|  | // SPDX-License-Identifier: GPL-2.0 | 
|  | /* | 
|  | * Real Time Clock driver for Marvell 88PM80x PMIC | 
|  | * | 
|  | * Copyright (c) 2012 Marvell International Ltd. | 
|  | *  Wenzeng Chen<wzch@marvell.com> | 
|  | *  Qiao Zhou <zhouqiao@marvell.com> | 
|  | */ | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/regmap.h> | 
|  | #include <linux/mfd/core.h> | 
|  | #include <linux/mfd/88pm80x.h> | 
|  | #include <linux/rtc.h> | 
|  |  | 
|  | #define PM800_RTC_COUNTER1		(0xD1) | 
|  | #define PM800_RTC_COUNTER2		(0xD2) | 
|  | #define PM800_RTC_COUNTER3		(0xD3) | 
|  | #define PM800_RTC_COUNTER4		(0xD4) | 
|  | #define PM800_RTC_EXPIRE1_1		(0xD5) | 
|  | #define PM800_RTC_EXPIRE1_2		(0xD6) | 
|  | #define PM800_RTC_EXPIRE1_3		(0xD7) | 
|  | #define PM800_RTC_EXPIRE1_4		(0xD8) | 
|  | #define PM800_RTC_TRIM1			(0xD9) | 
|  | #define PM800_RTC_TRIM2			(0xDA) | 
|  | #define PM800_RTC_TRIM3			(0xDB) | 
|  | #define PM800_RTC_TRIM4			(0xDC) | 
|  | #define PM800_RTC_EXPIRE2_1		(0xDD) | 
|  | #define PM800_RTC_EXPIRE2_2		(0xDE) | 
|  | #define PM800_RTC_EXPIRE2_3		(0xDF) | 
|  | #define PM800_RTC_EXPIRE2_4		(0xE0) | 
|  |  | 
|  | #define PM800_POWER_DOWN_LOG1	(0xE5) | 
|  | #define PM800_POWER_DOWN_LOG2	(0xE6) | 
|  |  | 
|  | struct pm80x_rtc_info { | 
|  | struct pm80x_chip *chip; | 
|  | struct regmap *map; | 
|  | struct rtc_device *rtc_dev; | 
|  | struct device *dev; | 
|  |  | 
|  | int irq; | 
|  | }; | 
|  |  | 
|  | static irqreturn_t rtc_update_handler(int irq, void *data) | 
|  | { | 
|  | struct pm80x_rtc_info *info = (struct pm80x_rtc_info *)data; | 
|  | int mask; | 
|  |  | 
|  | mask = PM800_ALARM | PM800_ALARM_WAKEUP; | 
|  | regmap_update_bits(info->map, PM800_RTC_CONTROL, mask | PM800_ALARM1_EN, | 
|  | mask); | 
|  | rtc_update_irq(info->rtc_dev, 1, RTC_AF); | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | static int pm80x_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled) | 
|  | { | 
|  | struct pm80x_rtc_info *info = dev_get_drvdata(dev); | 
|  |  | 
|  | if (enabled) | 
|  | regmap_update_bits(info->map, PM800_RTC_CONTROL, | 
|  | PM800_ALARM1_EN, PM800_ALARM1_EN); | 
|  | else | 
|  | regmap_update_bits(info->map, PM800_RTC_CONTROL, | 
|  | PM800_ALARM1_EN, 0); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Calculate the next alarm time given the requested alarm time mask | 
|  | * and the current time. | 
|  | */ | 
|  | static void rtc_next_alarm_time(struct rtc_time *next, struct rtc_time *now, | 
|  | struct rtc_time *alrm) | 
|  | { | 
|  | unsigned long next_time; | 
|  | unsigned long now_time; | 
|  |  | 
|  | next->tm_year = now->tm_year; | 
|  | next->tm_mon = now->tm_mon; | 
|  | next->tm_mday = now->tm_mday; | 
|  | next->tm_hour = alrm->tm_hour; | 
|  | next->tm_min = alrm->tm_min; | 
|  | next->tm_sec = alrm->tm_sec; | 
|  |  | 
|  | now_time = rtc_tm_to_time64(now); | 
|  | next_time = rtc_tm_to_time64(next); | 
|  |  | 
|  | if (next_time < now_time) { | 
|  | /* Advance one day */ | 
|  | next_time += 60 * 60 * 24; | 
|  | rtc_time64_to_tm(next_time, next); | 
|  | } | 
|  | } | 
|  |  | 
|  | static int pm80x_rtc_read_time(struct device *dev, struct rtc_time *tm) | 
|  | { | 
|  | struct pm80x_rtc_info *info = dev_get_drvdata(dev); | 
|  | unsigned char buf[4]; | 
|  | unsigned long ticks, base, data; | 
|  | regmap_raw_read(info->map, PM800_RTC_EXPIRE2_1, buf, 4); | 
|  | base = ((unsigned long)buf[3] << 24) | (buf[2] << 16) | | 
|  | (buf[1] << 8) | buf[0]; | 
|  | dev_dbg(info->dev, "%x-%x-%x-%x\n", buf[0], buf[1], buf[2], buf[3]); | 
|  |  | 
|  | /* load 32-bit read-only counter */ | 
|  | regmap_raw_read(info->map, PM800_RTC_COUNTER1, buf, 4); | 
|  | data = ((unsigned long)buf[3] << 24) | (buf[2] << 16) | | 
|  | (buf[1] << 8) | buf[0]; | 
|  | ticks = base + data; | 
|  | dev_dbg(info->dev, "get base:0x%lx, RO count:0x%lx, ticks:0x%lx\n", | 
|  | base, data, ticks); | 
|  | rtc_time64_to_tm(ticks, tm); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int pm80x_rtc_set_time(struct device *dev, struct rtc_time *tm) | 
|  | { | 
|  | struct pm80x_rtc_info *info = dev_get_drvdata(dev); | 
|  | unsigned char buf[4]; | 
|  | unsigned long ticks, base, data; | 
|  |  | 
|  | ticks = rtc_tm_to_time64(tm); | 
|  |  | 
|  | /* load 32-bit read-only counter */ | 
|  | regmap_raw_read(info->map, PM800_RTC_COUNTER1, buf, 4); | 
|  | data = ((unsigned long)buf[3] << 24) | (buf[2] << 16) | | 
|  | (buf[1] << 8) | buf[0]; | 
|  | base = ticks - data; | 
|  | dev_dbg(info->dev, "set base:0x%lx, RO count:0x%lx, ticks:0x%lx\n", | 
|  | base, data, ticks); | 
|  | buf[0] = base & 0xFF; | 
|  | buf[1] = (base >> 8) & 0xFF; | 
|  | buf[2] = (base >> 16) & 0xFF; | 
|  | buf[3] = (base >> 24) & 0xFF; | 
|  | regmap_raw_write(info->map, PM800_RTC_EXPIRE2_1, buf, 4); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int pm80x_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) | 
|  | { | 
|  | struct pm80x_rtc_info *info = dev_get_drvdata(dev); | 
|  | unsigned char buf[4]; | 
|  | unsigned long ticks, base, data; | 
|  | int ret; | 
|  |  | 
|  | regmap_raw_read(info->map, PM800_RTC_EXPIRE2_1, buf, 4); | 
|  | base = ((unsigned long)buf[3] << 24) | (buf[2] << 16) | | 
|  | (buf[1] << 8) | buf[0]; | 
|  | dev_dbg(info->dev, "%x-%x-%x-%x\n", buf[0], buf[1], buf[2], buf[3]); | 
|  |  | 
|  | regmap_raw_read(info->map, PM800_RTC_EXPIRE1_1, buf, 4); | 
|  | data = ((unsigned long)buf[3] << 24) | (buf[2] << 16) | | 
|  | (buf[1] << 8) | buf[0]; | 
|  | ticks = base + data; | 
|  | dev_dbg(info->dev, "get base:0x%lx, RO count:0x%lx, ticks:0x%lx\n", | 
|  | base, data, ticks); | 
|  |  | 
|  | rtc_time64_to_tm(ticks, &alrm->time); | 
|  | regmap_read(info->map, PM800_RTC_CONTROL, &ret); | 
|  | alrm->enabled = (ret & PM800_ALARM1_EN) ? 1 : 0; | 
|  | alrm->pending = (ret & (PM800_ALARM | PM800_ALARM_WAKEUP)) ? 1 : 0; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int pm80x_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) | 
|  | { | 
|  | struct pm80x_rtc_info *info = dev_get_drvdata(dev); | 
|  | struct rtc_time now_tm, alarm_tm; | 
|  | unsigned long ticks, base, data; | 
|  | unsigned char buf[4]; | 
|  | int mask; | 
|  |  | 
|  | regmap_update_bits(info->map, PM800_RTC_CONTROL, PM800_ALARM1_EN, 0); | 
|  |  | 
|  | regmap_raw_read(info->map, PM800_RTC_EXPIRE2_1, buf, 4); | 
|  | base = ((unsigned long)buf[3] << 24) | (buf[2] << 16) | | 
|  | (buf[1] << 8) | buf[0]; | 
|  | dev_dbg(info->dev, "%x-%x-%x-%x\n", buf[0], buf[1], buf[2], buf[3]); | 
|  |  | 
|  | /* load 32-bit read-only counter */ | 
|  | regmap_raw_read(info->map, PM800_RTC_COUNTER1, buf, 4); | 
|  | data = ((unsigned long)buf[3] << 24) | (buf[2] << 16) | | 
|  | (buf[1] << 8) | buf[0]; | 
|  | ticks = base + data; | 
|  | dev_dbg(info->dev, "get base:0x%lx, RO count:0x%lx, ticks:0x%lx\n", | 
|  | base, data, ticks); | 
|  |  | 
|  | rtc_time64_to_tm(ticks, &now_tm); | 
|  | dev_dbg(info->dev, "%s, now time : %lu\n", __func__, ticks); | 
|  | rtc_next_alarm_time(&alarm_tm, &now_tm, &alrm->time); | 
|  | /* get new ticks for alarm in 24 hours */ | 
|  | ticks = rtc_tm_to_time64(&alarm_tm); | 
|  | dev_dbg(info->dev, "%s, alarm time: %lu\n", __func__, ticks); | 
|  | data = ticks - base; | 
|  |  | 
|  | buf[0] = data & 0xff; | 
|  | buf[1] = (data >> 8) & 0xff; | 
|  | buf[2] = (data >> 16) & 0xff; | 
|  | buf[3] = (data >> 24) & 0xff; | 
|  | regmap_raw_write(info->map, PM800_RTC_EXPIRE1_1, buf, 4); | 
|  | if (alrm->enabled) { | 
|  | mask = PM800_ALARM | PM800_ALARM_WAKEUP | PM800_ALARM1_EN; | 
|  | regmap_update_bits(info->map, PM800_RTC_CONTROL, mask, mask); | 
|  | } else { | 
|  | mask = PM800_ALARM | PM800_ALARM_WAKEUP | PM800_ALARM1_EN; | 
|  | regmap_update_bits(info->map, PM800_RTC_CONTROL, mask, | 
|  | PM800_ALARM | PM800_ALARM_WAKEUP); | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct rtc_class_ops pm80x_rtc_ops = { | 
|  | .read_time = pm80x_rtc_read_time, | 
|  | .set_time = pm80x_rtc_set_time, | 
|  | .read_alarm = pm80x_rtc_read_alarm, | 
|  | .set_alarm = pm80x_rtc_set_alarm, | 
|  | .alarm_irq_enable = pm80x_rtc_alarm_irq_enable, | 
|  | }; | 
|  |  | 
|  | #ifdef CONFIG_PM_SLEEP | 
|  | static int pm80x_rtc_suspend(struct device *dev) | 
|  | { | 
|  | return pm80x_dev_suspend(dev); | 
|  | } | 
|  |  | 
|  | static int pm80x_rtc_resume(struct device *dev) | 
|  | { | 
|  | return pm80x_dev_resume(dev); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static SIMPLE_DEV_PM_OPS(pm80x_rtc_pm_ops, pm80x_rtc_suspend, pm80x_rtc_resume); | 
|  |  | 
|  | static int pm80x_rtc_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct pm80x_chip *chip = dev_get_drvdata(pdev->dev.parent); | 
|  | struct pm80x_rtc_pdata *pdata = dev_get_platdata(&pdev->dev); | 
|  | struct pm80x_rtc_info *info; | 
|  | struct device_node *node = pdev->dev.of_node; | 
|  | int ret; | 
|  |  | 
|  | if (!pdata && !node) { | 
|  | dev_err(&pdev->dev, | 
|  | "pm80x-rtc requires platform data or of_node\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (!pdata) { | 
|  | pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); | 
|  | if (!pdata) { | 
|  | dev_err(&pdev->dev, "failed to allocate memory\n"); | 
|  | return -ENOMEM; | 
|  | } | 
|  | } | 
|  |  | 
|  | info = | 
|  | devm_kzalloc(&pdev->dev, sizeof(struct pm80x_rtc_info), GFP_KERNEL); | 
|  | if (!info) | 
|  | return -ENOMEM; | 
|  | info->irq = platform_get_irq(pdev, 0); | 
|  | if (info->irq < 0) { | 
|  | ret = -EINVAL; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | info->chip = chip; | 
|  | info->map = chip->regmap; | 
|  | if (!info->map) { | 
|  | dev_err(&pdev->dev, "no regmap!\n"); | 
|  | ret = -EINVAL; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | info->dev = &pdev->dev; | 
|  | dev_set_drvdata(&pdev->dev, info); | 
|  |  | 
|  | info->rtc_dev = devm_rtc_allocate_device(&pdev->dev); | 
|  | if (IS_ERR(info->rtc_dev)) | 
|  | return PTR_ERR(info->rtc_dev); | 
|  |  | 
|  | ret = pm80x_request_irq(chip, info->irq, rtc_update_handler, | 
|  | IRQF_ONESHOT, "rtc", info); | 
|  | if (ret < 0) { | 
|  | dev_err(chip->dev, "Failed to request IRQ: #%d: %d\n", | 
|  | info->irq, ret); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | info->rtc_dev->ops = &pm80x_rtc_ops; | 
|  | info->rtc_dev->range_max = U32_MAX; | 
|  |  | 
|  | ret = devm_rtc_register_device(info->rtc_dev); | 
|  | if (ret) | 
|  | goto out_rtc; | 
|  |  | 
|  | /* | 
|  | * enable internal XO instead of internal 3.25MHz clock since it can | 
|  | * free running in PMIC power-down state. | 
|  | */ | 
|  | regmap_update_bits(info->map, PM800_RTC_CONTROL, PM800_RTC1_USE_XO, | 
|  | PM800_RTC1_USE_XO); | 
|  |  | 
|  | /* remember whether this power up is caused by PMIC RTC or not */ | 
|  | info->rtc_dev->dev.platform_data = &pdata->rtc_wakeup; | 
|  |  | 
|  | device_init_wakeup(&pdev->dev, true); | 
|  |  | 
|  | return 0; | 
|  | out_rtc: | 
|  | pm80x_free_irq(chip, info->irq, info); | 
|  | out: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void pm80x_rtc_remove(struct platform_device *pdev) | 
|  | { | 
|  | struct pm80x_rtc_info *info = platform_get_drvdata(pdev); | 
|  | pm80x_free_irq(info->chip, info->irq, info); | 
|  | } | 
|  |  | 
|  | static struct platform_driver pm80x_rtc_driver = { | 
|  | .driver = { | 
|  | .name = "88pm80x-rtc", | 
|  | .pm = &pm80x_rtc_pm_ops, | 
|  | }, | 
|  | .probe = pm80x_rtc_probe, | 
|  | .remove = pm80x_rtc_remove, | 
|  | }; | 
|  |  | 
|  | module_platform_driver(pm80x_rtc_driver); | 
|  |  | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_DESCRIPTION("Marvell 88PM80x RTC driver"); | 
|  | MODULE_AUTHOR("Qiao Zhou <zhouqiao@marvell.com>"); | 
|  | MODULE_ALIAS("platform:88pm80x-rtc"); |