| // SPDX-License-Identifier: GPL-2.0-only | 
 | /* | 
 |  * Copyright (c) 2007 Ben Dooks | 
 |  * Copyright (c) 2008 Simtec Electronics | 
 |  *     Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org> | 
 |  * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com> | 
 |  * Copyright (c) 2017 Samsung Electronics Co., Ltd. | 
 |  * | 
 |  * PWM driver for Samsung SoCs | 
 |  */ | 
 |  | 
 | #include <linux/bitops.h> | 
 | #include <linux/clk.h> | 
 | #include <linux/export.h> | 
 | #include <linux/err.h> | 
 | #include <linux/io.h> | 
 | #include <linux/kernel.h> | 
 | #include <linux/module.h> | 
 | #include <linux/of.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/pwm.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/spinlock.h> | 
 | #include <linux/time.h> | 
 |  | 
 | /* For struct samsung_timer_variant and samsung_pwm_lock. */ | 
 | #include <clocksource/samsung_pwm.h> | 
 |  | 
 | #define REG_TCFG0			0x00 | 
 | #define REG_TCFG1			0x04 | 
 | #define REG_TCON			0x08 | 
 |  | 
 | #define REG_TCNTB(chan)			(0x0c + ((chan) * 0xc)) | 
 | #define REG_TCMPB(chan)			(0x10 + ((chan) * 0xc)) | 
 |  | 
 | #define TCFG0_PRESCALER_MASK		0xff | 
 | #define TCFG0_PRESCALER1_SHIFT		8 | 
 |  | 
 | #define TCFG1_MUX_MASK			0xf | 
 | #define TCFG1_SHIFT(chan)		(4 * (chan)) | 
 |  | 
 | /* | 
 |  * Each channel occupies 4 bits in TCON register, but there is a gap of 4 | 
 |  * bits (one channel) after channel 0, so channels have different numbering | 
 |  * when accessing TCON register. See to_tcon_channel() function. | 
 |  * | 
 |  * In addition, the location of autoreload bit for channel 4 (TCON channel 5) | 
 |  * in its set of bits is 2 as opposed to 3 for other channels. | 
 |  */ | 
 | #define TCON_START(chan)		BIT(4 * (chan) + 0) | 
 | #define TCON_MANUALUPDATE(chan)		BIT(4 * (chan) + 1) | 
 | #define TCON_INVERT(chan)		BIT(4 * (chan) + 2) | 
 | #define _TCON_AUTORELOAD(chan)		BIT(4 * (chan) + 3) | 
 | #define _TCON_AUTORELOAD4(chan)		BIT(4 * (chan) + 2) | 
 | #define TCON_AUTORELOAD(chan)		\ | 
 | 	((chan < 5) ? _TCON_AUTORELOAD(chan) : _TCON_AUTORELOAD4(chan)) | 
 |  | 
 | /** | 
 |  * struct samsung_pwm_channel - private data of PWM channel | 
 |  * @period_ns:	current period in nanoseconds programmed to the hardware | 
 |  * @duty_ns:	current duty time in nanoseconds programmed to the hardware | 
 |  * @tin_ns:	time of one timer tick in nanoseconds with current timer rate | 
 |  */ | 
 | struct samsung_pwm_channel { | 
 | 	u32 period_ns; | 
 | 	u32 duty_ns; | 
 | 	u32 tin_ns; | 
 | }; | 
 |  | 
 | /** | 
 |  * struct samsung_pwm_chip - private data of PWM chip | 
 |  * @variant:		local copy of hardware variant data | 
 |  * @inverter_mask:	inverter status for all channels - one bit per channel | 
 |  * @disabled_mask:	disabled status for all channels - one bit per channel | 
 |  * @base:		base address of mapped PWM registers | 
 |  * @base_clk:		base clock used to drive the timers | 
 |  * @tclk0:		external clock 0 (can be ERR_PTR if not present) | 
 |  * @tclk1:		external clock 1 (can be ERR_PTR if not present) | 
 |  * @channel:		per channel driver data | 
 |  */ | 
 | struct samsung_pwm_chip { | 
 | 	struct samsung_pwm_variant variant; | 
 | 	u8 inverter_mask; | 
 | 	u8 disabled_mask; | 
 |  | 
 | 	void __iomem *base; | 
 | 	struct clk *base_clk; | 
 | 	struct clk *tclk0; | 
 | 	struct clk *tclk1; | 
 | 	struct samsung_pwm_channel channel[SAMSUNG_PWM_NUM]; | 
 | }; | 
 |  | 
 | #ifndef CONFIG_CLKSRC_SAMSUNG_PWM | 
 | /* | 
 |  * PWM block is shared between pwm-samsung and samsung_pwm_timer drivers | 
 |  * and some registers need access synchronization. If both drivers are | 
 |  * compiled in, the spinlock is defined in the clocksource driver, | 
 |  * otherwise following definition is used. | 
 |  * | 
 |  * Currently we do not need any more complex synchronization method | 
 |  * because all the supported SoCs contain only one instance of the PWM | 
 |  * IP. Should this change, both drivers will need to be modified to | 
 |  * properly synchronize accesses to particular instances. | 
 |  */ | 
 | static DEFINE_SPINLOCK(samsung_pwm_lock); | 
 | #endif | 
 |  | 
 | static inline | 
 | struct samsung_pwm_chip *to_samsung_pwm_chip(struct pwm_chip *chip) | 
 | { | 
 | 	return pwmchip_get_drvdata(chip); | 
 | } | 
 |  | 
 | static inline unsigned int to_tcon_channel(unsigned int channel) | 
 | { | 
 | 	/* TCON register has a gap of 4 bits (1 channel) after channel 0 */ | 
 | 	return (channel == 0) ? 0 : (channel + 1); | 
 | } | 
 |  | 
 | static void __pwm_samsung_manual_update(struct samsung_pwm_chip *our_chip, | 
 | 				      struct pwm_device *pwm) | 
 | { | 
 | 	unsigned int tcon_chan = to_tcon_channel(pwm->hwpwm); | 
 | 	u32 tcon; | 
 |  | 
 | 	tcon = readl(our_chip->base + REG_TCON); | 
 | 	tcon |= TCON_MANUALUPDATE(tcon_chan); | 
 | 	writel(tcon, our_chip->base + REG_TCON); | 
 |  | 
 | 	tcon &= ~TCON_MANUALUPDATE(tcon_chan); | 
 | 	writel(tcon, our_chip->base + REG_TCON); | 
 | } | 
 |  | 
 | static void pwm_samsung_set_divisor(struct samsung_pwm_chip *our_chip, | 
 | 				    unsigned int channel, u8 divisor) | 
 | { | 
 | 	u8 shift = TCFG1_SHIFT(channel); | 
 | 	unsigned long flags; | 
 | 	u32 reg; | 
 | 	u8 bits; | 
 |  | 
 | 	bits = (fls(divisor) - 1) - our_chip->variant.div_base; | 
 |  | 
 | 	spin_lock_irqsave(&samsung_pwm_lock, flags); | 
 |  | 
 | 	reg = readl(our_chip->base + REG_TCFG1); | 
 | 	reg &= ~(TCFG1_MUX_MASK << shift); | 
 | 	reg |= bits << shift; | 
 | 	writel(reg, our_chip->base + REG_TCFG1); | 
 |  | 
 | 	spin_unlock_irqrestore(&samsung_pwm_lock, flags); | 
 | } | 
 |  | 
 | static int pwm_samsung_is_tdiv(struct samsung_pwm_chip *our_chip, unsigned int chan) | 
 | { | 
 | 	struct samsung_pwm_variant *variant = &our_chip->variant; | 
 | 	u32 reg; | 
 |  | 
 | 	reg = readl(our_chip->base + REG_TCFG1); | 
 | 	reg >>= TCFG1_SHIFT(chan); | 
 | 	reg &= TCFG1_MUX_MASK; | 
 |  | 
 | 	return (BIT(reg) & variant->tclk_mask) == 0; | 
 | } | 
 |  | 
 | static unsigned long pwm_samsung_get_tin_rate(struct samsung_pwm_chip *our_chip, | 
 | 					      unsigned int chan) | 
 | { | 
 | 	unsigned long rate; | 
 | 	u32 reg; | 
 |  | 
 | 	rate = clk_get_rate(our_chip->base_clk); | 
 |  | 
 | 	reg = readl(our_chip->base + REG_TCFG0); | 
 | 	if (chan >= 2) | 
 | 		reg >>= TCFG0_PRESCALER1_SHIFT; | 
 | 	reg &= TCFG0_PRESCALER_MASK; | 
 |  | 
 | 	return rate / (reg + 1); | 
 | } | 
 |  | 
 | static unsigned long pwm_samsung_calc_tin(struct pwm_chip *chip, | 
 | 					  unsigned int chan, unsigned long freq) | 
 | { | 
 | 	struct samsung_pwm_chip *our_chip = to_samsung_pwm_chip(chip); | 
 | 	struct samsung_pwm_variant *variant = &our_chip->variant; | 
 | 	unsigned long rate; | 
 | 	struct clk *clk; | 
 | 	u8 div; | 
 |  | 
 | 	if (!pwm_samsung_is_tdiv(our_chip, chan)) { | 
 | 		clk = (chan < 2) ? our_chip->tclk0 : our_chip->tclk1; | 
 | 		if (!IS_ERR(clk)) { | 
 | 			rate = clk_get_rate(clk); | 
 | 			if (rate) | 
 | 				return rate; | 
 | 		} | 
 |  | 
 | 		dev_warn(pwmchip_parent(chip), | 
 | 			"tclk of PWM %d is inoperational, using tdiv\n", chan); | 
 | 	} | 
 |  | 
 | 	rate = pwm_samsung_get_tin_rate(our_chip, chan); | 
 | 	dev_dbg(pwmchip_parent(chip), "tin parent at %lu\n", rate); | 
 |  | 
 | 	/* | 
 | 	 * Compare minimum PWM frequency that can be achieved with possible | 
 | 	 * divider settings and choose the lowest divisor that can generate | 
 | 	 * frequencies lower than requested. | 
 | 	 */ | 
 | 	if (variant->bits < 32) { | 
 | 		/* Only for s3c24xx */ | 
 | 		for (div = variant->div_base; div < 4; ++div) | 
 | 			if ((rate >> (variant->bits + div)) < freq) | 
 | 				break; | 
 | 	} else { | 
 | 		/* | 
 | 		 * Other variants have enough counter bits to generate any | 
 | 		 * requested rate, so no need to check higher divisors. | 
 | 		 */ | 
 | 		div = variant->div_base; | 
 | 	} | 
 |  | 
 | 	pwm_samsung_set_divisor(our_chip, chan, BIT(div)); | 
 |  | 
 | 	return rate >> div; | 
 | } | 
 |  | 
 | static int pwm_samsung_request(struct pwm_chip *chip, struct pwm_device *pwm) | 
 | { | 
 | 	struct samsung_pwm_chip *our_chip = to_samsung_pwm_chip(chip); | 
 |  | 
 | 	if (!(our_chip->variant.output_mask & BIT(pwm->hwpwm))) { | 
 | 		dev_warn(pwmchip_parent(chip), | 
 | 			"tried to request PWM channel %d without output\n", | 
 | 			pwm->hwpwm); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	memset(&our_chip->channel[pwm->hwpwm], 0, sizeof(our_chip->channel[pwm->hwpwm])); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int pwm_samsung_enable(struct pwm_chip *chip, struct pwm_device *pwm) | 
 | { | 
 | 	struct samsung_pwm_chip *our_chip = to_samsung_pwm_chip(chip); | 
 | 	unsigned int tcon_chan = to_tcon_channel(pwm->hwpwm); | 
 | 	unsigned long flags; | 
 | 	u32 tcon; | 
 |  | 
 | 	spin_lock_irqsave(&samsung_pwm_lock, flags); | 
 |  | 
 | 	tcon = readl(our_chip->base + REG_TCON); | 
 |  | 
 | 	tcon &= ~TCON_START(tcon_chan); | 
 | 	tcon |= TCON_MANUALUPDATE(tcon_chan); | 
 | 	writel(tcon, our_chip->base + REG_TCON); | 
 |  | 
 | 	tcon &= ~TCON_MANUALUPDATE(tcon_chan); | 
 | 	tcon |= TCON_START(tcon_chan) | TCON_AUTORELOAD(tcon_chan); | 
 | 	writel(tcon, our_chip->base + REG_TCON); | 
 |  | 
 | 	our_chip->disabled_mask &= ~BIT(pwm->hwpwm); | 
 |  | 
 | 	spin_unlock_irqrestore(&samsung_pwm_lock, flags); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void pwm_samsung_disable(struct pwm_chip *chip, struct pwm_device *pwm) | 
 | { | 
 | 	struct samsung_pwm_chip *our_chip = to_samsung_pwm_chip(chip); | 
 | 	unsigned int tcon_chan = to_tcon_channel(pwm->hwpwm); | 
 | 	unsigned long flags; | 
 | 	u32 tcon; | 
 |  | 
 | 	spin_lock_irqsave(&samsung_pwm_lock, flags); | 
 |  | 
 | 	tcon = readl(our_chip->base + REG_TCON); | 
 | 	tcon &= ~TCON_AUTORELOAD(tcon_chan); | 
 | 	writel(tcon, our_chip->base + REG_TCON); | 
 |  | 
 | 	/* | 
 | 	 * In case the PWM is at 100% duty cycle, force a manual | 
 | 	 * update to prevent the signal from staying high. | 
 | 	 */ | 
 | 	if (readl(our_chip->base + REG_TCMPB(pwm->hwpwm)) == (u32)-1U) | 
 | 		__pwm_samsung_manual_update(our_chip, pwm); | 
 |  | 
 | 	our_chip->disabled_mask |= BIT(pwm->hwpwm); | 
 |  | 
 | 	spin_unlock_irqrestore(&samsung_pwm_lock, flags); | 
 | } | 
 |  | 
 | static void pwm_samsung_manual_update(struct samsung_pwm_chip *our_chip, | 
 | 				      struct pwm_device *pwm) | 
 | { | 
 | 	unsigned long flags; | 
 |  | 
 | 	spin_lock_irqsave(&samsung_pwm_lock, flags); | 
 |  | 
 | 	__pwm_samsung_manual_update(our_chip, pwm); | 
 |  | 
 | 	spin_unlock_irqrestore(&samsung_pwm_lock, flags); | 
 | } | 
 |  | 
 | static int __pwm_samsung_config(struct pwm_chip *chip, struct pwm_device *pwm, | 
 | 				int duty_ns, int period_ns, bool force_period) | 
 | { | 
 | 	struct samsung_pwm_chip *our_chip = to_samsung_pwm_chip(chip); | 
 | 	struct samsung_pwm_channel *chan = &our_chip->channel[pwm->hwpwm]; | 
 | 	u32 tin_ns = chan->tin_ns, tcnt, tcmp, oldtcmp; | 
 |  | 
 | 	tcnt = readl(our_chip->base + REG_TCNTB(pwm->hwpwm)); | 
 | 	oldtcmp = readl(our_chip->base + REG_TCMPB(pwm->hwpwm)); | 
 |  | 
 | 	/* We need tick count for calculation, not last tick. */ | 
 | 	++tcnt; | 
 |  | 
 | 	/* Check to see if we are changing the clock rate of the PWM. */ | 
 | 	if (chan->period_ns != period_ns || force_period) { | 
 | 		unsigned long tin_rate; | 
 | 		u32 period; | 
 |  | 
 | 		period = NSEC_PER_SEC / period_ns; | 
 |  | 
 | 		dev_dbg(pwmchip_parent(chip), "duty_ns=%d, period_ns=%d (%u)\n", | 
 | 						duty_ns, period_ns, period); | 
 |  | 
 | 		tin_rate = pwm_samsung_calc_tin(chip, pwm->hwpwm, period); | 
 |  | 
 | 		dev_dbg(pwmchip_parent(chip), "tin_rate=%lu\n", tin_rate); | 
 |  | 
 | 		tin_ns = NSEC_PER_SEC / tin_rate; | 
 | 		tcnt = period_ns / tin_ns; | 
 | 	} | 
 |  | 
 | 	/* Period is too short. */ | 
 | 	if (tcnt <= 1) | 
 | 		return -ERANGE; | 
 |  | 
 | 	/* Note that counters count down. */ | 
 | 	tcmp = duty_ns / tin_ns; | 
 |  | 
 | 	/* 0% duty is not available */ | 
 | 	if (!tcmp) | 
 | 		++tcmp; | 
 |  | 
 | 	tcmp = tcnt - tcmp; | 
 |  | 
 | 	/* Decrement to get tick numbers, instead of tick counts. */ | 
 | 	--tcnt; | 
 | 	/* -1UL will give 100% duty. */ | 
 | 	--tcmp; | 
 |  | 
 | 	dev_dbg(pwmchip_parent(chip), "tin_ns=%u, tcmp=%u/%u\n", tin_ns, tcmp, tcnt); | 
 |  | 
 | 	/* Update PWM registers. */ | 
 | 	writel(tcnt, our_chip->base + REG_TCNTB(pwm->hwpwm)); | 
 | 	writel(tcmp, our_chip->base + REG_TCMPB(pwm->hwpwm)); | 
 |  | 
 | 	/* | 
 | 	 * In case the PWM is currently at 100% duty cycle, force a manual | 
 | 	 * update to prevent the signal staying high if the PWM is disabled | 
 | 	 * shortly afer this update (before it autoreloaded the new values). | 
 | 	 */ | 
 | 	if (oldtcmp == (u32) -1) { | 
 | 		dev_dbg(pwmchip_parent(chip), "Forcing manual update"); | 
 | 		pwm_samsung_manual_update(our_chip, pwm); | 
 | 	} | 
 |  | 
 | 	chan->period_ns = period_ns; | 
 | 	chan->tin_ns = tin_ns; | 
 | 	chan->duty_ns = duty_ns; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int pwm_samsung_config(struct pwm_chip *chip, struct pwm_device *pwm, | 
 | 			      int duty_ns, int period_ns) | 
 | { | 
 | 	return __pwm_samsung_config(chip, pwm, duty_ns, period_ns, false); | 
 | } | 
 |  | 
 | static void pwm_samsung_set_invert(struct samsung_pwm_chip *our_chip, | 
 | 				   unsigned int channel, bool invert) | 
 | { | 
 | 	unsigned int tcon_chan = to_tcon_channel(channel); | 
 | 	unsigned long flags; | 
 | 	u32 tcon; | 
 |  | 
 | 	spin_lock_irqsave(&samsung_pwm_lock, flags); | 
 |  | 
 | 	tcon = readl(our_chip->base + REG_TCON); | 
 |  | 
 | 	if (invert) { | 
 | 		our_chip->inverter_mask |= BIT(channel); | 
 | 		tcon |= TCON_INVERT(tcon_chan); | 
 | 	} else { | 
 | 		our_chip->inverter_mask &= ~BIT(channel); | 
 | 		tcon &= ~TCON_INVERT(tcon_chan); | 
 | 	} | 
 |  | 
 | 	writel(tcon, our_chip->base + REG_TCON); | 
 |  | 
 | 	spin_unlock_irqrestore(&samsung_pwm_lock, flags); | 
 | } | 
 |  | 
 | static int pwm_samsung_set_polarity(struct pwm_chip *chip, | 
 | 				    struct pwm_device *pwm, | 
 | 				    enum pwm_polarity polarity) | 
 | { | 
 | 	struct samsung_pwm_chip *our_chip = to_samsung_pwm_chip(chip); | 
 | 	bool invert = (polarity == PWM_POLARITY_NORMAL); | 
 |  | 
 | 	/* Inverted means normal in the hardware. */ | 
 | 	pwm_samsung_set_invert(our_chip, pwm->hwpwm, invert); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int pwm_samsung_apply(struct pwm_chip *chip, struct pwm_device *pwm, | 
 | 			     const struct pwm_state *state) | 
 | { | 
 | 	int err, enabled = pwm->state.enabled; | 
 |  | 
 | 	if (state->polarity != pwm->state.polarity) { | 
 | 		if (enabled) { | 
 | 			pwm_samsung_disable(chip, pwm); | 
 | 			enabled = false; | 
 | 		} | 
 |  | 
 | 		err = pwm_samsung_set_polarity(chip, pwm, state->polarity); | 
 | 		if (err) | 
 | 			return err; | 
 | 	} | 
 |  | 
 | 	if (!state->enabled) { | 
 | 		if (enabled) | 
 | 			pwm_samsung_disable(chip, pwm); | 
 |  | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * We currently avoid using 64bit arithmetic by using the | 
 | 	 * fact that anything faster than 1Hz is easily representable | 
 | 	 * by 32bits. | 
 | 	 */ | 
 | 	if (state->period > NSEC_PER_SEC) | 
 | 		return -ERANGE; | 
 |  | 
 | 	err = pwm_samsung_config(chip, pwm, state->duty_cycle, state->period); | 
 | 	if (err) | 
 | 		return err; | 
 |  | 
 | 	if (!pwm->state.enabled) | 
 | 		err = pwm_samsung_enable(chip, pwm); | 
 |  | 
 | 	return err; | 
 | } | 
 |  | 
 | static const struct pwm_ops pwm_samsung_ops = { | 
 | 	.request	= pwm_samsung_request, | 
 | 	.apply		= pwm_samsung_apply, | 
 | }; | 
 |  | 
 | #ifdef CONFIG_OF | 
 | static const struct samsung_pwm_variant s3c24xx_variant = { | 
 | 	.bits		= 16, | 
 | 	.div_base	= 1, | 
 | 	.has_tint_cstat	= false, | 
 | 	.tclk_mask	= BIT(4), | 
 | }; | 
 |  | 
 | static const struct samsung_pwm_variant s3c64xx_variant = { | 
 | 	.bits		= 32, | 
 | 	.div_base	= 0, | 
 | 	.has_tint_cstat	= true, | 
 | 	.tclk_mask	= BIT(7) | BIT(6) | BIT(5), | 
 | }; | 
 |  | 
 | static const struct samsung_pwm_variant s5p64x0_variant = { | 
 | 	.bits		= 32, | 
 | 	.div_base	= 0, | 
 | 	.has_tint_cstat	= true, | 
 | 	.tclk_mask	= 0, | 
 | }; | 
 |  | 
 | static const struct samsung_pwm_variant s5pc100_variant = { | 
 | 	.bits		= 32, | 
 | 	.div_base	= 0, | 
 | 	.has_tint_cstat	= true, | 
 | 	.tclk_mask	= BIT(5), | 
 | }; | 
 |  | 
 | static const struct of_device_id samsung_pwm_matches[] = { | 
 | 	{ .compatible = "samsung,s3c2410-pwm", .data = &s3c24xx_variant }, | 
 | 	{ .compatible = "samsung,s3c6400-pwm", .data = &s3c64xx_variant }, | 
 | 	{ .compatible = "samsung,s5p6440-pwm", .data = &s5p64x0_variant }, | 
 | 	{ .compatible = "samsung,s5pc100-pwm", .data = &s5pc100_variant }, | 
 | 	{ .compatible = "samsung,exynos4210-pwm", .data = &s5p64x0_variant }, | 
 | 	{}, | 
 | }; | 
 | MODULE_DEVICE_TABLE(of, samsung_pwm_matches); | 
 |  | 
 | static int pwm_samsung_parse_dt(struct pwm_chip *chip) | 
 | { | 
 | 	struct samsung_pwm_chip *our_chip = to_samsung_pwm_chip(chip); | 
 | 	struct device_node *np = pwmchip_parent(chip)->of_node; | 
 | 	const struct of_device_id *match; | 
 | 	u32 val; | 
 |  | 
 | 	match = of_match_node(samsung_pwm_matches, np); | 
 | 	if (!match) | 
 | 		return -ENODEV; | 
 |  | 
 | 	memcpy(&our_chip->variant, match->data, sizeof(our_chip->variant)); | 
 |  | 
 | 	of_property_for_each_u32(np, "samsung,pwm-outputs", val) { | 
 | 		if (val >= SAMSUNG_PWM_NUM) { | 
 | 			dev_err(pwmchip_parent(chip), | 
 | 				"%s: invalid channel index in samsung,pwm-outputs property\n", | 
 | 								__func__); | 
 | 			continue; | 
 | 		} | 
 | 		our_chip->variant.output_mask |= BIT(val); | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 | #else | 
 | static int pwm_samsung_parse_dt(struct pwm_chip *chip) | 
 | { | 
 | 	return -ENODEV; | 
 | } | 
 | #endif | 
 |  | 
 | static int pwm_samsung_probe(struct platform_device *pdev) | 
 | { | 
 | 	struct device *dev = &pdev->dev; | 
 | 	struct samsung_pwm_chip *our_chip; | 
 | 	struct pwm_chip *chip; | 
 | 	unsigned int chan; | 
 | 	int ret; | 
 |  | 
 | 	chip = devm_pwmchip_alloc(&pdev->dev, SAMSUNG_PWM_NUM, sizeof(*our_chip)); | 
 | 	if (IS_ERR(chip)) | 
 | 		return PTR_ERR(chip); | 
 | 	our_chip = to_samsung_pwm_chip(chip); | 
 |  | 
 | 	chip->ops = &pwm_samsung_ops; | 
 | 	our_chip->inverter_mask = BIT(SAMSUNG_PWM_NUM) - 1; | 
 |  | 
 | 	if (IS_ENABLED(CONFIG_OF) && pdev->dev.of_node) { | 
 | 		ret = pwm_samsung_parse_dt(chip); | 
 | 		if (ret) | 
 | 			return ret; | 
 | 	} else { | 
 | 		if (!pdev->dev.platform_data) | 
 | 			return dev_err_probe(&pdev->dev, -EINVAL, | 
 | 					     "no platform data specified\n"); | 
 |  | 
 | 		memcpy(&our_chip->variant, pdev->dev.platform_data, | 
 | 							sizeof(our_chip->variant)); | 
 | 	} | 
 |  | 
 | 	our_chip->base = devm_platform_ioremap_resource(pdev, 0); | 
 | 	if (IS_ERR(our_chip->base)) | 
 | 		return PTR_ERR(our_chip->base); | 
 |  | 
 | 	our_chip->base_clk = devm_clk_get_enabled(&pdev->dev, "timers"); | 
 | 	if (IS_ERR(our_chip->base_clk)) | 
 | 		return dev_err_probe(dev, PTR_ERR(our_chip->base_clk), | 
 | 				     "failed to get timer base clk\n"); | 
 |  | 
 | 	for (chan = 0; chan < SAMSUNG_PWM_NUM; ++chan) | 
 | 		if (our_chip->variant.output_mask & BIT(chan)) | 
 | 			pwm_samsung_set_invert(our_chip, chan, true); | 
 |  | 
 | 	/* Following clocks are optional. */ | 
 | 	our_chip->tclk0 = devm_clk_get(&pdev->dev, "pwm-tclk0"); | 
 | 	our_chip->tclk1 = devm_clk_get(&pdev->dev, "pwm-tclk1"); | 
 |  | 
 | 	platform_set_drvdata(pdev, chip); | 
 |  | 
 | 	ret = devm_pwmchip_add(&pdev->dev, chip); | 
 | 	if (ret < 0) | 
 | 		return dev_err_probe(dev, ret, "failed to register PWM chip\n"); | 
 |  | 
 | 	dev_dbg(dev, "base_clk at %lu, tclk0 at %lu, tclk1 at %lu\n", | 
 | 		clk_get_rate(our_chip->base_clk), | 
 | 		!IS_ERR(our_chip->tclk0) ? clk_get_rate(our_chip->tclk0) : 0, | 
 | 		!IS_ERR(our_chip->tclk1) ? clk_get_rate(our_chip->tclk1) : 0); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int pwm_samsung_resume(struct device *dev) | 
 | { | 
 | 	struct pwm_chip *chip = dev_get_drvdata(dev); | 
 | 	struct samsung_pwm_chip *our_chip = to_samsung_pwm_chip(chip); | 
 | 	unsigned int i; | 
 |  | 
 | 	for (i = 0; i < SAMSUNG_PWM_NUM; i++) { | 
 | 		struct pwm_device *pwm = &chip->pwms[i]; | 
 | 		struct samsung_pwm_channel *chan = &our_chip->channel[i]; | 
 |  | 
 | 		if (!test_bit(PWMF_REQUESTED, &pwm->flags)) | 
 | 			continue; | 
 |  | 
 | 		if (our_chip->variant.output_mask & BIT(i)) | 
 | 			pwm_samsung_set_invert(our_chip, i, | 
 | 					our_chip->inverter_mask & BIT(i)); | 
 |  | 
 | 		if (chan->period_ns) { | 
 | 			__pwm_samsung_config(chip, pwm, chan->duty_ns, | 
 | 					     chan->period_ns, true); | 
 | 			/* needed to make PWM disable work on Odroid-XU3 */ | 
 | 			pwm_samsung_manual_update(our_chip, pwm); | 
 | 		} | 
 |  | 
 | 		if (our_chip->disabled_mask & BIT(i)) | 
 | 			pwm_samsung_disable(chip, pwm); | 
 | 		else | 
 | 			pwm_samsung_enable(chip, pwm); | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static DEFINE_SIMPLE_DEV_PM_OPS(pwm_samsung_pm_ops, NULL, pwm_samsung_resume); | 
 |  | 
 | static struct platform_driver pwm_samsung_driver = { | 
 | 	.driver		= { | 
 | 		.name	= "samsung-pwm", | 
 | 		.pm	= pm_ptr(&pwm_samsung_pm_ops), | 
 | 		.of_match_table = of_match_ptr(samsung_pwm_matches), | 
 | 	}, | 
 | 	.probe		= pwm_samsung_probe, | 
 | }; | 
 | module_platform_driver(pwm_samsung_driver); | 
 |  | 
 | MODULE_DESCRIPTION("Samsung Pulse Width Modulator driver"); | 
 | MODULE_LICENSE("GPL"); | 
 | MODULE_AUTHOR("Tomasz Figa <tomasz.figa@gmail.com>"); | 
 | MODULE_ALIAS("platform:samsung-pwm"); |