| # | |
| # PHY | |
| # | |
| menu "PHY Subsystem" | |
| config GENERIC_PHY | |
| bool "PHY Core" | |
| help | |
| Generic PHY support. | |
| This framework is designed to provide a generic interface for PHY | |
| devices present in the kernel. This layer will have the generic | |
| API by which phy drivers can create PHY using the phy framework and | |
| phy users can obtain reference to the PHY. All the users of this | |
| framework should select this config. | |
| config PHY_EXYNOS_MIPI_VIDEO | |
| tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver" | |
| depends on HAS_IOMEM | |
| depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST | |
| select GENERIC_PHY | |
| default y if ARCH_S5PV210 || ARCH_EXYNOS | |
| help | |
| Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P | |
| and EXYNOS SoCs. | |
| config PHY_MVEBU_SATA | |
| def_bool y | |
| depends on ARCH_KIRKWOOD || ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD | |
| depends on OF | |
| select GENERIC_PHY | |
| config OMAP_CONTROL_PHY | |
| tristate "OMAP CONTROL PHY Driver" | |
| depends on ARCH_OMAP2PLUS || COMPILE_TEST | |
| help | |
| Enable this to add support for the PHY part present in the control | |
| module. This driver has API to power on the USB2 PHY and to write to | |
| the mailbox. The mailbox is present only in omap4 and the register to | |
| power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an | |
| additional register to power on USB3 PHY/SATA PHY/PCIE PHY | |
| (PIPE3 PHY). | |
| config OMAP_USB2 | |
| tristate "OMAP USB2 PHY Driver" | |
| depends on ARCH_OMAP2PLUS | |
| depends on USB_PHY | |
| select GENERIC_PHY | |
| select OMAP_CONTROL_PHY | |
| depends on OMAP_OCP2SCP | |
| help | |
| Enable this to support the transceiver that is part of SOC. This | |
| driver takes care of all the PHY functionality apart from comparator. | |
| The USB OTG controller communicates with the comparator using this | |
| driver. | |
| config TI_PIPE3 | |
| tristate "TI PIPE3 PHY Driver" | |
| depends on ARCH_OMAP2PLUS || COMPILE_TEST | |
| select GENERIC_PHY | |
| select OMAP_CONTROL_PHY | |
| depends on OMAP_OCP2SCP | |
| help | |
| Enable this to support the PIPE3 PHY that is part of TI SOCs. This | |
| driver takes care of all the PHY functionality apart from comparator. | |
| This driver interacts with the "OMAP Control PHY Driver" to power | |
| on/off the PHY. | |
| config TWL4030_USB | |
| tristate "TWL4030 USB Transceiver Driver" | |
| depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS | |
| depends on USB_PHY | |
| select GENERIC_PHY | |
| help | |
| Enable this to support the USB OTG transceiver on TWL4030 | |
| family chips (including the TWL5030 and TPS659x0 devices). | |
| This transceiver supports high and full speed devices plus, | |
| in host mode, low speed. | |
| config PHY_EXYNOS_DP_VIDEO | |
| tristate "EXYNOS SoC series Display Port PHY driver" | |
| depends on OF | |
| depends on ARCH_EXYNOS || COMPILE_TEST | |
| default ARCH_EXYNOS | |
| select GENERIC_PHY | |
| help | |
| Support for Display Port PHY found on Samsung EXYNOS SoCs. | |
| config BCM_KONA_USB2_PHY | |
| tristate "Broadcom Kona USB2 PHY Driver" | |
| depends on HAS_IOMEM | |
| select GENERIC_PHY | |
| help | |
| Enable this to support the Broadcom Kona USB 2.0 PHY. | |
| config PHY_EXYNOS5250_SATA | |
| tristate "Exynos5250 Sata SerDes/PHY driver" | |
| depends on SOC_EXYNOS5250 | |
| depends on HAS_IOMEM | |
| depends on OF | |
| select GENERIC_PHY | |
| select I2C | |
| select I2C_S3C2410 | |
| select MFD_SYSCON | |
| help | |
| Enable this to support SATA SerDes/Phy found on Samsung's | |
| Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s, | |
| SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host | |
| port to accept one SATA device. | |
| config PHY_SUN4I_USB | |
| tristate "Allwinner sunxi SoC USB PHY driver" | |
| depends on ARCH_SUNXI && HAS_IOMEM && OF | |
| depends on RESET_CONTROLLER | |
| select GENERIC_PHY | |
| help | |
| Enable this to support the transceiver that is part of Allwinner | |
| sunxi SoCs. | |
| This driver controls the entire USB PHY block, both the USB OTG | |
| parts, as well as the 2 regular USB 2 host PHYs. | |
| config PHY_SAMSUNG_USB2 | |
| tristate "Samsung USB 2.0 PHY driver" | |
| depends on HAS_IOMEM | |
| select GENERIC_PHY | |
| select MFD_SYSCON | |
| help | |
| Enable this to support the Samsung USB 2.0 PHY driver for Samsung | |
| SoCs. This driver provides the interface for USB 2.0 PHY. Support for | |
| particular SoCs has to be enabled in addition to this driver. Number | |
| and type of supported phys depends on the SoC. | |
| config PHY_EXYNOS4210_USB2 | |
| bool "Support for Exynos 4210" | |
| depends on PHY_SAMSUNG_USB2 | |
| depends on CPU_EXYNOS4210 | |
| help | |
| Enable USB PHY support for Exynos 4210. This option requires that | |
| Samsung USB 2.0 PHY driver is enabled and means that support for this | |
| particular SoC is compiled in the driver. In case of Exynos 4210 four | |
| phys are available - device, host, HSIC0 and HSIC1. | |
| config PHY_EXYNOS4X12_USB2 | |
| bool "Support for Exynos 4x12" | |
| depends on PHY_SAMSUNG_USB2 | |
| depends on (SOC_EXYNOS4212 || SOC_EXYNOS4412) | |
| help | |
| Enable USB PHY support for Exynos 4x12. This option requires that | |
| Samsung USB 2.0 PHY driver is enabled and means that support for this | |
| particular SoC is compiled in the driver. In case of Exynos 4x12 four | |
| phys are available - device, host, HSIC0 and HSIC1. | |
| config PHY_EXYNOS5250_USB2 | |
| bool "Support for Exynos 5250" | |
| depends on PHY_SAMSUNG_USB2 | |
| depends on SOC_EXYNOS5250 | |
| help | |
| Enable USB PHY support for Exynos 5250. This option requires that | |
| Samsung USB 2.0 PHY driver is enabled and means that support for this | |
| particular SoC is compiled in the driver. In case of Exynos 5250 four | |
| phys are available - device, host, HSIC0 and HSIC. | |
| config PHY_EXYNOS5_USBDRD | |
| tristate "Exynos5 SoC series USB DRD PHY driver" | |
| depends on ARCH_EXYNOS5 && OF | |
| depends on HAS_IOMEM | |
| select GENERIC_PHY | |
| select MFD_SYSCON | |
| help | |
| Enable USB DRD PHY support for Exynos 5 SoC series. | |
| This driver provides PHY interface for USB 3.0 DRD controller | |
| present on Exynos5 SoC series. | |
| config PHY_XGENE | |
| tristate "APM X-Gene 15Gbps PHY support" | |
| depends on HAS_IOMEM && OF && (ARM64 || COMPILE_TEST) | |
| select GENERIC_PHY | |
| help | |
| This option enables support for APM X-Gene SoC multi-purpose PHY. | |
| endmenu |