| // SPDX-License-Identifier: GPL-2.0-or-later | 
 | /* | 
 |  * Driver for the 1250-EV1 audio I/O module | 
 |  * | 
 |  * Copyright 2011 Wolfson Microelectronics plc | 
 |  */ | 
 |  | 
 | #include <linux/init.h> | 
 | #include <linux/module.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/i2c.h> | 
 | #include <linux/gpio/consumer.h> | 
 |  | 
 | #include <sound/soc.h> | 
 | #include <sound/soc-dapm.h> | 
 |  | 
 | struct wm1250_priv { | 
 | 	struct gpio_desc *clk_ena; | 
 | 	struct gpio_desc *clk_sel0; | 
 | 	struct gpio_desc *clk_sel1; | 
 | 	struct gpio_desc *osr; | 
 | 	struct gpio_desc *master; | 
 | }; | 
 |  | 
 | static int wm1250_ev1_set_bias_level(struct snd_soc_component *component, | 
 | 				     enum snd_soc_bias_level level) | 
 | { | 
 | 	struct wm1250_priv *wm1250 = dev_get_drvdata(component->dev); | 
 |  | 
 | 	switch (level) { | 
 | 	case SND_SOC_BIAS_ON: | 
 | 		break; | 
 |  | 
 | 	case SND_SOC_BIAS_PREPARE: | 
 | 		break; | 
 |  | 
 | 	case SND_SOC_BIAS_STANDBY: | 
 | 		gpiod_set_value_cansleep(wm1250->clk_ena, 1); | 
 | 		break; | 
 |  | 
 | 	case SND_SOC_BIAS_OFF: | 
 | 		gpiod_set_value_cansleep(wm1250->clk_ena, 0); | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct snd_soc_dapm_widget wm1250_ev1_dapm_widgets[] = { | 
 | SND_SOC_DAPM_ADC("ADC", "wm1250-ev1 Capture", SND_SOC_NOPM, 0, 0), | 
 | SND_SOC_DAPM_DAC("DAC", "wm1250-ev1 Playback", SND_SOC_NOPM, 0, 0), | 
 |  | 
 | SND_SOC_DAPM_INPUT("WM1250 Input"), | 
 | SND_SOC_DAPM_OUTPUT("WM1250 Output"), | 
 | }; | 
 |  | 
 | static const struct snd_soc_dapm_route wm1250_ev1_dapm_routes[] = { | 
 | 	{ "ADC", NULL, "WM1250 Input" }, | 
 | 	{ "WM1250 Output", NULL, "DAC" }, | 
 | }; | 
 |  | 
 | static int wm1250_ev1_hw_params(struct snd_pcm_substream *substream, | 
 | 				struct snd_pcm_hw_params *params, | 
 | 				struct snd_soc_dai *dai) | 
 | { | 
 | 	struct wm1250_priv *wm1250 = snd_soc_component_get_drvdata(dai->component); | 
 |  | 
 | 	switch (params_rate(params)) { | 
 | 	case 8000: | 
 | 		gpiod_set_value(wm1250->clk_sel0, 1); | 
 | 		gpiod_set_value(wm1250->clk_sel1, 1); | 
 | 		break; | 
 | 	case 16000: | 
 | 		gpiod_set_value(wm1250->clk_sel0, 0); | 
 | 		gpiod_set_value(wm1250->clk_sel1, 1); | 
 | 		break; | 
 | 	case 32000: | 
 | 		gpiod_set_value(wm1250->clk_sel0, 1); | 
 | 		gpiod_set_value(wm1250->clk_sel1, 0); | 
 | 		break; | 
 | 	case 64000: | 
 | 		gpiod_set_value(wm1250->clk_sel0, 0); | 
 | 		gpiod_set_value(wm1250->clk_sel1, 0); | 
 | 		break; | 
 | 	default: | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct snd_soc_dai_ops wm1250_ev1_ops = { | 
 | 	.hw_params = wm1250_ev1_hw_params, | 
 | }; | 
 |  | 
 | #define WM1250_EV1_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 |\ | 
 | 			  SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_64000) | 
 |  | 
 | static struct snd_soc_dai_driver wm1250_ev1_dai = { | 
 | 	.name = "wm1250-ev1", | 
 | 	.playback = { | 
 | 		.stream_name = "Playback", | 
 | 		.channels_min = 1, | 
 | 		.channels_max = 2, | 
 | 		.rates = WM1250_EV1_RATES, | 
 | 		.formats = SNDRV_PCM_FMTBIT_S16_LE, | 
 | 	}, | 
 | 	.capture = { | 
 | 		.stream_name = "Capture", | 
 | 		.channels_min = 1, | 
 | 		.channels_max = 2, | 
 | 		.rates = WM1250_EV1_RATES, | 
 | 		.formats = SNDRV_PCM_FMTBIT_S16_LE, | 
 | 	}, | 
 | 	.ops = &wm1250_ev1_ops, | 
 | }; | 
 |  | 
 | static const struct snd_soc_component_driver soc_component_dev_wm1250_ev1 = { | 
 | 	.dapm_widgets		= wm1250_ev1_dapm_widgets, | 
 | 	.num_dapm_widgets	= ARRAY_SIZE(wm1250_ev1_dapm_widgets), | 
 | 	.dapm_routes		= wm1250_ev1_dapm_routes, | 
 | 	.num_dapm_routes	= ARRAY_SIZE(wm1250_ev1_dapm_routes), | 
 | 	.set_bias_level		= wm1250_ev1_set_bias_level, | 
 | 	.use_pmdown_time	= 1, | 
 | 	.endianness		= 1, | 
 | }; | 
 |  | 
 | static int wm1250_ev1_pdata(struct i2c_client *i2c) | 
 | { | 
 | 	struct wm1250_ev1_pdata *pdata = dev_get_platdata(&i2c->dev); | 
 | 	struct wm1250_priv *wm1250; | 
 |  | 
 | 	if (!pdata) | 
 | 		return 0; | 
 |  | 
 | 	wm1250 = devm_kzalloc(&i2c->dev, sizeof(*wm1250), GFP_KERNEL); | 
 | 	if (!wm1250) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	wm1250->clk_ena = devm_gpiod_get(&i2c->dev, "clk-ena", GPIOD_OUT_LOW); | 
 | 	if (IS_ERR(wm1250->clk_ena)) | 
 | 		return dev_err_probe(&i2c->dev, PTR_ERR(wm1250->clk_ena), | 
 | 				     "failed to get clock enable GPIO\n"); | 
 |  | 
 | 	wm1250->clk_sel0 = devm_gpiod_get(&i2c->dev, "clk-sel0", GPIOD_OUT_HIGH); | 
 | 	if (IS_ERR(wm1250->clk_sel0)) | 
 | 		return dev_err_probe(&i2c->dev, PTR_ERR(wm1250->clk_sel0), | 
 | 				     "failed to get clock sel0 GPIO\n"); | 
 |  | 
 | 	wm1250->clk_sel1 = devm_gpiod_get(&i2c->dev, "clk-sel1", GPIOD_OUT_HIGH); | 
 | 	if (IS_ERR(wm1250->clk_sel1)) | 
 | 		return dev_err_probe(&i2c->dev, PTR_ERR(wm1250->clk_sel1), | 
 | 				     "failed to get clock sel1 GPIO\n"); | 
 |  | 
 | 	wm1250->osr = devm_gpiod_get(&i2c->dev, "osr", GPIOD_OUT_LOW); | 
 | 	if (IS_ERR(wm1250->osr)) | 
 | 		return dev_err_probe(&i2c->dev, PTR_ERR(wm1250->osr), | 
 | 				     "failed to get OSR GPIO\n"); | 
 |  | 
 | 	wm1250->master = devm_gpiod_get(&i2c->dev, "master", GPIOD_OUT_LOW); | 
 | 	if (IS_ERR(wm1250->master)) | 
 | 		return dev_err_probe(&i2c->dev, PTR_ERR(wm1250->master), | 
 | 				     "failed to get MASTER GPIO\n"); | 
 |  | 
 | 	dev_set_drvdata(&i2c->dev, wm1250); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int wm1250_ev1_probe(struct i2c_client *i2c) | 
 | { | 
 | 	int id, board, rev, ret; | 
 |  | 
 | 	dev_set_drvdata(&i2c->dev, NULL); | 
 |  | 
 | 	board = i2c_smbus_read_byte_data(i2c, 0); | 
 | 	if (board < 0) { | 
 | 		dev_err(&i2c->dev, "Failed to read ID: %d\n", board); | 
 | 		return board; | 
 | 	} | 
 |  | 
 | 	id = (board & 0xfe) >> 2; | 
 | 	rev = board & 0x3; | 
 |  | 
 | 	if (id != 1) { | 
 | 		dev_err(&i2c->dev, "Unknown board ID %d\n", id); | 
 | 		return -ENODEV; | 
 | 	} | 
 |  | 
 | 	dev_info(&i2c->dev, "revision %d\n", rev + 1); | 
 |  | 
 | 	ret = wm1250_ev1_pdata(i2c); | 
 | 	if (ret != 0) | 
 | 		return ret; | 
 |  | 
 | 	ret = devm_snd_soc_register_component(&i2c->dev, &soc_component_dev_wm1250_ev1, | 
 | 				     &wm1250_ev1_dai, 1); | 
 | 	if (ret != 0) { | 
 | 		dev_err(&i2c->dev, "Failed to register CODEC: %d\n", ret); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct i2c_device_id wm1250_ev1_i2c_id[] = { | 
 | 	{ "wm1250-ev1" }, | 
 | 	{ } | 
 | }; | 
 | MODULE_DEVICE_TABLE(i2c, wm1250_ev1_i2c_id); | 
 |  | 
 | static struct i2c_driver wm1250_ev1_i2c_driver = { | 
 | 	.driver = { | 
 | 		.name = "wm1250-ev1", | 
 | 	}, | 
 | 	.probe =    wm1250_ev1_probe, | 
 | 	.id_table = wm1250_ev1_i2c_id, | 
 | }; | 
 |  | 
 | module_i2c_driver(wm1250_ev1_i2c_driver); | 
 |  | 
 | MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); | 
 | MODULE_DESCRIPTION("WM1250-EV1 audio I/O module driver"); | 
 | MODULE_LICENSE("GPL"); |