| /* | |
| * acpi_bus.c - ACPI Bus Driver ($Revision: 80 $) | |
| * | |
| * Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com> | |
| * | |
| * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or (at | |
| * your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, but | |
| * WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
| * General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License along | |
| * with this program; if not, write to the Free Software Foundation, Inc., | |
| * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. | |
| * | |
| * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/init.h> | |
| #include <linux/ioport.h> | |
| #include <linux/kernel.h> | |
| #include <linux/list.h> | |
| #include <linux/sched.h> | |
| #include <linux/pm.h> | |
| #include <linux/device.h> | |
| #include <linux/proc_fs.h> | |
| #include <linux/acpi.h> | |
| #include <linux/slab.h> | |
| #ifdef CONFIG_X86 | |
| #include <asm/mpspec.h> | |
| #endif | |
| #include <linux/pci.h> | |
| #include <acpi/acpi_bus.h> | |
| #include <acpi/acpi_drivers.h> | |
| #include <linux/dmi.h> | |
| #include <linux/suspend.h> | |
| #include "internal.h" | |
| #define _COMPONENT ACPI_BUS_COMPONENT | |
| ACPI_MODULE_NAME("bus"); | |
| struct acpi_device *acpi_root; | |
| struct proc_dir_entry *acpi_root_dir; | |
| EXPORT_SYMBOL(acpi_root_dir); | |
| #define STRUCT_TO_INT(s) (*((int*)&s)) | |
| #ifdef CONFIG_X86 | |
| static int set_copy_dsdt(const struct dmi_system_id *id) | |
| { | |
| printk(KERN_NOTICE "%s detected - " | |
| "force copy of DSDT to local memory\n", id->ident); | |
| acpi_gbl_copy_dsdt_locally = 1; | |
| return 0; | |
| } | |
| static struct dmi_system_id dsdt_dmi_table[] __initdata = { | |
| /* | |
| * Invoke DSDT corruption work-around on all Toshiba Satellite. | |
| * https://bugzilla.kernel.org/show_bug.cgi?id=14679 | |
| */ | |
| { | |
| .callback = set_copy_dsdt, | |
| .ident = "TOSHIBA Satellite", | |
| .matches = { | |
| DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), | |
| DMI_MATCH(DMI_PRODUCT_NAME, "Satellite"), | |
| }, | |
| }, | |
| {} | |
| }; | |
| #else | |
| static struct dmi_system_id dsdt_dmi_table[] __initdata = { | |
| {} | |
| }; | |
| #endif | |
| /* -------------------------------------------------------------------------- | |
| Device Management | |
| -------------------------------------------------------------------------- */ | |
| int acpi_bus_get_device(acpi_handle handle, struct acpi_device **device) | |
| { | |
| acpi_status status = AE_OK; | |
| if (!device) | |
| return -EINVAL; | |
| /* TBD: Support fixed-feature devices */ | |
| status = acpi_get_data(handle, acpi_bus_data_handler, (void **)device); | |
| if (ACPI_FAILURE(status) || !*device) { | |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No context for object [%p]\n", | |
| handle)); | |
| return -ENODEV; | |
| } | |
| return 0; | |
| } | |
| EXPORT_SYMBOL(acpi_bus_get_device); | |
| acpi_status acpi_bus_get_status_handle(acpi_handle handle, | |
| unsigned long long *sta) | |
| { | |
| acpi_status status; | |
| status = acpi_evaluate_integer(handle, "_STA", NULL, sta); | |
| if (ACPI_SUCCESS(status)) | |
| return AE_OK; | |
| if (status == AE_NOT_FOUND) { | |
| *sta = ACPI_STA_DEVICE_PRESENT | ACPI_STA_DEVICE_ENABLED | | |
| ACPI_STA_DEVICE_UI | ACPI_STA_DEVICE_FUNCTIONING; | |
| return AE_OK; | |
| } | |
| return status; | |
| } | |
| int acpi_bus_get_status(struct acpi_device *device) | |
| { | |
| acpi_status status; | |
| unsigned long long sta; | |
| status = acpi_bus_get_status_handle(device->handle, &sta); | |
| if (ACPI_FAILURE(status)) | |
| return -ENODEV; | |
| STRUCT_TO_INT(device->status) = (int) sta; | |
| if (device->status.functional && !device->status.present) { | |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device [%s] status [%08x]: " | |
| "functional but not present;\n", | |
| device->pnp.bus_id, | |
| (u32) STRUCT_TO_INT(device->status))); | |
| } | |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device [%s] status [%08x]\n", | |
| device->pnp.bus_id, | |
| (u32) STRUCT_TO_INT(device->status))); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL(acpi_bus_get_status); | |
| void acpi_bus_private_data_handler(acpi_handle handle, | |
| void *context) | |
| { | |
| return; | |
| } | |
| EXPORT_SYMBOL(acpi_bus_private_data_handler); | |
| int acpi_bus_get_private_data(acpi_handle handle, void **data) | |
| { | |
| acpi_status status = AE_OK; | |
| if (!*data) | |
| return -EINVAL; | |
| status = acpi_get_data(handle, acpi_bus_private_data_handler, data); | |
| if (ACPI_FAILURE(status) || !*data) { | |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No context for object [%p]\n", | |
| handle)); | |
| return -ENODEV; | |
| } | |
| return 0; | |
| } | |
| EXPORT_SYMBOL(acpi_bus_get_private_data); | |
| /* -------------------------------------------------------------------------- | |
| Power Management | |
| -------------------------------------------------------------------------- */ | |
| static int __acpi_bus_get_power(struct acpi_device *device, int *state) | |
| { | |
| int result = 0; | |
| acpi_status status = 0; | |
| unsigned long long psc = 0; | |
| if (!device || !state) | |
| return -EINVAL; | |
| *state = ACPI_STATE_UNKNOWN; | |
| if (device->flags.power_manageable) { | |
| /* | |
| * Get the device's power state either directly (via _PSC) or | |
| * indirectly (via power resources). | |
| */ | |
| if (device->power.flags.power_resources) { | |
| result = acpi_power_get_inferred_state(device, state); | |
| if (result) | |
| return result; | |
| } else if (device->power.flags.explicit_get) { | |
| status = acpi_evaluate_integer(device->handle, "_PSC", | |
| NULL, &psc); | |
| if (ACPI_FAILURE(status)) | |
| return -ENODEV; | |
| *state = (int)psc; | |
| } | |
| } else { | |
| /* TBD: Non-recursive algorithm for walking up hierarchy. */ | |
| *state = device->parent ? | |
| device->parent->power.state : ACPI_STATE_D0; | |
| } | |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device [%s] power state is D%d\n", | |
| device->pnp.bus_id, *state)); | |
| return 0; | |
| } | |
| static int __acpi_bus_set_power(struct acpi_device *device, int state) | |
| { | |
| int result = 0; | |
| acpi_status status = AE_OK; | |
| char object_name[5] = { '_', 'P', 'S', '0' + state, '\0' }; | |
| if (!device || (state < ACPI_STATE_D0) || (state > ACPI_STATE_D3_COLD)) | |
| return -EINVAL; | |
| /* Make sure this is a valid target state */ | |
| if (state == device->power.state) { | |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device is already at D%d\n", | |
| state)); | |
| return 0; | |
| } | |
| if (!device->power.states[state].flags.valid) { | |
| printk(KERN_WARNING PREFIX "Device does not support D%d\n", state); | |
| return -ENODEV; | |
| } | |
| if (device->parent && (state < device->parent->power.state)) { | |
| printk(KERN_WARNING PREFIX | |
| "Cannot set device to a higher-powered" | |
| " state than parent\n"); | |
| return -ENODEV; | |
| } | |
| /* | |
| * Transition Power | |
| * ---------------- | |
| * On transitions to a high-powered state we first apply power (via | |
| * power resources) then evalute _PSx. Conversly for transitions to | |
| * a lower-powered state. | |
| */ | |
| if (state < device->power.state) { | |
| if (device->power.flags.power_resources) { | |
| result = acpi_power_transition(device, state); | |
| if (result) | |
| goto end; | |
| } | |
| if (device->power.states[state].flags.explicit_set) { | |
| status = acpi_evaluate_object(device->handle, | |
| object_name, NULL, NULL); | |
| if (ACPI_FAILURE(status)) { | |
| result = -ENODEV; | |
| goto end; | |
| } | |
| } | |
| } else { | |
| if (device->power.states[state].flags.explicit_set) { | |
| status = acpi_evaluate_object(device->handle, | |
| object_name, NULL, NULL); | |
| if (ACPI_FAILURE(status)) { | |
| result = -ENODEV; | |
| goto end; | |
| } | |
| } | |
| if (device->power.flags.power_resources) { | |
| result = acpi_power_transition(device, state); | |
| if (result) | |
| goto end; | |
| } | |
| } | |
| end: | |
| if (result) | |
| printk(KERN_WARNING PREFIX | |
| "Device [%s] failed to transition to D%d\n", | |
| device->pnp.bus_id, state); | |
| else { | |
| device->power.state = state; | |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, | |
| "Device [%s] transitioned to D%d\n", | |
| device->pnp.bus_id, state)); | |
| } | |
| return result; | |
| } | |
| int acpi_bus_set_power(acpi_handle handle, int state) | |
| { | |
| struct acpi_device *device; | |
| int result; | |
| result = acpi_bus_get_device(handle, &device); | |
| if (result) | |
| return result; | |
| if (!device->flags.power_manageable) { | |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, | |
| "Device [%s] is not power manageable\n", | |
| dev_name(&device->dev))); | |
| return -ENODEV; | |
| } | |
| return __acpi_bus_set_power(device, state); | |
| } | |
| EXPORT_SYMBOL(acpi_bus_set_power); | |
| int acpi_bus_init_power(struct acpi_device *device) | |
| { | |
| int state; | |
| int result; | |
| if (!device) | |
| return -EINVAL; | |
| device->power.state = ACPI_STATE_UNKNOWN; | |
| result = __acpi_bus_get_power(device, &state); | |
| if (result) | |
| return result; | |
| if (device->power.flags.power_resources) | |
| result = acpi_power_on_resources(device, state); | |
| if (!result) | |
| device->power.state = state; | |
| return result; | |
| } | |
| int acpi_bus_update_power(acpi_handle handle, int *state_p) | |
| { | |
| struct acpi_device *device; | |
| int state; | |
| int result; | |
| result = acpi_bus_get_device(handle, &device); | |
| if (result) | |
| return result; | |
| result = __acpi_bus_get_power(device, &state); | |
| if (result) | |
| return result; | |
| result = __acpi_bus_set_power(device, state); | |
| if (!result && state_p) | |
| *state_p = state; | |
| return result; | |
| } | |
| EXPORT_SYMBOL_GPL(acpi_bus_update_power); | |
| bool acpi_bus_power_manageable(acpi_handle handle) | |
| { | |
| struct acpi_device *device; | |
| int result; | |
| result = acpi_bus_get_device(handle, &device); | |
| return result ? false : device->flags.power_manageable; | |
| } | |
| EXPORT_SYMBOL(acpi_bus_power_manageable); | |
| bool acpi_bus_can_wakeup(acpi_handle handle) | |
| { | |
| struct acpi_device *device; | |
| int result; | |
| result = acpi_bus_get_device(handle, &device); | |
| return result ? false : device->wakeup.flags.valid; | |
| } | |
| EXPORT_SYMBOL(acpi_bus_can_wakeup); | |
| static void acpi_print_osc_error(acpi_handle handle, | |
| struct acpi_osc_context *context, char *error) | |
| { | |
| struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER}; | |
| int i; | |
| if (ACPI_FAILURE(acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer))) | |
| printk(KERN_DEBUG "%s\n", error); | |
| else { | |
| printk(KERN_DEBUG "%s:%s\n", (char *)buffer.pointer, error); | |
| kfree(buffer.pointer); | |
| } | |
| printk(KERN_DEBUG"_OSC request data:"); | |
| for (i = 0; i < context->cap.length; i += sizeof(u32)) | |
| printk("%x ", *((u32 *)(context->cap.pointer + i))); | |
| printk("\n"); | |
| } | |
| static acpi_status acpi_str_to_uuid(char *str, u8 *uuid) | |
| { | |
| int i; | |
| static int opc_map_to_uuid[16] = {6, 4, 2, 0, 11, 9, 16, 14, 19, 21, | |
| 24, 26, 28, 30, 32, 34}; | |
| if (strlen(str) != 36) | |
| return AE_BAD_PARAMETER; | |
| for (i = 0; i < 36; i++) { | |
| if (i == 8 || i == 13 || i == 18 || i == 23) { | |
| if (str[i] != '-') | |
| return AE_BAD_PARAMETER; | |
| } else if (!isxdigit(str[i])) | |
| return AE_BAD_PARAMETER; | |
| } | |
| for (i = 0; i < 16; i++) { | |
| uuid[i] = hex_to_bin(str[opc_map_to_uuid[i]]) << 4; | |
| uuid[i] |= hex_to_bin(str[opc_map_to_uuid[i] + 1]); | |
| } | |
| return AE_OK; | |
| } | |
| acpi_status acpi_run_osc(acpi_handle handle, struct acpi_osc_context *context) | |
| { | |
| acpi_status status; | |
| struct acpi_object_list input; | |
| union acpi_object in_params[4]; | |
| union acpi_object *out_obj; | |
| u8 uuid[16]; | |
| u32 errors; | |
| struct acpi_buffer output = {ACPI_ALLOCATE_BUFFER, NULL}; | |
| if (!context) | |
| return AE_ERROR; | |
| if (ACPI_FAILURE(acpi_str_to_uuid(context->uuid_str, uuid))) | |
| return AE_ERROR; | |
| context->ret.length = ACPI_ALLOCATE_BUFFER; | |
| context->ret.pointer = NULL; | |
| /* Setting up input parameters */ | |
| input.count = 4; | |
| input.pointer = in_params; | |
| in_params[0].type = ACPI_TYPE_BUFFER; | |
| in_params[0].buffer.length = 16; | |
| in_params[0].buffer.pointer = uuid; | |
| in_params[1].type = ACPI_TYPE_INTEGER; | |
| in_params[1].integer.value = context->rev; | |
| in_params[2].type = ACPI_TYPE_INTEGER; | |
| in_params[2].integer.value = context->cap.length/sizeof(u32); | |
| in_params[3].type = ACPI_TYPE_BUFFER; | |
| in_params[3].buffer.length = context->cap.length; | |
| in_params[3].buffer.pointer = context->cap.pointer; | |
| status = acpi_evaluate_object(handle, "_OSC", &input, &output); | |
| if (ACPI_FAILURE(status)) | |
| return status; | |
| if (!output.length) | |
| return AE_NULL_OBJECT; | |
| out_obj = output.pointer; | |
| if (out_obj->type != ACPI_TYPE_BUFFER | |
| || out_obj->buffer.length != context->cap.length) { | |
| acpi_print_osc_error(handle, context, | |
| "_OSC evaluation returned wrong type"); | |
| status = AE_TYPE; | |
| goto out_kfree; | |
| } | |
| /* Need to ignore the bit0 in result code */ | |
| errors = *((u32 *)out_obj->buffer.pointer) & ~(1 << 0); | |
| if (errors) { | |
| if (errors & OSC_REQUEST_ERROR) | |
| acpi_print_osc_error(handle, context, | |
| "_OSC request failed"); | |
| if (errors & OSC_INVALID_UUID_ERROR) | |
| acpi_print_osc_error(handle, context, | |
| "_OSC invalid UUID"); | |
| if (errors & OSC_INVALID_REVISION_ERROR) | |
| acpi_print_osc_error(handle, context, | |
| "_OSC invalid revision"); | |
| if (errors & OSC_CAPABILITIES_MASK_ERROR) { | |
| if (((u32 *)context->cap.pointer)[OSC_QUERY_TYPE] | |
| & OSC_QUERY_ENABLE) | |
| goto out_success; | |
| status = AE_SUPPORT; | |
| goto out_kfree; | |
| } | |
| status = AE_ERROR; | |
| goto out_kfree; | |
| } | |
| out_success: | |
| context->ret.length = out_obj->buffer.length; | |
| context->ret.pointer = kmalloc(context->ret.length, GFP_KERNEL); | |
| if (!context->ret.pointer) { | |
| status = AE_NO_MEMORY; | |
| goto out_kfree; | |
| } | |
| memcpy(context->ret.pointer, out_obj->buffer.pointer, | |
| context->ret.length); | |
| status = AE_OK; | |
| out_kfree: | |
| kfree(output.pointer); | |
| if (status != AE_OK) | |
| context->ret.pointer = NULL; | |
| return status; | |
| } | |
| EXPORT_SYMBOL(acpi_run_osc); | |
| static u8 sb_uuid_str[] = "0811B06E-4A27-44F9-8D60-3CBBC22E7B48"; | |
| static void acpi_bus_osc_support(void) | |
| { | |
| u32 capbuf[2]; | |
| struct acpi_osc_context context = { | |
| .uuid_str = sb_uuid_str, | |
| .rev = 1, | |
| .cap.length = 8, | |
| .cap.pointer = capbuf, | |
| }; | |
| acpi_handle handle; | |
| capbuf[OSC_QUERY_TYPE] = OSC_QUERY_ENABLE; | |
| capbuf[OSC_SUPPORT_TYPE] = OSC_SB_PR3_SUPPORT; /* _PR3 is in use */ | |
| #if defined(CONFIG_ACPI_PROCESSOR_AGGREGATOR) ||\ | |
| defined(CONFIG_ACPI_PROCESSOR_AGGREGATOR_MODULE) | |
| capbuf[OSC_SUPPORT_TYPE] |= OSC_SB_PAD_SUPPORT; | |
| #endif | |
| #if defined(CONFIG_ACPI_PROCESSOR) || defined(CONFIG_ACPI_PROCESSOR_MODULE) | |
| capbuf[OSC_SUPPORT_TYPE] |= OSC_SB_PPC_OST_SUPPORT; | |
| #endif | |
| if (ACPI_FAILURE(acpi_get_handle(NULL, "\\_SB", &handle))) | |
| return; | |
| if (ACPI_SUCCESS(acpi_run_osc(handle, &context))) | |
| kfree(context.ret.pointer); | |
| /* do we need to check the returned cap? Sounds no */ | |
| } | |
| /* -------------------------------------------------------------------------- | |
| Event Management | |
| -------------------------------------------------------------------------- */ | |
| #ifdef CONFIG_ACPI_PROC_EVENT | |
| static DEFINE_SPINLOCK(acpi_bus_event_lock); | |
| LIST_HEAD(acpi_bus_event_list); | |
| DECLARE_WAIT_QUEUE_HEAD(acpi_bus_event_queue); | |
| extern int event_is_open; | |
| int acpi_bus_generate_proc_event4(const char *device_class, const char *bus_id, u8 type, int data) | |
| { | |
| struct acpi_bus_event *event; | |
| unsigned long flags = 0; | |
| /* drop event on the floor if no one's listening */ | |
| if (!event_is_open) | |
| return 0; | |
| event = kzalloc(sizeof(struct acpi_bus_event), GFP_ATOMIC); | |
| if (!event) | |
| return -ENOMEM; | |
| strcpy(event->device_class, device_class); | |
| strcpy(event->bus_id, bus_id); | |
| event->type = type; | |
| event->data = data; | |
| spin_lock_irqsave(&acpi_bus_event_lock, flags); | |
| list_add_tail(&event->node, &acpi_bus_event_list); | |
| spin_unlock_irqrestore(&acpi_bus_event_lock, flags); | |
| wake_up_interruptible(&acpi_bus_event_queue); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(acpi_bus_generate_proc_event4); | |
| int acpi_bus_generate_proc_event(struct acpi_device *device, u8 type, int data) | |
| { | |
| if (!device) | |
| return -EINVAL; | |
| return acpi_bus_generate_proc_event4(device->pnp.device_class, | |
| device->pnp.bus_id, type, data); | |
| } | |
| EXPORT_SYMBOL(acpi_bus_generate_proc_event); | |
| int acpi_bus_receive_event(struct acpi_bus_event *event) | |
| { | |
| unsigned long flags = 0; | |
| struct acpi_bus_event *entry = NULL; | |
| DECLARE_WAITQUEUE(wait, current); | |
| if (!event) | |
| return -EINVAL; | |
| if (list_empty(&acpi_bus_event_list)) { | |
| set_current_state(TASK_INTERRUPTIBLE); | |
| add_wait_queue(&acpi_bus_event_queue, &wait); | |
| if (list_empty(&acpi_bus_event_list)) | |
| schedule(); | |
| remove_wait_queue(&acpi_bus_event_queue, &wait); | |
| set_current_state(TASK_RUNNING); | |
| if (signal_pending(current)) | |
| return -ERESTARTSYS; | |
| } | |
| spin_lock_irqsave(&acpi_bus_event_lock, flags); | |
| if (!list_empty(&acpi_bus_event_list)) { | |
| entry = list_entry(acpi_bus_event_list.next, | |
| struct acpi_bus_event, node); | |
| list_del(&entry->node); | |
| } | |
| spin_unlock_irqrestore(&acpi_bus_event_lock, flags); | |
| if (!entry) | |
| return -ENODEV; | |
| memcpy(event, entry, sizeof(struct acpi_bus_event)); | |
| kfree(entry); | |
| return 0; | |
| } | |
| #endif /* CONFIG_ACPI_PROC_EVENT */ | |
| /* -------------------------------------------------------------------------- | |
| Notification Handling | |
| -------------------------------------------------------------------------- */ | |
| static void acpi_bus_check_device(acpi_handle handle) | |
| { | |
| struct acpi_device *device; | |
| acpi_status status; | |
| struct acpi_device_status old_status; | |
| if (acpi_bus_get_device(handle, &device)) | |
| return; | |
| if (!device) | |
| return; | |
| old_status = device->status; | |
| /* | |
| * Make sure this device's parent is present before we go about | |
| * messing with the device. | |
| */ | |
| if (device->parent && !device->parent->status.present) { | |
| device->status = device->parent->status; | |
| return; | |
| } | |
| status = acpi_bus_get_status(device); | |
| if (ACPI_FAILURE(status)) | |
| return; | |
| if (STRUCT_TO_INT(old_status) == STRUCT_TO_INT(device->status)) | |
| return; | |
| /* | |
| * Device Insertion/Removal | |
| */ | |
| if ((device->status.present) && !(old_status.present)) { | |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device insertion detected\n")); | |
| /* TBD: Handle device insertion */ | |
| } else if (!(device->status.present) && (old_status.present)) { | |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device removal detected\n")); | |
| /* TBD: Handle device removal */ | |
| } | |
| } | |
| static void acpi_bus_check_scope(acpi_handle handle) | |
| { | |
| /* Status Change? */ | |
| acpi_bus_check_device(handle); | |
| /* | |
| * TBD: Enumerate child devices within this device's scope and | |
| * run acpi_bus_check_device()'s on them. | |
| */ | |
| } | |
| static BLOCKING_NOTIFIER_HEAD(acpi_bus_notify_list); | |
| int register_acpi_bus_notifier(struct notifier_block *nb) | |
| { | |
| return blocking_notifier_chain_register(&acpi_bus_notify_list, nb); | |
| } | |
| EXPORT_SYMBOL_GPL(register_acpi_bus_notifier); | |
| void unregister_acpi_bus_notifier(struct notifier_block *nb) | |
| { | |
| blocking_notifier_chain_unregister(&acpi_bus_notify_list, nb); | |
| } | |
| EXPORT_SYMBOL_GPL(unregister_acpi_bus_notifier); | |
| /** | |
| * acpi_bus_notify | |
| * --------------- | |
| * Callback for all 'system-level' device notifications (values 0x00-0x7F). | |
| */ | |
| static void acpi_bus_notify(acpi_handle handle, u32 type, void *data) | |
| { | |
| struct acpi_device *device = NULL; | |
| struct acpi_driver *driver; | |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Notification %#02x to handle %p\n", | |
| type, handle)); | |
| blocking_notifier_call_chain(&acpi_bus_notify_list, | |
| type, (void *)handle); | |
| switch (type) { | |
| case ACPI_NOTIFY_BUS_CHECK: | |
| acpi_bus_check_scope(handle); | |
| /* | |
| * TBD: We'll need to outsource certain events to non-ACPI | |
| * drivers via the device manager (device.c). | |
| */ | |
| break; | |
| case ACPI_NOTIFY_DEVICE_CHECK: | |
| acpi_bus_check_device(handle); | |
| /* | |
| * TBD: We'll need to outsource certain events to non-ACPI | |
| * drivers via the device manager (device.c). | |
| */ | |
| break; | |
| case ACPI_NOTIFY_DEVICE_WAKE: | |
| /* TBD */ | |
| break; | |
| case ACPI_NOTIFY_EJECT_REQUEST: | |
| /* TBD */ | |
| break; | |
| case ACPI_NOTIFY_DEVICE_CHECK_LIGHT: | |
| /* TBD: Exactly what does 'light' mean? */ | |
| break; | |
| case ACPI_NOTIFY_FREQUENCY_MISMATCH: | |
| /* TBD */ | |
| break; | |
| case ACPI_NOTIFY_BUS_MODE_MISMATCH: | |
| /* TBD */ | |
| break; | |
| case ACPI_NOTIFY_POWER_FAULT: | |
| /* TBD */ | |
| break; | |
| default: | |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, | |
| "Received unknown/unsupported notification [%08x]\n", | |
| type)); | |
| break; | |
| } | |
| acpi_bus_get_device(handle, &device); | |
| if (device) { | |
| driver = device->driver; | |
| if (driver && driver->ops.notify && | |
| (driver->flags & ACPI_DRIVER_ALL_NOTIFY_EVENTS)) | |
| driver->ops.notify(device, type); | |
| } | |
| } | |
| /* -------------------------------------------------------------------------- | |
| Initialization/Cleanup | |
| -------------------------------------------------------------------------- */ | |
| static int __init acpi_bus_init_irq(void) | |
| { | |
| acpi_status status = AE_OK; | |
| union acpi_object arg = { ACPI_TYPE_INTEGER }; | |
| struct acpi_object_list arg_list = { 1, &arg }; | |
| char *message = NULL; | |
| /* | |
| * Let the system know what interrupt model we are using by | |
| * evaluating the \_PIC object, if exists. | |
| */ | |
| switch (acpi_irq_model) { | |
| case ACPI_IRQ_MODEL_PIC: | |
| message = "PIC"; | |
| break; | |
| case ACPI_IRQ_MODEL_IOAPIC: | |
| message = "IOAPIC"; | |
| break; | |
| case ACPI_IRQ_MODEL_IOSAPIC: | |
| message = "IOSAPIC"; | |
| break; | |
| case ACPI_IRQ_MODEL_PLATFORM: | |
| message = "platform specific model"; | |
| break; | |
| default: | |
| printk(KERN_WARNING PREFIX "Unknown interrupt routing model\n"); | |
| return -ENODEV; | |
| } | |
| printk(KERN_INFO PREFIX "Using %s for interrupt routing\n", message); | |
| arg.integer.value = acpi_irq_model; | |
| status = acpi_evaluate_object(NULL, "\\_PIC", &arg_list, NULL); | |
| if (ACPI_FAILURE(status) && (status != AE_NOT_FOUND)) { | |
| ACPI_EXCEPTION((AE_INFO, status, "Evaluating _PIC")); | |
| return -ENODEV; | |
| } | |
| return 0; | |
| } | |
| u8 acpi_gbl_permanent_mmap; | |
| void __init acpi_early_init(void) | |
| { | |
| acpi_status status = AE_OK; | |
| if (acpi_disabled) | |
| return; | |
| printk(KERN_INFO PREFIX "Core revision %08x\n", ACPI_CA_VERSION); | |
| /* enable workarounds, unless strict ACPI spec. compliance */ | |
| if (!acpi_strict) | |
| acpi_gbl_enable_interpreter_slack = TRUE; | |
| acpi_gbl_permanent_mmap = 1; | |
| /* | |
| * If the machine falls into the DMI check table, | |
| * DSDT will be copied to memory | |
| */ | |
| dmi_check_system(dsdt_dmi_table); | |
| status = acpi_reallocate_root_table(); | |
| if (ACPI_FAILURE(status)) { | |
| printk(KERN_ERR PREFIX | |
| "Unable to reallocate ACPI tables\n"); | |
| goto error0; | |
| } | |
| status = acpi_initialize_subsystem(); | |
| if (ACPI_FAILURE(status)) { | |
| printk(KERN_ERR PREFIX | |
| "Unable to initialize the ACPI Interpreter\n"); | |
| goto error0; | |
| } | |
| status = acpi_load_tables(); | |
| if (ACPI_FAILURE(status)) { | |
| printk(KERN_ERR PREFIX | |
| "Unable to load the System Description Tables\n"); | |
| goto error0; | |
| } | |
| #ifdef CONFIG_X86 | |
| if (!acpi_ioapic) { | |
| /* compatible (0) means level (3) */ | |
| if (!(acpi_sci_flags & ACPI_MADT_TRIGGER_MASK)) { | |
| acpi_sci_flags &= ~ACPI_MADT_TRIGGER_MASK; | |
| acpi_sci_flags |= ACPI_MADT_TRIGGER_LEVEL; | |
| } | |
| /* Set PIC-mode SCI trigger type */ | |
| acpi_pic_sci_set_trigger(acpi_gbl_FADT.sci_interrupt, | |
| (acpi_sci_flags & ACPI_MADT_TRIGGER_MASK) >> 2); | |
| } else { | |
| /* | |
| * now that acpi_gbl_FADT is initialized, | |
| * update it with result from INT_SRC_OVR parsing | |
| */ | |
| acpi_gbl_FADT.sci_interrupt = acpi_sci_override_gsi; | |
| } | |
| #endif | |
| status = | |
| acpi_enable_subsystem(~ | |
| (ACPI_NO_HARDWARE_INIT | | |
| ACPI_NO_ACPI_ENABLE)); | |
| if (ACPI_FAILURE(status)) { | |
| printk(KERN_ERR PREFIX "Unable to enable ACPI\n"); | |
| goto error0; | |
| } | |
| return; | |
| error0: | |
| disable_acpi(); | |
| return; | |
| } | |
| static int __init acpi_bus_init(void) | |
| { | |
| int result = 0; | |
| acpi_status status = AE_OK; | |
| extern acpi_status acpi_os_initialize1(void); | |
| acpi_os_initialize1(); | |
| status = | |
| acpi_enable_subsystem(ACPI_NO_HARDWARE_INIT | ACPI_NO_ACPI_ENABLE); | |
| if (ACPI_FAILURE(status)) { | |
| printk(KERN_ERR PREFIX | |
| "Unable to start the ACPI Interpreter\n"); | |
| goto error1; | |
| } | |
| /* | |
| * ACPI 2.0 requires the EC driver to be loaded and work before | |
| * the EC device is found in the namespace (i.e. before acpi_initialize_objects() | |
| * is called). | |
| * | |
| * This is accomplished by looking for the ECDT table, and getting | |
| * the EC parameters out of that. | |
| */ | |
| status = acpi_ec_ecdt_probe(); | |
| /* Ignore result. Not having an ECDT is not fatal. */ | |
| status = acpi_initialize_objects(ACPI_FULL_INITIALIZATION); | |
| if (ACPI_FAILURE(status)) { | |
| printk(KERN_ERR PREFIX "Unable to initialize ACPI objects\n"); | |
| goto error1; | |
| } | |
| /* | |
| * _OSC method may exist in module level code, | |
| * so it must be run after ACPI_FULL_INITIALIZATION | |
| */ | |
| acpi_bus_osc_support(); | |
| /* | |
| * _PDC control method may load dynamic SSDT tables, | |
| * and we need to install the table handler before that. | |
| */ | |
| acpi_sysfs_init(); | |
| acpi_early_processor_set_pdc(); | |
| /* | |
| * Maybe EC region is required at bus_scan/acpi_get_devices. So it | |
| * is necessary to enable it as early as possible. | |
| */ | |
| acpi_boot_ec_enable(); | |
| printk(KERN_INFO PREFIX "Interpreter enabled\n"); | |
| /* Initialize sleep structures */ | |
| acpi_sleep_init(); | |
| /* | |
| * Get the system interrupt model and evaluate \_PIC. | |
| */ | |
| result = acpi_bus_init_irq(); | |
| if (result) | |
| goto error1; | |
| /* | |
| * Register the for all standard device notifications. | |
| */ | |
| status = | |
| acpi_install_notify_handler(ACPI_ROOT_OBJECT, ACPI_SYSTEM_NOTIFY, | |
| &acpi_bus_notify, NULL); | |
| if (ACPI_FAILURE(status)) { | |
| printk(KERN_ERR PREFIX | |
| "Unable to register for device notifications\n"); | |
| goto error1; | |
| } | |
| /* | |
| * Create the top ACPI proc directory | |
| */ | |
| acpi_root_dir = proc_mkdir(ACPI_BUS_FILE_ROOT, NULL); | |
| return 0; | |
| /* Mimic structured exception handling */ | |
| error1: | |
| acpi_terminate(); | |
| return -ENODEV; | |
| } | |
| struct kobject *acpi_kobj; | |
| static int __init acpi_init(void) | |
| { | |
| int result; | |
| if (acpi_disabled) { | |
| printk(KERN_INFO PREFIX "Interpreter disabled.\n"); | |
| return -ENODEV; | |
| } | |
| acpi_kobj = kobject_create_and_add("acpi", firmware_kobj); | |
| if (!acpi_kobj) { | |
| printk(KERN_WARNING "%s: kset create error\n", __func__); | |
| acpi_kobj = NULL; | |
| } | |
| init_acpi_device_notify(); | |
| result = acpi_bus_init(); | |
| if (result) { | |
| disable_acpi(); | |
| return result; | |
| } | |
| pci_mmcfg_late_init(); | |
| acpi_scan_init(); | |
| acpi_ec_init(); | |
| acpi_debugfs_init(); | |
| acpi_sleep_proc_init(); | |
| acpi_wakeup_device_init(); | |
| return 0; | |
| } | |
| subsys_initcall(acpi_init); |