| /* -*- linux-c -*- | |
| * drivers/char/viotape.c | |
| * | |
| * iSeries Virtual Tape | |
| * | |
| * Authors: Dave Boutcher <boutcher@us.ibm.com> | |
| * Ryan Arnold <ryanarn@us.ibm.com> | |
| * Colin Devilbiss <devilbis@us.ibm.com> | |
| * Stephen Rothwell | |
| * | |
| * (C) Copyright 2000-2004 IBM Corporation | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License as | |
| * published by the Free Software Foundation; either version 2 of the | |
| * License, or (at your option) anyu later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, but | |
| * WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
| * General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software Foundation, | |
| * Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
| * | |
| * This routine provides access to tape drives owned and managed by an OS/400 | |
| * partition running on the same box as this Linux partition. | |
| * | |
| * All tape operations are performed by sending messages back and forth to | |
| * the OS/400 partition. The format of the messages is defined in | |
| * iseries/vio.h | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/kernel.h> | |
| #include <linux/errno.h> | |
| #include <linux/init.h> | |
| #include <linux/wait.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/mtio.h> | |
| #include <linux/device.h> | |
| #include <linux/dma-mapping.h> | |
| #include <linux/fs.h> | |
| #include <linux/cdev.h> | |
| #include <linux/major.h> | |
| #include <linux/completion.h> | |
| #include <linux/proc_fs.h> | |
| #include <linux/seq_file.h> | |
| #include <linux/mutex.h> | |
| #include <linux/slab.h> | |
| #include <asm/uaccess.h> | |
| #include <asm/ioctls.h> | |
| #include <asm/firmware.h> | |
| #include <asm/vio.h> | |
| #include <asm/iseries/vio.h> | |
| #include <asm/iseries/hv_lp_event.h> | |
| #include <asm/iseries/hv_call_event.h> | |
| #include <asm/iseries/hv_lp_config.h> | |
| #define VIOTAPE_VERSION "1.2" | |
| #define VIOTAPE_MAXREQ 1 | |
| #define VIOTAPE_KERN_WARN KERN_WARNING "viotape: " | |
| #define VIOTAPE_KERN_INFO KERN_INFO "viotape: " | |
| static DEFINE_MUTEX(proc_viotape_mutex); | |
| static int viotape_numdev; | |
| /* | |
| * The minor number follows the conventions of the SCSI tape drives. The | |
| * rewind and mode are encoded in the minor #. We use this struct to break | |
| * them out | |
| */ | |
| struct viot_devinfo_struct { | |
| int devno; | |
| int mode; | |
| int rewind; | |
| }; | |
| #define VIOTAPOP_RESET 0 | |
| #define VIOTAPOP_FSF 1 | |
| #define VIOTAPOP_BSF 2 | |
| #define VIOTAPOP_FSR 3 | |
| #define VIOTAPOP_BSR 4 | |
| #define VIOTAPOP_WEOF 5 | |
| #define VIOTAPOP_REW 6 | |
| #define VIOTAPOP_NOP 7 | |
| #define VIOTAPOP_EOM 8 | |
| #define VIOTAPOP_ERASE 9 | |
| #define VIOTAPOP_SETBLK 10 | |
| #define VIOTAPOP_SETDENSITY 11 | |
| #define VIOTAPOP_SETPOS 12 | |
| #define VIOTAPOP_GETPOS 13 | |
| #define VIOTAPOP_SETPART 14 | |
| #define VIOTAPOP_UNLOAD 15 | |
| enum viotaperc { | |
| viotape_InvalidRange = 0x0601, | |
| viotape_InvalidToken = 0x0602, | |
| viotape_DMAError = 0x0603, | |
| viotape_UseError = 0x0604, | |
| viotape_ReleaseError = 0x0605, | |
| viotape_InvalidTape = 0x0606, | |
| viotape_InvalidOp = 0x0607, | |
| viotape_TapeErr = 0x0608, | |
| viotape_AllocTimedOut = 0x0640, | |
| viotape_BOTEnc = 0x0641, | |
| viotape_BlankTape = 0x0642, | |
| viotape_BufferEmpty = 0x0643, | |
| viotape_CleanCartFound = 0x0644, | |
| viotape_CmdNotAllowed = 0x0645, | |
| viotape_CmdNotSupported = 0x0646, | |
| viotape_DataCheck = 0x0647, | |
| viotape_DecompressErr = 0x0648, | |
| viotape_DeviceTimeout = 0x0649, | |
| viotape_DeviceUnavail = 0x064a, | |
| viotape_DeviceBusy = 0x064b, | |
| viotape_EndOfMedia = 0x064c, | |
| viotape_EndOfTape = 0x064d, | |
| viotape_EquipCheck = 0x064e, | |
| viotape_InsufficientRs = 0x064f, | |
| viotape_InvalidLogBlk = 0x0650, | |
| viotape_LengthError = 0x0651, | |
| viotape_LibDoorOpen = 0x0652, | |
| viotape_LoadFailure = 0x0653, | |
| viotape_NotCapable = 0x0654, | |
| viotape_NotOperational = 0x0655, | |
| viotape_NotReady = 0x0656, | |
| viotape_OpCancelled = 0x0657, | |
| viotape_PhyLinkErr = 0x0658, | |
| viotape_RdyNotBOT = 0x0659, | |
| viotape_TapeMark = 0x065a, | |
| viotape_WriteProt = 0x065b | |
| }; | |
| static const struct vio_error_entry viotape_err_table[] = { | |
| { viotape_InvalidRange, EIO, "Internal error" }, | |
| { viotape_InvalidToken, EIO, "Internal error" }, | |
| { viotape_DMAError, EIO, "DMA error" }, | |
| { viotape_UseError, EIO, "Internal error" }, | |
| { viotape_ReleaseError, EIO, "Internal error" }, | |
| { viotape_InvalidTape, EIO, "Invalid tape device" }, | |
| { viotape_InvalidOp, EIO, "Invalid operation" }, | |
| { viotape_TapeErr, EIO, "Tape error" }, | |
| { viotape_AllocTimedOut, EBUSY, "Allocate timed out" }, | |
| { viotape_BOTEnc, EIO, "Beginning of tape encountered" }, | |
| { viotape_BlankTape, EIO, "Blank tape" }, | |
| { viotape_BufferEmpty, EIO, "Buffer empty" }, | |
| { viotape_CleanCartFound, ENOMEDIUM, "Cleaning cartridge found" }, | |
| { viotape_CmdNotAllowed, EIO, "Command not allowed" }, | |
| { viotape_CmdNotSupported, EIO, "Command not supported" }, | |
| { viotape_DataCheck, EIO, "Data check" }, | |
| { viotape_DecompressErr, EIO, "Decompression error" }, | |
| { viotape_DeviceTimeout, EBUSY, "Device timeout" }, | |
| { viotape_DeviceUnavail, EIO, "Device unavailable" }, | |
| { viotape_DeviceBusy, EBUSY, "Device busy" }, | |
| { viotape_EndOfMedia, ENOSPC, "End of media" }, | |
| { viotape_EndOfTape, ENOSPC, "End of tape" }, | |
| { viotape_EquipCheck, EIO, "Equipment check" }, | |
| { viotape_InsufficientRs, EOVERFLOW, "Insufficient tape resources" }, | |
| { viotape_InvalidLogBlk, EIO, "Invalid logical block location" }, | |
| { viotape_LengthError, EOVERFLOW, "Length error" }, | |
| { viotape_LibDoorOpen, EBUSY, "Door open" }, | |
| { viotape_LoadFailure, ENOMEDIUM, "Load failure" }, | |
| { viotape_NotCapable, EIO, "Not capable" }, | |
| { viotape_NotOperational, EIO, "Not operational" }, | |
| { viotape_NotReady, EIO, "Not ready" }, | |
| { viotape_OpCancelled, EIO, "Operation cancelled" }, | |
| { viotape_PhyLinkErr, EIO, "Physical link error" }, | |
| { viotape_RdyNotBOT, EIO, "Ready but not beginning of tape" }, | |
| { viotape_TapeMark, EIO, "Tape mark" }, | |
| { viotape_WriteProt, EROFS, "Write protection error" }, | |
| { 0, 0, NULL }, | |
| }; | |
| /* Maximum number of tapes we support */ | |
| #define VIOTAPE_MAX_TAPE HVMAXARCHITECTEDVIRTUALTAPES | |
| #define MAX_PARTITIONS 4 | |
| /* defines for current tape state */ | |
| #define VIOT_IDLE 0 | |
| #define VIOT_READING 1 | |
| #define VIOT_WRITING 2 | |
| /* Our info on the tapes */ | |
| static struct { | |
| const char *rsrcname; | |
| const char *type; | |
| const char *model; | |
| } viotape_unitinfo[VIOTAPE_MAX_TAPE]; | |
| static struct mtget viomtget[VIOTAPE_MAX_TAPE]; | |
| static struct class *tape_class; | |
| static struct device *tape_device[VIOTAPE_MAX_TAPE]; | |
| /* | |
| * maintain the current state of each tape (and partition) | |
| * so that we know when to write EOF marks. | |
| */ | |
| static struct { | |
| unsigned char cur_part; | |
| unsigned char part_stat_rwi[MAX_PARTITIONS]; | |
| } state[VIOTAPE_MAX_TAPE]; | |
| /* We single-thread */ | |
| static struct semaphore reqSem; | |
| /* | |
| * When we send a request, we use this struct to get the response back | |
| * from the interrupt handler | |
| */ | |
| struct op_struct { | |
| void *buffer; | |
| dma_addr_t dmaaddr; | |
| size_t count; | |
| int rc; | |
| int non_blocking; | |
| struct completion com; | |
| struct device *dev; | |
| struct op_struct *next; | |
| }; | |
| static spinlock_t op_struct_list_lock; | |
| static struct op_struct *op_struct_list; | |
| /* forward declaration to resolve interdependence */ | |
| static int chg_state(int index, unsigned char new_state, struct file *file); | |
| /* procfs support */ | |
| static int proc_viotape_show(struct seq_file *m, void *v) | |
| { | |
| int i; | |
| seq_printf(m, "viotape driver version " VIOTAPE_VERSION "\n"); | |
| for (i = 0; i < viotape_numdev; i++) { | |
| seq_printf(m, "viotape device %d is iSeries resource %10.10s" | |
| "type %4.4s, model %3.3s\n", | |
| i, viotape_unitinfo[i].rsrcname, | |
| viotape_unitinfo[i].type, | |
| viotape_unitinfo[i].model); | |
| } | |
| return 0; | |
| } | |
| static int proc_viotape_open(struct inode *inode, struct file *file) | |
| { | |
| return single_open(file, proc_viotape_show, NULL); | |
| } | |
| static const struct file_operations proc_viotape_operations = { | |
| .owner = THIS_MODULE, | |
| .open = proc_viotape_open, | |
| .read = seq_read, | |
| .llseek = seq_lseek, | |
| .release = single_release, | |
| }; | |
| /* Decode the device minor number into its parts */ | |
| void get_dev_info(struct inode *ino, struct viot_devinfo_struct *devi) | |
| { | |
| devi->devno = iminor(ino) & 0x1F; | |
| devi->mode = (iminor(ino) & 0x60) >> 5; | |
| /* if bit is set in the minor, do _not_ rewind automatically */ | |
| devi->rewind = (iminor(ino) & 0x80) == 0; | |
| } | |
| /* This is called only from the exit and init paths, so no need for locking */ | |
| static void clear_op_struct_pool(void) | |
| { | |
| while (op_struct_list) { | |
| struct op_struct *toFree = op_struct_list; | |
| op_struct_list = op_struct_list->next; | |
| kfree(toFree); | |
| } | |
| } | |
| /* Likewise, this is only called from the init path */ | |
| static int add_op_structs(int structs) | |
| { | |
| int i; | |
| for (i = 0; i < structs; ++i) { | |
| struct op_struct *new_struct = | |
| kmalloc(sizeof(*new_struct), GFP_KERNEL); | |
| if (!new_struct) { | |
| clear_op_struct_pool(); | |
| return -ENOMEM; | |
| } | |
| new_struct->next = op_struct_list; | |
| op_struct_list = new_struct; | |
| } | |
| return 0; | |
| } | |
| /* Allocate an op structure from our pool */ | |
| static struct op_struct *get_op_struct(void) | |
| { | |
| struct op_struct *retval; | |
| unsigned long flags; | |
| spin_lock_irqsave(&op_struct_list_lock, flags); | |
| retval = op_struct_list; | |
| if (retval) | |
| op_struct_list = retval->next; | |
| spin_unlock_irqrestore(&op_struct_list_lock, flags); | |
| if (retval) { | |
| memset(retval, 0, sizeof(*retval)); | |
| init_completion(&retval->com); | |
| } | |
| return retval; | |
| } | |
| /* Return an op structure to our pool */ | |
| static void free_op_struct(struct op_struct *op_struct) | |
| { | |
| unsigned long flags; | |
| spin_lock_irqsave(&op_struct_list_lock, flags); | |
| op_struct->next = op_struct_list; | |
| op_struct_list = op_struct; | |
| spin_unlock_irqrestore(&op_struct_list_lock, flags); | |
| } | |
| /* Map our tape return codes to errno values */ | |
| int tape_rc_to_errno(int tape_rc, char *operation, int tapeno) | |
| { | |
| const struct vio_error_entry *err; | |
| if (tape_rc == 0) | |
| return 0; | |
| err = vio_lookup_rc(viotape_err_table, tape_rc); | |
| printk(VIOTAPE_KERN_WARN "error(%s) 0x%04x on Device %d (%-10s): %s\n", | |
| operation, tape_rc, tapeno, | |
| viotape_unitinfo[tapeno].rsrcname, err->msg); | |
| return -err->errno; | |
| } | |
| /* Write */ | |
| static ssize_t viotap_write(struct file *file, const char *buf, | |
| size_t count, loff_t * ppos) | |
| { | |
| HvLpEvent_Rc hvrc; | |
| unsigned short flags = file->f_flags; | |
| int noblock = ((flags & O_NONBLOCK) != 0); | |
| ssize_t ret; | |
| struct viot_devinfo_struct devi; | |
| struct op_struct *op = get_op_struct(); | |
| if (op == NULL) | |
| return -ENOMEM; | |
| get_dev_info(file->f_path.dentry->d_inode, &devi); | |
| /* | |
| * We need to make sure we can send a request. We use | |
| * a semaphore to keep track of # requests in use. If | |
| * we are non-blocking, make sure we don't block on the | |
| * semaphore | |
| */ | |
| if (noblock) { | |
| if (down_trylock(&reqSem)) { | |
| ret = -EWOULDBLOCK; | |
| goto free_op; | |
| } | |
| } else | |
| down(&reqSem); | |
| /* Allocate a DMA buffer */ | |
| op->dev = tape_device[devi.devno]; | |
| op->buffer = dma_alloc_coherent(op->dev, count, &op->dmaaddr, | |
| GFP_ATOMIC); | |
| if (op->buffer == NULL) { | |
| printk(VIOTAPE_KERN_WARN | |
| "error allocating dma buffer for len %ld\n", | |
| count); | |
| ret = -EFAULT; | |
| goto up_sem; | |
| } | |
| /* Copy the data into the buffer */ | |
| if (copy_from_user(op->buffer, buf, count)) { | |
| printk(VIOTAPE_KERN_WARN "tape: error on copy from user\n"); | |
| ret = -EFAULT; | |
| goto free_dma; | |
| } | |
| op->non_blocking = noblock; | |
| init_completion(&op->com); | |
| op->count = count; | |
| hvrc = HvCallEvent_signalLpEventFast(viopath_hostLp, | |
| HvLpEvent_Type_VirtualIo, | |
| viomajorsubtype_tape | viotapewrite, | |
| HvLpEvent_AckInd_DoAck, HvLpEvent_AckType_ImmediateAck, | |
| viopath_sourceinst(viopath_hostLp), | |
| viopath_targetinst(viopath_hostLp), | |
| (u64)(unsigned long)op, VIOVERSION << 16, | |
| ((u64)devi.devno << 48) | op->dmaaddr, count, 0, 0); | |
| if (hvrc != HvLpEvent_Rc_Good) { | |
| printk(VIOTAPE_KERN_WARN "hv error on op %d\n", | |
| (int)hvrc); | |
| ret = -EIO; | |
| goto free_dma; | |
| } | |
| if (noblock) | |
| return count; | |
| wait_for_completion(&op->com); | |
| if (op->rc) | |
| ret = tape_rc_to_errno(op->rc, "write", devi.devno); | |
| else { | |
| chg_state(devi.devno, VIOT_WRITING, file); | |
| ret = op->count; | |
| } | |
| free_dma: | |
| dma_free_coherent(op->dev, count, op->buffer, op->dmaaddr); | |
| up_sem: | |
| up(&reqSem); | |
| free_op: | |
| free_op_struct(op); | |
| return ret; | |
| } | |
| /* read */ | |
| static ssize_t viotap_read(struct file *file, char *buf, size_t count, | |
| loff_t *ptr) | |
| { | |
| HvLpEvent_Rc hvrc; | |
| unsigned short flags = file->f_flags; | |
| struct op_struct *op = get_op_struct(); | |
| int noblock = ((flags & O_NONBLOCK) != 0); | |
| ssize_t ret; | |
| struct viot_devinfo_struct devi; | |
| if (op == NULL) | |
| return -ENOMEM; | |
| get_dev_info(file->f_path.dentry->d_inode, &devi); | |
| /* | |
| * We need to make sure we can send a request. We use | |
| * a semaphore to keep track of # requests in use. If | |
| * we are non-blocking, make sure we don't block on the | |
| * semaphore | |
| */ | |
| if (noblock) { | |
| if (down_trylock(&reqSem)) { | |
| ret = -EWOULDBLOCK; | |
| goto free_op; | |
| } | |
| } else | |
| down(&reqSem); | |
| chg_state(devi.devno, VIOT_READING, file); | |
| /* Allocate a DMA buffer */ | |
| op->dev = tape_device[devi.devno]; | |
| op->buffer = dma_alloc_coherent(op->dev, count, &op->dmaaddr, | |
| GFP_ATOMIC); | |
| if (op->buffer == NULL) { | |
| ret = -EFAULT; | |
| goto up_sem; | |
| } | |
| op->count = count; | |
| init_completion(&op->com); | |
| hvrc = HvCallEvent_signalLpEventFast(viopath_hostLp, | |
| HvLpEvent_Type_VirtualIo, | |
| viomajorsubtype_tape | viotaperead, | |
| HvLpEvent_AckInd_DoAck, HvLpEvent_AckType_ImmediateAck, | |
| viopath_sourceinst(viopath_hostLp), | |
| viopath_targetinst(viopath_hostLp), | |
| (u64)(unsigned long)op, VIOVERSION << 16, | |
| ((u64)devi.devno << 48) | op->dmaaddr, count, 0, 0); | |
| if (hvrc != HvLpEvent_Rc_Good) { | |
| printk(VIOTAPE_KERN_WARN "tape hv error on op %d\n", | |
| (int)hvrc); | |
| ret = -EIO; | |
| goto free_dma; | |
| } | |
| wait_for_completion(&op->com); | |
| if (op->rc) | |
| ret = tape_rc_to_errno(op->rc, "read", devi.devno); | |
| else { | |
| ret = op->count; | |
| if (ret && copy_to_user(buf, op->buffer, ret)) { | |
| printk(VIOTAPE_KERN_WARN "error on copy_to_user\n"); | |
| ret = -EFAULT; | |
| } | |
| } | |
| free_dma: | |
| dma_free_coherent(op->dev, count, op->buffer, op->dmaaddr); | |
| up_sem: | |
| up(&reqSem); | |
| free_op: | |
| free_op_struct(op); | |
| return ret; | |
| } | |
| /* ioctl */ | |
| static int viotap_ioctl(struct inode *inode, struct file *file, | |
| unsigned int cmd, unsigned long arg) | |
| { | |
| HvLpEvent_Rc hvrc; | |
| int ret; | |
| struct viot_devinfo_struct devi; | |
| struct mtop mtc; | |
| u32 myOp; | |
| struct op_struct *op = get_op_struct(); | |
| if (op == NULL) | |
| return -ENOMEM; | |
| get_dev_info(file->f_path.dentry->d_inode, &devi); | |
| down(&reqSem); | |
| ret = -EINVAL; | |
| switch (cmd) { | |
| case MTIOCTOP: | |
| ret = -EFAULT; | |
| /* | |
| * inode is null if and only if we (the kernel) | |
| * made the request | |
| */ | |
| if (inode == NULL) | |
| memcpy(&mtc, (void *) arg, sizeof(struct mtop)); | |
| else if (copy_from_user((char *)&mtc, (char *)arg, | |
| sizeof(struct mtop))) | |
| goto free_op; | |
| ret = -EIO; | |
| switch (mtc.mt_op) { | |
| case MTRESET: | |
| myOp = VIOTAPOP_RESET; | |
| break; | |
| case MTFSF: | |
| myOp = VIOTAPOP_FSF; | |
| break; | |
| case MTBSF: | |
| myOp = VIOTAPOP_BSF; | |
| break; | |
| case MTFSR: | |
| myOp = VIOTAPOP_FSR; | |
| break; | |
| case MTBSR: | |
| myOp = VIOTAPOP_BSR; | |
| break; | |
| case MTWEOF: | |
| myOp = VIOTAPOP_WEOF; | |
| break; | |
| case MTREW: | |
| myOp = VIOTAPOP_REW; | |
| break; | |
| case MTNOP: | |
| myOp = VIOTAPOP_NOP; | |
| break; | |
| case MTEOM: | |
| myOp = VIOTAPOP_EOM; | |
| break; | |
| case MTERASE: | |
| myOp = VIOTAPOP_ERASE; | |
| break; | |
| case MTSETBLK: | |
| myOp = VIOTAPOP_SETBLK; | |
| break; | |
| case MTSETDENSITY: | |
| myOp = VIOTAPOP_SETDENSITY; | |
| break; | |
| case MTTELL: | |
| myOp = VIOTAPOP_GETPOS; | |
| break; | |
| case MTSEEK: | |
| myOp = VIOTAPOP_SETPOS; | |
| break; | |
| case MTSETPART: | |
| myOp = VIOTAPOP_SETPART; | |
| break; | |
| case MTOFFL: | |
| myOp = VIOTAPOP_UNLOAD; | |
| break; | |
| default: | |
| printk(VIOTAPE_KERN_WARN "MTIOCTOP called " | |
| "with invalid op 0x%x\n", mtc.mt_op); | |
| goto free_op; | |
| } | |
| /* | |
| * if we moved the head, we are no longer | |
| * reading or writing | |
| */ | |
| switch (mtc.mt_op) { | |
| case MTFSF: | |
| case MTBSF: | |
| case MTFSR: | |
| case MTBSR: | |
| case MTTELL: | |
| case MTSEEK: | |
| case MTREW: | |
| chg_state(devi.devno, VIOT_IDLE, file); | |
| } | |
| init_completion(&op->com); | |
| hvrc = HvCallEvent_signalLpEventFast(viopath_hostLp, | |
| HvLpEvent_Type_VirtualIo, | |
| viomajorsubtype_tape | viotapeop, | |
| HvLpEvent_AckInd_DoAck, | |
| HvLpEvent_AckType_ImmediateAck, | |
| viopath_sourceinst(viopath_hostLp), | |
| viopath_targetinst(viopath_hostLp), | |
| (u64)(unsigned long)op, | |
| VIOVERSION << 16, | |
| ((u64)devi.devno << 48), 0, | |
| (((u64)myOp) << 32) | mtc.mt_count, 0); | |
| if (hvrc != HvLpEvent_Rc_Good) { | |
| printk(VIOTAPE_KERN_WARN "hv error on op %d\n", | |
| (int)hvrc); | |
| goto free_op; | |
| } | |
| wait_for_completion(&op->com); | |
| ret = tape_rc_to_errno(op->rc, "tape operation", devi.devno); | |
| goto free_op; | |
| case MTIOCGET: | |
| ret = -EIO; | |
| init_completion(&op->com); | |
| hvrc = HvCallEvent_signalLpEventFast(viopath_hostLp, | |
| HvLpEvent_Type_VirtualIo, | |
| viomajorsubtype_tape | viotapegetstatus, | |
| HvLpEvent_AckInd_DoAck, | |
| HvLpEvent_AckType_ImmediateAck, | |
| viopath_sourceinst(viopath_hostLp), | |
| viopath_targetinst(viopath_hostLp), | |
| (u64)(unsigned long)op, VIOVERSION << 16, | |
| ((u64)devi.devno << 48), 0, 0, 0); | |
| if (hvrc != HvLpEvent_Rc_Good) { | |
| printk(VIOTAPE_KERN_WARN "hv error on op %d\n", | |
| (int)hvrc); | |
| goto free_op; | |
| } | |
| wait_for_completion(&op->com); | |
| /* Operation is complete - grab the error code */ | |
| ret = tape_rc_to_errno(op->rc, "get status", devi.devno); | |
| free_op_struct(op); | |
| up(&reqSem); | |
| if ((ret == 0) && copy_to_user((void *)arg, | |
| &viomtget[devi.devno], | |
| sizeof(viomtget[0]))) | |
| ret = -EFAULT; | |
| return ret; | |
| case MTIOCPOS: | |
| printk(VIOTAPE_KERN_WARN "Got an (unsupported) MTIOCPOS\n"); | |
| break; | |
| default: | |
| printk(VIOTAPE_KERN_WARN "got an unsupported ioctl 0x%0x\n", | |
| cmd); | |
| break; | |
| } | |
| free_op: | |
| free_op_struct(op); | |
| up(&reqSem); | |
| return ret; | |
| } | |
| static long viotap_unlocked_ioctl(struct file *file, | |
| unsigned int cmd, unsigned long arg) | |
| { | |
| long rc; | |
| mutex_lock(&proc_viotape_mutex); | |
| rc = viotap_ioctl(file->f_path.dentry->d_inode, file, cmd, arg); | |
| mutex_unlock(&proc_viotape_mutex); | |
| return rc; | |
| } | |
| static int viotap_open(struct inode *inode, struct file *file) | |
| { | |
| HvLpEvent_Rc hvrc; | |
| struct viot_devinfo_struct devi; | |
| int ret; | |
| struct op_struct *op = get_op_struct(); | |
| if (op == NULL) | |
| return -ENOMEM; | |
| mutex_lock(&proc_viotape_mutex); | |
| get_dev_info(file->f_path.dentry->d_inode, &devi); | |
| /* Note: We currently only support one mode! */ | |
| if ((devi.devno >= viotape_numdev) || (devi.mode)) { | |
| ret = -ENODEV; | |
| goto free_op; | |
| } | |
| init_completion(&op->com); | |
| hvrc = HvCallEvent_signalLpEventFast(viopath_hostLp, | |
| HvLpEvent_Type_VirtualIo, | |
| viomajorsubtype_tape | viotapeopen, | |
| HvLpEvent_AckInd_DoAck, HvLpEvent_AckType_ImmediateAck, | |
| viopath_sourceinst(viopath_hostLp), | |
| viopath_targetinst(viopath_hostLp), | |
| (u64)(unsigned long)op, VIOVERSION << 16, | |
| ((u64)devi.devno << 48), 0, 0, 0); | |
| if (hvrc != 0) { | |
| printk(VIOTAPE_KERN_WARN "bad rc on signalLpEvent %d\n", | |
| (int) hvrc); | |
| ret = -EIO; | |
| goto free_op; | |
| } | |
| wait_for_completion(&op->com); | |
| ret = tape_rc_to_errno(op->rc, "open", devi.devno); | |
| free_op: | |
| free_op_struct(op); | |
| mutex_unlock(&proc_viotape_mutex); | |
| return ret; | |
| } | |
| static int viotap_release(struct inode *inode, struct file *file) | |
| { | |
| HvLpEvent_Rc hvrc; | |
| struct viot_devinfo_struct devi; | |
| int ret = 0; | |
| struct op_struct *op = get_op_struct(); | |
| if (op == NULL) | |
| return -ENOMEM; | |
| init_completion(&op->com); | |
| get_dev_info(file->f_path.dentry->d_inode, &devi); | |
| if (devi.devno >= viotape_numdev) { | |
| ret = -ENODEV; | |
| goto free_op; | |
| } | |
| chg_state(devi.devno, VIOT_IDLE, file); | |
| if (devi.rewind) { | |
| hvrc = HvCallEvent_signalLpEventFast(viopath_hostLp, | |
| HvLpEvent_Type_VirtualIo, | |
| viomajorsubtype_tape | viotapeop, | |
| HvLpEvent_AckInd_DoAck, | |
| HvLpEvent_AckType_ImmediateAck, | |
| viopath_sourceinst(viopath_hostLp), | |
| viopath_targetinst(viopath_hostLp), | |
| (u64)(unsigned long)op, VIOVERSION << 16, | |
| ((u64)devi.devno << 48), 0, | |
| ((u64)VIOTAPOP_REW) << 32, 0); | |
| wait_for_completion(&op->com); | |
| tape_rc_to_errno(op->rc, "rewind", devi.devno); | |
| } | |
| hvrc = HvCallEvent_signalLpEventFast(viopath_hostLp, | |
| HvLpEvent_Type_VirtualIo, | |
| viomajorsubtype_tape | viotapeclose, | |
| HvLpEvent_AckInd_DoAck, HvLpEvent_AckType_ImmediateAck, | |
| viopath_sourceinst(viopath_hostLp), | |
| viopath_targetinst(viopath_hostLp), | |
| (u64)(unsigned long)op, VIOVERSION << 16, | |
| ((u64)devi.devno << 48), 0, 0, 0); | |
| if (hvrc != 0) { | |
| printk(VIOTAPE_KERN_WARN "bad rc on signalLpEvent %d\n", | |
| (int) hvrc); | |
| ret = -EIO; | |
| goto free_op; | |
| } | |
| wait_for_completion(&op->com); | |
| if (op->rc) | |
| printk(VIOTAPE_KERN_WARN "close failed\n"); | |
| free_op: | |
| free_op_struct(op); | |
| return ret; | |
| } | |
| const struct file_operations viotap_fops = { | |
| .owner = THIS_MODULE, | |
| .read = viotap_read, | |
| .write = viotap_write, | |
| .unlocked_ioctl = viotap_unlocked_ioctl, | |
| .open = viotap_open, | |
| .release = viotap_release, | |
| .llseek = noop_llseek, | |
| }; | |
| /* Handle interrupt events for tape */ | |
| static void vioHandleTapeEvent(struct HvLpEvent *event) | |
| { | |
| int tapeminor; | |
| struct op_struct *op; | |
| struct viotapelpevent *tevent = (struct viotapelpevent *)event; | |
| if (event == NULL) { | |
| /* Notification that a partition went away! */ | |
| if (!viopath_isactive(viopath_hostLp)) { | |
| /* TODO! Clean up */ | |
| } | |
| return; | |
| } | |
| tapeminor = event->xSubtype & VIOMINOR_SUBTYPE_MASK; | |
| op = (struct op_struct *)event->xCorrelationToken; | |
| switch (tapeminor) { | |
| case viotapeopen: | |
| case viotapeclose: | |
| op->rc = tevent->sub_type_result; | |
| complete(&op->com); | |
| break; | |
| case viotaperead: | |
| op->rc = tevent->sub_type_result; | |
| op->count = tevent->len; | |
| complete(&op->com); | |
| break; | |
| case viotapewrite: | |
| if (op->non_blocking) { | |
| dma_free_coherent(op->dev, op->count, | |
| op->buffer, op->dmaaddr); | |
| free_op_struct(op); | |
| up(&reqSem); | |
| } else { | |
| op->rc = tevent->sub_type_result; | |
| op->count = tevent->len; | |
| complete(&op->com); | |
| } | |
| break; | |
| case viotapeop: | |
| case viotapegetpos: | |
| case viotapesetpos: | |
| case viotapegetstatus: | |
| if (op) { | |
| op->count = tevent->u.op.count; | |
| op->rc = tevent->sub_type_result; | |
| if (!op->non_blocking) | |
| complete(&op->com); | |
| } | |
| break; | |
| default: | |
| printk(VIOTAPE_KERN_WARN "weird ack\n"); | |
| } | |
| } | |
| static int viotape_probe(struct vio_dev *vdev, const struct vio_device_id *id) | |
| { | |
| int i = vdev->unit_address; | |
| int j; | |
| struct device_node *node = vdev->dev.of_node; | |
| if (i >= VIOTAPE_MAX_TAPE) | |
| return -ENODEV; | |
| if (!node) | |
| return -ENODEV; | |
| if (i >= viotape_numdev) | |
| viotape_numdev = i + 1; | |
| tape_device[i] = &vdev->dev; | |
| viotape_unitinfo[i].rsrcname = of_get_property(node, | |
| "linux,vio_rsrcname", NULL); | |
| viotape_unitinfo[i].type = of_get_property(node, "linux,vio_type", | |
| NULL); | |
| viotape_unitinfo[i].model = of_get_property(node, "linux,vio_model", | |
| NULL); | |
| state[i].cur_part = 0; | |
| for (j = 0; j < MAX_PARTITIONS; ++j) | |
| state[i].part_stat_rwi[j] = VIOT_IDLE; | |
| device_create(tape_class, NULL, MKDEV(VIOTAPE_MAJOR, i), NULL, | |
| "iseries!vt%d", i); | |
| device_create(tape_class, NULL, MKDEV(VIOTAPE_MAJOR, i | 0x80), NULL, | |
| "iseries!nvt%d", i); | |
| printk(VIOTAPE_KERN_INFO "tape iseries/vt%d is iSeries " | |
| "resource %10.10s type %4.4s, model %3.3s\n", | |
| i, viotape_unitinfo[i].rsrcname, | |
| viotape_unitinfo[i].type, viotape_unitinfo[i].model); | |
| return 0; | |
| } | |
| static int viotape_remove(struct vio_dev *vdev) | |
| { | |
| int i = vdev->unit_address; | |
| device_destroy(tape_class, MKDEV(VIOTAPE_MAJOR, i | 0x80)); | |
| device_destroy(tape_class, MKDEV(VIOTAPE_MAJOR, i)); | |
| return 0; | |
| } | |
| /** | |
| * viotape_device_table: Used by vio.c to match devices that we | |
| * support. | |
| */ | |
| static struct vio_device_id viotape_device_table[] __devinitdata = { | |
| { "byte", "IBM,iSeries-viotape" }, | |
| { "", "" } | |
| }; | |
| MODULE_DEVICE_TABLE(vio, viotape_device_table); | |
| static struct vio_driver viotape_driver = { | |
| .id_table = viotape_device_table, | |
| .probe = viotape_probe, | |
| .remove = viotape_remove, | |
| .driver = { | |
| .name = "viotape", | |
| .owner = THIS_MODULE, | |
| } | |
| }; | |
| int __init viotap_init(void) | |
| { | |
| int ret; | |
| if (!firmware_has_feature(FW_FEATURE_ISERIES)) | |
| return -ENODEV; | |
| op_struct_list = NULL; | |
| if ((ret = add_op_structs(VIOTAPE_MAXREQ)) < 0) { | |
| printk(VIOTAPE_KERN_WARN "couldn't allocate op structs\n"); | |
| return ret; | |
| } | |
| spin_lock_init(&op_struct_list_lock); | |
| sema_init(&reqSem, VIOTAPE_MAXREQ); | |
| if (viopath_hostLp == HvLpIndexInvalid) { | |
| vio_set_hostlp(); | |
| if (viopath_hostLp == HvLpIndexInvalid) { | |
| ret = -ENODEV; | |
| goto clear_op; | |
| } | |
| } | |
| ret = viopath_open(viopath_hostLp, viomajorsubtype_tape, | |
| VIOTAPE_MAXREQ + 2); | |
| if (ret) { | |
| printk(VIOTAPE_KERN_WARN | |
| "error on viopath_open to hostlp %d\n", ret); | |
| ret = -EIO; | |
| goto clear_op; | |
| } | |
| printk(VIOTAPE_KERN_INFO "vers " VIOTAPE_VERSION | |
| ", hosting partition %d\n", viopath_hostLp); | |
| vio_setHandler(viomajorsubtype_tape, vioHandleTapeEvent); | |
| ret = register_chrdev(VIOTAPE_MAJOR, "viotape", &viotap_fops); | |
| if (ret < 0) { | |
| printk(VIOTAPE_KERN_WARN "Error registering viotape device\n"); | |
| goto clear_handler; | |
| } | |
| tape_class = class_create(THIS_MODULE, "tape"); | |
| if (IS_ERR(tape_class)) { | |
| printk(VIOTAPE_KERN_WARN "Unable to allocat class\n"); | |
| ret = PTR_ERR(tape_class); | |
| goto unreg_chrdev; | |
| } | |
| ret = vio_register_driver(&viotape_driver); | |
| if (ret) | |
| goto unreg_class; | |
| proc_create("iSeries/viotape", S_IFREG|S_IRUGO, NULL, | |
| &proc_viotape_operations); | |
| return 0; | |
| unreg_class: | |
| class_destroy(tape_class); | |
| unreg_chrdev: | |
| unregister_chrdev(VIOTAPE_MAJOR, "viotape"); | |
| clear_handler: | |
| vio_clearHandler(viomajorsubtype_tape); | |
| viopath_close(viopath_hostLp, viomajorsubtype_tape, VIOTAPE_MAXREQ + 2); | |
| clear_op: | |
| clear_op_struct_pool(); | |
| return ret; | |
| } | |
| /* Give a new state to the tape object */ | |
| static int chg_state(int index, unsigned char new_state, struct file *file) | |
| { | |
| unsigned char *cur_state = | |
| &state[index].part_stat_rwi[state[index].cur_part]; | |
| int rc = 0; | |
| /* if the same state, don't bother */ | |
| if (*cur_state == new_state) | |
| return 0; | |
| /* write an EOF if changing from writing to some other state */ | |
| if (*cur_state == VIOT_WRITING) { | |
| struct mtop write_eof = { MTWEOF, 1 }; | |
| rc = viotap_ioctl(NULL, file, MTIOCTOP, | |
| (unsigned long)&write_eof); | |
| } | |
| *cur_state = new_state; | |
| return rc; | |
| } | |
| /* Cleanup */ | |
| static void __exit viotap_exit(void) | |
| { | |
| remove_proc_entry("iSeries/viotape", NULL); | |
| vio_unregister_driver(&viotape_driver); | |
| class_destroy(tape_class); | |
| unregister_chrdev(VIOTAPE_MAJOR, "viotape"); | |
| viopath_close(viopath_hostLp, viomajorsubtype_tape, VIOTAPE_MAXREQ + 2); | |
| vio_clearHandler(viomajorsubtype_tape); | |
| clear_op_struct_pool(); | |
| } | |
| MODULE_LICENSE("GPL"); | |
| module_init(viotap_init); | |
| module_exit(viotap_exit); |