| /* | |
| * cpuidle.c - core cpuidle infrastructure | |
| * | |
| * (C) 2006-2007 Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> | |
| * Shaohua Li <shaohua.li@intel.com> | |
| * Adam Belay <abelay@novell.com> | |
| * | |
| * This code is licenced under the GPL. | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/mutex.h> | |
| #include <linux/sched.h> | |
| #include <linux/notifier.h> | |
| #include <linux/pm_qos_params.h> | |
| #include <linux/cpu.h> | |
| #include <linux/cpuidle.h> | |
| #include <linux/ktime.h> | |
| #include <linux/hrtimer.h> | |
| #include <trace/events/power.h> | |
| #include "cpuidle.h" | |
| DEFINE_PER_CPU(struct cpuidle_device *, cpuidle_devices); | |
| DEFINE_MUTEX(cpuidle_lock); | |
| LIST_HEAD(cpuidle_detected_devices); | |
| static void (*pm_idle_old)(void); | |
| static int enabled_devices; | |
| #if defined(CONFIG_ARCH_HAS_CPU_IDLE_WAIT) | |
| static void cpuidle_kick_cpus(void) | |
| { | |
| cpu_idle_wait(); | |
| } | |
| #elif defined(CONFIG_SMP) | |
| # error "Arch needs cpu_idle_wait() equivalent here" | |
| #else /* !CONFIG_ARCH_HAS_CPU_IDLE_WAIT && !CONFIG_SMP */ | |
| static void cpuidle_kick_cpus(void) {} | |
| #endif | |
| static int __cpuidle_register_device(struct cpuidle_device *dev); | |
| /** | |
| * cpuidle_idle_call - the main idle loop | |
| * | |
| * NOTE: no locks or semaphores should be used here | |
| */ | |
| static void cpuidle_idle_call(void) | |
| { | |
| struct cpuidle_device *dev = __this_cpu_read(cpuidle_devices); | |
| struct cpuidle_state *target_state; | |
| int next_state; | |
| /* check if the device is ready */ | |
| if (!dev || !dev->enabled) { | |
| if (pm_idle_old) | |
| pm_idle_old(); | |
| else | |
| #if defined(CONFIG_ARCH_HAS_DEFAULT_IDLE) | |
| default_idle(); | |
| #else | |
| local_irq_enable(); | |
| #endif | |
| return; | |
| } | |
| #if 0 | |
| /* shows regressions, re-enable for 2.6.29 */ | |
| /* | |
| * run any timers that can be run now, at this point | |
| * before calculating the idle duration etc. | |
| */ | |
| hrtimer_peek_ahead_timers(); | |
| #endif | |
| /* | |
| * Call the device's prepare function before calling the | |
| * governor's select function. ->prepare gives the device's | |
| * cpuidle driver a chance to update any dynamic information | |
| * of its cpuidle states for the current idle period, e.g. | |
| * state availability, latencies, residencies, etc. | |
| */ | |
| if (dev->prepare) | |
| dev->prepare(dev); | |
| /* ask the governor for the next state */ | |
| next_state = cpuidle_curr_governor->select(dev); | |
| if (need_resched()) { | |
| local_irq_enable(); | |
| return; | |
| } | |
| target_state = &dev->states[next_state]; | |
| /* enter the state and update stats */ | |
| dev->last_state = target_state; | |
| trace_power_start(POWER_CSTATE, next_state, dev->cpu); | |
| trace_cpu_idle(next_state, dev->cpu); | |
| dev->last_residency = target_state->enter(dev, target_state); | |
| trace_power_end(dev->cpu); | |
| trace_cpu_idle(PWR_EVENT_EXIT, dev->cpu); | |
| if (dev->last_state) | |
| target_state = dev->last_state; | |
| target_state->time += (unsigned long long)dev->last_residency; | |
| target_state->usage++; | |
| /* give the governor an opportunity to reflect on the outcome */ | |
| if (cpuidle_curr_governor->reflect) | |
| cpuidle_curr_governor->reflect(dev); | |
| } | |
| /** | |
| * cpuidle_install_idle_handler - installs the cpuidle idle loop handler | |
| */ | |
| void cpuidle_install_idle_handler(void) | |
| { | |
| if (enabled_devices && (pm_idle != cpuidle_idle_call)) { | |
| /* Make sure all changes finished before we switch to new idle */ | |
| smp_wmb(); | |
| pm_idle = cpuidle_idle_call; | |
| } | |
| } | |
| /** | |
| * cpuidle_uninstall_idle_handler - uninstalls the cpuidle idle loop handler | |
| */ | |
| void cpuidle_uninstall_idle_handler(void) | |
| { | |
| if (enabled_devices && pm_idle_old && (pm_idle != pm_idle_old)) { | |
| pm_idle = pm_idle_old; | |
| cpuidle_kick_cpus(); | |
| } | |
| } | |
| /** | |
| * cpuidle_pause_and_lock - temporarily disables CPUIDLE | |
| */ | |
| void cpuidle_pause_and_lock(void) | |
| { | |
| mutex_lock(&cpuidle_lock); | |
| cpuidle_uninstall_idle_handler(); | |
| } | |
| EXPORT_SYMBOL_GPL(cpuidle_pause_and_lock); | |
| /** | |
| * cpuidle_resume_and_unlock - resumes CPUIDLE operation | |
| */ | |
| void cpuidle_resume_and_unlock(void) | |
| { | |
| cpuidle_install_idle_handler(); | |
| mutex_unlock(&cpuidle_lock); | |
| } | |
| EXPORT_SYMBOL_GPL(cpuidle_resume_and_unlock); | |
| #ifdef CONFIG_ARCH_HAS_CPU_RELAX | |
| static int poll_idle(struct cpuidle_device *dev, struct cpuidle_state *st) | |
| { | |
| ktime_t t1, t2; | |
| s64 diff; | |
| int ret; | |
| t1 = ktime_get(); | |
| local_irq_enable(); | |
| while (!need_resched()) | |
| cpu_relax(); | |
| t2 = ktime_get(); | |
| diff = ktime_to_us(ktime_sub(t2, t1)); | |
| if (diff > INT_MAX) | |
| diff = INT_MAX; | |
| ret = (int) diff; | |
| return ret; | |
| } | |
| static void poll_idle_init(struct cpuidle_device *dev) | |
| { | |
| struct cpuidle_state *state = &dev->states[0]; | |
| cpuidle_set_statedata(state, NULL); | |
| snprintf(state->name, CPUIDLE_NAME_LEN, "POLL"); | |
| snprintf(state->desc, CPUIDLE_DESC_LEN, "CPUIDLE CORE POLL IDLE"); | |
| state->exit_latency = 0; | |
| state->target_residency = 0; | |
| state->power_usage = -1; | |
| state->flags = 0; | |
| state->enter = poll_idle; | |
| } | |
| #else | |
| static void poll_idle_init(struct cpuidle_device *dev) {} | |
| #endif /* CONFIG_ARCH_HAS_CPU_RELAX */ | |
| /** | |
| * cpuidle_enable_device - enables idle PM for a CPU | |
| * @dev: the CPU | |
| * | |
| * This function must be called between cpuidle_pause_and_lock and | |
| * cpuidle_resume_and_unlock when used externally. | |
| */ | |
| int cpuidle_enable_device(struct cpuidle_device *dev) | |
| { | |
| int ret, i; | |
| if (dev->enabled) | |
| return 0; | |
| if (!cpuidle_get_driver() || !cpuidle_curr_governor) | |
| return -EIO; | |
| if (!dev->state_count) | |
| return -EINVAL; | |
| if (dev->registered == 0) { | |
| ret = __cpuidle_register_device(dev); | |
| if (ret) | |
| return ret; | |
| } | |
| poll_idle_init(dev); | |
| if ((ret = cpuidle_add_state_sysfs(dev))) | |
| return ret; | |
| if (cpuidle_curr_governor->enable && | |
| (ret = cpuidle_curr_governor->enable(dev))) | |
| goto fail_sysfs; | |
| for (i = 0; i < dev->state_count; i++) { | |
| dev->states[i].usage = 0; | |
| dev->states[i].time = 0; | |
| } | |
| dev->last_residency = 0; | |
| dev->last_state = NULL; | |
| smp_wmb(); | |
| dev->enabled = 1; | |
| enabled_devices++; | |
| return 0; | |
| fail_sysfs: | |
| cpuidle_remove_state_sysfs(dev); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_GPL(cpuidle_enable_device); | |
| /** | |
| * cpuidle_disable_device - disables idle PM for a CPU | |
| * @dev: the CPU | |
| * | |
| * This function must be called between cpuidle_pause_and_lock and | |
| * cpuidle_resume_and_unlock when used externally. | |
| */ | |
| void cpuidle_disable_device(struct cpuidle_device *dev) | |
| { | |
| if (!dev->enabled) | |
| return; | |
| if (!cpuidle_get_driver() || !cpuidle_curr_governor) | |
| return; | |
| dev->enabled = 0; | |
| if (cpuidle_curr_governor->disable) | |
| cpuidle_curr_governor->disable(dev); | |
| cpuidle_remove_state_sysfs(dev); | |
| enabled_devices--; | |
| } | |
| EXPORT_SYMBOL_GPL(cpuidle_disable_device); | |
| /** | |
| * __cpuidle_register_device - internal register function called before register | |
| * and enable routines | |
| * @dev: the cpu | |
| * | |
| * cpuidle_lock mutex must be held before this is called | |
| */ | |
| static int __cpuidle_register_device(struct cpuidle_device *dev) | |
| { | |
| int ret; | |
| struct sys_device *sys_dev = get_cpu_sysdev((unsigned long)dev->cpu); | |
| struct cpuidle_driver *cpuidle_driver = cpuidle_get_driver(); | |
| if (!sys_dev) | |
| return -EINVAL; | |
| if (!try_module_get(cpuidle_driver->owner)) | |
| return -EINVAL; | |
| init_completion(&dev->kobj_unregister); | |
| /* | |
| * cpuidle driver should set the dev->power_specified bit | |
| * before registering the device if the driver provides | |
| * power_usage numbers. | |
| * | |
| * For those devices whose ->power_specified is not set, | |
| * we fill in power_usage with decreasing values as the | |
| * cpuidle code has an implicit assumption that state Cn | |
| * uses less power than C(n-1). | |
| * | |
| * With CONFIG_ARCH_HAS_CPU_RELAX, C0 is already assigned | |
| * an power value of -1. So we use -2, -3, etc, for other | |
| * c-states. | |
| */ | |
| if (!dev->power_specified) { | |
| int i; | |
| for (i = CPUIDLE_DRIVER_STATE_START; i < dev->state_count; i++) | |
| dev->states[i].power_usage = -1 - i; | |
| } | |
| per_cpu(cpuidle_devices, dev->cpu) = dev; | |
| list_add(&dev->device_list, &cpuidle_detected_devices); | |
| if ((ret = cpuidle_add_sysfs(sys_dev))) { | |
| module_put(cpuidle_driver->owner); | |
| return ret; | |
| } | |
| dev->registered = 1; | |
| return 0; | |
| } | |
| /** | |
| * cpuidle_register_device - registers a CPU's idle PM feature | |
| * @dev: the cpu | |
| */ | |
| int cpuidle_register_device(struct cpuidle_device *dev) | |
| { | |
| int ret; | |
| mutex_lock(&cpuidle_lock); | |
| if ((ret = __cpuidle_register_device(dev))) { | |
| mutex_unlock(&cpuidle_lock); | |
| return ret; | |
| } | |
| cpuidle_enable_device(dev); | |
| cpuidle_install_idle_handler(); | |
| mutex_unlock(&cpuidle_lock); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(cpuidle_register_device); | |
| /** | |
| * cpuidle_unregister_device - unregisters a CPU's idle PM feature | |
| * @dev: the cpu | |
| */ | |
| void cpuidle_unregister_device(struct cpuidle_device *dev) | |
| { | |
| struct sys_device *sys_dev = get_cpu_sysdev((unsigned long)dev->cpu); | |
| struct cpuidle_driver *cpuidle_driver = cpuidle_get_driver(); | |
| if (dev->registered == 0) | |
| return; | |
| cpuidle_pause_and_lock(); | |
| cpuidle_disable_device(dev); | |
| cpuidle_remove_sysfs(sys_dev); | |
| list_del(&dev->device_list); | |
| wait_for_completion(&dev->kobj_unregister); | |
| per_cpu(cpuidle_devices, dev->cpu) = NULL; | |
| cpuidle_resume_and_unlock(); | |
| module_put(cpuidle_driver->owner); | |
| } | |
| EXPORT_SYMBOL_GPL(cpuidle_unregister_device); | |
| #ifdef CONFIG_SMP | |
| static void smp_callback(void *v) | |
| { | |
| /* we already woke the CPU up, nothing more to do */ | |
| } | |
| /* | |
| * This function gets called when a part of the kernel has a new latency | |
| * requirement. This means we need to get all processors out of their C-state, | |
| * and then recalculate a new suitable C-state. Just do a cross-cpu IPI; that | |
| * wakes them all right up. | |
| */ | |
| static int cpuidle_latency_notify(struct notifier_block *b, | |
| unsigned long l, void *v) | |
| { | |
| smp_call_function(smp_callback, NULL, 1); | |
| return NOTIFY_OK; | |
| } | |
| static struct notifier_block cpuidle_latency_notifier = { | |
| .notifier_call = cpuidle_latency_notify, | |
| }; | |
| static inline void latency_notifier_init(struct notifier_block *n) | |
| { | |
| pm_qos_add_notifier(PM_QOS_CPU_DMA_LATENCY, n); | |
| } | |
| #else /* CONFIG_SMP */ | |
| #define latency_notifier_init(x) do { } while (0) | |
| #endif /* CONFIG_SMP */ | |
| /** | |
| * cpuidle_init - core initializer | |
| */ | |
| static int __init cpuidle_init(void) | |
| { | |
| int ret; | |
| pm_idle_old = pm_idle; | |
| ret = cpuidle_add_class_sysfs(&cpu_sysdev_class); | |
| if (ret) | |
| return ret; | |
| latency_notifier_init(&cpuidle_latency_notifier); | |
| return 0; | |
| } | |
| core_initcall(cpuidle_init); |