|  | // SPDX-License-Identifier: GPL-2.0+ | 
|  | // | 
|  | // Copyright 2004-2008 Freescale Semiconductor, Inc. All Rights Reserved. | 
|  |  | 
|  | #include <linux/io.h> | 
|  | #include <linux/rtc.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/pm_wakeirq.h> | 
|  | #include <linux/clk.h> | 
|  | #include <linux/of.h> | 
|  |  | 
|  | #define RTC_INPUT_CLK_32768HZ	(0x00 << 5) | 
|  | #define RTC_INPUT_CLK_32000HZ	(0x01 << 5) | 
|  | #define RTC_INPUT_CLK_38400HZ	(0x02 << 5) | 
|  |  | 
|  | #define RTC_SW_BIT      (1 << 0) | 
|  | #define RTC_ALM_BIT     (1 << 2) | 
|  | #define RTC_1HZ_BIT     (1 << 4) | 
|  | #define RTC_2HZ_BIT     (1 << 7) | 
|  | #define RTC_SAM0_BIT    (1 << 8) | 
|  | #define RTC_SAM1_BIT    (1 << 9) | 
|  | #define RTC_SAM2_BIT    (1 << 10) | 
|  | #define RTC_SAM3_BIT    (1 << 11) | 
|  | #define RTC_SAM4_BIT    (1 << 12) | 
|  | #define RTC_SAM5_BIT    (1 << 13) | 
|  | #define RTC_SAM6_BIT    (1 << 14) | 
|  | #define RTC_SAM7_BIT    (1 << 15) | 
|  | #define PIT_ALL_ON      (RTC_2HZ_BIT | RTC_SAM0_BIT | RTC_SAM1_BIT | \ | 
|  | RTC_SAM2_BIT | RTC_SAM3_BIT | RTC_SAM4_BIT | \ | 
|  | RTC_SAM5_BIT | RTC_SAM6_BIT | RTC_SAM7_BIT) | 
|  |  | 
|  | #define RTC_ENABLE_BIT  (1 << 7) | 
|  |  | 
|  | #define MAX_PIE_NUM     9 | 
|  | #define MAX_PIE_FREQ    512 | 
|  |  | 
|  | #define MXC_RTC_TIME	0 | 
|  | #define MXC_RTC_ALARM	1 | 
|  |  | 
|  | #define RTC_HOURMIN	0x00	/*  32bit rtc hour/min counter reg */ | 
|  | #define RTC_SECOND	0x04	/*  32bit rtc seconds counter reg */ | 
|  | #define RTC_ALRM_HM	0x08	/*  32bit rtc alarm hour/min reg */ | 
|  | #define RTC_ALRM_SEC	0x0C	/*  32bit rtc alarm seconds reg */ | 
|  | #define RTC_RTCCTL	0x10	/*  32bit rtc control reg */ | 
|  | #define RTC_RTCISR	0x14	/*  32bit rtc interrupt status reg */ | 
|  | #define RTC_RTCIENR	0x18	/*  32bit rtc interrupt enable reg */ | 
|  | #define RTC_STPWCH	0x1C	/*  32bit rtc stopwatch min reg */ | 
|  | #define RTC_DAYR	0x20	/*  32bit rtc days counter reg */ | 
|  | #define RTC_DAYALARM	0x24	/*  32bit rtc day alarm reg */ | 
|  | #define RTC_TEST1	0x28	/*  32bit rtc test reg 1 */ | 
|  | #define RTC_TEST2	0x2C	/*  32bit rtc test reg 2 */ | 
|  | #define RTC_TEST3	0x30	/*  32bit rtc test reg 3 */ | 
|  |  | 
|  | enum imx_rtc_type { | 
|  | IMX1_RTC, | 
|  | IMX21_RTC, | 
|  | }; | 
|  |  | 
|  | struct rtc_plat_data { | 
|  | struct rtc_device *rtc; | 
|  | void __iomem *ioaddr; | 
|  | int irq; | 
|  | struct clk *clk_ref; | 
|  | struct clk *clk_ipg; | 
|  | struct rtc_time g_rtc_alarm; | 
|  | enum imx_rtc_type devtype; | 
|  | }; | 
|  |  | 
|  | static const struct of_device_id imx_rtc_dt_ids[] = { | 
|  | { .compatible = "fsl,imx1-rtc", .data = (const void *)IMX1_RTC }, | 
|  | { .compatible = "fsl,imx21-rtc", .data = (const void *)IMX21_RTC }, | 
|  | {} | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(of, imx_rtc_dt_ids); | 
|  |  | 
|  | static inline int is_imx1_rtc(struct rtc_plat_data *data) | 
|  | { | 
|  | return data->devtype == IMX1_RTC; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This function is used to obtain the RTC time or the alarm value in | 
|  | * second. | 
|  | */ | 
|  | static time64_t get_alarm_or_time(struct device *dev, int time_alarm) | 
|  | { | 
|  | struct rtc_plat_data *pdata = dev_get_drvdata(dev); | 
|  | void __iomem *ioaddr = pdata->ioaddr; | 
|  | u32 day = 0, hr = 0, min = 0, sec = 0, hr_min = 0; | 
|  |  | 
|  | switch (time_alarm) { | 
|  | case MXC_RTC_TIME: | 
|  | day = readw(ioaddr + RTC_DAYR); | 
|  | hr_min = readw(ioaddr + RTC_HOURMIN); | 
|  | sec = readw(ioaddr + RTC_SECOND); | 
|  | break; | 
|  | case MXC_RTC_ALARM: | 
|  | day = readw(ioaddr + RTC_DAYALARM); | 
|  | hr_min = readw(ioaddr + RTC_ALRM_HM) & 0xffff; | 
|  | sec = readw(ioaddr + RTC_ALRM_SEC); | 
|  | break; | 
|  | } | 
|  |  | 
|  | hr = hr_min >> 8; | 
|  | min = hr_min & 0xff; | 
|  |  | 
|  | return ((((time64_t)day * 24 + hr) * 60) + min) * 60 + sec; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This function sets the RTC alarm value or the time value. | 
|  | */ | 
|  | static void set_alarm_or_time(struct device *dev, int time_alarm, time64_t time) | 
|  | { | 
|  | u32 tod, day, hr, min, sec, temp; | 
|  | struct rtc_plat_data *pdata = dev_get_drvdata(dev); | 
|  | void __iomem *ioaddr = pdata->ioaddr; | 
|  |  | 
|  | day = div_s64_rem(time, 86400, &tod); | 
|  |  | 
|  | /* time is within a day now */ | 
|  | hr = tod / 3600; | 
|  | tod -= hr * 3600; | 
|  |  | 
|  | /* time is within an hour now */ | 
|  | min = tod / 60; | 
|  | sec = tod - min * 60; | 
|  |  | 
|  | temp = (hr << 8) + min; | 
|  |  | 
|  | switch (time_alarm) { | 
|  | case MXC_RTC_TIME: | 
|  | writew(day, ioaddr + RTC_DAYR); | 
|  | writew(sec, ioaddr + RTC_SECOND); | 
|  | writew(temp, ioaddr + RTC_HOURMIN); | 
|  | break; | 
|  | case MXC_RTC_ALARM: | 
|  | writew(day, ioaddr + RTC_DAYALARM); | 
|  | writew(sec, ioaddr + RTC_ALRM_SEC); | 
|  | writew(temp, ioaddr + RTC_ALRM_HM); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This function updates the RTC alarm registers and then clears all the | 
|  | * interrupt status bits. | 
|  | */ | 
|  | static void rtc_update_alarm(struct device *dev, struct rtc_time *alrm) | 
|  | { | 
|  | time64_t time; | 
|  | struct rtc_plat_data *pdata = dev_get_drvdata(dev); | 
|  | void __iomem *ioaddr = pdata->ioaddr; | 
|  |  | 
|  | time = rtc_tm_to_time64(alrm); | 
|  |  | 
|  | /* clear all the interrupt status bits */ | 
|  | writew(readw(ioaddr + RTC_RTCISR), ioaddr + RTC_RTCISR); | 
|  | set_alarm_or_time(dev, MXC_RTC_ALARM, time); | 
|  | } | 
|  |  | 
|  | static void mxc_rtc_irq_enable(struct device *dev, unsigned int bit, | 
|  | unsigned int enabled) | 
|  | { | 
|  | struct rtc_plat_data *pdata = dev_get_drvdata(dev); | 
|  | void __iomem *ioaddr = pdata->ioaddr; | 
|  | u32 reg; | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&pdata->rtc->irq_lock, flags); | 
|  | reg = readw(ioaddr + RTC_RTCIENR); | 
|  |  | 
|  | if (enabled) | 
|  | reg |= bit; | 
|  | else | 
|  | reg &= ~bit; | 
|  |  | 
|  | writew(reg, ioaddr + RTC_RTCIENR); | 
|  | spin_unlock_irqrestore(&pdata->rtc->irq_lock, flags); | 
|  | } | 
|  |  | 
|  | /* This function is the RTC interrupt service routine. */ | 
|  | static irqreturn_t mxc_rtc_interrupt(int irq, void *dev_id) | 
|  | { | 
|  | struct platform_device *pdev = dev_id; | 
|  | struct rtc_plat_data *pdata = platform_get_drvdata(pdev); | 
|  | void __iomem *ioaddr = pdata->ioaddr; | 
|  | u32 status; | 
|  | u32 events = 0; | 
|  |  | 
|  | spin_lock(&pdata->rtc->irq_lock); | 
|  | status = readw(ioaddr + RTC_RTCISR) & readw(ioaddr + RTC_RTCIENR); | 
|  | /* clear interrupt sources */ | 
|  | writew(status, ioaddr + RTC_RTCISR); | 
|  |  | 
|  | /* update irq data & counter */ | 
|  | if (status & RTC_ALM_BIT) { | 
|  | events |= (RTC_AF | RTC_IRQF); | 
|  | /* RTC alarm should be one-shot */ | 
|  | mxc_rtc_irq_enable(&pdev->dev, RTC_ALM_BIT, 0); | 
|  | } | 
|  |  | 
|  | if (status & PIT_ALL_ON) | 
|  | events |= (RTC_PF | RTC_IRQF); | 
|  |  | 
|  | rtc_update_irq(pdata->rtc, 1, events); | 
|  | spin_unlock(&pdata->rtc->irq_lock); | 
|  |  | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | static int mxc_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled) | 
|  | { | 
|  | mxc_rtc_irq_enable(dev, RTC_ALM_BIT, enabled); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This function reads the current RTC time into tm in Gregorian date. | 
|  | */ | 
|  | static int mxc_rtc_read_time(struct device *dev, struct rtc_time *tm) | 
|  | { | 
|  | time64_t val; | 
|  |  | 
|  | /* Avoid roll-over from reading the different registers */ | 
|  | do { | 
|  | val = get_alarm_or_time(dev, MXC_RTC_TIME); | 
|  | } while (val != get_alarm_or_time(dev, MXC_RTC_TIME)); | 
|  |  | 
|  | rtc_time64_to_tm(val, tm); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This function sets the internal RTC time based on tm in Gregorian date. | 
|  | */ | 
|  | static int mxc_rtc_set_time(struct device *dev, struct rtc_time *tm) | 
|  | { | 
|  | time64_t time = rtc_tm_to_time64(tm); | 
|  |  | 
|  | /* Avoid roll-over from reading the different registers */ | 
|  | do { | 
|  | set_alarm_or_time(dev, MXC_RTC_TIME, time); | 
|  | } while (time != get_alarm_or_time(dev, MXC_RTC_TIME)); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This function reads the current alarm value into the passed in 'alrm' | 
|  | * argument. It updates the alrm's pending field value based on the whether | 
|  | * an alarm interrupt occurs or not. | 
|  | */ | 
|  | static int mxc_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) | 
|  | { | 
|  | struct rtc_plat_data *pdata = dev_get_drvdata(dev); | 
|  | void __iomem *ioaddr = pdata->ioaddr; | 
|  |  | 
|  | rtc_time64_to_tm(get_alarm_or_time(dev, MXC_RTC_ALARM), &alrm->time); | 
|  | alrm->pending = ((readw(ioaddr + RTC_RTCISR) & RTC_ALM_BIT)) ? 1 : 0; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This function sets the RTC alarm based on passed in alrm. | 
|  | */ | 
|  | static int mxc_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) | 
|  | { | 
|  | struct rtc_plat_data *pdata = dev_get_drvdata(dev); | 
|  |  | 
|  | rtc_update_alarm(dev, &alrm->time); | 
|  |  | 
|  | memcpy(&pdata->g_rtc_alarm, &alrm->time, sizeof(struct rtc_time)); | 
|  | mxc_rtc_irq_enable(dev, RTC_ALM_BIT, alrm->enabled); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* RTC layer */ | 
|  | static const struct rtc_class_ops mxc_rtc_ops = { | 
|  | .read_time		= mxc_rtc_read_time, | 
|  | .set_time		= mxc_rtc_set_time, | 
|  | .read_alarm		= mxc_rtc_read_alarm, | 
|  | .set_alarm		= mxc_rtc_set_alarm, | 
|  | .alarm_irq_enable	= mxc_rtc_alarm_irq_enable, | 
|  | }; | 
|  |  | 
|  | static int mxc_rtc_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct rtc_device *rtc; | 
|  | struct rtc_plat_data *pdata = NULL; | 
|  | u32 reg; | 
|  | unsigned long rate; | 
|  | int ret; | 
|  |  | 
|  | pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); | 
|  | if (!pdata) | 
|  | return -ENOMEM; | 
|  |  | 
|  | pdata->devtype = (uintptr_t)of_device_get_match_data(&pdev->dev); | 
|  |  | 
|  | pdata->ioaddr = devm_platform_ioremap_resource(pdev, 0); | 
|  | if (IS_ERR(pdata->ioaddr)) | 
|  | return PTR_ERR(pdata->ioaddr); | 
|  |  | 
|  | rtc = devm_rtc_allocate_device(&pdev->dev); | 
|  | if (IS_ERR(rtc)) | 
|  | return PTR_ERR(rtc); | 
|  |  | 
|  | pdata->rtc = rtc; | 
|  | rtc->ops = &mxc_rtc_ops; | 
|  | if (is_imx1_rtc(pdata)) { | 
|  | struct rtc_time tm; | 
|  |  | 
|  | /* 9bit days + hours minutes seconds */ | 
|  | rtc->range_max = (1 << 9) * 86400 - 1; | 
|  |  | 
|  | /* | 
|  | * Set the start date as beginning of the current year. This can | 
|  | * be overridden using device tree. | 
|  | */ | 
|  | rtc_time64_to_tm(ktime_get_real_seconds(), &tm); | 
|  | rtc->start_secs =  mktime64(tm.tm_year, 1, 1, 0, 0, 0); | 
|  | rtc->set_start_time = true; | 
|  | } else { | 
|  | /* 16bit days + hours minutes seconds */ | 
|  | rtc->range_max = (1 << 16) * 86400ULL - 1; | 
|  | } | 
|  |  | 
|  | pdata->clk_ipg = devm_clk_get_enabled(&pdev->dev, "ipg"); | 
|  | if (IS_ERR(pdata->clk_ipg)) { | 
|  | dev_err(&pdev->dev, "unable to get ipg clock!\n"); | 
|  | return PTR_ERR(pdata->clk_ipg); | 
|  | } | 
|  |  | 
|  | pdata->clk_ref = devm_clk_get_enabled(&pdev->dev, "ref"); | 
|  | if (IS_ERR(pdata->clk_ref)) { | 
|  | dev_err(&pdev->dev, "unable to get ref clock!\n"); | 
|  | return PTR_ERR(pdata->clk_ref); | 
|  | } | 
|  |  | 
|  | rate = clk_get_rate(pdata->clk_ref); | 
|  |  | 
|  | if (rate == 32768) | 
|  | reg = RTC_INPUT_CLK_32768HZ; | 
|  | else if (rate == 32000) | 
|  | reg = RTC_INPUT_CLK_32000HZ; | 
|  | else if (rate == 38400) | 
|  | reg = RTC_INPUT_CLK_38400HZ; | 
|  | else { | 
|  | dev_err(&pdev->dev, "rtc clock is not valid (%lu)\n", rate); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | reg |= RTC_ENABLE_BIT; | 
|  | writew(reg, (pdata->ioaddr + RTC_RTCCTL)); | 
|  | if (((readw(pdata->ioaddr + RTC_RTCCTL)) & RTC_ENABLE_BIT) == 0) { | 
|  | dev_err(&pdev->dev, "hardware module can't be enabled!\n"); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | platform_set_drvdata(pdev, pdata); | 
|  |  | 
|  | /* Configure and enable the RTC */ | 
|  | pdata->irq = platform_get_irq(pdev, 0); | 
|  |  | 
|  | if (pdata->irq >= 0 && | 
|  | devm_request_irq(&pdev->dev, pdata->irq, mxc_rtc_interrupt, | 
|  | IRQF_SHARED, pdev->name, pdev) < 0) { | 
|  | dev_warn(&pdev->dev, "interrupt not available.\n"); | 
|  | pdata->irq = -1; | 
|  | } | 
|  |  | 
|  | if (pdata->irq >= 0) { | 
|  | device_init_wakeup(&pdev->dev, true); | 
|  | ret = dev_pm_set_wake_irq(&pdev->dev, pdata->irq); | 
|  | if (ret) | 
|  | dev_err(&pdev->dev, "failed to enable irq wake\n"); | 
|  | } | 
|  |  | 
|  | ret = devm_rtc_register_device(rtc); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static struct platform_driver mxc_rtc_driver = { | 
|  | .driver = { | 
|  | .name	= "mxc_rtc", | 
|  | .of_match_table = imx_rtc_dt_ids, | 
|  | }, | 
|  | .probe = mxc_rtc_probe, | 
|  | }; | 
|  |  | 
|  | module_platform_driver(mxc_rtc_driver) | 
|  |  | 
|  | MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>"); | 
|  | MODULE_DESCRIPTION("RTC driver for Freescale MXC"); | 
|  | MODULE_LICENSE("GPL"); | 
|  |  |