| // SPDX-License-Identifier: GPL-2.0-only | 
 | /* | 
 |  * Copyright (C) 2020 BAIKAL ELECTRONICS, JSC | 
 |  * | 
 |  * Authors: | 
 |  *   Serge Semin <Sergey.Semin@baikalelectronics.ru> | 
 |  * | 
 |  * Baikal-T1 APB-bus driver | 
 |  */ | 
 |  | 
 | #include <linux/kernel.h> | 
 | #include <linux/module.h> | 
 | #include <linux/types.h> | 
 | #include <linux/device.h> | 
 | #include <linux/atomic.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/interrupt.h> | 
 | #include <linux/io.h> | 
 | #include <linux/nmi.h> | 
 | #include <linux/of.h> | 
 | #include <linux/regmap.h> | 
 | #include <linux/clk.h> | 
 | #include <linux/reset.h> | 
 | #include <linux/time64.h> | 
 | #include <linux/sysfs.h> | 
 |  | 
 | #define APB_EHB_ISR			0x00 | 
 | #define APB_EHB_ISR_PENDING		BIT(0) | 
 | #define APB_EHB_ISR_MASK		BIT(1) | 
 | #define APB_EHB_ADDR			0x04 | 
 | #define APB_EHB_TIMEOUT			0x08 | 
 |  | 
 | #define APB_EHB_TIMEOUT_MIN		0x000003FFU | 
 | #define APB_EHB_TIMEOUT_MAX		0xFFFFFFFFU | 
 |  | 
 | /* | 
 |  * struct bt1_apb - Baikal-T1 APB EHB private data | 
 |  * @dev: Pointer to the device structure. | 
 |  * @regs: APB EHB registers map. | 
 |  * @res: No-device error injection memory region. | 
 |  * @irq: Errors IRQ number. | 
 |  * @rate: APB-bus reference clock rate. | 
 |  * @pclk: APB-reference clock. | 
 |  * @prst: APB domain reset line. | 
 |  * @count: Number of errors detected. | 
 |  */ | 
 | struct bt1_apb { | 
 | 	struct device *dev; | 
 |  | 
 | 	struct regmap *regs; | 
 | 	void __iomem *res; | 
 | 	int irq; | 
 |  | 
 | 	unsigned long rate; | 
 | 	struct clk *pclk; | 
 |  | 
 | 	struct reset_control *prst; | 
 |  | 
 | 	atomic_t count; | 
 | }; | 
 |  | 
 | static const struct regmap_config bt1_apb_regmap_cfg = { | 
 | 	.reg_bits = 32, | 
 | 	.val_bits = 32, | 
 | 	.reg_stride = 4, | 
 | 	.max_register = APB_EHB_TIMEOUT, | 
 | 	.fast_io = true | 
 | }; | 
 |  | 
 | static inline unsigned long bt1_apb_n_to_timeout_us(struct bt1_apb *apb, u32 n) | 
 | { | 
 | 	u64 timeout = (u64)n * USEC_PER_SEC; | 
 |  | 
 | 	do_div(timeout, apb->rate); | 
 |  | 
 | 	return timeout; | 
 |  | 
 | } | 
 |  | 
 | static inline unsigned long bt1_apb_timeout_to_n_us(struct bt1_apb *apb, | 
 | 						    unsigned long timeout) | 
 | { | 
 | 	u64 n = (u64)timeout * apb->rate; | 
 |  | 
 | 	do_div(n, USEC_PER_SEC); | 
 |  | 
 | 	return n; | 
 |  | 
 | } | 
 |  | 
 | static irqreturn_t bt1_apb_isr(int irq, void *data) | 
 | { | 
 | 	struct bt1_apb *apb = data; | 
 | 	u32 addr = 0; | 
 |  | 
 | 	regmap_read(apb->regs, APB_EHB_ADDR, &addr); | 
 |  | 
 | 	dev_crit_ratelimited(apb->dev, | 
 | 		"APB-bus fault %d: Slave access timeout at 0x%08x\n", | 
 | 		atomic_inc_return(&apb->count), | 
 | 		addr); | 
 |  | 
 | 	/* | 
 | 	 * Print backtrace on each CPU. This might be pointless if the fault | 
 | 	 * has happened on the same CPU as the IRQ handler is executed or | 
 | 	 * the other core proceeded further execution despite the error. | 
 | 	 * But if it's not, by looking at the trace we would get straight to | 
 | 	 * the cause of the problem. | 
 | 	 */ | 
 | 	trigger_all_cpu_backtrace(); | 
 |  | 
 | 	regmap_update_bits(apb->regs, APB_EHB_ISR, APB_EHB_ISR_PENDING, 0); | 
 |  | 
 | 	return IRQ_HANDLED; | 
 | } | 
 |  | 
 | static void bt1_apb_clear_data(void *data) | 
 | { | 
 | 	struct bt1_apb *apb = data; | 
 | 	struct platform_device *pdev = to_platform_device(apb->dev); | 
 |  | 
 | 	platform_set_drvdata(pdev, NULL); | 
 | } | 
 |  | 
 | static struct bt1_apb *bt1_apb_create_data(struct platform_device *pdev) | 
 | { | 
 | 	struct device *dev = &pdev->dev; | 
 | 	struct bt1_apb *apb; | 
 | 	int ret; | 
 |  | 
 | 	apb = devm_kzalloc(dev, sizeof(*apb), GFP_KERNEL); | 
 | 	if (!apb) | 
 | 		return ERR_PTR(-ENOMEM); | 
 |  | 
 | 	ret = devm_add_action(dev, bt1_apb_clear_data, apb); | 
 | 	if (ret) { | 
 | 		dev_err(dev, "Can't add APB EHB data clear action\n"); | 
 | 		return ERR_PTR(ret); | 
 | 	} | 
 |  | 
 | 	apb->dev = dev; | 
 | 	atomic_set(&apb->count, 0); | 
 | 	platform_set_drvdata(pdev, apb); | 
 |  | 
 | 	return apb; | 
 | } | 
 |  | 
 | static int bt1_apb_request_regs(struct bt1_apb *apb) | 
 | { | 
 | 	struct platform_device *pdev = to_platform_device(apb->dev); | 
 | 	void __iomem *regs; | 
 |  | 
 | 	regs = devm_platform_ioremap_resource_byname(pdev, "ehb"); | 
 | 	if (IS_ERR(regs)) { | 
 | 		dev_err(apb->dev, "Couldn't map APB EHB registers\n"); | 
 | 		return PTR_ERR(regs); | 
 | 	} | 
 |  | 
 | 	apb->regs = devm_regmap_init_mmio(apb->dev, regs, &bt1_apb_regmap_cfg); | 
 | 	if (IS_ERR(apb->regs)) { | 
 | 		dev_err(apb->dev, "Couldn't create APB EHB regmap\n"); | 
 | 		return PTR_ERR(apb->regs); | 
 | 	} | 
 |  | 
 | 	apb->res = devm_platform_ioremap_resource_byname(pdev, "nodev"); | 
 | 	if (IS_ERR(apb->res)) | 
 | 		dev_err(apb->dev, "Couldn't map reserved region\n"); | 
 |  | 
 | 	return PTR_ERR_OR_ZERO(apb->res); | 
 | } | 
 |  | 
 | static int bt1_apb_request_rst(struct bt1_apb *apb) | 
 | { | 
 | 	int ret; | 
 |  | 
 | 	apb->prst = devm_reset_control_get_optional_exclusive(apb->dev, "prst"); | 
 | 	if (IS_ERR(apb->prst)) | 
 | 		return dev_err_probe(apb->dev, PTR_ERR(apb->prst), | 
 | 				     "Couldn't get reset control line\n"); | 
 |  | 
 | 	ret = reset_control_deassert(apb->prst); | 
 | 	if (ret) | 
 | 		dev_err(apb->dev, "Failed to deassert the reset line\n"); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int bt1_apb_request_clk(struct bt1_apb *apb) | 
 | { | 
 | 	apb->pclk = devm_clk_get_enabled(apb->dev, "pclk"); | 
 | 	if (IS_ERR(apb->pclk)) | 
 | 		return dev_err_probe(apb->dev, PTR_ERR(apb->pclk), | 
 | 				     "Couldn't get APB clock descriptor\n"); | 
 |  | 
 | 	apb->rate = clk_get_rate(apb->pclk); | 
 | 	if (!apb->rate) { | 
 | 		dev_err(apb->dev, "Invalid clock rate\n"); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void bt1_apb_clear_irq(void *data) | 
 | { | 
 | 	struct bt1_apb *apb = data; | 
 |  | 
 | 	regmap_update_bits(apb->regs, APB_EHB_ISR, APB_EHB_ISR_MASK, 0); | 
 | } | 
 |  | 
 | static int bt1_apb_request_irq(struct bt1_apb *apb) | 
 | { | 
 | 	struct platform_device *pdev = to_platform_device(apb->dev); | 
 | 	int ret; | 
 |  | 
 | 	apb->irq = platform_get_irq(pdev, 0); | 
 | 	if (apb->irq < 0) | 
 | 		return apb->irq; | 
 |  | 
 | 	ret = devm_request_irq(apb->dev, apb->irq, bt1_apb_isr, IRQF_SHARED, | 
 | 			       "bt1-apb", apb); | 
 | 	if (ret) { | 
 | 		dev_err(apb->dev, "Couldn't request APB EHB IRQ\n"); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	ret = devm_add_action(apb->dev, bt1_apb_clear_irq, apb); | 
 | 	if (ret) { | 
 | 		dev_err(apb->dev, "Can't add APB EHB IRQs clear action\n"); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	/* Unmask IRQ and clear it' pending flag. */ | 
 | 	regmap_update_bits(apb->regs, APB_EHB_ISR, | 
 | 			   APB_EHB_ISR_PENDING | APB_EHB_ISR_MASK, | 
 | 			   APB_EHB_ISR_MASK); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static ssize_t count_show(struct device *dev, struct device_attribute *attr, | 
 | 			  char *buf) | 
 | { | 
 | 	struct bt1_apb *apb = dev_get_drvdata(dev); | 
 |  | 
 | 	return scnprintf(buf, PAGE_SIZE, "%d\n", atomic_read(&apb->count)); | 
 | } | 
 | static DEVICE_ATTR_RO(count); | 
 |  | 
 | static ssize_t timeout_show(struct device *dev, struct device_attribute *attr, | 
 | 			    char *buf) | 
 | { | 
 | 	struct bt1_apb *apb = dev_get_drvdata(dev); | 
 | 	unsigned long timeout; | 
 | 	int ret; | 
 | 	u32 n; | 
 |  | 
 | 	ret = regmap_read(apb->regs, APB_EHB_TIMEOUT, &n); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	timeout = bt1_apb_n_to_timeout_us(apb, n); | 
 |  | 
 | 	return scnprintf(buf, PAGE_SIZE, "%lu\n", timeout); | 
 | } | 
 |  | 
 | static ssize_t timeout_store(struct device *dev, | 
 | 			     struct device_attribute *attr, | 
 | 			     const char *buf, size_t count) | 
 | { | 
 | 	struct bt1_apb *apb = dev_get_drvdata(dev); | 
 | 	unsigned long timeout; | 
 | 	int ret; | 
 | 	u32 n; | 
 |  | 
 | 	if (kstrtoul(buf, 0, &timeout) < 0) | 
 | 		return -EINVAL; | 
 |  | 
 | 	n = bt1_apb_timeout_to_n_us(apb, timeout); | 
 | 	n = clamp(n, APB_EHB_TIMEOUT_MIN, APB_EHB_TIMEOUT_MAX); | 
 |  | 
 | 	ret = regmap_write(apb->regs, APB_EHB_TIMEOUT, n); | 
 |  | 
 | 	return ret ?: count; | 
 | } | 
 | static DEVICE_ATTR_RW(timeout); | 
 |  | 
 | static ssize_t inject_error_show(struct device *dev, | 
 | 				 struct device_attribute *attr, char *buf) | 
 | { | 
 | 	return scnprintf(buf, PAGE_SIZE, "Error injection: nodev irq\n"); | 
 | } | 
 |  | 
 | static ssize_t inject_error_store(struct device *dev, | 
 | 				  struct device_attribute *attr, | 
 | 				  const char *data, size_t count) | 
 | { | 
 | 	struct bt1_apb *apb = dev_get_drvdata(dev); | 
 |  | 
 | 	/* | 
 | 	 * Either dummy read from the unmapped address in the APB IO area | 
 | 	 * or manually set the IRQ status. | 
 | 	 */ | 
 | 	if (sysfs_streq(data, "nodev")) | 
 | 		readl(apb->res); | 
 | 	else if (sysfs_streq(data, "irq")) | 
 | 		regmap_update_bits(apb->regs, APB_EHB_ISR, APB_EHB_ISR_PENDING, | 
 | 				   APB_EHB_ISR_PENDING); | 
 | 	else | 
 | 		return -EINVAL; | 
 |  | 
 | 	return count; | 
 | } | 
 | static DEVICE_ATTR_RW(inject_error); | 
 |  | 
 | static struct attribute *bt1_apb_sysfs_attrs[] = { | 
 | 	&dev_attr_count.attr, | 
 | 	&dev_attr_timeout.attr, | 
 | 	&dev_attr_inject_error.attr, | 
 | 	NULL | 
 | }; | 
 | ATTRIBUTE_GROUPS(bt1_apb_sysfs); | 
 |  | 
 | static void bt1_apb_remove_sysfs(void *data) | 
 | { | 
 | 	struct bt1_apb *apb = data; | 
 |  | 
 | 	device_remove_groups(apb->dev, bt1_apb_sysfs_groups); | 
 | } | 
 |  | 
 | static int bt1_apb_init_sysfs(struct bt1_apb *apb) | 
 | { | 
 | 	int ret; | 
 |  | 
 | 	ret = device_add_groups(apb->dev, bt1_apb_sysfs_groups); | 
 | 	if (ret) { | 
 | 		dev_err(apb->dev, "Failed to create EHB APB sysfs nodes\n"); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	ret = devm_add_action_or_reset(apb->dev, bt1_apb_remove_sysfs, apb); | 
 | 	if (ret) | 
 | 		dev_err(apb->dev, "Can't add APB EHB sysfs remove action\n"); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int bt1_apb_probe(struct platform_device *pdev) | 
 | { | 
 | 	struct bt1_apb *apb; | 
 | 	int ret; | 
 |  | 
 | 	apb = bt1_apb_create_data(pdev); | 
 | 	if (IS_ERR(apb)) | 
 | 		return PTR_ERR(apb); | 
 |  | 
 | 	ret = bt1_apb_request_regs(apb); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	ret = bt1_apb_request_rst(apb); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	ret = bt1_apb_request_clk(apb); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	ret = bt1_apb_request_irq(apb); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	ret = bt1_apb_init_sysfs(apb); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct of_device_id bt1_apb_of_match[] = { | 
 | 	{ .compatible = "baikal,bt1-apb" }, | 
 | 	{ } | 
 | }; | 
 | MODULE_DEVICE_TABLE(of, bt1_apb_of_match); | 
 |  | 
 | static struct platform_driver bt1_apb_driver = { | 
 | 	.probe = bt1_apb_probe, | 
 | 	.driver = { | 
 | 		.name = "bt1-apb", | 
 | 		.of_match_table = bt1_apb_of_match | 
 | 	} | 
 | }; | 
 | module_platform_driver(bt1_apb_driver); | 
 |  | 
 | MODULE_AUTHOR("Serge Semin <Sergey.Semin@baikalelectronics.ru>"); | 
 | MODULE_DESCRIPTION("Baikal-T1 APB-bus driver"); |