| Copyright (C) 2002-2010 Sentelic Corporation. | |
| Last update: Jan-13-2010 | |
| ============================================================================== | |
| * Finger Sensing Pad Intellimouse Mode(scrolling wheel, 4th and 5th buttons) | |
| ============================================================================== | |
| A) MSID 4: Scrolling wheel mode plus Forward page(4th button) and Backward | |
| page (5th button) | |
| @1. Set sample rate to 200; | |
| @2. Set sample rate to 200; | |
| @3. Set sample rate to 80; | |
| @4. Issuing the "Get device ID" command (0xF2) and waits for the response; | |
| @5. FSP will respond 0x04. | |
| Packet 1 | |
| Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 | |
| BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| | |
| 1 |Y|X|y|x|1|M|R|L| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 | | |B|F|W|W|W|W| | |
| |---------------| |---------------| |---------------| |---------------| | |
| Byte 1: Bit7 => Y overflow | |
| Bit6 => X overflow | |
| Bit5 => Y sign bit | |
| Bit4 => X sign bit | |
| Bit3 => 1 | |
| Bit2 => Middle Button, 1 is pressed, 0 is not pressed. | |
| Bit1 => Right Button, 1 is pressed, 0 is not pressed. | |
| Bit0 => Left Button, 1 is pressed, 0 is not pressed. | |
| Byte 2: X Movement(9-bit 2's complement integers) | |
| Byte 3: Y Movement(9-bit 2's complement integers) | |
| Byte 4: Bit3~Bit0 => the scrolling wheel's movement since the last data report. | |
| valid values, -8 ~ +7 | |
| Bit4 => 1 = 4th mouse button is pressed, Forward one page. | |
| 0 = 4th mouse button is not pressed. | |
| Bit5 => 1 = 5th mouse button is pressed, Backward one page. | |
| 0 = 5th mouse button is not pressed. | |
| B) MSID 6: Horizontal and Vertical scrolling. | |
| @ Set bit 1 in register 0x40 to 1 | |
| # FSP replaces scrolling wheel's movement as 4 bits to show horizontal and | |
| vertical scrolling. | |
| Packet 1 | |
| Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 | |
| BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| | |
| 1 |Y|X|y|x|1|M|R|L| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 | | |B|F|r|l|u|d| | |
| |---------------| |---------------| |---------------| |---------------| | |
| Byte 1: Bit7 => Y overflow | |
| Bit6 => X overflow | |
| Bit5 => Y sign bit | |
| Bit4 => X sign bit | |
| Bit3 => 1 | |
| Bit2 => Middle Button, 1 is pressed, 0 is not pressed. | |
| Bit1 => Right Button, 1 is pressed, 0 is not pressed. | |
| Bit0 => Left Button, 1 is pressed, 0 is not pressed. | |
| Byte 2: X Movement(9-bit 2's complement integers) | |
| Byte 3: Y Movement(9-bit 2's complement integers) | |
| Byte 4: Bit0 => the Vertical scrolling movement downward. | |
| Bit1 => the Vertical scrolling movement upward. | |
| Bit2 => the Horizontal scrolling movement leftward. | |
| Bit3 => the Horizontal scrolling movement rightward. | |
| Bit4 => 1 = 4th mouse button is pressed, Forward one page. | |
| 0 = 4th mouse button is not pressed. | |
| Bit5 => 1 = 5th mouse button is pressed, Backward one page. | |
| 0 = 5th mouse button is not pressed. | |
| C) MSID 7: | |
| # FSP uses 2 packets (8 Bytes) to represent Absolute Position. | |
| so we have PACKET NUMBER to identify packets. | |
| If PACKET NUMBER is 0, the packet is Packet 1. | |
| If PACKET NUMBER is 1, the packet is Packet 2. | |
| Please count this number in program. | |
| # MSID6 special packet will be enable at the same time when enable MSID 7. | |
| ============================================================================== | |
| * Absolute position for STL3886-G0. | |
| ============================================================================== | |
| @ Set bit 2 or 3 in register 0x40 to 1 | |
| @ Set bit 6 in register 0x40 to 1 | |
| Packet 1 (ABSOLUTE POSITION) | |
| Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 | |
| BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| | |
| 1 |0|1|V|1|1|M|R|L| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 |r|l|d|u|X|X|Y|Y| | |
| |---------------| |---------------| |---------------| |---------------| | |
| Byte 1: Bit7~Bit6 => 00, Normal data packet | |
| => 01, Absolute coordination packet | |
| => 10, Notify packet | |
| Bit5 => valid bit | |
| Bit4 => 1 | |
| Bit3 => 1 | |
| Bit2 => Middle Button, 1 is pressed, 0 is not pressed. | |
| Bit1 => Right Button, 1 is pressed, 0 is not pressed. | |
| Bit0 => Left Button, 1 is pressed, 0 is not pressed. | |
| Byte 2: X coordinate (xpos[9:2]) | |
| Byte 3: Y coordinate (ypos[9:2]) | |
| Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0]) | |
| Bit3~Bit2 => X coordinate (ypos[1:0]) | |
| Bit4 => scroll up | |
| Bit5 => scroll down | |
| Bit6 => scroll left | |
| Bit7 => scroll right | |
| Notify Packet for G0 | |
| Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 | |
| BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| | |
| 1 |1|0|0|1|1|M|R|L| 2 |C|C|C|C|C|C|C|C| 3 |M|M|M|M|M|M|M|M| 4 |0|0|0|0|0|0|0|0| | |
| |---------------| |---------------| |---------------| |---------------| | |
| Byte 1: Bit7~Bit6 => 00, Normal data packet | |
| => 01, Absolute coordination packet | |
| => 10, Notify packet | |
| Bit5 => 0 | |
| Bit4 => 1 | |
| Bit3 => 1 | |
| Bit2 => Middle Button, 1 is pressed, 0 is not pressed. | |
| Bit1 => Right Button, 1 is pressed, 0 is not pressed. | |
| Bit0 => Left Button, 1 is pressed, 0 is not pressed. | |
| Byte 2: Message Type => 0x5A (Enable/Disable status packet) | |
| Mode Type => 0xA5 (Normal/Icon mode status) | |
| Byte 3: Message Type => 0x00 (Disabled) | |
| => 0x01 (Enabled) | |
| Mode Type => 0x00 (Normal) | |
| => 0x01 (Icon) | |
| Byte 4: Bit7~Bit0 => Don't Care | |
| ============================================================================== | |
| * Absolute position for STL3888-Ax. | |
| ============================================================================== | |
| Packet 1 (ABSOLUTE POSITION) | |
| Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 | |
| BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| | |
| 1 |0|1|V|A|1|L|0|1| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 |x|x|y|y|X|X|Y|Y| | |
| |---------------| |---------------| |---------------| |---------------| | |
| Byte 1: Bit7~Bit6 => 00, Normal data packet | |
| => 01, Absolute coordination packet | |
| => 10, Notify packet | |
| Bit5 => Valid bit, 0 means that the coordinate is invalid or finger up. | |
| When both fingers are up, the last two reports have zero valid | |
| bit. | |
| Bit4 => arc | |
| Bit3 => 1 | |
| Bit2 => Left Button, 1 is pressed, 0 is released. | |
| Bit1 => 0 | |
| Bit0 => 1 | |
| Byte 2: X coordinate (xpos[9:2]) | |
| Byte 3: Y coordinate (ypos[9:2]) | |
| Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0]) | |
| Bit3~Bit2 => X coordinate (ypos[1:0]) | |
| Bit5~Bit4 => y1_g | |
| Bit7~Bit6 => x1_g | |
| Packet 2 (ABSOLUTE POSITION) | |
| Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 | |
| BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| | |
| 1 |0|1|V|A|1|R|1|0| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 |x|x|y|y|X|X|Y|Y| | |
| |---------------| |---------------| |---------------| |---------------| | |
| Byte 1: Bit7~Bit6 => 00, Normal data packet | |
| => 01, Absolute coordinates packet | |
| => 10, Notify packet | |
| Bit5 => Valid bit, 0 means that the coordinate is invalid or finger up. | |
| When both fingers are up, the last two reports have zero valid | |
| bit. | |
| Bit4 => arc | |
| Bit3 => 1 | |
| Bit2 => Right Button, 1 is pressed, 0 is released. | |
| Bit1 => 1 | |
| Bit0 => 0 | |
| Byte 2: X coordinate (xpos[9:2]) | |
| Byte 3: Y coordinate (ypos[9:2]) | |
| Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0]) | |
| Bit3~Bit2 => X coordinate (ypos[1:0]) | |
| Bit5~Bit4 => y2_g | |
| Bit7~Bit6 => x2_g | |
| Notify Packet for STL3888-Ax | |
| Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 | |
| BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| | |
| 1 |1|0|1|P|1|M|R|L| 2 |C|C|C|C|C|C|C|C| 3 |0|0|F|F|0|0|0|i| 4 |r|l|d|u|0|0|0|0| | |
| |---------------| |---------------| |---------------| |---------------| | |
| Byte 1: Bit7~Bit6 => 00, Normal data packet | |
| => 01, Absolute coordinates packet | |
| => 10, Notify packet | |
| Bit5 => 1 | |
| Bit4 => when in absolute coordinates mode (valid when EN_PKT_GO is 1): | |
| 0: left button is generated by the on-pad command | |
| 1: left button is generated by the external button | |
| Bit3 => 1 | |
| Bit2 => Middle Button, 1 is pressed, 0 is not pressed. | |
| Bit1 => Right Button, 1 is pressed, 0 is not pressed. | |
| Bit0 => Left Button, 1 is pressed, 0 is not pressed. | |
| Byte 2: Message Type => 0xB7 (Multi Finger, Multi Coordinate mode) | |
| Byte 3: Bit7~Bit6 => Don't care | |
| Bit5~Bit4 => Number of fingers | |
| Bit3~Bit1 => Reserved | |
| Bit0 => 1: enter gesture mode; 0: leaving gesture mode | |
| Byte 4: Bit7 => scroll right button | |
| Bit6 => scroll left button | |
| Bit5 => scroll down button | |
| Bit4 => scroll up button | |
| * Note that if gesture and additional buttoni (Bit4~Bit7) | |
| happen at the same time, the button information will not | |
| be sent. | |
| Bit3~Bit0 => Reserved | |
| Sample sequence of Multi-finger, Multi-coordinate mode: | |
| notify packet (valid bit == 1), abs pkt 1, abs pkt 2, abs pkt 1, | |
| abs pkt 2, ..., notify packet (valid bit == 0) | |
| ============================================================================== | |
| * Absolute position for STL3888-B0. | |
| ============================================================================== | |
| Packet 1(ABSOLUTE POSITION) | |
| Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 | |
| BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| | |
| 1 |0|1|V|F|1|0|R|L| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 |r|l|u|d|X|X|Y|Y| | |
| |---------------| |---------------| |---------------| |---------------| | |
| Byte 1: Bit7~Bit6 => 00, Normal data packet | |
| => 01, Absolute coordinates packet | |
| => 10, Notify packet | |
| Bit5 => Valid bit, 0 means that the coordinate is invalid or finger up. | |
| When both fingers are up, the last two reports have zero valid | |
| bit. | |
| Bit4 => finger up/down information. 1: finger down, 0: finger up. | |
| Bit3 => 1 | |
| Bit2 => finger index, 0 is the first finger, 1 is the second finger. | |
| Bit1 => Right Button, 1 is pressed, 0 is not pressed. | |
| Bit0 => Left Button, 1 is pressed, 0 is not pressed. | |
| Byte 2: X coordinate (xpos[9:2]) | |
| Byte 3: Y coordinate (ypos[9:2]) | |
| Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0]) | |
| Bit3~Bit2 => X coordinate (ypos[1:0]) | |
| Bit4 => scroll down button | |
| Bit5 => scroll up button | |
| Bit6 => scroll left button | |
| Bit7 => scroll right button | |
| Packet 2 (ABSOLUTE POSITION) | |
| Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 | |
| BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| | |
| 1 |0|1|V|F|1|1|R|L| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 |r|l|u|d|X|X|Y|Y| | |
| |---------------| |---------------| |---------------| |---------------| | |
| Byte 1: Bit7~Bit6 => 00, Normal data packet | |
| => 01, Absolute coordination packet | |
| => 10, Notify packet | |
| Bit5 => Valid bit, 0 means that the coordinate is invalid or finger up. | |
| When both fingers are up, the last two reports have zero valid | |
| bit. | |
| Bit4 => finger up/down information. 1: finger down, 0: finger up. | |
| Bit3 => 1 | |
| Bit2 => finger index, 0 is the first finger, 1 is the second finger. | |
| Bit1 => Right Button, 1 is pressed, 0 is not pressed. | |
| Bit0 => Left Button, 1 is pressed, 0 is not pressed. | |
| Byte 2: X coordinate (xpos[9:2]) | |
| Byte 3: Y coordinate (ypos[9:2]) | |
| Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0]) | |
| Bit3~Bit2 => X coordinate (ypos[1:0]) | |
| Bit4 => scroll down button | |
| Bit5 => scroll up button | |
| Bit6 => scroll left button | |
| Bit7 => scroll right button | |
| Notify Packet for STL3888-B0 | |
| Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 | |
| BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| | |
| 1 |1|0|1|P|1|M|R|L| 2 |C|C|C|C|C|C|C|C| 3 |0|0|F|F|0|0|0|i| 4 |r|l|u|d|0|0|0|0| | |
| |---------------| |---------------| |---------------| |---------------| | |
| Byte 1: Bit7~Bit6 => 00, Normal data packet | |
| => 01, Absolute coordination packet | |
| => 10, Notify packet | |
| Bit5 => 1 | |
| Bit4 => when in absolute coordinate mode (valid when EN_PKT_GO is 1): | |
| 0: left button is generated by the on-pad command | |
| 1: left button is generated by the external button | |
| Bit3 => 1 | |
| Bit2 => Middle Button, 1 is pressed, 0 is not pressed. | |
| Bit1 => Right Button, 1 is pressed, 0 is not pressed. | |
| Bit0 => Left Button, 1 is pressed, 0 is not pressed. | |
| Byte 2: Message Type => 0xB7 (Multi Finger, Multi Coordinate mode) | |
| Byte 3: Bit7~Bit6 => Don't care | |
| Bit5~Bit4 => Number of fingers | |
| Bit3~Bit1 => Reserved | |
| Bit0 => 1: enter gesture mode; 0: leaving gesture mode | |
| Byte 4: Bit7 => scroll right button | |
| Bit6 => scroll left button | |
| Bit5 => scroll up button | |
| Bit4 => scroll down button | |
| * Note that if gesture and additional button(Bit4~Bit7) | |
| happen at the same time, the button information will not | |
| be sent. | |
| Bit3~Bit0 => Reserved | |
| Sample sequence of Multi-finger, Multi-coordinate mode: | |
| notify packet (valid bit == 1), abs pkt 1, abs pkt 2, abs pkt 1, | |
| abs pkt 2, ..., notify packet (valid bit == 0) | |
| ============================================================================== | |
| * FSP Enable/Disable packet | |
| ============================================================================== | |
| Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 | |
| BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| | |
| 1 |Y|X|0|0|1|M|R|L| 2 |0|1|0|1|1|0|1|E| 3 | | | | | | | | | 4 | | | | | | | | | | |
| |---------------| |---------------| |---------------| |---------------| | |
| FSP will send out enable/disable packet when FSP receive PS/2 enable/disable | |
| command. Host will receive the packet which Middle, Right, Left button will | |
| be set. The packet only use byte 0 and byte 1 as a pattern of original packet. | |
| Ignore the other bytes of the packet. | |
| Byte 1: Bit7 => 0, Y overflow | |
| Bit6 => 0, X overflow | |
| Bit5 => 0, Y sign bit | |
| Bit4 => 0, X sign bit | |
| Bit3 => 1 | |
| Bit2 => 1, Middle Button | |
| Bit1 => 1, Right Button | |
| Bit0 => 1, Left Button | |
| Byte 2: Bit7~1 => (0101101b) | |
| Bit0 => 1 = Enable | |
| 0 = Disable | |
| Byte 3: Don't care | |
| Byte 4: Don't care (MOUSE ID 3, 4) | |
| Byte 5~8: Don't care (Absolute packet) | |
| ============================================================================== | |
| * PS/2 Command Set | |
| ============================================================================== | |
| FSP supports basic PS/2 commanding set and modes, refer to following URL for | |
| details about PS/2 commands: | |
| http://www.computer-engineering.org/ps2mouse/ | |
| ============================================================================== | |
| * Programming Sequence for Determining Packet Parsing Flow | |
| ============================================================================== | |
| 1. Identify FSP by reading device ID(0x00) and version(0x01) register | |
| 2. Determine number of buttons by reading status2 (0x0b) register | |
| buttons = reg[0x0b] & 0x30 | |
| if buttons == 0x30 or buttons == 0x20: | |
| # two/four buttons | |
| Refer to 'Finger Sensing Pad PS/2 Mouse Intellimouse' | |
| section A for packet parsing detail(ignore byte 4, bit ~ 7) | |
| elif buttons == 0x10: | |
| # 6 buttons | |
| Refer to 'Finger Sensing Pad PS/2 Mouse Intellimouse' | |
| section B for packet parsing detail | |
| elif buttons == 0x00: | |
| # 6 buttons | |
| Refer to 'Finger Sensing Pad PS/2 Mouse Intellimouse' | |
| section A for packet parsing detail | |
| ============================================================================== | |
| * Programming Sequence for Register Reading/Writing | |
| ============================================================================== | |
| Register inversion requirement: | |
| Following values needed to be inverted(the '~' operator in C) before being | |
| sent to FSP: | |
| 0xe9, 0xee, 0xf2 and 0xff. | |
| Register swapping requirement: | |
| Following values needed to have their higher 4 bits and lower 4 bits being | |
| swapped before being sent to FSP: | |
| 10, 20, 40, 60, 80, 100 and 200. | |
| Register reading sequence: | |
| 1. send 0xf3 PS/2 command to FSP; | |
| 2. send 0x66 PS/2 command to FSP; | |
| 3. send 0x88 PS/2 command to FSP; | |
| 4. send 0xf3 PS/2 command to FSP; | |
| 5. if the register address being to read is not required to be | |
| inverted(refer to the 'Register inversion requirement' section), | |
| goto step 6 | |
| 5a. send 0x68 PS/2 command to FSP; | |
| 5b. send the inverted register address to FSP and goto step 8; | |
| 6. if the register address being to read is not required to be | |
| swapped(refer to the 'Register swapping requirement' section), | |
| goto step 7 | |
| 6a. send 0xcc PS/2 command to FSP; | |
| 6b. send the swapped register address to FSP and goto step 8; | |
| 7. send 0x66 PS/2 command to FSP; | |
| 7a. send the original register address to FSP and goto step 8; | |
| 8. send 0xe9(status request) PS/2 command to FSP; | |
| 9. the response read from FSP should be the requested register value. | |
| Register writing sequence: | |
| 1. send 0xf3 PS/2 command to FSP; | |
| 2. if the register address being to write is not required to be | |
| inverted(refer to the 'Register inversion requirement' section), | |
| goto step 3 | |
| 2a. send 0x74 PS/2 command to FSP; | |
| 2b. send the inverted register address to FSP and goto step 5; | |
| 3. if the register address being to write is not required to be | |
| swapped(refer to the 'Register swapping requirement' section), | |
| goto step 4 | |
| 3a. send 0x77 PS/2 command to FSP; | |
| 3b. send the swapped register address to FSP and goto step 5; | |
| 4. send 0x55 PS/2 command to FSP; | |
| 4a. send the register address to FSP and goto step 5; | |
| 5. send 0xf3 PS/2 command to FSP; | |
| 6. if the register value being to write is not required to be | |
| inverted(refer to the 'Register inversion requirement' section), | |
| goto step 7 | |
| 6a. send 0x47 PS/2 command to FSP; | |
| 6b. send the inverted register value to FSP and goto step 9; | |
| 7. if the register value being to write is not required to be | |
| swapped(refer to the 'Register swapping requirement' section), | |
| goto step 8 | |
| 7a. send 0x44 PS/2 command to FSP; | |
| 7b. send the swapped register value to FSP and goto step 9; | |
| 8. send 0x33 PS/2 command to FSP; | |
| 8a. send the register value to FSP; | |
| 9. the register writing sequence is completed. | |
| ============================================================================== | |
| * Register Listing | |
| ============================================================================== | |
| offset width default r/w name | |
| 0x00 bit7~bit0 0x01 RO device ID | |
| 0x01 bit7~bit0 0xc0 RW version ID | |
| 0x02 bit7~bit0 0x01 RO vendor ID | |
| 0x03 bit7~bit0 0x01 RO product ID | |
| 0x04 bit3~bit0 0x01 RW revision ID | |
| 0x0b RO test mode status 1 | |
| bit3 1 RO 0: rotate 180 degree, 1: no rotation | |
| bit5~bit4 RO number of buttons | |
| 11 => 2, lbtn/rbtn | |
| 10 => 4, lbtn/rbtn/scru/scrd | |
| 01 => 6, lbtn/rbtn/scru/scrd/scrl/scrr | |
| 00 => 6, lbtn/rbtn/scru/scrd/fbtn/bbtn | |
| 0x0f RW register file page control | |
| bit0 0 RW 1 to enable page 1 register files | |
| 0x10 RW system control 1 | |
| bit0 1 RW Reserved, must be 1 | |
| bit1 0 RW Reserved, must be 0 | |
| bit4 1 RW Reserved, must be 0 | |
| bit5 0 RW register clock gating enable | |
| 0: read only, 1: read/write enable | |
| (Note that following registers does not require clock gating being | |
| enabled prior to write: 05 06 07 08 09 0c 0f 10 11 12 16 17 18 23 2e | |
| 40 41 42 43. In addition to that, this bit must be 1 when gesture | |
| mode is enabled) | |
| 0x31 RW on-pad command detection | |
| bit7 0 RW on-pad command left button down tag | |
| enable | |
| 0: disable, 1: enable | |
| 0x34 RW on-pad command control 5 | |
| bit4~bit0 0x05 RW XLO in 0s/4/1, so 03h = 0010.1b = 2.5 | |
| (Note that position unit is in 0.5 scanline) | |
| bit7 0 RW on-pad tap zone enable | |
| 0: disable, 1: enable | |
| 0x35 RW on-pad command control 6 | |
| bit4~bit0 0x1d RW XHI in 0s/4/1, so 19h = 1100.1b = 12.5 | |
| (Note that position unit is in 0.5 scanline) | |
| 0x36 RW on-pad command control 7 | |
| bit4~bit0 0x04 RW YLO in 0s/4/1, so 03h = 0010.1b = 2.5 | |
| (Note that position unit is in 0.5 scanline) | |
| 0x37 RW on-pad command control 8 | |
| bit4~bit0 0x13 RW YHI in 0s/4/1, so 11h = 1000.1b = 8.5 | |
| (Note that position unit is in 0.5 scanline) | |
| 0x40 RW system control 5 | |
| bit1 0 RW FSP Intellimouse mode enable | |
| 0: disable, 1: enable | |
| bit2 0 RW movement + abs. coordinate mode enable | |
| 0: disable, 1: enable | |
| (Note that this function has the functionality of bit 1 even when | |
| bit 1 is not set. However, the format is different from that of bit 1. | |
| In addition, when bit 1 and bit 2 are set at the same time, bit 2 will | |
| override bit 1.) | |
| bit3 0 RW abs. coordinate only mode enable | |
| 0: disable, 1: enable | |
| (Note that this function has the functionality of bit 1 even when | |
| bit 1 is not set. However, the format is different from that of bit 1. | |
| In addition, when bit 1, bit 2 and bit 3 are set at the same time, | |
| bit 3 will override bit 1 and 2.) | |
| bit5 0 RW auto switch enable | |
| 0: disable, 1: enable | |
| bit6 0 RW G0 abs. + notify packet format enable | |
| 0: disable, 1: enable | |
| (Note that the absolute/relative coordinate output still depends on | |
| bit 2 and 3. That is, if any of those bit is 1, host will receive | |
| absolute coordinates; otherwise, host only receives packets with | |
| relative coordinate.) | |
| bit7 0 RW EN_PS2_F2: PS/2 gesture mode 2nd | |
| finger packet enable | |
| 0: disable, 1: enable | |
| 0x43 RW on-pad control | |
| bit0 0 RW on-pad control enable | |
| 0: disable, 1: enable | |
| (Note that if this bit is cleared, bit 3/5 will be ineffective) | |
| bit3 0 RW on-pad fix vertical scrolling enable | |
| 0: disable, 1: enable | |
| bit5 0 RW on-pad fix horizontal scrolling enable | |
| 0: disable, 1: enable |