| /* | |
| * linux/drivers/cpufreq/cpufreq.c | |
| * | |
| * Copyright (C) 2001 Russell King | |
| * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de> | |
| * | |
| * Oct 2005 - Ashok Raj <ashok.raj@intel.com> | |
| * Added handling for CPU hotplug | |
| * Feb 2006 - Jacob Shin <jacob.shin@amd.com> | |
| * Fix handling for CPU hotplug -- affected CPUs | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| * | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/init.h> | |
| #include <linux/notifier.h> | |
| #include <linux/cpufreq.h> | |
| #include <linux/delay.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/device.h> | |
| #include <linux/slab.h> | |
| #include <linux/cpu.h> | |
| #include <linux/completion.h> | |
| #include <linux/mutex.h> | |
| #include <linux/syscore_ops.h> | |
| #include <trace/events/power.h> | |
| /** | |
| * The "cpufreq driver" - the arch- or hardware-dependent low | |
| * level driver of CPUFreq support, and its spinlock. This lock | |
| * also protects the cpufreq_cpu_data array. | |
| */ | |
| static struct cpufreq_driver *cpufreq_driver; | |
| static DEFINE_PER_CPU(struct cpufreq_policy *, cpufreq_cpu_data); | |
| #ifdef CONFIG_HOTPLUG_CPU | |
| /* This one keeps track of the previously set governor of a removed CPU */ | |
| static DEFINE_PER_CPU(char[CPUFREQ_NAME_LEN], cpufreq_cpu_governor); | |
| #endif | |
| static DEFINE_SPINLOCK(cpufreq_driver_lock); | |
| /* | |
| * cpu_policy_rwsem is a per CPU reader-writer semaphore designed to cure | |
| * all cpufreq/hotplug/workqueue/etc related lock issues. | |
| * | |
| * The rules for this semaphore: | |
| * - Any routine that wants to read from the policy structure will | |
| * do a down_read on this semaphore. | |
| * - Any routine that will write to the policy structure and/or may take away | |
| * the policy altogether (eg. CPU hotplug), will hold this lock in write | |
| * mode before doing so. | |
| * | |
| * Additional rules: | |
| * - All holders of the lock should check to make sure that the CPU they | |
| * are concerned with are online after they get the lock. | |
| * - Governor routines that can be called in cpufreq hotplug path should not | |
| * take this sem as top level hotplug notifier handler takes this. | |
| * - Lock should not be held across | |
| * __cpufreq_governor(data, CPUFREQ_GOV_STOP); | |
| */ | |
| static DEFINE_PER_CPU(int, cpufreq_policy_cpu); | |
| static DEFINE_PER_CPU(struct rw_semaphore, cpu_policy_rwsem); | |
| #define lock_policy_rwsem(mode, cpu) \ | |
| static int lock_policy_rwsem_##mode \ | |
| (int cpu) \ | |
| { \ | |
| int policy_cpu = per_cpu(cpufreq_policy_cpu, cpu); \ | |
| BUG_ON(policy_cpu == -1); \ | |
| down_##mode(&per_cpu(cpu_policy_rwsem, policy_cpu)); \ | |
| if (unlikely(!cpu_online(cpu))) { \ | |
| up_##mode(&per_cpu(cpu_policy_rwsem, policy_cpu)); \ | |
| return -1; \ | |
| } \ | |
| \ | |
| return 0; \ | |
| } | |
| lock_policy_rwsem(read, cpu); | |
| lock_policy_rwsem(write, cpu); | |
| static void unlock_policy_rwsem_read(int cpu) | |
| { | |
| int policy_cpu = per_cpu(cpufreq_policy_cpu, cpu); | |
| BUG_ON(policy_cpu == -1); | |
| up_read(&per_cpu(cpu_policy_rwsem, policy_cpu)); | |
| } | |
| static void unlock_policy_rwsem_write(int cpu) | |
| { | |
| int policy_cpu = per_cpu(cpufreq_policy_cpu, cpu); | |
| BUG_ON(policy_cpu == -1); | |
| up_write(&per_cpu(cpu_policy_rwsem, policy_cpu)); | |
| } | |
| /* internal prototypes */ | |
| static int __cpufreq_governor(struct cpufreq_policy *policy, | |
| unsigned int event); | |
| static unsigned int __cpufreq_get(unsigned int cpu); | |
| static void handle_update(struct work_struct *work); | |
| /** | |
| * Two notifier lists: the "policy" list is involved in the | |
| * validation process for a new CPU frequency policy; the | |
| * "transition" list for kernel code that needs to handle | |
| * changes to devices when the CPU clock speed changes. | |
| * The mutex locks both lists. | |
| */ | |
| static BLOCKING_NOTIFIER_HEAD(cpufreq_policy_notifier_list); | |
| static struct srcu_notifier_head cpufreq_transition_notifier_list; | |
| static bool init_cpufreq_transition_notifier_list_called; | |
| static int __init init_cpufreq_transition_notifier_list(void) | |
| { | |
| srcu_init_notifier_head(&cpufreq_transition_notifier_list); | |
| init_cpufreq_transition_notifier_list_called = true; | |
| return 0; | |
| } | |
| pure_initcall(init_cpufreq_transition_notifier_list); | |
| static LIST_HEAD(cpufreq_governor_list); | |
| static DEFINE_MUTEX(cpufreq_governor_mutex); | |
| struct cpufreq_policy *cpufreq_cpu_get(unsigned int cpu) | |
| { | |
| struct cpufreq_policy *data; | |
| unsigned long flags; | |
| if (cpu >= nr_cpu_ids) | |
| goto err_out; | |
| /* get the cpufreq driver */ | |
| spin_lock_irqsave(&cpufreq_driver_lock, flags); | |
| if (!cpufreq_driver) | |
| goto err_out_unlock; | |
| if (!try_module_get(cpufreq_driver->owner)) | |
| goto err_out_unlock; | |
| /* get the CPU */ | |
| data = per_cpu(cpufreq_cpu_data, cpu); | |
| if (!data) | |
| goto err_out_put_module; | |
| if (!kobject_get(&data->kobj)) | |
| goto err_out_put_module; | |
| spin_unlock_irqrestore(&cpufreq_driver_lock, flags); | |
| return data; | |
| err_out_put_module: | |
| module_put(cpufreq_driver->owner); | |
| err_out_unlock: | |
| spin_unlock_irqrestore(&cpufreq_driver_lock, flags); | |
| err_out: | |
| return NULL; | |
| } | |
| EXPORT_SYMBOL_GPL(cpufreq_cpu_get); | |
| void cpufreq_cpu_put(struct cpufreq_policy *data) | |
| { | |
| kobject_put(&data->kobj); | |
| module_put(cpufreq_driver->owner); | |
| } | |
| EXPORT_SYMBOL_GPL(cpufreq_cpu_put); | |
| /********************************************************************* | |
| * EXTERNALLY AFFECTING FREQUENCY CHANGES * | |
| *********************************************************************/ | |
| /** | |
| * adjust_jiffies - adjust the system "loops_per_jiffy" | |
| * | |
| * This function alters the system "loops_per_jiffy" for the clock | |
| * speed change. Note that loops_per_jiffy cannot be updated on SMP | |
| * systems as each CPU might be scaled differently. So, use the arch | |
| * per-CPU loops_per_jiffy value wherever possible. | |
| */ | |
| #ifndef CONFIG_SMP | |
| static unsigned long l_p_j_ref; | |
| static unsigned int l_p_j_ref_freq; | |
| static void adjust_jiffies(unsigned long val, struct cpufreq_freqs *ci) | |
| { | |
| if (ci->flags & CPUFREQ_CONST_LOOPS) | |
| return; | |
| if (!l_p_j_ref_freq) { | |
| l_p_j_ref = loops_per_jiffy; | |
| l_p_j_ref_freq = ci->old; | |
| pr_debug("saving %lu as reference value for loops_per_jiffy; " | |
| "freq is %u kHz\n", l_p_j_ref, l_p_j_ref_freq); | |
| } | |
| if ((val == CPUFREQ_PRECHANGE && ci->old < ci->new) || | |
| (val == CPUFREQ_POSTCHANGE && ci->old > ci->new) || | |
| (val == CPUFREQ_RESUMECHANGE || val == CPUFREQ_SUSPENDCHANGE)) { | |
| loops_per_jiffy = cpufreq_scale(l_p_j_ref, l_p_j_ref_freq, | |
| ci->new); | |
| pr_debug("scaling loops_per_jiffy to %lu " | |
| "for frequency %u kHz\n", loops_per_jiffy, ci->new); | |
| } | |
| } | |
| #else | |
| static inline void adjust_jiffies(unsigned long val, struct cpufreq_freqs *ci) | |
| { | |
| return; | |
| } | |
| #endif | |
| /** | |
| * cpufreq_notify_transition - call notifier chain and adjust_jiffies | |
| * on frequency transition. | |
| * | |
| * This function calls the transition notifiers and the "adjust_jiffies" | |
| * function. It is called twice on all CPU frequency changes that have | |
| * external effects. | |
| */ | |
| void cpufreq_notify_transition(struct cpufreq_freqs *freqs, unsigned int state) | |
| { | |
| struct cpufreq_policy *policy; | |
| BUG_ON(irqs_disabled()); | |
| freqs->flags = cpufreq_driver->flags; | |
| pr_debug("notification %u of frequency transition to %u kHz\n", | |
| state, freqs->new); | |
| policy = per_cpu(cpufreq_cpu_data, freqs->cpu); | |
| switch (state) { | |
| case CPUFREQ_PRECHANGE: | |
| /* detect if the driver reported a value as "old frequency" | |
| * which is not equal to what the cpufreq core thinks is | |
| * "old frequency". | |
| */ | |
| if (!(cpufreq_driver->flags & CPUFREQ_CONST_LOOPS)) { | |
| if ((policy) && (policy->cpu == freqs->cpu) && | |
| (policy->cur) && (policy->cur != freqs->old)) { | |
| pr_debug("Warning: CPU frequency is" | |
| " %u, cpufreq assumed %u kHz.\n", | |
| freqs->old, policy->cur); | |
| freqs->old = policy->cur; | |
| } | |
| } | |
| srcu_notifier_call_chain(&cpufreq_transition_notifier_list, | |
| CPUFREQ_PRECHANGE, freqs); | |
| adjust_jiffies(CPUFREQ_PRECHANGE, freqs); | |
| break; | |
| case CPUFREQ_POSTCHANGE: | |
| adjust_jiffies(CPUFREQ_POSTCHANGE, freqs); | |
| pr_debug("FREQ: %lu - CPU: %lu", (unsigned long)freqs->new, | |
| (unsigned long)freqs->cpu); | |
| trace_power_frequency(POWER_PSTATE, freqs->new, freqs->cpu); | |
| trace_cpu_frequency(freqs->new, freqs->cpu); | |
| srcu_notifier_call_chain(&cpufreq_transition_notifier_list, | |
| CPUFREQ_POSTCHANGE, freqs); | |
| if (likely(policy) && likely(policy->cpu == freqs->cpu)) | |
| policy->cur = freqs->new; | |
| break; | |
| } | |
| } | |
| EXPORT_SYMBOL_GPL(cpufreq_notify_transition); | |
| /********************************************************************* | |
| * SYSFS INTERFACE * | |
| *********************************************************************/ | |
| static struct cpufreq_governor *__find_governor(const char *str_governor) | |
| { | |
| struct cpufreq_governor *t; | |
| list_for_each_entry(t, &cpufreq_governor_list, governor_list) | |
| if (!strnicmp(str_governor, t->name, CPUFREQ_NAME_LEN)) | |
| return t; | |
| return NULL; | |
| } | |
| /** | |
| * cpufreq_parse_governor - parse a governor string | |
| */ | |
| static int cpufreq_parse_governor(char *str_governor, unsigned int *policy, | |
| struct cpufreq_governor **governor) | |
| { | |
| int err = -EINVAL; | |
| if (!cpufreq_driver) | |
| goto out; | |
| if (cpufreq_driver->setpolicy) { | |
| if (!strnicmp(str_governor, "performance", CPUFREQ_NAME_LEN)) { | |
| *policy = CPUFREQ_POLICY_PERFORMANCE; | |
| err = 0; | |
| } else if (!strnicmp(str_governor, "powersave", | |
| CPUFREQ_NAME_LEN)) { | |
| *policy = CPUFREQ_POLICY_POWERSAVE; | |
| err = 0; | |
| } | |
| } else if (cpufreq_driver->target) { | |
| struct cpufreq_governor *t; | |
| mutex_lock(&cpufreq_governor_mutex); | |
| t = __find_governor(str_governor); | |
| if (t == NULL) { | |
| int ret; | |
| mutex_unlock(&cpufreq_governor_mutex); | |
| ret = request_module("cpufreq_%s", str_governor); | |
| mutex_lock(&cpufreq_governor_mutex); | |
| if (ret == 0) | |
| t = __find_governor(str_governor); | |
| } | |
| if (t != NULL) { | |
| *governor = t; | |
| err = 0; | |
| } | |
| mutex_unlock(&cpufreq_governor_mutex); | |
| } | |
| out: | |
| return err; | |
| } | |
| /** | |
| * cpufreq_per_cpu_attr_read() / show_##file_name() - | |
| * print out cpufreq information | |
| * | |
| * Write out information from cpufreq_driver->policy[cpu]; object must be | |
| * "unsigned int". | |
| */ | |
| #define show_one(file_name, object) \ | |
| static ssize_t show_##file_name \ | |
| (struct cpufreq_policy *policy, char *buf) \ | |
| { \ | |
| return sprintf(buf, "%u\n", policy->object); \ | |
| } | |
| show_one(cpuinfo_min_freq, cpuinfo.min_freq); | |
| show_one(cpuinfo_max_freq, cpuinfo.max_freq); | |
| show_one(cpuinfo_transition_latency, cpuinfo.transition_latency); | |
| show_one(scaling_min_freq, min); | |
| show_one(scaling_max_freq, max); | |
| show_one(scaling_cur_freq, cur); | |
| static int __cpufreq_set_policy(struct cpufreq_policy *data, | |
| struct cpufreq_policy *policy); | |
| /** | |
| * cpufreq_per_cpu_attr_write() / store_##file_name() - sysfs write access | |
| */ | |
| #define store_one(file_name, object) \ | |
| static ssize_t store_##file_name \ | |
| (struct cpufreq_policy *policy, const char *buf, size_t count) \ | |
| { \ | |
| unsigned int ret = -EINVAL; \ | |
| struct cpufreq_policy new_policy; \ | |
| \ | |
| ret = cpufreq_get_policy(&new_policy, policy->cpu); \ | |
| if (ret) \ | |
| return -EINVAL; \ | |
| \ | |
| ret = sscanf(buf, "%u", &new_policy.object); \ | |
| if (ret != 1) \ | |
| return -EINVAL; \ | |
| \ | |
| ret = __cpufreq_set_policy(policy, &new_policy); \ | |
| policy->user_policy.object = policy->object; \ | |
| \ | |
| return ret ? ret : count; \ | |
| } | |
| store_one(scaling_min_freq, min); | |
| store_one(scaling_max_freq, max); | |
| /** | |
| * show_cpuinfo_cur_freq - current CPU frequency as detected by hardware | |
| */ | |
| static ssize_t show_cpuinfo_cur_freq(struct cpufreq_policy *policy, | |
| char *buf) | |
| { | |
| unsigned int cur_freq = __cpufreq_get(policy->cpu); | |
| if (!cur_freq) | |
| return sprintf(buf, "<unknown>"); | |
| return sprintf(buf, "%u\n", cur_freq); | |
| } | |
| /** | |
| * show_scaling_governor - show the current policy for the specified CPU | |
| */ | |
| static ssize_t show_scaling_governor(struct cpufreq_policy *policy, char *buf) | |
| { | |
| if (policy->policy == CPUFREQ_POLICY_POWERSAVE) | |
| return sprintf(buf, "powersave\n"); | |
| else if (policy->policy == CPUFREQ_POLICY_PERFORMANCE) | |
| return sprintf(buf, "performance\n"); | |
| else if (policy->governor) | |
| return scnprintf(buf, CPUFREQ_NAME_LEN, "%s\n", | |
| policy->governor->name); | |
| return -EINVAL; | |
| } | |
| /** | |
| * store_scaling_governor - store policy for the specified CPU | |
| */ | |
| static ssize_t store_scaling_governor(struct cpufreq_policy *policy, | |
| const char *buf, size_t count) | |
| { | |
| unsigned int ret = -EINVAL; | |
| char str_governor[16]; | |
| struct cpufreq_policy new_policy; | |
| ret = cpufreq_get_policy(&new_policy, policy->cpu); | |
| if (ret) | |
| return ret; | |
| ret = sscanf(buf, "%15s", str_governor); | |
| if (ret != 1) | |
| return -EINVAL; | |
| if (cpufreq_parse_governor(str_governor, &new_policy.policy, | |
| &new_policy.governor)) | |
| return -EINVAL; | |
| /* Do not use cpufreq_set_policy here or the user_policy.max | |
| will be wrongly overridden */ | |
| ret = __cpufreq_set_policy(policy, &new_policy); | |
| policy->user_policy.policy = policy->policy; | |
| policy->user_policy.governor = policy->governor; | |
| if (ret) | |
| return ret; | |
| else | |
| return count; | |
| } | |
| /** | |
| * show_scaling_driver - show the cpufreq driver currently loaded | |
| */ | |
| static ssize_t show_scaling_driver(struct cpufreq_policy *policy, char *buf) | |
| { | |
| return scnprintf(buf, CPUFREQ_NAME_LEN, "%s\n", cpufreq_driver->name); | |
| } | |
| /** | |
| * show_scaling_available_governors - show the available CPUfreq governors | |
| */ | |
| static ssize_t show_scaling_available_governors(struct cpufreq_policy *policy, | |
| char *buf) | |
| { | |
| ssize_t i = 0; | |
| struct cpufreq_governor *t; | |
| if (!cpufreq_driver->target) { | |
| i += sprintf(buf, "performance powersave"); | |
| goto out; | |
| } | |
| list_for_each_entry(t, &cpufreq_governor_list, governor_list) { | |
| if (i >= (ssize_t) ((PAGE_SIZE / sizeof(char)) | |
| - (CPUFREQ_NAME_LEN + 2))) | |
| goto out; | |
| i += scnprintf(&buf[i], CPUFREQ_NAME_LEN, "%s ", t->name); | |
| } | |
| out: | |
| i += sprintf(&buf[i], "\n"); | |
| return i; | |
| } | |
| static ssize_t show_cpus(const struct cpumask *mask, char *buf) | |
| { | |
| ssize_t i = 0; | |
| unsigned int cpu; | |
| for_each_cpu(cpu, mask) { | |
| if (i) | |
| i += scnprintf(&buf[i], (PAGE_SIZE - i - 2), " "); | |
| i += scnprintf(&buf[i], (PAGE_SIZE - i - 2), "%u", cpu); | |
| if (i >= (PAGE_SIZE - 5)) | |
| break; | |
| } | |
| i += sprintf(&buf[i], "\n"); | |
| return i; | |
| } | |
| /** | |
| * show_related_cpus - show the CPUs affected by each transition even if | |
| * hw coordination is in use | |
| */ | |
| static ssize_t show_related_cpus(struct cpufreq_policy *policy, char *buf) | |
| { | |
| if (cpumask_empty(policy->related_cpus)) | |
| return show_cpus(policy->cpus, buf); | |
| return show_cpus(policy->related_cpus, buf); | |
| } | |
| /** | |
| * show_affected_cpus - show the CPUs affected by each transition | |
| */ | |
| static ssize_t show_affected_cpus(struct cpufreq_policy *policy, char *buf) | |
| { | |
| return show_cpus(policy->cpus, buf); | |
| } | |
| static ssize_t store_scaling_setspeed(struct cpufreq_policy *policy, | |
| const char *buf, size_t count) | |
| { | |
| unsigned int freq = 0; | |
| unsigned int ret; | |
| if (!policy->governor || !policy->governor->store_setspeed) | |
| return -EINVAL; | |
| ret = sscanf(buf, "%u", &freq); | |
| if (ret != 1) | |
| return -EINVAL; | |
| policy->governor->store_setspeed(policy, freq); | |
| return count; | |
| } | |
| static ssize_t show_scaling_setspeed(struct cpufreq_policy *policy, char *buf) | |
| { | |
| if (!policy->governor || !policy->governor->show_setspeed) | |
| return sprintf(buf, "<unsupported>\n"); | |
| return policy->governor->show_setspeed(policy, buf); | |
| } | |
| /** | |
| * show_scaling_driver - show the current cpufreq HW/BIOS limitation | |
| */ | |
| static ssize_t show_bios_limit(struct cpufreq_policy *policy, char *buf) | |
| { | |
| unsigned int limit; | |
| int ret; | |
| if (cpufreq_driver->bios_limit) { | |
| ret = cpufreq_driver->bios_limit(policy->cpu, &limit); | |
| if (!ret) | |
| return sprintf(buf, "%u\n", limit); | |
| } | |
| return sprintf(buf, "%u\n", policy->cpuinfo.max_freq); | |
| } | |
| cpufreq_freq_attr_ro_perm(cpuinfo_cur_freq, 0400); | |
| cpufreq_freq_attr_ro(cpuinfo_min_freq); | |
| cpufreq_freq_attr_ro(cpuinfo_max_freq); | |
| cpufreq_freq_attr_ro(cpuinfo_transition_latency); | |
| cpufreq_freq_attr_ro(scaling_available_governors); | |
| cpufreq_freq_attr_ro(scaling_driver); | |
| cpufreq_freq_attr_ro(scaling_cur_freq); | |
| cpufreq_freq_attr_ro(bios_limit); | |
| cpufreq_freq_attr_ro(related_cpus); | |
| cpufreq_freq_attr_ro(affected_cpus); | |
| cpufreq_freq_attr_rw(scaling_min_freq); | |
| cpufreq_freq_attr_rw(scaling_max_freq); | |
| cpufreq_freq_attr_rw(scaling_governor); | |
| cpufreq_freq_attr_rw(scaling_setspeed); | |
| static struct attribute *default_attrs[] = { | |
| &cpuinfo_min_freq.attr, | |
| &cpuinfo_max_freq.attr, | |
| &cpuinfo_transition_latency.attr, | |
| &scaling_min_freq.attr, | |
| &scaling_max_freq.attr, | |
| &affected_cpus.attr, | |
| &related_cpus.attr, | |
| &scaling_governor.attr, | |
| &scaling_driver.attr, | |
| &scaling_available_governors.attr, | |
| &scaling_setspeed.attr, | |
| NULL | |
| }; | |
| struct kobject *cpufreq_global_kobject; | |
| EXPORT_SYMBOL(cpufreq_global_kobject); | |
| #define to_policy(k) container_of(k, struct cpufreq_policy, kobj) | |
| #define to_attr(a) container_of(a, struct freq_attr, attr) | |
| static ssize_t show(struct kobject *kobj, struct attribute *attr, char *buf) | |
| { | |
| struct cpufreq_policy *policy = to_policy(kobj); | |
| struct freq_attr *fattr = to_attr(attr); | |
| ssize_t ret = -EINVAL; | |
| policy = cpufreq_cpu_get(policy->cpu); | |
| if (!policy) | |
| goto no_policy; | |
| if (lock_policy_rwsem_read(policy->cpu) < 0) | |
| goto fail; | |
| if (fattr->show) | |
| ret = fattr->show(policy, buf); | |
| else | |
| ret = -EIO; | |
| unlock_policy_rwsem_read(policy->cpu); | |
| fail: | |
| cpufreq_cpu_put(policy); | |
| no_policy: | |
| return ret; | |
| } | |
| static ssize_t store(struct kobject *kobj, struct attribute *attr, | |
| const char *buf, size_t count) | |
| { | |
| struct cpufreq_policy *policy = to_policy(kobj); | |
| struct freq_attr *fattr = to_attr(attr); | |
| ssize_t ret = -EINVAL; | |
| policy = cpufreq_cpu_get(policy->cpu); | |
| if (!policy) | |
| goto no_policy; | |
| if (lock_policy_rwsem_write(policy->cpu) < 0) | |
| goto fail; | |
| if (fattr->store) | |
| ret = fattr->store(policy, buf, count); | |
| else | |
| ret = -EIO; | |
| unlock_policy_rwsem_write(policy->cpu); | |
| fail: | |
| cpufreq_cpu_put(policy); | |
| no_policy: | |
| return ret; | |
| } | |
| static void cpufreq_sysfs_release(struct kobject *kobj) | |
| { | |
| struct cpufreq_policy *policy = to_policy(kobj); | |
| pr_debug("last reference is dropped\n"); | |
| complete(&policy->kobj_unregister); | |
| } | |
| static const struct sysfs_ops sysfs_ops = { | |
| .show = show, | |
| .store = store, | |
| }; | |
| static struct kobj_type ktype_cpufreq = { | |
| .sysfs_ops = &sysfs_ops, | |
| .default_attrs = default_attrs, | |
| .release = cpufreq_sysfs_release, | |
| }; | |
| /* | |
| * Returns: | |
| * Negative: Failure | |
| * 0: Success | |
| * Positive: When we have a managed CPU and the sysfs got symlinked | |
| */ | |
| static int cpufreq_add_dev_policy(unsigned int cpu, | |
| struct cpufreq_policy *policy, | |
| struct sys_device *sys_dev) | |
| { | |
| int ret = 0; | |
| #ifdef CONFIG_SMP | |
| unsigned long flags; | |
| unsigned int j; | |
| #ifdef CONFIG_HOTPLUG_CPU | |
| struct cpufreq_governor *gov; | |
| gov = __find_governor(per_cpu(cpufreq_cpu_governor, cpu)); | |
| if (gov) { | |
| policy->governor = gov; | |
| pr_debug("Restoring governor %s for cpu %d\n", | |
| policy->governor->name, cpu); | |
| } | |
| #endif | |
| for_each_cpu(j, policy->cpus) { | |
| struct cpufreq_policy *managed_policy; | |
| if (cpu == j) | |
| continue; | |
| /* Check for existing affected CPUs. | |
| * They may not be aware of it due to CPU Hotplug. | |
| * cpufreq_cpu_put is called when the device is removed | |
| * in __cpufreq_remove_dev() | |
| */ | |
| managed_policy = cpufreq_cpu_get(j); | |
| if (unlikely(managed_policy)) { | |
| /* Set proper policy_cpu */ | |
| unlock_policy_rwsem_write(cpu); | |
| per_cpu(cpufreq_policy_cpu, cpu) = managed_policy->cpu; | |
| if (lock_policy_rwsem_write(cpu) < 0) { | |
| /* Should not go through policy unlock path */ | |
| if (cpufreq_driver->exit) | |
| cpufreq_driver->exit(policy); | |
| cpufreq_cpu_put(managed_policy); | |
| return -EBUSY; | |
| } | |
| spin_lock_irqsave(&cpufreq_driver_lock, flags); | |
| cpumask_copy(managed_policy->cpus, policy->cpus); | |
| per_cpu(cpufreq_cpu_data, cpu) = managed_policy; | |
| spin_unlock_irqrestore(&cpufreq_driver_lock, flags); | |
| pr_debug("CPU already managed, adding link\n"); | |
| ret = sysfs_create_link(&sys_dev->kobj, | |
| &managed_policy->kobj, | |
| "cpufreq"); | |
| if (ret) | |
| cpufreq_cpu_put(managed_policy); | |
| /* | |
| * Success. We only needed to be added to the mask. | |
| * Call driver->exit() because only the cpu parent of | |
| * the kobj needed to call init(). | |
| */ | |
| if (cpufreq_driver->exit) | |
| cpufreq_driver->exit(policy); | |
| if (!ret) | |
| return 1; | |
| else | |
| return ret; | |
| } | |
| } | |
| #endif | |
| return ret; | |
| } | |
| /* symlink affected CPUs */ | |
| static int cpufreq_add_dev_symlink(unsigned int cpu, | |
| struct cpufreq_policy *policy) | |
| { | |
| unsigned int j; | |
| int ret = 0; | |
| for_each_cpu(j, policy->cpus) { | |
| struct cpufreq_policy *managed_policy; | |
| struct sys_device *cpu_sys_dev; | |
| if (j == cpu) | |
| continue; | |
| if (!cpu_online(j)) | |
| continue; | |
| pr_debug("CPU %u already managed, adding link\n", j); | |
| managed_policy = cpufreq_cpu_get(cpu); | |
| cpu_sys_dev = get_cpu_sysdev(j); | |
| ret = sysfs_create_link(&cpu_sys_dev->kobj, &policy->kobj, | |
| "cpufreq"); | |
| if (ret) { | |
| cpufreq_cpu_put(managed_policy); | |
| return ret; | |
| } | |
| } | |
| return ret; | |
| } | |
| static int cpufreq_add_dev_interface(unsigned int cpu, | |
| struct cpufreq_policy *policy, | |
| struct sys_device *sys_dev) | |
| { | |
| struct cpufreq_policy new_policy; | |
| struct freq_attr **drv_attr; | |
| unsigned long flags; | |
| int ret = 0; | |
| unsigned int j; | |
| /* prepare interface data */ | |
| ret = kobject_init_and_add(&policy->kobj, &ktype_cpufreq, | |
| &sys_dev->kobj, "cpufreq"); | |
| if (ret) | |
| return ret; | |
| /* set up files for this cpu device */ | |
| drv_attr = cpufreq_driver->attr; | |
| while ((drv_attr) && (*drv_attr)) { | |
| ret = sysfs_create_file(&policy->kobj, &((*drv_attr)->attr)); | |
| if (ret) | |
| goto err_out_kobj_put; | |
| drv_attr++; | |
| } | |
| if (cpufreq_driver->get) { | |
| ret = sysfs_create_file(&policy->kobj, &cpuinfo_cur_freq.attr); | |
| if (ret) | |
| goto err_out_kobj_put; | |
| } | |
| if (cpufreq_driver->target) { | |
| ret = sysfs_create_file(&policy->kobj, &scaling_cur_freq.attr); | |
| if (ret) | |
| goto err_out_kobj_put; | |
| } | |
| if (cpufreq_driver->bios_limit) { | |
| ret = sysfs_create_file(&policy->kobj, &bios_limit.attr); | |
| if (ret) | |
| goto err_out_kobj_put; | |
| } | |
| spin_lock_irqsave(&cpufreq_driver_lock, flags); | |
| for_each_cpu(j, policy->cpus) { | |
| if (!cpu_online(j)) | |
| continue; | |
| per_cpu(cpufreq_cpu_data, j) = policy; | |
| per_cpu(cpufreq_policy_cpu, j) = policy->cpu; | |
| } | |
| spin_unlock_irqrestore(&cpufreq_driver_lock, flags); | |
| ret = cpufreq_add_dev_symlink(cpu, policy); | |
| if (ret) | |
| goto err_out_kobj_put; | |
| memcpy(&new_policy, policy, sizeof(struct cpufreq_policy)); | |
| /* assure that the starting sequence is run in __cpufreq_set_policy */ | |
| policy->governor = NULL; | |
| /* set default policy */ | |
| ret = __cpufreq_set_policy(policy, &new_policy); | |
| policy->user_policy.policy = policy->policy; | |
| policy->user_policy.governor = policy->governor; | |
| if (ret) { | |
| pr_debug("setting policy failed\n"); | |
| if (cpufreq_driver->exit) | |
| cpufreq_driver->exit(policy); | |
| } | |
| return ret; | |
| err_out_kobj_put: | |
| kobject_put(&policy->kobj); | |
| wait_for_completion(&policy->kobj_unregister); | |
| return ret; | |
| } | |
| /** | |
| * cpufreq_add_dev - add a CPU device | |
| * | |
| * Adds the cpufreq interface for a CPU device. | |
| * | |
| * The Oracle says: try running cpufreq registration/unregistration concurrently | |
| * with with cpu hotplugging and all hell will break loose. Tried to clean this | |
| * mess up, but more thorough testing is needed. - Mathieu | |
| */ | |
| static int cpufreq_add_dev(struct sys_device *sys_dev) | |
| { | |
| unsigned int cpu = sys_dev->id; | |
| int ret = 0, found = 0; | |
| struct cpufreq_policy *policy; | |
| unsigned long flags; | |
| unsigned int j; | |
| #ifdef CONFIG_HOTPLUG_CPU | |
| int sibling; | |
| #endif | |
| if (cpu_is_offline(cpu)) | |
| return 0; | |
| pr_debug("adding CPU %u\n", cpu); | |
| #ifdef CONFIG_SMP | |
| /* check whether a different CPU already registered this | |
| * CPU because it is in the same boat. */ | |
| policy = cpufreq_cpu_get(cpu); | |
| if (unlikely(policy)) { | |
| cpufreq_cpu_put(policy); | |
| return 0; | |
| } | |
| #endif | |
| if (!try_module_get(cpufreq_driver->owner)) { | |
| ret = -EINVAL; | |
| goto module_out; | |
| } | |
| ret = -ENOMEM; | |
| policy = kzalloc(sizeof(struct cpufreq_policy), GFP_KERNEL); | |
| if (!policy) | |
| goto nomem_out; | |
| if (!alloc_cpumask_var(&policy->cpus, GFP_KERNEL)) | |
| goto err_free_policy; | |
| if (!zalloc_cpumask_var(&policy->related_cpus, GFP_KERNEL)) | |
| goto err_free_cpumask; | |
| policy->cpu = cpu; | |
| cpumask_copy(policy->cpus, cpumask_of(cpu)); | |
| /* Initially set CPU itself as the policy_cpu */ | |
| per_cpu(cpufreq_policy_cpu, cpu) = cpu; | |
| ret = (lock_policy_rwsem_write(cpu) < 0); | |
| WARN_ON(ret); | |
| init_completion(&policy->kobj_unregister); | |
| INIT_WORK(&policy->update, handle_update); | |
| /* Set governor before ->init, so that driver could check it */ | |
| #ifdef CONFIG_HOTPLUG_CPU | |
| for_each_online_cpu(sibling) { | |
| struct cpufreq_policy *cp = per_cpu(cpufreq_cpu_data, sibling); | |
| if (cp && cp->governor && | |
| (cpumask_test_cpu(cpu, cp->related_cpus))) { | |
| policy->governor = cp->governor; | |
| found = 1; | |
| break; | |
| } | |
| } | |
| #endif | |
| if (!found) | |
| policy->governor = CPUFREQ_DEFAULT_GOVERNOR; | |
| /* call driver. From then on the cpufreq must be able | |
| * to accept all calls to ->verify and ->setpolicy for this CPU | |
| */ | |
| ret = cpufreq_driver->init(policy); | |
| if (ret) { | |
| pr_debug("initialization failed\n"); | |
| goto err_unlock_policy; | |
| } | |
| policy->user_policy.min = policy->min; | |
| policy->user_policy.max = policy->max; | |
| blocking_notifier_call_chain(&cpufreq_policy_notifier_list, | |
| CPUFREQ_START, policy); | |
| ret = cpufreq_add_dev_policy(cpu, policy, sys_dev); | |
| if (ret) { | |
| if (ret > 0) | |
| /* This is a managed cpu, symlink created, | |
| exit with 0 */ | |
| ret = 0; | |
| goto err_unlock_policy; | |
| } | |
| ret = cpufreq_add_dev_interface(cpu, policy, sys_dev); | |
| if (ret) | |
| goto err_out_unregister; | |
| unlock_policy_rwsem_write(cpu); | |
| kobject_uevent(&policy->kobj, KOBJ_ADD); | |
| module_put(cpufreq_driver->owner); | |
| pr_debug("initialization complete\n"); | |
| return 0; | |
| err_out_unregister: | |
| spin_lock_irqsave(&cpufreq_driver_lock, flags); | |
| for_each_cpu(j, policy->cpus) | |
| per_cpu(cpufreq_cpu_data, j) = NULL; | |
| spin_unlock_irqrestore(&cpufreq_driver_lock, flags); | |
| kobject_put(&policy->kobj); | |
| wait_for_completion(&policy->kobj_unregister); | |
| err_unlock_policy: | |
| unlock_policy_rwsem_write(cpu); | |
| free_cpumask_var(policy->related_cpus); | |
| err_free_cpumask: | |
| free_cpumask_var(policy->cpus); | |
| err_free_policy: | |
| kfree(policy); | |
| nomem_out: | |
| module_put(cpufreq_driver->owner); | |
| module_out: | |
| return ret; | |
| } | |
| /** | |
| * __cpufreq_remove_dev - remove a CPU device | |
| * | |
| * Removes the cpufreq interface for a CPU device. | |
| * Caller should already have policy_rwsem in write mode for this CPU. | |
| * This routine frees the rwsem before returning. | |
| */ | |
| static int __cpufreq_remove_dev(struct sys_device *sys_dev) | |
| { | |
| unsigned int cpu = sys_dev->id; | |
| unsigned long flags; | |
| struct cpufreq_policy *data; | |
| struct kobject *kobj; | |
| struct completion *cmp; | |
| #ifdef CONFIG_SMP | |
| struct sys_device *cpu_sys_dev; | |
| unsigned int j; | |
| #endif | |
| pr_debug("unregistering CPU %u\n", cpu); | |
| spin_lock_irqsave(&cpufreq_driver_lock, flags); | |
| data = per_cpu(cpufreq_cpu_data, cpu); | |
| if (!data) { | |
| spin_unlock_irqrestore(&cpufreq_driver_lock, flags); | |
| unlock_policy_rwsem_write(cpu); | |
| return -EINVAL; | |
| } | |
| per_cpu(cpufreq_cpu_data, cpu) = NULL; | |
| #ifdef CONFIG_SMP | |
| /* if this isn't the CPU which is the parent of the kobj, we | |
| * only need to unlink, put and exit | |
| */ | |
| if (unlikely(cpu != data->cpu)) { | |
| pr_debug("removing link\n"); | |
| cpumask_clear_cpu(cpu, data->cpus); | |
| spin_unlock_irqrestore(&cpufreq_driver_lock, flags); | |
| kobj = &sys_dev->kobj; | |
| cpufreq_cpu_put(data); | |
| unlock_policy_rwsem_write(cpu); | |
| sysfs_remove_link(kobj, "cpufreq"); | |
| return 0; | |
| } | |
| #endif | |
| #ifdef CONFIG_SMP | |
| #ifdef CONFIG_HOTPLUG_CPU | |
| strncpy(per_cpu(cpufreq_cpu_governor, cpu), data->governor->name, | |
| CPUFREQ_NAME_LEN); | |
| #endif | |
| /* if we have other CPUs still registered, we need to unlink them, | |
| * or else wait_for_completion below will lock up. Clean the | |
| * per_cpu(cpufreq_cpu_data) while holding the lock, and remove | |
| * the sysfs links afterwards. | |
| */ | |
| if (unlikely(cpumask_weight(data->cpus) > 1)) { | |
| for_each_cpu(j, data->cpus) { | |
| if (j == cpu) | |
| continue; | |
| per_cpu(cpufreq_cpu_data, j) = NULL; | |
| } | |
| } | |
| spin_unlock_irqrestore(&cpufreq_driver_lock, flags); | |
| if (unlikely(cpumask_weight(data->cpus) > 1)) { | |
| for_each_cpu(j, data->cpus) { | |
| if (j == cpu) | |
| continue; | |
| pr_debug("removing link for cpu %u\n", j); | |
| #ifdef CONFIG_HOTPLUG_CPU | |
| strncpy(per_cpu(cpufreq_cpu_governor, j), | |
| data->governor->name, CPUFREQ_NAME_LEN); | |
| #endif | |
| cpu_sys_dev = get_cpu_sysdev(j); | |
| kobj = &cpu_sys_dev->kobj; | |
| unlock_policy_rwsem_write(cpu); | |
| sysfs_remove_link(kobj, "cpufreq"); | |
| lock_policy_rwsem_write(cpu); | |
| cpufreq_cpu_put(data); | |
| } | |
| } | |
| #else | |
| spin_unlock_irqrestore(&cpufreq_driver_lock, flags); | |
| #endif | |
| if (cpufreq_driver->target) | |
| __cpufreq_governor(data, CPUFREQ_GOV_STOP); | |
| kobj = &data->kobj; | |
| cmp = &data->kobj_unregister; | |
| unlock_policy_rwsem_write(cpu); | |
| kobject_put(kobj); | |
| /* we need to make sure that the underlying kobj is actually | |
| * not referenced anymore by anybody before we proceed with | |
| * unloading. | |
| */ | |
| pr_debug("waiting for dropping of refcount\n"); | |
| wait_for_completion(cmp); | |
| pr_debug("wait complete\n"); | |
| lock_policy_rwsem_write(cpu); | |
| if (cpufreq_driver->exit) | |
| cpufreq_driver->exit(data); | |
| unlock_policy_rwsem_write(cpu); | |
| #ifdef CONFIG_HOTPLUG_CPU | |
| /* when the CPU which is the parent of the kobj is hotplugged | |
| * offline, check for siblings, and create cpufreq sysfs interface | |
| * and symlinks | |
| */ | |
| if (unlikely(cpumask_weight(data->cpus) > 1)) { | |
| /* first sibling now owns the new sysfs dir */ | |
| cpumask_clear_cpu(cpu, data->cpus); | |
| cpufreq_add_dev(get_cpu_sysdev(cpumask_first(data->cpus))); | |
| /* finally remove our own symlink */ | |
| lock_policy_rwsem_write(cpu); | |
| __cpufreq_remove_dev(sys_dev); | |
| } | |
| #endif | |
| free_cpumask_var(data->related_cpus); | |
| free_cpumask_var(data->cpus); | |
| kfree(data); | |
| return 0; | |
| } | |
| static int cpufreq_remove_dev(struct sys_device *sys_dev) | |
| { | |
| unsigned int cpu = sys_dev->id; | |
| int retval; | |
| if (cpu_is_offline(cpu)) | |
| return 0; | |
| if (unlikely(lock_policy_rwsem_write(cpu))) | |
| BUG(); | |
| retval = __cpufreq_remove_dev(sys_dev); | |
| return retval; | |
| } | |
| static void handle_update(struct work_struct *work) | |
| { | |
| struct cpufreq_policy *policy = | |
| container_of(work, struct cpufreq_policy, update); | |
| unsigned int cpu = policy->cpu; | |
| pr_debug("handle_update for cpu %u called\n", cpu); | |
| cpufreq_update_policy(cpu); | |
| } | |
| /** | |
| * cpufreq_out_of_sync - If actual and saved CPU frequency differs, we're in deep trouble. | |
| * @cpu: cpu number | |
| * @old_freq: CPU frequency the kernel thinks the CPU runs at | |
| * @new_freq: CPU frequency the CPU actually runs at | |
| * | |
| * We adjust to current frequency first, and need to clean up later. | |
| * So either call to cpufreq_update_policy() or schedule handle_update()). | |
| */ | |
| static void cpufreq_out_of_sync(unsigned int cpu, unsigned int old_freq, | |
| unsigned int new_freq) | |
| { | |
| struct cpufreq_freqs freqs; | |
| pr_debug("Warning: CPU frequency out of sync: cpufreq and timing " | |
| "core thinks of %u, is %u kHz.\n", old_freq, new_freq); | |
| freqs.cpu = cpu; | |
| freqs.old = old_freq; | |
| freqs.new = new_freq; | |
| cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); | |
| cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); | |
| } | |
| /** | |
| * cpufreq_quick_get - get the CPU frequency (in kHz) from policy->cur | |
| * @cpu: CPU number | |
| * | |
| * This is the last known freq, without actually getting it from the driver. | |
| * Return value will be same as what is shown in scaling_cur_freq in sysfs. | |
| */ | |
| unsigned int cpufreq_quick_get(unsigned int cpu) | |
| { | |
| struct cpufreq_policy *policy = cpufreq_cpu_get(cpu); | |
| unsigned int ret_freq = 0; | |
| if (policy) { | |
| ret_freq = policy->cur; | |
| cpufreq_cpu_put(policy); | |
| } | |
| return ret_freq; | |
| } | |
| EXPORT_SYMBOL(cpufreq_quick_get); | |
| static unsigned int __cpufreq_get(unsigned int cpu) | |
| { | |
| struct cpufreq_policy *policy = per_cpu(cpufreq_cpu_data, cpu); | |
| unsigned int ret_freq = 0; | |
| if (!cpufreq_driver->get) | |
| return ret_freq; | |
| ret_freq = cpufreq_driver->get(cpu); | |
| if (ret_freq && policy->cur && | |
| !(cpufreq_driver->flags & CPUFREQ_CONST_LOOPS)) { | |
| /* verify no discrepancy between actual and | |
| saved value exists */ | |
| if (unlikely(ret_freq != policy->cur)) { | |
| cpufreq_out_of_sync(cpu, policy->cur, ret_freq); | |
| schedule_work(&policy->update); | |
| } | |
| } | |
| return ret_freq; | |
| } | |
| /** | |
| * cpufreq_get - get the current CPU frequency (in kHz) | |
| * @cpu: CPU number | |
| * | |
| * Get the CPU current (static) CPU frequency | |
| */ | |
| unsigned int cpufreq_get(unsigned int cpu) | |
| { | |
| unsigned int ret_freq = 0; | |
| struct cpufreq_policy *policy = cpufreq_cpu_get(cpu); | |
| if (!policy) | |
| goto out; | |
| if (unlikely(lock_policy_rwsem_read(cpu))) | |
| goto out_policy; | |
| ret_freq = __cpufreq_get(cpu); | |
| unlock_policy_rwsem_read(cpu); | |
| out_policy: | |
| cpufreq_cpu_put(policy); | |
| out: | |
| return ret_freq; | |
| } | |
| EXPORT_SYMBOL(cpufreq_get); | |
| static struct sysdev_driver cpufreq_sysdev_driver = { | |
| .add = cpufreq_add_dev, | |
| .remove = cpufreq_remove_dev, | |
| }; | |
| /** | |
| * cpufreq_bp_suspend - Prepare the boot CPU for system suspend. | |
| * | |
| * This function is only executed for the boot processor. The other CPUs | |
| * have been put offline by means of CPU hotplug. | |
| */ | |
| static int cpufreq_bp_suspend(void) | |
| { | |
| int ret = 0; | |
| int cpu = smp_processor_id(); | |
| struct cpufreq_policy *cpu_policy; | |
| pr_debug("suspending cpu %u\n", cpu); | |
| /* If there's no policy for the boot CPU, we have nothing to do. */ | |
| cpu_policy = cpufreq_cpu_get(cpu); | |
| if (!cpu_policy) | |
| return 0; | |
| if (cpufreq_driver->suspend) { | |
| ret = cpufreq_driver->suspend(cpu_policy); | |
| if (ret) | |
| printk(KERN_ERR "cpufreq: suspend failed in ->suspend " | |
| "step on CPU %u\n", cpu_policy->cpu); | |
| } | |
| cpufreq_cpu_put(cpu_policy); | |
| return ret; | |
| } | |
| /** | |
| * cpufreq_bp_resume - Restore proper frequency handling of the boot CPU. | |
| * | |
| * 1.) resume CPUfreq hardware support (cpufreq_driver->resume()) | |
| * 2.) schedule call cpufreq_update_policy() ASAP as interrupts are | |
| * restored. It will verify that the current freq is in sync with | |
| * what we believe it to be. This is a bit later than when it | |
| * should be, but nonethteless it's better than calling | |
| * cpufreq_driver->get() here which might re-enable interrupts... | |
| * | |
| * This function is only executed for the boot CPU. The other CPUs have not | |
| * been turned on yet. | |
| */ | |
| static void cpufreq_bp_resume(void) | |
| { | |
| int ret = 0; | |
| int cpu = smp_processor_id(); | |
| struct cpufreq_policy *cpu_policy; | |
| pr_debug("resuming cpu %u\n", cpu); | |
| /* If there's no policy for the boot CPU, we have nothing to do. */ | |
| cpu_policy = cpufreq_cpu_get(cpu); | |
| if (!cpu_policy) | |
| return; | |
| if (cpufreq_driver->resume) { | |
| ret = cpufreq_driver->resume(cpu_policy); | |
| if (ret) { | |
| printk(KERN_ERR "cpufreq: resume failed in ->resume " | |
| "step on CPU %u\n", cpu_policy->cpu); | |
| goto fail; | |
| } | |
| } | |
| schedule_work(&cpu_policy->update); | |
| fail: | |
| cpufreq_cpu_put(cpu_policy); | |
| } | |
| static struct syscore_ops cpufreq_syscore_ops = { | |
| .suspend = cpufreq_bp_suspend, | |
| .resume = cpufreq_bp_resume, | |
| }; | |
| /********************************************************************* | |
| * NOTIFIER LISTS INTERFACE * | |
| *********************************************************************/ | |
| /** | |
| * cpufreq_register_notifier - register a driver with cpufreq | |
| * @nb: notifier function to register | |
| * @list: CPUFREQ_TRANSITION_NOTIFIER or CPUFREQ_POLICY_NOTIFIER | |
| * | |
| * Add a driver to one of two lists: either a list of drivers that | |
| * are notified about clock rate changes (once before and once after | |
| * the transition), or a list of drivers that are notified about | |
| * changes in cpufreq policy. | |
| * | |
| * This function may sleep, and has the same return conditions as | |
| * blocking_notifier_chain_register. | |
| */ | |
| int cpufreq_register_notifier(struct notifier_block *nb, unsigned int list) | |
| { | |
| int ret; | |
| WARN_ON(!init_cpufreq_transition_notifier_list_called); | |
| switch (list) { | |
| case CPUFREQ_TRANSITION_NOTIFIER: | |
| ret = srcu_notifier_chain_register( | |
| &cpufreq_transition_notifier_list, nb); | |
| break; | |
| case CPUFREQ_POLICY_NOTIFIER: | |
| ret = blocking_notifier_chain_register( | |
| &cpufreq_policy_notifier_list, nb); | |
| break; | |
| default: | |
| ret = -EINVAL; | |
| } | |
| return ret; | |
| } | |
| EXPORT_SYMBOL(cpufreq_register_notifier); | |
| /** | |
| * cpufreq_unregister_notifier - unregister a driver with cpufreq | |
| * @nb: notifier block to be unregistered | |
| * @list: CPUFREQ_TRANSITION_NOTIFIER or CPUFREQ_POLICY_NOTIFIER | |
| * | |
| * Remove a driver from the CPU frequency notifier list. | |
| * | |
| * This function may sleep, and has the same return conditions as | |
| * blocking_notifier_chain_unregister. | |
| */ | |
| int cpufreq_unregister_notifier(struct notifier_block *nb, unsigned int list) | |
| { | |
| int ret; | |
| switch (list) { | |
| case CPUFREQ_TRANSITION_NOTIFIER: | |
| ret = srcu_notifier_chain_unregister( | |
| &cpufreq_transition_notifier_list, nb); | |
| break; | |
| case CPUFREQ_POLICY_NOTIFIER: | |
| ret = blocking_notifier_chain_unregister( | |
| &cpufreq_policy_notifier_list, nb); | |
| break; | |
| default: | |
| ret = -EINVAL; | |
| } | |
| return ret; | |
| } | |
| EXPORT_SYMBOL(cpufreq_unregister_notifier); | |
| /********************************************************************* | |
| * GOVERNORS * | |
| *********************************************************************/ | |
| int __cpufreq_driver_target(struct cpufreq_policy *policy, | |
| unsigned int target_freq, | |
| unsigned int relation) | |
| { | |
| int retval = -EINVAL; | |
| pr_debug("target for CPU %u: %u kHz, relation %u\n", policy->cpu, | |
| target_freq, relation); | |
| if (cpu_online(policy->cpu) && cpufreq_driver->target) | |
| retval = cpufreq_driver->target(policy, target_freq, relation); | |
| return retval; | |
| } | |
| EXPORT_SYMBOL_GPL(__cpufreq_driver_target); | |
| int cpufreq_driver_target(struct cpufreq_policy *policy, | |
| unsigned int target_freq, | |
| unsigned int relation) | |
| { | |
| int ret = -EINVAL; | |
| policy = cpufreq_cpu_get(policy->cpu); | |
| if (!policy) | |
| goto no_policy; | |
| if (unlikely(lock_policy_rwsem_write(policy->cpu))) | |
| goto fail; | |
| ret = __cpufreq_driver_target(policy, target_freq, relation); | |
| unlock_policy_rwsem_write(policy->cpu); | |
| fail: | |
| cpufreq_cpu_put(policy); | |
| no_policy: | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_GPL(cpufreq_driver_target); | |
| int __cpufreq_driver_getavg(struct cpufreq_policy *policy, unsigned int cpu) | |
| { | |
| int ret = 0; | |
| policy = cpufreq_cpu_get(policy->cpu); | |
| if (!policy) | |
| return -EINVAL; | |
| if (cpu_online(cpu) && cpufreq_driver->getavg) | |
| ret = cpufreq_driver->getavg(policy, cpu); | |
| cpufreq_cpu_put(policy); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_GPL(__cpufreq_driver_getavg); | |
| /* | |
| * when "event" is CPUFREQ_GOV_LIMITS | |
| */ | |
| static int __cpufreq_governor(struct cpufreq_policy *policy, | |
| unsigned int event) | |
| { | |
| int ret; | |
| /* Only must be defined when default governor is known to have latency | |
| restrictions, like e.g. conservative or ondemand. | |
| That this is the case is already ensured in Kconfig | |
| */ | |
| #ifdef CONFIG_CPU_FREQ_GOV_PERFORMANCE | |
| struct cpufreq_governor *gov = &cpufreq_gov_performance; | |
| #else | |
| struct cpufreq_governor *gov = NULL; | |
| #endif | |
| if (policy->governor->max_transition_latency && | |
| policy->cpuinfo.transition_latency > | |
| policy->governor->max_transition_latency) { | |
| if (!gov) | |
| return -EINVAL; | |
| else { | |
| printk(KERN_WARNING "%s governor failed, too long" | |
| " transition latency of HW, fallback" | |
| " to %s governor\n", | |
| policy->governor->name, | |
| gov->name); | |
| policy->governor = gov; | |
| } | |
| } | |
| if (!try_module_get(policy->governor->owner)) | |
| return -EINVAL; | |
| pr_debug("__cpufreq_governor for CPU %u, event %u\n", | |
| policy->cpu, event); | |
| ret = policy->governor->governor(policy, event); | |
| /* we keep one module reference alive for | |
| each CPU governed by this CPU */ | |
| if ((event != CPUFREQ_GOV_START) || ret) | |
| module_put(policy->governor->owner); | |
| if ((event == CPUFREQ_GOV_STOP) && !ret) | |
| module_put(policy->governor->owner); | |
| return ret; | |
| } | |
| int cpufreq_register_governor(struct cpufreq_governor *governor) | |
| { | |
| int err; | |
| if (!governor) | |
| return -EINVAL; | |
| mutex_lock(&cpufreq_governor_mutex); | |
| err = -EBUSY; | |
| if (__find_governor(governor->name) == NULL) { | |
| err = 0; | |
| list_add(&governor->governor_list, &cpufreq_governor_list); | |
| } | |
| mutex_unlock(&cpufreq_governor_mutex); | |
| return err; | |
| } | |
| EXPORT_SYMBOL_GPL(cpufreq_register_governor); | |
| void cpufreq_unregister_governor(struct cpufreq_governor *governor) | |
| { | |
| #ifdef CONFIG_HOTPLUG_CPU | |
| int cpu; | |
| #endif | |
| if (!governor) | |
| return; | |
| #ifdef CONFIG_HOTPLUG_CPU | |
| for_each_present_cpu(cpu) { | |
| if (cpu_online(cpu)) | |
| continue; | |
| if (!strcmp(per_cpu(cpufreq_cpu_governor, cpu), governor->name)) | |
| strcpy(per_cpu(cpufreq_cpu_governor, cpu), "\0"); | |
| } | |
| #endif | |
| mutex_lock(&cpufreq_governor_mutex); | |
| list_del(&governor->governor_list); | |
| mutex_unlock(&cpufreq_governor_mutex); | |
| return; | |
| } | |
| EXPORT_SYMBOL_GPL(cpufreq_unregister_governor); | |
| /********************************************************************* | |
| * POLICY INTERFACE * | |
| *********************************************************************/ | |
| /** | |
| * cpufreq_get_policy - get the current cpufreq_policy | |
| * @policy: struct cpufreq_policy into which the current cpufreq_policy | |
| * is written | |
| * | |
| * Reads the current cpufreq policy. | |
| */ | |
| int cpufreq_get_policy(struct cpufreq_policy *policy, unsigned int cpu) | |
| { | |
| struct cpufreq_policy *cpu_policy; | |
| if (!policy) | |
| return -EINVAL; | |
| cpu_policy = cpufreq_cpu_get(cpu); | |
| if (!cpu_policy) | |
| return -EINVAL; | |
| memcpy(policy, cpu_policy, sizeof(struct cpufreq_policy)); | |
| cpufreq_cpu_put(cpu_policy); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL(cpufreq_get_policy); | |
| /* | |
| * data : current policy. | |
| * policy : policy to be set. | |
| */ | |
| static int __cpufreq_set_policy(struct cpufreq_policy *data, | |
| struct cpufreq_policy *policy) | |
| { | |
| int ret = 0; | |
| pr_debug("setting new policy for CPU %u: %u - %u kHz\n", policy->cpu, | |
| policy->min, policy->max); | |
| memcpy(&policy->cpuinfo, &data->cpuinfo, | |
| sizeof(struct cpufreq_cpuinfo)); | |
| if (policy->min > data->max || policy->max < data->min) { | |
| ret = -EINVAL; | |
| goto error_out; | |
| } | |
| /* verify the cpu speed can be set within this limit */ | |
| ret = cpufreq_driver->verify(policy); | |
| if (ret) | |
| goto error_out; | |
| /* adjust if necessary - all reasons */ | |
| blocking_notifier_call_chain(&cpufreq_policy_notifier_list, | |
| CPUFREQ_ADJUST, policy); | |
| /* adjust if necessary - hardware incompatibility*/ | |
| blocking_notifier_call_chain(&cpufreq_policy_notifier_list, | |
| CPUFREQ_INCOMPATIBLE, policy); | |
| /* verify the cpu speed can be set within this limit, | |
| which might be different to the first one */ | |
| ret = cpufreq_driver->verify(policy); | |
| if (ret) | |
| goto error_out; | |
| /* notification of the new policy */ | |
| blocking_notifier_call_chain(&cpufreq_policy_notifier_list, | |
| CPUFREQ_NOTIFY, policy); | |
| data->min = policy->min; | |
| data->max = policy->max; | |
| pr_debug("new min and max freqs are %u - %u kHz\n", | |
| data->min, data->max); | |
| if (cpufreq_driver->setpolicy) { | |
| data->policy = policy->policy; | |
| pr_debug("setting range\n"); | |
| ret = cpufreq_driver->setpolicy(policy); | |
| } else { | |
| if (policy->governor != data->governor) { | |
| /* save old, working values */ | |
| struct cpufreq_governor *old_gov = data->governor; | |
| pr_debug("governor switch\n"); | |
| /* end old governor */ | |
| if (data->governor) | |
| __cpufreq_governor(data, CPUFREQ_GOV_STOP); | |
| /* start new governor */ | |
| data->governor = policy->governor; | |
| if (__cpufreq_governor(data, CPUFREQ_GOV_START)) { | |
| /* new governor failed, so re-start old one */ | |
| pr_debug("starting governor %s failed\n", | |
| data->governor->name); | |
| if (old_gov) { | |
| data->governor = old_gov; | |
| __cpufreq_governor(data, | |
| CPUFREQ_GOV_START); | |
| } | |
| ret = -EINVAL; | |
| goto error_out; | |
| } | |
| /* might be a policy change, too, so fall through */ | |
| } | |
| pr_debug("governor: change or update limits\n"); | |
| __cpufreq_governor(data, CPUFREQ_GOV_LIMITS); | |
| } | |
| error_out: | |
| return ret; | |
| } | |
| /** | |
| * cpufreq_update_policy - re-evaluate an existing cpufreq policy | |
| * @cpu: CPU which shall be re-evaluated | |
| * | |
| * Useful for policy notifiers which have different necessities | |
| * at different times. | |
| */ | |
| int cpufreq_update_policy(unsigned int cpu) | |
| { | |
| struct cpufreq_policy *data = cpufreq_cpu_get(cpu); | |
| struct cpufreq_policy policy; | |
| int ret; | |
| if (!data) { | |
| ret = -ENODEV; | |
| goto no_policy; | |
| } | |
| if (unlikely(lock_policy_rwsem_write(cpu))) { | |
| ret = -EINVAL; | |
| goto fail; | |
| } | |
| pr_debug("updating policy for CPU %u\n", cpu); | |
| memcpy(&policy, data, sizeof(struct cpufreq_policy)); | |
| policy.min = data->user_policy.min; | |
| policy.max = data->user_policy.max; | |
| policy.policy = data->user_policy.policy; | |
| policy.governor = data->user_policy.governor; | |
| /* BIOS might change freq behind our back | |
| -> ask driver for current freq and notify governors about a change */ | |
| if (cpufreq_driver->get) { | |
| policy.cur = cpufreq_driver->get(cpu); | |
| if (!data->cur) { | |
| pr_debug("Driver did not initialize current freq"); | |
| data->cur = policy.cur; | |
| } else { | |
| if (data->cur != policy.cur) | |
| cpufreq_out_of_sync(cpu, data->cur, | |
| policy.cur); | |
| } | |
| } | |
| ret = __cpufreq_set_policy(data, &policy); | |
| unlock_policy_rwsem_write(cpu); | |
| fail: | |
| cpufreq_cpu_put(data); | |
| no_policy: | |
| return ret; | |
| } | |
| EXPORT_SYMBOL(cpufreq_update_policy); | |
| static int __cpuinit cpufreq_cpu_callback(struct notifier_block *nfb, | |
| unsigned long action, void *hcpu) | |
| { | |
| unsigned int cpu = (unsigned long)hcpu; | |
| struct sys_device *sys_dev; | |
| sys_dev = get_cpu_sysdev(cpu); | |
| if (sys_dev) { | |
| switch (action) { | |
| case CPU_ONLINE: | |
| case CPU_ONLINE_FROZEN: | |
| cpufreq_add_dev(sys_dev); | |
| break; | |
| case CPU_DOWN_PREPARE: | |
| case CPU_DOWN_PREPARE_FROZEN: | |
| if (unlikely(lock_policy_rwsem_write(cpu))) | |
| BUG(); | |
| __cpufreq_remove_dev(sys_dev); | |
| break; | |
| case CPU_DOWN_FAILED: | |
| case CPU_DOWN_FAILED_FROZEN: | |
| cpufreq_add_dev(sys_dev); | |
| break; | |
| } | |
| } | |
| return NOTIFY_OK; | |
| } | |
| static struct notifier_block __refdata cpufreq_cpu_notifier = { | |
| .notifier_call = cpufreq_cpu_callback, | |
| }; | |
| /********************************************************************* | |
| * REGISTER / UNREGISTER CPUFREQ DRIVER * | |
| *********************************************************************/ | |
| /** | |
| * cpufreq_register_driver - register a CPU Frequency driver | |
| * @driver_data: A struct cpufreq_driver containing the values# | |
| * submitted by the CPU Frequency driver. | |
| * | |
| * Registers a CPU Frequency driver to this core code. This code | |
| * returns zero on success, -EBUSY when another driver got here first | |
| * (and isn't unregistered in the meantime). | |
| * | |
| */ | |
| int cpufreq_register_driver(struct cpufreq_driver *driver_data) | |
| { | |
| unsigned long flags; | |
| int ret; | |
| if (!driver_data || !driver_data->verify || !driver_data->init || | |
| ((!driver_data->setpolicy) && (!driver_data->target))) | |
| return -EINVAL; | |
| pr_debug("trying to register driver %s\n", driver_data->name); | |
| if (driver_data->setpolicy) | |
| driver_data->flags |= CPUFREQ_CONST_LOOPS; | |
| spin_lock_irqsave(&cpufreq_driver_lock, flags); | |
| if (cpufreq_driver) { | |
| spin_unlock_irqrestore(&cpufreq_driver_lock, flags); | |
| return -EBUSY; | |
| } | |
| cpufreq_driver = driver_data; | |
| spin_unlock_irqrestore(&cpufreq_driver_lock, flags); | |
| ret = sysdev_driver_register(&cpu_sysdev_class, | |
| &cpufreq_sysdev_driver); | |
| if (ret) | |
| goto err_null_driver; | |
| if (!(cpufreq_driver->flags & CPUFREQ_STICKY)) { | |
| int i; | |
| ret = -ENODEV; | |
| /* check for at least one working CPU */ | |
| for (i = 0; i < nr_cpu_ids; i++) | |
| if (cpu_possible(i) && per_cpu(cpufreq_cpu_data, i)) { | |
| ret = 0; | |
| break; | |
| } | |
| /* if all ->init() calls failed, unregister */ | |
| if (ret) { | |
| pr_debug("no CPU initialized for driver %s\n", | |
| driver_data->name); | |
| goto err_sysdev_unreg; | |
| } | |
| } | |
| register_hotcpu_notifier(&cpufreq_cpu_notifier); | |
| pr_debug("driver %s up and running\n", driver_data->name); | |
| return 0; | |
| err_sysdev_unreg: | |
| sysdev_driver_unregister(&cpu_sysdev_class, | |
| &cpufreq_sysdev_driver); | |
| err_null_driver: | |
| spin_lock_irqsave(&cpufreq_driver_lock, flags); | |
| cpufreq_driver = NULL; | |
| spin_unlock_irqrestore(&cpufreq_driver_lock, flags); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_GPL(cpufreq_register_driver); | |
| /** | |
| * cpufreq_unregister_driver - unregister the current CPUFreq driver | |
| * | |
| * Unregister the current CPUFreq driver. Only call this if you have | |
| * the right to do so, i.e. if you have succeeded in initialising before! | |
| * Returns zero if successful, and -EINVAL if the cpufreq_driver is | |
| * currently not initialised. | |
| */ | |
| int cpufreq_unregister_driver(struct cpufreq_driver *driver) | |
| { | |
| unsigned long flags; | |
| if (!cpufreq_driver || (driver != cpufreq_driver)) | |
| return -EINVAL; | |
| pr_debug("unregistering driver %s\n", driver->name); | |
| sysdev_driver_unregister(&cpu_sysdev_class, &cpufreq_sysdev_driver); | |
| unregister_hotcpu_notifier(&cpufreq_cpu_notifier); | |
| spin_lock_irqsave(&cpufreq_driver_lock, flags); | |
| cpufreq_driver = NULL; | |
| spin_unlock_irqrestore(&cpufreq_driver_lock, flags); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(cpufreq_unregister_driver); | |
| static int __init cpufreq_core_init(void) | |
| { | |
| int cpu; | |
| for_each_possible_cpu(cpu) { | |
| per_cpu(cpufreq_policy_cpu, cpu) = -1; | |
| init_rwsem(&per_cpu(cpu_policy_rwsem, cpu)); | |
| } | |
| cpufreq_global_kobject = kobject_create_and_add("cpufreq", | |
| &cpu_sysdev_class.kset.kobj); | |
| BUG_ON(!cpufreq_global_kobject); | |
| register_syscore_ops(&cpufreq_syscore_ops); | |
| return 0; | |
| } | |
| core_initcall(cpufreq_core_init); |