drivers/usb/misc/Kconfig - pub/scm/linux/kernel/git/stable/linux-stable - Git at Google


            
            #

            
            # USB Miscellaneous driver configuration

            
            #

            
            comment "USB Miscellaneous drivers"


            config USB_EMI62

            
            	tristate "EMI 6|2m USB Audio interface support"

            
            	---help---

            
            	  This driver loads firmware to Emagic EMI 6|2m low latency USB

            
            	  Audio and Midi interface.


            	  After firmware load the device is handled with standard linux

            
            	  USB Audio driver.


            	  This code is also available as a module ( = code which can be

            
            	  inserted in and removed from the running kernel whenever you want).

            
            	  The module will be called audio. If you want to compile it as a

            
            	  module, say M here and read <file:Documentation/kbuild/modules.txt>.


            config USB_EMI26

            
            	tristate "EMI 2|6 USB Audio interface support"

            
            	---help---

            
            	  This driver loads firmware to Emagic EMI 2|6 low latency USB

            
            	  Audio interface.


            	  After firmware load the device is handled with standard linux

            
            	  USB Audio driver.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called emi26.


            config USB_ADUTUX

            
            	tristate "ADU devices from Ontrak Control Systems"

            
            	help

            
            	  Say Y if you want to use an ADU device from Ontrak Control

            
            	  Systems.


            	  To compile this driver as a module, choose M here.  The module

            
            	  will be called adutux.


            config USB_SEVSEG

            
            	tristate "USB 7-Segment LED Display"

            
            	help

            
            	  Say Y here if you have a USB 7-Segment Display by Delcom


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called usbsevseg.


            config USB_RIO500

            
            	tristate "USB Diamond Rio500 support"

            
            	help

            
            	  Say Y here if you want to connect a USB Rio500 mp3 player to your

            
            	  computer's USB port. Please read <file:Documentation/usb/rio.txt>

            
            	  for more information.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called rio500.


            config USB_LEGOTOWER

            
            	tristate "USB Lego Infrared Tower support"

            
            	help

            
            	  Say Y here if you want to connect a USB Lego Infrared Tower to your

            
            	  computer's USB port.


            	  This code is also available as a module ( = code which can be

            
            	  inserted in and removed from the running kernel whenever you want).

            
            	  The module will be called legousbtower. If you want to compile it as

            
            	  a module, say M here and read

            
            	  <file:Documentation/kbuild/modules.txt>.


            config USB_LCD

            
            	tristate "USB LCD driver support"

            
            	help

            
            	  Say Y here if you want to connect an USBLCD to your computer's

            
            	  USB port. The USBLCD is a small USB interface board for

            
            	  alphanumeric LCD modules. See <http://www.usblcd.de/> for more

            
            	  information.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called usblcd.


            config USB_CYPRESS_CY7C63

            
            	tristate "Cypress CY7C63xxx USB driver support"

            
            	help

            
            	  Say Y here if you want to connect a Cypress CY7C63xxx

            
            	  micro controller to your computer's USB port. Currently this

            
            	  driver supports the pre-programmed devices (incl. firmware)

            
            	  by AK Modul-Bus Computer GmbH.


            	  Please see: http://www.ak-modul-bus.de/stat/mikrocontroller.html


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called cypress_cy7c63.


            config USB_CYTHERM

            
            	tristate "Cypress USB thermometer driver support"

            
            	help

            
            	  Say Y here if you want to connect a Cypress USB thermometer

            
            	  device to your computer's USB port. This device is also known

            
            	  as the Cypress USB Starter kit or demo board. The Elektor

            
            	  magazine published a modified version of this device in issue

            
            	  #291.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called cytherm.


            config USB_IDMOUSE

            
            	tristate "Siemens ID USB Mouse Fingerprint sensor support"

            
            	help

            
            	  Say Y here if you want to use the fingerprint sensor on

            
            	  the Siemens ID Mouse. There is also a Siemens ID Mouse

            
            	  _Professional_, which has not been tested with this driver,

            
            	  but uses the same sensor and may therefore work.


            	  This driver creates an entry "/dev/idmouseX" or "/dev/usb/idmouseX",

            
            	  which can be used by, e.g.,"cat /dev/idmouse0 > fingerprint.pnm".


            	  See also <http://www.fs.tum.de/~echtler/idmouse/>.


            config USB_FTDI_ELAN

            
            	tristate "Elan PCMCIA CardBus Adapter USB Client"

            
            	help

            
            	  ELAN's Uxxx series of adapters are USB to PCMCIA CardBus adapters.

            
            	  Currently only the U132 adapter is available.


            	  The U132 is specifically designed for CardBus PC cards that contain

            
            	  an OHCI host controller. Typical PC cards are the Orange Mobile 3G

            
            	  Option GlobeTrotter Fusion card. The U132 adapter will *NOT* work

            
            	  with PC cards that do not contain an OHCI controller. To use a U132

            
            	  adapter you will need this "ftdi-elan" module as well as the "u132-hcd"

            
            	  module which is a USB host controller driver that talks to the OHCI

            
            	  controller within CardBus card that are inserted in the U132 adapter.


            	  This driver has been tested with a CardBus OHCI USB adapter, and

            
            	  worked with a USB PEN Drive inserted into the first USB port of

            
            	  the PCCARD. A rather pointless thing to do, but useful for testing.


            	  See also the USB_U132_HCD entry "Elan U132 Adapter Host Controller"


            	  It is safe to say M here.


            config USB_APPLEDISPLAY

            
            	tristate "Apple Cinema Display support"

            
            	select BACKLIGHT_LCD_SUPPORT

            
            	select BACKLIGHT_CLASS_DEVICE

            
            	help

            
            	  Say Y here if you want to control the backlight of Apple Cinema

            
            	  Displays over USB. This driver provides a sysfs interface.


            source "drivers/usb/misc/sisusbvga/Kconfig"


            config USB_LD

            
            	tristate "USB LD driver"

            
            	help

            
            	  This driver is for generic USB devices that use interrupt transfers,

            
            	  like LD Didactic's USB devices.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called ldusb.


            config USB_TRANCEVIBRATOR

            
            	tristate "PlayStation 2 Trance Vibrator driver support"

            
            	help

            
            	  Say Y here if you want to connect a PlayStation 2 Trance Vibrator

            
            	  device to your computer's USB port.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called trancevibrator.


            config USB_IOWARRIOR

            
            	tristate "IO Warrior driver support"

            
            	help

            
            	  Say Y here if you want to support the IO Warrior devices from Code

            
            	  Mercenaries.  This includes support for the following devices:

            
            	  	IO Warrior 40

            
            		IO Warrior 24

            
            		IO Warrior 56

            
            		IO Warrior 24 Power Vampire


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called iowarrior.


            config USB_TEST

            
            	tristate "USB testing driver"

            
            	help

            
            	  This driver is for testing host controller software.  It is used

            
            	  with specialized device firmware for regression and stress testing,

            
            	  to help prevent problems from cropping up with "real" drivers.


            	  See <http://www.linux-usb.org/usbtest/> for more information,

            
            	  including sample test device firmware and "how to use it".


            config USB_EHSET_TEST_FIXTURE

            
                    tristate "USB EHSET Test Fixture driver"

            
                    help

            
            	  Say Y here if you want to support the special test fixture device

            
            	  used for the USB-IF Embedded Host High-Speed Electrical Test procedure.


            	  When the test fixture is connected, it can enumerate as one of several

            
            	  VID/PID pairs. This driver then initiates a corresponding test mode on

            
            	  the downstream port to which the test fixture is attached.


            	  See <http://www.usb.org/developers/onthego/EHSET_v1.01.pdf> for more

            
            	  information.


            config USB_ISIGHTFW

            
            	tristate "iSight firmware loading support"

            
            	select FW_LOADER

            
            	help

            
            	  This driver loads firmware for USB Apple iSight cameras, allowing

            
            	  them to be driven by the USB video class driver available at

            
            	  http://linux-uvc.berlios.de


            	  The firmware for this driver must be extracted from the MacOS

            
            	  driver beforehand. Tools for doing so are available at

            
            	  http://bersace03.free.fr


            config USB_YUREX

            
            	tristate "USB YUREX driver support"

            
            	help

            
            	  Say Y here if you want to connect a YUREX to your computer's

            
            	  USB port. The YUREX is a leg-shakes sensor. See

            
            	  <http://bbu.kayac.com/en/> for further information.

            
            	  This driver supports read/write of leg-shakes counter and

            
            	  fasync for the counter update via a device file /dev/yurex*.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called yurex.


            config USB_EZUSB_FX2

            
            	tristate "Functions for loading firmware on EZUSB chips"

            
            	help

            
            	  Say Y here if you need EZUSB device support.

            
            	  (Cypress FX/FX2/FX2LP microcontrollers)


            config USB_HSIC_USB3503

            
                   tristate "USB3503 HSIC to USB20 Driver"

            
                   depends on I2C

            
                   select REGMAP_I2C

            
                   help

            
                     This option enables support for SMSC USB3503 HSIC to USB 2.0 Driver.


            config USB_HSIC_USB4604

            
                   tristate "USB4604 HSIC to USB20 Driver"

            
                   depends on I2C

            
                   help

            
                     This option enables support for SMSC USB4604 HSIC to USB 2.0 Driver.


            config USB_LINK_LAYER_TEST

            
            	tristate "USB Link Layer Test driver"

            
            	help

            
            	  This driver is for generating specific traffic for Super Speed Link

            
            	  Layer Test Device. Say Y only when you want to conduct USB Super Speed

            
            	  Link Layer Test for host controllers.


            config USB_CHAOSKEY

            
            	tristate "ChaosKey random number generator driver support"

            
            	depends on HW_RANDOM

            
            	help

            
            	  Say Y here if you want to connect an AltusMetrum ChaosKey or

            
            	  Araneus Alea I to your computer's USB port. These devices

            
            	  are hardware random number generators which hook into the

            
            	  kernel entropy pool to ensure a large supply of entropy for

            
            	  /dev/random and /dev/urandom and also provides direct access

            
            	  via /dev/chaoskeyX


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called chaoskey.


            config UCSI

            
            	tristate "USB Type-C Connector System Software Interface driver"

            
            	depends on ACPI

            
            	help

            
            	  UCSI driver is meant to be used as a convenience tool for desktop and

            
            	  server systems that are not equipped to handle USB in device mode. It

            
            	  will always select USB host role for the USB Type-C ports on systems

            
            	  that provide UCSI interface.


            	  USB Type-C Connector System Software Interface (UCSI) is a

            
            	  specification for an interface that allows the Operating System to

            
            	  control the USB Type-C ports on a system. Things the need controlling

            
            	  include the USB Data Role (host or device), and when USB Power

            
            	  Delivery is supported, the Power Role (source or sink). With USB

            
            	  Type-C connectors, when two dual role capable devices are attached

            
            	  together, the data role is selected randomly. Therefore it is

            
            	  important to give the OS a way to select the role. Otherwise the user

            
            	  would have to unplug and replug in order in order to attempt to swap

            
            	  the data and power roles.


            	  The UCSI specification can be downloaded from:

            
            	  http://www.intel.com/content/www/us/en/io/universal-serial-bus/usb-type-c-ucsi-spec.html


            	  To compile the driver as a module, choose M here: the module will be

            
            	  called ucsi.
	#
	# USB Miscellaneous driver configuration
	#
	comment "USB Miscellaneous drivers"

	config USB_EMI62
	tristate "EMI 6\|2m USB Audio interface support"
	---help---
	This driver loads firmware to Emagic EMI 6\|2m low latency USB
	Audio and Midi interface.

	After firmware load the device is handled with standard linux
	USB Audio driver.

	This code is also available as a module ( = code which can be
	inserted in and removed from the running kernel whenever you want).
	The module will be called audio. If you want to compile it as a
	module, say M here and read <file:Documentation/kbuild/modules.txt>.

	config USB_EMI26
	tristate "EMI 2\|6 USB Audio interface support"
	---help---
	This driver loads firmware to Emagic EMI 2\|6 low latency USB
	Audio interface.

	After firmware load the device is handled with standard linux
	USB Audio driver.

	To compile this driver as a module, choose M here: the
	module will be called emi26.

	config USB_ADUTUX
	tristate "ADU devices from Ontrak Control Systems"
	help
	Say Y if you want to use an ADU device from Ontrak Control
	Systems.

	To compile this driver as a module, choose M here. The module
	will be called adutux.

	config USB_SEVSEG
	tristate "USB 7-Segment LED Display"
	help
	Say Y here if you have a USB 7-Segment Display by Delcom

	To compile this driver as a module, choose M here: the
	module will be called usbsevseg.

	config USB_RIO500
	tristate "USB Diamond Rio500 support"
	help
	Say Y here if you want to connect a USB Rio500 mp3 player to your
	computer's USB port. Please read <file:Documentation/usb/rio.txt>
	for more information.

	To compile this driver as a module, choose M here: the
	module will be called rio500.

	config USB_LEGOTOWER
	tristate "USB Lego Infrared Tower support"
	help
	Say Y here if you want to connect a USB Lego Infrared Tower to your
	computer's USB port.

	This code is also available as a module ( = code which can be
	inserted in and removed from the running kernel whenever you want).
	The module will be called legousbtower. If you want to compile it as
	a module, say M here and read
	<file:Documentation/kbuild/modules.txt>.

	config USB_LCD
	tristate "USB LCD driver support"
	help
	Say Y here if you want to connect an USBLCD to your computer's
	USB port. The USBLCD is a small USB interface board for
	alphanumeric LCD modules. See <http://www.usblcd.de/> for more
	information.

	To compile this driver as a module, choose M here: the
	module will be called usblcd.

	config USB_CYPRESS_CY7C63
	tristate "Cypress CY7C63xxx USB driver support"
	help
	Say Y here if you want to connect a Cypress CY7C63xxx
	micro controller to your computer's USB port. Currently this
	driver supports the pre-programmed devices (incl. firmware)
	by AK Modul-Bus Computer GmbH.

	Please see: http://www.ak-modul-bus.de/stat/mikrocontroller.html

	To compile this driver as a module, choose M here: the
	module will be called cypress_cy7c63.

	config USB_CYTHERM
	tristate "Cypress USB thermometer driver support"
	help
	Say Y here if you want to connect a Cypress USB thermometer
	device to your computer's USB port. This device is also known
	as the Cypress USB Starter kit or demo board. The Elektor
	magazine published a modified version of this device in issue
	#291.

	To compile this driver as a module, choose M here: the
	module will be called cytherm.

	config USB_IDMOUSE
	tristate "Siemens ID USB Mouse Fingerprint sensor support"
	help
	Say Y here if you want to use the fingerprint sensor on
	the Siemens ID Mouse. There is also a Siemens ID Mouse
	_Professional_, which has not been tested with this driver,
	but uses the same sensor and may therefore work.

	This driver creates an entry "/dev/idmouseX" or "/dev/usb/idmouseX",
	which can be used by, e.g.,"cat /dev/idmouse0 > fingerprint.pnm".

	See also <http://www.fs.tum.de/~echtler/idmouse/>.

	config USB_FTDI_ELAN
	tristate "Elan PCMCIA CardBus Adapter USB Client"
	help
	ELAN's Uxxx series of adapters are USB to PCMCIA CardBus adapters.
	Currently only the U132 adapter is available.

	The U132 is specifically designed for CardBus PC cards that contain
	an OHCI host controller. Typical PC cards are the Orange Mobile 3G
	Option GlobeTrotter Fusion card. The U132 adapter will NOT work
	with PC cards that do not contain an OHCI controller. To use a U132
	adapter you will need this "ftdi-elan" module as well as the "u132-hcd"
	module which is a USB host controller driver that talks to the OHCI
	controller within CardBus card that are inserted in the U132 adapter.

	This driver has been tested with a CardBus OHCI USB adapter, and
	worked with a USB PEN Drive inserted into the first USB port of
	the PCCARD. A rather pointless thing to do, but useful for testing.

	See also the USB_U132_HCD entry "Elan U132 Adapter Host Controller"

	It is safe to say M here.

	config USB_APPLEDISPLAY
	tristate "Apple Cinema Display support"
	select BACKLIGHT_LCD_SUPPORT
	select BACKLIGHT_CLASS_DEVICE
	help
	Say Y here if you want to control the backlight of Apple Cinema
	Displays over USB. This driver provides a sysfs interface.

	source "drivers/usb/misc/sisusbvga/Kconfig"

	config USB_LD
	tristate "USB LD driver"
	help
	This driver is for generic USB devices that use interrupt transfers,
	like LD Didactic's USB devices.

	To compile this driver as a module, choose M here: the
	module will be called ldusb.

	config USB_TRANCEVIBRATOR
	tristate "PlayStation 2 Trance Vibrator driver support"
	help
	Say Y here if you want to connect a PlayStation 2 Trance Vibrator
	device to your computer's USB port.

	To compile this driver as a module, choose M here: the
	module will be called trancevibrator.

	config USB_IOWARRIOR
	tristate "IO Warrior driver support"
	help
	Say Y here if you want to support the IO Warrior devices from Code
	Mercenaries. This includes support for the following devices:
	IO Warrior 40
	IO Warrior 24
	IO Warrior 56
	IO Warrior 24 Power Vampire

	To compile this driver as a module, choose M here: the
	module will be called iowarrior.

	config USB_TEST
	tristate "USB testing driver"
	help
	This driver is for testing host controller software. It is used
	with specialized device firmware for regression and stress testing,
	to help prevent problems from cropping up with "real" drivers.

	See <http://www.linux-usb.org/usbtest/> for more information,
	including sample test device firmware and "how to use it".

	config USB_EHSET_TEST_FIXTURE
	tristate "USB EHSET Test Fixture driver"
	help
	Say Y here if you want to support the special test fixture device
	used for the USB-IF Embedded Host High-Speed Electrical Test procedure.

	When the test fixture is connected, it can enumerate as one of several
	VID/PID pairs. This driver then initiates a corresponding test mode on
	the downstream port to which the test fixture is attached.

	See <http://www.usb.org/developers/onthego/EHSET_v1.01.pdf> for more
	information.

	config USB_ISIGHTFW
	tristate "iSight firmware loading support"
	select FW_LOADER
	help
	This driver loads firmware for USB Apple iSight cameras, allowing
	them to be driven by the USB video class driver available at
	http://linux-uvc.berlios.de

	The firmware for this driver must be extracted from the MacOS
	driver beforehand. Tools for doing so are available at
	http://bersace03.free.fr

	config USB_YUREX
	tristate "USB YUREX driver support"
	help
	Say Y here if you want to connect a YUREX to your computer's
	USB port. The YUREX is a leg-shakes sensor. See
	<http://bbu.kayac.com/en/> for further information.
	This driver supports read/write of leg-shakes counter and
	fasync for the counter update via a device file /dev/yurex*.

	To compile this driver as a module, choose M here: the
	module will be called yurex.

	config USB_EZUSB_FX2
	tristate "Functions for loading firmware on EZUSB chips"
	help
	Say Y here if you need EZUSB device support.
	(Cypress FX/FX2/FX2LP microcontrollers)

	config USB_HSIC_USB3503
	tristate "USB3503 HSIC to USB20 Driver"
	depends on I2C
	select REGMAP_I2C
	help
	This option enables support for SMSC USB3503 HSIC to USB 2.0 Driver.

	config USB_HSIC_USB4604
	tristate "USB4604 HSIC to USB20 Driver"
	depends on I2C
	help
	This option enables support for SMSC USB4604 HSIC to USB 2.0 Driver.

	config USB_LINK_LAYER_TEST
	tristate "USB Link Layer Test driver"
	help
	This driver is for generating specific traffic for Super Speed Link
	Layer Test Device. Say Y only when you want to conduct USB Super Speed
	Link Layer Test for host controllers.

	config USB_CHAOSKEY
	tristate "ChaosKey random number generator driver support"
	depends on HW_RANDOM
	help
	Say Y here if you want to connect an AltusMetrum ChaosKey or
	Araneus Alea I to your computer's USB port. These devices
	are hardware random number generators which hook into the
	kernel entropy pool to ensure a large supply of entropy for
	/dev/random and /dev/urandom and also provides direct access
	via /dev/chaoskeyX

	To compile this driver as a module, choose M here: the
	module will be called chaoskey.

	config UCSI
	tristate "USB Type-C Connector System Software Interface driver"
	depends on ACPI
	help
	UCSI driver is meant to be used as a convenience tool for desktop and
	server systems that are not equipped to handle USB in device mode. It
	will always select USB host role for the USB Type-C ports on systems
	that provide UCSI interface.

	USB Type-C Connector System Software Interface (UCSI) is a
	specification for an interface that allows the Operating System to
	control the USB Type-C ports on a system. Things the need controlling
	include the USB Data Role (host or device), and when USB Power
	Delivery is supported, the Power Role (source or sink). With USB
	Type-C connectors, when two dual role capable devices are attached
	together, the data role is selected randomly. Therefore it is
	important to give the OS a way to select the role. Otherwise the user
	would have to unplug and replug in order in order to attempt to swap
	the data and power roles.

	The UCSI specification can be downloaded from:
	http://www.intel.com/content/www/us/en/io/universal-serial-bus/usb-type-c-ucsi-spec.html

	To compile the driver as a module, choose M here: the module will be
	called ucsi.