| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (c) 2023 Intel Corporation. |
| */ |
| |
| #include <linux/unaligned.h> |
| |
| #include <linux/acpi.h> |
| #include <linux/bitfield.h> |
| #include <linux/clk.h> |
| #include <linux/delay.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/i2c.h> |
| #include <linux/module.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/regmap.h> |
| #include <linux/regulator/consumer.h> |
| |
| #include <media/v4l2-cci.h> |
| #include <media/v4l2-ctrls.h> |
| #include <media/v4l2-device.h> |
| #include <media/v4l2-fwnode.h> |
| |
| #define OV01A10_LINK_FREQ_400MHZ 400000000ULL |
| #define OV01A10_SCLK 80000000LL |
| #define OV01A10_DATA_LANES 1 |
| #define OV01A10_MCLK 19200000 |
| |
| #define OV01A10_REG_CHIP_ID CCI_REG24(0x300a) |
| #define OV01A10_CHIP_ID 0x560141 |
| |
| #define OV01A10_REG_MODE_SELECT CCI_REG8(0x0100) |
| #define OV01A10_MODE_STANDBY 0x00 |
| #define OV01A10_MODE_STREAMING 0x01 |
| |
| /* pixel array */ |
| #define OV01A10_NATIVE_WIDTH 1296 |
| #define OV01A10_NATIVE_HEIGHT 816 |
| #define OV01A10_DEFAULT_WIDTH 1280 |
| #define OV01A10_DEFAULT_HEIGHT 800 |
| |
| /* vertical and horizontal timings */ |
| #define OV01A10_VTS_DEF 0x0700 |
| #define OV01A10_VTS_MIN 0x0380 |
| #define OV01A10_VTS_MAX 0xffff |
| #define OV01A10_HTS_DEF 1488 |
| |
| /* exposure controls */ |
| #define OV01A10_REG_EXPOSURE CCI_REG16(0x3501) |
| #define OV01A10_EXPOSURE_MIN 4 |
| #define OV01A10_EXPOSURE_MAX_MARGIN 8 |
| #define OV01A10_EXPOSURE_STEP 1 |
| |
| /* analog gain controls */ |
| #define OV01A10_REG_ANALOG_GAIN CCI_REG16(0x3508) |
| #define OV01A10_ANAL_GAIN_MIN 0x100 |
| #define OV01A10_ANAL_GAIN_MAX 0x3fff |
| #define OV01A10_ANAL_GAIN_STEP 1 |
| |
| /* digital gain controls */ |
| #define OV01A10_REG_DIGITAL_GAIN_B CCI_REG24(0x350a) |
| #define OV01A10_REG_DIGITAL_GAIN_GB CCI_REG24(0x3510) |
| #define OV01A10_REG_DIGITAL_GAIN_GR CCI_REG24(0x3513) |
| #define OV01A10_REG_DIGITAL_GAIN_R CCI_REG24(0x3516) |
| #define OV01A10_DGTL_GAIN_MIN 0 |
| #define OV01A10_DGTL_GAIN_MAX 0x3fff |
| #define OV01A10_DGTL_GAIN_STEP 1 |
| #define OV01A10_DGTL_GAIN_DEFAULT 1024 |
| |
| /* timing control */ |
| #define OV01A10_REG_X_ADDR_START CCI_REG16(0x3800) |
| #define OV01A10_REG_Y_ADDR_START CCI_REG16(0x3802) |
| #define OV01A10_REG_X_ADDR_END CCI_REG16(0x3804) |
| #define OV01A10_REG_Y_ADDR_END CCI_REG16(0x3806) |
| #define OV01A10_REG_X_OUTPUT_SIZE CCI_REG16(0x3808) |
| #define OV01A10_REG_Y_OUTPUT_SIZE CCI_REG16(0x380a) |
| #define OV01A10_REG_HTS CCI_REG16(0x380c) /* in units of 2 pixels */ |
| #define OV01A10_REG_VTS CCI_REG16(0x380e) |
| #define OV01A10_REG_X_WIN CCI_REG16(0x3810) |
| #define OV01A10_REG_Y_WIN CCI_REG16(0x3812) |
| |
| /* flip and mirror control */ |
| #define OV01A10_REG_FORMAT1 CCI_REG8(0x3820) |
| #define OV01A10_VFLIP_MASK BIT(4) |
| #define OV01A10_HFLIP_MASK BIT(3) |
| |
| /* test pattern control */ |
| #define OV01A10_REG_TEST_PATTERN CCI_REG8(0x4503) |
| #define OV01A10_TEST_PATTERN_ENABLE BIT(7) |
| |
| struct ov01a10_link_freq_config { |
| const struct reg_sequence *regs; |
| int regs_len; |
| }; |
| |
| static const struct reg_sequence mipi_data_rate_720mbps[] = { |
| {0x0103, 0x01}, |
| {0x0302, 0x00}, |
| {0x0303, 0x06}, |
| {0x0304, 0x01}, |
| {0x0305, 0xf4}, |
| {0x0306, 0x00}, |
| {0x0308, 0x01}, |
| {0x0309, 0x00}, |
| {0x030c, 0x01}, |
| {0x0322, 0x01}, |
| {0x0323, 0x06}, |
| {0x0324, 0x01}, |
| {0x0325, 0x68}, |
| }; |
| |
| static const struct reg_sequence ov01a10_global_setting[] = { |
| {0x3002, 0xa1}, |
| {0x301e, 0xf0}, |
| {0x3022, 0x01}, |
| {0x3504, 0x0c}, |
| {0x3601, 0xc0}, |
| {0x3603, 0x71}, |
| {0x3610, 0x68}, |
| {0x3611, 0x86}, |
| {0x3640, 0x10}, |
| {0x3641, 0x80}, |
| {0x3642, 0xdc}, |
| {0x3646, 0x55}, |
| {0x3647, 0x57}, |
| {0x364b, 0x00}, |
| {0x3653, 0x10}, |
| {0x3655, 0x00}, |
| {0x3656, 0x00}, |
| {0x365f, 0x0f}, |
| {0x3661, 0x45}, |
| {0x3662, 0x24}, |
| {0x3663, 0x11}, |
| {0x3664, 0x07}, |
| {0x3709, 0x34}, |
| {0x370b, 0x6f}, |
| {0x3714, 0x22}, |
| {0x371b, 0x27}, |
| {0x371c, 0x67}, |
| {0x371d, 0xa7}, |
| {0x371e, 0xe7}, |
| {0x3730, 0x81}, |
| {0x3733, 0x10}, |
| {0x3734, 0x40}, |
| {0x3737, 0x04}, |
| {0x3739, 0x1c}, |
| {0x3767, 0x00}, |
| {0x376c, 0x81}, |
| {0x3772, 0x14}, |
| {0x37c2, 0x04}, |
| {0x37d8, 0x03}, |
| {0x37d9, 0x0c}, |
| {0x37e0, 0x00}, |
| {0x37e1, 0x08}, |
| {0x37e2, 0x10}, |
| {0x37e3, 0x04}, |
| {0x37e4, 0x04}, |
| {0x37e5, 0x03}, |
| {0x37e6, 0x04}, |
| {0x3814, 0x01}, |
| {0x3815, 0x01}, |
| {0x3816, 0x01}, |
| {0x3817, 0x01}, |
| {0x3822, 0x13}, |
| {0x3832, 0x28}, |
| {0x3833, 0x10}, |
| {0x3b00, 0x00}, |
| {0x3c80, 0x00}, |
| {0x3c88, 0x02}, |
| {0x3c8c, 0x07}, |
| {0x3c8d, 0x40}, |
| {0x3cc7, 0x80}, |
| {0x4000, 0xc3}, |
| {0x4001, 0xe0}, |
| {0x4003, 0x40}, |
| {0x4008, 0x02}, |
| {0x4009, 0x19}, |
| {0x400a, 0x01}, |
| {0x400b, 0x6c}, |
| {0x4011, 0x00}, |
| {0x4041, 0x00}, |
| {0x4300, 0xff}, |
| {0x4301, 0x00}, |
| {0x4302, 0x0f}, |
| {0x4601, 0x50}, |
| {0x4800, 0x64}, |
| {0x481f, 0x34}, |
| {0x4825, 0x33}, |
| {0x4837, 0x11}, |
| {0x4881, 0x40}, |
| {0x4883, 0x01}, |
| {0x4890, 0x00}, |
| {0x4901, 0x00}, |
| {0x4902, 0x00}, |
| {0x4b00, 0x2a}, |
| {0x4b0d, 0x00}, |
| {0x450a, 0x04}, |
| {0x450b, 0x00}, |
| {0x5000, 0x65}, |
| {0x5200, 0x18}, |
| {0x5004, 0x00}, |
| {0x5080, 0x40}, |
| {0x0325, 0xc2}, |
| }; |
| |
| static const char * const ov01a10_test_pattern_menu[] = { |
| "Disabled", |
| "Color Bar", |
| "Left-Right Darker Color Bar", |
| "Bottom-Top Darker Color Bar", |
| }; |
| |
| static const s64 link_freq_menu_items[] = { |
| OV01A10_LINK_FREQ_400MHZ, |
| }; |
| |
| static const struct ov01a10_link_freq_config link_freq_configs[] = { |
| { |
| .regs = mipi_data_rate_720mbps, |
| .regs_len = ARRAY_SIZE(mipi_data_rate_720mbps), |
| }, |
| }; |
| |
| static const struct v4l2_rect ov01a10_default_crop = { |
| .left = (OV01A10_NATIVE_WIDTH - OV01A10_DEFAULT_WIDTH) / 2, |
| .top = (OV01A10_NATIVE_HEIGHT - OV01A10_DEFAULT_HEIGHT) / 2, |
| .width = OV01A10_DEFAULT_WIDTH, |
| .height = OV01A10_DEFAULT_HEIGHT, |
| }; |
| |
| static const char * const ov01a10_supply_names[] = { |
| "dovdd", /* Digital I/O power */ |
| "avdd", /* Analog power */ |
| "dvdd", /* Digital core power */ |
| }; |
| |
| struct ov01a10_sensor_cfg { |
| const char *model; |
| u32 bus_fmt; |
| int pattern_size; |
| int border_size; |
| u8 format1_base_val; |
| bool invert_hflip_shift; |
| bool invert_vflip_shift; |
| }; |
| |
| struct ov01a10 { |
| struct device *dev; |
| struct regmap *regmap; |
| const struct ov01a10_sensor_cfg *cfg; |
| struct v4l2_subdev sd; |
| struct media_pad pad; |
| struct v4l2_ctrl_handler ctrl_handler; |
| |
| /* v4l2 controls */ |
| struct v4l2_ctrl *link_freq; |
| struct v4l2_ctrl *pixel_rate; |
| struct v4l2_ctrl *vblank; |
| struct v4l2_ctrl *hblank; |
| struct v4l2_ctrl *exposure; |
| struct v4l2_ctrl *hflip; |
| struct v4l2_ctrl *vflip; |
| |
| u32 link_freq_index; |
| |
| struct clk *clk; |
| struct gpio_desc *reset; |
| struct gpio_desc *powerdown; |
| struct regulator_bulk_data supplies[ARRAY_SIZE(ov01a10_supply_names)]; |
| }; |
| |
| static inline struct ov01a10 *to_ov01a10(struct v4l2_subdev *subdev) |
| { |
| return container_of(subdev, struct ov01a10, sd); |
| } |
| |
| static struct v4l2_mbus_framefmt *ov01a10_get_active_format(struct ov01a10 *ov01a10) |
| { |
| struct v4l2_subdev_state *active_state = |
| v4l2_subdev_get_locked_active_state(&ov01a10->sd); |
| |
| return v4l2_subdev_state_get_format(active_state, 0); |
| } |
| |
| static struct v4l2_rect *ov01a10_get_active_crop(struct ov01a10 *ov01a10) |
| { |
| struct v4l2_subdev_state *active_state = |
| v4l2_subdev_get_locked_active_state(&ov01a10->sd); |
| |
| return v4l2_subdev_state_get_crop(active_state, 0); |
| } |
| |
| static int ov01a10_update_digital_gain(struct ov01a10 *ov01a10, u32 d_gain) |
| { |
| u32 real = d_gain << 6; |
| int ret = 0; |
| |
| cci_write(ov01a10->regmap, OV01A10_REG_DIGITAL_GAIN_B, real, &ret); |
| cci_write(ov01a10->regmap, OV01A10_REG_DIGITAL_GAIN_GB, real, &ret); |
| cci_write(ov01a10->regmap, OV01A10_REG_DIGITAL_GAIN_GR, real, &ret); |
| cci_write(ov01a10->regmap, OV01A10_REG_DIGITAL_GAIN_R, real, &ret); |
| |
| return ret; |
| } |
| |
| static int ov01a10_test_pattern(struct ov01a10 *ov01a10, u32 pattern) |
| { |
| if (pattern) |
| pattern |= OV01A10_TEST_PATTERN_ENABLE; |
| |
| return cci_write(ov01a10->regmap, OV01A10_REG_TEST_PATTERN, pattern, |
| NULL); |
| } |
| |
| static void ov01a10_set_format1(struct ov01a10 *ov01a10, int *ret) |
| { |
| u8 val = ov01a10->cfg->format1_base_val; |
| |
| /* hflip register bit is inverted */ |
| if (!ov01a10->hflip->val) |
| val |= FIELD_PREP(OV01A10_HFLIP_MASK, 0x1); |
| |
| if (ov01a10->vflip->val) |
| val |= FIELD_PREP(OV01A10_VFLIP_MASK, 0x1); |
| |
| cci_write(ov01a10->regmap, OV01A10_REG_FORMAT1, val, ret); |
| } |
| |
| static int ov01a10_set_hflip(struct ov01a10 *ov01a10, bool hflip) |
| { |
| struct v4l2_rect *crop = ov01a10_get_active_crop(ov01a10); |
| const struct ov01a10_sensor_cfg *cfg = ov01a10->cfg; |
| u32 offset; |
| int ret = 0; |
| |
| offset = crop->left; |
| if ((hflip ^ cfg->invert_hflip_shift) && cfg->border_size) |
| offset++; |
| |
| cci_write(ov01a10->regmap, OV01A10_REG_X_WIN, offset, &ret); |
| ov01a10_set_format1(ov01a10, &ret); |
| |
| return ret; |
| } |
| |
| static int ov01a10_set_vflip(struct ov01a10 *ov01a10, bool vflip) |
| { |
| struct v4l2_rect *crop = ov01a10_get_active_crop(ov01a10); |
| const struct ov01a10_sensor_cfg *cfg = ov01a10->cfg; |
| u32 offset; |
| int ret = 0; |
| |
| offset = crop->top; |
| if ((vflip ^ cfg->invert_vflip_shift) && cfg->border_size) |
| offset++; |
| |
| cci_write(ov01a10->regmap, OV01A10_REG_Y_WIN, offset, &ret); |
| ov01a10_set_format1(ov01a10, &ret); |
| |
| return ret; |
| } |
| |
| static int ov01a10_set_ctrl(struct v4l2_ctrl *ctrl) |
| { |
| struct ov01a10 *ov01a10 = container_of(ctrl->handler, |
| struct ov01a10, ctrl_handler); |
| struct v4l2_mbus_framefmt *fmt = ov01a10_get_active_format(ov01a10); |
| s64 exposure_max; |
| int ret = 0; |
| |
| if (ctrl->id == V4L2_CID_VBLANK) { |
| exposure_max = fmt->height + ctrl->val - |
| OV01A10_EXPOSURE_MAX_MARGIN; |
| __v4l2_ctrl_modify_range(ov01a10->exposure, |
| OV01A10_EXPOSURE_MIN, exposure_max, |
| OV01A10_EXPOSURE_STEP, exposure_max); |
| } |
| |
| if (!pm_runtime_get_if_in_use(ov01a10->dev)) |
| return 0; |
| |
| switch (ctrl->id) { |
| case V4L2_CID_ANALOGUE_GAIN: |
| ret = cci_write(ov01a10->regmap, OV01A10_REG_ANALOG_GAIN, |
| ctrl->val, NULL); |
| break; |
| |
| case V4L2_CID_DIGITAL_GAIN: |
| ret = ov01a10_update_digital_gain(ov01a10, ctrl->val); |
| break; |
| |
| case V4L2_CID_EXPOSURE: |
| ret = cci_write(ov01a10->regmap, OV01A10_REG_EXPOSURE, |
| ctrl->val, NULL); |
| break; |
| |
| case V4L2_CID_VBLANK: |
| ret = cci_write(ov01a10->regmap, OV01A10_REG_VTS, |
| fmt->height + ctrl->val, NULL); |
| break; |
| |
| case V4L2_CID_TEST_PATTERN: |
| ret = ov01a10_test_pattern(ov01a10, ctrl->val); |
| break; |
| |
| case V4L2_CID_HFLIP: |
| ov01a10_set_hflip(ov01a10, ctrl->val); |
| break; |
| |
| case V4L2_CID_VFLIP: |
| ov01a10_set_vflip(ov01a10, ctrl->val); |
| break; |
| |
| default: |
| ret = -EINVAL; |
| break; |
| } |
| |
| pm_runtime_put(ov01a10->dev); |
| |
| return ret; |
| } |
| |
| static const struct v4l2_ctrl_ops ov01a10_ctrl_ops = { |
| .s_ctrl = ov01a10_set_ctrl, |
| }; |
| |
| static int ov01a10_init_controls(struct ov01a10 *ov01a10) |
| { |
| struct v4l2_fwnode_device_properties props; |
| u32 vblank_min, vblank_max, vblank_default; |
| struct v4l2_ctrl_handler *ctrl_hdlr; |
| s64 exposure_max, h_blank; |
| int ret = 0; |
| |
| ret = v4l2_fwnode_device_parse(ov01a10->dev, &props); |
| if (ret) |
| return ret; |
| |
| ctrl_hdlr = &ov01a10->ctrl_handler; |
| ret = v4l2_ctrl_handler_init(ctrl_hdlr, 12); |
| if (ret) |
| return ret; |
| |
| ov01a10->link_freq = v4l2_ctrl_new_int_menu(ctrl_hdlr, |
| &ov01a10_ctrl_ops, |
| V4L2_CID_LINK_FREQ, |
| ov01a10->link_freq_index, 0, |
| link_freq_menu_items); |
| |
| ov01a10->pixel_rate = v4l2_ctrl_new_std(ctrl_hdlr, &ov01a10_ctrl_ops, |
| V4L2_CID_PIXEL_RATE, 0, |
| OV01A10_SCLK, 1, OV01A10_SCLK); |
| |
| vblank_min = OV01A10_VTS_MIN - OV01A10_DEFAULT_HEIGHT; |
| vblank_max = OV01A10_VTS_MAX - OV01A10_DEFAULT_HEIGHT; |
| vblank_default = OV01A10_VTS_DEF - OV01A10_DEFAULT_HEIGHT; |
| ov01a10->vblank = v4l2_ctrl_new_std(ctrl_hdlr, &ov01a10_ctrl_ops, |
| V4L2_CID_VBLANK, vblank_min, |
| vblank_max, 1, vblank_default); |
| |
| h_blank = OV01A10_HTS_DEF - OV01A10_DEFAULT_WIDTH; |
| ov01a10->hblank = v4l2_ctrl_new_std(ctrl_hdlr, &ov01a10_ctrl_ops, |
| V4L2_CID_HBLANK, h_blank, h_blank, |
| 1, h_blank); |
| |
| v4l2_ctrl_new_std(ctrl_hdlr, &ov01a10_ctrl_ops, V4L2_CID_ANALOGUE_GAIN, |
| OV01A10_ANAL_GAIN_MIN, OV01A10_ANAL_GAIN_MAX, |
| OV01A10_ANAL_GAIN_STEP, OV01A10_ANAL_GAIN_MIN); |
| v4l2_ctrl_new_std(ctrl_hdlr, &ov01a10_ctrl_ops, V4L2_CID_DIGITAL_GAIN, |
| OV01A10_DGTL_GAIN_MIN, OV01A10_DGTL_GAIN_MAX, |
| OV01A10_DGTL_GAIN_STEP, OV01A10_DGTL_GAIN_DEFAULT); |
| |
| exposure_max = OV01A10_VTS_DEF - OV01A10_EXPOSURE_MAX_MARGIN; |
| ov01a10->exposure = v4l2_ctrl_new_std(ctrl_hdlr, &ov01a10_ctrl_ops, |
| V4L2_CID_EXPOSURE, |
| OV01A10_EXPOSURE_MIN, |
| exposure_max, |
| OV01A10_EXPOSURE_STEP, |
| exposure_max); |
| |
| v4l2_ctrl_new_std_menu_items(ctrl_hdlr, &ov01a10_ctrl_ops, |
| V4L2_CID_TEST_PATTERN, |
| ARRAY_SIZE(ov01a10_test_pattern_menu) - 1, |
| 0, 0, ov01a10_test_pattern_menu); |
| |
| ov01a10->hflip = v4l2_ctrl_new_std(ctrl_hdlr, &ov01a10_ctrl_ops, |
| V4L2_CID_HFLIP, 0, 1, 1, 0); |
| ov01a10->vflip = v4l2_ctrl_new_std(ctrl_hdlr, &ov01a10_ctrl_ops, |
| V4L2_CID_VFLIP, 0, 1, 1, 0); |
| |
| ret = v4l2_ctrl_new_fwnode_properties(ctrl_hdlr, &ov01a10_ctrl_ops, |
| &props); |
| if (ret) |
| goto fail; |
| |
| if (ctrl_hdlr->error) { |
| ret = ctrl_hdlr->error; |
| goto fail; |
| } |
| |
| ov01a10->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY; |
| ov01a10->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY; |
| |
| ov01a10->sd.ctrl_handler = ctrl_hdlr; |
| |
| return 0; |
| fail: |
| v4l2_ctrl_handler_free(ctrl_hdlr); |
| |
| return ret; |
| } |
| |
| static void ov01a10_fill_format(struct ov01a10 *ov01a10, |
| struct v4l2_mbus_framefmt *fmt, |
| unsigned int width, unsigned int height) |
| { |
| memset(fmt, 0, sizeof(*fmt)); |
| fmt->width = width; |
| fmt->height = height; |
| fmt->code = ov01a10->cfg->bus_fmt; |
| fmt->field = V4L2_FIELD_NONE; |
| fmt->colorspace = V4L2_COLORSPACE_RAW; |
| } |
| |
| static int ov01a10_set_mode(struct ov01a10 *ov01a10) |
| { |
| struct v4l2_mbus_framefmt *fmt = ov01a10_get_active_format(ov01a10); |
| int ret = 0; |
| |
| cci_write(ov01a10->regmap, OV01A10_REG_X_ADDR_START, 0, &ret); |
| cci_write(ov01a10->regmap, OV01A10_REG_Y_ADDR_START, 0, &ret); |
| cci_write(ov01a10->regmap, OV01A10_REG_X_ADDR_END, |
| OV01A10_NATIVE_WIDTH - 1, &ret); |
| cci_write(ov01a10->regmap, OV01A10_REG_Y_ADDR_END, |
| OV01A10_NATIVE_HEIGHT - 1, &ret); |
| cci_write(ov01a10->regmap, OV01A10_REG_X_OUTPUT_SIZE, |
| fmt->width, &ret); |
| cci_write(ov01a10->regmap, OV01A10_REG_Y_OUTPUT_SIZE, |
| fmt->height, &ret); |
| /* HTS register is in units of 2 pixels */ |
| cci_write(ov01a10->regmap, OV01A10_REG_HTS, |
| OV01A10_HTS_DEF / 2, &ret); |
| /* OV01A10_REG_VTS is set by vblank control */ |
| /* OV01A10_REG_X_WIN is set by hlip control */ |
| /* OV01A10_REG_Y_WIN is set by vflip control */ |
| |
| return ret; |
| } |
| |
| static int ov01a10_start_streaming(struct ov01a10 *ov01a10) |
| { |
| const struct ov01a10_link_freq_config *freq_cfg; |
| int ret; |
| |
| freq_cfg = &link_freq_configs[ov01a10->link_freq_index]; |
| ret = regmap_multi_reg_write(ov01a10->regmap, freq_cfg->regs, |
| freq_cfg->regs_len); |
| if (ret) { |
| dev_err(ov01a10->dev, "failed to set plls\n"); |
| return ret; |
| } |
| |
| ret = regmap_multi_reg_write(ov01a10->regmap, ov01a10_global_setting, |
| ARRAY_SIZE(ov01a10_global_setting)); |
| if (ret) { |
| dev_err(ov01a10->dev, "failed to initialize sensor\n"); |
| return ret; |
| } |
| |
| ret = ov01a10_set_mode(ov01a10); |
| if (ret) { |
| dev_err(ov01a10->dev, "failed to set mode\n"); |
| return ret; |
| } |
| |
| ret = __v4l2_ctrl_handler_setup(ov01a10->sd.ctrl_handler); |
| if (ret) |
| return ret; |
| |
| return cci_write(ov01a10->regmap, OV01A10_REG_MODE_SELECT, |
| OV01A10_MODE_STREAMING, NULL); |
| } |
| |
| static void ov01a10_stop_streaming(struct ov01a10 *ov01a10) |
| { |
| cci_write(ov01a10->regmap, OV01A10_REG_MODE_SELECT, |
| OV01A10_MODE_STANDBY, NULL); |
| } |
| |
| static int ov01a10_set_stream(struct v4l2_subdev *sd, int enable) |
| { |
| struct ov01a10 *ov01a10 = to_ov01a10(sd); |
| struct v4l2_subdev_state *state; |
| int ret = 0; |
| |
| state = v4l2_subdev_lock_and_get_active_state(sd); |
| |
| if (enable) { |
| ret = pm_runtime_resume_and_get(ov01a10->dev); |
| if (ret < 0) |
| goto unlock; |
| |
| ret = ov01a10_start_streaming(ov01a10); |
| if (ret) { |
| pm_runtime_put(ov01a10->dev); |
| goto unlock; |
| } |
| } else { |
| ov01a10_stop_streaming(ov01a10); |
| pm_runtime_put(ov01a10->dev); |
| } |
| |
| unlock: |
| v4l2_subdev_unlock_state(state); |
| |
| return ret; |
| } |
| |
| static void ov01a10_update_blank_ctrls(struct ov01a10 *ov01a10, |
| unsigned int width, unsigned int height) |
| { |
| s32 hblank, vblank_def; |
| |
| vblank_def = OV01A10_VTS_DEF - height; |
| __v4l2_ctrl_modify_range(ov01a10->vblank, |
| OV01A10_VTS_MIN - height, |
| OV01A10_VTS_MAX - height, 1, |
| vblank_def); |
| __v4l2_ctrl_s_ctrl(ov01a10->vblank, vblank_def); |
| |
| hblank = OV01A10_HTS_DEF - width; |
| __v4l2_ctrl_modify_range(ov01a10->hblank, hblank, hblank, 1, hblank); |
| } |
| |
| static int ov01a10_set_format(struct v4l2_subdev *sd, |
| struct v4l2_subdev_state *sd_state, |
| struct v4l2_subdev_format *fmt) |
| { |
| struct v4l2_rect *crop = v4l2_subdev_state_get_crop(sd_state, fmt->pad); |
| struct ov01a10 *ov01a10 = to_ov01a10(sd); |
| const int pattern_size = ov01a10->cfg->pattern_size; |
| const int border_size = ov01a10->cfg->border_size; |
| unsigned int width, height; |
| |
| width = clamp_val(ALIGN(fmt->format.width, pattern_size), |
| pattern_size, |
| OV01A10_NATIVE_WIDTH - 2 * border_size); |
| height = clamp_val(ALIGN(fmt->format.height, pattern_size), |
| pattern_size, |
| OV01A10_NATIVE_HEIGHT - 2 * border_size); |
| |
| /* Center image for userspace which does not set the crop first */ |
| if (width != crop->width || height != crop->height) { |
| crop->left = ALIGN((OV01A10_NATIVE_WIDTH - width) / 2, |
| pattern_size); |
| crop->top = ALIGN((OV01A10_NATIVE_HEIGHT - height) / 2, |
| pattern_size); |
| crop->width = width; |
| crop->height = height; |
| } |
| |
| ov01a10_fill_format(ov01a10, &fmt->format, width, height); |
| *v4l2_subdev_state_get_format(sd_state, fmt->pad) = fmt->format; |
| |
| if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) |
| ov01a10_update_blank_ctrls(ov01a10, width, height); |
| |
| return 0; |
| } |
| |
| static int ov01a10_init_state(struct v4l2_subdev *sd, |
| struct v4l2_subdev_state *sd_state) |
| { |
| struct ov01a10 *ov01a10 = to_ov01a10(sd); |
| |
| *v4l2_subdev_state_get_crop(sd_state, 0) = ov01a10_default_crop; |
| ov01a10_fill_format(ov01a10, v4l2_subdev_state_get_format(sd_state, 0), |
| OV01A10_DEFAULT_WIDTH, OV01A10_DEFAULT_HEIGHT); |
| |
| return 0; |
| } |
| |
| static int ov01a10_enum_mbus_code(struct v4l2_subdev *sd, |
| struct v4l2_subdev_state *sd_state, |
| struct v4l2_subdev_mbus_code_enum *code) |
| { |
| struct ov01a10 *ov01a10 = to_ov01a10(sd); |
| |
| if (code->index > 0) |
| return -EINVAL; |
| |
| code->code = ov01a10->cfg->bus_fmt; |
| |
| return 0; |
| } |
| |
| static int ov01a10_enum_frame_size(struct v4l2_subdev *sd, |
| struct v4l2_subdev_state *sd_state, |
| struct v4l2_subdev_frame_size_enum *fse) |
| { |
| struct ov01a10 *ov01a10 = to_ov01a10(sd); |
| const int pattern_size = ov01a10->cfg->pattern_size; |
| const int border_size = ov01a10->cfg->border_size; |
| |
| if (fse->index) |
| return -EINVAL; |
| |
| fse->min_width = pattern_size; |
| fse->max_width = OV01A10_NATIVE_WIDTH - 2 * border_size; |
| fse->min_height = pattern_size; |
| fse->max_height = OV01A10_NATIVE_HEIGHT - 2 * border_size; |
| |
| return 0; |
| } |
| |
| static int ov01a10_get_selection(struct v4l2_subdev *sd, |
| struct v4l2_subdev_state *state, |
| struct v4l2_subdev_selection *sel) |
| { |
| struct ov01a10 *ov01a10 = to_ov01a10(sd); |
| const int border_size = ov01a10->cfg->border_size; |
| |
| switch (sel->target) { |
| case V4L2_SEL_TGT_CROP: |
| sel->r = *v4l2_subdev_state_get_crop(state, sel->pad); |
| return 0; |
| case V4L2_SEL_TGT_CROP_DEFAULT: |
| sel->r = ov01a10_default_crop; |
| return 0; |
| case V4L2_SEL_TGT_CROP_BOUNDS: |
| /* Keep a border for hvflip shift to preserve bayer-pattern */ |
| sel->r.left = border_size; |
| sel->r.top = border_size; |
| sel->r.width = OV01A10_NATIVE_WIDTH - 2 * border_size; |
| sel->r.height = OV01A10_NATIVE_HEIGHT - 2 * border_size; |
| return 0; |
| case V4L2_SEL_TGT_NATIVE_SIZE: |
| sel->r.left = 0; |
| sel->r.top = 0; |
| sel->r.width = OV01A10_NATIVE_WIDTH; |
| sel->r.height = OV01A10_NATIVE_HEIGHT; |
| return 0; |
| } |
| |
| return -EINVAL; |
| } |
| |
| static int ov01a10_set_selection(struct v4l2_subdev *sd, |
| struct v4l2_subdev_state *sd_state, |
| struct v4l2_subdev_selection *sel) |
| { |
| struct ov01a10 *ov01a10 = to_ov01a10(sd); |
| const int pattern_size = ov01a10->cfg->pattern_size; |
| const int border_size = ov01a10->cfg->border_size; |
| struct v4l2_mbus_framefmt *format; |
| struct v4l2_rect *crop; |
| struct v4l2_rect rect; |
| |
| if (sel->target != V4L2_SEL_TGT_CROP) |
| return -EINVAL; |
| |
| /* |
| * Clamp the boundaries of the crop rectangle to the size of the sensor |
| * pixel array. Align to pattern-size to ensure pattern isn't disrupted. |
| */ |
| rect.left = clamp_val(ALIGN(sel->r.left, pattern_size), border_size, |
| OV01A10_NATIVE_WIDTH - 2 * border_size); |
| rect.top = clamp_val(ALIGN(sel->r.top, pattern_size), border_size, |
| OV01A10_NATIVE_HEIGHT - 2 * border_size); |
| rect.width = clamp_val(ALIGN(sel->r.width, pattern_size), pattern_size, |
| OV01A10_NATIVE_WIDTH - rect.left - border_size); |
| rect.height = clamp_val(ALIGN(sel->r.height, pattern_size), pattern_size, |
| OV01A10_NATIVE_HEIGHT - rect.top - border_size); |
| |
| crop = v4l2_subdev_state_get_crop(sd_state, sel->pad); |
| |
| /* Reset the output size if the crop rectangle size has changed */ |
| if (rect.width != crop->width || rect.height != crop->height) { |
| format = v4l2_subdev_state_get_format(sd_state, sel->pad); |
| format->width = rect.width; |
| format->height = rect.height; |
| |
| if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE) |
| ov01a10_update_blank_ctrls(ov01a10, rect.width, |
| rect.height); |
| } |
| |
| *crop = rect; |
| sel->r = rect; |
| |
| return 0; |
| } |
| |
| static const struct v4l2_subdev_core_ops ov01a10_core_ops = { |
| .log_status = v4l2_ctrl_subdev_log_status, |
| }; |
| |
| static const struct v4l2_subdev_video_ops ov01a10_video_ops = { |
| .s_stream = ov01a10_set_stream, |
| }; |
| |
| static const struct v4l2_subdev_pad_ops ov01a10_pad_ops = { |
| .set_fmt = ov01a10_set_format, |
| .get_fmt = v4l2_subdev_get_fmt, |
| .get_selection = ov01a10_get_selection, |
| .set_selection = ov01a10_set_selection, |
| .enum_mbus_code = ov01a10_enum_mbus_code, |
| .enum_frame_size = ov01a10_enum_frame_size, |
| }; |
| |
| static const struct v4l2_subdev_ops ov01a10_subdev_ops = { |
| .core = &ov01a10_core_ops, |
| .video = &ov01a10_video_ops, |
| .pad = &ov01a10_pad_ops, |
| }; |
| |
| static const struct v4l2_subdev_internal_ops ov01a10_internal_ops = { |
| .init_state = ov01a10_init_state, |
| }; |
| |
| static const struct media_entity_operations ov01a10_subdev_entity_ops = { |
| .link_validate = v4l2_subdev_link_validate, |
| }; |
| |
| static int ov01a10_get_pm_resources(struct ov01a10 *ov01a10) |
| { |
| unsigned long freq; |
| int i, ret; |
| |
| ov01a10->clk = devm_v4l2_sensor_clk_get(ov01a10->dev, NULL); |
| if (IS_ERR(ov01a10->clk)) |
| return dev_err_probe(ov01a10->dev, PTR_ERR(ov01a10->clk), |
| "getting clock\n"); |
| |
| freq = clk_get_rate(ov01a10->clk); |
| if (freq != OV01A10_MCLK) |
| return dev_err_probe(ov01a10->dev, -EINVAL, |
| "external clock %lu is not supported", |
| freq); |
| |
| ov01a10->reset = devm_gpiod_get_optional(ov01a10->dev, "reset", |
| GPIOD_OUT_HIGH); |
| if (IS_ERR(ov01a10->reset)) |
| return dev_err_probe(ov01a10->dev, PTR_ERR(ov01a10->reset), |
| "getting reset gpio\n"); |
| |
| ov01a10->powerdown = devm_gpiod_get_optional(ov01a10->dev, "powerdown", |
| GPIOD_OUT_HIGH); |
| if (IS_ERR(ov01a10->powerdown)) |
| return dev_err_probe(ov01a10->dev, PTR_ERR(ov01a10->powerdown), |
| "getting powerdown gpio\n"); |
| |
| for (i = 0; i < ARRAY_SIZE(ov01a10_supply_names); i++) |
| ov01a10->supplies[i].supply = ov01a10_supply_names[i]; |
| |
| ret = devm_regulator_bulk_get(ov01a10->dev, |
| ARRAY_SIZE(ov01a10_supply_names), |
| ov01a10->supplies); |
| if (ret) |
| return dev_err_probe(ov01a10->dev, ret, "getting regulators\n"); |
| |
| return 0; |
| } |
| |
| static int ov01a10_power_on(struct device *dev) |
| { |
| struct v4l2_subdev *sd = dev_get_drvdata(dev); |
| struct ov01a10 *ov01a10 = to_ov01a10(sd); |
| int ret; |
| |
| ret = clk_prepare_enable(ov01a10->clk); |
| if (ret) { |
| dev_err(dev, "Error enabling clk: %d\n", ret); |
| return ret; |
| } |
| |
| ret = regulator_bulk_enable(ARRAY_SIZE(ov01a10_supply_names), |
| ov01a10->supplies); |
| if (ret) { |
| dev_err(dev, "Error enabling regulators: %d\n", ret); |
| clk_disable_unprepare(ov01a10->clk); |
| return ret; |
| } |
| |
| if (ov01a10->reset || ov01a10->powerdown) { |
| /* Assert reset/powerdown for at least 2ms on back to back off-on */ |
| fsleep(2000); |
| gpiod_set_value_cansleep(ov01a10->powerdown, 0); |
| gpiod_set_value_cansleep(ov01a10->reset, 0); |
| fsleep(20000); |
| } |
| |
| return 0; |
| } |
| |
| static int ov01a10_power_off(struct device *dev) |
| { |
| struct v4l2_subdev *sd = dev_get_drvdata(dev); |
| struct ov01a10 *ov01a10 = to_ov01a10(sd); |
| |
| gpiod_set_value_cansleep(ov01a10->reset, 1); |
| gpiod_set_value_cansleep(ov01a10->powerdown, 1); |
| |
| regulator_bulk_disable(ARRAY_SIZE(ov01a10_supply_names), |
| ov01a10->supplies); |
| |
| clk_disable_unprepare(ov01a10->clk); |
| return 0; |
| } |
| |
| static int ov01a10_identify_module(struct ov01a10 *ov01a10) |
| { |
| int ret; |
| u64 val; |
| |
| ret = cci_read(ov01a10->regmap, OV01A10_REG_CHIP_ID, &val, NULL); |
| if (ret) |
| return ret; |
| |
| if (val != OV01A10_CHIP_ID) { |
| dev_err(ov01a10->dev, "chip id mismatch: %x!=%llx\n", |
| OV01A10_CHIP_ID, val); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| static int ov01a10_check_hwcfg(struct ov01a10 *ov01a10) |
| { |
| struct v4l2_fwnode_endpoint bus_cfg = { |
| .bus_type = V4L2_MBUS_CSI2_DPHY |
| }; |
| struct fwnode_handle *ep, *fwnode = dev_fwnode(ov01a10->dev); |
| unsigned long link_freq_bitmap; |
| int ret; |
| |
| /* |
| * Sometimes the fwnode graph is initialized by the bridge driver, |
| * wait for this. |
| */ |
| ep = fwnode_graph_get_endpoint_by_id(fwnode, 0, 0, 0); |
| if (!ep) |
| return dev_err_probe(ov01a10->dev, -EPROBE_DEFER, |
| "waiting for fwnode graph endpoint\n"); |
| |
| ret = v4l2_fwnode_endpoint_alloc_parse(ep, &bus_cfg); |
| fwnode_handle_put(ep); |
| if (ret) |
| return dev_err_probe(ov01a10->dev, ret, "parsing endpoint\n"); |
| |
| ret = v4l2_link_freq_to_bitmap(ov01a10->dev, |
| bus_cfg.link_frequencies, |
| bus_cfg.nr_of_link_frequencies, |
| link_freq_menu_items, |
| ARRAY_SIZE(link_freq_menu_items), |
| &link_freq_bitmap); |
| if (ret) |
| goto check_hwcfg_error; |
| |
| /* v4l2_link_freq_to_bitmap() guarantees at least 1 bit is set */ |
| ov01a10->link_freq_index = ffs(link_freq_bitmap) - 1; |
| |
| if (bus_cfg.bus.mipi_csi2.num_data_lanes != OV01A10_DATA_LANES) { |
| ret = dev_err_probe(ov01a10->dev, -EINVAL, |
| "number of CSI2 data lanes %u is not supported\n", |
| bus_cfg.bus.mipi_csi2.num_data_lanes); |
| goto check_hwcfg_error; |
| } |
| |
| check_hwcfg_error: |
| v4l2_fwnode_endpoint_free(&bus_cfg); |
| return ret; |
| } |
| |
| static void ov01a10_remove(struct i2c_client *client) |
| { |
| struct v4l2_subdev *sd = i2c_get_clientdata(client); |
| |
| v4l2_async_unregister_subdev(sd); |
| v4l2_subdev_cleanup(sd); |
| media_entity_cleanup(&sd->entity); |
| v4l2_ctrl_handler_free(sd->ctrl_handler); |
| |
| pm_runtime_disable(&client->dev); |
| if (!pm_runtime_status_suspended(&client->dev)) { |
| ov01a10_power_off(&client->dev); |
| pm_runtime_set_suspended(&client->dev); |
| } |
| } |
| |
| static int ov01a10_probe(struct i2c_client *client) |
| { |
| const struct ov01a10_sensor_cfg *cfg; |
| struct ov01a10 *ov01a10; |
| int ret; |
| |
| cfg = device_get_match_data(&client->dev); |
| if (!cfg) |
| return -EINVAL; |
| |
| ov01a10 = devm_kzalloc(&client->dev, sizeof(*ov01a10), GFP_KERNEL); |
| if (!ov01a10) |
| return -ENOMEM; |
| |
| ov01a10->dev = &client->dev; |
| ov01a10->cfg = cfg; |
| |
| ov01a10->regmap = devm_cci_regmap_init_i2c(client, 16); |
| if (IS_ERR(ov01a10->regmap)) |
| return PTR_ERR(ov01a10->regmap); |
| |
| v4l2_i2c_subdev_init(&ov01a10->sd, client, &ov01a10_subdev_ops); |
| /* Override driver->name with actual sensor model */ |
| v4l2_i2c_subdev_set_name(&ov01a10->sd, client, cfg->model, NULL); |
| ov01a10->sd.internal_ops = &ov01a10_internal_ops; |
| |
| ret = ov01a10_check_hwcfg(ov01a10); |
| if (ret) |
| return ret; |
| |
| ret = ov01a10_get_pm_resources(ov01a10); |
| if (ret) |
| return ret; |
| |
| ret = ov01a10_power_on(&client->dev); |
| if (ret) |
| return ret; |
| |
| ret = ov01a10_identify_module(ov01a10); |
| if (ret) |
| goto err_power_off; |
| |
| ret = ov01a10_init_controls(ov01a10); |
| if (ret) |
| goto err_power_off; |
| |
| ov01a10->sd.state_lock = ov01a10->ctrl_handler.lock; |
| ov01a10->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; |
| ov01a10->sd.entity.ops = &ov01a10_subdev_entity_ops; |
| ov01a10->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR; |
| ov01a10->pad.flags = MEDIA_PAD_FL_SOURCE; |
| |
| ret = media_entity_pads_init(&ov01a10->sd.entity, 1, &ov01a10->pad); |
| if (ret) |
| goto err_handler_free; |
| |
| ret = v4l2_subdev_init_finalize(&ov01a10->sd); |
| if (ret) |
| goto err_media_entity_cleanup; |
| |
| /* |
| * Device is already turned on by i2c-core with ACPI domain PM. |
| * Enable runtime PM and turn off the device. |
| */ |
| pm_runtime_set_active(&client->dev); |
| pm_runtime_enable(&client->dev); |
| pm_runtime_idle(&client->dev); |
| |
| ret = v4l2_async_register_subdev_sensor(&ov01a10->sd); |
| if (ret) |
| goto err_pm_disable; |
| |
| return 0; |
| |
| err_pm_disable: |
| pm_runtime_disable(&client->dev); |
| pm_runtime_set_suspended(&client->dev); |
| v4l2_subdev_cleanup(&ov01a10->sd); |
| |
| err_media_entity_cleanup: |
| media_entity_cleanup(&ov01a10->sd.entity); |
| |
| err_handler_free: |
| v4l2_ctrl_handler_free(ov01a10->sd.ctrl_handler); |
| |
| err_power_off: |
| ov01a10_power_off(&client->dev); |
| |
| return ret; |
| } |
| |
| static DEFINE_RUNTIME_DEV_PM_OPS(ov01a10_pm_ops, ov01a10_power_off, |
| ov01a10_power_on, NULL); |
| |
| #ifdef CONFIG_ACPI |
| /* |
| * The native ov01a10 bayer-pattern is GBRG, but there was a driver bug enabling |
| * hflip/mirroring by default resulting in BGGR. Because of this bug Intel's |
| * proprietary IPU6 userspace stack expects BGGR. So we report BGGR to not break |
| * userspace and fix things up by shifting the crop window-x coordinate by 1 |
| * when hflip is *disabled*. |
| */ |
| static const struct ov01a10_sensor_cfg ov01a10_cfg = { |
| .model = "ov01a10", |
| .bus_fmt = MEDIA_BUS_FMT_SBGGR10_1X10, |
| .pattern_size = 2, /* 2x2 */ |
| .border_size = 2, |
| .format1_base_val = 0xa0, |
| .invert_hflip_shift = true, |
| .invert_vflip_shift = false, |
| }; |
| |
| static const struct ov01a10_sensor_cfg ov01a1b_cfg = { |
| .model = "ov01a1b", |
| .bus_fmt = MEDIA_BUS_FMT_Y10_1X10, |
| .pattern_size = 2, /* Keep coordinates aligned to a multiple of 2 */ |
| .border_size = 0, |
| .format1_base_val = 0xa0, |
| }; |
| |
| static const struct acpi_device_id ov01a10_acpi_ids[] = { |
| { "OVTI01A0", (uintptr_t)&ov01a10_cfg }, |
| { "OVTI01AB", (uintptr_t)&ov01a1b_cfg }, |
| { } |
| }; |
| |
| MODULE_DEVICE_TABLE(acpi, ov01a10_acpi_ids); |
| #endif |
| |
| static struct i2c_driver ov01a10_i2c_driver = { |
| .driver = { |
| .name = "ov01a10", |
| .pm = pm_sleep_ptr(&ov01a10_pm_ops), |
| .acpi_match_table = ACPI_PTR(ov01a10_acpi_ids), |
| }, |
| .probe = ov01a10_probe, |
| .remove = ov01a10_remove, |
| }; |
| |
| module_i2c_driver(ov01a10_i2c_driver); |
| |
| MODULE_AUTHOR("Bingbu Cao <bingbu.cao@intel.com>"); |
| MODULE_AUTHOR("Wang Yating <yating.wang@intel.com>"); |
| MODULE_DESCRIPTION("OmniVision OV01A10 sensor driver"); |
| MODULE_LICENSE("GPL"); |