtime active (min/sec)')
+		print('  P = persist across suspend Y/N              rSUSPEN = runtime suspend (min/sec)')
+		print('  E = runtime suspend enabled/forbidden Y/N    ACTIVE = active duration (min/sec)')
+		print('  R = runtime status active/suspended Y/N     CONNECT = connected duration (min/sec)')
+		print('  U = runtime usage count')
+		print('---------------------------------------------------------------------------------------------')
+		print('  NAME       ID      DESCRIPTION         SPEED A S P E R U D rACTIVE rSUSPEN  ACTIVE CONNECT')
+		print('---------------------------------------------------------------------------------------------')
+
+	for dirname, dirnames, filenames in os.walk('/sys/devices'):
+		if(re.match('.*/usb[0-9]*.*', dirname) and
+			'idVendor' in filenames and 'idProduct' in filenames):
+			for i in field:
+				field[i] = os.popen('cat %s/%s 2>/dev/null' % \
+					(dirname, i)).read().replace('\n', '')
 			name = dirname.split('/')[-1]
-			if(len(product) > 0):
-				data.altdevname[name] = "%s [%s]" % (product, name)
+			if(len(field['product']) > 0):
+				sysvals.altdevname[name] = \
+					'%s [%s]' % (field['product'], name)
 			else:
-				data.altdevname[name] = "%s:%s [%s]" % (vid, pid, name)
+				sysvals.altdevname[name] = \
+					'%s:%s [%s]' % (field['idVendor'], \
+						field['idProduct'], name)
+			if(output):
+				for i in power:
+					power[i] = os.popen('cat %s/power/%s 2>/dev/null' % \
+						(dirname, i)).read().replace('\n', '')
+				if(re.match('usb[0-9]*', name)):
+					first = '%-8s' % name
+				else:
+					first = '%8s' % name
+				print('%s [%s:%s] %-20s %-4s %1s %1s %1s %1s %1s %1s %1s %s %s %s %s' % \
+					(first, field['idVendor'], field['idProduct'], \
+					field['product'][0:20], field['speed'], \
+					yesno(power['async']), \
+					yesno(power['control']), \
+					yesno(power['persist']), \
+					yesno(power['runtime_enabled']), \
+					yesno(power['runtime_status']), \
+					power['runtime_usage'], \
+					power['autosuspend'], \
+					ms2nice(power['runtime_active_time']), \
+					ms2nice(power['runtime_suspended_time']), \
+					ms2nice(power['active_duration']), \
+					ms2nice(power['connected_duration'])))
 
+# Function: getModes
+# Description:
+#	 Determine the supported power modes on this system
+# Output:
+#	 A string list of the available modes
 def getModes():
 	global sysvals
-	modes = ""
-	if(os.path.exists(sysvals.powerfile)):
-		fp = open(sysvals.powerfile, 'r')
-		modes = string.split(fp.read())
-		fp.close()
+	modes = ''
+	if(not sysvals.android):
+		if(os.path.exists(sysvals.powerfile)):
+			fp = open(sysvals.powerfile, 'r')
+			modes = string.split(fp.read())
+			fp.close()
+	else:
+		line = os.popen(sysvals.adb+' shell cat '+\
+			sysvals.powerfile).read().strip()
+		modes = string.split(line)
 	return modes
 
+# Function: getFPDT
+# Description:
+#	 Read the acpi bios tables and pull out FPDT, the firmware data
+# Arguments:
+#	 output: True to output the info to stdout, False otherwise
+def getFPDT(output):
+	global sysvals
+
+	rectype = {}
+	rectype[0] = 'Firmware Basic Boot Performance Record'
+	rectype[1] = 'S3 Performance Table Record'
+	prectype = {}
+	prectype[0] = 'Basic S3 Resume Performance Record'
+	prectype[1] = 'Basic S3 Suspend Performance Record'
+
+	rootCheck()
+	if(not os.path.exists(sysvals.fpdtpath)):
+		if(output):
+			doError('file doesnt exist: %s' % sysvals.fpdtpath, False)
+		return False
+	if(not os.access(sysvals.fpdtpath, os.R_OK)):
+		if(output):
+			doError('file isnt readable: %s' % sysvals.fpdtpath, False)
+		return False
+	if(not os.path.exists(sysvals.mempath)):
+		if(output):
+			doError('file doesnt exist: %s' % sysvals.mempath, False)
+		return False
+	if(not os.access(sysvals.mempath, os.R_OK)):
+		if(output):
+			doError('file isnt readable: %s' % sysvals.mempath, False)
+		return False
+
+	fp = open(sysvals.fpdtpath, 'rb')
+	buf = fp.read()
+	fp.close()
+
+	if(len(buf) < 36):
+		if(output):
+			doError('Invalid FPDT table data, should '+\
+				'be at least 36 bytes', False)
+		return False
+
+	table = struct.unpack('4sIBB6s8sI4sI', buf[0:36])
+	if(output):
+		print('')
+		print('Firmware Performance Data Table (%s)' % table[0])
+		print('                  Signature : %s' % table[0])
+		print('               Table Length : %u' % table[1])
+		print('                   Revision : %u' % table[2])
+		print('                   Checksum : 0x%x' % table[3])
+		print('                     OEM ID : %s' % table[4])
+		print('               OEM Table ID : %s' % table[5])
+		print('               OEM Revision : %u' % table[6])
+		print('                 Creator ID : %s' % table[7])
+		print('           Creator Revision : 0x%x' % table[8])
+		print('')
+
+	if(table[0] != 'FPDT'):
+		if(output):
+			doError('Invalid FPDT table')
+		return False
+	if(len(buf) <= 36):
+		return False
+	i = 0
+	fwData = [0, 0]
+	records = buf[36:]
+	fp = open(sysvals.mempath, 'rb')
+	while(i < len(records)):
+		header = struct.unpack('HBB', records[i:i+4])
+		if(header[0] not in rectype):
+			continue
+		if(header[1] != 16):
+			continue
+		addr = struct.unpack('Q', records[i+8:i+16])[0]
+		try:
+			fp.seek(addr)
+			first = fp.read(8)
+		except:
+			doError('Bad address 0x%x in %s' % (addr, sysvals.mempath), False)
+		rechead = struct.unpack('4sI', first)
+		recdata = fp.read(rechead[1]-8)
+		if(rechead[0] == 'FBPT'):
+			record = struct.unpack('HBBIQQQQQ', recdata)
+			if(output):
+				print('%s (%s)' % (rectype[header[0]], rechead[0]))
+				print('                  Reset END : %u ns' % record[4])
+				print('  OS Loader LoadImage Start : %u ns' % record[5])
+				print(' OS Loader StartImage Start : %u ns' % record[6])
+				print('     ExitBootServices Entry : %u ns' % record[7])
+				print('      ExitBootServices Exit : %u ns' % record[8])
+		elif(rechead[0] == 'S3PT'):
+			if(output):
+				print('%s (%s)' % (rectype[header[0]], rechead[0]))
+			j = 0
+			while(j < len(recdata)):
+				prechead = struct.unpack('HBB', recdata[j:j+4])
+				if(prechead[0] not in prectype):
+					continue
+				if(prechead[0] == 0):
+					record = struct.unpack('IIQQ', recdata[j:j+prechead[1]])
+					fwData[1] = record[2]
+					if(output):
+						print('    %s' % prectype[prechead[0]])
+						print('               Resume Count : %u' % \
+							record[1])
+						print('                 FullResume : %u ns' % \
+							record[2])
+						print('              AverageResume : %u ns' % \
+							record[3])
+				elif(prechead[0] == 1):
+					record = struct.unpack('QQ', recdata[j+4:j+prechead[1]])
+					fwData[0] = record[1] - record[0]
+					if(output):
+						print('    %s' % prectype[prechead[0]])
+						print('               SuspendStart : %u ns' % \
+							record[0])
+						print('                 SuspendEnd : %u ns' % \
+							record[1])
+						print('                SuspendTime : %u ns' % \
+							fwData[0])
+				j += prechead[1]
+		if(output):
+			print('')
+		i += header[1]
+	fp.close()
+	return fwData
+
 # Function: statusCheck
 # Description:
-#	 Verify that the requested command and options will work
-def statusCheck(dryrun):
-	global sysvals, data
-	res = dict()
+#	 Verify that the requested command and options will work, and
+#	 print the results to the terminal
+# Output:
+#	 True if the test will work, False if not
+def statusCheck():
+	global sysvals
+	status = True
 
-	if(data.notestrun):
-		print("SUCCESS: The command should run!")
-		return
+	if(sysvals.android):
+		print('Checking the android system ...')
+	else:
+		print('Checking this system (%s)...' % platform.node())
+
+	# check if adb is connected to a device
+	if(sysvals.android):
+		res = 'NO'
+		out = os.popen(sysvals.adb+' get-state').read().strip()
+		if(out == 'device'):
+			res = 'YES'
+		print('    is android device connected: %s' % res)
+		if(res != 'YES'):
+			print('    Please connect the device before using this tool')
+			return False
 
 	# check we have root access
-	check = "YES"
-	if(os.environ['USER'] != "root"):
-		if(not dryrun):
-			doError("root access is required", False)
-		check = "NO"
-	res["    have root access:     "] = check
+	res = 'NO (No features of this tool will work!)'
+	if(sysvals.android):
+		out = os.popen(sysvals.adb+' shell id').read().strip()
+		if('root' in out):
+			res = 'YES'
+	else:
+		if(os.environ['USER'] == 'root'):
+			res = 'YES'
+	print('    have root access: %s' % res)
+	if(res != 'YES'):
+		if(sysvals.android):
+			print('    Try running "adb root" to restart the daemon as root')
+		else:
+			print('    Try running this script with sudo')
+		return False
 
 	# check sysfs is mounted
-	check = "YES"
-	if(not os.path.exists(sysvals.powerfile)):
-		if(not dryrun):
-			doError("sysfs must be mounted", False)
-		check = "NO"
-	res["    is sysfs mounted:     "] = check
+	res = 'NO (No features of this tool will work!)'
+	if(sysvals.android):
+		out = os.popen(sysvals.adb+' shell ls '+\
+			sysvals.powerfile).read().strip()
+		if(out == sysvals.powerfile):
+			res = 'YES'
+	else:
+		if(os.path.exists(sysvals.powerfile)):
+			res = 'YES'
+	print('    is sysfs mounted: %s' % res)
+	if(res != 'YES'):
+		return False
 
 	# check target mode is a valid mode
-	check = "YES"
+	res = 'NO'
 	modes = getModes()
-	if(sysvals.suspendmode not in modes):
-		if(not dryrun):
-			doError("%s is not a value power mode" % sysvals.suspendmode, False)
-		check = "NO"
-	res["    is "+sysvals.suspendmode+" a power mode: "] = check
+	if(sysvals.suspendmode in modes):
+		res = 'YES'
+	else:
+		status = False
+	print('    is "%s" a valid power mode: %s' % (sysvals.suspendmode, res))
+	if(res == 'NO'):
+		print('      valid power modes are: %s' % modes)
+		print('      please choose one with -m')
+
+	# check if the tool can unlock the device
+	if(sysvals.android):
+		res = 'YES'
+		out1 = os.popen(sysvals.adb+\
+			' shell dumpsys power | grep mScreenOn').read().strip()
+		out2 = os.popen(sysvals.adb+\
+			' shell input').read().strip()
+		if(not out1.startswith('mScreenOn') or not out2.startswith('usage')):
+			res = 'NO (wake the android device up before running the test)'
+		print('    can I unlock the screen: %s' % res)
 
 	# check if ftrace is available
-	if(data.useftrace):
-		check = "YES"
-		if(not verifyFtrace()):
-			if(not dryrun):
-				doError("ftrace is not configured", False)
-			check = "NO"
-		res["    is ftrace usable:     "] = check
+	res = 'NO'
+	ftgood = verifyFtrace()
+	if(ftgood):
+		res = 'YES'
+	elif(sysvals.usecallgraph):
+		status = False
+	print('    is ftrace supported: %s' % res)
+
+	# what data source are we using
+	res = 'DMESG'
+	if(ftgood):
+		sysvals.usetraceeventsonly = True
+		sysvals.usetraceevents = False
+		for e in sysvals.traceevents:
+			check = False
+			if(sysvals.android):
+				out = os.popen(sysvals.adb+' shell ls -d '+\
+					sysvals.epath+e).read().strip()
+				if(out == sysvals.epath+e):
+					check = True
+			else:
+				if(os.path.exists(sysvals.epath+e)):
+					check = True
+			if(not check):
+				sysvals.usetraceeventsonly = False
+			if(e == 'suspend_resume' and check):
+				sysvals.usetraceevents = True
+		if(sysvals.usetraceevents and sysvals.usetraceeventsonly):
+			res = 'FTRACE (all trace events found)'
+		elif(sysvals.usetraceevents):
+			res = 'DMESG and FTRACE (suspend_resume trace event found)'
+	print('    timeline data source: %s' % res)
 
 	# check if rtcwake
-	if(sysvals.rtcwake):
-		check = "YES"
-		version = os.popen("rtcwake -V 2>/dev/null").read()
-		if(not version.startswith("rtcwake")):
-			if(not dryrun):
-				doError("rtcwake is not installed", False)
-			check = "NO"
-		res["    is rtcwake usable:    "] = check
+	res = 'NO'
+	if(sysvals.rtcpath != ''):
+		res = 'YES'
+	elif(sysvals.rtcwake):
+		status = False
+	print('    is rtcwake supported: %s' % res)
 
-	if(dryrun):
-		status = True
-		print("Checking if system can run the current command:")
-		for r in res:
-			print("%s\t%s" % (r, res[r]))
-			if(res[r] != "YES"):
-				status = False
-		if(status):
-			print("SUCCESS: The command should run!")
+	return status
+
+# Function: doError
+# Description:
+#	 generic error function for catastrphic failures
+# Arguments:
+#	 msg: the error message to print
+#	 help: True if printHelp should be called after, False otherwise
+def doError(msg, help):
+	if(help == True):
+		printHelp()
+	print('ERROR: %s\n') % msg
+	sys.exit()
+
+# Function: doWarning
+# Description:
+#	 generic warning function for non-catastrophic anomalies
+# Arguments:
+#	 msg: the warning message to print
+#	 file: If not empty, a filename to request be sent to the owner for debug
+def doWarning(msg, file):
+	print('/* %s */') % msg
+	if(file):
+		print('/* For a fix, please send this'+\
+			' %s file to <todd.e.brandt@intel.com> */' % file)
+
+# Function: rootCheck
+# Description:
+#	 quick check to see if we have root access
+def rootCheck():
+	if(os.environ['USER'] != 'root'):
+		doError('This script must be run as root', False)
+
+# Function: getArgInt
+# Description:
+#	 pull out an integer argument from the command line with checks
+def getArgInt(name, args, min, max):
+	try:
+		arg = args.next()
+	except:
+		doError(name+': no argument supplied', True)
+	try:
+		val = int(arg)
+	except:
+		doError(name+': non-integer value given', True)
+	if(val < min or val > max):
+		doError(name+': value should be between %d and %d' % (min, max), True)
+	return val
+
+# Function: rerunTest
+# Description:
+#	 generate an output from an existing set of ftrace/dmesg logs
+def rerunTest():
+	global sysvals
+
+	if(sysvals.ftracefile != ''):
+		doesTraceLogHaveTraceEvents()
+	if(sysvals.dmesgfile == '' and not sysvals.usetraceeventsonly):
+		doError('recreating this html output '+\
+			'requires a dmesg file', False)
+	sysvals.setOutputFile()
+	vprint('Output file: %s' % sysvals.htmlfile)
+	print('PROCESSING DATA')
+	if(sysvals.usetraceeventsonly):
+		testruns = parseTraceLog()
+	else:
+		testruns = loadKernelLog()
+		for data in testruns:
+			parseKernelLog(data)
+		if(sysvals.ftracefile != ''):
+			appendIncompleteTraceLog(testruns)
+	createHTML(testruns)
+
+# Function: runTest
+# Description:
+#	 execute a suspend/resume, gather the logs, and generate the output
+def runTest(subdir):
+	global sysvals
+
+	# prepare for the test
+	if(not sysvals.android):
+		initFtrace()
+	else:
+		initFtraceAndroid()
+	sysvals.initTestOutput(subdir)
+
+	vprint('Output files:\n    %s' % sysvals.dmesgfile)
+	if(sysvals.usecallgraph or
+		sysvals.usetraceevents or
+		sysvals.usetraceeventsonly):
+		vprint('    %s' % sysvals.ftracefile)
+	vprint('    %s' % sysvals.htmlfile)
+
+	# execute the test
+	if(not sysvals.android):
+		executeSuspend()
+	else:
+		executeAndroidSuspend()
+
+	# analyze the data and create the html output
+	print('PROCESSING DATA')
+	if(sysvals.usetraceeventsonly):
+		# data for kernels 3.15 or newer is entirely in ftrace
+		testruns = parseTraceLog()
+	else:
+		# data for kernels older than 3.15 is primarily in dmesg
+		testruns = loadKernelLog()
+		for data in testruns:
+			parseKernelLog(data)
+		if(sysvals.usecallgraph or sysvals.usetraceevents):
+			appendIncompleteTraceLog(testruns)
+	createHTML(testruns)
+
+# Function: runSummary
+# Description:
+#	 create a summary of tests in a sub-directory
+def runSummary(subdir, output):
+	global sysvals
+
+	# get a list of ftrace output files
+	files = []
+	for dirname, dirnames, filenames in os.walk(subdir):
+		for filename in filenames:
+			if(re.match('.*_ftrace.txt', filename)):
+				files.append("%s/%s" % (dirname, filename))
+
+	# process the files in order and get an array of data objects
+	testruns = []
+	for file in sorted(files):
+		if output:
+			print("Test found in %s" % os.path.dirname(file))
+		sysvals.ftracefile = file
+		sysvals.dmesgfile = file.replace('_ftrace.txt', '_dmesg.txt')
+		doesTraceLogHaveTraceEvents()
+		sysvals.usecallgraph = False
+		if not sysvals.usetraceeventsonly:
+			if(not os.path.exists(sysvals.dmesgfile)):
+				print("Skipping %s: not a valid test input" % file)
+				continue
+			else:
+				if output:
+					f = os.path.basename(sysvals.ftracefile)
+					d = os.path.basename(sysvals.dmesgfile)
+					print("\tInput files: %s and %s" % (f, d))
+				testdata = loadKernelLog()
+				data = testdata[0]
+				parseKernelLog(data)
+				testdata = [data]
+				appendIncompleteTraceLog(testdata)
 		else:
-			print("FAILURE: The command won't run!")
+			if output:
+				print("\tInput file: %s" % os.path.basename(sysvals.ftracefile))
+			testdata = parseTraceLog()
+			data = testdata[0]
+		data.normalizeTime(data.tSuspended)
+		link = file.replace(subdir+'/', '').replace('_ftrace.txt', '.html')
+		data.outfile = link
+		testruns.append(data)
 
+	createHTMLSummarySimple(testruns, subdir+'/summary.html')
+
+# Function: printHelp
+# Description:
+#	 print out the help text
 def printHelp():
 	global sysvals
 	modes = getModes()
 
-	print("")
-	print("AnalyzeSuspend")
-	print("Usage: sudo analyze_suspend.py <options>")
-	print("")
-	print("Description:")
-	print("  Initiates a system suspend/resume while capturing dmesg")
-	print("  and (optionally) ftrace data to analyze device timing")
-	print("")
-	print("  Generates output files in subdirectory: suspend-mmddyy-HHMMSS")
-	print("   HTML output:                    <hostname>_<mode>.html")
-	print("   raw dmesg output:               <hostname>_<mode>_dmesg.txt")
-	print("   raw ftrace output (with -f):    <hostname>_<mode>_ftrace.txt")
-	print("")
-	print("Options:")
-	print("  [general]")
-	print("    -h        Print this help text")
-	print("    -verbose  Print extra information during execution and analysis")
-	print("    -status   Test to see if the system is enabled to run this tool")
-	print("    -modes    List available suspend modes")
-	print("    -m mode   Mode to initiate for suspend %s (default: %s)") % (modes, sysvals.suspendmode)
-	print("    -rtcwake  Use rtcwake to autoresume after 10 seconds (default: disabled)")
-	print("    -f        Use ftrace to create device callgraphs (default: disabled)")
-	print("  [re-analyze data from previous runs]")
-	print("    -dmesg dmesgfile      Create HTML timeline from dmesg file")
-	print("    -ftrace ftracefile    Create HTML callgraph from ftrace file")
-	print("")
+	print('')
+	print('AnalyzeSuspend v%.1f' % sysvals.version)
+	print('Usage: sudo analyze_suspend.py <options>')
+	print('')
+	print('Description:')
+	print('  This tool is designed to assist kernel and OS developers in optimizing')
+	print('  their linux stack\'s suspend/resume time. Using a kernel image built')
+	print('  with a few extra options enabled, the tool will execute a suspend and')
+	print('  capture dmesg and ftrace data until resume is complete. This data is')
+	print('  transformed into a device timeline and an optional callgraph to give')
+	print('  a detailed view of which devices/subsystems are taking the most')
+	print('  time in suspend/resume.')
+	print('')
+	print('  Generates output files in subdirectory: suspend-mmddyy-HHMMSS')
+	print('   HTML output:                    <hostname>_<mode>.html')
+	print('   raw dmesg output:               <hostname>_<mode>_dmesg.txt')
+	print('   raw ftrace output:              <hostname>_<mode>_ftrace.txt')
+	print('')
+	print('Options:')
+	print('  [general]')
+	print('    -h          Print this help text')
+	print('    -v          Print the current tool version')
+	print('    -verbose    Print extra information during execution and analysis')
+	print('    -status     Test to see if the system is enabled to run this tool')
+	print('    -modes      List available suspend modes')
+	print('    -m mode     Mode to initiate for suspend %s (default: %s)') % (modes, sysvals.suspendmode)
+	print('    -rtcwake t  Use rtcwake to autoresume after <t> seconds (default: disabled)')
+	print('  [advanced]')
+	print('    -f          Use ftrace to create device callgraphs (default: disabled)')
+	print('    -filter "d1 d2 ..." Filter out all but this list of dev names')
+	print('    -x2         Run two suspend/resumes back to back (default: disabled)')
+	print('    -x2delay t  Minimum millisecond delay <t> between the two test runs (default: 0 ms)')
+	print('    -postres t  Time after resume completion to wait for post-resume events (default: 0 S)')
+	print('    -multi n d  Execute <n> consecutive tests at <d> seconds intervals. The outputs will')
+	print('                be created in a new subdirectory with a summary page.')
+	print('  [utilities]')
+	print('    -fpdt       Print out the contents of the ACPI Firmware Performance Data Table')
+	print('    -usbtopo    Print out the current USB topology with power info')
+	print('    -usbauto    Enable autosuspend for all connected USB devices')
+	print('  [android testing]')
+	print('    -adb binary Use the given adb binary to run the test on an android device.')
+	print('                The device should already be connected and with root access.')
+	print('                Commands will be executed on the device using "adb shell"')
+	print('  [re-analyze data from previous runs]')
+	print('    -ftrace ftracefile  Create HTML output using ftrace input')
+	print('    -dmesg dmesgfile    Create HTML output using dmesg (not needed for kernel >= 3.15)')
+	print('    -summary directory  Create a summary of all test in this dir')
+	print('')
 	return True
 
-def doError(msg, help):
-	print("ERROR: %s") % msg
-	if(help == True):
-		printHelp()
-	sys.exit()
+# ----------------- MAIN --------------------
+# exec start (skipped if script is loaded as library)
+if __name__ == '__main__':
+	cmd = ''
+	cmdarg = ''
+	multitest = {'run': False, 'count': 0, 'delay': 0}
+	# loop through the command line arguments
+	args = iter(sys.argv[1:])
+	for arg in args:
+		if(arg == '-m'):
+			try:
+				val = args.next()
+			except:
+				doError('No mode supplied', True)
+			sysvals.suspendmode = val
+		elif(arg == '-adb'):
+			try:
+				val = args.next()
+			except:
+				doError('No adb binary supplied', True)
+			if(not os.path.exists(val)):
+				doError('file doesnt exist: %s' % val, False)
+			if(not os.access(val, os.X_OK)):
+				doError('file isnt executable: %s' % val, False)
+			try:
+				check = os.popen(val+' version').read().strip()
+			except:
+				doError('adb version failed to execute', False)
+			if(not re.match('Android Debug Bridge .*', check)):
+				doError('adb version failed to execute', False)
+			sysvals.adb = val
+			sysvals.android = True
+		elif(arg == '-x2'):
+			if(sysvals.postresumetime > 0):
+				doError('-x2 is not compatible with -postres', False)
+			sysvals.execcount = 2
+		elif(arg == '-x2delay'):
+			sysvals.x2delay = getArgInt('-x2delay', args, 0, 60000)
+		elif(arg == '-postres'):
+			if(sysvals.execcount != 1):
+				doError('-x2 is not compatible with -postres', False)
+			sysvals.postresumetime = getArgInt('-postres', args, 0, 3600)
+		elif(arg == '-f'):
+			sysvals.usecallgraph = True
+		elif(arg == '-modes'):
+			cmd = 'modes'
+		elif(arg == '-fpdt'):
+			cmd = 'fpdt'
+		elif(arg == '-usbtopo'):
+			cmd = 'usbtopo'
+		elif(arg == '-usbauto'):
+			cmd = 'usbauto'
+		elif(arg == '-status'):
+			cmd = 'status'
+		elif(arg == '-verbose'):
+			sysvals.verbose = True
+		elif(arg == '-v'):
+			print("Version %.1f" % sysvals.version)
+			sys.exit()
+		elif(arg == '-rtcwake'):
+			sysvals.rtcwake = True
+			sysvals.rtcwaketime = getArgInt('-rtcwake', args, 0, 3600)
+		elif(arg == '-multi'):
+			multitest['run'] = True
+			multitest['count'] = getArgInt('-multi n (exec count)', args, 2, 1000000)
+			multitest['delay'] = getArgInt('-multi d (delay between tests)', args, 0, 3600)
+		elif(arg == '-dmesg'):
+			try:
+				val = args.next()
+			except:
+				doError('No dmesg file supplied', True)
+			sysvals.notestrun = True
+			sysvals.dmesgfile = val
+			if(os.path.exists(sysvals.dmesgfile) == False):
+				doError('%s doesnt exist' % sysvals.dmesgfile, False)
+		elif(arg == '-ftrace'):
+			try:
+				val = args.next()
+			except:
+				doError('No ftrace file supplied', True)
+			sysvals.notestrun = True
+			sysvals.usecallgraph = True
+			sysvals.ftracefile = val
+			if(os.path.exists(sysvals.ftracefile) == False):
+				doError('%s doesnt exist' % sysvals.ftracefile, False)
+		elif(arg == '-summary'):
+			try:
+				val = args.next()
+			except:
+				doError('No directory supplied', True)
+			cmd = 'summary'
+			cmdarg = val
+			sysvals.notestrun = True
+			if(os.path.isdir(val) == False):
+				doError('%s isnt accesible' % val, False)
+		elif(arg == '-filter'):
+			try:
+				val = args.next()
+			except:
+				doError('No devnames supplied', True)
+			sysvals.setDeviceFilter(val)
+		elif(arg == '-h'):
+			printHelp()
+			sys.exit()
+		else:
+			doError('Invalid argument: '+arg, True)
 
-# -- script main --
-# loop through the command line arguments
-cmd = ""
-args = iter(sys.argv[1:])
-for arg in args:
-	if(arg == "-m"):
-		try:
-			val = args.next()
-		except:
-			doError("No mode supplied", True)
-		sysvals.suspendmode = val
-	elif(arg == "-f"):
-		data.useftrace = True
-	elif(arg == "-modes"):
-		cmd = "modes"
-	elif(arg == "-status"):
-		cmd = "status"
-	elif(arg == "-verbose"):
-		data.verbose = True
-	elif(arg == "-rtcwake"):
-		sysvals.rtcwake = True
-	elif(arg == "-dmesg"):
-		try:
-			val = args.next()
-		except:
-			doError("No dmesg file supplied", True)
-		data.notestrun = True
-		data.usedmesg = True
-		sysvals.dmesgfile = val
-	elif(arg == "-ftrace"):
-		try:
-			val = args.next()
-		except:
-			doError("No ftrace file supplied", True)
-		data.notestrun = True
-		data.useftrace = True
-		sysvals.ftracefile = val
-	elif(arg == "-h"):
-		printHelp()
+	# just run a utility command and exit
+	if(cmd != ''):
+		if(cmd == 'status'):
+			statusCheck()
+		elif(cmd == 'fpdt'):
+			if(sysvals.android):
+				doError('cannot read FPDT on android device', False)
+			getFPDT(True)
+		elif(cmd == 'usbtopo'):
+			if(sysvals.android):
+				doError('cannot read USB topology '+\
+					'on an android device', False)
+			detectUSB(True)
+		elif(cmd == 'modes'):
+			modes = getModes()
+			print modes
+		elif(cmd == 'usbauto'):
+			setUSBDevicesAuto()
+		elif(cmd == 'summary'):
+			print("Generating a summary of folder \"%s\"" % cmdarg)
+			runSummary(cmdarg, True)
 		sys.exit()
+
+	# run test on android device
+	if(sysvals.android):
+		if(sysvals.usecallgraph):
+			doError('ftrace (-f) is not yet supported '+\
+				'in the android kernel', False)
+		if(sysvals.notestrun):
+			doError('cannot analyze test files on the '+\
+				'android device', False)
+
+	# if instructed, re-analyze existing data files
+	if(sysvals.notestrun):
+		rerunTest()
+		sys.exit()
+
+	# verify that we can run a test
+	if(not statusCheck()):
+		print('Check FAILED, aborting the test run!')
+		sys.exit()
+
+	if multitest['run']:
+		# run multiple tests in a separte subdirectory
+		s = 'x%d' % multitest['count']
+		subdir = datetime.now().strftime('suspend-'+s+'-%m%d%y-%H%M%S')
+		os.mkdir(subdir)
+		for i in range(multitest['count']):
+			if(i != 0):
+				print('Waiting %d seconds...' % (multitest['delay']))
+				time.sleep(multitest['delay'])
+			print('TEST (%d/%d) START' % (i+1, multitest['count']))
+			runTest(subdir)
+			print('TEST (%d/%d) COMPLETE' % (i+1, multitest['count']))
+		runSummary(subdir, False)
 	else:
-		doError("Invalid argument: "+arg, True)
-
-# just run a utility command and exit
-if(cmd != ""):
-	if(cmd == "status"):
-		statusCheck(True)
-	elif(cmd == "modes"):
-		modes = getModes()
-		print modes
-	sys.exit()
-
-data.initialize()
-
-# if instructed, re-analyze existing data files
-if(data.notestrun):
-	sysvals.setOutputFile()
-	data.vprint("Output file: %s" % sysvals.htmlfile)
-	if(sysvals.dmesgfile != ""):
-		analyzeKernelLog()
-	if(sysvals.ftracefile != ""):
-		analyzeTraceLog()
-	createHTML()
-	sys.exit()
-
-# verify that we can run a test
-data.usedmesg = True
-statusCheck(False)
-
-# prepare for the test
-if(data.useftrace):
-	initFtrace()
-sysvals.initTestOutput()
-
-data.vprint("Output files:\n    %s" % sysvals.dmesgfile)
-if(data.useftrace):
-	data.vprint("    %s" % sysvals.ftracefile)
-data.vprint("    %s" % sysvals.htmlfile)
-
-# execute the test
-executeSuspend()
-analyzeKernelLog()
-if(data.useftrace):
-	analyzeTraceLog()
-createHTML()
+		# run the test in the current directory
+		runTest(".")